Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "This is another huge branch with close to 450 changessets related to
  devicetree files, roughly half of this for 32-bit and 64-bit
  respectively. There are lots of cleanups and additional hardware
  support for platforms we already support based on SoCs from Renesas,
  ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
  other manufacturers.

  A total of 6 new SoCs and 37 new boards gets added this time, one more
  SoC will come in a follow-up branch. Most of the new boards are for
  64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.

  Going more into details for SoC platforms with new hardware support:

   - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
     platform, usually paired with an external 5G modem. So far we only
     support the Qualcomm SM8150 MTP reference platform, but no actual
     products.

   - For the slightly older Qualcomm platforms, support for several
     interesting products is getting added: Three laptops based on
     Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
     630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
     and several phones based on the older Snapdragon 410/MSM8916
     (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
     aka Wileyfox Swift).

   - Mediatek MT7629 is a new wireless network router chip, similar to
     the older MT7623. It gets added together with the reference board
     implementation.

   - Allwinner V3 is a repackaged version of the existing low-end V3s
     chip, and is used in the tiny Lichee Pi Zero plus, also added here.
     There is also a new TV set-top box based on Allwinner H6, the Tanix
     TX6, and the eMMC variant of the Olimex A64-Olinuxino development
     board.

   - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
     family, similar to the i.MX8M Mini. As usual, there is a large
     number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
     SolidRun Hummingboard Pulse baseboard and System-on-Module,
     Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
     PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
     Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
     phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
     Innovations i.MX7 RMU2 board.

   - In a different NXP product line, the Layerscape LS1046A "Freeway"
     reference board gets added.

   - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
     their set-top-box line and smart speaker with newer CPU and GPU
     cores compared to their predecessors. Both are now also supported
     by the Khadas VIM3 development board series, and the dts files for
     that get reorganized a bit to better deal with all variants.
     Another board based on SM1 that gets added is the SEI Robotics
     SEI610.

   - There are a handful of new x86 and Power9 server boards using
     Aspeed BMC chips that are gaining support for running Linux on the
     BMC through the OpenBMC project: Facebook
     Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
     these are still new machines using SoCs based on the ARM9 and ARM11
     CPU cores, as support for the new Cortex-A7 based AST2600 is still
     ramping up.

   - There are three new end-user products using 32-bit Rockchips SoCs:
     Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
     low-end RK3229 chip, while the two AOpen products Chromebox Mini
     (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
     commercial settings(digital signage, PoS, ...).

   - One more single-board computer based on the popular 64-bit RK3399
     is added: the Leez RK3399 P710"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
  arm64: dts: qcom: Add Lenovo Yoga C630
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  ...

