dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema

Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 51 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
deleted file mode 100644
index 965cfa42e025..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
-
-The Low-Power Clock Gate (LPCG) modules contain a local programming
-model to control the clock gates for the peripherals. An LPCG module
-is used to locally gate the clocks for the associated peripheral.
-
-Note:
-This level of clock gating is provided after the clocks are generated
-by the SCU resources and clock controls. Thus even if the clock is
-enabled by these control bits, it might still not be running based
-on the base resource.
-
-Required properties:
-- compatible:	Should be one of:
-		  "fsl,imx8qxp-lpcg-adma",
-		  "fsl,imx8qxp-lpcg-conn",
-		  "fsl,imx8qxp-lpcg-dc",
-		  "fsl,imx8qxp-lpcg-dsp",
-		  "fsl,imx8qxp-lpcg-gpu",
-		  "fsl,imx8qxp-lpcg-hsio",
-		  "fsl,imx8qxp-lpcg-img",
-		  "fsl,imx8qxp-lpcg-lsio",
-		  "fsl,imx8qxp-lpcg-vpu"
-- reg:		Address and length of the register set
-- #clock-cells:	Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Examples:
-
-#include <dt-bindings/clock/imx8qxp-clock.h>
-
-conn_lpcg: clock-controller@5b200000 {
-	compatible = "fsl,imx8qxp-lpcg-conn";
-	reg = <0x5b200000 0xb0000>;
-	#clock-cells = <1>;
-};
-
-usdhc1: mmc@5b010000 {
-	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-	reg = <0x5b010000 0x10000>;
-	clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
-	clock-names = "ipg", "per", "ahb";
-};