summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-05 18:16:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-05 18:16:23 -0700
commitc6a677c6f37bb7abc85ba7e3465e82b9f7eb1d91 (patch)
tree9d0d4bb2e150837297cddc5be7f1b4950e9ab228 /Documentation/devicetree
parente87d51ac61f88ae44fe14b34abe08566032d726b (diff)
parent11270059e8d0b6f80801fac910c4ef751ca05c4c (diff)
downloadlinux-c6a677c6f37bb7abc85ba7e3465e82b9f7eb1d91.tar.bz2
Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH: "Here is the big staging tree update for 4.12-rc1. It's a big one, adding about 350k new lines of crap^Wcode, mostly all in a big dump of media drivers from Intel. But there's other new drivers in here as well, yet-another-wifi driver, new IIO drivers, and a new crypto accelerator. We also deleted a bunch of stuff, mostly in patch cleanups, but also the Android ION code has shrunk a lot, and the Android low memory killer driver was finally deleted, much to the celebration of the -mm developers. All of these have been in linux-next with a few build issues that will show up when you merge to your tree" Merge conflicts in the new rtl8723bs driver (due to the wifi changes this merge window) handled as per linux-next, courtesy of Stephen Rothwell. * tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits) staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd staging: ks7010: remove line continuations in quoted strings staging: vt6656: use tabs instead of spaces staging: android: ion: Fix unnecessary initialization of static variable staging: media: atomisp: fix range checking on clk_num staging: media: atomisp: fix misspelled word in comment staging: media: atomisp: kmap() can't fail staging: atomisp: remove #ifdef for runtime PM functions staging: atomisp: satm include directory is gone atomisp: remove some more unused files atomisp: remove hmm_load/store/clear indirections atomisp: kill off mmgr_free atomisp: clean up the hmm init/cleanup indirections atomisp: handle allocation calls before init in the hmm layer staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver staging: fsl-dpaa2/eth: Add TODO file staging: fsl-dpaa2/eth: Add trace points staging: fsl-dpaa2/eth: Add driver specific stats staging: fsl-dpaa2/eth: Add ethtool support staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adxl345.txt38
-rw-r--r--Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt20
-rw-r--r--Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt18
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ltc2497.txt13
-rw-r--r--Documentation/devicetree/bindings/iio/adc/max1118.txt21
-rw-r--r--Documentation/devicetree/bindings/iio/adc/max9611.txt27
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt76
-rw-r--r--Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ltc2632.txt23
-rw-r--r--Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt61
-rw-r--r--Documentation/devicetree/bindings/iio/health/max30102.txt30
-rw-r--r--Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt27
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/light/vl6180.txt15
-rw-r--r--Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt28
17 files changed, 370 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
new file mode 100644
index 000000000000..e7111b02c02c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
@@ -0,0 +1,38 @@
+Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
+
+http://www.analog.com/en/products/mems/accelerometers/adxl345.html
+
+Required properties:
+ - compatible : should be "adi,adxl345"
+ - reg : the I2C address or SPI chip select number of the sensor
+
+Required properties for SPI bus usage:
+ - spi-max-frequency : set maximum clock frequency, must be 5000000
+ - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
+
+Optional properties:
+ - interrupt-parent : phandle to the parent interrupt controller as documented
+ in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ - interrupts: interrupt mapping for IRQ as documented in
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example for a I2C device node:
+
+ accelerometer@2a {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+Example for a SPI device node:
+
+ accelerometer@0 {
+ compatible = "adi,adxl345";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index f9e3ff2c656e..047189192aec 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -7,6 +7,7 @@ Required properties:
- "amlogic,meson-gxm-saradc" for GXM
along with the generic "amlogic,meson-saradc"
- reg: the physical base address and length of the registers
+- interrupts: the interrupt indicating end of sampling
- clocks: phandle and clock identifier (see clock-names)
- clock-names: mandatory clocks:
- "clkin" for the reference clock (typically XTAL)
@@ -23,6 +24,7 @@ Example:
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
#io-channel-cells = <1>;
reg = <0x0 0x8680 0x0 0x34>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
new file mode 100644
index 000000000000..674e133b7cd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
@@ -0,0 +1,20 @@
+Aspeed ADC
+
+This device is a 10-bit converter for 16 voltage channels. All inputs are
+single ended.
+
+Required properties:
+- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
+- reg: memory window mapping address and length
+- clocks: Input clock used to derive the sample clock. Expected to be the
+ SoC's APB clock.
+- #io-channel-cells: Must be set to <1> to indicate channels are selected
+ by index.
