Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

5 files changed, 123 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
index f1533d91953a..f7a0da6b4022 100644
--- a/Documentation/devicetree/bindings/marvell.txt
+++ b/Documentation/devicetree/bindings/marvell.txt
@@ -115,6 +115,9 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
      - compatible : "marvell,mv64360-eth-block"
      - reg : Offset and length of the register set for this block
 
+   Optional properties:
+     - clocks : Phandle to the clock control device and gate bit
+
    Example Discovery Ethernet block node:
      ethernet-block@2000 {
 	     #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
new file mode 100644
index 000000000000..72cf0c5daff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -0,0 +1,14 @@
+* AT91 CAN *
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	can0: can@f000c000 {
+		compatbile = "atmel,at91sam9x5-can";
+		reg = <0xf000c000 0x300>;
+		interrupts = <40 4 5>
+	};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index ecfdf756d10f..4f2ca6b4a182 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -15,16 +15,22 @@ Required properties:
 - mac_control		: Specifies Default MAC control register content
 			  for the specific platform
 - slaves		: Specifies number for slaves
-- cpts_active_slave	: Specifies the slave to use for time stamping
+- active_slave		: Specifies the slave to use for time stamping,
+			  ethtool and SIOCGMIIPHY
 - cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
-- phy_id		: Specifies slave phy id
-- mac-address		: Specifies slave MAC address
 
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
 - no_bd_ram		: Must be 0 or 1
 - dual_emac		: Specifies Switch to act as Dual EMAC
+
+Slave Properties:
+Required properties:
+- phy_id		: Specifies slave phy id
+- mac-address		: Specifies slave MAC address
+
+Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
@@ -47,7 +53,7 @@ Examples:
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
-		cpts_active_slave = <0>;
+		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
@@ -73,7 +79,7 @@ Examples:
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
-		cpts_active_slave = <0>;
+		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
new file mode 100644
index 000000000000..49f4f7ae3f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -0,0 +1,91 @@
+Marvell Distributed Switch Architecture Device Tree Bindings
+------------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "marvell,dsa"
+- #address-cells	: Must be 2, first cell is the address on the MDIO bus
+			  and second cell is the address in the switch tree.
+			  Second cell is used only when cascading/chaining.
+- #size-cells		: Must be 0
+- dsa,ethernet		: Should be a phandle to a valid Ethernet device node
+- dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node
+
+Optionnal properties:
+- interrupts		: property with a value describing the switch
+			  interrupt number (not supported by the driver)
+
+A DSA node can contain multiple switch chips which are therefore child nodes of
+the parent DSA node. The maximum number of allowed child nodes is 4
+(DSA_MAX_SWITCHES).
+Each of these switch child nodes should have the following required properties:
+
+- reg			: Describes the switch address on the MII bus
+- #address-cells	: Must be 1
+- #size-cells		: Must be 0
+
+A switch may have multiple "port" children nodes
+
+Each port children node must have the following mandatory properties:
+- reg			: Describes the port address in the switch
+- label			: Describes the label associated with this port, special
+			  labels are "cpu" to indicate a CPU port and "dsa" to
+			  indicate an uplink/downlink port.
+
+Note that a port labelled "dsa" will imply checking for the uplink phandle
+described below.
+
+Optionnal property:
+- link			: Should be a phandle to another switch's DSA port.
+			  This property is only used when switches are being
+			  chained/cascaded together.
+
+Example:
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interrupts = <10>;
+		dsa,ethernet = <&ethernet0>;
+		dsa,mii-bus = <&mii_bus0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+
+			switch0uplink: port@6 {
+				reg = <6>;
+				label = "dsa";
+				link = <&switch1uplink>;
+			};
+		};
+
+		switch@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <17 1>;	/* MDIO address 17, switch 1 in tree */
+
+			switch1uplink: port@0 {
+				reg = <0>;
+				label = "dsa";
+				link = <&switch0uplink>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
index 34e7aafa321c..9417e54c26c0 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -9,6 +9,10 @@ Required properties:
 - compatible: "marvell,orion-mdio"
 - reg: address and length of the SMI register
 
+Optional properties:
+- interrupts: interrupt line number for the SMI error/done interrupt
+- clocks: Phandle to the clock control device and gate bit
+
 The child nodes of the MDIO driver are the individual PHY devices
 connected to this MDIO bus. They must have a "reg" property given the
 PHY address on the MDIO bus.