diff options
| author | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2016-07-27 06:32:31 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2016-07-28 20:08:19 -0300 |
| commit | 43f71d93a0cb342f0c918fba3f6abb7661e40ad2 (patch) | |
| tree | a1dc7288bc480e7027ca1827ca4876472fa12e40 /Documentation/DocBook/media/v4l/controls.xml | |
| parent | ff9a082fda424257976f08fce942609f358015e0 (diff) | |
| download | linux-43f71d93a0cb342f0c918fba3f6abb7661e40ad2.tar.bz2 | |
doc-rst: Remove the media docbook
Now that all media documentation was converted to Sphinx, we
should get rid of the old DocBook one, as we don't want people
to submit patches against the old stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation/DocBook/media/v4l/controls.xml')
| -rw-r--r-- | Documentation/DocBook/media/v4l/controls.xml | 5505 |
1 files changed, 0 insertions, 5505 deletions
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml deleted file mode 100644 index e2e5484d2d9b..000000000000 --- a/Documentation/DocBook/media/v4l/controls.xml +++ /dev/null @@ -1,5505 +0,0 @@ - <section id="control"> - <title>User Controls</title> - - <para>Devices typically have a number of user-settable controls -such as brightness, saturation and so on, which would be presented to -the user on a graphical user interface. But, different devices -will have different controls available, and furthermore, the range of -possible values, and the default value will vary from device to -device. The control ioctls provide the information and a mechanism to -create a nice user interface for these controls that will work -correctly with any device.</para> - - <para>All controls are accessed using an ID value. V4L2 defines -several IDs for specific purposes. Drivers can also implement their -own custom controls using <constant>V4L2_CID_PRIVATE_BASE</constant> -<footnote><para>The use of <constant>V4L2_CID_PRIVATE_BASE</constant> -is problematic because different drivers may use the same -<constant>V4L2_CID_PRIVATE_BASE</constant> ID for different controls. -This makes it hard to programatically set such controls since the meaning -of the control with that ID is driver dependent. In order to resolve this -drivers use unique IDs and the <constant>V4L2_CID_PRIVATE_BASE</constant> -IDs are mapped to those unique IDs by the kernel. Consider these -<constant>V4L2_CID_PRIVATE_BASE</constant> IDs as aliases to the real -IDs.</para> -<para>Many applications today still use the <constant>V4L2_CID_PRIVATE_BASE</constant> -IDs instead of using &VIDIOC-QUERYCTRL; with the <constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant> -flag to enumerate all IDs, so support for <constant>V4L2_CID_PRIVATE_BASE</constant> -is still around.</para></footnote> -and higher values. The pre-defined control IDs have the prefix -<constant>V4L2_CID_</constant>, and are listed in <xref -linkend="control-id" />. The ID is used when querying the attributes of -a control, and when getting or setting the current value.</para> - - <para>Generally applications should present controls to the user -without assumptions about their purpose. Each control comes with a -name string the user is supposed to understand. When the purpose is -non-intuitive the driver writer should provide a user manual, a user -interface plug-in or a driver specific panel application. Predefined -IDs were introduced to change a few controls programmatically, for -example to mute a device during a channel switch.</para> - - <para>Drivers may enumerate different controls after switching -the current video input or output, tuner or modulator, or audio input -or output. Different in the sense of other bounds, another default and -current value, step size or other menu items. A control with a certain -<emphasis>custom</emphasis> ID can also change name and -type.</para> - - <para>If a control is not applicable to the current configuration -of the device (for example, it doesn't apply to the current video input) -drivers set the <constant>V4L2_CTRL_FLAG_INACTIVE</constant> flag.</para> - - <para>Control values are stored globally, they do not -change when switching except to stay within the reported bounds. They -also do not change ⪚ when the device is opened or closed, when the -tuner radio frequency is changed or generally never without -application request.</para> - - <para>V4L2 specifies an event mechanism to notify applications -when controls change value (see &VIDIOC-SUBSCRIBE-EVENT;, event -<constant>V4L2_EVENT_CTRL</constant>), panel applications might want to make -use of that in order to always reflect the correct control value.</para> - - <para> - All controls use machine endianness. - </para> - - <table pgwide="1" frame="none" id="control-id"> - <title>Control IDs</title> - <tgroup cols="3"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Type</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry><constant>V4L2_CID_BASE</constant></entry> - <entry></entry> - <entry>First predefined ID, equal to -<constant>V4L2_CID_BRIGHTNESS</constant>.</entry> - </row> - <row> - <entry><constant>V4L2_CID_USER_BASE</constant></entry> - <entry></entry> - <entry>Synonym of <constant>V4L2_CID_BASE</constant>.</entry> - </row> - <row> - <entry><constant>V4L2_CID_BRIGHTNESS</constant></entry> - <entry>integer</entry> - <entry>Picture brightness, or more precisely, the black -level.</entry> - </row> - <row> - <entry><constant>V4L2_CID_CONTRAST</constant></entry> - <entry>integer</entry> - <entry>Picture contrast or luma gain.</entry> - </row> - <row> - <entry><constant>V4L2_CID_SATURATION</constant></entry> - <entry>integer</entry> - <entry>Picture color saturation or chroma gain.</entry> - </row> - <row> - <entry><constant>V4L2_CID_HUE</constant></entry> - <entry>integer</entry> - <entry>Hue or color balance.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_VOLUME</constant></entry> - <entry>integer</entry> - <entry>Overall audio volume. Note some drivers also -provide an OSS or ALSA mixer interface.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_BALANCE</constant></entry> - <entry>integer</entry> - <entry>Audio stereo balance. Minimum corresponds to all -the way left, maximum to right.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_BASS</constant></entry> - <entry>integer</entry> - <entry>Audio bass adjustment.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_TREBLE</constant></entry> - <entry>integer</entry> - <entry>Audio treble adjustment.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_MUTE</constant></entry> - <entry>boolean</entry> - <entry>Mute audio, &ie; set the volume to zero, however -without affecting <constant>V4L2_CID_AUDIO_VOLUME</constant>. Like -ALSA drivers, V4L2 drivers must mute at load time to avoid excessive -noise. Actually the entire device should be reset to a low power -consumption state.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUDIO_LOUDNESS</constant></entry> - <entry>boolean</entry> - <entry>Loudness mode (bass boost).</entry> - </row> - <row> - <entry><constant>V4L2_CID_BLACK_LEVEL</constant></entry> - <entry>integer</entry> - <entry>Another name for brightness (not a synonym of -<constant>V4L2_CID_BRIGHTNESS</constant>). This control is deprecated -and should not be used in new drivers and applications.</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUTO_WHITE_BALANCE</constant></entry> - <entry>boolean</entry> - <entry>Automatic white balance (cameras).</entry> - </row> - <row> - <entry><constant>V4L2_CID_DO_WHITE_BALANCE</constant></entry> - <entry>button</entry> - <entry>This is an action control. When set (the value is -ignored), the device will do a white balance and then hold the current -setting. Contrast this with the boolean -<constant>V4L2_CID_AUTO_WHITE_BALANCE</constant>, which, when -activated, keeps adjusting the white balance.</entry> - </row> - <row> - <entry><constant>V4L2_CID_RED_BALANCE</constant></entry> - <entry>integer</entry> - <entry>Red chroma balance.</entry> - </row> - <row> - <entry><constant>V4L2_CID_BLUE_BALANCE</constant></entry> - <entry>integer</entry> - <entry>Blue chroma balance.</entry> - </row> - <row> - <entry><constant>V4L2_CID_GAMMA</constant></entry> - <entry>integer</entry> - <entry>Gamma adjust.</entry> - </row> - <row> - <entry><constant>V4L2_CID_WHITENESS</constant></entry> - <entry>integer</entry> - <entry>Whiteness for grey-scale devices. This is a synonym -for <constant>V4L2_CID_GAMMA</constant>. This control is deprecated -and should not be used in new drivers and applications.</entry> - </row> - <row> - <entry><constant>V4L2_CID_EXPOSURE</constant></entry> - <entry>integer</entry> - <entry>Exposure (cameras). [Unit?]</entry> - </row> - <row> - <entry><constant>V4L2_CID_AUTOGAIN</constant></entry> - <entry>boolean</entry> - <entry>Automatic gain/exposure control.</entry> - </row> - <row> - <entry><constant>V4L2_CID_GAIN</constant></entry> - <entry>integer</entry> - <entry>Gain control.</entry> - </row> - <row> - <entry><constant>V4L2_CID_HFLIP</constant></entry> - <entry>boolean</entry> - <entry>Mirror the picture horizontally.</entry> - </row> - <row> - <entry><constant>V4L2_CID_VFLIP</constant></entry> - <entry>boolean</entry> - <entry>Mirror the picture vertically.</entry> - </row> - <row id="v4l2-power-line-frequency"> - <entry><constant>V4L2_CID_POWER_LINE_FREQUENCY</constant></entry> - <entry>enum</entry> - <entry>Enables a power line frequency filter to avoid -flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are: -<constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0), -<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1), -<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and -<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry> - </row> - <row> - <entry><constant>V4L2_CID_HUE_AUTO</constant></entry> - <entry>boolean</entry> - <entry>Enables automatic hue control by the device. The -effect of setting <constant>V4L2_CID_HUE</constant> while automatic -hue control is enabled is undefined, drivers should ignore such -request.</entry> - </row> - <row> - <entry><constant>V4L2_CID_WHITE_BALANCE_TEMPERATURE</constant></entry> - <entry>integer</entry> - <entry>This control specifies the white balance settings -as a color temperature in Kelvin. A driver should have a minimum of -2800 (incandescent) to 6500 (daylight). For more information about -color temperature see <ulink -url="http://en.wikipedia.org/wiki/Color_temperature">Wikipedia</ulink>.</entry> - </row> - <row> - <entry><constant>V4L2_CID_SHARPNESS</constant></entry> - <entry>integer</entry> - <entry>Adjusts the sharpness filters in a camera. The -minimum value disables the filters, higher values give a sharper -picture.</entry> - </row> - <row> - <entry><constant>V4L2_CID_BACKLIGHT_COMPENSATION</constant></entry> - <entry>integer</entry> - <entry>Adjusts the backlight compensation in a camera. The -minimum value disables backlight compensation.</entry> - </row> - <row> - <entry><constant>V4L2_CID_CHROMA_AGC</constant></entry> - <entry>boolean</entry> - <entry>Chroma automatic gain control.</entry> - </row> - <row> - <entry><constant>V4L2_CID_CHROMA_GAIN</constant></entry> - <entry>integer</entry> - <entry>Adjusts the Chroma gain control (for use when chroma AGC - is disabled).</entry> - </row> - <row> - <entry><constant>V4L2_CID_COLOR_KILLER</constant></entry> - <entry>boolean</entry> - <entry>Enable the color killer (&ie; force a black & white image in case of a weak video signal).</entry> - </row> - <row id="v4l2-colorfx"> - <entry><constant>V4L2_CID_COLORFX</constant></entry> - <entry>enum</entry> - <entry>Selects a color effect. The following values are defined: - </entry> - </row><row> - <entry></entry> - <entry></entry> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_COLORFX_NONE</constant> </entry> - <entry>Color effect is disabled.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_ANTIQUE</constant> </entry> - <entry>An aging (old photo) effect.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_ART_FREEZE</constant> </entry> - <entry>Frost color effect.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_AQUA</constant> </entry> - <entry>Water color, cool tone.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_BW</constant> </entry> - <entry>Black and white.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_EMBOSS</constant> </entry> - <entry>Emboss, the highlights and shadows replace light/dark boundaries - and low contrast areas are set to a gray background.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_GRASS_GREEN</constant> </entry> - <entry>Grass green.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_NEGATIVE</constant> </entry> - <entry>Negative.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SEPIA</constant> </entry> - <entry>Sepia tone.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SKETCH</constant> </entry> - <entry>Sketch.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SKIN_WHITEN</constant> </entry> - <entry>Skin whiten.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SKY_BLUE</constant> </entry> - <entry>Sky blue.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SOLARIZATION</constant> </entry> - <entry>Solarization, the image is partially reversed in tone, - only color values above or below a certain threshold are inverted. - </entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SILHOUETTE</constant> </entry> - <entry>Silhouette (outline).</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_VIVID</constant> </entry> - <entry>Vivid colors.</entry> - </row> - <row> - <entry><constant>V4L2_COLORFX_SET_CBCR</constant> </entry> - <entry>The Cb and Cr chroma components are replaced by fixed - coefficients determined by <constant>V4L2_CID_COLORFX_CBCR</constant> - control.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry><constant>V4L2_CID_COLORFX_CBCR</constant></entry> - <entry>integer</entry> - <entry>Determines the Cb and Cr coefficients for <constant>V4L2_COLORFX_SET_CBCR</constant> - color effect. Bits [7:0] of the supplied 32 bit value are interpreted as - Cr component, bits [15:8] as Cb component and bits [31:16] must be zero. - </entry> - </row> - <row> - <entry><constant>V4L2_CID_AUTOBRIGHTNESS</constant></entry> - <entry>boolean</entry> - <entry>Enable Automatic Brightness.</entry> - </row> - <row> - <entry><constant>V4L2_CID_ROTATE</constant></entry> - <entry>integer</entry> - <entry>Rotates the image by specified angle. Common angles are 90, - 270 and 180. Rotating the image to 90 and 270 will reverse the height - and width of the display window. It is necessary to set the new height and - width of the picture using the &VIDIOC-S-FMT; ioctl according to - the rotation angle selected.</entry> - </row> - <row> - <entry><constant>V4L2_CID_BG_COLOR</constant></entry> - <entry>integer</entry> - <entry>Sets the background color on the current output device. - Background color needs to be specified in the RGB24 format. The - supplied 32 bit value is interpreted as bits 0-7 Red color information, - bits 8-15 Green color information, bits 16-23 Blue color - information and bits 24-31 must be zero.</entry> - </row> - <row> - <entry><constant>V4L2_CID_ILLUMINATORS_1</constant> - <constant>V4L2_CID_ILLUMINATORS_2</constant></entry> - <entry>boolean</entry> - <entry>Switch on or off the illuminator 1 or 2 of the device - (usually a microscope).</entry> - </row> - <row> - <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry> - <entry>integer</entry> - <entry>This is a read-only control that can be read by the application -and used as a hint to determine the number of CAPTURE buffers to pass to REQBUFS. -The value is the minimum number of CAPTURE buffers that is necessary for hardware -to work.</entry> - </row> - <row> - <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_OUTPUT</constant></entry> - <entry>integer</entry> - <entry>This is a read-only control that can be read by the application -and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS. -The value is the minimum number of OUTPUT buffers that is necessary for hardware -to work.</entry> - </row> - <row id="v4l2-alpha-component"> - <entry><constant>V4L2_CID_ALPHA_COMPONENT</constant></entry> - <entry>integer</entry> - <entry>Sets the alpha color component. When a capture device (or - capture queue of a mem-to-mem device) produces a frame format that - includes an alpha component - (e.g. <link linkend="rgb-formats">packed RGB image formats</link>) - and the alpha value is not defined by the device or the mem-to-mem - input data this control lets you select the alpha component value of - all pixels. When an output device (or output queue of a mem-to-mem - device) consumes a frame format that doesn't include an alpha - component and the device supports alpha channel processing this - control lets you set the alpha component value of all pixels for - further processing in the device. - </entry> - </row> - <row> - <entry><constant>V4L2_CID_LASTP1</constant></entry> - <entry></entry> - <entry>End of the predefined control IDs (currently - <constant>V4L2_CID_ALPHA_COMPONENT</constant> + 1).</entry> - </row> - <row> - <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry> - <entry></entry> - <entry>ID of the first custom (driver specific) control. -Applications depending on particular custom controls should check the -driver name and version, see <xref linkend="querycap" />.</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>Applications can enumerate the available controls with the -&VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls, get and set a -control value with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls. -Drivers must implement <constant>VIDIOC_QUERYCTRL</constant>, -<constant>VIDIOC_G_CTRL</constant> and -<constant>VIDIOC_S_CTRL</constant> when the device has one or more -controls, <constant>VIDIOC_QUERYMENU</constant> when it has one or -more menu type controls.