Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC updates from Stafford Horne:
 "The OpenRISC work is a bit more interesting this time, adding SMP
  support and a few general cleanups.

  Small Things:

   - Move OpenRISC docs into Documentation and clean them up

   - Document previously undocumented devicetree bindings

   - Update the or1ksim dts to use stdout-path

  OpenRISC SMP support details:

   - First the "use shadow registers" and "define CPU_BIG_ENDIAN as
     true" get the architecture ready for SMP.

   - The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
     qrwlocks" add the SMP locking infrastructure as needed. Using the
     qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
     original spinlocks implementation.

   - The "support for ompic" adds a new irqchip device which is used for
     IPI communication to support SMP.

   - The "initial SMP support" adds smp.c and makes changes to all of
     the necessary data-structures to be per-cpu.

  The remaining patches are bug fixes and debug helpers which I wanted
  to keep separate from the "initial SMP support" in order to allow them
  to be reviewed on their own. This includes:

   - add cacheflush support to fix icache aliasing

   - fix initial preempt state for secondary cpu tasks

   - sleep instead of spin on secondary wait

   - support framepointers and STACKTRACE_SUPPORT

   - enable LOCKDEP_SUPPORT and irqflags tracing

   - timer sync: Add tick timer sync logic

   - fix possible deadlock in timer sync, pointed out by mips guys

  Note: the irqchip patch was reviewed with Marc and we agreed to push
  it together with these patches"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: fix possible deadlock scenario during timer sync
  openrisc: pass endianness info to sparse
  openrisc: add tick timer multi-core sync logic
  openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
  openrisc: support framepointers and STACKTRACE_SUPPORT
  openrisc: add simple_smp dts and defconfig for simulators
  openrisc: add cacheflush support to fix icache aliasing
  openrisc: sleep instead of spin on secondary wait
  openrisc: fix initial preempt state for secondary cpu tasks
  openrisc: initial SMP support
  irqchip: add initial support for ompic
  dt-bindings: add openrisc to vendor prefixes list
  openrisc: use qspinlocks and qrwlocks
  openrisc: add 1 and 2 byte cmpxchg support
  openrisc: use shadow registers to save regs on exception
  dt-bindings: openrisc: Add OpenRISC platform SoC
  Documentation: openrisc: Updates to README
  Documentation: Move OpenRISC docs out of arch/
  MAINTAINERS: Add OpenRISC pic maintainer
  openrisc: dts: or1ksim: Add stdout-path

3 files changed, 62 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
new file mode 100644
index 000000000000..caec07cc7149
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
@@ -0,0 +1,22 @@
+Open Multi-Processor Interrupt Controller
+
+Required properties:
+
+- compatible : This should be "openrisc,ompic"
+- reg : Specifies base physical address and size of the register space. The
+  size is based on the number of cores the controller has been configured
+  to handle, this should be set to 8 bytes per cpu core.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : This should be set to 0 as this will not be an irq
+  parent.
+- interrupts : Specifies the interrupt line to which the ompic is wired.
+
+Example:
+
+ompic: interrupt-controller@98000000 {
+	compatible = "openrisc,ompic";
+	reg = <0x98000000 16>;
+	interrupt-controller;
+	#interrupt-cells = <0>;
+	interrupts = <1>;
+};
diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
new file mode 100644
index 000000000000..4950c794ecbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
@@ -0,0 +1,39 @@
+OpenRISC Generic SoC
+====================
+
+Boards and FPGA SoC's which support the OpenRISC standard platform.  The
+platform essentially follows the conventions of the OpenRISC architecture
+specification, however some aspects, such as the boot protocol have been defined
+by the Linux port.
+
+Required properties
+-------------------
+ - compatible: Must include "opencores,or1ksim"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+properties:
+ - compatible: Must be "opencores,or1200-rtlsvn481".
+ - reg: CPU number.
+ - clock-frequency: The CPU clock frequency in Hz.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+
+Boot protocol
+-------------
+The bootloader may pass the following arguments to the kernel:
+ - r3:  address of a flattened device-tree blob or 0x0.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1afd298eddd7..b1eeca851d6f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -246,6 +246,7 @@ onion	Onion Corporation
 onnn	ON Semiconductor Corp.
 ontat	On Tat Industrial Company
 opencores	OpenCores.org
+openrisc	OpenRISC.io
 option	Option NV
 ORCL	Oracle Corporation
 ortustech	Ortus Technology Co., Ltd.