summaryrefslogtreecommitdiffstats
path: root/Documentation/IRQ-domain.txt
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@s-opensource.com>2017-05-14 15:29:55 -0300
committerJonathan Corbet <corbet@lwn.net>2017-07-14 13:51:41 -0600
commit1642a1e68a70230c4dd0fb1523e1e886e3f5972a (patch)
treeba23c20aca8b2fe5a722fd93f3272095767ca7a2 /Documentation/IRQ-domain.txt
parentae2f26aa4c31498f9bbcfd2f2798d07b4cb82728 (diff)
downloadlinux-1642a1e68a70230c4dd0fb1523e1e886e3f5972a.tar.bz2
IRQ-domain.txt: standardize document format
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - use proper markups for titles; - mark literal blocks as such; - add blank lines where needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/IRQ-domain.txt')
-rw-r--r--Documentation/IRQ-domain.txt69
1 files changed, 49 insertions, 20 deletions
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
index 1f246eb25ca5..4a1cd7645d85 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/IRQ-domain.txt
@@ -1,4 +1,6 @@
-irq_domain interrupt number mapping library
+===============================================
+The irq_domain interrupt number mapping library
+===============================================
The current design of the Linux kernel uses a single large number
space where each separate IRQ source is assigned a different number.
@@ -36,7 +38,9 @@ irq_domain also implements translation from an abstract irq_fwspec
structure to hwirq numbers (Device Tree and ACPI GSI so far), and can
be easily extended to support other IRQ topology data sources.
-=== irq_domain usage ===
+irq_domain usage
+================
+
An interrupt controller driver creates and registers an irq_domain by
calling one of the irq_domain_add_*() functions (each mapping method
has a different allocator function, more on that later). The function
@@ -62,15 +66,21 @@ If the driver has the Linux IRQ number or the irq_data pointer, and
needs to know the associated hwirq number (such as in the irq_chip
callbacks) then it can be directly obtained from irq_data->hwirq.
-=== Types of irq_domain mappings ===
+Types of irq_domain mappings
+============================
+
There are several mechanisms available for reverse mapping from hwirq
to Linux irq, and each mechanism uses a different allocation function.
Which reverse map type should be used depends on the use case. Each
of the reverse map types are described below:
-==== Linear ====
-irq_domain_add_linear()
-irq_domain_create_linear()
+Linear
+------
+
+::
+
+ irq_domain_add_linear()
+ irq_domain_create_linear()
The linear reverse map maintains a fixed size table indexed by the
hwirq number. When a hwirq is mapped, an irq_desc is allocated for
@@ -89,9 +99,13 @@ accepts a more general abstraction 'struct fwnode_handle'.
The majority of drivers should use the linear map.
-==== Tree ====
-irq_domain_add_tree()
-irq_domain_create_tree()
+Tree
+----
+
+::
+
+ irq_domain_add_tree()
+ irq_domain_create_tree()
The irq_domain maintains a radix tree map from hwirq numbers to Linux
IRQs. When an hwirq is mapped, an irq_desc is allocated and the
@@ -109,8 +123,12 @@ accepts a more general abstraction 'struct fwnode_handle'.
Very few drivers should need this mapping.
-==== No Map ===-
-irq_domain_add_nomap()
+No Map
+------
+
+::
+
+ irq_domain_add_nomap()
The No Map mapping is to be used when the hwirq number is
programmable in the hardware. In this case it is best to program the
@@ -121,10 +139,14 @@ Linux IRQ number into the hardware.
Most drivers cannot use this mapping.
-==== Legacy ====
-irq_domain_add_simple()
-irq_domain_add_legacy()
-irq_domain_add_legacy_isa()
+Legacy
+------
+
+::
+
+ irq_domain_add_simple()
+ irq_domain_add_legacy()
+ irq_domain_add_legacy_isa()
The Legacy mapping is a special case for drivers that already have a
range of irq_descs allocated for the hwirqs. It is used when the
@@ -163,14 +185,17 @@ that the driver using the simple domain call irq_create_mapping()
before any irq_find_mapping() since the latter will actually work
for the static IRQ assignment case.
-==== Hierarchy IRQ domain ====
+Hierarchy IRQ domain
+--------------------
+
On some architectures, there may be multiple interrupt controllers
involved in delivering an interrupt from the device to the target CPU.
-Let's look at a typical interrupt delivering path on x86 platforms:
+Let's look at a typical interrupt delivering path on x86 platforms::
-Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU
+ Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU
There are three interrupt controllers involved:
+
1) IOAPIC controller
2) Interrupt remapping controller
3) Local APIC controller
@@ -180,7 +205,8 @@ hardware architecture, an irq_domain data structure is built for each
interrupt controller and those irq_domains are organized into hierarchy.
When building irq_domain hierarchy, the irq_domain near to the device is
child and the irq_domain near to CPU is parent. So a hierarchy structure
-as below will be built for the example above.
+as below will be built for the example above::
+
CPU Vector irq_domain (root irq_domain to manage CPU vectors)
^
|
@@ -190,6 +216,7 @@ as below will be built for the example above.
IOAPIC irq_domain (manage IOAPIC delivery entries/pins)
There are four major interfaces to use hierarchy irq_domain:
+
1) irq_domain_alloc_irqs(): allocate IRQ descriptors and interrupt
controller related resources to deliver these interrupts.
2) irq_domain_free_irqs(): free IRQ descriptors and interrupt controller
@@ -199,7 +226,8 @@ There are four major interfaces to use hierarchy irq_domain:
4) irq_domain_deactivate_irq(): deactivate interrupt controller hardware
to stop delivering the interrupt.
-Following changes are needed to support hierarchy irq_domain.
+Following changes are needed to support hierarchy irq_domain:
+
1) a new field 'parent' is added to struct irq_domain; it's used to
maintain irq_domain hierarchy information.
2) a new field 'parent_data' is added to struct irq_data; it's used to
@@ -223,6 +251,7 @@ software architecture.
For an interrupt controller driver to support hierarchy irq_domain, it
needs to:
+
1) Implement irq_domain_ops.alloc and irq_domain_ops.free
2) Optionally implement irq_domain_ops.activate and
irq_domain_ops.deactivate.