summaryrefslogtreecommitdiffstats
path: root/Documentation/arm
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2015-01-30 10:45:33 +0100
committerArnd Bergmann <arnd@arndb.de>2015-12-01 21:52:50 +0100
commit4c25c5d2985c1db482cfe59ed9b3a07829a60ba9 (patch)
tree9804ecba1c366ca70050d3261423705d5a600ad9 /Documentation/arm
parent31ade3b83e1821da5fbb2f11b5b3d4ab2ec39db8 (diff)
downloadlinux-4c25c5d2985c1db482cfe59ed9b3a07829a60ba9.tar.bz2
ARM: pxa: make more mach/*.h files local
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation/arm')
-rw-r--r--Documentation/arm/pxa/mfp.txt26
1 files changed, 13 insertions, 13 deletions
diff --git a/Documentation/arm/pxa/mfp.txt b/Documentation/arm/pxa/mfp.txt
index a179e5bc02c9..0b7cab978c02 100644
--- a/Documentation/arm/pxa/mfp.txt
+++ b/Documentation/arm/pxa/mfp.txt
@@ -49,7 +49,7 @@ to this new MFP mechanism, here are several key points:
internal controllers like PWM, SSP and UART, with 128 internal signals
which can be routed to external through one or more MFPs (e.g. GPIO<0>
can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
- see arch/arm/mach-pxa/mach/include/mfp-pxa300.h)
+ see arch/arm/mach-pxa/mfp-pxa300.h)
2. Alternate function configuration is removed from this GPIO controller,
the remaining functions are pure GPIO-specific, i.e.
@@ -76,11 +76,11 @@ For board code writers, here are some guidelines:
1. include ONE of the following header files in your <board>.c:
- - #include <mach/mfp-pxa25x.h>
- - #include <mach/mfp-pxa27x.h>
- - #include <mach/mfp-pxa300.h>
- - #include <mach/mfp-pxa320.h>
- - #include <mach/mfp-pxa930.h>
+ - #include "mfp-pxa25x.h"
+ - #include "mfp-pxa27x.h"
+ - #include "mfp-pxa300.h"
+ - #include "mfp-pxa320.h"
+ - #include "mfp-pxa930.h"
NOTE: only one file in your <board>.c, depending on the processors used,
because pin configuration definitions may conflict in these file (i.e.
@@ -203,20 +203,20 @@ make them effective there-after.
1. Unified pin definitions - enum constants for all configurable pins
2. processor-neutral bit definitions for a possible MFP configuration
- - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+ - arch/arm/mach-pxa/mfp-pxa3xx.h
for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
configurations
- - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+ - arch/arm/mach-pxa/mfp-pxa2xx.h
for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
- - arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
- arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
- arch/arm/mach-pxa/include/mach/mfp-pxa300.h
- arch/arm/mach-pxa/include/mach/mfp-pxa320.h
- arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ - arch/arm/mach-pxa/mfp-pxa25x.h
+ arch/arm/mach-pxa/mfp-pxa27x.h
+ arch/arm/mach-pxa/mfp-pxa300.h
+ arch/arm/mach-pxa/mfp-pxa320.h
+ arch/arm/mach-pxa/mfp-pxa930.h
for processor specific definitions