summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 14:27:06 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 14:27:06 -0800
commit70e71ca0af244f48a5dcf56dc435243792e3a495 (patch)
treef7d9c4c4d9a857a00043e9bf6aa2d6f533a34778 /Documentation/devicetree
parentbae41e45b7400496b9bf0c70c6004419d9987819 (diff)
parent00c83b01d58068dfeb2e1351cca6fccf2a83fa8f (diff)
downloadlinux-70e71ca0af244f48a5dcf56dc435243792e3a495.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/btmrvl.txt29
-rw-r--r--Documentation/devicetree/bindings/bus/bcma.txt21
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe.txt12
-rw-r--r--Documentation/devicetree/bindings/net/can/c_can.txt5
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt9
-rw-r--r--Documentation/devicetree/bindings/net/micrel.txt35
-rw-r--r--Documentation/devicetree/bindings/net/phy.txt3
-rw-r--r--Documentation/devicetree/bindings/net/sh_eth.txt1
8 files changed, 100 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt
new file mode 100644
index 000000000000..58f964bb0a52
--- /dev/null
+++ b/Documentation/devicetree/bindings/btmrvl.txt
@@ -0,0 +1,29 @@
+btmrvl
+------
+
+Required properties:
+
+ - compatible : must be "btmrvl,cfgdata"
+
+Optional properties:
+
+ - btmrvl,cal-data : Calibration data downloaded to the device during
+ initialization. This is an array of 28 values(u8).
+
+ - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
+ configured.
+
+Example:
+
+GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
+in below example.
+
+btmrvl {
+ compatible = "btmrvl,cfgdata";
+
+ btmrvl,cal-data = /bits/ 8 <
+ 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+ 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0xf0 0x00>;
+ btmrvl,gpio-gap = <0x0d64>;
+};
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/bcma.txt
index 62a48348ac15..edd44d802139 100644
--- a/Documentation/devicetree/bindings/bus/bcma.txt
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
@@ -8,6 +8,11 @@ Required properties:
The cores on the AXI bus are automatically detected by bcma with the
memory ranges they are using and they get registered afterwards.
+Automatic detection of the IRQ number is not working on
+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
+them manually through device tree. Use an interrupt-map to specify the
+IRQ used by the devices on the bus. The first address is just an index,
+because we do not have any special register.
The top-level axi bus may contain children representing attached cores
(devices). This is needed since some hardware details can't be auto
@@ -22,6 +27,22 @@ Example:
ranges = <0x00000000 0x18000000 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* Ethernet Controller 0 */
+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
chipcommon {
reg = <0x00000000 0x1000>;
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
index 41354f730beb..26efd526d16c 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -7,7 +7,10 @@ Required properties:
- PCS registers
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
-- interrupts: Should contain the amd-xgbe interrupt
+- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
+ listed is required and is the general device interrupt. If the optional
+ amd,per-channel-interrupt property is specified, then one additional
+ interrupt for each DMA channel supported by the device should be specified
- clocks:
- DMA clock for the amd-xgbe device (used for calculating the
correct Rx interrupt watchdog timer value on a DMA channel
@@ -23,6 +26,9 @@ Optional properties:
- mac-address: mac address to be assigned to the device. Can be overridden
by UEFI.
- dma-coherent: Present if dma operations are coherent
+- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
+ a unique interrupt for each DMA channel - this requires an additional
+ interrupt be configured for each DMA channel
Example:
xgbe@e0700000 {
@@ -30,7 +36,9 @@ Example:
reg = <0 0xe0700000 0 0x80000>,
<0 0xe0780000 0 0x80000>;
interrupt-parent = <&gic>;
- interrupts = <0 325 4>;
+ interrupts = <0 325 4>,
+ <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>;
+ amd,per-channel-interrupt;
clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
clock-names = "dma_clk", "ptp_clk";
phy-handle = <&phy>;
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
index 8f1ae81228e3..5a1d8b0c39e9 100644
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ b/Documentation/devicetree/bindings/net/can/c_can.txt
@@ -4,6 +4,8 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
Required properties:
- compatible : Should be "bosch,c_can" for C_CAN controllers and
"bosch,d_can" for D_CAN controllers.