</para> - - <example id="enum_all_controls"> - <title>Enumerating all user controls</title> - - <programlisting> -&v4l2-queryctrl; queryctrl; -&v4l2-querymenu; querymenu; - -static void enumerate_menu(void) -{ - printf(" Menu items:\n"); - - memset(&querymenu, 0, sizeof(querymenu)); - querymenu.id = queryctrl.id; - - for (querymenu.index = queryctrl.minimum; - querymenu.index <= queryctrl.maximum; - querymenu.index++) { - if (0 == ioctl(fd, &VIDIOC-QUERYMENU;, &querymenu)) { - printf(" %s\n", querymenu.name); - } - } -} - -memset(&queryctrl, 0, sizeof(queryctrl)); - -for (queryctrl.id = V4L2_CID_BASE; - queryctrl.id < V4L2_CID_LASTP1; - queryctrl.id++) { - if (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { - if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) - continue; - - printf("Control %s\n", queryctrl.name); - - if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); - } else { - if (errno == EINVAL) - continue; - - perror("VIDIOC_QUERYCTRL"); - exit(EXIT_FAILURE); - } -} - -for (queryctrl.id = V4L2_CID_PRIVATE_BASE;; - queryctrl.id++) { - if (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { - if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) - continue; - - printf("Control %s\n", queryctrl.name); - - if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); - } else { - if (errno == EINVAL) - break; - - perror("VIDIOC_QUERYCTRL"); - exit(EXIT_FAILURE); - } -} -</programlisting> - </example> - - <example> - <title>Enumerating all user controls (alternative)</title> - <programlisting> -memset(&queryctrl, 0, sizeof(queryctrl)); - -queryctrl.id = V4L2_CTRL_CLASS_USER | V4L2_CTRL_FLAG_NEXT_CTRL; -while (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { - if (V4L2_CTRL_ID2CLASS(queryctrl.id) != V4L2_CTRL_CLASS_USER) - break; - if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) - continue; - - printf("Control %s\n", queryctrl.name); - - if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); - - queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; -} -if (errno != EINVAL) { - perror("VIDIOC_QUERYCTRL"); - exit(EXIT_FAILURE); -} -</programlisting> - </example> - - <example> - <title>Changing controls</title> - - <programlisting> -&v4l2-queryctrl; queryctrl; -&v4l2-control; control; - -memset(&queryctrl, 0, sizeof(queryctrl)); -queryctrl.id = V4L2_CID_BRIGHTNESS; - -if (-1 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { - if (errno != EINVAL) { - perror("VIDIOC_QUERYCTRL"); - exit(EXIT_FAILURE); - } else { - printf("V4L2_CID_BRIGHTNESS is not supported\n"); - } -} else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) { - printf("V4L2_CID_BRIGHTNESS is not supported\n"); -} else { - memset(&control, 0, sizeof (control)); - control.id = V4L2_CID_BRIGHTNESS; - control.value = queryctrl.default_value; - - if (-1 == ioctl(fd, &VIDIOC-S-CTRL;, &control)) { - perror("VIDIOC_S_CTRL"); - exit(EXIT_FAILURE); - } -} - -memset(&control, 0, sizeof(control)); -control.id = V4L2_CID_CONTRAST; - -if (0 == ioctl(fd, &VIDIOC-G-CTRL;, &control)) { - control.value += 1; - - /* The driver may clamp the value or return ERANGE, ignored here */ - - if (-1 == ioctl(fd, &VIDIOC-S-CTRL;, &control) - && errno != ERANGE) { - perror("VIDIOC_S_CTRL"); - exit(EXIT_FAILURE); - } -/* Ignore if V4L2_CID_CONTRAST is unsupported */ -} else if (errno != EINVAL) { - perror("VIDIOC_G_CTRL"); - exit(EXIT_FAILURE); -} - -control.id = V4L2_CID_AUDIO_MUTE; -control.value = 1; /* silence */ - -/* Errors ignored */ -ioctl(fd, VIDIOC_S_CTRL, &control); -</programlisting> - </example> - </section> - - <section id="extended-controls"> - <title>Extended Controls</title> - - <section> - <title>Introduction</title> - - <para>The control mechanism as originally designed was meant -to be used for user settings (brightness, saturation, etc). However, -it turned out to be a very useful model for implementing more -complicated driver APIs where each driver implements only a subset of -a larger API.</para> - - <para>The MPEG encoding API was the driving force behind -designing and implementing this extended control mechanism: the MPEG -standard is quite large and the currently supported hardware MPEG -encoders each only implement a subset of this standard. Further more, -many parameters relating to how the video is encoded into an MPEG -stream are specific to the MPEG encoding chip since the MPEG standard -only defines the format of the resulting MPEG stream, not how the -video is actually encoded into that format.</para> - - <para>Unfortunately, the original control API lacked some -features needed for these new uses and so it was extended into the -(not terribly originally named) extended control API.</para> - - <para>Even though the MPEG encoding API was the first effort -to use the Extended Control API, nowadays there are also other classes -of Extended Controls, such as Camera Controls and FM Transmitter Controls. -The Extended Controls API as well as all Extended Controls classes are -described in the following text.</para> - </section> - - <section> - <title>The Extended Control API</title> - - <para>Three new ioctls are available: &VIDIOC-G-EXT-CTRLS;, -&VIDIOC-S-EXT-CTRLS; and &VIDIOC-TRY-EXT-CTRLS;. These ioctls act on -arrays of controls (as opposed to the &VIDIOC-G-CTRL; and -&VIDIOC-S-CTRL; ioctls that act on a single control). This is needed -since it is often required to atomically change several controls at -once.</para> - - <para>Each of the new ioctls expects a pointer to a -&v4l2-ext-controls;. This structure contains a pointer to the control -array, a count of the number of controls in that array and a control -class. Control classes are used to group similar controls into a -single class. For example, control class -<constant>V4L2_CTRL_CLASS_USER</constant> contains all user controls -(&ie; all controls that can also be set using the old -<constant>VIDIOC_S_CTRL</constant> ioctl). Control class -<constant>V4L2_CTRL_CLASS_MPEG</constant> contains all controls -relating to MPEG encoding, etc.</para> - - <para>All controls in the control array must belong to the -specified control class. An error is returned if this is not the -case.</para> - - <para>It is also possible to use an empty control array (count -== 0) to check whether the specified control class is -supported.</para> - - <para>The control array is a &v4l2-ext-control; array. The -<structname>v4l2_ext_control</structname> structure is very similar to -&v4l2-control;, except for the fact that it also allows for 64-bit -values and pointers to be passed.</para> - - <para>Since the &v4l2-ext-control; supports pointers it is now -also possible to have controls with compound types such as N-dimensional arrays -and/or structures. You need to specify the <constant>V4L2_CTRL_FLAG_NEXT_COMPOUND</constant> -when enumerating controls to actually be able to see such compound controls. -In other words, these controls with compound types should only be used -programmatically.</para> - - <para>Since such compound controls need to expose more information -about themselves than is possible with &VIDIOC-QUERYCTRL; the -&VIDIOC-QUERY-EXT-CTRL; ioctl was added. In particular, this ioctl gives -the dimensions of the N-dimensional array if this control consists of more than -one element.</para> - - <para>It is important to realize that due to the flexibility of -controls it is necessary to check whether the control you want to set -actually is supported in the driver and what the valid range of values -is. So use the &VIDIOC-QUERYCTRL; (or &VIDIOC-QUERY-EXT-CTRL;) and -&VIDIOC-QUERYMENU; ioctls to check this. Also note that it is possible -that some of the menu indices in a control of type -<constant>V4L2_CTRL_TYPE_MENU</constant> may not be supported -(<constant>VIDIOC_QUERYMENU</constant> will return an error). A good -example is the list of supported MPEG audio bitrates. Some drivers only -support one or two bitrates, others support a wider range.</para> - - <para> - All controls use machine endianness. - </para> - </section> - - <section> - <title>Enumerating Extended Controls</title> - - <para>The recommended way to enumerate over the extended -controls is by using &VIDIOC-QUERYCTRL; in combination with the -<constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant> flag:</para> - - <informalexample> - <programlisting> -&v4l2-queryctrl; qctrl; - -qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL; -while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &qctrl)) { - /* ... */ - qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; -} -</programlisting> - </informalexample> - - <para>The initial control ID is set to 0 ORed with the -<constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant> flag. The -<constant>VIDIOC_QUERYCTRL</constant> ioctl will return the first -control with a higher ID than the specified one. When no such controls -are found an error is returned.</para> - - <para>If you want to get all controls within a specific control -class, then you can set the initial -<structfield>qctrl.id</structfield> value to the control class and add -an extra check to break out of the loop when a control of another -control class is found:</para> - - <informalexample> - <programlisting> -qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL; -while (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &qctrl)) { - if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG) - break; - /* ... */ - qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; -} -</programlisting> - </informalexample> - - <para>The 32-bit <structfield>qctrl.id</structfield> value is -subdivided into three bit ranges: the top 4 bits are reserved for -flags (⪚ <constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant>) and are not -actually part of the ID. The remaining 28 bits form the control ID, of -which the most significant 12 bits define the control class and the -least significant 16 bits identify the control within the control -class. It is guaranteed that these last 16 bits are always non-zero -for controls. The range of 0x1000 and up are reserved for -driver-specific controls. The macro -<constant>V4L2_CTRL_ID2CLASS(id)</constant> returns the control class -ID based on a control ID.</para> - - <para>If the driver does not support extended controls, then -<constant>VIDIOC_QUERYCTRL</constant> will fail when used in -combination with <constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant>. In -that case the old method of enumerating control should be used (see -<xref linkend="enum_all_controls" />). But if it is supported, then it is guaranteed to enumerate over -all controls, including driver-private controls.</para> - </section> - - <section> - <title>Creating Control Panels</title> - - <para>It is possible to create control panels for a graphical -user interface where the user can select the various controls. -Basically you will have to iterate over all controls using the method -described above. Each control class starts with a control of type -<constant>V4L2_CTRL_TYPE_CTRL_CLASS</constant>. -<constant>VIDIOC_QUERYCTRL</constant> will return the name of this -control class which can be used as the title of a tab page within a -control panel.</para> - - <para>The flags field of &v4l2-queryctrl; also contains hints on -the behavior of the control. See the &VIDIOC-QUERYCTRL; documentation -for more details.</para> - </section> - - <section id="mpeg-controls"> - <title>Codec Control Reference</title> - - <para>Below all controls within the Codec control class are -described. First the generic controls, then controls specific for -certain hardware.</para> - - <para>Note: These controls are applicable to all codecs and -not just MPEG. The defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG -as the controls were originally made for MPEG codecs and later -extended to cover all encoding formats.</para> - - <section> - <title>Generic Codec Controls</title> - - <table pgwide="1" frame="none" id="mpeg-control-id"> - <title>Codec Control IDs</title> - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The Codec class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class. This description can be used as the -caption of a Tab page in a GUI, for example.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-stream-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_stream_type</entry> - </row><row><entry spanname="descr">The MPEG-1, -2 or -4 -output stream type. One cannot assume anything here. Each hardware -MPEG encoder tends to support different subsets of the available MPEG -stream types. This control is specific to multiplexed MPEG streams. -The currently defined stream types are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_PS</constant> </entry> - <entry>MPEG-2 program stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_TS</constant> </entry> - <entry>MPEG-2 transport stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG1_SS</constant> </entry> - <entry>MPEG-1 system stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_DVD</constant> </entry> - <entry>MPEG-2 DVD-compatible stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG1_VCD</constant> </entry> - <entry>MPEG-1 VCD-compatible stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD</constant> </entry> - <entry>MPEG-2 SVCD-compatible stream</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_PMT</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Program Map Table -Packet ID for the MPEG transport stream (default 16)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_AUDIO</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Audio Packet ID for -the MPEG transport stream (default 256)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_VIDEO</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Video Packet ID for -the MPEG transport stream (default 260)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_PCR</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Packet ID for the -MPEG transport stream carrying PCR fields (default 259)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PES_ID_AUDIO</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Audio ID for MPEG -PES</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PES_ID_VIDEO</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Video ID for MPEG -PES</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-stream-vbi-fmt"> - <entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_VBI_FMT</constant> </entry> - <entry>enum v4l2_mpeg_stream_vbi_fmt</entry> - </row><row><entry spanname="descr">Some cards can embed -VBI data (⪚ Closed Caption, Teletext) into the MPEG stream. This -control selects whether VBI data should be embedded, and if so, what -embedding method should be used. The list of possible VBI formats -depends on the driver. The currently defined VBI format types -are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_STREAM_VBI_FMT_NONE</constant> </entry> - <entry>No VBI in the MPEG stream</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_STREAM_VBI_FMT_IVTV</constant> </entry> - <entry>VBI in private packets, IVTV format (documented -in the kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.vbi</filename>)</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-sampling-freq"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ</constant> </entry> - <entry>enum v4l2_mpeg_audio_sampling_freq</entry> - </row><row><entry spanname="descr">MPEG Audio sampling -frequency. Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100</constant> </entry> - <entry>44.1 kHz</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000</constant> </entry> - <entry>48 kHz</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000</constant> </entry> - <entry>32 kHz</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-encoding"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_ENCODING</constant> </entry> - <entry>enum v4l2_mpeg_audio_encoding</entry> - </row><row><entry spanname="descr">MPEG Audio encoding. -This control is specific to multiplexed MPEG streams. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_1</constant> </entry> - <entry>MPEG-1/2 Layer I encoding</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_2</constant> </entry> - <entry>MPEG-1/2 Layer II encoding</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_3</constant> </entry> - <entry>MPEG-1/2 Layer III encoding</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_ENCODING_AAC</constant> </entry> - <entry>MPEG-2/4 AAC (Advanced Audio Coding)</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_ENCODING_AC3</constant> </entry> - <entry>AC-3 aka ATSC A/52 encoding</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-l1-bitrate"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L1_BITRATE</constant> </entry> - <entry>enum v4l2_mpeg_audio_l1_bitrate</entry> - </row><row><entry spanname="descr">MPEG-1/2 Layer I bitrate. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_32K</constant> </entry> - <entry>32 kbit/s</entry></row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_64K</constant> </entry> - <entry>64 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_96K</constant> </entry> - <entry>96 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_128K</constant> </entry> - <entry>128 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_160K</constant> </entry> - <entry>160 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_192K</constant> </entry> - <entry>192 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_224K</constant> </entry> - <entry>224 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_256K</constant> </entry> - <entry>256 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_288K</constant> </entry> - <entry>288 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_320K</constant> </entry> - <entry>320 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_352K</constant> </entry> - <entry>352 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_384K</constant> </entry> - <entry>384 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_416K</constant> </entry> - <entry>416 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_448K</constant> </entry> - <entry>448 kbit/s</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-l2-bitrate"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L2_BITRATE</constant> </entry> - <entry>enum v4l2_mpeg_audio_l2_bitrate</entry> - </row><row><entry spanname="descr">MPEG-1/2 Layer II bitrate. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_32K</constant> </entry> - <entry>32 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_48K</constant> </entry> - <entry>48 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_56K</constant> </entry> - <entry>56 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_64K</constant> </entry> - <entry>64 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_80K</constant> </entry> - <entry>80 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_96K</constant> </entry> - <entry>96 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_112K</constant> </entry> - <entry>112 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_128K</constant> </entry> - <entry>128 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_160K</constant> </entry> - <entry>160 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_192K</constant> </entry> - <entry>192 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_224K</constant> </entry> - <entry>224 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_256K</constant> </entry> - <entry>256 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_320K</constant> </entry> - <entry>320 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_384K</constant> </entry> - <entry>384 kbit/s</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-l3-bitrate"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L3_BITRATE</constant> </entry> - <entry>enum v4l2_mpeg_audio_l3_bitrate</entry> - </row><row><entry spanname="descr">MPEG-1/2 Layer III bitrate. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_32K</constant> </entry> - <entry>32 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_40K</constant> </entry> - <entry>40 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_48K</constant> </entry> - <entry>48 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_56K</constant> </entry> - <entry>56 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_64K</constant> </entry> - <entry>64 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_80K</constant> </entry> - <entry>80 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_96K</constant> </entry> - <entry>96 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_112K</constant> </entry> - <entry>112 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_128K</constant> </entry> - <entry>128 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_160K</constant> </entry> - <entry>160 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_192K</constant> </entry> - <entry>192 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_224K</constant> </entry> - <entry>224 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_256K</constant> </entry> - <entry>256 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_320K</constant> </entry> - <entry>320 kbit/s</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_AAC_BITRATE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">AAC bitrate in bits per second.