+
+Example:
+ adc@1e6e9000 {
+ compatible = "aspeed,ast2400-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
new file mode 100644
index 000000000000..487ea966858e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
@@ -0,0 +1,18 @@
+Motorola CPCAP PMIC ADC binding
+
+Required properties:
+- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
+- interrupt-parent: The interrupt controller
+- interrupts: The interrupt number for the ADC device
+- interrupt-names: Should be "adcdone"
+- #io-channel-cells: Number of cells in an IIO specifier
+
+Example:
+
+cpcap_adc: adc {
+ compatible = "motorola,mapphone-cpcap-adc";
+ interrupt-parent = <&cpcap>;
+ interrupts = <8 IRQ_TYPE_NONE>;
+ interrupt-names = "adcdone";
+ #io-channel-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
new file mode 100644
index 000000000000..a237ed99c0d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
@@ -0,0 +1,13 @@
+* Linear Technology / Analog Devices LTC2497 ADC
+
+Required properties:
+ - compatible: Must be "lltc,ltc2497"
+ - reg: Must contain the ADC I2C address
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+ ltc2497: adc@76 {
+ compatible = "lltc,ltc2497";
+ reg = <0x76>;
+ vref-supply = <&ltc2497_reg>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/max1118.txt b/Documentation/devicetree/bindings/iio/adc/max1118.txt
new file mode 100644
index 000000000000..cf33d0b15a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max1118.txt
@@ -0,0 +1,21 @@
+* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
+
+Required properties:
+ - compatible: Should be one of
+ * "maxim,max1117"
+ * "maxim,max1118"
+ * "maxim,max1119"
+ - reg: spi chip select number for the device
+ - (max1118 only) vref-supply: The regulator supply for ADC reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+ compatible = "maxim,max1118";
+ reg = <0>;
+ vref-supply = <&vdd_supply>;
+ spi-max-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/max9611.txt b/Documentation/devicetree/bindings/iio/adc/max9611.txt
new file mode 100644
index 000000000000..ab4f43145ae5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max9611.txt
@@ -0,0 +1,27 @@
+* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
+
+Maxim max9611/max9612 is an high-side current sense amplifier with integrated
+12-bits ADC communicating over I2c bus.
+The device node for this driver shall be a child of a I2c controller.
+
+Required properties
+ - compatible: Should be "maxim,max9611" or "maxim,max9612"
+ - reg: The 7-bits long I2c address of the device
+ - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
+ resistor
+
+Example:
+
+&i2c4 {
+ csa: adc@7c {
+ compatible = "maxim,max9611";
+ reg = <0x7c>;
+
+ shunt-resistor-micro-ohms = <5000>;
+ };
+};
+
+This device node describes a current sense amplifier sitting on I2c4 bus
+with address 0x7c (read address is 0xf9, write address is 0xf8).
+A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
+inputs.
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
index 53cd146d8096..3ae06127789e 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
@@ -19,32 +19,42 @@ Required properties:
with PMIC variant but is typically something like 2.2 or 1.8V.
The following required properties are standard for IO channels, see
-iio-bindings.txt for more details:
+iio-bindings.txt for more details, but notice that this particular
+ADC has a special addressing scheme that require two cells for
+identifying each ADC channel:
-- #address-cells: should be set to <1>
+- #address-cells: should be set to <2>, the first cell is the
+ prescaler (on PM8058) or premux (on PM8921) with two valid bits
+ so legal values are 0x00, 0x01 or 0x02. The second cell
+ is the main analog mux setting (0x00..0x0f). The combination
+ of prescaler/premux and analog mux uniquely addresses a hardware
+ channel on all systems.
- #size-cells: should be set to <0>
-- #io-channel-cells: should be set to <1>
+- #io-channel-cells: should be set to <2>, again the cells are
+ precaler or premux followed by the analog muxing line.
- interrupts: should refer to the parent PMIC interrupt controller
and reference the proper ADC interrupt.
Required subnodes:
-The ADC channels are configured as subnodes of the ADC. Since some of
-them are used for calibrating the ADC, these nodes are compulsory:
+The ADC channels are configured as subnodes of the ADC.
+
+Since some of them are used for calibrating the ADC, these nodes are
+compulsory:
adc-channel@c {
- reg = <0x0c>;
+ reg = <0x00 0x0c>;
};
adc-channel@d {
- reg = <0x0d>;
+ reg = <0x00 0x0d>;
};
adc-channel@f {
- reg = <0x0f>;
+ reg = <0x00 0x0f>;
};
These three nodes are used for absolute and ratiometric calibration
@@ -52,13 +62,13 @@ and only need to have these reg values: they are by hardware definition
1:1 ratio converters that sample 625, 1250 and 0 milliV and create
an interpolation calibration for all other ADCs.
