diff options
author | Jason Gunthorpe <jgg@mellanox.com> | 2019-08-21 14:10:36 -0300 |
---|---|---|
committer | Jason Gunthorpe <jgg@mellanox.com> | 2019-08-21 14:10:36 -0300 |
commit | 868df536f5e84672c3e002b949e0e44f97cb0f09 (patch) | |
tree | f76da5f6d06125b6d91c75ebfe4079ec9e2f958a /Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt | |
parent | b2299e83815c59ab59c4ee4fb4842b3b28e5072f (diff) | |
parent | fba0e448a2c5b297a4ddc1ec4e48f4aa6600a1c9 (diff) | |
download | linux-868df536f5e84672c3e002b949e0e44f97cb0f09.tar.bz2 |
Merge branch 'odp_fixes' into rdma.git for-next
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt')
-rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt | 16 |
1 files changed, 7 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt index 4e82fd575cec..c676b03c752e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt @@ -5,21 +5,19 @@ Required properties: - compatible: should be "amazon,al-fic" - reg: physical base address and size of the registers - interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: must be 2. - First cell defines the index of the interrupt within the controller. - Second cell is used to specify the trigger type and must be one of the - following: - - bits[3:0] trigger type and level flags - 1 = low-to-high edge triggered - 4 = active high level-sensitive -- interrupt-parent: specifies the parent interrupt controller. +- #interrupt-cells : must be 2. Specifies the number of cells needed to encode + an interrupt source. Supported trigger types are low-to-high edge + triggered and active high level-sensitive. - interrupts: describes which input line in the interrupt parent, this fic's output is connected to. This field property depends on the parent's binding +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + Example: -amazon_fic: interrupt-controller@0xfd8a8500 { +amazon_fic: interrupt-controller@fd8a8500 { compatible = "amazon,al-fic"; interrupt-controller; #interrupt-cells = <2>; |