diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-07 10:37:54 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-07 10:37:54 -0700 |
commit | dd6ec12f3bf83ca3c4e712a9f35960aec779f6f9 (patch) | |
tree | 8b6f9f187eb0ae621a64798270c420143c698484 /Documentation/devicetree | |
parent | 21c19bc7ee256094aba74af8d91a824da4bc36af (diff) | |
parent | a4485b545e2fad4d65732cb7c60089bf4246de5c (diff) | |
download | linux-dd6ec12f3bf83ca3c4e712a9f35960aec779f6f9.tar.bz2 |
Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- vsprintf format specifier %pOF for device_node's. This will enable us
to stop storing the full node names. Conversion of users will happen
next cycle.
- Update documentation to point to DT specification instead of ePAPR.
- Split out graph and property functions to a separate file.
- New of-graph functions for ALSA
- Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
Itead, and BananaPi.
- Improve dtx_diff utility filename printing.
* tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits)
of: document /sys/firmware/fdt
dt-bindings: Add RISC-V vendor prefix
vsprintf: Add %p extension "%pOF" for device tree
of: find_node_by_full_name rewrite to compare each level
of: use kbasename instead of open coding
dt-bindings: thermal: add file extension to brcm,ns-thermal
of: update ePAPR references to point to Devicetree Specification
scripts/dtc: dtx_diff - Show real file names in diff header
of: detect invalid phandle in overlay
of: be consistent in form of file mode
of: make __of_attach_node() static
of: address.c header comment typo
of: fdt.c header comment typo
of: make of_fdt_is_compatible() static
dt-bindings: display-timing.txt convert non-ascii characters to ascii
Documentation: remove overlay-notes reference to non-existent file
dt-bindings: usb: exynos-usb: Add missing required VDD properties
dt-bindings: Add vendor prefix for Linksys
MAINTAINERS: add device tree ABI documentation file
of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd
...
Diffstat (limited to 'Documentation/devicetree')
27 files changed, 73 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index 0f2153e8fa7e..9600761f2d5b 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -11,13 +11,6 @@ clusters, through memory mapped interface, with a global control register space and multiple sets of interface control registers, one per slave interface. -Bindings for the CCI node follow the ePAPR standard, available from: - -www.power.org/documentation/epapr-version-1-1/ - -with the addition of the bindings described in this document which are -specific to ARM. - * CCI interconnect node Description: Describes a CCI cache coherent Interconnect component @@ -50,10 +43,10 @@ specific to ARM. as a tuple of cells, containing child address, parent address and the size of the region in the child address space. - Definition: A standard property. Follow rules in the ePAPR for - hierarchical bus addressing. CCI interfaces - addresses refer to the parent node addressing - scheme to declare their register bases. + Definition: A standard property. Follow rules in the Devicetree + Specification for hierarchical bus addressing. CCI + interfaces addresses refer to the parent node + addressing scheme to declare their register bases. CCI interconnect node can define the following child nodes: diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index ad1913bea8d7..a44253cad269 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -6,9 +6,9 @@ The device tree allows to describe the layout of CPUs in a system through the "cpus" node, which in turn contains a number of subnodes (ie "cpu") defining properties for every cpu. -Bindings for CPU nodes follow the ePAPR v1.1 standard, available from: +Bindings for CPU nodes follow the Devicetree Specification, available from: -https://www.power.org/documentation/epapr-version-1-1/ +https://www.devicetree.org/specifications/ with updates for 32-bit and 64-bit ARM systems provided in this document. @@ -16,8 +16,8 @@ with updates for 32-bit and 64-bit ARM systems provided in this document. Convention used in this document ================================ -This document follows the conventions described in the ePAPR v1.1, with -the addition: +This document follows the conventions described in the Devicetree +Specification, with the addition: - square brackets define bitfields, eg reg[7:0] value of the bitfield in the reg property contained in bits 7 down to 0 @@ -26,8 +26,9 @@ the addition: cpus and cpu node bindings definition ===================================== -The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu -nodes to be present and contain the properties described below. +The ARM architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. - cpus node diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index b8e41c148a3c..7a591333f2b1 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -695,5 +695,5 @@ cpus { [4] ARM Architecture Reference Manuals http://infocenter.arm.com/help/index.jsp -[5] ePAPR standard - https://www.power.org/documentation/epapr-version-1-1/ +[5] Devicetree Specification + https://www.devicetree.org/specifications/ diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt index d9650c1788f4..fbe6cb21f4cf 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt @@ -4,8 +4,8 @@ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ PL310 and variants) based level 2 cache controller. All these various implementations of the L2 cache controller have compatible programming models (Note 1). Some of the properties that are just prefixed "cache-*" are taken from section -3.7.3 of the ePAPR v1.1 specification which can be found at: -https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf +3.7.3 of the Devicetree Specification which can be found at: +https://www.devicetree.org/specifications/ The ARM L2 cache representation in the device tree should be done as follows: diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt index 1061faf5f602..de9eb0486630 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/arm/topology.txt @@ -29,9 +29,9 @@ corresponding to the system hierarchy; syntactically they are defined as device tree nodes. The remainder of this document provides the topology bindings for ARM, based -on the ePAPR standard, available from: +on the Devicetree Specification, available from: -http://www.power.org/documentation/epapr-version-1-1/ +https://www.devicetree.org/specifications/ If not stated otherwise, whenever a reference to a cpu node phandle is made its value must point to a cpu node compliant with the cpu node bindings as diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt index d032237512c2..6f15037131ed 100644 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt @@ -10,7 +10,7 @@ enabled for child devices connected to the bus (either on-SoC or externally) to function. While "simple-pm-bus" follows the "simple-bus" set of properties, as specified -in ePAPR, it is not an extension of "simple-bus". +in the Devicetree Specification, it is not an extension of "simple-bus". Required properties: diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index b5e39af4ddc0..dee3f5d9df26 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -10,7 +10,8 @@ stdout-path property -------------------- Device trees may specify the device to be used for boot console output -with a stdout-path property under /chosen, as described in ePAPR, e.g. +with a stdout-path property under /chosen, as described in the Devicetree +Specification, e.g. / { chosen { diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index 3193979b1d05..697714f8d75c 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -1,6 +1,6 @@ Common properties -The ePAPR specification does not define any properties related to hardware +The Devicetree Specification does not define any properties related to hardware byteswapping, but endianness issues show up frequently in porting Linux to different machine types. This document attempts to provide a consistent way of handling byteswapping across drivers. diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 10a425f451fc..7aef0eae58d4 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -118,8 +118,8 @@ PROPERTIES Definition: A list of clock name strings in the same order as the clocks property. - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. EXAMPLE diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt index baf8a3c1b469..73b0eb950bb3 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -55,8 +55,8 @@ PROPERTIES triplet that includes the child address, parent address, & length. - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. EXAMPLE crypto@a0000 { diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt index 81a75893d1b8..58fa3e48481d 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -57,11 +57,11 @@ can be specified. The parameters are defined as: +----------+-------------------------------------+----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vback_porch | | | - | | ↓ | | | + | | v | | | +----------#######################################----------+-------+ - | # ↑ # | | + | # ^ # | | | # | # | | | hback # | # hfront | hsync | | porch # | hactive # porch | len | @@ -69,15 +69,15 @@ The parameters are defined as: | # | # | | | # |vactive # | | | # | # | | - | # ↓ # | | + | # v # | | +----------#######################################----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vfront_porch | | | - | | ↓ | | | + | | v | | | +----------+-------------------------------------+----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vsync_len | | | - | | ↓ | | | + | | v | | | +----------+-------------------------------------+----------+-------+ Example: diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt index fcb1c6a4787b..0415e2c53ba0 100644 --- a/Documentation/devicetree/bindings/graph.txt +++ b/Documentation/devicetree/bindings/graph.txt @@ -34,7 +34,7 @@ remote device, an 'endpoint' child node must be provided for each link. If more than one port is present in a device node or there is more than one endpoint at a port, or a port node needs to be associated with a selected hardware interface, a common scheme using '#address-cells', '#size-cells' -and 'reg' properties is