diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-04 14:47:47 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-04 14:47:47 -0700 |
| commit | e8547112910540afb71589ee807ae6a4259f9755 (patch) | |
| tree | 7d3d7eb17be4e6d2b181bffc4d471e93063674b4 | |
| parent | 9ce32ac8f83729aca9f45ce9598dbc5451d1044b (diff) | |
| parent | ffe3744a591fdce695da6b891378261e2caedc69 (diff) | |
| download | linux-e8547112910540afb71589ee807ae6a4259f9755.tar.bz2 | |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"New SoC specific drivers:
- NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
based on the "BPMP" firmware
- Clocksource and system controller drivers for the newly added
Action Semi platforms (both arm and arm64).
Reset subsystem, merged through arm-soc by tradition:
- New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
SoCs
- Various subsystem-wide cleanups
Updates for existing SoC-specific drivers
- TI GPMC (General Purpose Memory Controller)
- Mediatek "scpsys" system controller support for MT6797
- Broadcom "brcmstb_gisb" bus arbitrer
- ARM SCPI firmware
- Renesas "SYSC" system controller
One more driver update was submitted for the Freescale/NXP DPAA data
path acceleration that has previously been used on PowerPC chips. I
ended up postponing the merge until some API questions for its unusual
MMIO access are resolved"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
clocksource: owl: Add S900 support
clocksource: Add Owl timer
soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
firmware: tegra: Fix locking bugs in BPMP
soc/tegra: flowctrl: Fix error handling
soc/tegra: bpmp: Implement generic PM domains
soc/tegra: bpmp: Update ABI header
PM / Domains: Allow overriding the ->xlate() callback
soc: brcmstb: enable drivers for ARM64 and BMIPS
soc: renesas: Rework Kconfig and Makefile logic
reset: Add the TI SCI reset driver
dt-bindings: reset: Add TI SCI reset binding
reset: use kref for reference counting
soc: qcom: smsm: Improve error handling, quiesce probe deferral
cpufreq: scpi: use new scpi_ops functions to remove duplicate code
firmware: arm_scpi: add support to populate OPPs and get transition latency
dt-bindings: reset: Add reset manager offsets for Stratix10
memory: omap-gpmc: add error message if bank-width property is absent
memory: omap-gpmc: make dts snippet include semicolon
reset: Add a Gemini reset controller
...
42 files changed, 2059 insertions, 198 deletions
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt index 1eceefb20f01..8a6c3c2e58fe 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt @@ -3,7 +3,8 @@ Broadcom GISB bus Arbiter controller Required properties: - compatible: - "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips + "brcm,bcm7278-gisb-arb" for V7 28nm chips + "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips "brcm,bcm7435-gisb-arb" for newer 40nm chips "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips "brcm,bcm7038-gisb-arb" for 130nm chips diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt new file mode 100644 index 000000000000..8b1cf022f18a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt @@ -0,0 +1,62 @@ +Texas Instruments System Control Interface (TI-SCI) Reset Controller +===================================================================== + +Some TI SoCs contain a system controller (like the Power Management Micro +Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling +the state of the various hardware modules present on the SoC. Communication +between the host processor running an OS and the system controller happens +through a protocol called TI System Control Interface (TI-SCI protocol). +For TI SCI details, please refer to the document, +Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +TI-SCI Reset Controller Node +============================ +This reset controller node uses the TI SCI protocol to perform the reset +management of various hardware modules present on the SoC. Must be a child +node of the associated TI-SCI system controller node. + +Required properties: +-------------------- + - compatible : Should be "ti,sci-reset" + - #reset-cells : Should be 2. Please see the reset consumer node below for + usage details. + +TI-SCI Reset Consumer Nodes +=========================== +Each of the reset consumer nodes should have the following properties, +in addition to their own properties. + +Required properties: +-------------------- + - resets : A phandle and reset specifier pair, one pair for each reset + signal that affects the device, or that the device manages. + The phandle should point to the TI-SCI reset controller node, + and the reset specifier should have 2 cell-values. The first + cell should contain the device ID. The second cell should + contain the reset mask value used by system controller. + Please refer to the protocol documentation for these values + to be used for different devices, + http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data + +Please also refer to Documentation/devicetree/bindings/reset/reset.txt for +common reset controller usage by consumers. + +Example: +-------- +The following example demonstrates both a TI-SCI reset controller node and a +consumer (a DSP device) on the 66AK2G SoC. + +pmmc: pmmc { + compatible = "ti,k2g-sci"; + + k2g_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; +}; + +dsp0: dsp@10800000 { + ... + resets = <&k2g_reset 0x0046 0x1>; + ... +}; diff --git a/MAINTAINERS b/MAINTAINERS index 08e5e8f800e3..f8d431a5cca1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12682,6 +12682,8 @@ F: include/linux/soc/ti/ti_sci_protocol.h F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt F: include/dt-bindings/genpd/k2g.h F: drivers/soc/ti/ti_sci_pm_domains.c +F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt +F: drivers/reset/reset-ti-sci.c THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index b8e4b966c74d..9649dce63e19 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -1637,9 +1637,6 @@ EXPORT_SYMBOL_GPL(pm_genpd_remove); #ifdef CONFIG_PM_GENERIC_DOMAINS_OF -typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args, - void *data); - /* * Device Tree based PM domain providers. * @@ -1795,6 +1792,9 @@ int of_genpd_add_provider_onecell(struct device_node *np, mutex_lock(&gpd_list_lock); + if (!data->xlate) + data->xlate = genpd_xlate_onecell; + for (i = 0; i < data->num_domains; i++) { if (!data->domains[i]) continue; @@ -1805,7 +1805,7 @@ int of_genpd_add_provider_onecell(struct device_node *np, data->domains[i]->has_provider = true; } - ret = genpd_add_provider(np, genpd_xlate_onecell, data); + ret = genpd_add_provider(np, data->xlate, data); if (ret < 0) goto error; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 0a52da439abf..d2a5f1184022 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -57,7 +57,7 @@ config ARM_CCN config BRCMSTB_GISB_ARB bool "Broadcom STB GISB bus arbiter" - depends on ARM || MIPS + depends on ARM || ARM64 || MIPS default ARCH_BRCMSTB || BMIPS_GENERIC help Driver for the Broadcom Set Top Box System-on-a-chip internal bus diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c index 72fe0a5a8bf3..68ac3e93b600 100644 --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -24,11 +24,9 @@ #include <linux/of.h> #include <linux/bitops.h> #include <linux/pm.h> - -#ifdef CONFIG_ARM -#include <asm/bug.h> -#include <asm/signal.h> -#endif +#include <linux/kernel.h> +#include <linux/kdebug.h> +#include <linux/notifier.h> #ifdef CONFIG_MIPS #include <asm/traps.h> @@ -37,8 +35,6 @@ #define ARB_ERR_CAP_CLEAR (1 << 0) #define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) #define ARB_ERR_CAP_STATUS_TEA (1 << 11) -#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2) -#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c #define ARB_ERR_CAP_STATUS_WRITE (1 << 1) #define ARB_ERR_CAP_STATUS_VALID (1 << 0) @@ -47,7 +43,6 @@ enum { ARB_ERR_CAP_CLR, ARB_ERR_CAP_HI_ADDR, ARB_ERR_CAP_ADDR, - ARB_ERR_CAP_DATA, ARB_ERR_CAP_STATUS, ARB_ERR_CAP_MASTER, }; @@ -57,17 +52,24 @@ static const int gisb_offsets_bcm7038[] = { [ARB_ERR_CAP_CLR] = 0x0c4, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0c8, - [ARB_ERR_CAP_DATA] = 0x0cc, [ARB_ERR_CAP_STATUS] = 0x0d0, [ARB_ERR_CAP_MASTER] = -1, }; +static const int gisb_offsets_bcm7278[] = { + [ARB_TIMER] = 0x008, + [ARB_ERR_CAP_CLR] = 0x7f8, + [ARB_ERR_CAP_HI_ADDR] = -1, + [ARB_ERR_CAP_ADDR] = 0x7e0, + [ARB_ERR_CAP_STATUS] = 0x7f0, + [ARB_ERR_CAP_MASTER] = 0x7f4, +}; + static const int gisb_offsets_bcm7400[] = { [ARB_TIMER] = 0x00c, [ARB_ERR_CAP_CLR] = 0x0c8, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0cc, - [ARB_ERR_CAP_DATA] = 0x0d0, [ARB_ERR_CAP_STATUS] = 0x0d4, [ARB_ERR_CAP_MASTER] = 0x0d8, }; @@ -77,7 +79,6 @@ static const int gisb_offsets_bcm7435[] = { [ARB_ERR_CAP_CLR] = 0x168, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x16c, - [ARB_ERR_CAP_DATA] = 0x170, [ARB_ERR_CAP_STATUS] = 0x174, [ARB_ERR_CAP_MASTER] = 0x178, }; @@ -87,7 +88,6 @@ static const int gisb_offsets_bcm7445[] = { [ARB_ERR_CAP_CLR] = 0x7e4, [ARB_ERR_CAP_HI_ADDR] = 0x7e8, [ARB_ERR_CAP_ADDR] = 0x7ec, - [ARB_ERR_CAP_DATA] = 0x7f0, [ARB_ERR_CAP_STATUS] = 0x7f4, [ARB_ERR_CAP_MASTER] = 0x7f8, }; @@ -109,9 +109,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg) { int offset = gdev->gisb_offsets[reg]; - /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ - if (offset == -1) - return 1; + if (offset < 0) { + /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ + if (reg == ARB_ERR_CAP_MASTER) + return 1; + else + return 0; + } if (gdev->big_endian) return ioread32be(gdev->base + offset); @@ -119,6 +123,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg) return ioread32(gdev->base + offset); } +static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev) +{ + u64 value; + + value = gisb_read(gdev, ARB_ERR_CAP_ADDR); + value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; + + return value; +} + static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg) { int offset = gdev->gisb_offsets[reg]; @@ -127,9 +141,9 @@ static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg) return; if (gdev->big_endian) - iowrite32be(val, gdev->base + reg); + iowrite32be(val, gdev->base + offset); else - iowrite32(val, gdev->base + reg); + iowrite32(val, gdev->base + offset); } static ssize_t gisb_arb_get_timeout(struct device *dev, @@ -185,7 +199,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev, const char *reason) { u32 cap_status; - unsigned long arb_addr; + u64 arb_addr; u32 master; const char *m_name; char m_fmt[11]; @@ -197,10 +211,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev, return 1; /* Read the address and master */ - arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff; -#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT)) - arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; -#endif + arb_addr = gisb_read_address(gdev); master = gisb_read(gdev, ARB_ERR_CAP_MASTER); m_name = brcmstb_gisb_master_to_str(gdev, master); @@ -209,7 +220,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev, m_name = m_fmt; } - pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n", + pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n", __func__, reason, arb_addr, cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R', cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "", @@ -221,27 +232,6 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev, return 0; } -#ifdef CONFIG_ARM -static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - int ret = 0; - struct brcmstb_gisb_arb_device *gdev; - - /* iterate over each GISB arb registered handlers */ - list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) - ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error"); - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return ret; -} -#endif - #ifdef CONFIG_MIPS static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup) { @@ -279,6 +269,36 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * Dump out gisb errors on die or panic. + */ +static int dump_gisb_error(struct notifier_block *self, unsigned long v, + void *p); + +static struct notifier_block gisb_die_notifier = { + .notifier_call = dump_gisb_error, +}; + +static struct notifier_block gisb_panic_notifier = { + .notifier_call = dump_gisb_error, +}; + +static int dump_gisb_error(struct notifier_block *self, unsigned long v, + void *p) +{ + struct brcmstb_gisb_arb_device *gdev; + const char *reason = "panic"; + + if (self == &gisb_die_notifier) + reason = "die"; + + /* iterate over each GISB arb registered handlers */ + list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) + brcmstb_gisb_arb_decode_addr(gdev, reason); + + return NOTIFY_DONE; +} + static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO, gisb_arb_get_timeout, gisb_arb_set_timeout); @@ -296,6 +316,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = { { .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 }, { .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 }, { .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 }, + { .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 }, { .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 }, { }, }; @@ -378,14 +399,16 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev) list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list); -#ifdef CONFIG_ARM - hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0, - "imprecise external abort"); -#endif #ifdef CONFIG_MIPS board_be_handler = brcmstb_bus_error_handler; #endif + if (list_is_singular(&brcmstb_gisb_arb_device_list)) { + register_die_notifier(&gisb_die_notifier); + atomic_notifier_chain_register(&panic_notifier_list, + &gisb_panic_notifier); + } + dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n", gdev->base, timeout_irq, tea_irq); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 88818a43d6e9..fcae5ca6ac92 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -103,6 +103,13 @@ config ORION_TIMER help Enables the support for the Orion timer driver +config OWL_TIMER + bool "Owl timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables the support for the Actions Semi Owl timer driver. + config SUN4I_TIMER bool "Sun4i timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 72bfd001cfbb..6df949402dfc 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o +obj-$(CONFIG_OWL_TIMER) += owl-timer.o obj-$(CONFIG_ARC_TIMERS) += arc_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o diff --git a/drivers/clocksource/owl-timer.c b/drivers/clocksource/owl-timer.c new file mode 100644 index 000000000000..d19c53c11094 --- /dev/null +++ b/drivers/clocksource/owl-timer.c @@ -0,0 +1,172 @@ +/* + * Actions Semi Owl timer + * + * Copyright 2012 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2017 SUSE Linux GmbH + * Author: Andreas Färber + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#define OWL_Tx_CTL 0x0 +#define OWL_Tx_CMP 0x4 +#define OWL_Tx_VAL 0x8 + +#define OWL_Tx_CTL_PD BIT(0) +#define OWL_Tx_CTL_INTEN BIT(1) +#define OWL_Tx_CTL_EN BIT(2) + +static void __iomem *owl_timer_base; +static void __iomem *owl_clksrc_base; +static void __iomem *owl_clkevt_base; + +static inline void owl_timer_reset(void __iomem *base) +{ + writel(0, base + OWL_Tx_CTL); + writel(0, base + OWL_Tx_VAL); + writel(0, base + OWL_Tx_CMP); +} + +static inline void owl_timer_set_enabled(void __iomem *base, bool enabled) +{ + u32 ctl = readl(base + OWL_Tx_CTL); + + /* PD bit is cleared when set */ + ctl &= ~OWL_Tx_CTL_PD; + + if (enabled) + ctl |= OWL_Tx_CTL_EN; + else + ctl &= ~OWL_Tx_CTL_EN; + + writel(ctl, base + OWL_Tx_CTL); +} + +static u64 notrace owl_timer_sched_read(void) +{ + return (u64)readl(owl_clksrc_base + OWL_Tx_VAL); +} + +static int owl_timer_set_state_shutdown(struct clock_event_device *evt) +{ + owl_timer_set_enabled(owl_clkevt_base, false); + + return 0; +} + +static int owl_timer_set_state_oneshot(struct clock_event_device *evt) +{ + owl_timer_reset(owl_clkevt_base); + + return 0; +} + +static int owl_timer_tick_resume(struct clock_event_device *evt) +{ + return 0; +} + +static int owl_timer_set_next_event(unsigned long evt, + struct clock_event_device *ev) +{ + void __iomem *base = owl_clkevt_base; + + owl_timer_set_enabled(base, false); + writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL); + writel(0, base + OWL_Tx_VAL); + writel(evt, base + OWL_Tx_CMP); + owl_timer_set_enabled(base, true); + + return 0; +} + +static struct clock_event_device owl_clockevent = { + .name = "owl_tick", + .rating = 200, + .features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_DYNIRQ, + .set_state_shutdown = owl_timer_set_state_shutdown, + .set_state_oneshot = owl_timer_set_state_oneshot, + .tick_resume = owl_timer_tick_resume, + .set_next_event = owl_timer_set_next_event, +}; + +static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int __init owl_timer_init(struct device_node *node) +{ + struct clk *clk; + unsigned long rate; + int timer1_irq, ret; + + owl_timer_base = of_io_request_and_map(node, 0, "owl-timer"); + if (IS_ERR(owl_timer_base)) { + pr_err("Can't map timer registers"); + return PTR_ERR(owl_timer_base); + } + + owl_clksrc_base = owl_timer_base + 0x08; + owl_clkevt_base = owl_timer_base + 0x14; + + timer1_irq = of_irq_get_byname(node, "timer1"); + if (timer1_irq <= 0) { + pr_err("Can't parse timer1 IRQ"); + return -EINVAL; + } + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + rate = clk_get_rate(clk); + + owl_timer_reset(owl_clksrc_base); + owl_timer_set_enabled(owl_clksrc_base, true); + + sched_clock_register(owl_timer_sched_read, 32, rate); + clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name, + rate, 200, 32, clocksource_mmio_readl_up); + + owl_timer_reset(owl_clkevt_base); + + ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER, + "owl-timer", &owl_clockevent); + if (ret) { + pr_err("failed to request irq %d\n", timer1_irq); + return ret; + } + + owl_clockevent.cpumask = cpumask_of(0); + owl_clockevent.irq = timer1_irq; + + clockevents_config_and_register(&owl_clockevent, rate, + 0xf, 0xffffffff); + + return 0; +} +CLOCKSOURCE_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init); +CLOCKSOURCE_OF_DECLARE(owl_s900, "actions,s900-timer", owl_timer_init); diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index ea7a4e1b68c2..8de2364b5995 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -30,46 +30,20 @@ static struct scpi_ops *scpi_ops; -static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) -{ - int domain = topology_physical_package_id(cpu_dev->id); - - if (domain < 0) - return ERR_PTR(-EINVAL); - return scpi_ops->dvfs_get_info(domain); -} - static int scpi_get_transition_latency(struct device *cpu_dev) { - struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); - - if (IS_ERR(info)) - return PTR_ERR(info); - return info->latency; + return scpi_ops->get_transition_latency(cpu_dev); } static int scpi_init_opp_table(const struct cpumask *cpumask) { - int idx, ret; - struct scpi_opp *opp; + int ret; struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask)); - struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); - - if (IS_ERR(info)) - return PTR_ERR(info); - - if (!info->opps) - return -EIO; - for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { - ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000); - if (ret) { - dev_warn(cpu_dev, "failed to add opp %uHz %umV\n", - opp->freq, opp->m_volt); - while (idx-- > 0) - dev_pm_opp_remove(cpu_dev, (--opp)->freq); - return ret; - } + ret = scpi_ops->add_opps_to_device(cpu_dev); + if (ret) { + dev_warn(cpu_dev, "failed to add opps to the device\n"); + return ret; } ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask); diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index f6cfc31d34c7..8043e51de897 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -39,6 +39,7 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/printk.h> +#include <linux/pm_opp.h> #include <linux/scpi_protocol.h> #include <linux/slab.h> #include <linux/sort.h> @@ -684,6 +685,65 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain) return info; } +static int scpi_dev_domain_id(struct device *dev) +{ + struct of_phandle_args clkspec; + + if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells", + 0, &clkspec)) + return -EINVAL; + + return clkspec.args[0]; +} + +static struct scpi_dvfs_info *scpi_dvfs_info(struct device *dev) +{ + int domain = scpi_dev_domain_id(dev); + + if (domain < 0) + return ERR_PTR(domain); + + return scpi_dvfs_get_info(domain); +} + +static int scpi_dvfs_get_transition_latency(struct device *dev) +{ + struct scpi_dvfs_info *info = scpi_dvfs_info(dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + + if (!info->latency) + return 0; + + return info->latency; +} + +static int scpi_dvfs_add_opps_to_device(struct device *dev) +{ + int idx, ret; + struct scpi_opp *opp; + struct scpi_dvfs_info *info = scpi_dvfs_info(dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + + if (!info->opps) + return -EIO; + + for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { + ret = dev_pm_opp_add(dev, opp->freq, opp->m_volt * 1000); + if (ret) { + dev_warn(dev, "failed to add opp %uHz %umV\n", + opp->freq, opp->m_volt); + while (idx-- > 0) + dev_pm_opp_remove(dev, (--opp)->freq); + return ret; + } + } + return 0; +} + static int scpi_sensor_get_capability(u16 *sensors) { struct sensor_capabilities cap_buf; @@ -765,6 +825,9 @@ static struct scpi_ops scpi_ops = { .dvfs_get_idx = scpi_dvfs_get_idx, .dvfs_set_idx = scpi_dvfs_set_idx, .dvfs_get_info = scpi_dvfs_get_info, + .device_domain_id = scpi_dev_domain_id, + .get_transition_latency = scpi_dvfs_get_transition_latency, + .add_opps_to_device = scpi_dvfs_add_opps_to_device, .sensor_get_capability = scpi_sensor_get_capability, .sensor_get_info = scpi_sensor_get_info, .sensor_get_value = scpi_sensor_get_value, diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c index 84e4c9a58a0c..b25179517cc5 100644 --- a/drivers/firmware/tegra/bpmp.c +++ b/drivers/firmware/tegra/bpmp.c @@ -211,14 +211,17 @@ static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel, int index; index = tegra_bpmp_channel_get_thread_index(channel); - if (index < 0) - return index; + if (index < 0) { + err = index; + goto unlock; + } spin_lock_irqsave(&bpmp->lock, flags); err = __tegra_bpmp_channel_read(channel, data, size); clear_bit(index, bpmp->threaded.allocated); spin_unlock_irqrestore(&bpmp->lock, flags); +unlock: up(&bpmp->threaded.lock); return err; @@ -256,18 +259,18 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq, index = find_first_zero_bit(bpmp->threaded.allocated, count); if (index == count) { - channel = ERR_PTR(-EBUSY); + err = -EBUSY; goto unlock; } channel = tegra_bpmp_channel_get_thread(bpmp, index); if (!channel) { - channel = ERR_PTR(-EINVAL); + err = -EINVAL; goto unlock; } if (!tegra_bpmp_master_free(channel)) { - channel = ERR_PTR(-EBUSY); + err = -EBUSY; goto unlock; } @@ -275,16 +278,21 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq, err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING, data, size); - if (err < 0) { - clear_bit(index, bpmp->threaded.allocated); - goto unlock; - } + if (err < 0) + goto clear_allocated; set_bit(index, bpmp->threaded.busy); -unlock: spin_unlock_irqrestore(&bpmp->lock, flags); return channel; + +clear_allocated: + clear_bit(index, bpmp->threaded.allocated); +unlock: + spin_unlock_irqrestore(&bpmp->lock, flags); + up(&bpmp->threaded.lock); + + return ERR_PTR(err); } static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel, @@ -810,6 +818,10 @@ static int tegra_bpmp_probe(struct platform_device *pdev) if (err < 0) goto free_mrq; + err = tegra_bpmp_init_powergates(bpmp); + if (err < 0) + goto free_mrq; + platform_set_drvdata(pdev, bpmp); return 0; diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 6d1b4b707cc2..a80e17de906d 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -460,12 +460,12 @@ static int get_gpmc_timing_reg( if (l) time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1; time_ns = gpmc_clk_ticks_to_ns(l, cs, cd); - pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n", + pr_info("gpmc,%s = <%u>; /* %u ns - %u ns; %i ticks%s*/\n", name, time_ns, time_ns_min, time_ns, l, invalid ? "; invalid " : " "); } else { /* raw format */ - pr_info("gpmc,%s = <%u>%s\n", name, l, + pr_info("gpmc,%s = <%u>;%s\n", name, l, invalid ? " /* invalid */" : ""); } @@ -2083,8 +2083,11 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, } else { ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); - if (ret < 0) + if (ret < 0) { + dev_err(&pdev->dev, "%s has no 'bank-width' property\n", + child->full_name); goto err; + } } /* Reserve wait pin if it is required and valid */ diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index d21c07ccc94e..608c071e4bbf 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -34,6 +34,13 @@ config RESET_BERLIN help This enables the reset controller driver for Marvell Berlin SoCs. +config RESET_GEMINI + bool "Gemini Reset Driver" if COMPILE_TEST + default ARCH_GEMINI + select MFD_SYSCON + help + This enables the reset controller driver for Cortina Systems Gemini. + config RESET_IMX7 bool "i.MX7 Reset Driver" if COMPILE_TEST default SOC_IMX7D @@ -80,7 +87,15 @@ config RESET_SUNXI help This enables the reset driver for Allwinner SoCs. -config TI_SYSCON_RESET +config RESET_TI_SCI + tristate "TI System Control Interface (TI-SCI) reset driver" + depends on TI_SCI_PROTOCOL + help + This enables the reset driver support over TI System Control Interface + available on some new TI's SoCs. If you wish to use reset resources + managed by the TI System Controller, say Y here. Otherwise, say N. + +config RESET_TI_SYSCON tristate "TI SYSCON Reset Driver" depends on HAS_IOMEM select MFD_SYSCON diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 02a74db94339..7081f9da2599 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o +obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o obj-$(CONFIG_RESET_MESON) += reset-meson.o @@ -13,7 +14,8 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_STM32) += reset-stm32.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o -obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o +obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o +obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c index cd739d2fa160..0090784ff410 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -13,6 +13,7 @@ #include <linux/err.h> #include <linux/export.h> #include <linux/kernel.h> +#include <linux/kref.h> #include <linux/module.h> #include <linux/of.h> #include <linux/reset.h> @@ -40,7 +41,7 @@ struct reset_control { struct reset_controller_dev *rcdev; struct list_head list; unsigned int id; - unsigned int refcnt; + struct kref refcnt; bool shared; atomic_t deassert_count; atomic_t triggered_count; @@ -288,7 +289,7 @@ static struct reset_control *__reset_control_get_internal( if (WARN_ON(!rstc->shared || !shared)) return ERR_PTR(-EBUSY); - rstc->refcnt++; + kref_get(&rstc->refcnt); return rstc; } } @@ -302,18 +303,18 @@ static struct reset_control *__reset_control_get_internal( rstc->rcdev = rcdev; list_add(&rstc->list, &rcdev->reset_control_head); rstc->id = index; - rstc->refcnt = 1; + kref_init(&rstc->refcnt); rstc->shared = shared; return rstc; } -static void __reset_control_put_internal(struct reset_control *rstc) +static void __reset_control_release(struct kref *kref) { - lockdep_assert_held(&reset_list_mutex); + struct reset_control *rstc = container_of(kref, struct reset_control, + refcnt); - if (--rstc->refcnt) - return; + lockdep_assert_held(&reset_list_mutex); module_put(rstc->rcdev->owner); @@ -321,6 +322,13 @@ static void __reset_control_put_internal(struct reset_control *rstc) kfree(rstc); } +static void __reset_control_put_internal(struct reset_control *rstc) +{ + lockdep_assert_held(&reset_list_mutex); + + kref_put(&rstc->refcnt, __reset_control_release); +} + struct reset_control *__of_reset_control_get(struct device_node *node, const char *id, int index, bool shared, bool optional) @@ -400,7 +408,6 @@ EXPORT_SYMBOL_GPL(__reset_control_get); * reset_control_put - free the reset controller * @rstc: reset controller */ - void reset_control_put(struct reset_control *rstc) { if (IS_ERR_OR_NULL(rstc)) diff --git a/drivers/reset/reset-gemini.c b/drivers/reset/reset-gemini.c new file mode 100644 index 000000000000..a2478997c75b --- /dev/null +++ b/drivers/reset/reset-gemini.c @@ -0,0 +1,110 @@ +/* + * Cortina Gemini Reset controller driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <dt-bindings/reset/cortina,gemini-reset.h> + +/** + * struct gemini_reset - gemini reset controller + * @map: regmap to access the containing system controller + * @rcdev: reset controller device + */ +struct gemini_reset { + struct regmap *map; + struct reset_controller_dev rcdev; +}; + +#define GEMINI_GLOBAL_SOFT_RESET 0x0c + +#define to_gemini_reset(p) \ + container_of((p), struct gemini_reset, rcdev) + +/* + * This is a self-deasserting reset controller. + */ +static int gemini_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct gemini_reset *gr = to_gemini_reset(rcdev); + + /* Manual says to always set BIT 30 (CPU1) to 1 */ + return regmap_write(gr->map, + GEMINI_GLOBAL_SOFT_RESET, + BIT(GEMINI_RESET_CPU1) | BIT(id)); +} + +static int gemini_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct gemini_reset *gr = to_gemini_reset(rcdev); + u32 val; + int ret; + + ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val); + if (ret) + return ret; + + return !!(val & BIT(id)); +} + +static const struct reset_control_ops gemini_reset_ops = { + .reset = gemini_reset, + .status = gemini_reset_status, +}; + +static int gemini_reset_probe(struct platform_device *pdev) +{ + struct gemini_reset *gr; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int ret; + + gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL); + if (!gr) + return -ENOMEM; + + gr->map = syscon_node_to_regmap(np); + if (IS_ERR(gr->map)) { + ret = PTR_ERR(gr->map); + dev_err(dev, "unable to get regmap (%d)", ret); + return ret; + } + gr->rcdev.owner = THIS_MODULE; + gr->rcdev.nr_resets = 32; + gr->rcdev.ops = &gemini_reset_ops; + gr->rcdev.of_node = pdev->dev.of_node; + + ret = devm_reset_controller_register(&pdev->dev, &gr->rcdev); + if (ret) + return ret; + + dev_info(dev, "registered Gemini reset controller\n"); + return 0; +} + +static const struct of_device_id gemini_reset_dt_ids[] = { + { .compatible = "cortina,gemini-syscon", }, + { /* sentinel */ }, +}; + +static struct platform_driver gemini_reset_driver = { + .probe = gemini_reset_probe, + .driver = { + .name = "gemini-reset", + .of_match_table = gemini_reset_dt_ids, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(gemini_reset_driver); diff --git a/drivers/reset/reset-ti-sci.c b/drivers/reset/reset-ti-sci.c new file mode 100644 index 000000000000..bf68729ab729 --- /dev/null +++ b/drivers/reset/reset-ti-sci.c @@ -0,0 +1,269 @@ +/* + * Texas Instrument's System Control Interface (TI-SCI) reset driver + * + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/idr.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/soc/ti/ti_sci_protocol.h> + +/** + * struct ti_sci_reset_control - reset control structure + * @dev_id: SoC-specific device identifier + * @reset_mask: reset mask to use for toggling reset + * @lock: synchronize reset_mask read-modify-writes + */ +struct ti_sci_reset_control { + u32 dev_id; + u32 reset_mask; + struct mutex lock; +}; + +/** + * struct ti_sci_reset_data - reset controller information structure + * @rcdev: reset controller entity + * @dev: reset controller device pointer + * @sci: TI SCI handle used for communication with system controller + * @idr: idr structure for mapping ids to reset control structures + */ +struct ti_sci_reset_data { + struct reset_controller_dev rcdev; + struct device *dev; + const struct ti_sci_handle *sci; + struct idr idr; +}; + +#define to_ti_sci_reset_data(p) \ + container_of((p), struct ti_sci_reset_data, rcdev) + +/** + * ti_sci_reset_set() - program a device's reset + * @rcdev: reset controller entity + * @id: ID of the reset to toggle + * @assert: boolean flag to indicate assert or deassert + * + * This is a common internal function used to assert or deassert a device's + * reset using the TI SCI protocol. The device's reset is asserted if the + * @assert argument is true, or deasserted if @assert argument is false. + * The mechanism itself is a read-modify-write procedure, the current device + * reset register is read using a TI SCI device operation, the new value is + * set or un-set using the reset's mask, and the new reset value written by + * using another TI SCI device operation. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_sci_reset_set(struct reset_controller_dev *rcdev, + unsigned long id, bool assert) +{ + struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev); + const struct ti_sci_handle *sci = data->sci; + const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops; + struct ti_sci_reset_control *control; + u32 reset_state; + int ret; + + control = idr_find(&data->idr, id); + if (!control) + return -EINVAL; + + mutex_lock(&control->lock); + + ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state); + if (ret) + goto out; + + if (assert) + reset_state |= control->reset_mask; + else + reset_state &= ~control->reset_mask; + + ret = dev_ops->set_device_resets(sci, control->dev_id, reset_state); +out: + mutex_unlock(&control->lock); + + return ret; +} + +/** + * ti_sci_reset_assert() - assert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be asserted + * + * This function implements the reset driver op to assert a device's reset + * using the TI SCI protocol. This invokes the function ti_sci_reset_set() + * with the corresponding parameters as passed in, but with the @assert + * argument set to true for asserting the reset. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_sci_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return ti_sci_reset_set(rcdev, id, true); +} + +/** + * ti_sci_reset_deassert() - deassert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be deasserted + * + * This function implements the reset driver op to deassert a device's reset + * using the TI SCI protocol. This invokes the function ti_sci_reset_set() + * with the corresponding parameters as passed in, but with the @assert + * argument set to false for deasserting the reset. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_sci_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return ti_sci_reset_set(rcdev, id, false); +} + +/** + * ti_sci_reset_status() - check device reset status + * @rcdev: reset controller entity + * @id: ID of reset to be checked + * + * This function implements the reset driver op to return the status of a + * device's reset using the TI SCI protocol. The reset register value is read + * by invoking the TI SCI device operation .get_device_resets(), and the + * status of the specific reset is extracted and returned using this reset's + * reset mask. + * + * Return: 0 if reset is deasserted, or a non-zero value if reset is asserted + */ +static int ti_sci_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev); + const struct ti_sci_handle *sci = data->sci; + const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops; + struct ti_sci_reset_control *control; + u32 reset_state; + int ret; + + control = idr_find(&data->idr, id); + if (!control) + return -EINVAL; + + ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state); + if (ret) + return ret; + + return reset_state & control->reset_mask; +} + +static const struct reset_control_ops ti_sci_reset_ops = { + .assert = ti_sci_reset_assert, + .deassert = ti_sci_reset_deassert, + .status = ti_sci_reset_status, +}; + +/** + * ti_sci_reset_of_xlate() - translate a set of OF arguments to a reset ID + * @rcdev: reset controller entity + * @reset_spec: OF reset argument specifier + * + * This function performs the translation of the reset argument specifier + * values defined in a reset consumer device node. The function allocates a + * reset control structure for that device reset, and will be used by the + * driver for performing any reset functions on that reset. An idr structure + * is allocated and used to map to the reset control structure. This idr + * is used by the driver to do reset lookups. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_sci_reset_of_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev); + struct ti_sci_reset_control *control; + + if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells)) + return -EINVAL; + + control = devm_kzalloc(data->dev, sizeof(*control), GFP_KERNEL); + if (!control) + return -ENOMEM; + + control->dev_id = reset_spec->args[0]; + control->reset_mask = reset_spec->args[1]; + mutex_init(&control->lock); + + return idr_alloc(&data->idr, control, 0, 0, GFP_KERNEL); +} + +static const struct of_device_id ti_sci_reset_of_match[] = { + { .compatible = "ti,sci-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_sci_reset_of_match); + +static int ti_sci_reset_probe(struct platform_device *pdev) +{ + struct ti_sci_reset_data *data; + + if (!pdev->dev.of_node) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->sci = devm_ti_sci_get_handle(&pdev->dev); + if (IS_ERR(data->sci)) + return PTR_ERR(data->sci); + + data->rcdev.ops = &ti_sci_reset_ops; + data->rcdev.owner = THIS_MODULE; + data->rcdev.of_node = pdev->dev.of_node; + data->rcdev.of_reset_n_cells = 2; + data->rcdev.of_xlate = ti_sci_reset_of_xlate; + data->dev = &pdev->dev; + idr_init(&data->idr); + + platform_set_drvdata(pdev, data); + + return reset_controller_register(&data->rcdev); +} + +static int ti_sci_reset_remove(struct platform_device *pdev) +{ + struct ti_sci_reset_data *data = platform_get_drvdata(pdev); + + reset_controller_unregister(&data->rcdev); + + idr_destroy(&data->idr); + + return 0; +} + +static struct platform_driver ti_sci_reset_driver = { + .probe = ti_sci_reset_probe, + .remove = ti_sci_reset_remove, + .driver = { + .name = "ti-sci-reset", + .of_match_table = ti_sci_reset_of_match, + }, +}; +module_platform_driver(ti_sci_reset_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TI System Control Interface (TI SCI) Reset driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/reset/sti/reset-syscfg.c b/drivers/reset/sti/reset-syscfg.c index 9bd57a5eee72..7e0f2aa55ba7 100644 --- a/drivers/reset/sti/reset-syscfg.c +++ b/drivers/reset/sti/reset-syscfg.c @@ -145,16 +145,14 @@ static int syscfg_reset_controller_register(struct device *dev, const struct syscfg_reset_controller_data *data) { struct syscfg_reset_controller *rc; - size_t size; int i, err; rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL); if (!rc) return -ENOMEM; - size = sizeof(struct syscfg_reset_channel) * data->nr_channels; - - rc->channels = devm_kzalloc(dev, size, GFP_KERNEL); + rc->channels = devm_kcalloc(dev, data->nr_channels, + sizeof(*rc->channels), GFP_KERNEL); if (!rc->channels) return -ENOMEM; diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index a63eb0ffba98..07fc0ac51c52 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -7,6 +7,7 @@ source "drivers/soc/fsl/Kconfig" source "drivers/soc/imx/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" +source "drivers/soc/renesas/Kconfig" source "drivers/soc/rockchip/Kconfig" source "drivers/soc/samsung/Kconfig" source "drivers/soc/sunxi/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index a3b27a33c309..9241125416ba 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -11,7 +11,7 @@ obj-y += fsl/ obj-$(CONFIG_ARCH_MXC) += imx/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_QCOM) += qcom/ -obj-$(CONFIG_ARCH_RENESAS) += renesas/ +obj-y += renesas/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_SOC_SAMSUNG) += samsung/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index a39b0d58ddd0..49f1e2a75d61 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -11,7 +11,7 @@ config RASPBERRYPI_POWER config SOC_BRCMSTB bool "Broadcom STB SoC drivers" - depends on ARM + depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST select SOC_BUS help Enables drivers for the Broadcom Set-Top Box (STB) series of chips. diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index 5b6e396c1121..aab41a5cc317 100644 --- a/drivers/soc/imx/Makefile +++ b/drivers/soc/imx/Makefile @@ -1,2 +1,2 @@ -obj-y += gpc.o +obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c index a5f10936fb9c..c80a04e1b2b1 100644 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -1117,6 +1117,11 @@ static int pwrap_probe(struct platform_device *pdev) const struct of_device_id *of_slave_id = NULL; struct resource *res; + if (!of_id) { + dev_err(&pdev->dev, "Error: No device match found\n"); + return -ENODEV; + } + if (pdev->dev.of_node->child) of_slave_id = of_match_node(of_slave_match_tbl, pdev->dev.of_node->child); @@ -1200,7 +1205,8 @@ static int pwrap_probe(struct platform_device *pdev) if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) { dev_dbg(wrp->dev, "initialization isn't finished\n"); - return -ENODEV; + ret = -ENODEV; + goto err_out2; } /* Initialize watchdog, may not be done by the bootloader */ @@ -1220,8 +1226,10 @@ static int pwrap_probe(struct platform_device *pdev) goto err_out2; wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config); - if (IS_ERR(wrp->regmap)) - return PTR_ERR(wrp->regmap); + if (IS_ERR(wrp->regmap)) { + ret = PTR_ERR(wrp->regmap); + goto err_out2; + } ret = of_platform_populate(np, NULL, NULL, wrp->dev); if (ret) { diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index beb79162369a..ceb2cc495cd0 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -21,6 +21,7 @@ #include <linux/soc/mediatek/infracfg.h> #include <dt-bindings/power/mt2701-power.h> +#include <dt-bindings/power/mt6797-power.h> #include <dt-bindings/power/mt8173-power.h> #define SPM_VDE_PWR_CON 0x0210 @@ -71,6 +72,7 @@ enum clk_id { CLK_VENC, CLK_VENC_LT, CLK_ETHIF, + CLK_VDEC, CLK_MAX, }; @@ -81,6 +83,7 @@ static const char * const clk_names[] = { "venc", "venc_lt", "ethif", + "vdec", NULL, }; @@ -107,21 +110,28 @@ struct scp_domain { struct regulator *supply; }; +struct scp_ctrl_reg { + int pwr_sta_offs; + int pwr_sta2nd_offs; +}; + struct scp { struct scp_domain *domains; struct genpd_onecell_data pd_data; struct device *dev; void __iomem *base; struct regmap *infracfg; + struct scp_ctrl_reg ctrl_reg; }; static int scpsys_domain_is_on(struct scp_domain *scpd) { struct scp *scp = scpd->scp; - u32 status = readl(scp->base + SPM_PWR_STATUS) & scpd->data->sta_mask; - u32 status2 = readl(scp->base + SPM_PWR_STATUS_2ND) & - scpd->data->sta_mask; + u32 status = readl(scp->base + scp->ctrl_reg.pwr_sta_offs) & + scpd->data->sta_mask; + u32 status2 = readl(scp->base + scp->ctrl_reg.pwr_sta2nd_offs) & + scpd->data->sta_mask; /* * A domain is on when both status bits are set. If only one is set @@ -346,7 +356,8 @@ static void init_clks(struct platform_device *pdev, struct clk **clk) } static