Merge tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.8 kernel cycle.

  Core changes:

   - A new GPIO aggregator driver has been merged: this can join a few
     select GPIO lines into a new aggregated GPIO chip. This can be used
     for security: a process can be granted access to only these lines,
     for example for industrial control. Another way to use this is to
     reexpose certain select lines to a virtual machine or container.

   - Warn if the gpio-line-names is too long in he DT parser core.

   - GPIO lines can now be looked up by line name in addition to being
     looked up by offset.

  New drivers:

   - A new generic regmap GPIO driver has been merged. Too many regmap
     drivers are starting to look like each other so we need to create
     some common ground and try to move drivers over to using that.

   - The F7188X driver now supports F81865.

  Driver improvements:

   - Large improvements to the PCA953x expander, get multiple lines and
     several cleanups.

   - Large improvements to the DesignWare DWAPB driver, and Sergey Semin
     has volunteered to maintain it.

   - PL061 can now be built as a module, this is part of a bigger effort
     to make the ARM platforms more modular"

* tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: pca953x: Drop unneeded ACPI_PTR()
  MAINTAINERS: Add gpio regmap section
  gpio: add a reusable generic gpio_chip using regmap
  gpiolib: Introduce gpiochip_irqchip_add_domain()
  gpio: gpiolib: Allow GPIO IRQs to lazy disable
  gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional
  gpio: rcar: Fix runtime PM imbalance on error
  gpio: pca935x: Allow IRQ support for driver built as a module
  gpio: pxa: Add COMPILE_TEST support
  dt-bindings: gpio: Add renesas,em-gio bindings
  MAINTAINERS: Fix file name for DesignWare GPIO DT schema
  gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property
  gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt
  gpio: dwapb: avoid error message for optional IRQ
  gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
  gpio: max730x: bring gpiochip_add_data after port config
  MAINTAINERS: Add GPIO Aggregator section
  docs: gpio: Add GPIO Aggregator documentation
  gpio: Add GPIO Aggregator
  gpiolib: Add support for GPIO lookup by line name
  ...

1 files changed, 0 insertions, 65 deletions

diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
deleted file mode 100644
index 839dd32ffe11..000000000000
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Synopsys DesignWare APB GPIO controller
-
-Required properties:
-- compatible : Should contain "snps,dw-apb-gpio"
-- reg : Address and length of the register set for the device.
-- #address-cells : should be 1 (for addressing port subnodes).
-- #size-cells : should be 0 (port subnodes).
-
-The GPIO controller has a configurable number of ports, each of which are
-represented as child nodes with the following properties:
-
-Required properties:
-- compatible : "snps,dw-apb-gpio-port"
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- reg : The integer port index of the port, a single cell.
-
-Optional properties:
-- interrupt-controller : The first port may be configured to be an interrupt
-controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
-  the second encodes the triger flags encoded as described in
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupts : The interrupts to the parent controller raised when GPIOs
-  generate the interrupts. If the controller provides one combined interrupt
-  for all GPIOs, specify a single interrupt. If the controller provides one
-  interrupt for each GPIO, provide a list of interrupts that correspond to each
-  of the GPIO pins. When specifying multiple interrupts, if any are unconnected,
-  use the interrupts-extended property to specify the interrupts and set the
-  interrupt controller handle for unused interrupts to 0.
-- snps,nr-gpios : The number of pins in the port, a single cell.
-- resets : Reset line for the controller.
-
-Example:
-
-gpio: gpio@20000 {
-	compatible = "snps,dw-apb-gpio";
-	reg = <0x20000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	porta: gpio@0 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&vic1>;
-		interrupts = <0>;
-	};
-
-	portb: gpio@1 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <1>;
-	};
-};