diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-23 19:16:01 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-23 19:16:01 -0700 |
commit | 299d14d4c31aff3b37a03894e012edf8421676ee (patch) | |
tree | cb1ca4a273ff202818461f339bf947acb11924a3 /Documentation/devicetree/bindings/pci | |
parent | e94f8ccde4710f9a3e51dd3bc6134c96e33f29b3 (diff) | |
parent | c5048a73b4770304699cb15e3ffcb97acab685f7 (diff) | |
download | linux-299d14d4c31aff3b37a03894e012edf8421676ee.tar.bz2 |
Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
(Krzysztof Wilczynski)
- Fix incorrect PCIe device types and remove dev->has_secondary_link
to simplify code that deals with upstream/downstream ports (Mika
Westerberg)
- After suspend, restore Resizable BAR size bits correctly for 1MB
BARs (Sumit Saxena)
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)
Virtualization:
- Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
Labs (Ali Saidi)
- Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)
- Remove group write permissions from sysfs sriov_numvfs,
sriov_drivers_autoprobe (Kelsey Skunberg)
Hotplug:
- Simplify pciehp indicator control (Denis Efremov)
Peer-to-peer DMA:
- Allow P2P DMA between root ports for whitelisted bridges (Logan
Gunthorpe)
- Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)
- DMA map P2P DMA requests that traverse host bridge (Logan
Gunthorpe)
Amazon Annapurna Labs host bridge driver:
- Add DT binding and controller driver (Jonathan Chocron)
Hyper-V host bridge driver:
- Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)
- Fix PCI domain number collisions (Haiyang Zhang)
- Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)
- Fix build errors on non-SYSFS config (Randy Dunlap)
i.MX6 host bridge driver:
- Limit DBI register length (Stefan Agner)
Intel VMD host bridge driver:
- Fix config addressing issues (Jon Derrick)
Layerscape host bridge driver:
- Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)
- Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
(Xiaowei Bao)
Mediatek host bridge driver:
- Add MT7629 controller support (Jianjun Wang)
Mobiveil host bridge driver:
- Fix CPU base address setup (Hou Zhiqiang)
- Make "num-lanes" property optional (Hou Zhiqiang)
Tegra host bridge driver:
- Fix OF node reference leak (Nishka Dasgupta)
- Disable MSI for root ports to work around design problem (Vidya
Sagar)
- Add Tegra194 DT binding and controller support (Vidya Sagar)
- Add support for sideband pins and slot regulators (Vidya Sagar)
- Add PIPE2UPHY support (Vidya Sagar)
Misc:
- Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)
- Unexport pci_bus_get(), etc (Kelsey Skunberg)
- Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
the PCI core (Kelsey Skunberg)
- Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)
- Mark expected switch fall-through (Gustavo A. R. Silva)
- Propagate errors for optional regulators and PHYs (Thierry Reding)
- Fix kernel command line resource_alignment parameter issues (Logan
Gunthorpe)"
* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
arm64: tegra: Add configuration for PCIe C5 sideband signals
PCI: tegra: Add support to enable slot regulators
PCI: tegra: Add support to configure sideband pins
PCI: vmd: Fix shadow offsets to reflect spec changes
PCI: vmd: Fix config addressing when using bus offsets
PCI: dwc: Add validation that PCIe core is set to correct mode
PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
PCI: Add ACS quirk for Amazon Annapurna Labs root ports
PCI: Add Amazon's Annapurna Labs vendor ID
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
dt-bindings: PCI: tegra: Add sideband pins configuration entries
PCI: tegra: Add Tegra194 PCIe support
PCI: Get rid of dev->has_secondary_link flag
...
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
7 files changed, 230 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 5561a1c060d0..78494c4050f7 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -11,7 +11,6 @@ Required properties: the ATU address space. (The old way of getting the configuration address space from "ranges" is deprecated and should be avoided.) -- num-lanes: number of lanes to use RC mode: - #address-cells: set to <3> - #size-cells: set to <2> @@ -34,6 +33,11 @@ Optional properties: - clock-names: Must include the following entries: - "pcie" - "pcie_bus" +- snps,enable-cdm-check: This is a boolean property and if present enables + automatic checking of CDM (Configuration Dependent Module) registers + for data corruption. CDM registers include standard PCIe configuration + space registers, Port Logic registers, DMA and iATU (internal Address + Translation Unit) registers. RC mode: - num-viewport: number of view ports configured in hardware. If a platform does not specify it, the driver assumes 2. diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index a7f5f5afa0e6..de4b2baf91e8 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -50,7 +50,7 @@ Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block -- reset-names: Must contain the following entires: +- reset-names: Must contain the following entries: - "pciephy" - "apps" - "turnoff" diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 92437a366e5f..7468d666763a 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -6,6 +6,7 @@ Required properties: "mediatek,mt2712-pcie" "mediatek,mt7622-pcie" "mediatek,mt7623-pcie" + "mediatek,mt7629-pcie" - device_type: Must be "pci" - reg: Base addresses and lengths of the PCIe subsys and root ports. - reg-names: Names of the above areas to use during resource lookup. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt new file mode 100644 index 000000000000..b739f92da58e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -0,0 +1,171 @@ +NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) + +This PCIe host controller is based on the Synopsis Designware PCIe IP +and thus inherits all the common properties defined in designware-pcie.txt. + +Required properties: +- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie". +- device_type: Must be "pci" +- power-domains: A phandle to the node that controls power to the respective + PCIe controller and a specifier name for the PCIe controller. Following are + the specifiers for the different PCIe controllers + TEGRA194_POWER_DOMAIN_PCIEX8B: C0 + TEGRA194_POWER_DOMAIN_PCIEX1A: C1 + TEGRA194_POWER_DOMAIN_PCIEX1A: C2 + TEGRA194_POWER_DOMAIN_PCIEX1A: C3 + TEGRA194_POWER_DOMAIN_PCIEX4A: C4 + TEGRA194_POWER_DOMAIN_PCIEX8A: C5 + these specifiers are defined in + "include/dt-bindings/power/tegra194-powergate.h" file. +- reg: A list of physical base address and length pairs for each set of + controller registers. Must contain an entry for each entry in the reg-names + property. +- reg-names: Must include the following entries: + "appl": Controller's application logic registers + "config": As per the definition in designware-pcie.txt + "atu_dma": iATU and DMA registers. This is where the iATU (internal Address + Translation Unit) registers of the PCIe core are made available + for SW access. + "dbi": The aperture where root port's own configuration registers are + available +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The Tegra interrupt that is asserted for controller interrupts + "msi": The Tegra interrupt that is asserted when an MSI is received +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) + - cell 0 specifies the bus and device numbers of the root port: + [23:16]: bus number + [15:11]: device number + - cell 1 denotes the upper 32 address bits and should be 0 + - cell 2 contains the lower 32 address bits and is used to translate to the + CPU address space +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 7 cells each, where the first three cells + correspond to the address as described for the #address-cells property + above, the fourth and fifth cells are for the physical CPU address to + translate to and the sixth and seventh cells are as described for the + #size-cells property above. + - Entries setup the mapping for the standard I/O, memory and + prefetchable PCI regions. The first cell determines the type of region + that is setup: + - 0x81000000: I/O memory region + - 0x82000000: non-prefetchable memory region + - 0xc2000000: prefetchable memory region + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - core +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - apb + - core +- phys: Must contain a phandle to P2U PHY for each entry in phy-names. +- phy-names: Must include an entry for each active lane. + "p2u-N": where N ranges from 0 to one less than the total number of lanes +- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed + by controller-id. Following are the controller ids for each controller. + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 +- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals + +Optional properties: +- pinctrl-names: A list of pinctrl state names. + It is mandatory for C5 controller and optional for other controllers. + - "default": Configures PCIe I/O for proper operation. +- pinctrl-0: phandle for the 'default' state of pin configuration. + It is mandatory for C5 controller and optional for other controllers. +- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt +- nvidia,update-fc-fixup: This is a boolean property and needs to be present to + improve performance when a platform is designed in such a way that it + satisfies at least one of the following conditions thereby enabling root + port to exchange optimum number of FC (Flow Control) credits with + downstream devices + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS +- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM + to be specified in microseconds +- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be + specified in microseconds +- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be + specified in microseconds +- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot + if the platform has one such slot. (Ex:- x16 slot owned by C5 controller + in p2972-0000 platform). +- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot + if the platform has one such slot. (Ex:- x16 slot owned by C5 controller + in p2972-0000 platform). + +Examples: +========= + +Tegra194: +-------- + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */ + reg-names = "appl", "config", "atu_dma"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */ + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 8324a4ee6f06..7a813d0e6d63 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -11,7 +11,7 @@ Required properties: - reg-names: - "ctrl" for the control register region - "config" for the config space region -- interrupts: Interrupt specifier for the PCIe controler +- interrupts: Interrupt specifier for the PCIe controller - clocks: reference to the PCIe controller clocks - clock-names: mandatory if there is a second clock, in this case the name must be "core" for the first clock and "reg" for the second diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index 2a5d91024059..29bcbd88f457 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -27,6 +27,11 @@ driver implementation may support the following properties: - reset-gpios: If present this property specifies PERST# GPIO. Host drivers can parse the GPIO and apply fundamental reset to endpoints. +- supports-clkreq: + If present this property specifies that CLKREQ signal routing exists from + root port to downstream device and host bridge drivers can do programming + which depends on CLKREQ signal existence. For example, programming root port + not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal. PCI-PCI Bridge properties ------------------------- diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt new file mode 100644 index 000000000000..557a5089229d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pcie-al.txt @@ -0,0 +1,46 @@ +* Amazon Annapurna Labs PCIe host bridge + +Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare +PCI core. It inherits common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Properties of the host controller node that differ from it are: + +- compatible: + Usage: required + Value type: <stringlist> + Definition: Value should contain + - "amazon,al-alpine-v2-pcie" for alpine_v2 + - "amazon,al-alpine-v3-pcie" for alpine_v3 + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: Register ranges as listed in the reg-names property + +- reg-names: + Usage: required + Value type: <stringlist> + Definition: Must include the following entries + - "config" PCIe ECAM space + - "controller" AL proprietary registers + - "dbi" Designware PCIe registers + +Example: + + pcie-external0: pcie@fb600000 { + compatible = "amazon,al-alpine-v3-pcie"; + reg = <0x0 0xfb600000 0x0 0x00100000 + 0x0 0xfd800000 0x0 0x00010000 + 0x0 0xfd810000 0x0 0x00001000>; + reg-names = "config", "controller", "dbi"; + bus-range = <0 255>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x00 0 0 7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ + ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; + }; |