+ Can be "ti,dra7-d_can", "ti,am3352-d_can" or
+ "ti,am4372-d_can".
- reg : physical base address and size of the C_CAN/D_CAN
registers map
- interrupts : property with a value describing the interrupt
@@ -12,6 +14,9 @@ Required properties:
Optional properties:
- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the
instance number
+- syscon-raminit : Handle to system control region that contains the
+ RAMINIT register, register offset to the RAMINIT
+ register and the CAN instance number (0 offset).
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index a62c889aafca..e124847443f8 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -10,7 +10,7 @@ Required properties:
- dsa,ethernet : Should be a phandle to a valid Ethernet device node
- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
-Optionnal properties:
+Optional properties:
- interrupts : property with a value describing the switch
interrupt number (not supported by the driver)
@@ -23,6 +23,13 @@ Each of these switch child nodes should have the following required properties:
- #address-cells : Must be 1
- #size-cells : Must be 0
+A switch child node has the following optional property:
+
+- eeprom-length : Set to the length of an EEPROM connected to the
+ switch. Must be set if the switch can not detect
+ the presence and/or size of a connected EEPROM,
+ otherwise optional.
+
A switch may have multiple "port" children nodes
Each port children node must have the following mandatory properties:
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index e1d99b95c4ec..87496a8c64ab 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -6,19 +6,32 @@ Optional properties:
- micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
- Configure the LED mode with single value. The list of PHYs and
- the bits that are currently supported:
+ Configure the LED mode with single value. The list of PHYs and the
+ bits that are currently supported:
- KSZ8001: register 0x1e, bits 15..14
- KSZ8041: register 0x1e, bits 15..14
- KSZ8021: register 0x1f, bits 5..4
- KSZ8031: register 0x1f, bits 5..4
- KSZ8051: register 0x1f, bits 5..4
+ KSZ8001: register 0x1e, bits 15..14
+ KSZ8041: register 0x1e, bits 15..14
+ KSZ8021: register 0x1f, bits 5..4
+ KSZ8031: register 0x1f, bits 5..4
+ KSZ8051: register 0x1f, bits 5..4
+ KSZ8081: register 0x1f, bits 5..4
+ KSZ8091: register 0x1f, bits 5..4
- See the respective PHY datasheet for the mode values.
+ See the respective PHY datasheet for the mode values.
+
+ - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
+ bit selects 25 MHz mode
+
+ Setting the RMII Reference Clock Select bit enables 25 MHz rather
+ than 50 MHz clock mode.
+
+ Note that this option in only needed for certain PHY revisions with a
+ non-standard, inverted function of this configuration bit.
+ Specifically, a clock reference ("rmii-ref" below) is always needed to
+ actually select a mode.
- clocks, clock-names: contains clocks according to the common clock bindings.
- supported clocks:
- - KSZ8021, KSZ8031: "rmii-ref": The RMII refence input clock. Used
- to determine the XI input clock.
+ supported clocks:
+ - KSZ8021, KSZ8031, KSZ8081, KSZ8091: "rmii-ref": The RMII reference
+ input clock. Used to determine the XI input clock.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 5b8c58903077..40831fbaff72 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,7 +19,6 @@ Optional Properties:
specifications. If neither of these are specified, the default is to
assume clause 22. The compatible list may also contain other
elements.
-- max-speed: Maximum PHY supported speed (10, 100, 1000...)
If the phy's identifier is known then the list may contain an entry
of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -29,6 +28,8 @@ Optional Properties:
4 hex digits. This is the chip vendor OUI bits 19:24,
followed by 10 bits of a vendor specific ID.
+- max-speed: Maximum PHY supported speed (10, 100, 1000...)
+
Example:
ethernet-phy@0 {
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 34d4db1a4e25..2f6ec85fda8e 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -9,6 +9,7 @@ Required properties:
"renesas,ether-r8a7779" if the device is a part of R8A7779 SoC.
"renesas,ether-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,ether-r8a7791" if the device is a part of R8A7791 SoC.
+ "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC.
"renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
- reg: offset and length of (1) the E-DMAC/feLic register block (required),