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-ac3-bitrate"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_AC3_BITRATE</constant> </entry> - <entry>enum v4l2_mpeg_audio_ac3_bitrate</entry> - </row><row><entry spanname="descr">AC-3 bitrate. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_32K</constant> </entry> - <entry>32 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_40K</constant> </entry> - <entry>40 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_48K</constant> </entry> - <entry>48 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_56K</constant> </entry> - <entry>56 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_64K</constant> </entry> - <entry>64 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_80K</constant> </entry> - <entry>80 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_96K</constant> </entry> - <entry>96 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_112K</constant> </entry> - <entry>112 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_128K</constant> </entry> - <entry>128 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_160K</constant> </entry> - <entry>160 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_192K</constant> </entry> - <entry>192 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_224K</constant> </entry> - <entry>224 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_256K</constant> </entry> - <entry>256 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_320K</constant> </entry> - <entry>320 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_384K</constant> </entry> - <entry>384 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_448K</constant> </entry> - <entry>448 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_512K</constant> </entry> - <entry>512 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_576K</constant> </entry> - <entry>576 kbit/s</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_640K</constant> </entry> - <entry>640 kbit/s</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MODE</constant> </entry> - <entry>enum v4l2_mpeg_audio_mode</entry> - </row><row><entry spanname="descr">MPEG Audio mode. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_STEREO</constant> </entry> - <entry>Stereo</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_JOINT_STEREO</constant> </entry> - <entry>Joint Stereo</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_DUAL</constant> </entry> - <entry>Bilingual</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_MONO</constant> </entry> - <entry>Mono</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-mode-extension"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MODE_EXTENSION</constant> </entry> - <entry>enum v4l2_mpeg_audio_mode_extension</entry> - </row><row><entry spanname="descr">Joint Stereo -audio mode extension. In Layer I and II they indicate which subbands -are in intensity stereo. All other subbands are coded in stereo. Layer -III is not (yet) supported. Possible values -are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4</constant> </entry> - <entry>Subbands 4-31 in intensity stereo</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8</constant> </entry> - <entry>Subbands 8-31 in intensity stereo</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12</constant> </entry> - <entry>Subbands 12-31 in intensity stereo</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16</constant> </entry> - <entry>Subbands 16-31 in intensity stereo</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-emphasis"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_EMPHASIS</constant> </entry> - <entry>enum v4l2_mpeg_audio_emphasis</entry> - </row><row><entry spanname="descr">Audio Emphasis. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_NONE</constant> </entry> - <entry>None</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS</constant> </entry> - <entry>50/15 microsecond emphasis</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17</constant> </entry> - <entry>CCITT J.17</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-crc"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_CRC</constant> </entry> - <entry>enum v4l2_mpeg_audio_crc</entry> - </row><row><entry spanname="descr">CRC method. Possible -values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_CRC_NONE</constant> </entry> - <entry>None</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_CRC_CRC16</constant> </entry> - <entry>16 bit parity check</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MUTE</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Mutes the audio when -capturing. This is not done by muting audio hardware, which can still -produce a slight hiss, but in the encoder itself, guaranteeing a fixed -and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-dec-playback"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> </entry> - <entry>enum v4l2_mpeg_audio_dec_playback</entry> - </row><row><entry spanname="descr">Determines how monolingual audio should be played back. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO</constant> </entry> - <entry>Automatically determines the best playback mode.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO</constant> </entry> - <entry>Stereo playback.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT</constant> </entry> - <entry>Left channel playback.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT</constant> </entry> - <entry>Right channel playback.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO</constant> </entry> - <entry>Mono playback.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO</constant> </entry> - <entry>Stereo playback with swapped left and right channels.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-audio-dec-multilingual-playback"> - <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> </entry> - <entry>enum v4l2_mpeg_audio_dec_playback</entry> - </row><row><entry spanname="descr">Determines how multilingual audio should be played back.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-video-encoding"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant> </entry> - <entry>enum v4l2_mpeg_video_encoding</entry> - </row><row><entry spanname="descr">MPEG Video encoding -method. This control is specific to multiplexed MPEG streams. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_1</constant> </entry> - <entry>MPEG-1 Video encoding</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_2</constant> </entry> - <entry>MPEG-2 Video encoding</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC</constant> </entry> - <entry>MPEG-4 AVC (H.264) Video encoding</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-video-aspect"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ASPECT</constant> </entry> - <entry>enum v4l2_mpeg_video_aspect</entry> - </row><row><entry spanname="descr">Video aspect. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ASPECT_1x1</constant> </entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ASPECT_4x3</constant> </entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ASPECT_16x9</constant> </entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_ASPECT_221x100</constant> </entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_B_FRAMES</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Number of B-Frames -(default 2)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_GOP_SIZE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">GOP size (default -12)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_GOP_CLOSURE</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">GOP closure (default -1)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_PULLDOWN</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Enable 3:2 pulldown -(default 0)</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-video-bitrate-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE_MODE</constant> </entry> - <entry>enum v4l2_mpeg_video_bitrate_mode</entry> - </row><row><entry spanname="descr">Video bitrate mode. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_BITRATE_MODE_VBR</constant> </entry> - <entry>Variable bitrate</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_BITRATE_MODE_CBR</constant> </entry> - <entry>Constant bitrate</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Video bitrate in bits -per second.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE_PEAK</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Peak video bitrate in -bits per second. Must be larger or equal to the average video bitrate. -It is ignored if the video bitrate mode is set to constant -bitrate.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">For every captured -frame, skip this many subsequent frames (default 0).</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MUTE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">"Mutes" the video to a -fixed color when capturing. This is useful for testing, to produce a -fixed video bitstream. 0 = unmuted, 1 = muted.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MUTE_YUV</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Sets the "mute" color -of the video. The supplied 32-bit integer is interpreted as follows (bit -0 = least significant bit):</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry>Bit 0:7</entry> - <entry>V chrominance information</entry> - </row> - <row> - <entry>Bit 8:15</entry> - <entry>U chrominance information</entry> - </row> - <row> - <entry>Bit 16:23</entry> - <entry>Y luminance information</entry> - </row> - <row> - <entry>Bit 24:31</entry> - <entry>Must be zero.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-video-dec-pts"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant> </entry> - <entry>integer64</entry> - </row><row><entry spanname="descr">This read-only control returns the -33-bit video Presentation Time Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of -the currently displayed frame. This is the same PTS as is used in &VIDIOC-DECODER-CMD;.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-video-dec-frame"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant> </entry> - <entry>integer64</entry> - </row><row><entry spanname="descr">This read-only control returns the -frame counter of the frame that is currently displayed (decoded). This value is reset to 0 whenever -the decoder is started.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If enabled the decoder expects to receive a single slice per buffer, otherwise -the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs. -</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enable writing sample aspect ratio in the Video Usability Information. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-vui-sar-idc"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_vui_sar_idc</entry> - </row> - <row><entry spanname="descr">VUI sample aspect ratio indicator for H.264 encoding. The value -is defined in the table E-1 in the standard. Applicable to the H264 encoder.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED</constant> </entry> - <entry>Unspecified</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1</constant> </entry> - <entry>1x1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11</constant> </entry> - <entry>12x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11</constant> </entry> - <entry>10x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11</constant> </entry> - <entry>16x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33</constant> </entry> - <entry>40x33</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11</constant> </entry> - <entry>24x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11</constant> </entry> - <entry>20x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11</constant> </entry> - <entry>32x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33</constant> </entry> - <entry>80x33</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11</constant> </entry> - <entry>18x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11</constant> </entry> - <entry>15x11</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33</constant> </entry> - <entry>64x33</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99</constant> </entry> - <entry>160x99</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3</constant> </entry> - <entry>4x3</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2</constant> </entry> - <entry>3x2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1</constant> </entry> - <entry>2x1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED</constant> </entry> - <entry>Extended SAR</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Extended sample aspect ratio width for H.264 VUI encoding. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Extended sample aspect ratio height for H.264 VUI encoding. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-level"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_level</entry> - </row> - <row><entry spanname="descr">The level information for the H264 video elementary stream. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_0</constant> </entry> - <entry>Level 1.0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1B</constant> </entry> - <entry>Level 1B</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_1</constant> </entry> - <entry>Level 1.1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_2</constant> </entry> - <entry>Level 1.2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_3</constant> </entry> - <entry>Level 1.3</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_0</constant> </entry> - <entry>Level 2.0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_1</constant> </entry> - <entry>Level 2.1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_2</constant> </entry> - <entry>Level 2.2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_0</constant> </entry> - <entry>Level 3.0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_1</constant> </entry> - <entry>Level 3.1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_2</constant> </entry> - <entry>Level 3.2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_0</constant> </entry> - <entry>Level 4.0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_1</constant> </entry> - <entry>Level 4.1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_2</constant> </entry> - <entry>Level 4.2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_5_0</constant> </entry> - <entry>Level 5.0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_5_1</constant> </entry> - <entry>Level 5.1</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-mpeg4-level"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL</constant> </entry> - <entry>enum v4l2_mpeg_video_mpeg4_level</entry> - </row> - <row><entry spanname="descr">The level information for the MPEG4 elementary stream. -Applicable to the MPEG4 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_0</constant> </entry> - <entry>Level 0</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_0B</constant> </entry> - <entry>Level 0b</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_1</constant> </entry> - <entry>Level 1</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_2</constant> </entry> - <entry>Level 2</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_3</constant> </entry> - <entry>Level 3</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_3B</constant> </entry> - <entry>Level 3b</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_4</constant> </entry> - <entry>Level 4</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_LEVEL_5</constant> </entry> - <entry>Level 5</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-profile"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_PROFILE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_profile</entry> - </row> - <row><entry spanname="descr">The profile information for H264. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE</constant> </entry> - <entry>Baseline profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE</constant> </entry> - <entry>Constrained Baseline profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_MAIN</constant> </entry> - <entry>Main profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED</constant> </entry> - <entry>Extended profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH</constant> </entry> - <entry>High profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10</constant> </entry> - <entry>High 10 profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422</constant> </entry> - <entry>High 422 profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE</constant> </entry> - <entry>High 444 Predictive profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA</constant> </entry> - <entry>High 10 Intra profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA</constant> </entry> - <entry>High 422 Intra profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA</constant> </entry> - <entry>High 444 Intra profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA</constant> </entry> - <entry>CAVLC 444 Intra profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE</constant> </entry> - <entry>Scalable Baseline profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH</constant> </entry> - <entry>Scalable High profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA</constant> </entry> - <entry>Scalable High Intra profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH</constant> </entry> - <entry>Stereo High profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH</constant> </entry> - <entry>Multiview High profile</entry> - </row> - - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-mpeg4-profile"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE</constant> </entry> - <entry>enum v4l2_mpeg_video_mpeg4_profile</entry> - </row> - <row><entry spanname="descr">The profile information for MPEG4. -Applicable to the MPEG4 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_PROFILE_SIMPLE</constant> </entry> - <entry>Simple profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_PROFILE_ADVANCED_SIMPLE</constant> </entry> - <entry>Advanced Simple profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_PROFILE_CORE</constant> </entry> - <entry>Core profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_PROFILE_SIMPLE_SCALABLE</constant> </entry> - <entry>Simple Scalable profile</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_PROFILE_ADVANCED_CODING_EFFICIENCY</constant> </entry> - <entry></entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MAX_REF_PIC</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">The maximum number of reference pictures used for encoding. -Applicable to the encoder. -</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-multi-slice-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> </entry> - <entry>enum v4l2_mpeg_video_multi_slice_mode</entry> - </row> - <row><entry spanname="descr">Determines how the encoder should handle division of frame into slices. -Applicable to the encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE</constant> </entry> - <entry>Single slice per frame.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB</constant> </entry> - <entry>Multiple slices with set maximum number of macroblocks per slice.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES</constant> </entry> - <entry>Multiple slice with set maximum size in bytes per slice.