1 files changed, 218 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
new file mode 100644
index 000000000000..aa217b096279
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vin.txt
@@ -0,0 +1,218 @@
+Renesas R-Car Video Input driver (rcar_vin)
+-------------------------------------------
+
+The rcar_vin device provides video input capabilities for the Renesas R-Car
+family of devices.
+
+Each VIN instance has a single parallel input that supports RGB and YUV video,
+with both external synchronization and BT.656 synchronization for the latter.
+Depending on the instance the VIN input is connected to external SoC pins, or
+on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
+
+ - compatible: Must be one or more of the following
+   - "renesas,vin-r8a7743" for the R8A7743 device
+   - "renesas,vin-r8a7744" for the R8A7744 device
+   - "renesas,vin-r8a7745" for the R8A7745 device
+   - "renesas,vin-r8a774a1" for the R8A774A1 device
+   - "renesas,vin-r8a774c0" for the R8A774C0 device
+   - "renesas,vin-r8a7778" for the R8A7778 device
+   - "renesas,vin-r8a7779" for the R8A7779 device
+   - "renesas,vin-r8a7790" for the R8A7790 device
+   - "renesas,vin-r8a7791" for the R8A7791 device
+   - "renesas,vin-r8a7792" for the R8A7792 device
+   - "renesas,vin-r8a7793" for the R8A7793 device
+   - "renesas,vin-r8a7794" for the R8A7794 device
+   - "renesas,vin-r8a7795" for the R8A7795 device
+   - "renesas,vin-r8a7796" for the R8A7796 device
+   - "renesas,vin-r8a77965" for the R8A77965 device
+   - "renesas,vin-r8a77970" for the R8A77970 device
+   - "renesas,vin-r8a77980" for the R8A77980 device
+   - "renesas,vin-r8a77990" for the R8A77990 device
+   - "renesas,vin-r8a77995" for the R8A77995 device
+   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
+     device.
+
+   When compatible with the generic version nodes must list the
+   SoC-specific version corresponding to the platform first
+   followed by the generic version.
+
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+Additionally, an alias named vinX will need to be created to specify
+which video input device this is.
+
+The per-board settings Gen2 platforms:
+
+- port - sub-node describing a single endpoint connected to the VIN
+  from external SoC pins as described in video-interfaces.txt[1].
+  Only the first one will be considered as each vin interface has one
+  input port.
+
+  - Optional properties for endpoint nodes:
+    - hsync-active: see [1] for description. Default is active high.
+    - vsync-active: see [1] for description. Default is active high.
+      If both HSYNC and VSYNC polarities are not specified, embedded
+      synchronization is selected.
+    - field-active-even: see [1] for description. Default is active high.
+    - bus-width: see [1] for description. The selected bus width depends on
+      the SoC type and selected input image format.
+      Valid values are: 8, 10, 12, 16, 24 and 32.
+    - data-shift: see [1] for description. Valid values are 0 and 8.
+    - data-enable-active: polarity of CLKENB signal, see [1] for
+      description. Default is active high.
+
+The per-board settings Gen3 and RZ/G2 platforms:
+
+Gen3 and RZ/G2 platforms can support both a single connected parallel input
+source from external SoC pins (port@0) and/or multiple parallel input sources
+from local SoC CSI-2 receivers (port@1) depending on SoC.
+
+- renesas,id - ID number of the VIN, VINx in the documentation.
+- ports
+    - port@0 - sub-node describing a single endpoint connected to the VIN
+      from external SoC pins as described in video-interfaces.txt[1].
+      Describing more than one endpoint in port@0 is invalid. Only VIN
+      instances that are connected to external pins should have port@0.
+
+      Endpoint nodes of port@0 support the optional properties listed in
+      the Gen2 per-board settings description.
+
+    - port@1 - sub-nodes describing one or more endpoints connected to
+      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
+      use the following schema.
+
+        - endpoint@0 - sub-node describing the endpoint connected to CSI20
+        - endpoint@1 - sub-node describing the endpoint connected to CSI21
+        - endpoint@2 - sub-node describing the endpoint connected to CSI40
+        - endpoint@3 - sub-node describing the endpoint connected to CSI41
+
+      Endpoint nodes of port@1 do not support any optional endpoint property.
+
+Device node example for Gen2 platforms
+--------------------------------------
+
+        aliases {
+                vin0 = &vin0;
+        };
+
+        vin0: vin@e6ef0000 {
+                compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
+                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+                status = "disabled";
+        };
+
+Board setup example for Gen2 platforms (vin1 composite video input)
+-------------------------------------------------------------------
+
+&i2c2   {
+        status = "okay";
+        pinctrl-0 = <&i2c2_pins>;
+        pinctrl-names = "default";
+
+        adv7180@20 {
+                compatible = "adi,adv7180";
+                reg = <0x20>;
+                remote = <&vin1>;
+
+                port {
+                        adv7180: endpoint {
+                                bus-width = <8>;
+                                remote-endpoint = <&vin1ep0>;
+                        };
+                };
+        };
+};
+
+/* composite video input */
+&vin1 {
+        pinctrl-0 = <&vin1_pins>;
+        pinctrl-names = "default";
+
+        status = "okay";
+
+        port {
+                vin1ep0: endpoint {
+                        remote-endpoint = <&adv7180>;
+                        bus-width = <8>;
+                };
+        };
+};
+
+Device node example for Gen3 platforms
+--------------------------------------
+
+        vin0: video@e6ef0000 {
+                compatible = "renesas,vin-r8a7795";
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 811>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 811>;
+                renesas,id = <0>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                reg = <1>;
+
+                                vin0csi20: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint= <&csi20vin0>;
+                                };
+                                vin0csi21: endpoint@1 {
+                                        reg = <1>;
+                                        remote-endpoint= <&csi21vin0>;
+                                };
+                                vin0csi40: endpoint@2 {
+                                        reg = <2>;
+                                        remote-endpoint= <&csi40vin0>;
+                                };
+                        };
+                };
+        };
+
+        csi20: csi2@fea80000 {
+                compatible = "renesas,r8a7795-csi2";
+                reg = <0 0xfea80000 0 0x10000>;
+                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 714>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 714>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                csi20_in: endpoint {
+                                        clock-lanes = <0>;
+                                        data-lanes = <1>;
+                                        remote-endpoint = <&adv7482_txb>;
+                                };
+                        };
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                reg = <1>;
+
+                                csi20vin0: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&vin0csi20>;
+                                };
+                        };
+                };
+        };
+
+[1] video-interfaces.txt common video media interface