summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorCaesar Wang <wxt@rock-chips.com>2016-05-03 20:07:41 +0800
committerZhang Rui <rui.zhang@intel.com>2016-08-19 21:33:37 +0800
commit55f2ac33adc78d429c470c9ca05e18c36dc24922 (patch)
tree16f9aed184fbdb2747ffbf071a16ee21b1878567 /Documentation/devicetree
parent57027db00d1094d0abd5776899b00ca55d42d37c (diff)
downloadlinux-55f2ac33adc78d429c470c9ca05e18c36dc24922.tar.bz2
thermal: trivial: fix the typo
See the thermal code, the obvious typo from my editor. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal.txt10
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 41b817f7b670..88b6ea1ad290 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
Required properties:
- #cooling-cells: Used to provide cooling device specific information
Type: unsigned while referring to it. Must be at least 2, in order
- Size: one cell to specify minimum and maximum cooling state used
+ Size: one cell to specify minimum and maximum cooling state used
in the reference. The first cell is the minimum
cooling state requested and the second cell is
the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@ Required properties:
Optional property:
- contribution: The cooling contribution to the thermal zone of the
Type: unsigned referred cooling device at the referred trip point.
- Size: one cell The contribution is a ratio of the sum
+ Size: one cell The contribution is a ratio of the sum
of all cooling contributions within a thermal zone.
Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@ Required properties:
Size: one cell
- thermal-sensors: A list of thermal sensor phandles and sensor specifier
- Type: list of used while monitoring the thermal zone.
+ Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier
@@ -473,7 +473,7 @@ thermal-zones {
<&adc>; /* pcb north */
/* hotspot = 100 * bandgap - 120 * adc + 484 */
- coefficients = <100 -120 484>;
+ coefficients = <100 -120 484>;
trips {
...
@@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
thermal-sensors = <&adc>;
/* hotspot = 1 * adc + 6000 */
- coefficients = <1 6000>;
+ coefficients = <1 6000>;
(d) - Board thermal