struct scp *init_scp(struct platform_device *pdev, - const struct scp_domain_data *scp_domain_data, int num) + const struct scp_domain_data *scp_domain_data, int num, + struct scp_ctrl_reg *scp_ctrl_reg) { struct genpd_onecell_data *pd_data; struct resource *res; @@ -358,6 +369,9 @@ static struct scp *init_scp(struct platform_device *pdev, if (!scp) return ERR_PTR(-ENOMEM); + scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs; + scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs; + scp->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -556,8 +570,13 @@ static const struct scp_domain_data scp_domain_data_mt2701[] = { static int __init scpsys_probe_mt2701(struct platform_device *pdev) { struct scp *scp; + struct scp_ctrl_reg scp_reg; - scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701); + scp_reg.pwr_sta_offs = SPM_PWR_STATUS; + scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND; + + scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701, + &scp_reg); if (IS_ERR(scp)) return PTR_ERR(scp); @@ -567,6 +586,116 @@ static int __init scpsys_probe_mt2701(struct platform_device *pdev) } /* + * MT6797 power domain support + */ + +static const struct scp_domain_data scp_domain_data_mt6797[] = { + [MT6797_POWER_DOMAIN_VDEC] = { + .name = "vdec", + .sta_mask = BIT(7), + .ctl_offs = 0x300, + .sram_pdn_bits = GENMASK(8, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_VDEC}, + }, + [MT6797_POWER_DOMAIN_VENC] = { + .name = "venc", + .sta_mask = BIT(21), + .ctl_offs = 0x304, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_NONE}, + }, + [MT6797_POWER_DOMAIN_ISP] = { + .name = "isp", + .sta_mask = BIT(5), + .ctl_offs = 0x308, + .sram_pdn_bits = GENMASK(9, 8), + .sram_pdn_ack_bits = GENMASK(13, 12), + .clk_id = {CLK_NONE}, + }, + [MT6797_POWER_DOMAIN_MM] = { + .name = "mm", + .sta_mask = BIT(3), + .ctl_offs = 0x30C, + .sram_pdn_bits = GENMASK(8, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_MM}, + .bus_prot_mask = (BIT(1) | BIT(2)), + }, + [MT6797_POWER_DOMAIN_AUDIO] = { + .name = "audio", + .sta_mask = BIT(24), + .ctl_offs = 0x314, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_NONE}, + }, + [MT6797_POWER_DOMAIN_MFG_ASYNC] = { + .name = "mfg_async", + .sta_mask = BIT(13), + .ctl_offs = 0x334, + .sram_pdn_bits = 0, + .sram_pdn_ack_bits = 0, + .clk_id = {CLK_MFG}, + }, + [MT6797_POWER_DOMAIN_MJC] = { + .name = "mjc", + .sta_mask = BIT(20), + .ctl_offs = 0x310, + .sram_pdn_bits = GENMASK(8, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_NONE}, + }, +}; + +#define NUM_DOMAINS_MT6797 ARRAY_SIZE(scp_domain_data_mt6797) +#define SPM_PWR_STATUS_MT6797 0x0180 +#define SPM_PWR_STATUS_2ND_MT6797 0x0184 + +static int __init scpsys_probe_mt6797(struct platform_device *pdev) +{ + struct scp *scp; + struct genpd_onecell_data *pd_data; + int ret; + struct scp_ctrl_reg scp_reg; + + scp_reg.pwr_sta_offs = SPM_PWR_STATUS_MT6797; + scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND_MT6797; + + scp = init_scp(pdev, scp_domain_data_mt6797, NUM_DOMAINS_MT6797, + &scp_reg); + if (IS_ERR(scp)) + return PTR_ERR(scp); + + mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT6797); + + pd_data = &scp->pd_data; + + ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM], + pd_data->domains[MT6797_POWER_DOMAIN_VDEC]); + if (ret && IS_ENABLED(CONFIG_PM)) + dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret); + + ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM], + pd_data->domains[MT6797_POWER_DOMAIN_ISP]); + if (ret && IS_ENABLED(CONFIG_PM)) + dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret); + + ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM], + pd_data->domains[MT6797_POWER_DOMAIN_VENC]); + if (ret && IS_ENABLED(CONFIG_PM)) + dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret); + + ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM], + pd_data->domains[MT6797_POWER_DOMAIN_MJC]); + if (ret && IS_ENABLED(CONFIG_PM)) + dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret); + + return 0; +} + +/* * MT8173 power domain support */ @@ -667,8 +796,13 @@ static int __init scpsys_probe_mt8173(struct platform_device *pdev) struct scp *scp; struct genpd_onecell_data *pd_data; int ret; + struct scp_ctrl_reg scp_reg; - scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173); + scp_reg.pwr_sta_offs = SPM_PWR_STATUS; + scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND; + + scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173, + &scp_reg); if (IS_ERR(scp)) return PTR_ERR(scp); @@ -698,6 +832,9 @@ static const struct of_device_id of_scpsys_match_tbl[] = { .compatible = "mediatek,mt2701-scpsys", .data = scpsys_probe_mt2701, }, { + .compatible = "mediatek,mt6797-scpsys", + .data = scpsys_probe_mt6797, + }, { .compatible = "mediatek,mt8173-scpsys", .data = scpsys_probe_mt8173, }, { diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c index d0337b2a71c8..dc540ea92e9d 100644 --- a/drivers/soc/qcom/smsm.c +++ b/drivers/soc/qcom/smsm.c @@ -439,14 +439,15 @@ static int smsm_get_size_info(struct qcom_smsm *smsm) } *info; info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SIZE_INFO, &size); - if (PTR_ERR(info) == -ENOENT || size != sizeof(*info)) { + if (IS_ERR(info) && PTR_ERR(info) != -ENOENT) { + if (PTR_ERR(info) != -EPROBE_DEFER) + dev_err(smsm->dev, "unable to retrieve smsm size info\n"); + return PTR_ERR(info); + } else if (IS_ERR(info) || size != sizeof(*info)) { dev_warn(smsm->dev, "no smsm size info, using defaults\n"); smsm->num_entries = SMSM_DEFAULT_NUM_ENTRIES; smsm->num_hosts = SMSM_DEFAULT_NUM_HOSTS; return 0; - } else if (IS_ERR(info)) { - dev_err(smsm->dev, "unable to retrieve smsm size info\n"); - return PTR_ERR(info); } smsm->num_entries = info->num_entries; diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig new file mode 100644 index 000000000000..87a4be46bd98 --- /dev/null +++ b/drivers/soc/renesas/Kconfig @@ -0,0 +1,63 @@ +config SOC_RENESAS + bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS + default y if ARCH_RENESAS + select SOC_BUS + select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \ + ARCH_R8A7795 || ARCH_R8A7796 + select SYSC_R8A7743 if ARCH_R8A7743 + select SYSC_R8A7745 if ARCH_R8A7745 + select SYSC_R8A7779 if ARCH_R8A7779 + select SYSC_R8A7790 if ARCH_R8A7790 + select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793 + select SYSC_R8A7792 if ARCH_R8A7792 + select SYSC_R8A7794 if ARCH_R8A7794 + select SYSC_R8A7795 if ARCH_R8A7795 + select SYSC_R8A7796 if ARCH_R8A7796 + +if SOC_RENESAS + +# SoC +config SYSC_R8A7743 + bool "RZ/G1M System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7745 + bool "RZ/G1E System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7779 + bool "R-Car H1 System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7790 + bool "R-Car H2 System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7791 + bool "R-Car M2-W/N System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7792 + bool "R-Car V2H System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7794 + bool "R-Car E2 System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7795 + bool "R-Car H3 System Controller support" if COMPILE_TEST + select SYSC_RCAR + +config SYSC_R8A7796 + bool "R-Car M3-W System Controller support" if COMPILE_TEST + select SYSC_RCAR + +# Family +config RST_RCAR + bool "R-Car Reset Controller support" if COMPILE_TEST + +config SYSC_RCAR + bool "R-Car System Controller support" if COMPILE_TEST + +endif # SOC_RENESAS diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index d9115cb5ed9d..1a1a297b26a7 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,18 +1,17 @@ -obj-$(CONFIG_SOC_BUS) += renesas-soc.o +# Generic, must be first because of soc_device_register() +obj-$(CONFIG_SOC_RENESAS) += renesas-soc.o -obj-$(CONFIG_ARCH_RCAR_GEN1) += rcar-rst.o -obj-$(CONFIG_ARCH_RCAR_GEN2) += rcar-rst.o -obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o -obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o +# SoC +obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o +obj-$(CONFIG_SYSC_R8A7745) += r8a7745-sysc.o +obj-$(CONFIG_SYSC_R8A7779) += r8a7779-sysc.o +obj-$(CONFIG_SYSC_R8A7790) += r8a7790-sysc.o +obj-$(CONFIG_SYSC_R8A7791) += r8a7791-sysc.o +obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o +obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o +obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o +obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o -obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o -obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o -obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o -obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o -obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o -obj-$(CONFIG_ARCH_R8A7792) += rcar-sysc.o r8a7792-sysc.o -# R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. -obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o -obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o -obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o -obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o +# Family +obj-$(CONFIG_RST_RCAR) += rcar-rst.o +obj-$(CONFIG_SYSC_RCAR) += rcar-sysc.o diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 528a13742aeb..7c8da3c90011 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -181,17 +181,6 @@ static int rcar_sysc_pd_power_off(struct generic_pm_domain *genpd) struct rcar_sysc_pd *pd = to_rcar_pd(genpd); pr_debug("%s: %s\n", __func__, genpd->name); - - if (pd->flags & PD_NO_CR) { - pr_debug("%s: Cannot control %s\n", __func__, genpd->name); - return -EBUSY; - } - - if (pd->flags & PD_BUSY) { - pr_debug("%s: %s busy\n", __func__, genpd->name); - return -EBUSY; - } - return rcar_sysc_power_down(&pd->ch); } @@ -200,12 +189,6 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) struct rcar_sysc_pd *pd = to_rcar_pd(genpd); pr_debug("%s: %s\n", __func__, genpd->name); - - if (pd->flags & PD_NO_CR) { - pr_debug("%s: Cannot control %s\n", __func__, genpd->name); - return 0; - } - return rcar_sysc_power_up(&pd->ch); } @@ -223,8 +206,7 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) * only be turned off if the CPU is not in use. */ pr_debug("PM domain %s contains %s\n", name, "CPU"); - pd->flags |= PD_BUSY; - gov = &pm_domain_always_on_gov; + genpd->flags |= GENPD_FLAG_ALWAYS_ON; } else if (pd->flags & PD_SCU) { /* * This domain contains an SCU and cache-controller, and @@ -232,19 +214,17 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) * not in use. */ pr_debug("PM domain %s contains %s\n", name, "SCU"); - pd->flags |= PD_BUSY; - gov = &pm_domain_always_on_gov; + genpd->flags |= GENPD_FLAG_ALWAYS_ON; } else if (pd->flags & PD_NO_CR) { /* * This domain cannot be turned off. */ - pd->flags |= PD_BUSY; - gov = &pm_domain_always_on_gov; + genpd->flags |= GENPD_FLAG_ALWAYS_ON; } if (!