summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/arm/arm-boards
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
commitaac59e3efce3dca787b11e34726001603ce3d161 (patch)
tree855d3f967b102877a179e23382be3c2c7fc8d66c /Documentation/devicetree/bindings/arm/arm-boards
parent21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff)
parent005ff5fb077ebf93882bd643932f932a9b402529 (diff)
downloadlinux-aac59e3efce3dca787b11e34726001603ce3d161.tar.bz2
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
Diffstat (limited to 'Documentation/devicetree/bindings/arm/arm-boards')
-rw-r--r--Documentation/devicetree/bindings/arm/arm-boards50
1 files changed, 47 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index db5858e32d3f..5fac246a9530 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -9,9 +9,53 @@ Required properties (in root node):
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
-In the root node the Integrator/CP must have a /cpcon node pointing
-to the CP control registers, and the Integrator/AP must have a
-/syscon node pointing to the Integrator/AP system controller.
+Required nodes:
+
+- core-module: the root node to the Integrator platforms must have
+ a core-module with regs and the compatible string
+ "arm,core-module-integrator"
+
+ Required properties for the core module:
+ - regs: the location and size of the core module registers, one
+ range of 0x200 bytes.
+
+- syscon: the root node of the Integrator platforms must have a
+ system controller node pointong to the control registers,
+ with the compatible string
+ "arm,integrator-ap-syscon"
+ "arm,integrator-cp-syscon"
+ respectively.
+
+ Required properties for the system controller:
+ - regs: the location and size of the system controller registers,
+ one range of 0x100 bytes.
+
+ Required properties for the AP system controller:
+ - interrupts: the AP syscon node must include the logical module
+ interrupts, stated in order of module instance <module 0>,
+ <module 1>, <module 2> ... for the CP system controller this
+ is not required not of any use.
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+ model = "ARM Integrator/AP";
+ compatible = "arm,integrator-ap";
+
+ core-module@10000000 {
+ compatible = "arm,core-module-integrator";
+ reg = <0x10000000 0x200>;
+ };
+
+ syscon {
+ compatible = "arm,integrator-ap-syscon";
+ reg = <0x11000000 0x100>;
+ interrupt-parent = <&pic>;
+ /* These are the logic module IRQs */
+ interrupts = <9>, <10>, <11>, <12>;
+ };
+};
ARM Versatile Application and Platform Baseboards