diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-08 09:54:55 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-08 09:54:55 -0800 |
commit | f8d35403ebf5a6cce6a2347015f465a4da470f7b (patch) | |
tree | 6fd0b4dd87df0ef933febac578c25cac438be15d /Documentation/devicetree | |
parent | 9f24a81e2e5daf8820c8654afcd8512e797c41f2 (diff) | |
parent | e91b94fd2bc411b5926031496bbc3de9a96bb1c6 (diff) | |
download | linux-f8d35403ebf5a6cce6a2347015f465a4da470f7b.tar.bz2 |
Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is an unusual amount of new drivers this cycle, and this
explains the number of insertions.
Other than that, the changes are the usual fixes and feature addition.
Subsystem updates:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Driver updates:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support"
* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
rtc: pic32: convert to SPDX identifier
rtc: pic32: let the core handle range
rtc: pic32: convert to devm_rtc_allocate_device
rtc: update my email address
rtc: rv8803: convert to SPDX identifier
rtc: rv8803: let the core handle range
rtc: tx4939: convert to SPDX identifier
rtc: tx4939: use .set_time
rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: tx4939: set range
rtc: tx4939: remove useless test
rtc: zynqmp: let the core handle range
rtc: zynqmp: fix possible race condition
rtc: imx-sc: use rtc_time64_to_tm
rtc: rx8581: Add support for Epson rx8571 RTC
dt-bindings: rtc: add rx8571 compatible
rtc: pcf85063: remove dead code
rtc: remove rtc_class_ops.read_callback
rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
dt-bindings: rtc: add ABEOZ9
...
Diffstat (limited to 'Documentation/devicetree')
10 files changed, 152 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index 45ce054d844d..bfd33734faca 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -31,6 +31,7 @@ Electricity -microwatt-hours: micro Watt-hours -microvolt : micro volts -picofarads : picofarads +-femtofarads : femtofarads Temperature ---------------------------------------- diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt index 18b892d010d8..2405e35a1bc0 100644 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -16,6 +16,7 @@ Required properties: "abracon,ab1803" "abracon,ab1804" "abracon,ab1805" + "microcrystal,rv1805" Using "abracon,abx80x" will enable chip autodetection. - "reg": I2C bus address of the device diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt new file mode 100644 index 000000000000..14a04487b432 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt @@ -0,0 +1,25 @@ +Cadence Real Time Clock + +The Cadence RTC controller with date, time and alarm capabilities. +The alarm may wake the system from low-power state. + +Required properties: +- compatible: Should be "cdns,rtc-r109v3" +- reg: Specifies base physical address and size of the register area. +- interrupts: A single interrupt specifier. +- clocks: Must contain two entries: + - pclk: APB registers clock + - ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration + See ../clocks/clock-bindings.txt for details. + +Example: + rtc0: rtc@fd080000 { + compatible = "cdns,rtc-r109v3"; + reg = <0xfd080000 0x1000>; + + clock-names = "pclk", "ref_clk"; + clocks = <&sysclock>, <&refclock>; + + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt new file mode 100644 index 000000000000..51f003006f04 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt @@ -0,0 +1,38 @@ +Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the +ISL1208 and ISL1218 do not. They are all use the same driver with the bindings +described here, with chip specific properties as noted. + +Required properties supported by the device: + - "compatible": Should be one of the following: + - "isil,isl1208" + - "isil,isl1209" + - "isil,isl1218" + - "isil,isl1219" + - "reg": I2C bus address of the device + +Optional properties: + - "interrupt-names": list which may contains "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "interrupts": list of interrupts for "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "isil,ev-evienb": Enable or disable internal pull on EVIN pin + Applies to isl1209 and isl1219 only + Possible values are 0 and 1 + Value 0 enables internal pull-up on evin pin, 1 disables it. + Default will leave the non-volatile configuration of the pullup + as is. + +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin +connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. + + isl1219: rtc@68 { + compatible = "isil,isl1219"; + reg = <0x68>; + interrupt-names = "irq", "evdet"; + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; + isil,ev-evienb = <1>; + }; + diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt deleted file mode 100644 index c3efd48e91c2..000000000000 --- a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt +++ /dev/null @@ -1,29 +0,0 @@ -Intersil ISL1219 I2C RTC/Alarm chip with event in - -ISL1219 has additional pins EVIN and #EVDET for tamper detection. - -Required properties supported by the device: - - - "compatible": must be "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - - "interrupt-names": list which may contains "irq" and "evdet" - - "interrupts": list of interrupts for "irq" and "evdet" - - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified - value for proper operation. - - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 - and #EVDET pin connected to SoC gpio2 pin 24: - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt new file mode 100644 index 000000000000..d3e380ad712d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt @@ -0,0 +1,18 @@ +* NXP PCF85063 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf85063". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 7000fF. + +Example: + +pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; +}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt new file mode 100644 index 000000000000..0b1080c60f63 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt @@ -0,0 +1,18 @@ +* NXP PCF8523 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf8523". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 12500fF. + +Example: + +pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + quartz-load-femtofarads = <7000>; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson.txt b/Documentation/devicetree/bindings/rtc/rtc-meson.txt new file mode 100644 index 000000000000..e921fe66a362 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-meson.txt @@ -0,0 +1,35 @@ +* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC + +Required properties: +- compatible: should be one of the following describing the hardware: + * "amlogic,meson6-rtc" + * "amlogic,meson8-rtc" + * "amlogic,meson8b-rtc" + * "amlogic,meson8m2-rtc" + +- reg: physical register space for the controller's memory mapped registers. +- interrupts: the interrupt line of the RTC block. +- clocks: reference to the external 32.768kHz crystal oscillator. +- vdd-supply: reference to the power supply of the RTC block. +- resets: reset controller reference to allow reset of the controller + +Optional properties for the battery-backed non-volatile memory: +- #address-cells: should be 1 to address the battery-backed non-volatile memory +- #size-cells: should be 1 to reference the battery-backed non-volatile memory + +Optional child nodes: +- see ../nvmem/nvmem.txt + +Example: + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + clocks = <&rtc32k_xtal>; + vdd-supply = <&rtc_vdd>; + resets = <&reset RESET_RTC>; + + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt index 7c8da6926095..f4687c68c08c 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.txt +++ b/Documentation/devicetree/bindings/rtc/rtc.txt @@ -21,12 +21,16 @@ Optional properties The following properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given - if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode Should be - given if internal trickle charger diode should be - disabled -- wakeup-source : Enables wake up of host system on alarm +- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given + if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled +- wakeup-source : Enables wake up of host system on alarm +- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). + The default value shall be listed (if optional), + and likewise all valid values. Trivial RTCs ------------ @@ -39,21 +43,23 @@ possibly an interrupt line. Compatible Vendor / Chip ========== ============= abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface +abracon,abeoz9 AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +epson,rx8571 I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE emmicro,em3027 EM Microelectronic EM3027 Real-time Clock isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM isil,isl12022 Intersil ISL12022 Real-time Clock +microcrystal,rv3028 Real Time Clock Module with I2C-Bus microcrystal,rv3029 Real Time Clock Module with I2C-Bus +microcrystal,rv8523 Real Time Clock nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock -nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock pericom,pt7c4338 Real-time Clock Module ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC @@ -62,3 +68,4 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC sii,s35390a 2-wire CMOS real-time clock +whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 98f83edbfc95..aaa18bb1a9f4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -439,6 +439,7 @@ vot Vision Optical Technology Co., Ltd. wd Western Digital Corp. wetek WeTek Electronics, limited. wexler Wexler +whwave Shenzhen whwave Electronics, Inc. wi2wi Wi2Wi, Inc. winbond Winbond Electronics corp. winstar Winstar Display Corp. |