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">The maximum number of macroblocks in a slice. Used when -<constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> is set to <constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB</constant>. -Applicable to the encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">The maximum size of a slice in bytes. Used when -<constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> is set to <constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES</constant>. -Applicable to the encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-loop-filter-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_loop_filter_mode</entry> - </row> - <row><entry spanname="descr">Loop filter mode for H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED</constant> </entry> - <entry>Loop filter is enabled.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED</constant> </entry> - <entry>Loop filter is disabled.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY</constant> </entry> - <entry>Loop filter is disabled at the slice boundary.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Loop filter alpha coefficient, defined in the H264 standard. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Loop filter beta coefficient, defined in the H264 standard. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-entropy-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_entropy_mode</entry> - </row> - <row><entry spanname="descr">Entropy coding mode for H264 - CABAC/CAVALC. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC</constant> </entry> - <entry>Use CAVLC entropy coding.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC</constant> </entry> - <entry>Use CABAC entropy coding.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enable 8X8 transform for H264. Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Cyclic intra macroblock refresh. This is the number of continuous macroblocks -refreshed every frame. Each frame a successive set of macroblocks is refreshed until the cycle completes and starts from the -top of the frame. Applicable to H264, H263 and MPEG4 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Frame level rate control enable. -If this control is disabled then the quantization parameter for each frame type is constant and set with appropriate controls -(e.g. <constant>V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP</constant>). -If frame rate control is enabled then quantization parameter is adjusted to meet the chosen bitrate. Minimum and maximum value -for the quantization parameter can be set with appropriate controls (e.g. <constant>V4L2_CID_MPEG_VIDEO_H263_MIN_QP</constant>). -Applicable to encoders.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Macroblock level rate control enable. -Applicable to the MPEG4 and H264 encoders.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_QPEL</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an I frame for H263. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_MIN_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Minimum quantization parameter for H263. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_MAX_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Maximum quantization parameter for H263. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an P frame for H263. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an B frame for H263. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an I frame for H264. Valid range: from 0 to 51.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_MIN_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Minimum quantization parameter for H264. Valid range: from 0 to 51.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_MAX_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Maximum quantization parameter for H264. Valid range: from 0 to 51.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an P frame for H264. Valid range: from 0 to 51.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an B frame for H264. Valid range: from 0 to 51.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an I frame for MPEG4. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Minimum quantization parameter for MPEG4. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Maximum quantization parameter for MPEG4. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an P frame for MPEG4. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an B frame for MPEG4. Valid range: from 1 to 31.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VBV_SIZE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip. -The VBV is defined in the standard as a mean to verify that the produced stream will be successfully decoded. -The standard describes it as "Part of a hypothetical decoder that is conceptually connected to the -output of the encoder. Its purpose is to provide a constraint on the variability of the data rate that an -encoder or editing process may produce.". -Applicable to the MPEG1, MPEG2, MPEG4 encoders.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-vbv-delay"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VBV_DELAY</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Sets the initial delay in milliseconds for -VBV buffer control.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-hor-search-range"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Horizontal search range defines maximum horizontal search area in pixels -to search and match for the present Macroblock (MB) in the reference picture. This V4L2 control macro is used to set -horizontal search range for motion estimation module in video encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-vert-search-range"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Vertical search range defines maximum vertical search area in pixels -to search and match for the present Macroblock (MB) in the reference picture. This V4L2 control macro is used to set -vertical search range for motion estimation module in video encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-force-key-frame"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME</constant> </entry> - <entry>button</entry> - </row><row><entry spanname="descr">Force a key frame for the next queued buffer. Applicable to encoders. -This is a general, codec-agnostic keyframe control.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip. -The CPB is defined in the H264 standard as a mean to verify that the produced stream will be successfully decoded. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_I_PERIOD</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Period between I-frames in the open GOP for H264. In case of an open GOP -this is the period between two I-frames. The period between IDR (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE control. -An IDR frame, which stands for Instantaneous Decoding Refresh is an I-frame after which no prior frames are -referenced. This means that a stream can be restarted from an IDR frame without the need to store or decode any -previous frames. Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-header-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_HEADER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_video_header_mode</entry> - </row> - <row><entry spanname="descr">Determines whether the header is returned as the first buffer or is -it returned together with the first frame. Applicable to encoders. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE</constant> </entry> - <entry>The stream header is returned separately in the first buffer.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME</constant> </entry> - <entry>The stream header is returned together with the first encoded frame.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Repeat the video sequence headers. Repeating these -headers makes random access to the video stream easier. Applicable to the MPEG1, 2 and 4 encoder.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Enabled the deblocking post processing filter for MPEG4 decoder. -Applicable to the MPEG4 decoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">vop_time_increment_resolution value for MPEG4. Applicable to the MPEG4 encoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">vop_time_increment value for MPEG4. Applicable to the MPEG4 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enable generation of frame packing supplemental enhancement information in the encoded bitstream. -The frame packing SEI message contains the arrangement of L and R planes for 3D viewing. Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Sets current frame as frame0 in frame packing SEI. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-sei-fp-arrangement-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_sei_fp_arrangement_type</entry> - </row> - <row><entry spanname="descr">Frame packing arrangement type for H264 SEI. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD</constant> </entry> - <entry>Pixels are alternatively from L and R.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN</constant> </entry> - <entry>L and R are interlaced by column.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW</constant> </entry> - <entry>L and R are interlaced by row.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE</constant> </entry> - <entry>L is on the left, R on the right.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM</constant> </entry> - <entry>L is on top, R on bottom.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL</constant> </entry> - <entry>One view per frame.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables flexible macroblock ordering in the encoded bitstream. It is a technique -used for restructuring the ordering of macroblocks in pictures. Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-fmo-map-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_fmo_map_type</entry> - </row> - <row><entry spanname="descr">When using FMO, the map type divides the image in different scan patterns of macroblocks. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES</constant> </entry> - <entry>Slices are interleaved one after other with macroblocks in run length order.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES</constant> </entry> - <entry>Scatters the macroblocks based on a mathematical function known to both encoder and decoder.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER</constant> </entry> - <entry>Macroblocks arranged in rectangular areas or regions of interest.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT</constant> </entry> - <entry>Slice groups grow in a cyclic way from centre to outwards.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN</constant> </entry> - <entry>Slice groups grow in raster scan pattern from left to right.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN</constant> </entry> - <entry>Slice groups grow in wipe scan pattern from top to bottom.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT</constant> </entry> - <entry>User defined map type.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Number of slice groups in FMO. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-fmo-change-direction"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_fmo_change_dir</entry> - </row> - <row><entry spanname="descr">Specifies a direction of the slice group change for raster and wipe maps. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT</constant> </entry> - <entry>Raster scan or wipe right.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT</constant> </entry> - <entry>Reverse raster scan or wipe left.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Specifies the size of the first slice group for raster and wipe map. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Specifies the number of consecutive macroblocks for the interleaved map. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ASO</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables arbitrary slice ordering in encoded bitstream. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Specifies the slice order in ASO. Applicable to the H264 encoder. -The supplied 32-bit integer is interpreted as follows (bit -0 = least significant bit):</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry>Bit 0:15</entry> - <entry>Slice ID</entry> - </row> - <row> - <entry>Bit 16:32</entry> - <entry>Slice position or order</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables H264 hierarchical coding. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-mpeg-video-h264-hierarchical-coding-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_video_h264_hierarchical_coding_type</entry> - </row> - <row><entry spanname="descr">Specifies the hierarchical coding type. -Applicable to the H264 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B</constant> </entry> - <entry>Hierarchical B coding.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P</constant> </entry> - <entry>Hierarchical P coding.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Specifies the number of hierarchical coding layers. -Applicable to the H264 encoder.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Specifies a user defined QP for each layer. Applicable to the H264 encoder. -The supplied 32-bit integer is interpreted as follows (bit -0 = least significant bit):</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry>Bit 0:15</entry> - <entry>QP value</entry> - </row> - <row> - <entry>Bit 16:32</entry> - <entry>Layer number</entry> - </row> - </tbody> - </entrytbl> - </row> - - </tbody> - </tgroup> - </table> - </section> - - <section> - <title>MFC 5.1 MPEG Controls</title> - - <para>The following MPEG class controls deal with MPEG -decoding and encoding settings that are specific to the Multi Format Codec 5.1 device present -in the S5P family of SoCs by Samsung. -</para> - - <table pgwide="1" frame="none" id="mfc51-control-id"> - <title>MFC 5.1 Control IDs</title> - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">If the display delay is enabled then the decoder is forced to return a -CAPTURE buffer (decoded frame) after processing a certain number of OUTPUT buffers. The delay can be set through -<constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant>. This feature can be used for example -for generating thumbnails of videos. Applicable to the H264 decoder. - </entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Display delay value for H264 decoder. -The decoder is forced to return a decoded frame after the set 'display delay' number of frames. If this number is -low it may result in frames returned out of dispaly order, in addition the hardware may still be using the returned buffer -as a reference picture for subsequent frames. -</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">The number of reference pictures used for encoding a P picture. -Applicable to the H264 encoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_PADDING</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Padding enable in the encoder - use a color instead of repeating border pixels. -Applicable to encoders.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Padding color in the encoder. Applicable to encoders. The supplied 32-bit integer is interpreted as follows (bit -0 = least significant bit):</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry>Bit 0:7</entry> - <entry>V chrominance information</entry> - </row> - <row> - <entry>Bit 8:15</entry> - <entry>U chrominance information</entry> - </row> - <row> - <entry>Bit 16:23</entry> - <entry>Y luminance information</entry> - </row> - <row> - <entry>Bit 24:31</entry> - <entry>Must be zero.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Reaction coefficient for MFC rate control. Applicable to encoders. -<para>Note 1: Valid only when the frame level RC is enabled.</para> -<para>Note 2: For tight CBR, this field must be small (ex. 2 ~ 10). -For VBR, this field must be large (ex. 100 ~ 1000).</para> -<para>Note 3: It is not recommended to use the greater number than FRAME_RATE * (10^9 / BIT_RATE).</para> -</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Adaptive rate control for dark region. -Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>). -Applicable to the H264 encoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Adaptive rate control for smooth region. -Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>). -Applicable to the H264 encoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Adaptive rate control for static region. -Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>). -Applicable to the H264 encoder.</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Adaptive rate control for activity region. -Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>). -Applicable to the H264 encoder.</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-mfc51-video-frame-skip-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE</constant> </entry> - <entry>enum v4l2_mpeg_mfc51_video_frame_skip_mode</entry> - </row> - <row><entry spanname="descr"> -Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then -a chosen data limit then the frame will be skipped. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED</constant> </entry> - <entry>Frame skip mode is disabled.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT</constant> </entry> - <entry>Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT</constant> </entry> - <entry>Frame skip mode enabled and buffer limit is set by the VBV (MPEG1/2/4) or CPB (H264) buffer size control.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Enable rate-control with fixed target bit. -If this setting is enabled, then the rate control logic of the encoder will calculate the average bitrate -for a GOP and keep it below or equal the set bitrate target. Otherwise the rate control logic calculates the -overall average bitrate for the stream and keeps it below or equal to the set bitrate. In the first case -the average bitrate for the whole stream will be smaller then the set bitrate. This is caused because the -average is calculated for smaller number of frames, on the other hand enabling this setting will ensure that -the stream will meet tight bandwidth constraints. Applicable to encoders. -</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-mfc51-video-force-frame-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_mfc51_video_force_frame_type</entry> - </row> - <row><entry spanname="descr">Force a frame type for the next queued buffer. Applicable to encoders. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED</constant> </entry> - <entry>Forcing a specific frame type disabled.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME</constant> </entry> - <entry>Force an I-frame.</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED</constant> </entry> - <entry>Force a non-coded frame.</entry> - </row> - </tbody> - </entrytbl> - </row> - </tbody> - </tgroup> - </table> - </section> - - <section> - <title>CX2341x MPEG Controls</title> - - <para>The following MPEG class controls deal with MPEG -encoding settings that are specific to the Conexant CX23415 and -CX23416 MPEG encoding chips.</para> - - <table pgwide="1" frame="none" id="cx2341x-control-id"> - <title>CX2341x Control IDs</title> - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row id="v4l2-mpeg-cx2341x-video-spatial-filter-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_cx2341x_video_spatial_filter_mode</entry> - </row><row><entry spanname="descr">Sets the Spatial -Filter mode (default <constant>MANUAL</constant>). Possible values -are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL</constant> </entry> - <entry>Choose the filter manually</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO</constant> </entry> - <entry>Choose the filter automatically</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER</constant> </entry> - <entry>integer (0-15)</entry> - </row><row><entry spanname="descr">The setting for the -Spatial Filter. 