Merge branch 'spi-5.7' into spi-next

13 files changed, 410 insertions, 77 deletions

diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
new file mode 100644
index 000000000000..893d81e54caa
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI controllers
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
+  node will always be a child of an FSI CFAM node; see fsi.txt for details on
+  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
+  SPI controllers.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2spi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    fsi2spi@1c00 {
+        compatible = "ibm,fsi2spi";
+        reg = <0x1c00 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 3c91ad430eea..b823b8625243 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8901-regulators"
 		    "qcom,rpm-pm8921-regulators"
 		    "qcom,rpm-pm8018-regulators"
+		    "qcom,rpm-smb208-regulators"
 
 - vdd_l0_l1_lvs-supply:
 - vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
 	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
 	l12, l14, lvs1
 
+smb208:
+	s1a, s1b, s2a, s2b
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
 
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
new file mode 100644
index 000000000000..f0acce2029fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MP5416 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9a-f]{1,2}$"
+  compatible:
+    enum:
+      - mps,mp5416
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4] and LDO[1-4]
+
+    patternProperties:
+      "^buck[1-4]$":
+        allOf:
+          - $ref: "regulator.yaml#"
+        type: object
+
+      "^ldo[1-4]$":
+        allOf:
+          - $ref: "regulator.yaml#"
+        type: object
+
+    additionalProperties: false
+  additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mp5416";
+          reg = <0x69>;
+
+          regulators {
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <600000>;
+             regulator-max-microvolt = <2187500>;
+             regulator-min-microamp  = <3800000>;
+             regulator-max-microamp  = <6800000>;
+             regulator-boot-on;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <800000>;
+             regulator-max-microvolt = <3975000>;
+            };
+         };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 49b617c98ae7..9147df29022a 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -22,6 +22,7 @@ properties:
     enum:
       - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs
       - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs
+      - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs
 
   interrupts:
     maxItems: 1
@@ -40,6 +41,27 @@ properties:
     items:
       - const: core
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - amlogic,meson-g12a-spicc
+
+then:
+  properties:
+    clocks:
+      contains:
+        items:
+          - description: controller register bus clock
+          - description: baud rate generator and delay control clock
+
+    clock-names:
+      minItems: 2
+      items:
+        - const: core
+        - const: pclk
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d3264140cc5..33bc58f4cf4b 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,7 +10,10 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
-  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
+  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ
+  - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM
+  - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN
+  - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - clocks : Clock specifiers for both ipg and per clocks.
diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
new file mode 100644
index 000000000000..2aa766759d59
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qca,ar934x-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/ath79-clk.h>
+    spi: spi@1f000000 {
+        compatible = "qca,ar934x-spi";
+        reg = <0x1f000000 0x1c>;
+        clocks = <&pll ATH79_CLK_AHB>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 1e0ca6ccf64b..d8e5509a7081 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -52,6 +52,12 @@ properties:
     description:
       The SPI controller acts as a slave, instead of a master.
 
+oneOf:
+  - required:
+      - "#address-cells"
+  - required:
+      - spi-slave
+
 patternProperties:
   "^slave$":
     type: object
@@ -114,7 +120,7 @@ patternProperties:
           - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
-          Bus width to the SPI bus used for MISO.
+          Bus width to the SPI bus used for read transfers.
 
       spi-rx-delay-us:
         description:
@@ -126,7 +132,7 @@ patternProperties:
           - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
-          Bus width to the SPI bus used for MOSI.
+          Bus width to the SPI bus used for write transfers.
 
       spi-tx-delay-us:
         description:
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index 162e024b95a0..30a79da9c039 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,12 +1,17 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
-		"fsl,ls2085a-dspi"
-		or
-		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
-		"fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
-		"fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
+- compatible : must be one of:
+	"fsl,vf610-dspi",
+	"fsl,ls1021a-v1.0-dspi",
+	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1028a-dspi",
+	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
+	"fsl,ls2085a-dspi",
+	"fsl,lx2160a-dspi",
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
@@ -14,11 +19,11 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must contain a "default" entry.
 - spi-num-chipselects : the number of the chipselect signals.
-- bus-num : the slave chip chipselect signal number.
 
