Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Some documentation updates and a few new pixel formats

 - Stop btcx-risc abuse by cx88 and move it to bt8xx driver

 - New platform driver: am437x

 - New webcam driver: toptek

 - New remote controller hardware protocols added to img-ir driver

 - Removal of a few very old drivers that relies on old kABIs and are
   for very hard to find hardware: parallel port webcam drivers
   (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino)

 - Removal of the USB Telegent driver (tlg2300).  The company that
   developed this driver has long gone and the hardware is hard to find.
   As it relies on a legacy set of kABI symbols and nobody seems to care
   about it, remove it.

 - several improvements at rtl2832 driver

 - conversion on cx28521 and au0828 to use videobuf2 (VB2)

 - several improvements, fixups and board additions

* tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  [media] dvb_net: Convert local hex dump to print_hex_dump_debug
  [media] dvb_net: Use standard debugging facilities
  [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses
  [media] staging: lirc_serial: adjust boolean assignments
  [media] stb0899: use sign_extend32() for sign extension
  [media] si2168: add support for 1.7MHz bandwidth
  [media] si2168: return error if set_frontend is called with invalid parameters
  [media] lirc_dev: avoid potential null-dereference
  [media] mn88472: simplify bandwidth registers setting code
  [media] dvb: tc90522: re-add symbol-rate report
  [media] lmedm04: add read snr, signal strength and ber call backs
  [media] lmedm04: Create frontend call back for read status
  [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks
  [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb
  [media] lmedm04: Increase Interupt due time to 200 msec
  [media] cx88-dvb: whitespace cleanup
  [media] rtl28xxu: properly initialize pdata
  [media] rtl2832: declare functions as static
  [media] rtl2830: declare functions as static
  [media] rtl2832_sdr: add kernel-doc comments for platform_data
  ...

9 files changed, 109 insertions, 26 deletions

diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index e013e4bf244c..4e9462f1ab4c 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2692,12 +2692,11 @@ in the S5P family of SoCs by Samsung.
 	      <row><entry></entry></row>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE</constant>&nbsp;</entry>
-		<entry>integer</entry>
-	      </row><row><entry spanname="descr">If the display delay is enabled then the decoder has to return a
-CAPTURE buffer after processing a certain number of OUTPUT buffers. If this number is low, then it may result in
-buffers not being dequeued in display order. In addition hardware may still use those buffers as reference, thus
-application should not write to those buffers. This feature can be used for example for generating thumbnails of videos.
-Applicable to the H264 decoder.
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">If the display delay is enabled then the decoder is forced to return a
+CAPTURE buffer (decoded frame) after processing a certain number of OUTPUT buffers. The delay can be set through
+<constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant>. This feature can be used for example
+for generating thumbnails of videos. Applicable to the H264 decoder.
 	      </entry>
 	      </row>
 	      <row><entry></entry></row>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index c1c62a9acc2a..f34d03ebda3a 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
@@ -17,7 +17,7 @@
       <refsect1>
 	<title>Description</title>
 
-	<para>The following four pixel formats are raw sRGB / Bayer formats with
+	<para>These four pixel formats are raw sRGB / Bayer formats with
 10 bits per colour. Each colour component is stored in a 16-bit word, with 6
 unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
 and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
index 29acc2098cc2..d2e5845e57fb 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml
@@ -25,7 +25,7 @@
 	  </refnamediv>
 	  <refsect1>
 	    <title>Description</title>
-	    <para>The following four pixel formats are raw sRGB / Bayer
+	    <para>These four pixel formats are raw sRGB / Bayer
 	    formats with 10 bits per color compressed to 8 bits each,
 	    using the A-LAW algorithm. Each color component consumes 8
 	    bits of memory. In other respects this format is similar to
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
index 2d3f0b1aefe0..bde89878c5c5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -18,7 +18,7 @@
       <refsect1>
 	<title>Description</title>
 
-	<para>The following four pixel formats are raw sRGB / Bayer formats
+	<para>These four pixel formats are raw sRGB / Bayer formats
 	with 10 bits per colour compressed to 8 bits each, using DPCM
 	compression. DPCM, differential pulse-code modulation, is lossy.
 	Each colour component consumes 8 bits of memory. In other respects
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
new file mode 100644
index 000000000000..30aa63581fe3
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10p.xml
@@ -0,0 +1,99 @@
+    <refentry id="pixfmt-srggb10p">
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_SRGGB10P ('pRAA'),
+	 V4L2_PIX_FMT_SGRBG10P ('pgAA'),
+	 V4L2_PIX_FMT_SGBRG10P ('pGAA'),
+	 V4L2_PIX_FMT_SBGGR10P ('pBAA'),
+	 </refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-SRGGB10P"><constant>V4L2_PIX_FMT_SRGGB10P</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGRBG10P"><constant>V4L2_PIX_FMT_SGRBG10P</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGBRG10P"><constant>V4L2_PIX_FMT_SGBRG10P</constant></refname>
+	<refname id="V4L2-PIX-FMT-SBGGR10P"><constant>V4L2_PIX_FMT_SBGGR10P</constant></refname>
+	<refpurpose>10-bit packed Bayer formats</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>These four pixel formats are packed raw sRGB /
+	Bayer formats with 10 bits per colour. Every four consecutive
+	colour components are packed into 5 bytes. Each of the first 4
+	bytes contain the 8 high order bits of the pixels, and the
+	fifth byte contains the two least significants bits of each
+	pixel, in the same order.</para>
+
+	<para>Each n-pixel row contains n/2 green samples and n/2 blue
+	or red samples, with alternating green-red and green-blue
+	rows. They are conventionally described as GRGR... BGBG...,
+	RGRG... GBGB..., etc. Below is an example of one of these
+	formats:</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_SBGGR10P</constant> 4 &times; 4
+      pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="topbot" colsep="1" rowsep="1">
+	    <tgroup cols="5" align="center" border="1">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>B<subscript>00high</subscript></entry>
+		  <entry>G<subscript>01high</subscript></entry>
+		  <entry>B<subscript>02high</subscript></entry>
+		  <entry>G<subscript>03high</subscript></entry>
+		  <entry>B<subscript>00low</subscript>(bits 7--6)
+			 G<subscript>01low</subscript>(bits 5--4)
+			 B<subscript>02low</subscript>(bits 3--2)
+			 G<subscript>03low</subscript>(bits 1--0)
+		  </entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;5:</entry>
+		  <entry>G<subscript>10high</subscript></entry>
+		  <entry>R<subscript>11high</subscript></entry>
+		  <entry>G<subscript>12high</subscript></entry>
+		  <entry>R<subscript>13high</subscript></entry>
+		  <entry>G<subscript>10low</subscript>(bits 7--6)
+			 R<subscript>11low</subscript>(bits 5--4)
+			 G<subscript>12low</subscript>(bits 3--2)
+			 R<subscript>13low</subscript>(bits 1--0)
+		  </entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;10:</entry>
+		  <entry>B<subscript>20high</subscript></entry>
+		  <entry>G<subscript>21high</subscript></entry>
+		  <entry>B<subscript>22high</subscript></entry>
+		  <entry>G<subscript>23high</subscript></entry>
+		  <entry>B<subscript>20low</subscript>(bits 7--6)
+			 G<subscript>21low</subscript>(bits 5--4)
+			 B<subscript>22low</subscript>(bits 3--2)
+			 G<subscript>23low</subscript>(bits 1--0)
+		  </entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;15:</entry>
+		  <entry>G<subscript>30high</subscript></entry>
+		  <entry>R<subscript>31high</subscript></entry>
+		  <entry>G<subscript>32high</subscript></entry>
+		  <entry>R<subscript>33high</subscript></entry>
+		  <entry>G<subscript>30low</subscript>(bits 7--6)
+			 R<subscript>31low</subscript>(bits 5--4)
+			 G<subscript>32low</subscript>(bits 3--2)
+			 R<subscript>33low</subscript>(bits 1--0)
+		  </entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
index 96947f17fca1..0c8e4adf417f 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
@@ -17,7 +17,7 @@
       <refsect1>
 	<title>Description</title>
 
-	<para>The following four pixel formats are raw sRGB / Bayer formats with
+	<para>These four pixel formats are raw sRGB / Bayer formats with
 12 bits per colour. Each colour component is stored in a 16-bit word, with 4
 unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
 and n/2 blue or red samples, with alternating red and blue rows. Bytes are
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index d5eca4b8f74b..5e0352c50324 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -1405,6 +1405,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb10p;
     &sub-srggb10alaw8;
     &sub-srggb10dpcm8;
     &sub-srggb12;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
index 28a8c1e1c705..a2017bfcaed2 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml
@@ -212,11 +212,3 @@ standards set in the <structfield>standards</structfield> field.
     &return-value;
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
index b9fdfeacdbcb..6e3cadd4e1f9 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml
@@ -131,11 +131,3 @@ is out of bounds or the <structfield>pad</structfield> number is invalid.</para>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->