-Optional subnodes: any channels other than channel 0x0c, 0x0d and
-0x0f are optional.
+Optional subnodes: any channels other than channels [0x00 0x0c],
+[0x00 0x0d] and [0x00 0x0f] are optional.
Required channel node properties:
- reg: should contain the hardware channel number in the range
- 0 .. 0x0f (4 bits). The hardware only supports 16 channels.
+ 0 .. 0xff (8 bits).
Optional channel node properties:
@@ -94,56 +104,54 @@ Example:
xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
- interrupt-parent = <&pm8058>;
- interrupts = <76 1>;
- #address-cells = <1>;
+ interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
#size-cells = <0>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <2>;
vcoin: adc-channel@0 {
- reg = <0x00>;
+ reg = <0x00 0x00>;
};
vbat: adc-channel@1 {
- reg = <0x01>;
+ reg = <0x00 0x01>;
};
dcin: adc-channel@2 {
- reg = <0x02>;
+ reg = <0x00 0x02>;
};
ichg: adc-channel@3 {
- reg = <0x03>;
+ reg = <0x00 0x03>;
};
vph_pwr: adc-channel@4 {
- reg = <0x04>;
+ reg = <0x00 0x04>;
};
usb_vbus: adc-channel@a {
- reg = <0x0a>;
+ reg = <0x00 0x0a>;
};
die_temp: adc-channel@b {
- reg = <0x0b>;
+ reg = <0x00 0x0b>;
};
ref_625mv: adc-channel@c {
- reg = <0x0c>;
+ reg = <0x00 0x0c>;
};
ref_1250mv: adc-channel@d {
- reg = <0x0d>;
+ reg = <0x00 0x0d>;
};
ref_325mv: adc-channel@e {
- reg = <0x0e>;
+ reg = <0x00 0x0e>;
};
ref_muxoff: adc-channel@f {
- reg = <0x0f>;
+ reg = <0x00 0x0f>;
};
};
-
/* IIO client node */
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&xoadc 0x01>, /* Battery */
- <&xoadc 0x02>, /* DC in (charger) */
- <&xoadc 0x04>, /* VPH the main system voltage */
- <&xoadc 0x0b>, /* Die temperature */
- <&xoadc 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x0e>; /* Reference voltage 0.325V */
+ io-channels = <&xoadc 0x00 0x01>, /* Battery */
+ <&xoadc 0x00 0x02>, /* DC in (charger) */
+ <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&xoadc 0x00 0x0b>, /* Die temperature */
+ <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
};
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
index 205593f56fe7..e0a9b9d6d6fd 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
- "rockchip,saradc": for rk3188, rk3288
- "rockchip,rk3066-tsadc": for rk3036
+ - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
- "rockchip,rk3399-saradc": for rk3399
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 5dfc88ec24a4..e35f9f1b3200 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -57,6 +57,9 @@ Optional properties:
- dmas: Phandle to dma channel for this ADC instance.
See ../../dma/dma.txt for details.
- dma-names: Must be "rx" when dmas property is being used.
+- assigned-resolution-bits: Resolution (bits) to use for conversions. Must
+ match device available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4).
+ Default is maximum resolution if unset.
Example:
adc: adc@40012000 {
@@ -84,6 +87,7 @@ Example:
st,adc-channels = <8>;
dmas = <&dma2 0 0 0x400 0x0>;
dma-names = "rx";
+ assigned-resolution-bits = <8>;
};
...
other adc child nodes follow...
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
new file mode 100644
index 000000000000..eb911e5a8ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
@@ -0,0 +1,23 @@
+Linear Technology LTC2632 DAC device driver
+
+Required properties:
+ - compatible: Has to contain one of the following:
+ lltc,ltc2632-l12
+ lltc,ltc2632-l10
+ lltc,ltc2632-l8
+ lltc,ltc2632-h12
+ lltc,ltc2632-h10
+ lltc,ltc2632-h8
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Example:
+
+ spi_master {
+ dac: ltc2632@0 {
+ compatible = "lltc,ltc2632-l12";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
new file mode 100644
index 000000000000..bcee71f808d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
@@ -0,0 +1,61 @@
+STMicroelectronics STM32 DAC
+
+The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+may be configured in 8 or 12-bit mode. It has two output channels, each with
+its own converter.
+It has built-in noise and triangle waveform generator and supports external
+triggers for conversions. The DAC's output buffer allows a high drive output
+current.
+
+Contents of a stm32 dac root node:
+-----------------------------------
+Required properties:
+- compatible: Must be "st,stm32h7-dac-core".
+- reg: Offset and length of the device's register set.
+- clocks: Must contain an entry for pclk (which feeds the peripheral bus
+ interface)
+- clock-names: Must be "pclk".