(pd->flags & (PD_CPU | PD_SCU))) { /* Enable Clock Domain for I/O devices */ - genpd->flags = GENPD_FLAG_PM_CLK; + genpd->flags |= GENPD_FLAG_PM_CLK; if (has_cpg_mstp) { genpd->attach_dev = cpg_mstp_attach_dev; genpd->detach_dev = cpg_mstp_detach_dev; @@ -275,35 +255,33 @@ finalize: } static const struct of_device_id rcar_sysc_matches[] = { -#ifdef CONFIG_ARCH_R8A7743 +#ifdef CONFIG_SYSC_R8A7743 { .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7745 +#ifdef CONFIG_SYSC_R8A7745 { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7779 +#ifdef CONFIG_SYSC_R8A7779 { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7790 +#ifdef CONFIG_SYSC_R8A7790 { .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7791 +#ifdef CONFIG_SYSC_R8A7791 { .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info }, -#endif -#ifdef CONFIG_ARCH_R8A7792 - { .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info }, -#endif -#ifdef CONFIG_ARCH_R8A7793 /* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */ { .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7794 +#ifdef CONFIG_SYSC_R8A7792 + { .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info }, +#endif +#ifdef CONFIG_SYSC_R8A7794 { .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7795 +#ifdef CONFIG_SYSC_R8A7795 { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, #endif -#ifdef CONFIG_ARCH_R8A7796 +#ifdef CONFIG_SYSC_R8A7796 { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, #endif { /* sentinel */ } diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 07edb049a401..1a5bebaf54ba 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -20,8 +20,6 @@ #define PD_SCU BIT(1) /* Area contains SCU and L2 cache */ #define PD_NO_CR BIT(2) /* Area lacks PWR{ON,OFF}CR registers */ -#define PD_BUSY BIT(3) /* Busy, for internal use only */ - #define PD_CPU_CR PD_CPU /* CPU area has CR (R-Car H1) */ #define PD_CPU_NOCR PD_CPU | PD_NO_CR /* CPU area lacks CR (R-Car Gen2/3) */ #define PD_ALWAYS_ON PD_NO_CR /* Always-on area */ diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig index dcf088db40b6..1beb7c347344 100644 --- a/drivers/soc/tegra/Kconfig +++ b/drivers/soc/tegra/Kconfig @@ -115,3 +115,8 @@ config SOC_TEGRA_PMC config SOC_TEGRA_PMC_TEGRA186 bool + +config SOC_TEGRA_POWERGATE_BPMP + def_bool y + depends on PM_GENERIC_DOMAINS + depends on TEGRA_BPMP diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile index 4f81dd55e5d1..0e52b45721ac 100644 --- a/drivers/soc/tegra/Makefile +++ b/drivers/soc/tegra/Makefile @@ -4,3 +4,4 @@ obj-y += common.o obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o obj-$(CONFIG_SOC_TEGRA_PMC_TEGRA186) += pmc-tegra186.o +obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c index 0e345c05fc65..5433cc7a043e 100644 --- a/drivers/soc/tegra/flowctrl.c +++ b/drivers/soc/tegra/flowctrl.c @@ -157,7 +157,7 @@ static int tegra_flowctrl_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); tegra_flowctrl_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(tegra_flowctrl_base)) - return PTR_ERR(base); + return PTR_ERR(tegra_flowctrl_base); iounmap(base); diff --git a/drivers/soc/tegra/powergate-bpmp.c b/drivers/soc/tegra/powergate-bpmp.c new file mode 100644 index 000000000000..8fc356039401 --- /dev/null +++ b/drivers/soc/tegra/powergate-bpmp.c @@ -0,0 +1,359 @@ +/* + * Copyright (c) 2016-2017, NVIDIA CORPORATION. All rights reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/slab.h> +#include <linux/version.h> + +#include <soc/tegra/bpmp.h> +#include <soc/tegra/bpmp-abi.h> + +struct tegra_powergate_info { + unsigned int id; + char *name; +}; + +struct tegra_powergate { + struct generic_pm_domain genpd; + struct tegra_bpmp *bpmp; + unsigned int id; +}; + +static inline struct tegra_powergate * +to_tegra_powergate(struct generic_pm_domain *genpd) +{ + return container_of(genpd, struct tegra_powergate, genpd); +} + +static int tegra_bpmp_powergate_set_state(struct tegra_bpmp *bpmp, + unsigned int id, u32 state) +{ + struct mrq_pg_request request; + struct tegra_bpmp_message msg; + + memset(&request, 0, sizeof(request)); + request.cmd = CMD_PG_SET_STATE; + request.id = id; + request.set_state.state = state; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_PG; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + + return tegra_bpmp_transfer(bpmp, &msg); +} + +static int tegra_bpmp_powergate_get_state(struct tegra_bpmp *bpmp, + unsigned int id) +{ + struct mrq_pg_response response; + struct mrq_pg_request request; + struct tegra_bpmp_message msg; + int err; + + memset(&request, 0, sizeof(request)); + request.cmd = CMD_PG_GET_STATE; + request.id = id; + + memset(&response, 0, sizeof(response)); + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_PG; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + msg.rx.data = &response; + msg.rx.size = sizeof(response); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err < 0) + return PG_STATE_OFF; + + return response.get_state.state; +} + +static int tegra_bpmp_powergate_get_max_id(struct tegra_bpmp *bpmp) +{ + struct mrq_pg_response response; + struct mrq_pg_request request; + struct tegra_bpmp_message msg; + int err; + + memset(&request, 0, sizeof(request)); + request.cmd = CMD_PG_GET_MAX_ID; + + memset(&response, 0, sizeof(response)); + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_PG; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + msg.rx.data = &response; + msg.rx.size = sizeof(response); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err < 0) + return err; + + return response.get_max_id.max_id; +} + +static char *tegra_bpmp_powergate_get_name(struct tegra_bpmp *bpmp, + unsigned int id) +{ + struct mrq_pg_response response; + struct mrq_pg_request request; + struct tegra_bpmp_message msg; + int err; + + memset(&request, 0, sizeof(request)); + request.cmd = CMD_PG_GET_NAME; + request.id = id; + + memset(&response, 0, sizeof(response)); + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_PG; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + msg.rx.data = &response; + msg.rx.size = sizeof(response); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err < 0) + return NULL; + + return kstrdup(response.get_name.name, GFP_KERNEL); +} + +static inline bool tegra_bpmp_powergate_is_powered(struct tegra_bpmp *bpmp, + unsigned int id) +{ + return tegra_bpmp_powergate_get_state(bpmp, id) != PG_STATE_OFF; +} + +static int tegra_powergate_power_on(struct generic_pm_domain *domain) +{ + struct tegra_powergate *powergate = to_tegra_powergate(domain); + struct tegra_bpmp *bpmp = powergate->bpmp; + + return tegra_bpmp_powergate_set_state(bpmp, powergate->id, + PG_STATE_ON); +} + +static int tegra_powergate_power_off(struct generic_pm_domain *domain) +{ + struct tegra_powergate *powergate = to_tegra_powergate(domain); + struct tegra_bpmp *bpmp = powergate->bpmp; + + return tegra_bpmp_powergate_set_state(bpmp, powergate->id, + PG_STATE_OFF); +} + +static struct tegra_powergate * +tegra_powergate_add(struct tegra_bpmp *bpmp, + const struct tegra_powergate_info *info) +{ + struct tegra_powergate *powergate; + bool off; + int err; + + off = !tegra_bpmp_powergate_is_powered(bpmp, info->id); + + powergate = devm_kzalloc(bpmp->dev, sizeof(*powergate), GFP_KERNEL); + if (!powergate) + return ERR_PTR(-ENOMEM); + + powergate->id = info->id; + powergate->bpmp = bpmp; + + powergate->genpd.name = kstrdup(info->name, GFP_KERNEL); + powergate->genpd.power_on = tegra_powergate_power_on; + powergate->genpd.power_off = tegra_powergate_power_off; + + err = pm_genpd_init(&powergate->genpd, NULL, off); + if (err < 0) { + kfree(powergate->genpd.name); + return ERR_PTR(err); + } + + return powergate; +} + +static void tegra_powergate_remove(struct tegra_powergate *powergate) +{ + struct generic_pm_domain *genpd = &powergate->genpd; + struct tegra_bpmp *bpmp = powergate->bpmp; + int err; + + err = pm_genpd_remove(genpd); + if (err < 0) + dev_err(bpmp->dev, "failed to remove power domain %s: %d\n", + genpd->name, err); + + kfree(genpd->name); +} + +static int +tegra_bpmp_probe_powergates(struct tegra_bpmp *bpmp, + struct tegra_powergate_info **powergatesp) +{ + struct tegra_powergate_info *powergates; + unsigned int max_id, id, count = 0; + unsigned int num_holes = 0; + int err; + + err = tegra_bpmp_powergate_get_max_id(bpmp); + if (err < 0) + return err; + + max_id = err; + + dev_dbg(bpmp->dev, "maximum powergate ID: %u\n", max_id); + + powergates = kcalloc(max_id + 1, sizeof(*powergates), GFP_KERNEL); + if (!powergates) + return -ENOMEM; + + for (id = 0; id <= max_id; id++) { + struct tegra_powergate_info *info = &powergates[count]; + + info->name = tegra_bpmp_powergate_get_name(bpmp, id); + if (!info->name || info->name[0] == '\0') { + num_holes++; + continue; + } + + info->id = id; + count++; + } + + dev_dbg(bpmp->dev, "holes: %u\n", num_holes); + + *powergatesp = powergates; + + return count; +} + +static int tegra_bpmp_add_powergates(struct tegra_bpmp *bpmp, + struct tegra_powergate_info *powergates, + unsigned int count) +{ + struct genpd_onecell_data *genpd = &bpmp->genpd; + struct generic_pm_domain **domains; + struct tegra_powergate *powergate; + unsigned int i; + int err; + + domains = kcalloc(count, sizeof(*domains), GFP_KERNEL); + if (!domains) + return -ENOMEM; + + for (i = 0; i < count; i++) { + powergate = tegra_powergate_add(bpmp, &powergates[i]); + if (IS_ERR(powergate)) { + err = PTR_ERR(powergate); + goto remove; + } + + dev_dbg(bpmp->dev, "added power domain %s\n", + powergate->genpd.name); + domains[i] = &powergate->genpd; + } + + genpd->num_domains = count; + genpd->domains = domains; + + return 0; + +remove: + while (i--) { + powergate = to_tegra_powergate(domains[i]); + tegra_powergate_remove(powergate); + } + + kfree(genpd->domains); + return err; +} + +static void tegra_bpmp_remove_powergates(struct tegra_bpmp *bpmp) +{ + struct genpd_onecell_data *genpd = &bpmp->genpd; + unsigned int i = genpd->num_domains; + struct tegra_powergate *powergate; + + while (i--) { + dev_dbg(bpmp->dev, "removing power domain %s\n", + genpd->domains[i]->name); + powergate = to_tegra_powergate(genpd->domains[i]); + tegra_powergate_remove(powergate); + } +} + +static struct generic_pm_domain * +tegra_powergate_xlate(struct of_phandle_args *spec, void *data) +{ + struct generic_pm_domain *domain = ERR_PTR(-ENOENT); + struct genpd_onecell_data *genpd = data; + unsigned int i; + + for (i = 0; i < genpd->num_domains; i++) { + struct tegra_powergate *powergate; + + powergate = to_tegra_powergate(genpd->domains[i]); + if (powergate->id == spec->args[0]) { + domain = &powergate->genpd; + break; + } + } + + return domain; +} + +int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp) +{ + struct device_node *np = bpmp->dev->of_node; + struct tegra_powergate_info *powergates; + struct device *dev = bpmp->dev; + unsigned int count, i; + int err; + + err = tegra_bpmp_probe_powergates(bpmp, &powergates); + if (err < 0) + return err; + + count = err; + + dev_dbg(dev, "%u power domains probed\n", count); + + err = tegra_bpmp_add_powergates(bpmp, powergates, count); + if (err < 0) + goto free; + + bpmp->genpd.xlate = tegra_powergate_xlate; + + err = of_genpd_add_provider_onecell(np, &bpmp->genpd); + if (err < 0) { + dev_err(dev, "failed to add power domain provider: %d\n", err); + tegra_bpmp_remove_powergates(bpmp); + } + +free: + for (i = 0; i < count; i++) + kfree(powergates[i].name); + + kfree(powergates); + return err; +} diff --git a/include/dt-bindings/power/mt6797-power.h b/include/dt-bindings/power/mt6797-power.h new file mode 100644 index 000000000000..a60c1d81cf75 --- /dev/null +++ b/include/dt-bindings/power/mt6797-power.