summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-13 18:27:40 -0600
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-13 18:27:40 -0600
commitf0094b28f3038936c1985be64dbe83f0e950b671 (patch)
treec3a61d5583cc2b39f65ef3b01e6660696b359656 /Documentation/devicetree
parent13b102bf48d39d84d87bee31544f4588502649b6 (diff)
parent61dac43ee6bedd8507294c7af8959157b686c221 (diff)
downloadlinux-f0094b28f3038936c1985be64dbe83f0e950b671.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: "Several networking final fixes and tidies for the merge window: 1) Changes during the merge window unintentionally took away the ability to build bluetooth modular, fix from Geert Uytterhoeven. 2) Several phy_node reference count bug fixes from Uwe Kleine-König. 3) Fix ucc_geth build failures, also from Uwe Kleine-König. 4) Fix klog false positivies when netlink messages go to network taps, by properly resetting the network header. Fix from Daniel Borkmann. 5) Sizing estimate of VF netlink messages is too small, from Jiri Benc. 6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian. 7) VLAN untagging is erroneously dependent upon whether the VLAN module is loaded or not, but there are generic dependencies that matter wrt what can be expected as the SKB enters the stack. Make the basic untagging generic code, and do it unconditionally. From Vlad Yasevich. 8) xen-netfront only has so many slots in it's transmit queue so linearize packets that have too many frags. From Zoltan Kiss. 9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits) net: bcmgenet: correctly resume adapter from Wake-on-LAN net: bcmgenet: update UMAC_CMD only when link is detected net: bcmgenet: correctly suspend and resume PHY device net: bcmgenet: request and enable main clock earlier net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call xen-netfront: Fix handling packets on compound pages with skb_linearize net: fec: Support phys probed from devicetree and fixed-link smsc: replace WARN_ON() with WARN_ON_SMP() xen-netback: Don't deschedule NAPI when carrier off net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile wan: wanxl: Remove typedefs from struct names m68k/atari: EtherNEC - ethernet support (ne) net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call hdlc: Remove typedefs from struct names airo_cs: Remove typedef local_info_t atmel: Remove typedef atmel_priv_ioctl com20020_cs: Remove typedef com20020_dev_t ethernet: amd: Remove typedef local_info_t net: Always untag vlan-tagged traffic on input. drivers: net: Add APM X-Gene SoC ethernet driver support. ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/net/apm-xgene-enet.txt66
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt29
2 files changed, 94 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
new file mode 100644
index 000000000000..ebcad25efd0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,66 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC.
+
+Required properties:
+- compatible: Should be "apm,xgene-enet"
+- reg: Address and length of the register set for the device. It contains the
+ information of registers in the same order as described by reg-names
+- reg-names: Should contain the register set names
+ - "enet_csr": Ethernet control and status register address space
+ - "ring_csr": Descriptor ring control and status register address space
+ - "ring_cmd": Descriptor ring command register address space
+- interrupts: Ethernet main interrupt
+- clocks: Reference to the clock entry.
+- local-mac-address: MAC address assigned to this device
+- phy-connection-type: Interface type between ethernet device and PHY device
+- phy-handle: Reference to a PHY node connected to this device
+
+- mdio: Device tree subnode with the following required properties:
+ - compatible: Must be "apm,xgene-mdio".
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+
+ For the phy on the mdio bus, there must be a node with the following fields:
+ - compatible: PHY identifier. Please refer ./phy.txt for the format.
+ - reg: The ID number for the phy.
+
+Optional properties:
+- status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
+
+Example:
+ menetclk: menetclk {
+ compatible = "apm,xgene-device-clock";
+ clock-output-names = "menetclk";
+ status = "ok";
+ };
+
+ menet: ethernet@17020000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x17020000 0x0 0xd100>,
+ <0x0 0X17030000 0x0 0X400>,
+ <0x0 0X10000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x3c 0x4>;
+ clocks = <&menetclk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "rgmii";
+ phy-handle = <&menetphy>;
+ mdio {
+ compatible = "apm,xgene-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ menetphy: menetphy@3 {
+ compatible = "ethernet-phy-id001c.c915";
+ reg = <0x3>;
+ };
+
+ };
+ };
+
+/* Board-specific peripheral configurations */
+&menet {
+ status = "ok";
+};
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 6bc84adb10c0..8a2c7b55ec16 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -12,7 +12,14 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
-- phy-supply: regulator that powers the Ethernet PHY.
+- phy-supply : regulator that powers the Ethernet PHY.
+- phy-handle : phandle to the PHY device connected to this device.
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+
+Optional subnodes:
+- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
+ according to phy.txt in the same directory
Example:
@@ -25,3 +32,23 @@ ethernet@83fec000 {
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <&reg_fec_supply>;
};
+
+Example with phy specified:
+
+ethernet@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
+ phy-handle = <&ethphy>;
+ mdio {
+ ethphy: ethernet-phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <6>;
+ max-speed = <100>;
+ };
+ };
+};