0 = off, 15 = maximum. (Default is 0.)</entry> - </row> - <row><entry></entry></row> - <row id="luma-spatial-filter-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type</entry> - </row><row><entry spanname="descr">Select the algorithm -to use for the Luma Spatial Filter (default -<constant>1D_HOR</constant>). Possible values:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF</constant> </entry> - <entry>No filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR</constant> </entry> - <entry>One-dimensional horizontal</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT</constant> </entry> - <entry>One-dimensional vertical</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE</constant> </entry> - <entry>Two-dimensional separable</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE</constant> </entry> - <entry>Two-dimensional symmetrical -non-separable</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="chroma-spatial-filter-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type</entry> - </row><row><entry spanname="descr">Select the algorithm -for the Chroma Spatial Filter (default <constant>1D_HOR</constant>). -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF</constant> </entry> - <entry>No filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR</constant> </entry> - <entry>One-dimensional horizontal</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-cx2341x-video-temporal-filter-mode"> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_cx2341x_video_temporal_filter_mode</entry> - </row><row><entry spanname="descr">Sets the Temporal -Filter mode (default <constant>MANUAL</constant>). Possible values -are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL</constant> </entry> - <entry>Choose the filter manually</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO</constant> </entry> - <entry>Choose the filter automatically</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER</constant> </entry> - <entry>integer (0-31)</entry> - </row><row><entry spanname="descr">The setting for the -Temporal Filter. 0 = off, 31 = maximum. (Default is 8 for full-scale -capturing and 0 for scaled capturing.)</entry> - </row> - <row><entry></entry></row> - <row id="v4l2-mpeg-cx2341x-video-median-filter-type"> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_cx2341x_video_median_filter_type</entry> - </row><row><entry spanname="descr">Median Filter Type -(default <constant>OFF</constant>). Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF</constant> </entry> - <entry>No filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR</constant> </entry> - <entry>Horizontal filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT</constant> </entry> - <entry>Vertical filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT</constant> </entry> - <entry>Horizontal and vertical filter</entry> - </row> - <row> - <entry><constant>V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG</constant> </entry> - <entry>Diagonal filter</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM</constant> </entry> - <entry>integer (0-255)</entry> - </row><row><entry spanname="descr">Threshold above which -the luminance median filter is enabled (default 0)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP</constant> </entry> - <entry>integer (0-255)</entry> - </row><row><entry spanname="descr">Threshold below which -the luminance median filter is enabled (default 255)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM</constant> </entry> - <entry>integer (0-255)</entry> - </row><row><entry spanname="descr">Threshold above which -the chroma median filter is enabled (default 0)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP</constant> </entry> - <entry>integer (0-255)</entry> - </row><row><entry spanname="descr">Threshold below which -the chroma median filter is enabled (default 255)</entry> - </row> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">The CX2341X MPEG encoder -can insert one empty MPEG-2 PES packet into the stream between every -four video frames. The packet size is 2048 bytes, including the -packet_start_code_prefix and stream_id fields. The stream_id is 0xBF -(private stream 2). The payload consists of 0x00 bytes, to be filled -in by the application. 0 = do not insert, 1 = insert packets.</entry> - </row> - </tbody> - </tgroup> - </table> - </section> - - <section> - <title>VPX Control Reference</title> - - <para>The VPX controls include controls for encoding parameters - of VPx video codec.</para> - - <table pgwide="1" frame="none" id="vpx-control-id"> - <title>VPX Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - - <row><entry></entry></row> - <row id="v4l2-vpx-num-partitions"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS</constant></entry> - <entry>enum v4l2_vp8_num_partitions</entry> - </row> - <row><entry spanname="descr">The number of token partitions to use in VP8 encoder. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION</constant></entry> - <entry>1 coefficient partition</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS</constant></entry> - <entry>2 coefficient partitions</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS</constant></entry> - <entry>4 coefficient partitions</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS</constant></entry> - <entry>8 coefficient partitions</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4</constant></entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Setting this prevents intra 4x4 mode in the intra mode decision.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-vpx-num-ref-frames"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES</constant></entry> - <entry>enum v4l2_vp8_num_ref_frames</entry> - </row> - <row><entry spanname="descr">The number of reference pictures for encoding P frames. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME</constant></entry> - <entry>Last encoded frame will be searched</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME</constant></entry> - <entry>Two frames will be searched among the last encoded frame, the golden frame -and the alternate reference (altref) frame. The encoder implementation will decide which two are chosen.</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME</constant></entry> - <entry>The last encoded frame, the golden frame and the altref frame will be searched.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL</constant></entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Indicates the loop filter level. The adjustment of the loop -filter level is done via a delta value against a baseline loop filter value.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS</constant></entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">This parameter affects the loop filter. Anything above -zero weakens the deblocking effect on the loop filter.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD</constant></entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the refresh period for the golden frame. The period is defined -in number of frames. For a value of 'n', every nth frame starting from the first key frame will be taken as a golden frame. -For eg. for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden frame refresh period is set as 4, the frames -0, 4, 8 etc will be taken as the golden frames as frame 0 is always a key frame.</entry> - </row> - - <row><entry></entry></row> - <row id="v4l2-vpx-golden-frame-sel"> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL</constant></entry> - <entry>enum v4l2_vp8_golden_frame_sel</entry> - </row> - <row><entry spanname="descr">Selects the golden frame for encoding. -Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV</constant></entry> - <entry>Use the (n-2)th frame as a golden frame, current frame index being 'n'.</entry> - </row> - <row> - <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD</constant></entry> - <entry>Use the previous specific frame indicated by -V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a golden frame.</entry> - </row> - </tbody> - </entrytbl> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_MIN_QP</constant></entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Minimum quantization parameter for VP8.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_MAX_QP</constant></entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Maximum quantization parameter for VP8.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for an I frame for VP8.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Quantization parameter for a P frame for VP8.</entry> - </row> - - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_PROFILE</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Select the desired profile for VPx encoder. -Acceptable values are 0, 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.</entry> - </row> - - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - - </section> - </section> - - <section id="camera-controls"> - <title>Camera Control Reference</title> - - <para>The Camera class includes controls for mechanical (or -equivalent digital) features of a device such as controllable lenses -or sensors.</para> - - <table pgwide="1" frame="none" id="camera-control-id"> - <title>Camera Control IDs</title> - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_CAMERA_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The Camera class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class.</entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-exposure-auto-type"> - <entry spanname="id"><constant>V4L2_CID_EXPOSURE_AUTO</constant> </entry> - <entry>enum v4l2_exposure_auto_type</entry> - </row><row><entry spanname="descr">Enables automatic -adjustments of the exposure time and/or iris aperture. The effect of -manual changes of the exposure time or iris aperture while these -features are enabled is undefined, drivers should ignore such -requests. Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_EXPOSURE_AUTO</constant> </entry> - <entry>Automatic exposure time, automatic iris -aperture.</entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_MANUAL</constant> </entry> - <entry>Manual exposure time, manual iris.</entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_SHUTTER_PRIORITY</constant> </entry> - <entry>Manual exposure time, auto iris.</entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_APERTURE_PRIORITY</constant> </entry> - <entry>Auto exposure time, manual iris.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_EXPOSURE_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Determines the exposure -time of the camera sensor. The exposure time is limited by the frame -interval. Drivers should interpret the values as 100 µs units, -where the value 1 stands for 1/10000th of a second, 10000 for 1 second -and 100000 for 10 seconds.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_EXPOSURE_AUTO_PRIORITY</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">When -<constant>V4L2_CID_EXPOSURE_AUTO</constant> is set to -<constant>AUTO</constant> or <constant>APERTURE_PRIORITY</constant>, -this control determines if the device may dynamically vary the frame -rate. By default this feature is disabled (0) and the frame rate must -remain constant.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_EXPOSURE_BIAS</constant> </entry> - <entry>integer menu</entry> - </row><row><entry spanname="descr"> Determines the automatic -exposure compensation, it is effective only when <constant>V4L2_CID_EXPOSURE_AUTO</constant> -control is set to <constant>AUTO</constant>, <constant>SHUTTER_PRIORITY </constant> -or <constant>APERTURE_PRIORITY</constant>. -It is expressed in terms of EV, drivers should interpret the values as 0.001 EV -units, where the value 1000 stands for +1 EV. -<para>Increasing the exposure compensation value is equivalent to decreasing -the exposure value (EV) and will increase the amount of light at the image -sensor. The camera performs the exposure compensation by adjusting absolute -exposure time and/or aperture.</para></entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-exposure-metering"> - <entry spanname="id"><constant>V4L2_CID_EXPOSURE_METERING</constant> </entry> - <entry>enum v4l2_exposure_metering</entry> - </row><row><entry spanname="descr">Determines how the camera measures -the amount of light available for the frame exposure. Possible values are:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_EXPOSURE_METERING_AVERAGE</constant> </entry> - <entry>Use the light information coming from the entire frame -and average giving no weighting to any particular portion of the metered area. - </entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_METERING_CENTER_WEIGHTED</constant> </entry> - <entry>Average the light information coming from the entire frame -giving priority to the center of the metered area.</entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_METERING_SPOT</constant> </entry> - <entry>Measure only very small area at the center of the frame.</entry> - </row> - <row> - <entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry> - <entry>A multi-zone metering. The light intensity is measured -in several points of the frame and the results are combined. The -algorithm of the zones selection and their significance in calculating the -final value is device dependent.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_PAN_RELATIVE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control turns the -camera horizontally by the specified amount. The unit is undefined. A -positive value moves the camera to the right (clockwise when viewed -from above), a negative value to the left. A value of zero does not -cause motion. This is a write-only control.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_TILT_RELATIVE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control turns the -camera vertically by the specified amount. The unit is undefined. A -positive value moves the camera up, a negative value down. A value of -zero does not cause motion. This is a write-only control.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_PAN_RESET</constant> </entry> - <entry>button</entry> - </row><row><entry spanname="descr">When this control is set, -the camera moves horizontally to the default position.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_TILT_RESET</constant> </entry> - <entry>button</entry> - </row><row><entry spanname="descr">When this control is set, -the camera moves vertically to the default position.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_PAN_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control -turns the camera horizontally to the specified position. Positive -values move the camera to the right (clockwise when viewed from above), -negative values to the left. Drivers should interpret the values as arc -seconds, with valid values between -180 * 3600 and +180 * 3600 -inclusive.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_TILT_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control -turns the camera vertically to the specified position. Positive values -move the camera up, negative values down. Drivers should interpret the -values as arc seconds, with valid values between -180 * 3600 and +180 -* 3600 inclusive.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_FOCUS_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control sets the -focal point of the camera to the specified position. The unit is -undefined. Positive values set the focus closer to the camera, -negative values towards infinity.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_FOCUS_RELATIVE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control moves the -focal point of the camera by the specified amount. The unit is -undefined. Positive values move the focus closer to the camera, -negative values towards infinity. This is a write-only control.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_FOCUS_AUTO</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Enables continuous automatic -focus adjustments. The effect of manual focus adjustments while this feature -is enabled is undefined, drivers should ignore such requests.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_AUTO_FOCUS_START</constant> </entry> - <entry>button</entry> - </row><row><entry spanname="descr">Starts single auto focus process. -The effect of setting this control when <constant>V4L2_CID_FOCUS_AUTO</constant> -is set to <constant>TRUE</constant> (1) is undefined, drivers should ignore -such requests.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_AUTO_FOCUS_STOP</constant> </entry> - <entry>button</entry> - </row><row><entry spanname="descr">Aborts automatic focusing -started with <constant>V4L2_CID_AUTO_FOCUS_START</constant> control. It is -effective only when the continuous autofocus is disabled, that is when -<constant>V4L2_CID_FOCUS_AUTO</constant> control is set to <constant>FALSE -</constant> (0).</entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-auto-focus-status"> - <entry spanname="id"> - <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> </entry> - <entry>bitmask</entry> - </row> - <row><entry spanname="descr">The automatic focus status. This is a read-only - control.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_AUTO_FOCUS_STATUS_IDLE</constant> </entry> - <entry>Automatic focus is not active.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_STATUS_BUSY</constant> </entry> - <entry>Automatic focusing is in progress.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_STATUS_REACHED</constant> </entry> - <entry>Focus has been reached.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_STATUS_FAILED</constant> </entry> - <entry>Automatic focus has failed, the driver will not - transition from this state until another action is - performed by an application.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry spanname="descr"> -Setting <constant>V4L2_LOCK_FOCUS</constant> lock bit of the <constant>V4L2_CID_3A_LOCK -</constant> control may stop updates of the <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> -control value.</entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-auto-focus-range"> - <entry spanname="id"> - <constant>V4L2_CID_AUTO_FOCUS_RANGE</constant> </entry> - <entry>enum v4l2_auto_focus_range</entry> - </row> - <row><entry spanname="descr">Determines auto focus distance range -for which lens may be adjusted. </entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_AUTO_FOCUS_RANGE_AUTO</constant> </entry> - <entry>The camera automatically selects the focus range.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_RANGE_NORMAL</constant> </entry> - <entry>Normal distance range, limited for best automatic focus -performance.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_RANGE_MACRO</constant> </entry> - <entry>Macro (close-up) auto focus. The camera will -use its minimum possible distance for auto focus.</entry> - </row> - <row> - <entry><constant>V4L2_AUTO_FOCUS_RANGE_INFINITY</constant> </entry> - <entry>The lens is set to focus on an object at infinite distance.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_ZOOM_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Specify the objective lens -focal length as an absolute value. The zoom unit is driver-specific and its -value should be a positive integer.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_ZOOM_RELATIVE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Specify the objective lens -focal length relatively to the current value. Positive values move the zoom -lens group towards the telephoto direction, negative values towards the -wide-angle direction. The zoom unit is driver-specific. This is a write-only control.