used number the nodes. +and 'reg' properties is used to number the nodes. device { ... @@ -89,9 +89,9 @@ Links between endpoints Each endpoint should contain a 'remote-endpoint' phandle property that points to the corresponding endpoint in the port of the remote device. In turn, the -remote endpoint should contain a 'remote-endpoint' property. If it has one, -it must not point to another than the local endpoint. Two endpoints with their -'remote-endpoint' phandles pointing at each other form a link between the +remote endpoint should contain a 'remote-endpoint' property. If it has one, it +must not point to anything other than the local endpoint. Two endpoints with +their 'remote-endpoint' phandles pointing at each other form a link between the containing ports. device-1 { @@ -110,13 +110,12 @@ device-2 { }; }; - Required properties ------------------- If there is more than one 'port' or more than one 'endpoint' node or 'reg' -property is present in port and/or endpoint nodes the following properties -are required in a relevant parent node: +property present in the port and/or endpoint nodes then the following +properties are required in a relevant parent node: - #address-cells : number of cells required to define port/endpoint identifier, should be 1. diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index ae23dd8da736..38d74314b7ab 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -3,6 +3,7 @@ Austrian Microsystems AS3935 Franklin lightning sensor device driver Required properties: - compatible: must be "ams,as3935" - reg: SPI chip select number for the device + - spi-max-frequency: specifies maximum SPI clock frequency - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI slave node bindings. - interrupt-parent : should be the phandle for the interrupt controller @@ -21,6 +22,7 @@ Example: as3935@0 { compatible = "ams,as3935"; reg = <0>; + spi-max-frequency = <400000>; spi-cpha; interrupt-parent = <&gpio1>; interrupts = <16 1>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt index 909a902dff85..ccbbfdc53c72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt @@ -92,7 +92,6 @@ Example 2: * References -[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform - Requirements (ePAPR), Version 1.0, July 2008. - (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf) +[1] Devicetree Specification + (https://www.devicetree.org/specifications/) diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index edd7fd2bbbf9..7da86f22a13b 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -8,7 +8,8 @@ The following properties are common to the Ethernet controllers: property; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in ePAPR). + the maximum frame size (there's contradiction in the Devicetree + Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: * "internal" @@ -35,9 +36,11 @@ The following properties are common to the Ethernet controllers: * "rxaui" * "xaui" * "10gbase-kr" (10GBASE-KR, XFI, SFI) -- phy-connection-type: the same as "phy-mode" property but described in ePAPR; +- phy-connection-type: the same as "phy-mode" property but described in the + Devicetree Specification; - phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in ePAPR and so preferred; + device; this property is described in the Devicetree Specification and so + preferred; - phy: the same as "phy-handle" property, not recommended for new bindings. - phy-device: the same as "phy-handle" property, not recommended for new bindings. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index df873d1f3b7c..df873d1f3b7c 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 5dbf169cd81c..590f622188de 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -31,7 +31,7 @@ mmc3: mmc@01c12000 { non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index f8cd2397aa04..d63ab1dec16d 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -3,10 +3,10 @@ Power Architecture CPU Binding Copyright 2013 Freescale Semiconductor Inc. Power Architecture CPUs in Freescale SOCs are represented in device trees as -per the definition in ePAPR. +per the definition in the Devicetree Specification. -In addition to the ePAPR definitions, the properties defined below may be -present on CPU nodes. +In addition to the the Devicetree Specification definitions, the properties +defined below may be present on CPU nodes. PROPERTIES diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt index dc9bb3182525..8a70696395a7 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt @@ -1,7 +1,7 @@ Freescale L2 Cache Controller L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms. -The cache bindings explained below are ePAPR compliant +The cache bindings explained below are Devicetree Specification compliant Required Properties: diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt index b9a8a2bcfae7..0496ada4bba4 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt @@ -124,8 +124,8 @@ Port-Write Unit: A single IRQ that handles port-write conditions is specified by this property. (Typically shared with error). - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. Example: rmu: rmu@d3000 { diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt index 07abf0f2f440..86ee6ea73754 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt @@ -72,7 +72,8 @@ the following properties: represents the LIODN associated with maintenance transactions for the port. -Note: All other standard properties (see ePAPR) are allowed but are optional. +Note: All other standard properties (see the Devicetree Specification) +are allowed but are optional. Example: diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt index 68e047170039..68e047170039 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 9b4dbe3b2acc..78ebebb66dad 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -92,6 +92,8 @@ Required properties: parent's address space - clocks: Clock IDs array as required by the controller. - clock-names: names of clocks correseponding to IDs in the clock property + - vdd10-supply: 1.0V powr supply + - vdd33-supply: 3.0V/3.3V power supply Sub-nodes: The dwc3 core should be added as subnode to Exynos dwc3 glue. @@ -107,6 +109,8 @@ Example: #address-cells = <1>; #size-cells = <1>; ranges; + vdd10-supply = <&ldo11_reg>; + vdd33-supply = <&ldo9_reg>; dwc3 { compatible = "synopsys,dwc3"; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 286f4e1e111f..708ff2504260 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -45,6 +45,7 @@ avia avia semiconductor avic Shanghai AVIC Optoelectronics Co., Ltd. axentia Axentia Technologies AB axis Axis Communications AB +bananapi BIPAI KEJI LIMITED boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH boundary Boundary Devices Inc. @@ -159,6 +160,8 @@ iom Iomega Corporation isee ISEE 2007 S.L. isil Intersil issi Integrated Silicon Solutions Inc. +itead ITEAD Intelligent Systems Co.Ltd +iwave iWave Systems Technologies Pvt. Ltd. jdi Japan Display Inc. jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH @@ -177,6 +180,7 @@ lg LG Corporation libretech Shenzhen Libre Technology Co., Ltd licheepi Lichee Pi linaro Linaro Limited +linksys Belkin International, Inc. (Linksys) linux Linux-specific binding lltc Linear Technology Corporation lsi LSI Corp. (LSI Logic) @@ -269,8 +273,10 @@ renesas Renesas Electronics Corporation richtek Richtek Technology Corporation ricoh Ricoh Co. Ltd. rikomagic Rikomagic Tech Corp. Ltd +riscv RISC-V Foundation rockchip Fuzhou Rockchip Electronics Co., Ltd rohm ROHM Semiconductor Co., Ltd +roofull Shenzhen Roofull Technology Co, Ltd samsung Samsung Semiconductor samtec Samtec/Softing company sandisk Sandisk Corporation diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 280d283304bb..fb740445199f 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -1413,7 +1413,7 @@ Optional property: from DMA operations originating from the bus. It provides a means of defining a mapping or translation between the physical address space of the bus and the physical address space of the parent of the bus. - (for more information see ePAPR specification) + (for more information see the Devicetree Specification) * DMA Bus child Optional property: diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6ce9812..eb7f2685fda1 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -3,8 +3,7 @@ Device Tree Overlay Notes This document describes the implementation of the in-kernel device tree overlay functionality residing in drivers/of/overlay.c and is a -companion document to Documentation/devicetree/dt-object-internal.txt[1] & -Documentation/devicetree/dynamic-resolution-notes.txt[2] +companion document to Documentation/devicetree/dynamic-resolution-notes.txt[1] How overlays work ----------------- @@ -16,8 +15,7 @@ Since the kernel mainly deals with devices, any new device node that result in an active device should have it created while if the device node is either disabled or removed all together, the affected device should be deregistered. -Lets take an example where we have a foo board with the following base tree -which is taken from [1]. +Lets take an example where we have a foo board with the following base tree: ---- foo.dts ----------------------------------------------------------------- /* FOO platform */ @@ -36,7 +34,7 @@ which is taken from [1]. }; ---- foo.dts ----------------------------------------------------------------- -The overlay bar.dts, when loaded (and resolved as described in [2]) should +The overlay bar.dts, when loaded (and resolved as described in [1]) should ---- bar.dts ----------------------------------------------------------------- /plugin/; /* allow undefined label references and record them */ diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index 2b6b3d3f0388..33a8aaac02a8 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -387,7 +387,7 @@ static void __init harmony_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -"simple-bus" is defined in the ePAPR 1.0 specification as a property +"simple-bus" is defined in the Devicetree Specification as a property meaning a simple memory mapped bus, so the of_platform_populate() code could be written to just assume simple-bus compatible nodes will always be traversed. However, we pass it in as an argument so that |