Merge tag 'drm-misc-next-2019-04-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.2:

UAPI Changes:
- None

Cross-subsystem Changes:
-MAINTAINERS: Add moderation flag for lima mailing list (Randy)
-dt-bindings: Add Mali Bifrost bindings (Neil)
-dt-bindings: Add G12A compatibility strings to meson bindings (Neil)

Core Changes:
-Add a handful of format helpers (Gerd)

Driver Changes:
-cirrus: Driver rewrite megapatch (Gerd)
-meson: Add G12A support to meson driver (Neil)
-lima: Couple fixes (Qiang)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410194907.GA108842@art_vandelay

1 files changed, 92 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
new file mode 100644
index 000000000000..b8be9dbc68b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
@@ -0,0 +1,92 @@
+ARM Mali Bifrost GPU
+====================
+
+Required properties:
+
+- compatible :
+  * Since Mali Bifrost GPU model/revision is fully discoverable by reading
+    some determined registers, must contain the following:
+    + "arm,mali-bifrost"
+  * which must be preceded by one of the following vendor specifics:
+    + "amlogic,meson-g12a-mali"
+
+- reg : Physical base address of the device and length of the register area.
+
+- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
+  in the following defined order.
+
+- interrupt-names : Contains the names of IRQ resources in this exact defined
+  order: "job", "mmu", "gpu".
+
+Optional properties:
+
+- clocks : Phandle to clock for the Mali Bifrost device.
+
+- mali-supply : Phandle to regulator for the Mali device. Refer to
+  Documentation/devicetree/bindings/regulator/regulator.txt for details.
+
+- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
+  for details.
+
+- resets : Phandle of the GPU reset line.
+
+Vendor-specific bindings
+------------------------
+
+The Mali GPU is integrated very differently from one SoC to
+another. In order to accommodate those differences, you have the option
+to specify one more vendor-specific compatible, among:
+
+- "amlogic,meson-g12a-mali"
+  Required properties:
+  - resets : Should contain phandles of :
+    + GPU reset line
+    + GPU APB glue reset line
+
+Example for a Mali-G31:
+
+gpu@ffa30000 {
+	compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+	reg = <0xffe40000 0x10000>;
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "job", "mmu", "gpu";
+	clocks = <&clk CLKID_MALI>;
+	mali-supply = <&vdd_gpu>;
+	operating-points-v2 = <&gpu_opp_table>;
+	resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+};
+
+gpu_opp_table: opp_table0 {
+	compatible = "operating-points-v2";
+
+	opp@533000000 {
+		opp-hz = /bits/ 64 <533000000>;
+		opp-microvolt = <1250000>;
+	};
+	opp@450000000 {
+		opp-hz = /bits/ 64 <450000000>;
+		opp-microvolt = <1150000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1125000>;
+	};
+	opp@350000000 {
+		opp-hz = /bits/ 64 <350000000>;
+		opp-microvolt = <1075000>;
+	};
+	opp@266000000 {
+		opp-hz = /bits/ 64 <266000000>;
+		opp-microvolt = <1025000>;
+	};
+	opp@160000000 {
+		opp-hz = /bits/ 64 <160000000>;
+		opp-microvolt = <925000>;
+	};
+	opp@100000000 {
+		opp-hz = /bits/ 64 <100000000>;
+		opp-microvolt = <912500>;
+	};
+};