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_ZOOM_CONTINUOUS</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Move the objective lens group -at the specified speed until it reaches physical device limits or until an -explicit request to stop the movement. A positive value moves the zoom lens -group towards the telephoto direction. A value of zero stops the zoom lens -group movement. A negative value moves the zoom lens group towards the -wide-angle direction. The zoom speed unit is driver-specific.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_IRIS_ABSOLUTE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control sets the -camera's aperture to the specified value. The unit is undefined. -Larger values open the iris wider, smaller values close it.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_IRIS_RELATIVE</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control modifies the -camera's aperture by the specified amount. The unit is undefined. -Positive values open the iris one step further, negative values close -it one step further. This is a write-only control.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_PRIVACY</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Prevent video from being acquired -by the camera. When this control is set to <constant>TRUE</constant> (1), no -image can be captured by the camera. Common means to enforce privacy are -mechanical obturation of the sensor and firmware image processing, but the -device is not restricted to these methods. Devices that implement the privacy -control must support read access and may support write access.</entry> - </row> - - <row> - <entry spanname="id"><constant>V4L2_CID_BAND_STOP_FILTER</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">Switch the band-stop filter of a -camera sensor on or off, or specify its strength. Such band-stop filters can -be used, for example, to filter out the fluorescent light component.</entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-auto-n-preset-white-balance"> - <entry spanname="id"><constant>V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE</constant> </entry> - <entry>enum v4l2_auto_n_preset_white_balance</entry> - </row><row><entry spanname="descr">Sets white balance to automatic, -manual or a preset. The presets determine color temperature of the light as -a hint to the camera for white balance adjustments resulting in most accurate -color representation. The following white balance presets are listed in order -of increasing color temperature.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_WHITE_BALANCE_MANUAL</constant> </entry> - <entry>Manual white balance.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_AUTO</constant> </entry> - <entry>Automatic white balance adjustments.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_INCANDESCENT</constant> </entry> - <entry>White balance setting for incandescent (tungsten) lighting. -It generally cools down the colors and corresponds approximately to 2500...3500 K -color temperature range.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_FLUORESCENT</constant> </entry> - <entry>White balance preset for fluorescent lighting. -It corresponds approximately to 4000...5000 K color temperature.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_FLUORESCENT_H</constant> </entry> - <entry>With this setting the camera will compensate for -fluorescent H lighting.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_HORIZON</constant> </entry> - <entry>White balance setting for horizon daylight. -It corresponds approximately to 5000 K color temperature.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_DAYLIGHT</constant> </entry> - <entry>White balance preset for daylight (with clear sky). -It corresponds approximately to 5000...6500 K color temperature.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_FLASH</constant> </entry> - <entry>With this setting the camera will compensate for the flash -light. It slightly warms up the colors and corresponds roughly to 5000...5500 K -color temperature.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_CLOUDY</constant> </entry> - <entry>White balance preset for moderately overcast sky. -This option corresponds approximately to 6500...8000 K color temperature -range.</entry> - </row> - <row> - <entry><constant>V4L2_WHITE_BALANCE_SHADE</constant> </entry> - <entry>White balance preset for shade or heavily overcast -sky. It corresponds approximately to 9000...10000 K color temperature. -</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row id="v4l2-wide-dynamic-range"> - <entry spanname="id"><constant>V4L2_CID_WIDE_DYNAMIC_RANGE</constant></entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables or disables the camera's wide dynamic -range feature. This feature allows to obtain clear images in situations where -intensity of the illumination varies significantly throughout the scene, i.e. -there are simultaneously very dark and very bright areas. It is most commonly -realized in cameras by combining two subsequent frames with different exposure -times. <footnote id="ctypeconv"><para> This control may be changed to a menu -control in the future, if more options are required.</para></footnote></entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-image-stabilization"> - <entry spanname="id"><constant>V4L2_CID_IMAGE_STABILIZATION</constant></entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables or disables image stabilization. - <footnoteref linkend="ctypeconv"/></entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_ISO_SENSITIVITY</constant> </entry> - <entry>integer menu</entry> - </row><row><entry spanname="descr">Determines ISO equivalent of an -image sensor indicating the sensor's sensitivity to light. The numbers are -expressed in arithmetic scale, as per <xref linkend="iso12232" /> standard, -where doubling the sensor sensitivity is represented by doubling the numerical -ISO value. Applications should interpret the values as standard ISO values -multiplied by 1000, e.g. control value 800 stands for ISO 0.8. Drivers will -usually support only a subset of standard ISO values. The effect of setting -this control while the <constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> -control is set to a value other than <constant>V4L2_CID_ISO_SENSITIVITY_MANUAL -</constant> is undefined, drivers should ignore such requests.</entry> - </row> - <row><entry></entry></row> - - <row id="v4l2-iso-sensitivity-auto-type"> - <entry spanname="id"><constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> </entry> - <entry>enum v4l2_iso_sensitivity_type</entry> - </row><row><entry spanname="descr">Enables or disables automatic ISO -sensitivity adjustments.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_CID_ISO_SENSITIVITY_MANUAL</constant> </entry> - <entry>Manual ISO sensitivity.</entry> - </row> - <row> - <entry><constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> </entry> - <entry>Automatic ISO sensitivity adjustments.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row id="v4l2-scene-mode"> - <entry spanname="id"><constant>V4L2_CID_SCENE_MODE</constant> </entry> - <entry>enum v4l2_scene_mode</entry> - </row><row><entry spanname="descr">This control allows to select -scene programs as the camera automatic modes optimized for common shooting -scenes. Within these modes the camera determines best exposure, aperture, -focusing, light metering, white balance and equivalent sensitivity. The -controls of those parameters are influenced by the scene mode control. -An exact behavior in each mode is subject to the camera specification. - -<para>When the scene mode feature is not used, this control should be set to -<constant>V4L2_SCENE_MODE_NONE</constant> to make sure the other possibly -related controls are accessible. The following scene programs are defined: -</para> -</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_SCENE_MODE_NONE</constant> </entry> - <entry>The scene mode feature is disabled.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_BACKLIGHT</constant> </entry> - <entry>Backlight. Compensates for dark shadows when light is - coming from behind a subject, also by automatically turning - on the flash.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_BEACH_SNOW</constant> </entry> - <entry>Beach and snow. This mode compensates for all-white or -bright scenes, which tend to look gray and low contrast, when camera's automatic -exposure is based on an average scene brightness. To compensate, this mode -automatically slightly overexposes the frames. The white balance may also be -adjusted to compensate for the fact that reflected snow looks bluish rather -than white.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_CANDLELIGHT</constant> </entry> - <entry>Candle light. The camera generally raises the ISO -sensitivity and lowers the shutter speed. This mode compensates for relatively -close subject in the scene. The flash is disabled in order to preserve the -ambiance of the light.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_DAWN_DUSK</constant> </entry> - <entry>Dawn and dusk. Preserves the colors seen in low -natural light before dusk and after down. The camera may turn off the flash, -and automatically focus at infinity. It will usually boost saturation and -lower the shutter speed.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_FALL_COLORS</constant> </entry> - <entry>Fall colors. Increases saturation and adjusts white -balance for color enhancement. Pictures of autumn leaves get saturated reds -and yellows.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_FIREWORKS</constant> </entry> - <entry>Fireworks. Long exposure times are used to capture -the expanding burst of light from a firework. The camera may invoke image -stabilization.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_LANDSCAPE</constant> </entry> - <entry>Landscape. The camera may choose a small aperture to -provide deep depth of field and long exposure duration to help capture detail -in dim light conditions. The focus is fixed at infinity. Suitable for distant -and wide scenery.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_NIGHT</constant> </entry> - <entry>Night, also known as Night Landscape. Designed for low -light conditions, it preserves detail in the dark areas without blowing out bright -objects. The camera generally sets itself to a medium-to-high ISO sensitivity, -with a relatively long exposure time, and turns flash off. As such, there will be -increased image noise and the possibility of blurred image.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_PARTY_INDOOR</constant> </entry> - <entry>Party and indoor. Designed to capture indoor scenes -that are lit by indoor background lighting as well as the flash. The camera -usually increases ISO sensitivity, and adjusts exposure for the low light -conditions.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_PORTRAIT</constant> </entry> - <entry>Portrait. The camera adjusts the aperture so that the -depth of field is reduced, which helps to isolate the subject against a smooth -background. Most cameras recognize the presence of faces in the scene and focus -on them. The color hue is adjusted to enhance skin tones. The intensity of the -flash is often reduced.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_SPORTS</constant> </entry> - <entry>Sports. Significantly increases ISO and uses a fast -shutter speed to freeze motion of rapidly-moving subjects. Increased image -noise may be seen in this mode.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_SUNSET</constant> </entry> - <entry>Sunset. Preserves deep hues seen in sunsets and -sunrises. It bumps up the saturation.</entry> - </row> - <row> - <entry><constant>V4L2_SCENE_MODE_TEXT</constant> </entry> - <entry>Text. It applies extra contrast and sharpness, it is -typically a black-and-white mode optimized for readability. Automatic focus -may be switched to close-up mode and this setting may also involve some -lens-distortion correction.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_3A_LOCK</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">This control locks or unlocks the automatic -focus, exposure and white balance. The automatic adjustments can be paused -independently by setting the corresponding lock bit to 1. The camera then retains -the settings until the lock bit is cleared. The following lock bits are defined: -</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_LOCK_EXPOSURE</constant></entry> - <entry>Automatic exposure adjustments lock.</entry> - </row> - <row> - <entry><constant>V4L2_LOCK_WHITE_BALANCE</constant></entry> - <entry>Automatic white balance adjustments lock.</entry> - </row> - <row> - <entry><constant>V4L2_LOCK_FOCUS</constant></entry> - <entry>Automatic focus lock.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry spanname="descr"> -When a given algorithm is not enabled, drivers should ignore requests -to lock it and should return no error. An example might be an application -setting bit <constant>V4L2_LOCK_WHITE_BALANCE</constant> when the -<constant>V4L2_CID_AUTO_WHITE_BALANCE</constant> control is set to -<constant>FALSE</constant>. The value of this control may be changed -by exposure, white balance or focus controls.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_PAN_SPEED</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control turns the -camera horizontally at the specific speed. The unit is undefined. A -positive value moves the camera to the right (clockwise when viewed -from above), a negative value to the left. A value of zero stops the motion -if one is in progress and has no effect otherwise.</entry> - </row> - <row><entry></entry></row> - - <row> - <entry spanname="id"><constant>V4L2_CID_TILT_SPEED</constant> </entry> - <entry>integer</entry> - </row><row><entry spanname="descr">This control turns the -camera vertically at the specified speed. The unit is undefined. A -positive value moves the camera up, a negative value down. A value of zero -stops the motion if one is in progress and has no effect otherwise.</entry> - </row> - <row><entry></entry></row> - - </tbody> - </tgroup> - </table> - </section> - - <section id="fm-tx-controls"> - <title>FM Transmitter Control Reference</title> - - <para>The FM Transmitter (FM_TX) class includes controls for common features of -FM transmissions capable devices. Currently this class includes parameters for audio -compression, pilot tone generation, audio deviation limiter, RDS transmission and -tuning power features.</para> - - <table pgwide="1" frame="none" id="fm-tx-control-id"> - <title>FM_TX Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_FM_TX_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The FM_TX class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_DEVIATION</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Configures RDS signal frequency deviation level in Hz. -The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_PI</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the RDS Programme Identification field -for transmission.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_PTY</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the RDS Programme Type field for transmission. -This encodes up to 31 pre-defined programme types.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_PS_NAME</constant> </entry> - <entry>string</entry> - </row> - <row><entry spanname="descr">Sets the Programme Service name (PS_NAME) for transmission. -It is intended for static display on a receiver. It is the primary aid to listeners in programme service -identification and selection. In Annex E of <xref linkend="iec62106" />, the RDS specification, -there is a full description of the correct character encoding for Programme Service name strings. -Also from RDS specification, PS is usually a single eight character text. However, it is also possible -to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured -with steps of 8 characters. The result is it must always contain a string with size multiple of 8.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_RADIO_TEXT</constant> </entry> - <entry>string</entry> - </row> - <row><entry spanname="descr">Sets the Radio Text info for transmission. It is a textual description of -what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, -programme-related information or any other text. In these cases, RadioText should be used in addition to -<constant>V4L2_CID_RDS_TX_PS_NAME</constant>. The encoding for Radio Text strings is also fully described -in Annex E of <xref linkend="iec62106" />. The length of Radio Text strings depends on which RDS Block is being -used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible -to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured -with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_MONO_STEREO</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Sets the Mono/Stereo bit of the Decoder Identification code. If set, -then the audio was recorded as stereo.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_ARTIFICIAL_HEAD</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Sets the -<ulink url="http://en.wikipedia.org/wiki/Artificial_head">Artificial Head</ulink> bit of the Decoder -Identification code. If set, then the audio was recorded using an artificial head.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_COMPRESSED</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Sets the Compressed bit of the Decoder Identification code. If set, -then the audio is compressed.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_DYNAMIC_PTY</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Sets the Dynamic PTY bit of the Decoder Identification code. If set, -then the PTY code is dynamically switched.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then a traffic announcement is in progress.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_TRAFFIC_PROGRAM</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then the tuned programme carries traffic announcements.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_MUSIC_SPEECH</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then this channel broadcasts music. If cleared, then it -broadcasts speech. If the transmitter doesn't make this distinction, then it should be set.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_ALT_FREQS_ENABLE</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then transmit alternate frequencies.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_TX_ALT_FREQS</constant> </entry> - <entry>__u32 array</entry> - </row> - <row><entry spanname="descr">The alternate frequencies in kHz units. The RDS standard allows -for up to 25 frequencies to be defined. Drivers may support fewer frequencies so check -the array size.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_LIMITER_ENABLED</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables or disables the audio deviation limiter feature. -The limiter is useful when trying to maximize the audio volume, minimize receiver-generated -distortion and prevent overmodulation. -</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_LIMITER_RELEASE_TIME</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the audio deviation limiter feature release time. -Unit is in useconds. Step and range are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_LIMITER_DEVIATION</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Configures audio frequency deviation level in Hz. -The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_COMPRESSION_ENABLED</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables or disables the audio compression feature. -This feature amplifies signals below the threshold by a fixed gain and compresses audio -signals above the threshold by the ratio of Threshold/(Gain + Threshold).