Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

1 files changed, 121 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
new file mode 100644
index 000000000000..f2febb94550e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
@@ -0,0 +1,121 @@
+* Broadcom BCM7xxx Ethernet Controller (GENET)
+
+Required properties:
+- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
+  "brcm,genet-v3", "brcm,genet-v4".
+- reg: address and length of the register set for the device
+- interrupts: must be two cells, the first cell is the general purpose
+  interrupt line, while the second cell is the interrupt for the ring
+  RX and TX queues operating in ring mode
+- phy-mode: see ethernet.txt file in the same directory
+- #address-cells: should be 1
+- #size-cells: should be 1
+
+Optional properties:
+- clocks: When provided, must be two phandles to the functional clocks nodes
+  of the GENET block. The first phandle is the main GENET clock used during
+  normal operation, while the second phandle is the Wake-on-LAN clock.
+- clock-names: When provided, names of the functional clock phandles, first
+  name should be "enet" and second should be "enet-wol".
+
+- phy-handle: See ethernet.txt file in the same directory; used to describe
+  configurations where a PHY (internal or external) is used.
+
+- fixed-link: When the GENET interface is connected to a MoCA hardware block or
+  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
+  voluntarily disabled, this property should be used to describe the "fixed link".
+  See Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for information on
+  the property specifics
+
+Required child nodes:
+
+- mdio bus node: this node should always be present regarless of the PHY
+  configuration of the GENET instance
+
+MDIO bus node required properties:
+
+- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
+  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", the version has to match the
+  parent node compatible property (e.g: brcm,genet-v4 pairs with
+  brcm,genet-mdio-v4)
+- reg: address and length relative to the parent node base register address
+- #address-cells: address cell for MDIO bus addressing, should be 1
+- #size-cells: size of the cells for MDIO bus addressing, should be 0
+
+Ethernet PHY node properties:
+
+See Documentation/devicetree/bindings/net/phy.txt for the list of required and
+optional properties.
+
+Internal Gigabit PHY example:
+
+ethernet@f0b60000 {
+	phy-mode = "internal";
+	phy-handle = <&phy1>;
+	mac-address = [ 00 10 18 36 23 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0b60000 0xfc4c>;
+	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+
+	mdio@e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+
+		phy1: ethernet-phy@1 {
+			max-speed = <1000>;
+			reg = <0x1>;
+			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+MoCA interface / MAC to MAC example:
+
+ethernet@f0b80000 {
+	phy-mode = "moca";
+	fixed-link = <1 0 1000 0 0>;
+	mac-address = [ 00 10 18 36 24 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0b80000 0xfc4c>;
+	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+	mdio@e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+	};
+};
+
+
+External MDIO-connected Gigabit PHY/switch:
+
+ethernet@f0ba0000 {
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	mac-address = [ 00 10 18 36 26 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0ba0000 0xfc4c>;
+	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+	mdio@0e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+
+		phy0: ethernet-phy@0 {
+			max-speed = <1000>;
+			reg = <0x0>;
+			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};