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_POWER_MT6797_POWER_H +#define _DT_BINDINGS_POWER_MT6797_POWER_H + +#define MT6797_POWER_DOMAIN_VDEC 0 +#define MT6797_POWER_DOMAIN_VENC 1 +#define MT6797_POWER_DOMAIN_ISP 2 +#define MT6797_POWER_DOMAIN_MM 3 +#define MT6797_POWER_DOMAIN_AUDIO 4 +#define MT6797_POWER_DOMAIN_MFG_ASYNC 5 +#define MT6797_POWER_DOMAIN_MFG 6 +#define MT6797_POWER_DOMAIN_MFG_CORE0 7 +#define MT6797_POWER_DOMAIN_MFG_CORE1 8 +#define MT6797_POWER_DOMAIN_MFG_CORE2 9 +#define MT6797_POWER_DOMAIN_MFG_CORE3 10 +#define MT6797_POWER_DOMAIN_MJC 11 + +#endif /* _DT_BINDINGS_POWER_MT6797_POWER_H */ diff --git a/include/dt-bindings/reset/altr,rst-mgr-s10.h b/include/dt-bindings/reset/altr,rst-mgr-s10.h new file mode 100644 index 000000000000..7978c21e4fad --- /dev/null +++ b/include/dt-bindings/reset/altr,rst-mgr-s10.h @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2016 Intel Corporation. All rights reserved + * Copyright (C) 2016 Altera Corporation. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + * derived from Steffen Trumtrar's "altr,rst-mgr-a10.h" + */ + +#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H +#define _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H + +/* MPUMODRST */ +#define CPU0_RESET 0 +#define CPU1_RESET 1 +#define CPU2_RESET 2 +#define CPU3_RESET 3 + +/* PER0MODRST */ +#define EMAC0_RESET 32 +#define EMAC1_RESET 33 +#define EMAC2_RESET 34 +#define USB0_RESET 35 +#define USB1_RESET 36 +#define NAND_RESET 37 +/* 38 is empty */ +#define SDMMC_RESET 39 +#define EMAC0_OCP_RESET 40 +#define EMAC1_OCP_RESET 41 +#define EMAC2_OCP_RESET 42 +#define USB0_OCP_RESET 43 +#define USB1_OCP_RESET 44 +#define NAND_OCP_RESET 45 +/* 46 is empty */ +#define SDMMC_OCP_RESET 47 +#define DMA_RESET 48 +#define SPIM0_RESET 49 +#define SPIM1_RESET 50 +#define SPIS0_RESET 51 +#define SPIS1_RESET 52 +#define DMA_OCP_RESET 53 +#define EMAC_PTP_RESET 54 +/* 55 is empty*/ +#define DMAIF0_RESET 56 +#define DMAIF1_RESET 57 +#define DMAIF2_RESET 58 +#define DMAIF3_RESET 59 +#define DMAIF4_RESET 60 +#define DMAIF5_RESET 61 +#define DMAIF6_RESET 62 +#define DMAIF7_RESET 63 + +/* PER1MODRST */ +#define WATCHDOG0_RESET 64 +#define WATCHDOG1_RESET 65 +#define WATCHDOG2_RESET 66 +#define WATCHDOG3_RESET 67 +#define L4SYSTIMER0_RESET 68 +#define L4SYSTIMER1_RESET 69 +#define SPTIMER0_RESET 70 +#define SPTIMER1_RESET 71 +#define I2C0_RESET 72 +#define I2C1_RESET 73 +#define I2C2_RESET 74 +#define I2C3_RESET 75 +#define I2C4_RESET 76 +/* 77-79 is empty */ +#define UART0_RESET 80 +#define UART1_RESET 81 +/* 82-87 is empty */ +#define GPIO0_RESET 88 +#define GPIO1_RESET 89 + +/* BRGMODRST */ +#define SOC2FPGA_RESET 96 +#define LWHPS2FPGA_RESET 97 +#define FPGA2SOC_RESET 98 +#define F2SSDRAM0_RESET 99 +#define F2SSDRAM1_RESET 100 +#define F2SSDRAM2_RESET 101 +#define DDRSCH_RESET 102 + +/* COLDMODRST */ +#define CPUPO0_RESET 160 +#define CPUPO1_RESET 161 +#define CPUPO2_RESET 162 +#define CPUPO3_RESET 163 +/* 164-167 is empty */ +#define L2_RESET 168 + +/* DBGMODRST */ +#define DBG_RESET 224 +#define CSDAP_RESET 225 + +/* TAPMODRST */ +#define TAP_RESET 256 + +#endif diff --git a/include/dt-bindings/reset/cortina,gemini-reset.h b/include/dt-bindings/reset/cortina,gemini-reset.h new file mode 100644 index 000000000000..0b886aee65e3 --- /dev/null +++ b/include/dt-bindings/reset/cortina,gemini-reset.h @@ -0,0 +1,36 @@ +#ifndef _DT_BINDINGS_RESET_CORTINA_GEMINI_H +#define _DT_BINDINGS_RESET_CORTINA_GEMINI_H + +#define GEMINI_RESET_DRAM 0 +#define GEMINI_RESET_FLASH 1 +#define GEMINI_RESET_IDE 2 +#define GEMINI_RESET_RAID 3 +#define GEMINI_RESET_SECURITY 4 +#define GEMINI_RESET_GMAC0 5 +#define GEMINI_RESET_GMAC1 6 +#define GEMINI_RESET_PCI 7 +#define GEMINI_RESET_USB0 8 +#define GEMINI_RESET_USB1 9 +#define GEMINI_RESET_DMAC 10 +#define GEMINI_RESET_APB 11 +#define GEMINI_RESET_LPC 12 +#define GEMINI_RESET_LCD 13 +#define GEMINI_RESET_INTCON0 14 +#define GEMINI_RESET_INTCON1 15 +#define GEMINI_RESET_RTC 16 +#define GEMINI_RESET_TIMER 17 +#define GEMINI_RESET_UART 18 +#define GEMINI_RESET_SSP 19 +#define GEMINI_RESET_GPIO0 20 +#define GEMINI_RESET_GPIO1 21 +#define GEMINI_RESET_GPIO2 22 +#define GEMINI_RESET_WDOG 23 +#define GEMINI_RESET_EXTERN 24 +#define GEMINI_RESET_CIR 25 +#define GEMINI_RESET_SATA0 26 +#define GEMINI_RESET_SATA1 27 +#define GEMINI_RESET_TVC 28 +#define GEMINI_RESET_CPU1 30 +#define GEMINI_RESET_GLOBAL 31 + +#endif diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index b7803a251044..41004d97cefa 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -206,9 +206,13 @@ static inline void pm_genpd_syscore_poweron(struct device *dev) {} /* OF PM domain providers */ struct of_device_id; +typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args, + void *data); + struct genpd_onecell_data { struct generic_pm_domain **domains; unsigned int num_domains; + genpd_xlate_t xlate; }; #ifdef CONFIG_PM_GENERIC_DOMAINS_OF diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h index dc5f989be226..327d65663dbf 100644 --- a/include/linux/scpi_protocol.h +++ b/include/linux/scpi_protocol.h @@ -67,6 +67,9 @@ struct scpi_ops { int (*dvfs_get_idx)(u8); int (*dvfs_set_idx)(u8, u8); struct scpi_dvfs_info *(*dvfs_get_info)(u8); + int (*device_domain_id)(struct device *); + int (*get_transition_latency)(struct device *); + int (*add_opps_to_device)(struct device *); int (*sensor_get_capability)(u16 *sensors); int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *); int (*sensor_get_value)(u16, u64 *); diff --git a/include/linux/soc/renesas/rcar-rst.h b/include/linux/soc/renesas/rcar-rst.h index 787e7ad53d45..2c231f2280a6 100644 --- a/include/linux/soc/renesas/rcar-rst.h +++ b/include/linux/soc/renesas/rcar-rst.h @@ -1,8 +1,7 @@ #ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__ #define __LINUX_SOC_RENESAS_RCAR_RST_H__ -#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \ - defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796) +#ifdef CONFIG_RST_RCAR int rcar_rst_read_mode_pins(u32 *mode); #else static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; } diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h index 0aaef5960e29..98d8d38b99a1 100644 --- a/include/soc/tegra/bpmp-abi.h +++ b/include/soc/tegra/bpmp-abi.h @@ -81,13 +81,18 @@ * Provides the MRQ number for the MRQ message: #mrq. The remainder of * the MRQ message is a payload (immediately following the * mrq_request) whose format depends on mrq. - * - * @todo document the flags */ struct mrq_request { /** @brief MRQ number of the request */ uint32_t mrq; - /** @brief flags for the request */ + /** + * @brief flags providing follow up directions to the receiver + * + * | Bit | Description | + * |-----|--------------------------------------------| + * | 1 | ring the sender's doorbell when responding | + * | 0 | should be 1 | + */ uint32_t flags; } __ABI_PACKED; @@ -99,13 +104,11 @@ struct mrq_request { * remainder of the MRQ response is a payload (immediately following * the mrq_response) whose format depends on the associated * mrq_request::mrq - * - * @todo document the flags */ struct mrq_response { /** @brief error code for the MRQ request itself */ int32_t err; - /** @brief flags for the response */ + /** @brief reserved for future use */ uint32_t flags; } __ABI_PACKED; @@ -147,6 +150,8 @@ struct mrq_response { #define MRQ_ABI_RATCHET 29 #define MRQ_EMC_DVFS_LATENCY 31 #define MRQ_TRACE_ITER 64 +#define MRQ_RINGBUF_CONSOLE 65 +#define MRQ_PG 66 /** @} */ @@ -155,7 +160,7 @@ struct mrq_response { * @brief Maximum MRQ code to be sent by CPU software to * BPMP. Subject to change in future */ -#define MAX_CPU_MRQ_ID 64 +#define MAX_CPU_MRQ_ID 66 /** * @addtogroup MRQ_Payloads Message Payloads @@ -175,6 +180,7 @@ struct mrq_response { * @defgroup Vhint CPU Voltage hint * @defgroup MRQ_Deprecated Deprecated MRQ messages * @defgroup EMC + * @defgroup RingbufConsole * @} */ @@ -637,7 +643,7 @@ struct mrq_debugfs_response { * * Initiators: Any * * Targets: BPMP * * Request Payload: @ref mrq_reset_request - * * Response Payload: N/A + * * Response Payload: @ref mrq_reset_response */ /** @@ -647,6 +653,7 @@ enum mrq_reset_commands { CMD_RESET_ASSERT = 1, CMD_RESET_DEASSERT = 2, CMD_RESET_MODULE = 3, + CMD_RESET_GET_MAX_ID = 4, CMD_RESET_MAX, /* not part of ABI and subject to change */ }; @@ -665,6 +672,38 @@ struct mrq_reset_request { } __ABI_PACKED; /** + * @ingroup Reset + * @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When + * this sub-command is not supported, firmware will return -BPMP_EBADCMD + * in mrq_response::err. + */ +struct cmd_reset_get_max_id_response { + /** @brief max reset id */ + uint32_t max_id; +} __ABI_PACKED; + +/** + * @ingroup Reset + * @brief Response with MRQ_RESET + * + * Each sub-command supported by @ref mrq_reset_request may return + * sub-command-specific data. Some do and some do not as indicated + * in the following table + * + * | sub-command | payload | + * |----------------------|------------------| + * | CMD_RESET_ASSERT | - | + * | CMD_RESET_DEASSERT | - | + * | CMD_RESET_MODULE | - | + * | CMD_RESET_GET_MAX_ID | reset_get_max_id | + */ +struct mrq_reset_response { + union { + struct cmd_reset_get_max_id_response reset_get_max_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** * @ingroup MRQ_Codes * @def MRQ_I2C * @brief issue an i2c transaction @@ -812,6 +851,17 @@ enum { }; /** @} */ +/** + * @name MRQ_CLK properties + * Flag bits for cmd_clk_properties_response::flags and + * cmd_clk_get_all_info_response::flags + * @{ + */ +#define BPMP_CLK_HAS_MUX (1 << 0) +#define BPMP_CLK_HAS_SET_RATE (1 << 1) +#define BPMP_CLK_IS_ROOT (1 << 2) +/** @} */ + #define MRQ_CLK_NAME_MAXLEN 40 #define MRQ_CLK_MAX_PARENTS 16 @@ -1010,7 +1060,7 @@ struct mrq_clk_response { * * * Platforms: All * * Initiators: Any - * * Targets: Any + * * Targets: Any except DMCE * * Request Payload: @ref mrq_query_abi_request * * Response Payload: @ref mrq_query_abi_response */ @@ -1030,6 +1080,9 @@ struct mrq_query_abi_request { /** * @ingroup ABI_info * @brief response to MRQ_QUERY_ABI + * + * @note mrq_response::err of 0 indicates that the query was + * successful, not that the MRQ itself is supported! */ struct mrq_query_abi_response { /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */ @@ -1080,7 +1133,9 @@ struct mrq_pg_read_state_response { /** * @ingroup MRQ_Codes * @def MRQ_PG_UPDATE_STATE - * @brief modify the power-gating state of a partition + * @brief modify the power-gating state of a partition. In contrast to + * MRQ_PG calls, the operations that change state (on/off) of power + * partition are reference counted. * * * Platforms: T186 * * Initiators: Any @@ -1126,6 +1181,171 @@ struct mrq_pg_update_state_request { /** * @ingroup MRQ_Codes + * @def MRQ_PG + * @brief Control power-gating state of a partition. In contrast to + * MRQ_PG_UPDATE_STATE, operations that change the power partition + * state are NOT reference counted + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pg_request + * * Response Payload: @ref mrq_pg_response + * @addtogroup Powergating + * @{ + */ + +/** + * @name MRQ_PG sub-commands + * @{ + */ +enum mrq_pg_cmd { + /** + * @brief Check whether the BPMP driver supports the specified + * request type + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_PG_QUERY_ABI = 0, + + /** + * @brief Set the current state of specified power domain. The + * possible values for power domains are defined in enum + * pg_states + * + * mrq_response:err is + * 0: Success + * -#BPMP_EINVAL: Invalid request parameters + */ + CMD_PG_SET_STATE = 1, + + /** + * @brief Get the current state of specified power domain. The + * possible values for power domains are defined in enum + * pg_states + * + * mrq_response:err is + * 0: Success + * -#BPMP_EINVAL: Invalid request parameters + */ + CMD_PG_GET_STATE = 2, + + /** + * @brief get the name string of specified power domain id. + * + * mrq_response:err is + * 0: Success + * -#BPMP_EINVAL: Invalid request parameters + */ + CMD_PG_GET_NAME = 3, + + + /** + * @brief get the highest power domain id in the system. Not + * all IDs between 0 and max_id are valid IDs. + * + * mrq_response:err is + * 0: Success + * -#BPMP_EINVAL: Invalid request parameters + */ + CMD_PG_GET_MAX_ID = 4, +}; +/** @} */ + +#define MRQ_PG_NAME_MAXLEN 40 + +/** + * @brief possible power domain states in + * cmd_pg_set_state_request:state and cmd_pg_get_state_response:state. + * PG_STATE_OFF: power domain is OFF + * PG_STATE_ON: power domain is ON + * PG_STATE_RUNNING: power domain is ON and made into directly usable + * state by turning on the clocks associated with + * the domain + */ +enum pg_states { + PG_STATE_OFF = 0, + PG_STATE_ON = 1, + PG_STATE_RUNNING = 2, +}; + +struct cmd_pg_query_abi_request { + uint32_t type; /* enum mrq_pg_cmd */ +} __ABI_PACKED; + +struct cmd_pg_set_state_request { + uint32_t state; /* enum pg_states */ +} __ABI_PACKED; + +struct cmd_pg_get_state_response { + uint32_t state; /* enum pg_states */ +} __ABI_PACKED; + +struct cmd_pg_get_name_response { + uint8_t name[MRQ_PG_NAME_MAXLEN]; +} __ABI_PACKED; + +struct cmd_pg_get_max_id_response { + uint32_t max_id; +} __ABI_PACKED; + +/** + * @ingroup Powergating + * @brief request with #MRQ_PG + * + * Used by the sender of an #MRQ_PG message to control power + * partitions. The pg_request is split into several sub-commands. Some + * sub-commands require no additional data. Others have a sub-command + * specific payload + * + * |sub-command |payload | + * |----------------------------|-----------------------| + * |CMD_PG_QUERY_ABI | query_abi | + * |CMD_PG_SET_STATE | set_state | + * |CMD_PG_GET_STATE | - | + * |CMD_PG_GET_NAME | - | + * |CMD_PG_GET_MAX_ID | - | + * + */ + +struct mrq_pg_request { + uint32_t cmd; + uint32_t id; + union { + struct cmd_pg_query_abi_request query_abi; + struct cmd_pg_set_state_request set_state; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup Powergating + * @brief response to MRQ_PG + * + * Each sub-command supported by @ref mrq_pg_request may return + * sub-command-specific data. Some do and some do not as indicated in + * the following table + * + * |sub-command |payload | + * |----------------------------|-----------------------| + * |CMD_PG_QUERY_ABI | - | + * |CMD_PG_SET_STATE | - | + * |CMD_PG_GET_STATE | get_state | + * |CMD_PG_GET_NAME | get_name | + * |CMD_PG_GET_MAX_ID | get_max_id | + * + */ + +struct mrq_pg_response { + union { + struct cmd_pg_get_state_response get_state; + struct cmd_pg_get_name_response get_name; + struct cmd_pg_get_max_id_response get_max_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes * @def MRQ_THERMAL * @brief interact with BPMP thermal framework * @@ -1529,6 +1749,184 @@ struct mrq_trace_iter_request { /** @} */ +/** + * @ingroup MRQ_Codes + * @def MRQ_RINGBUF_CONSOLE + * @brief A ring buffer debug console for BPMP + * @addtogroup RingbufConsole + * + * The ring buffer debug console aims to be a substitute for the UART debug + * console. The debug console is implemented with two ring buffers in the + * BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read + * and written to the buffers by the host via the MRQ interface. + * + * @{ + */ + +/** + * @brief Maximum number of bytes transferred in a single write command to the + * BPMP + * + * This is determined by the number of free bytes in the message struct, + * rounded down to a multiple of four. + */ +#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112 + +/** + * @brief Maximum number of bytes transferred in a single read command to the + * BPMP + * + * This is determined by the number of free bytes in the message struct, + * rounded down to a multiple of four. + */ +#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116 + +enum mrq_ringbuf_console_host_to_bpmp_cmd { + /** + * @brief Check whether the BPMP driver supports the specified request + * type + * + * mrq_response::err is 0 if the specified request is supported and + * -#BPMP_ENODEV otherwise + */ + CMD_RINGBUF_CONSOLE_QUERY_ABI = 0, + /** + * @brief Perform a read operation on the BPMP TX buffer + * + * mrq_response::err is 0 + */ + CMD_RINGBUF_CONSOLE_READ = 1, + /** + * @brief Perform a write operation on the BPMP RX buffer + * + * mrq_response::err is 0 if the operation was successful and + * -#BPMP_ENODEV otherwise + */ + CMD_RINGBUF_CONSOLE_WRITE = 2, + /** + * @brief Get the length of the buffer and the physical addresses of + * the buffer data and the head and tail counters + * + * mrq_response::err is 0 if the operation was successful and + * -#BPMP_ENODEV otherwise + */ + CMD_RINGBUF_CONSOLE_GET_FIFO = 3, +}; + +/** + * @ingroup RingbufConsole + * @brief Host->BPMP request data for request type + * #CMD_RINGBUF_CONSOLE_QUERY_ABI + */ +struct cmd_ringbuf_console_query_abi_req { + /** @brief Command identifier to be queried */ + uint32_t cmd; +} __ABI_PACKED; + +/** @private */ +struct cmd_ringbuf_console_query_abi_resp { + EMPTY +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ + */ +struct cmd_ringbuf_console_read_req { + /** + * @brief Number of bytes requested to be read from the BPMP TX buffer + */ + uint8_t len; +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ + */ +struct cmd_ringbuf_console_read_resp { + /** @brief The actual data read from the BPMP TX buffer */ + uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN]; + /** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */ + uint8_t len; +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE + */ +struct cmd_ringbuf_console_write_req { + /** @brief The actual data to be written to the BPMP RX buffer */ + uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN]; + /** @brief Number of bytes in cmd_ringbuf_console_write_req::data */ + uint8_t len; +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE + */ +struct cmd_ringbuf_console_write_resp { + /** @brief Number of bytes of available space in the BPMP RX buffer */ + uint32_t space_avail; + /** @brief Number of bytes that were written to the BPMP RX buffer */ + uint8_t len; +} __ABI_PACKED; + +/** @private */ +struct cmd_ringbuf_console_get_fifo_req { + EMPTY +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO + */ +struct cmd_ringbuf_console_get_fifo_resp { + /** @brief Physical address of the BPMP TX buffer */ + uint64_t bpmp_tx_buf_addr; + /** @brief Physical address of the BPMP TX buffer head counter */ + uint64_t bpmp_tx_head_addr; + /** @brief Physical address of the BPMP TX buffer tail counter */ + uint64_t bpmp_tx_tail_addr; + /** @brief Length of the BPMP TX buffer */ + uint32_t bpmp_tx_buf_len; +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief Host->BPMP request data. + * + * Reply type is union #mrq_ringbuf_console_bpmp_to_host_response . + */ +struct mrq_ringbuf_console_host_to_bpmp_request { + /** + * @brief type of request. Values listed in enum + * #mrq_ringbuf_console_host_to_bpmp_cmd. + */ + uint32_t type; + /** @brief request type specific parameters. */ + union { + struct cmd_ringbuf_console_query_abi_req query_abi; + struct cmd_ringbuf_console_read_req read; + struct cmd_ringbuf_console_write_req write; + struct cmd_ringbuf_console_get_fifo_req get_fifo; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup RingbufConsole + * @brief Host->BPMP reply data + * + * In response to struct #mrq_ringbuf_console_host_to_bpmp_request. + */ +union mrq_ringbuf_console_bpmp_to_host_response { + struct cmd_ringbuf_console_query_abi_resp query_abi; + struct cmd_ringbuf_console_read_resp read; + struct cmd_ringbuf_console_write_resp write; + struct cmd_ringbuf_console_get_fifo_resp get_fifo; +} __ABI_PACKED; +/** @} */ + /* * 4. Enumerations */ diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h index 13dcd44e91bb..9ba65222bd3f 100644 --- a/include/soc/tegra/bpmp.h +++ b/include/soc/tegra/bpmp.h @@ -15,6 +15,7 @@ #define __SOC_TEGRA_BPMP_H #include <linux/mailbox_client.h> +#include <linux/pm_domain.h> #include <linux/reset-controller.h> #include <linux/semaphore.h> #include <linux/types.h> @@ -91,6 +92,8 @@ struct tegra_bpmp { unsigned int num_clocks; struct reset_controller_dev rstc; + + struct genpd_onecell_data genpd; }; struct tegra_bpmp *tegra_bpmp_get(struct device *dev); @@ -138,4 +141,13 @@ static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp) } #endif +#if IS_ENABLED(CONFIG_SOC_TEGRA_POWERGATE_BPMP) +int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp); +#else +static inline int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp) +{ + return 0; +} +#endif + #endif /* __SOC_TEGRA_BPMP_H */ |