coresight: etb10: splitting sysFS "status" entry

The sysFS "status" entry conveys a wealth of information about
the status of the HW but goes agains the sysFS rule of one topic
per file.

This patch rectify the situation by adding read-only entries for
each of the field formaly displayed by "status".  The ABI
documentation is kept up to date.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 62 insertions, 7 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
index 4b8d6ec92e2b..b5f526081711 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
@@ -6,13 +6,6 @@ Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
 		source for a single sink.
 		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
 
-What:		/sys/bus/coresight/devices/<memory_map>.etb/status
-Date:		November 2014
-KernelVersion:	3.19
-Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) List various control and status registers.  The specific
-		layout and content is driver specific.
-
 What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
 Date:		November 2014
 KernelVersion:	3.19
@@ -22,3 +15,65 @@ Description:	(RW) Disables write access to the Trace RAM by stopping the
 		following the trigger event. The number of 32-bit words written
 		into the Trace RAM following the trigger event is equal to the
 		value stored in this register+1 (from ARM ETB-TRM).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Defines the depth, in words, of the trace RAM in powers of
+		2.  The value is read directly from HW register RDP, 0x004.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB status register.  The value
+		is read directly from HW register STS, 0x00C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB RAM Read Pointer register
+		that is used to read entries from the Trace RAM over the APB
+		interface.  The value is read directly from HW register RRP,
+		0x014.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB RAM Write Pointer register
+		that is used to sets the write pointer to write entries from
+		the CoreSight bus into the Trace RAM. The value is read directly
+		from HW register RWP, 0x018.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Similar to "trigger_cntr" above except that this value is
+		read directly from HW register TRG, 0x01C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Control register. The value
+		is read directly from HW register CTL, 0x020.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Status
+		register.  The value is read directly from HW register FFSR,
+		0x300.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Control
+		register.  The value is read directly from HW register FFCR,
+		0x304.