diff options
| author | Dan Murphy <dmurphy@ti.com> | 2019-08-23 12:50:56 -0500 |
|---|---|---|
| committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2019-09-03 10:23:57 +0200 |
| commit | e3b329221567ac86bd667bfb644ac04c867b71cb (patch) | |
| tree | 80e866f0ef7bfebafee0bfc64675537595e92969 /Documentation/devicetree | |
| parent | ec44dd579038efeeae25f10cba871c0e150d0110 (diff) | |
| download | linux-e3b329221567ac86bd667bfb644ac04c867b71cb.tar.bz2 | |
dt-bindings: can: tcan4x5x: Update binding to use interrupt property
Remove the data-ready-gpio property in favor of the DT standard
interrupt-parent and interrupts.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index c388f7d9feb1..27e1b4cebfbd 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,8 +10,10 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - data-ready-gpios: Interrupt GPIO for data and error reporting. - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + - interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. + - interrupts: interrupt specification for data-ready. See Documentation/devicetree/bindings/net/can/m_can.txt for additional required property details. @@ -30,7 +32,8 @@ tcan4x5x: tcan4x5x@0 { #size-cells = <1>; spi-max-frequency = <10000000>; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; - data-ready-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <14 GPIO_ACTIVE_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; |