 Optional property:
 - big-endian: If present the dspi device's registers are implemented
   in big endian mode.
+- bus-num : the slave chip chipselect signal number.
 
 Optional SPI slave node properties:
 - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt
index a12e3b5c495d..984ae7fd4f94 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt
@@ -1,4 +1,4 @@
-* Serial NOR flash controller for MediaTek SoCs
+* Serial NOR flash controller for MediaTek ARM SoCs
 
 Required properties:
 - compatible: 	  For mt8173, compatible should be "mediatek,mt8173-nor",
@@ -13,6 +13,7 @@ Required properties:
 		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt8173-nor"
 - reg: 		  physical base address and length of the controller's register
+- interrupts:	  Interrupt number used by the controller.
 - clocks: 	  the phandle of the clocks needed by the nor controller
 - clock-names: 	  the names of the clocks
 		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
@@ -22,20 +23,16 @@ Required properties:
 - #address-cells: should be <1>
 - #size-cells:	  should be <0>
 
-The SPI flash must be a child of the nor_flash node and must have a
-compatible property. Also see jedec,spi-nor.txt.
-
-Required properties:
-- compatible:	  May include a device-specific string consisting of the manufacturer
-		  and name of the chip. Must also include "jedec,spi-nor" for any
-		  SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
-- reg :		  Chip-Select number
+There should be only one spi slave device following generic spi bindings.
+It's not recommended to use this controller for devices other than SPI NOR
+flash due to limited transfer capability of this controller.
 
 Example:
 
 nor_flash: spi@1100d000 {
 	compatible = "mediatek,mt8173-nor";
 	reg = <0 0x1100d000 0 0xe0>;
+	interrupts = <&spi_flash_irq>;
 	clocks = <&pericfg CLK_PERI_SPI>,
 		 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
 	clock-names = "spi", "sf";
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
new file mode 100644
index 000000000000..0ae692dc28b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SPI Multiplexer
+
+description: |
+  This binding describes a SPI bus multiplexer to route the SPI chip select
+  signals. This can be used when you need more devices than the SPI controller
+  has chip selects available. An example setup is shown in ASCII art; the actual
+  setting of the multiplexer to a channel needs to be done by a specific SPI mux
+  driver.
+
+        MOSI /--------------------------------+--------+--------+--------\
+        MISO |/------------------------------+|-------+|-------+|-------\|
+         SCL ||/----------------------------+||------+||------+||------\||
+             |||                            |||      |||      |||      |||
+      +------------+                        |||      |||      |||      |||
+      | SoC  |||   |                      +-+++-+  +-+++-+  +-+++-+  +-+++-+
+      |      |||   |                      | dev |  | dev |  | dev |  | dev |
+      |   +--+++-+ | CS-X  +------+\      +--+--+  +--+--+  +--+--+  +--+--+
+      |   | SPI  +-|-------+ Mux  |\\   CS-0 |        |        |        |
+      |   +------+ |       +--+---+\\\-------/   CS-1 |        |        |
+      |            |          |    \\\----------------/   CS-2 |        |
+      |   +------+ |          |     \\-------------------------/   CS-3 |
+      |   | ?    +-|----------/      \----------------------------------/
+      |   +------+ |
+      +------------+
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: spi-mux
+
+  mux-controls:
+    maxItems: 1
+
+required:
+   - compatible
+   - reg
+   - spi-max-frequency
+   - mux-controls
+
+examples:
+   - |
+     #include <dt-bindings/gpio/gpio.h>
+     mux: mux-controller {
+       compatible = "gpio-mux";
+       #mux-control-cells = <0>;
+
+       mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+     };
+
+     spi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       spi@0 {
+         compatible = "spi-mux";
+         reg = <0>;
+         #address-cells = <1>;
+         #size-cells = <0>;
+         spi-max-frequency = <100000000>;
+
+         mux-controls = <&mux>;
+
+         spi-flash@0 {
+           compatible = "jedec,spi-nor";
+           reg = <0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+           spi-max-frequency = <40000000>;
+         };
+
+         spi-device@1 {
+           compatible = "lineartechnology,ltc2488";
+           reg = <1>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+           spi-max-frequency = <10000000>;
+         };
+       };
+     };
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
index 2cd67eb727d4..7ac60d9fe357 100644
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
@@ -2,6 +2,9 @@
 
