diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-16 16:05:01 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-16 16:05:01 -0800 |
commit | cf9b0772f2e410645fece13b749bd56505b998b8 (patch) | |
tree | 8b171a2c49d1e9e41d4e43fb91602e664cde8551 /Documentation/devicetree | |
parent | 527d1470744d338c912f94bc1f4dba08ffdff349 (diff) | |
parent | 339cd0ea082287ea8e2b7e7159a5a33665a2cbe3 (diff) | |
download | linux-cf9b0772f2e410645fece13b749bd56505b998b8.tar.bz2 |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
Diffstat (limited to 'Documentation/devicetree')
14 files changed, 368 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bed..790e6b0b8306 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example: diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 088584a98cf4..779f5614bcee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -4,7 +4,6 @@ Properties: - compatible : should contain two values. First value must be one from following list: - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5260-pmu" - for Exynos5260 SoC. diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 20f26fbce875..7b40054be0d8 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -18,6 +18,8 @@ Required properties: * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt new file mode 100644 index 000000000000..82d923ef413f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt @@ -0,0 +1,27 @@ +DDR PHY Front End (DPFE) for Broadcom STB +========================================= + +DPFE and the DPFE firmware provide an interface for the host CPU to +communicate with the DCPU, which resides inside the DDR PHY. + +There are three memory regions for interacting with the DCPU. These are +specified in a single reg property. + +Required properties: + - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" + or "brcm,dpfe-cpu" + - reg: must reference three register ranges + - start address and length of the DCPU register space + - start address and length of the DCPU data memory space + - start address and length of the DCPU instruction memory space + - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; + they must be in the same order as the register declarations + +Example: + dpfe_cpu0: dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180 + 0xf1134000 0x1000 + 0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index e4e1cd91fb1f..356c29789cf5 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -11,3 +11,156 @@ Required properties: The experimental -viper variants are for running Linux on the 3384's BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should be one of + "brcm,bcm7425-aon-ctrl" + "brcm,bcm7429-aon-ctrl" + "brcm,bcm7435-aon-ctrl" and + "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +syscon@410000 { + compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" +- ranges : should contain the child address in the parent address + space, must be 0 here, and the register start and length of + the entire memory controller (including all sub nodes: DDR PHY, + arbiter, etc.) +- #address-cells : must be 1 +- #size-cells : must be 1 + +Example: + + memory-controller@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges = <0x0 0x0 0xa000>; + #address-cells = <1>; + #size-cells = <1>; + + memc-arb@1000 { + ... + }; + + memc-ddr@2000 { + ... + }; + + ddr-phy@6000 { + ... + }; + }; + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v64.5" + "brcm,brcmstb-ddr-phy" + +- reg : the DDR PHY register range and length + +Example: + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v64.5"; + reg = <0x6000 0xc8>; + }; + +== DDR memory controller sequencer + +Control registers for this memory controller's DDR memory sequencer + +Required properties: +- compatible : should contain one of these + "brcm,bcm7425-memc-ddr" + "brcm,bcm7429-memc-ddr" + "brcm,bcm7435-memc-ddr" and + "brcm,brcmstb-memc-ddr" + +- reg : the DDR sequencer register range and length + +Example: + + memc-ddr@2000 { + compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x300>; + }; + +== MEMC Arbiter + +The memory controller arbiter is responsible for memory clients allocation +(bandwidth, priorities etc.) and needs to have its contents restored during +deep sleep states (S3). + +Required properties: + +- compatible : should contain one of these + "brcm,brcmstb-memc-arb-v10.0.0.0" + "brcm,brcmstb-memc-arb" + +- reg : the DDR Arbiter register range and length + +Example: + + memc-arb@1000 { + compatible = "brcm,brcmstb-memc-arb-v10.0.0.0"; + reg = <0x1000 0x248>; + }; + +== Timers + +The Broadcom STB chips contain a timer block with several general purpose +timers that can be used. + +Required properties: + +- compatible : should contain one of: + "brcm,bcm7425-timers" + "brcm,bcm7429-timers" + "brcm,bcm7435-timers and + "brcm,brcmstb-timers" +- reg : the timers register range +- interrupts : the interrupt line for this timer block + +Example: + + timers: timer@4067c0 { + compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers"; + reg = <0x4067c0 0x40>; + interrupts = <&periph_intc 19>; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 000000000000..1cd050b4054c --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,61 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power_domain.txt + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 98cc8c09d02d..8690f10426a3 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 000000000000..8562ba1dce69 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: <prop-encoded-array> + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: <prop-encoded-array> + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: <u32> + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: <u32> + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index e5a03ffe04fb..a8014f3ab8ba 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 000000000000..32d8435a41df --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 68a6f487c409..93efed629900 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -13,6 +13,7 @@ Required properties: "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-reset" - for LD11 SoC "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -44,6 +45,7 @@ Required properties: "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -74,6 +76,7 @@ Required properties: "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-peri-reset" - for LD11 SoC "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt index 47ac834414d8..48eed140765b 100644 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -65,8 +65,8 @@ to the respective BMan instance BMan Private Memory Node BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a -node under the /reserved-memory node +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. The BMan FBPR memory node must be named "bman-fbpr" @@ -75,7 +75,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,bman-fbpr" + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FBPR private memory: - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to @@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node ranges; bman_fbpr: bman-fbpr { - compatible = "fsl,bman-fbpr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-mem-pool"; size = <0 0x1000000>; alignment = <0 0x1000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt index 556ebb8be75d..ee96afd2af72 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc Value type: <prop-encoded-array> Definition: Reference input clock. Its frequency is half of the platform clock +- memory-regions + Usage: Required for ARM + Value type: <phandle array> + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM Devices connected to a QMan instance via Direct Connect Portals (DCP) must link to the respective QMan instance @@ -74,7 +80,9 @@ QMan Private Memory Nodes QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a nodes under the /reserved-memory node +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt The QMan FQD memory node must be named "qman-fqd" @@ -83,7 +91,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-fqd" + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The QMan PFDR memory node must be named "qman-pfdr" @@ -92,7 +102,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-pfdr" + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to @@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes ranges; qman_fqd: qman-fqd { - compatible = "fsl,qman-fqd"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; + no-map; }; qman_pfdr: qman-pfdr { - compatible = "fsl,qman-pfdr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x2000000>; alignment = <0 0x2000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 107700d00df4..bf80e3f96f8c 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC @@ -36,9 +37,12 @@ Required properties in pwrap device node. - clocks: Must contain an entry for each entry in clock-names. Optional properities: -- pmic: Mediatek PMIC MFD is the child device of pwrap +- pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt + or the regulator-only device as the child device of pwrap, such as MT6380. + See the following definitions for such kinds of devices. + Documentation/devicetree/bindings/regulator/mt6380-regulator.txt Example: pwrap: pwrap@1000f000 { |