Merge branch 'master' into upstream.

This is sync with Linus' tree to receive KEY_IMAGES definition
that went in through input tree.

19 files changed, 176 insertions, 40 deletions

diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight
index 4d637e1c4ff7..70302f370e7e 100644
--- a/Documentation/ABI/stable/sysfs-class-backlight
+++ b/Documentation/ABI/stable/sysfs-class-backlight
@@ -34,3 +34,23 @@ Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Maximum brightness for <backlight>.
 Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/type
+Date:		September 2010
+KernelVersion:	2.6.37
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The type of interface controlled by <backlight>.
+		"firmware": The driver uses a standard firmware interface
+		"platform": The driver uses a platform-specific interface
+		"raw": The driver controls hardware registers directly
+
+		In the general case, when multiple backlight
+		interfaces are available for a single device, firmware
+		control should be preferred to platform control should
+		be preferred to raw control. Using a firmware
+		interface reduces the probability of confusion with
+		the hardware and the OS independently updating the
+		backlight state. Platform interfaces are mostly a
+		holdover from pre-standardisation of firmware
+		interfaces.
diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 000000000000..875988146a63
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,31 @@
+What:		/config/pcie-gadget
+Date:		Feb 2011
+KernelVersion:	2.6.37
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+
+	Interface is used to configure selected dual mode PCIe controller
+	as device and then program its various registers to configure it
+	as a particular device type.
+	This interfaces can be used to show spear's PCIe device capability.
+
+	Nodes are only visible when configfs is mounted. To mount configfs
+	in /config directory use:
+	# mount -t configfs none /config/
+
+	For nth PCIe Device Controller
+	/config/pcie-gadget.n/
+		link ... used to enable ltssm and read its status.
+		int_type ...used to configure and read type of supported
+			interrupt
+		no_of_msi ... used to configure number of MSI vector needed and
+			to read no of MSI granted.
+		inta ... write 1 to assert INTA and 0 to de-assert.
+		send_msi ... write MSI vector to be sent.
+		vendor_id ... used to write and read vendor id (hex)
+		device_id ... used to write and read device id (hex)
+		bar0_size ... used to write and read bar0_size
+		bar0_address ... used to write and read bar0 mapped area in hex.
+		bar0_rw_offset ... used to write and read offset of bar0 where
+			bar0_data will be written or read.
+		bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore
index f1fb2a004264..ddf451ee2a08 100644
--- a/Documentation/ABI/testing/pstore
+++ b/Documentation/ABI/testing/pstore
@@ -1,6 +1,6 @@
 Where:		/dev/pstore/...
-Date:		January 2011
-Kernel Version: 2.6.38
+Date:		March 2011
+Kernel Version: 2.6.39
 Contact:	tony.luck@intel.com
 Description:	Generic interface to platform dependent persistent storage.
 
@@ -11,7 +11,7 @@ Description:	Generic interface to platform dependent persistent storage.
 		of the console log is captured, but other interesting
 		data can also be saved.
 
-		# mount -t pstore - /dev/pstore
+		# mount -t pstore -o kmsg_bytes=8000 - /dev/pstore
 
 		$ ls -l /dev/pstore
 		total 0
@@ -33,3 +33,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		will be saved elsewhere and erased from persistent store
 		soon after boot to free up space ready for the next
 		catastrophe.
+
+		The 'kmsg_bytes' mount option changes the target amount of
+		data saved on each oops/panic. Pstore saves (possibly
+		multiple) files based on the record size of the underlying
+		persistent storage until at least this amount is reached.
+		Default is 10 Kbytes.
diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
index b585ec258a08..2979c40c10e9 100644
--- a/Documentation/ABI/testing/sysfs-bus-css
+++ b/Documentation/ABI/testing/sysfs-bus-css
@@ -29,7 +29,7 @@ Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
 		linux-s390@vger.kernel.org
 Description:	Contains the PIM/PAM/POM values, as reported by the
 		channel subsystem when last queried by the common I/O
-		layer (this implies that this attribute is not neccessarily
+		layer (this implies that this attribute is not necessarily
 		in sync with the values current in the channel subsystem).
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
diff --git a/Documentation/ABI/testing/sysfs-bus-media b/Documentation/ABI/testing/sysfs-bus-media
new file mode 100644
index 000000000000..7057e574154a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-media
@@ -0,0 +1,6 @@
+What:		/sys/bus/media/devices/.../model
+Date:		January 2011
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+		linux-media@vger.kernel.org
+Description:	Contains the device model name in UTF-8. The device version is
+		is not be appended to the model name.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index 4f29e5f1ebfa..f5bb0a3bb8c0 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -59,3 +59,15 @@ Kernel Version: 2.6.31
 Contact:	iss_storagedev@hp.com
 Description:	Displays the usage count (number of opens) of logical drive Y
 		of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/resettable
+Date:		February 2011
+Kernel Version:	2.6.38
+Contact:	iss_storagedev@hp.com
+Description:	Value of 1 indicates the controller can honor the reset_devices
+		kernel parameter.  Value of 0 indicates reset_devices cannot be
+		honored.  This is to allow, for example, kexec tools to be able
+		to warn the user if they designate an unresettable device as
+		a dump device, as kdump requires resetting the device in order
+		to work reliably.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index 90a87e2a572b..fa72ccb2282e 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -1,6 +1,6 @@
 What:		/sys/bus/rbd/
 Date:		November 2010
-Contact:	Yehuda Sadeh <yehuda@hq.newdream.net>,
+Contact:	Yehuda Sadeh <yehuda@newdream.net>,
 		Sage Weil <sage@newdream.net>
 Description:
 
diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index edff6630c805..3646ec85d513 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -33,5 +33,5 @@ Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Invert the LED on/off state. This parameter is specific to
 		gpio and backlight triggers. In case of the backlight trigger,
-		it is usefull when driving a LED which is intended to indicate
+		it is useful when driving a LED which is intended to indicate
 		a device in a standby like state.
diff --git a/Documentation/ABI/testing/sysfs-devices-mmc b/Documentation/ABI/testing/sysfs-devices-mmc
new file mode 100644
index 000000000000..5a50ab655843
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-mmc
@@ -0,0 +1,21 @@
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_offset
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the start address of
+		enhanced data area. If not, this attribute will be -EINVAL.
+		Unit Byte. Format decimal.
+
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_size
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the size of enhanced
+		data area. If not, this attribute will be -EINVAL.
+		Unit KByte. Format decimal.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index b4c4f158ab9c..3ca3971109bf 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -40,7 +40,7 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
-                press of a button. A profile holds informations like button
+                press of a button. A profile holds information like button
                 mappings, sensitivity, the colors of the 5 leds and light
                 effects.
                 When read, these files return the respective profile. The
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index e5311a084a31..c1b53b8bc2ae 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -36,7 +36,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 77 bytes long.
 		The mouse will reject invalid data.
@@ -50,7 +50,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 77 bytes in size.
 		This file is readonly.
@@ -61,7 +61,7 @@ Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 43 bytes long.
@@ -76,7 +76,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 43 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index fdfa16f8189b..20f937c9d84f 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -52,7 +52,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 23 bytes long.
 		The mouse will reject invalid data.
@@ -66,7 +66,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 23 bytes in size.
 		This file is readonly.
@@ -77,7 +77,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 16 bytes long.
@@ -92,7 +92,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 16 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 5fab71af3c46..3f8de50e4ff1 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -39,7 +39,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 13 bytes long.
@@ -54,7 +54,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 13 bytes in size.
@@ -66,7 +66,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 19 bytes long.
 		The mouse will reject invalid data.
@@ -80,7 +80,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 19 bytes in size.
 		This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/Documentation/ABI/testing/sysfs-driver-samsung-laptop
new file mode 100644
index 000000000000..0a810231aad4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-samsung-laptop
@@ -0,0 +1,19 @@
+What:		/sys/devices/platform/samsung/performance_level
+Date:		January 1, 2010
+KernelVersion:	2.6.33
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:	Some Samsung laptops have different "performance levels"
+		that are can be modified by a function key, and by this
+		sysfs file.  These values don't always make a whole lot
+		of sense, but some users like to modify them to keep
+		their fans quiet at all costs.  Reading from this file
+		will show the current performance level.  Writing to the
+		file can change this value.
+			Valid options:
+				"silent"
+				"normal"
+				"overclock"
+		Note that not all laptops support all of these options.
+		Specifically, not all support the "overclock" option,
+		and it's still unknown if this value even changes
+		anything, other than making the user feel a bit better.
diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4
index 5fb709997d96..f22ac0872ae8 100644
--- a/Documentation/ABI/testing/sysfs-fs-ext4
+++ b/Documentation/ABI/testing/sysfs-fs-ext4
@@ -48,7 +48,7 @@ Description:
 		 will have its blocks allocated out of its own unique
 		 preallocation pool.
 
-What:		/sys/fs/ext4/<disk>/inode_readahead
+What:		/sys/fs/ext4/<disk>/inode_readahead_blks
 Date:		March 2008
 Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
@@ -85,7 +85,14 @@ Date:		June 2008
 Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
 		Tuning parameter which (if non-zero) controls the goal
-		inode used by the inode allocator in p0reference to
-		all other allocation hueristics.  This is intended for
+		inode used by the inode allocator in preference to
+		all other allocation heuristics.  This is intended for
 		debugging use only, and should be 0 on production
 		systems.
+
+What:		/sys/fs/ext4/<disk>/max_writeback_mb_bump
+Date:		September 2009
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of megabytes the writeback code will
+		try to write out before move on to another inode.
diff --git a/Documentation/ABI/testing/sysfs-fs-pstore b/Documentation/ABI/testing/sysfs-fs-pstore
deleted file mode 100644
index 8e659d854805..000000000000
--- a/Documentation/ABI/testing/sysfs-fs-pstore
+++ /dev/null
@@ -1,7 +0,0 @@
-What:		/sys/fs/pstore/kmsg_bytes
-Date:		January 2011
-Kernel Version: 2.6.38
-Contact:	"Tony Luck" <tony.luck@intel.com>
-Description:
-		Controls amount of console log that will be saved
-		to persistent store on oops/panic.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 41ff8ae4dee0..cd9d667c3da2 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -27,7 +27,7 @@ KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Some models like the W1N have a LED display that can be
-		used to display several informations.
+		used to display several items of information.
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
new file mode 100644
index 000000000000..2e7df91620de
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -0,0 +1,31 @@
+What:		/sys/devices/platform/<platform>/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+
+What:		/sys/devices/platform/<platform>/camera
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/cardr
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/touchpad
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card touchpad. 1 means on, 0 means off.
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
deleted file mode 100644
index e4b5fef5fadd..000000000000
--- a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
+++ /dev/null
@@ -1,10 +0,0 @@
-What:		/sys/devices/platform/eeepc-wmi/cpufv
-Date:		Oct 2010
-KernelVersion:	2.6.37
-Contact:	"Corentin Chary" <corentincj@iksaif.net>
-Description:
-		Change CPU clock configuration (write-only).
-		There are three available clock configuration:
-		    * 0 -> Super Performance Mode
-		    * 1 -> High Performance Mode
-		    * 2 -> Power Saving Mode