 Required properties:
   - compatible : Should be "nxp,lx2160a-fspi"
+			    "nxp,imx8qxp-fspi"
+			    "nxp,imx8mm-fspi"
+
   - reg :        First contains the register location and length,
                  Second contains the memory mapping address and length
   - reg-names :  Should contain the resource reg names:
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
deleted file mode 100644
index a0edac12d8df..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip SPI Controller
-
-The Rockchip SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required Properties:
-
-- compatible: should be one of the following.
-    "rockchip,rv1108-spi" for rv1108 SoCs.
-    "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
-    "rockchip,rk3036-spi" for rk3036 SoCS.
-    "rockchip,rk3066-spi" for rk3066 SoCs.
-    "rockchip,rk3188-spi" for rk3188 SoCs.
-    "rockchip,rk3228-spi" for rk3228 SoCS.
-    "rockchip,rk3288-spi" for rk3288 SoCs.
-    "rockchip,rk3368-spi" for rk3368 SoCs.
-    "rockchip,rk3399-spi" for rk3399 SoCs.
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
-			   the peripheral clock.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Properties:
-
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
-		Rx data (may need to be fine tuned for high capacitance lines).
-		No delay (0) by default.
-- pinctrl-names: Names for the pin configuration(s); may be "default" or
-		"sleep", where the "sleep" configuration may describe the state
-		the pins should be in during system suspend. See also
-		pinctrl/pinctrl-bindings.txt.
-
-
-Example:
-
-	spi0: spi@ff110000 {
-		compatible = "rockchip,rk3066-spi";
-		reg = <0xff110000 0x1000>;
-		dmas = <&pdma1 11>, <&pdma1 12>;
-		dma-names = "tx", "rx";
-		rx-sample-delay-ns = <10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
-		clock-names = "spiclk", "apb_pclk";
-		pinctrl-0 = <&spi1_pins>;
-		pinctrl-1 = <&spi1_sleep>;
-		pinctrl-names = "default", "sleep";
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
new file mode 100644
index 000000000000..81ad4b761502
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+  The Rockchip SPI controller is used to interface with various devices such
+  as flash and display controllers using the SPI communication interface.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3036-spi
+      - const: rockchip,rk3066-spi
+      - const: rockchip,rk3228-spi
+      - const: rockchip,rv1108-spi
+      - items:
+          - enum:
+            - rockchip,px30-spi
+            - rockchip,rk3188-spi
+            - rockchip,rk3288-spi
+            - rockchip,rk3308-spi
+            - rockchip,rk3328-spi
+            - rockchip,rk3368-spi
+            - rockchip,rk3399-spi
+          - const: rockchip,rk3066-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: transfer-clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: spiclk
+      - const: apb_pclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    default: 0
+    description:
+      Nano seconds to delay after the SCLK edge before sampling Rx data
+      (may need to be fine tuned for high capacitance lines).
+      If not specified 0 will be used.
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+    description:
+      Names for the pin configuration(s); may be "default" or "sleep",
+      where the "sleep" configuration may describe the state
+      the pins should be in during system suspend.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0: spi@ff110000 {
+      compatible = "rockchip,rk3066-spi";
+      reg = <0xff110000 0x1000>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+      clock-names = "spiclk", "apb_pclk";
+      dmas = <&pdma1 11>, <&pdma1 12>;
+      dma-names = "tx", "rx";
+      pinctrl-0 = <&spi1_pins>;
+      pinctrl-1 = <&spi1_sleep>;
+      pinctrl-names = "default", "sleep";
+      rx-sample-delay-ns = <10>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };