summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media
diff options
context:
space:
mode:
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>2014-02-04 20:23:16 -0300
committerMauro Carvalho Chehab <m.chehab@samsung.com>2014-05-25 13:08:51 -0300
commit6fa88045ef7db3d09af80aa00fd7c937b7289387 (patch)
tree7fb55b9117060be014dfd8a76e6139385658d8d9 /Documentation/devicetree/bindings/media
parentf82f313e9739026ca96342b5b44c5c94072e166a (diff)
downloadlinux-6fa88045ef7db3d09af80aa00fd7c937b7289387.tar.bz2
[media] adv7604: Add endpoint properties to DT bindings
Add support for the hsync-active, vsync-active and pclk-sample properties to the DT bindings and control BT.656 mode implicitly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Diffstat (limited to 'Documentation/devicetree/bindings/media')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv7604.txt13
1 files changed, 13 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 2efb48f20fb6..c27cede3bd68 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -33,6 +33,19 @@ Optional Properties:
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
+Optional Endpoint Properties:
+
+ The following three properties are defined in video-interfaces.txt and are
+ valid for source endpoints only.
+
+ - hsync-active: Horizontal synchronization polarity. Defaults to active low.
+ - vsync-active: Vertical synchronization polarity. Defaults to active low.
+ - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge.
+
+ If none of hsync-active, vsync-active and pclk-sample is specified the
+ endpoint will use embedded BT.656 synchronization.
+
+
Example:
hdmi_receiver@4c {