Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This has been sitting in -next for a while with no objections and all
  MIPS defconfigs except one are building fine; that one platform got
  broken by another patch in your tree and I'm going to submit a patch
  separately.

   - a handful of fixes that didn't make 3.11
   - a few bits of Octeon 3 support with more to come for a later
     release
   - platform enhancements for Octeon, ath79, Lantiq, Netlogic and
     Ralink SOCs
   - a GPIO driver for the Octeon
   - some dusting off of the DECstation code
   - the usual dose of cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
  MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
  MIPS: kexec: Fix random crashes while loading crashkernel
  MIPS: kdump: Skip walking indirection page for crashkernels
  MIPS: DECstation HRT calibration bug fixes
  MIPS: Export copy_from_user_page() (needed by lustre)
  MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
  MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
  MIPS: ralink: Add support for reset-controller API
  MIPS: ralink: mt7620: Add cpu-feature-override header
  MIPS: ralink: mt7620: Add spi clock definition
  MIPS: ralink: mt7620: Add wdt clock definition
  MIPS: ralink: mt7620: Improve clock frequency detection
  MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
  MIPS: ralink: mt7620: Add verbose ram info
  MIPS: ralink: Probe clocksources from OF
  MIPS: ralink: Add support for systick timer found on newer ralink SoC
  MIPS: ralink: Add support for periodic timer irq
  MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
  MIPS: Netlogic: Add support for USB on XLP2xx
  MIPS: Netlogic: XLP2xx update for I2C controller
  ...

1 files changed, 190 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 000000000000..8e0a1eb0acbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,190 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+   Required properties:
+
+   - compatible: must be "ralink,rt3883-pci"
+
+   - reg: specifies the physical base address of the controller and
+     the length of the memory mapped region.
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 1.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 1.
+
+   - ranges: specifies the translation between child address space and parent
+     address space
+
+  Optional properties:
+
+   - status: indicates the operational status of the device.
+     Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+   The main node must have two child nodes which describes the built-in
+   interrupt controller and the PCI host bridge.
+
+   a) Interrupt controller:
+
+   Required properties:
+
+   - interrupt-controller: identifies the node as an interrupt controller
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0. As such, 'interrupt-map' nodes do not
+     have to specify a parent unit address.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - interrupt-parent: the phandle for the interrupt controller that
+     services interrupts for this device.
+
+   - interrupts: specifies the interrupt source of the parent interrupt
+     controller. The format of the interrupt specifier depends on the
+     parent interrupt controller.
+
+   b) PCI host bridge:
+
+   Required properties:
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 2.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - device_type: must be "pci"
+
+   - bus-range: PCI bus numbers covered
+
+   - ranges: specifies the ranges for the PCI memory and I/O regions
+
+   - interrupt-map-mask,
+   - interrupt-map: standard PCI properties to define the mapping of the
+     PCI interface to interrupt numbers.
+
+   The PCI host bridge node migh have additional sub-nodes representing
+   the onboard PCI devices/PCI slots. Each such sub-node must have the
+   following mandatory properties:
+
+     - reg: used only for interrupt mapping, so only the first four bytes
+       are used to refer to the correct bus number and device number.
+
+     - device_type: must be "pci"
+
+   If a given sub-node represents a PCI bridge it must have following
+   mandatory properties as well:
+
+     - #address-cells: must be set to <3>
+
+     - #size-cells: must set to <2>
+
+     - #interrupt-cells: must be set to <1>
+
+     - interrupt-map-mask,
+     - interrupt-map: standard PCI properties to define the mapping of the
+       PCI interface to interrupt numbers.
+
+   Besides the required properties the sub-nodes may have these optional
+   properties:
+
+     - status: indicates the operational status of the sub-node.
+       Value must be either "disabled" or "okay".
+
+3) Example:
+
+   a) SoC specific dtsi file:
+
+	pci@10140000 {
+		compatible = "ralink,rt3883-pci";
+		reg = <0x10140000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges; /* direct mapping */
+
+		status = "disabled";
+
+		pciintc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+		};
+
+		host-bridge {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			device_type = "pci";
+
+			bus-range = <0 255>;
+			ranges = <
+				0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+				0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+			>;
+
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 17 */
+				0x8800 0 0 1 &pciintc 18
+				0x8800 0 0 2 &pciintc 18
+				0x8800 0 0 3 &pciintc 18
+				0x8800 0 0 4 &pciintc 18
+				/* IDSEL 18 */
+				0x9000 0 0 1 &pciintc 19
+				0x9000 0 0 2 &pciintc 19
+				0x9000 0 0 3 &pciintc 19
+				0x9000 0 0 4 &pciintc 19
+			>;
+
+			pci-bridge@1 {
+				reg = <0x0800 0 0 0 0>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				interrupt-map-mask = <0x0 0 0 0>;
+				interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+				status = "disabled";
+			};
+
+			pci-slot@17 {
+				reg = <0x8800 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+
+			pci-slot@18 {
+				reg = <0x9000 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+		};
+	};
+
+   b) Board specific dts file:
+
+	pci@10140000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};