</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_COMPRESSION_GAIN</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the gain for audio compression feature. It is -a dB value. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_COMPRESSION_THRESHOLD</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the threshold level for audio compression freature. -It is a dB value. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the attack time for audio compression feature. -It is a useconds value. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the release time for audio compression feature. -It is a useconds value. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_PILOT_TONE_ENABLED</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enables or disables the pilot tone generation feature.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_PILOT_TONE_DEVIATION</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Configures pilot tone frequency deviation level. Unit is -in Hz. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_PILOT_TONE_FREQUENCY</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Configures pilot tone frequency value. Unit is -in Hz. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TUNE_PREEMPHASIS</constant> </entry> - <entry>enum v4l2_preemphasis</entry> - </row> - <row id="v4l2-preemphasis"><entry spanname="descr">Configures the pre-emphasis value for broadcasting. -A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. -Depending on the region, a time constant of either 50 or 75 useconds is used. The enum v4l2_preemphasis -defines possible values for pre-emphasis. Here they are:</entry> - </row><row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_PREEMPHASIS_DISABLED</constant> </entry> - <entry>No pre-emphasis is applied.</entry> - </row> - <row> - <entry><constant>V4L2_PREEMPHASIS_50_uS</constant> </entry> - <entry>A pre-emphasis of 50 uS is used.</entry> - </row> - <row> - <entry><constant>V4L2_PREEMPHASIS_75_uS</constant> </entry> - <entry>A pre-emphasis of 75 uS is used.</entry> - </row> - </tbody> - </entrytbl> - - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TUNE_POWER_LEVEL</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the output power level for signal transmission. -Unit is in dBuV. Range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TUNE_ANTENNA_CAPACITOR</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">This selects the value of antenna tuning capacitor -manually or automatically if set to zero. Unit, range and step are driver-specific.</entry> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - -<para>For more details about RDS specification, refer to -<xref linkend="iec62106" /> document, from CENELEC.</para> - </section> - - <section id="flash-controls"> - <title>Flash Control Reference</title> - - <para> - The V4L2 flash controls are intended to provide generic access - to flash controller devices. Flash controller devices are - typically used in digital cameras. - </para> - - <para> - The interface can support both LED and xenon flash devices. As - of writing this, there is no xenon flash driver using this - interface. - </para> - - <section id="flash-controls-use-cases"> - <title>Supported use cases</title> - - <section> - <title>Unsynchronised LED flash (software strobe)</title> - - <para> - Unsynchronised LED flash is controlled directly by the - host as the sensor. The flash must be enabled by the host - before the exposure of the image starts and disabled once - it ends. The host is fully responsible for the timing of - the flash. - </para> - - <para>Example of such device: Nokia N900.</para> - </section> - - <section> - <title>Synchronised LED flash (hardware strobe)</title> - - <para> - The synchronised LED flash is pre-programmed by the host - (power and timeout) but controlled by the sensor through a - strobe signal from the sensor to the flash. - </para> - - <para> - The sensor controls the flash duration and timing. This - information typically must be made available to the - sensor. - </para> - - </section> - - <section> - <title>LED flash as torch</title> - - <para> - LED flash may be used as torch in conjunction with another - use case involving camera or individually. - </para> - - - <table pgwide="1" frame="none" id="flash-control-id"> - <title>Flash Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry> - <entry>class</entry> - </row> - <row> - <entry spanname="descr">The FLASH class descriptor.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry> - <entry>menu</entry> - </row> - <row id="v4l2-flash-led-mode"> - <entry spanname="descr">Defines the mode of the flash LED, - the high-power white LED attached to the flash controller. - Setting this control may not be possible in presence of - some faults. See V4L2_CID_FLASH_FAULT.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry> - <entry>Off.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry> - <entry>Flash mode.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry> - <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry> - <entry>menu</entry> - </row> - <row id="v4l2-flash-strobe-source"><entry - spanname="descr">Defines the source of the flash LED - strobe.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry> - <entry>The flash strobe is triggered by using - the V4L2_CID_FLASH_STROBE control.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry> - <entry>The flash strobe is triggered by an - external source. Typically this is a sensor, - which makes it possible to synchronises the - flash strobe start to exposure start.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry> - <entry>button</entry> - </row> - <row> - <entry spanname="descr">Strobe flash. Valid when - V4L2_CID_FLASH_LED_MODE is set to - V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE - is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this - control may not be possible in presence of some faults. - See V4L2_CID_FLASH_FAULT.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry> - <entry>button</entry> - </row> - <row><entry spanname="descr">Stop flash strobe immediately.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Strobe status: whether the flash - is strobing at the moment or not. This is a read-only - control.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Hardware timeout for flash. The - flash strobe is stopped after this period of time has - passed from the start of the strobe.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Intensity of the flash strobe when - the flash LED is in flash mode - (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps - (mA) if possible.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Intensity of the flash LED in - torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be - milliamps (mA) if possible. Setting this control may not - be possible in presence of some faults. See - V4L2_CID_FLASH_FAULT.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Intensity of the indicator LED. - The indicator LED may be fully independent of the flash - LED. The unit should be microamps (uA) if possible.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">Faults related to the flash. The - faults tell about specific problems in the flash chip - itself or the LEDs attached to it. Faults may prevent - further use of some of the flash controls. In particular, - V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE - if the fault affects the flash LED. Exactly which faults - have such an effect is chip dependent. Reading the faults - resets the control and returns the chip to a usable state - if possible.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry> - <entry>Flash controller voltage to the flash LED - has exceeded the limit specific to the flash - controller.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry> - <entry>The flash strobe was still on when - the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. - Not all flash controllers may set this in all - such conditions.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry> - <entry>The flash controller has overheated.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry> - <entry>The short circuit protection of the flash - controller has been triggered.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry> - <entry>Current in the LED power supply has exceeded the limit - specific to the flash controller.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry> - <entry>The flash controller has detected a short or open - circuit condition on the indicator LED.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_UNDER_VOLTAGE</constant></entry> - <entry>Flash controller voltage to the flash LED - has been below the minimum limit specific to the flash - controller.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_INPUT_VOLTAGE</constant></entry> - <entry>The input voltage of the flash controller is below - the limit under which strobing the flash at full current - will not be possible.The condition persists until this flag - is no longer set.</entry> - </row> - <row> - <entry><constant>V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE</constant></entry> - <entry>The temperature of the LED has exceeded its - allowed upper limit.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">Enable or disable charging of the xenon - flash capacitor.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Is the flash ready to strobe? - Xenon flashes require their capacitors charged before - strobing. LED flashes often require a cooldown period - after strobe during which another strobe will not be - possible. This is a read-only control.</entry> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - </section> - </section> - </section> - - <section id="jpeg-controls"> - <title>JPEG Control Reference</title> - <para>The JPEG class includes controls for common features of JPEG - encoders and decoders. Currently it includes features for codecs - implementing progressive baseline DCT compression process with - Huffman entrophy coding.</para> - <table pgwide="1" frame="none" id="jpeg-control-id"> - <title>JPEG Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_JPEG_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The JPEG class descriptor. Calling - &VIDIOC-QUERYCTRL; for this control will return a description of this - control class. - - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant></entry> - <entry>menu</entry> - </row> - <row id="v4l2-jpeg-chroma-subsampling"> - <entry spanname="descr">The chroma subsampling factors describe how - each component of an input image is sampled, in respect to maximum - sample rate in each spatial dimension. See <xref linkend="itu-t81"/>, - clause A.1.1. for more details. The <constant> - V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant> control determines how - Cb and Cr components are downsampled after coverting an input image - from RGB to Y'CbCr color space. - </entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_444</constant> - </entry><entry>No chroma subsampling, each pixel has - Y, Cr and Cb values.</entry> - </row> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_422</constant> - </entry><entry>Horizontally subsample Cr, Cb components - by a factor of 2.</entry> - </row> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_420</constant> - </entry><entry>Subsample Cr, Cb components horizontally - and vertically by 2.</entry> - </row> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_411</constant> - </entry><entry>Horizontally subsample Cr, Cb components - by a factor of 4.</entry> - </row> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_410</constant> - </entry><entry>Subsample Cr, Cb components horizontally - by 4 and vertically by 2.</entry> - </row> - <row> - <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY</constant> - </entry><entry>Use only luminance component.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_JPEG_RESTART_INTERVAL</constant> - </entry><entry>integer</entry> - </row> - <row><entry spanname="descr"> - The restart interval determines an interval of inserting RSTm - markers (m = 0..7). The purpose of these markers is to additionally - reinitialize the encoder process, in order to process blocks of - an image independently. - For the lossy compression processes the restart interval unit is - MCU (Minimum Coded Unit) and its value is contained in DRI - (Define Restart Interval) marker. If <constant> - V4L2_CID_JPEG_RESTART_INTERVAL</constant> control is set to 0, - DRI and RSTm markers will not be inserted. - </entry> - </row> - <row id="jpeg-quality-control"> - <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESSION_QUALITY</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr"> - <constant>V4L2_CID_JPEG_COMPRESSION_QUALITY</constant> control - determines trade-off between image quality and size. - It provides simpler method for applications to control image quality, - without a need for direct reconfiguration of luminance and chrominance - quantization tables. - - In cases where a driver uses quantization tables configured directly - by an application, using interfaces defined elsewhere, <constant> - V4L2_CID_JPEG_COMPRESSION_QUALITY</constant> control should be set - by driver to 0. - - <para>The value range of this control is driver-specific. Only - positive, non-zero values are meaningful. The recommended range - is 1 - 100, where larger values correspond to better image quality. - </para> - </entry> - </row> - <row id="jpeg-active-marker-control"> - <entry spanname="id"><constant>V4L2_CID_JPEG_ACTIVE_MARKER</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">Specify which JPEG markers are included - in compressed stream. This control is valid only for encoders. - </entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP0</constant></entry> - <entry>Application data segment APP<subscript>0</subscript>.</entry> - </row><row> - <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP1</constant></entry> - <entry>Application data segment APP<subscript>1</subscript>.</entry> - </row><row> - <entry><constant>V4L2_JPEG_ACTIVE_MARKER_COM</constant></entry> - <entry>Comment segment.</entry> - </row><row> - <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DQT</constant></entry> - <entry>Quantization tables segment.</entry> - </row><row> - <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DHT</constant></entry> - <entry>Huffman tables segment.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - <para>For more details about JPEG specification, refer - to <xref linkend="itu-t81"/>, <xref linkend="jfif"/>, - <xref linkend="w3c-jpeg-jfif"/>.</para> - </section> - - <section id="image-source-controls"> - <title>Image Source Control Reference</title> - - <para> - The Image Source control class is intended for low-level - control of image source devices such as image sensors. The - devices feature an analogue to digital converter and a bus - transmitter to transmit the image data out of the device. - </para> - - <table pgwide="1" frame="none" id="image-source-control-id"> - <title>Image Source Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant></entry> - <entry>class</entry> - </row> - <row> - <entry spanname="descr">The IMAGE_SOURCE class descriptor.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_VBLANK</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Vertical blanking. The idle period - after every frame during which no image data is produced. - The unit of vertical blanking is a line. Every line has - length of the image width plus horizontal blanking at the - pixel rate defined by - <constant>V4L2_CID_PIXEL_RATE</constant> control in the - same sub-device.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_HBLANK</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Horizontal blanking. The idle - period after every line of image data during which no - image data is produced. The unit of horizontal blanking is - pixels.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_ANALOGUE_GAIN</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Analogue gain is gain affecting - all colour components in the pixel matrix. The gain - operation is performed in the analogue domain before A/D - conversion. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_RED</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Test pattern red colour component. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_GREENR</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Test pattern green (next to red) - colour component. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_BLUE</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Test pattern blue colour component. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_GREENB</constant></entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Test pattern green (next to blue) - colour component. - </entry> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - - </section> - - <section id="image-process-controls"> - <title>Image Process Control Reference</title> - - <para> - The Image Process control class is intended for low-level control of - image processing functions. Unlike - <constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant>, the controls in - this class affect processing the image, and do not control capturing - of it. - </para> - - <table pgwide="1" frame="none" id="image-process-control-id"> - <title>Image Process Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_IMAGE_PROC_CLASS</constant></entry> - <entry>class</entry> - </row> - <row> - <entry spanname="descr">The IMAGE_PROC class descriptor.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_LINK_FREQ</constant></entry> - <entry>integer menu</entry> - </row> - <row> - <entry spanname="descr">Data bus frequency. Together with the - media bus pixel code, bus type (clock cycles per sample), the - data bus frequency defines the pixel rate - (<constant>V4L2_CID_PIXEL_RATE</constant>) in the - pixel array (or possibly elsewhere, if the device is not an - image sensor). The frame rate can be calculated from the pixel - clock, image width and height and horizontal and vertical - blanking. While the pixel rate control may be defined elsewhere - than in the subdev containing the pixel array, the frame rate - cannot be obtained from that information. This is because only - on the pixel array it can be assumed that the vertical and - horizontal blanking information is exact: no other blanking is - allowed in the pixel array. The selection of frame rate is - performed by selecting the desired horizontal and vertical - blanking. The unit of this control is Hz. </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_PIXEL_RATE</constant></entry> - <entry>64-bit integer</entry> - </row> - <row> - <entry spanname="descr">Pixel rate in the source pads of - the subdev. This control is read-only and its unit is - pixels / second. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN</constant></entry> - <entry>menu</entry> - </row> - <row id="v4l2-test-pattern"> - <entry spanname="descr"> Some capture/display/sensor devices have - the capability to generate test pattern images. These hardware - specific test patterns can be used to test if a device is working - properly.