+- vref-supply: Phandle to the vref+ input analog reference supply.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- resets: Must contain the phandle to the reset controller.
+- A pinctrl state named "default" for each DAC channel may be defined to set
+ DAC_OUTx pin in mode of operation for analog output on external pin.
+
+Contents of a stm32 dac child node:
+-----------------------------------
+DAC core node should contain at least one subnode, representing a
+DAC instance/channel available on the machine.
+
+Required properties:
+- compatible: Must be "st,stm32-dac".
+- reg: Must be either 1 or 2, to define (single) channel in use
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
+ Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+ dac: dac@40007400 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40007400 0x400>;
+ clocks = <&clk>;
+ clock-names = "pclk";
+ vref-supply = <&reg_vref>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dac_out1 &dac_out2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
new file mode 100644
index 000000000000..c695e7cbeefb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -0,0 +1,30 @@
+Maxim MAX30102 heart rate and pulse oximeter sensor
+
+* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
+
+Required properties:
+ - compatible: must be "maxim,max30102"
+ - reg: the I2C address of the sensor
+ - interrupt-parent: should be the phandle for the interrupt controller
+ - interrupts: the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic
+ interrupt client node bindings.
+
+Optional properties:
+ - maxim,red-led-current-microamp: configuration for RED LED current
+ - maxim,ir-led-current-microamp: configuration for IR LED current
+
+ Note that each step is approximately 200 microamps, ranging from 0 uA to
+ 50800 uA.
+
+Example:
+
+max30100@57 {
+ compatible = "maxim,max30102";
+ reg = <0x57>;
+ maxim,red-led-current-microamp = <7000>;
+ maxim,ir-led-current-microamp = <7000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index a9fc11e43b45..2b4514592f83 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -3,14 +3,21 @@ InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
http://www.invensense.com/mems/gyro/mpu6050.html
Required properties:
- - compatible : should be "invensense,mpu6050"
+ - compatible : should be one of
+ "invensense,mpu6050"
+ "invensense,mpu6500"
+ "invensense,mpu9150"
+ "invensense,mpu9250"
+ "invensense,icm20608"
- reg : the I2C address of the sensor
- interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for GPIO IRQ
Optional properties:
- mount-matrix: an optional 3x3 mounting rotation matrix
-
+ - i2c-gate node. These devices also support an auxiliary i2c bus. This is
+ simple enough to be described using the i2c-gate binding. See
+ i2c/i2c-gate.txt for more details.
Example:
mpu6050@68 {
@@ -28,3 +35,19 @@ Example:
"0", /* y2 */
"0.984807753012208"; /* z2 */
};
+
+
+ mpu9250@68 {
+ compatible = "invensense,mpu9250";
+ reg = <0x68>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 1>;
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ax8975@c {
+ compatible = "ak,ak8975";
+ reg = <0x0c>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index cf81afdf7803..8305fb05ffda 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -3,6 +3,8 @@
Required properties:
- compatible: must be one of:
"st,lsm6ds3"
+ "st,lsm6ds3h"
+ "st,lsm6dsl"
"st,lsm6dsm"
- reg: i2c address of the sensor / spi cs line
diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
new file mode 100644
index 000000000000..2c52952715a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
@@ -0,0 +1,15 @@
+STMicro VL6180 - ALS, range and proximity sensor
+
+Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+
+Required properties:
+
+ -compatible: should be "st,vl6180"
+ -reg: the I2C address of the sensor
+
+Example:
+
+vl6180@29 {
+ compatible = "st,vl6180";
+ reg = <0x29>;
+};
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
new file mode 100644
index 000000000000..d4dc7a227e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
@@ -0,0 +1,28 @@
+* Devantech SRF04 ultrasonic range finder
+ Bit-banging driver using two GPIOs
+
+Required properties:
+ - compatible: Should be "devantech,srf04"
+
+ - trig-gpios: Definition of the GPIO for the triggering (output)
+ This GPIO is set for about 10 us by the driver to tell the
+ device it should initiate the measurement cycle.
+
+ - echo-gpios: Definition of the GPIO for the echo (input)
+ This GPIO is set by the device as soon as an ultrasonic
+ burst is sent out and reset when the first echo is
+ received.
+ Thus this GPIO is set while the ultrasonic waves are doing
+ one round trip.
+ It needs to be an GPIO which is able to deliver an
+ interrupt because the time between two interrupts is
+ measured in the driver.
+ See Documentation/devicetree/bindings/gpio/gpio.txt for
+ information on how to specify a consumer gpio.
+
+Example:
+srf04@0 {
+ compatible = "devantech,srf04";
+ trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+};