</entry> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - - </section> - - <section id="dv-controls"> - <title>Digital Video Control Reference</title> - - <para> - The Digital Video control class is intended to control receivers - and transmitters for <ulink url="http://en.wikipedia.org/wiki/Vga">VGA</ulink>, - <ulink url="http://en.wikipedia.org/wiki/Digital_Visual_Interface">DVI</ulink> - (Digital Visual Interface), HDMI (<xref linkend="hdmi" />) and DisplayPort (<xref linkend="dp" />). - These controls are generally expected to be private to the receiver or transmitter - subdevice that implements them, so they are only exposed on the - <filename>/dev/v4l-subdev*</filename> device node. - </para> - - <para>Note that these devices can have multiple input or output pads which are - hooked up to e.g. HDMI connectors. Even though the subdevice will receive or - transmit video from/to only one of those pads, the other pads can still be - active when it comes to EDID (Extended Display Identification Data, - <xref linkend="vesaedid" />) and HDCP (High-bandwidth Digital Content - Protection System, <xref linkend="hdcp" />) processing, allowing the device - to do the fairly slow EDID/HDCP handling in advance. This allows for quick - switching between connectors.</para> - - <para>These pads appear in several of the controls in this section as - bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad 1, - etc. The maximum value of the control is the set of valid pads.</para> - - <table pgwide="1" frame="none" id="dv-control-id"> - <title>Digital Video Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_CLASS</constant></entry> - <entry>class</entry> - </row> - <row> - <entry spanname="descr">The Digital Video class descriptor.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_HOTPLUG</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">Many connectors have a hotplug pin which is high - if EDID information is available from the source. This control shows the - state of the hotplug pin as seen by the transmitter. - Each bit corresponds to an output pad on the transmitter. If an output pad - does not have an associated hotplug pin, then the bit for that pad will be 0. - This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_RXSENSE</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">Rx Sense is the detection of pull-ups on the TMDS - clock lines. This normally means that the sink has left/entered standby (i.e. - the transmitter can sense that the receiver is ready to receive video). - Each bit corresponds to an output pad on the transmitter. If an output pad - does not have an associated Rx Sense, then the bit for that pad will be 0. - This read-only control is applicable to DVI-D and HDMI devices. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_EDID_PRESENT</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">When the transmitter sees the hotplug signal from the - receiver it will attempt to read the EDID. If set, then the transmitter has read - at least the first block (= 128 bytes). - Each bit corresponds to an output pad on the transmitter. If an output pad - does not support EDIDs, then the bit for that pad will be 0. - This read-only control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_MODE</constant></entry> - <entry id="v4l2-dv-tx-mode">enum v4l2_dv_tx_mode</entry> - </row> - <row> - <entry spanname="descr">HDMI transmitters can transmit in DVI-D mode (just video) - or in HDMI mode (video + audio + auxiliary data). This control selects which mode - to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. - This control is applicable to HDMI connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_RGB_RANGE</constant></entry> - <entry id="v4l2-dv-rgb-range">enum v4l2_dv_rgb_range</entry> - </row> - <row> - <entry spanname="descr">Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO - follows the RGB quantization range specified in the standard for the video interface - (ie. <xref linkend="cea861" /> for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard - to be compatible with sinks that have not implemented the standard correctly - (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be - used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) - where N is the number of bits per component. - This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_TX_IT_CONTENT_TYPE</constant></entry> - <entry id="v4l2-dv-content-type">enum v4l2_dv_it_content_type</entry> - </row> - <row><entry spanname="descr">Configures the IT Content Type - of the transmitted video. This information is sent over HDMI and DisplayPort connectors - as part of the AVI InfoFrame. The term 'IT Content' is used for content that originates - from a computer as opposed to content from a TV broadcast or an analog source. The - enum v4l2_dv_it_content_type defines the possible content types:</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_DV_IT_CONTENT_TYPE_GRAPHICS</constant> </entry> - <entry>Graphics content. Pixel data should be passed unfiltered and without - analog reconstruction.</entry> - </row> - <row> - <entry><constant>V4L2_DV_IT_CONTENT_TYPE_PHOTO</constant> </entry> - <entry>Photo content. The content is derived from digital still pictures. - The content should be passed through with minimal scaling and picture - enhancements.</entry> - </row> - <row> - <entry><constant>V4L2_DV_IT_CONTENT_TYPE_CINEMA</constant> </entry> - <entry>Cinema content.</entry> - </row> - <row> - <entry><constant>V4L2_DV_IT_CONTENT_TYPE_GAME</constant> </entry> - <entry>Game content. Audio and video latency should be minimized.</entry> - </row> - <row> - <entry><constant>V4L2_DV_IT_CONTENT_TYPE_NO_ITC</constant> </entry> - <entry>No IT Content information is available and the ITC bit in the AVI - InfoFrame is set to 0.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_RX_POWER_PRESENT</constant></entry> - <entry>bitmask</entry> - </row> - <row> - <entry spanname="descr">Detects whether the receiver receives power from the source - (e.g. HDMI carries 5V on one of the pins). This is often used to power an eeprom - which contains EDID information, such that the source can read the EDID even if - the sink is in standby/power off. - Each bit corresponds to an input pad on the transmitter. If an input pad - cannot detect whether power is present, then the bit for that pad will be 0. - This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_RX_RGB_RANGE</constant></entry> - <entry>enum v4l2_dv_rgb_range</entry> - </row> - <row> - <entry spanname="descr">Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO - follows the RGB quantization range specified in the standard for the video interface - (ie. <xref linkend="cea861" /> for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard - to be compatible with sources that have not implemented the standard correctly - (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be - used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) - where N is the number of bits per component. - This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. - </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DV_RX_IT_CONTENT_TYPE</constant></entry> - <entry>enum v4l2_dv_it_content_type</entry> - </row> - <row><entry spanname="descr">Reads the IT Content Type - of the received video. This information is sent over HDMI and DisplayPort connectors - as part of the AVI InfoFrame. The term 'IT Content' is used for content that originates - from a computer as opposed to content from a TV broadcast or an analog source. See - <constant>V4L2_CID_DV_TX_IT_CONTENT_TYPE</constant> for the available content types.</entry> - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - - </section> - - <section id="fm-rx-controls"> - <title>FM Receiver Control Reference</title> - - <para>The FM Receiver (FM_RX) class includes controls for common features of - FM Reception capable devices.</para> - - <table pgwide="1" frame="none" id="fm-rx-control-id"> - <title>FM_RX Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_FM_RX_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The FM_RX class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RECEPTION</constant> </entry> - <entry>boolean</entry> - </row><row><entry spanname="descr">Enables/disables RDS - reception by the radio tuner</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_PTY</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Gets RDS Programme Type field. -This encodes up to 31 pre-defined programme types.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_PS_NAME</constant> </entry> - <entry>string</entry> - </row> - <row><entry spanname="descr">Gets the Programme Service name (PS_NAME). -It is intended for static display on a receiver. It is the primary aid to listeners in programme service -identification and selection. In Annex E of <xref linkend="iec62106" />, the RDS specification, -there is a full description of the correct character encoding for Programme Service name strings. -Also from RDS specification, PS is usually a single eight character text. However, it is also possible -to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured -with steps of 8 characters. The result is it must always contain a string with size multiple of 8.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_RADIO_TEXT</constant> </entry> - <entry>string</entry> - </row> - <row><entry spanname="descr">Gets the Radio Text info. It is a textual description of -what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, -programme-related information or any other text. In these cases, RadioText can be used in addition to -<constant>V4L2_CID_RDS_RX_PS_NAME</constant>. The encoding for Radio Text strings is also fully described -in Annex E of <xref linkend="iec62106" />. The length of Radio Text strings depends on which RDS Block is being -used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible -to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured -with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. </entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then a traffic announcement is in progress.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_TRAFFIC_PROGRAM</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then the tuned programme carries traffic announcements.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RDS_RX_MUSIC_SPEECH</constant> </entry> - <entry>boolean</entry> - </row> - <row><entry spanname="descr">If set, then this channel broadcasts music. If cleared, then it -broadcasts speech. If the transmitter doesn't make this distinction, then it will be set.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_TUNE_DEEMPHASIS</constant> </entry> - <entry>enum v4l2_deemphasis</entry> - </row> - <row id="v4l2-deemphasis"><entry spanname="descr">Configures the de-emphasis value for reception. -A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. -Depending on the region, a time constant of either 50 or 75 useconds is used. The enum v4l2_deemphasis -defines possible values for de-emphasis. Here they are:</entry> - </row><row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_DEEMPHASIS_DISABLED</constant> </entry> - <entry>No de-emphasis is applied.</entry> - </row> - <row> - <entry><constant>V4L2_DEEMPHASIS_50_uS</constant> </entry> - <entry>A de-emphasis of 50 uS is used.</entry> - </row> - <row> - <entry><constant>V4L2_DEEMPHASIS_75_uS</constant> </entry> - <entry>A de-emphasis of 75 uS is used.</entry> - </row> - </tbody> - </entrytbl> - - </row> - <row><entry></entry></row> - </tbody> - </tgroup> - </table> - </section> - - <section id="detect-controls"> - <title>Detect Control Reference</title> - - <para>The Detect class includes controls for common features of - various motion or object detection capable devices.</para> - - <table pgwide="1" frame="none" id="detect-control-id"> - <title>Detect Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_DETECT_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The Detect class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DETECT_MD_MODE</constant> </entry> - <entry>menu</entry> - </row><row><entry spanname="descr">Sets the motion detection mode.</entry> - </row> - <row> - <entrytbl spanname="descr" cols="2"> - <tbody valign="top"> - <row> - <entry><constant>V4L2_DETECT_MD_MODE_DISABLED</constant> - </entry><entry>Disable motion detection.</entry> - </row> - <row> - <entry><constant>V4L2_DETECT_MD_MODE_GLOBAL</constant> - </entry><entry>Use a single motion detection threshold.</entry> - </row> - <row> - <entry><constant>V4L2_DETECT_MD_MODE_THRESHOLD_GRID</constant> - </entry><entry>The image is divided into a grid, each cell with its own - motion detection threshold. These thresholds are set through the - <constant>V4L2_CID_DETECT_MD_THRESHOLD_GRID</constant> matrix control.</entry> - </row> - <row> - <entry><constant>V4L2_DETECT_MD_MODE_REGION_GRID</constant> - </entry><entry>The image is divided into a grid, each cell with its own - region value that specifies which per-region motion detection thresholds - should be used. Each region has its own thresholds. How these per-region - thresholds are set up is driver-specific. The region values for the grid are set - through the <constant>V4L2_CID_DETECT_MD_REGION_GRID</constant> matrix - control.</entry> - </row> - </tbody> - </entrytbl> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD</constant> </entry> - <entry>integer</entry> - </row> - <row><entry spanname="descr">Sets the global motion detection threshold to be - used with the <constant>V4L2_DETECT_MD_MODE_GLOBAL</constant> motion detection mode.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DETECT_MD_THRESHOLD_GRID</constant> </entry> - <entry>__u16 matrix</entry> - </row> - <row><entry spanname="descr">Sets the motion detection thresholds for each cell in the grid. - To be used with the <constant>V4L2_DETECT_MD_MODE_THRESHOLD_GRID</constant> - motion detection mode. Matrix element (0, 0) represents the cell at the top-left of the - grid.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_DETECT_MD_REGION_GRID</constant> </entry> - <entry>__u8 matrix</entry> - </row> - <row><entry spanname="descr">Sets the motion detection region value for each cell in the grid. - To be used with the <constant>V4L2_DETECT_MD_MODE_REGION_GRID</constant> - motion detection mode. Matrix element (0, 0) represents the cell at the top-left of the - grid.</entry> - </row> - </tbody> - </tgroup> - </table> - - </section> - - <section id="rf-tuner-controls"> - <title>RF Tuner Control Reference</title> - - <para> -The RF Tuner (RF_TUNER) class includes controls for common features of devices -having RF tuner. - </para> - <para> -In this context, RF tuner is radio receiver circuit between antenna and -demodulator. It receives radio frequency (RF) from the antenna and converts that -received signal to lower intermediate frequency (IF) or baseband frequency (BB). -Tuners that could do baseband output are often called Zero-IF tuners. Older -tuners were typically simple PLL tuners inside a metal box, whilst newer ones -are highly integrated chips without a metal box "silicon tuners". These controls -are mostly applicable for new feature rich silicon tuners, just because older -tuners does not have much adjustable features. - </para> - <para> -For more information about RF tuners see -<ulink url="http://en.wikipedia.org/wiki/Tuner_%28radio%29">Tuner (radio)</ulink> -and -<ulink url="http://en.wikipedia.org/wiki/RF_front_end">RF front end</ulink> -from Wikipedia. - </para> - - <table pgwide="1" frame="none" id="rf-tuner-control-id"> - <title>RF_TUNER Control IDs</title> - - <tgroup cols="4"> - <colspec colname="c1" colwidth="1*" /> - <colspec colname="c2" colwidth="6*" /> - <colspec colname="c3" colwidth="2*" /> - <colspec colname="c4" colwidth="6*" /> - <spanspec namest="c1" nameend="c2" spanname="id" /> - <spanspec namest="c2" nameend="c4" spanname="descr" /> - <thead> - <row> - <entry spanname="id" align="left">ID</entry> - <entry align="left">Type</entry> - </row> - <row rowsep="1"> - <entry spanname="descr" align="left">Description</entry> - </row> - </thead> - <tbody valign="top"> - <row><entry></entry></row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_CLASS</constant> </entry> - <entry>class</entry> - </row><row><entry spanname="descr">The RF_TUNER class -descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a -description of this control class.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_BANDWIDTH_AUTO</constant> </entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables/disables tuner radio channel -bandwidth configuration. In automatic mode bandwidth configuration is performed -by the driver.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_BANDWIDTH</constant> </entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Filter(s) on tuner signal path are used to -filter signal according to receiving party needs. Driver configures filters to -fulfill desired bandwidth requirement. Used when V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not -set. Unit is in Hz. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_LNA_GAIN_AUTO</constant> </entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables/disables LNA automatic gain control (AGC)</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO</constant> </entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables/disables mixer automatic gain control (AGC)</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_IF_GAIN_AUTO</constant> </entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Enables/disables IF automatic gain control (AGC)</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_RF_GAIN</constant> </entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">The RF amplifier is the very first -amplifier on the receiver signal path, just right after the antenna input. -The difference between the LNA gain and the RF gain in this document is that -the LNA gain is integrated in the tuner chip while the RF gain is a separate -chip. There may be both RF and LNA gain controls in the same device. -The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_LNA_GAIN</constant> </entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">LNA (low noise amplifier) gain is first -gain stage on the RF tuner signal path. It is located very close to tuner -antenna input. Used when <constant>V4L2_CID_RF_TUNER_LNA_GAIN_AUTO</constant> is not set. -See <constant>V4L2_CID_RF_TUNER_RF_GAIN</constant> to understand how RF gain -and LNA gain differs from the each others. -The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_MIXER_GAIN</constant> </entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">Mixer gain is second gain stage on the RF -tuner signal path. It is located inside mixer block, where RF signal is -down-converted by the mixer. Used when <constant>V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO</constant> -is not set. The range and step are driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_IF_GAIN</constant> </entry> - <entry>integer</entry> - </row> - <row> - <entry spanname="descr">IF gain is last gain stage on the RF tuner -signal path. It is located on output of RF tuner. It controls signal level of -intermediate frequency output or baseband output. Used when -<constant>V4L2_CID_RF_TUNER_IF_GAIN_AUTO</constant> is not set. The range and step are -driver-specific.</entry> - </row> - <row> - <entry spanname="id"><constant>V4L2_CID_RF_TUNER_PLL_LOCK</constant> </entry> - <entry>boolean</entry> - </row> - <row> - <entry spanname="descr">Is synthesizer PLL locked? RF tuner is -receiving given frequency when that control is set. This is a read-only control. -</entry> - </row> - </tbody> - </tgroup> - </table> - </section> -</section> |