diff options
author | Geoffrey Wossum <geoffrey@pager.net> | 2008-06-05 13:49:34 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2008-06-06 11:54:38 +0200 |
commit | 9aaca9683b014c4d718f32cbddb42e5b36ea3c0f (patch) | |
tree | 68b5817eae0ccd0fbb549d1e8f5184d4ffbb3834 | |
parent | f10485e79882bf09cf442a673511154987b43e3b (diff) | |
download | linux-9aaca9683b014c4d718f32cbddb42e5b36ea3c0f.tar.bz2 |
[ALSA] Revised AT32 ASoC Patch
Attached is a revised version of my patch to add AT32 to ASoC. This cleans
most of the style issues associated with the previous patch. Also fixes an
issue with the playpaq_wm8510.c code depending on a non-released patch to th
AT32 portmux support.
Patch is against 2.6.24.3.atmel.3 kernel, the latest AVR32 kernel Atmel has
released, with the linux-2.6-asoc patches from when v2.6.24 was tagged also
applied.
[Fixed up minor checkpatch issues and updated for current kernels -- broonie]
Signed-off-by: Geoffrey Wossum <gwossum@acm.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-rw-r--r-- | sound/soc/Kconfig | 1 | ||||
-rw-r--r-- | sound/soc/Makefile | 3 | ||||
-rw-r--r-- | sound/soc/at32/Kconfig | 34 | ||||
-rw-r--r-- | sound/soc/at32/Makefile | 11 | ||||
-rw-r--r-- | sound/soc/at32/at32-pcm.c | 491 | ||||
-rw-r--r-- | sound/soc/at32/at32-pcm.h | 79 | ||||
-rw-r--r-- | sound/soc/at32/at32-ssc.c | 849 | ||||
-rw-r--r-- | sound/soc/at32/at32-ssc.h | 59 | ||||
-rw-r--r-- | sound/soc/at32/playpaq_wm8510.c | 524 |
9 files changed, 2050 insertions, 1 deletions
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index fd7bc4f89072..b939e22db7b4 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -22,6 +22,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's +source "sound/soc/at32/Kconfig" source "sound/soc/at91/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 782db2127108..3645f959c264 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,4 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ omap/ +obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += omap/ diff --git a/sound/soc/at32/Kconfig b/sound/soc/at32/Kconfig new file mode 100644 index 000000000000..b0765e86c085 --- /dev/null +++ b/sound/soc/at32/Kconfig @@ -0,0 +1,34 @@ +config SND_AT32_SOC + tristate "SoC Audio for the Atmel AT32 System-on-a-Chip" + depends on AVR32 && SND_SOC + help + Say Y or M if you want to add support for codecs attached to + the AT32 SSC interface. You will also need to + to select the audio interfaces to support below. + + +config SND_AT32_SOC_SSC + tristate + + + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_AT32_SOC && BOARD_PLAYPAQ + select SND_AT32_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + + + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/at32/Makefile b/sound/soc/at32/Makefile new file mode 100644 index 000000000000..c03e55ececeb --- /dev/null +++ b/sound/soc/at32/Makefile @@ -0,0 +1,11 @@ +# AT32 Platform Support +snd-soc-at32-objs := at32-pcm.o +snd-soc-at32-ssc-objs := at32-ssc.o + +obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o +obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c new file mode 100644 index 000000000000..cf76e89fae6e --- /dev/null +++ b/sound/soc/at32/at32-pcm.c @@ -0,0 +1,491 @@ +/* sound/soc/at32/at32-pcm.c + * ASoC PCM interface for Atmel AT32 SoC + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that this is basically a port of the sound/soc/at91-pcm.c to + * the AVR32 kernel. Thanks to Frank Mandarino for that code. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include "at32-pcm.h" + + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware at32_pcm_hardware = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE), + + .formats = SNDRV_PCM_FMTBIT_S16, + .period_bytes_min = 32, + .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */ + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct at32_runtime_data { + struct at32_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of DMA buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* Save PDC registers (for power management) */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *dmabuf = &substream->dma_buffer; + size_t size = at32_pcm_hardware.buffer_bytes_max; + + dmabuf->dev.type = SNDRV_DMA_TYPE_DEV; + dmabuf->dev.dev = pcm->card->dev; + dmabuf->private_data = NULL; + dmabuf->area = dma_alloc_coherent(pcm->card->dev, size, + &dmabuf->addr, GFP_KERNEL); + pr_debug("at32_pcm: preallocate_dma_buffer: " + "area=%p, addr=%p, size=%ld\n", + (void *)dmabuf->area, (void *)dmabuf->addr, size); + + if (!dmabuf->area) + return -ENOMEM; + + dmabuf->bytes = size; + return 0; +} + + + +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct at32_runtime_data *prtd = rtd->private_data; + struct at32_pcm_dma_params *params = prtd->params; + static int count; + + count++; + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + "underrun" : "overrun", params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + + snd_pcm_period_elapsed(substream); +} + + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int at32_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct at32_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params + */ + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = at32_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("hw_params: DMA for %s initialized " + "(dma_bytes=%ld, period_size=%ld)\n", + prtd->params->name, runtime->dma_bytes, prtd->period_size); + + return 0; +} + + + +static int at32_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct at32_runtime_data *prtd = substream->runtime->private_data; + struct at32_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + + + +static int at32_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct at32_runtime_data *prtd = substream->runtime->private_data; + struct at32_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + + return 0; +} + + +static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct at32_runtime_data *prtd = rtd->private_data; + struct at32_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("at32_pcm_trigger: buffer_size = %ld, " + "dma_area = %p, dma_bytes = %ld\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("trigger: period_ptr=%lx, xpr=%x, " + "xcr=%d, xnpr=%x, xncr=%d\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%x, imr=%x\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + + + +static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct at32_runtime_data *prtd = runtime->private_data; + struct at32_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + + + +static int at32_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct at32_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + +out: + return ret; +} + + + +static int at32_pcm_close(struct snd_pcm_substream *substream) +{ + struct at32_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + + +static int at32_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + + + +static struct snd_pcm_ops at32_pcm_ops = { + .open = at32_pcm_open, + .close = at32_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = at32_pcm_hw_params, + .hw_free = at32_pcm_hw_free, + .prepare = at32_pcm_prepare, + .trigger = at32_pcm_trigger, + .pointer = at32_pcm_pointer, + .mmap = at32_pcm_mmap, +}; + + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 at32_pcm_dmamask = 0xffffffff; + +static int at32_pcm_new(struct snd_card *card, + struct snd_soc_codec_dai *dai, + struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &at32_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = at32_pcm_preallocate_dma_buffer( + pcm, SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n"); + ret = at32_pcm_preallocate_dma_buffer( + pcm, SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + + +out: + return ret; +} + + + +static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (substream == NULL) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + + + +#ifdef CONFIG_PM +static int at32_pcm_suspend(struct platform_device *pdev, + struct snd_soc_cpu_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct at32_runtime_data *prtd; + struct at32_pcm_dma_params *params; + + if (runtime == NULL) + return 0; + prtd = runtime->private_data; + params = prtd->params; + + /* Disable the PDC and save the PDC registers */ + ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + + + +static int at32_pcm_resume(struct platform_device *pdev, + struct snd_soc_cpu_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct at32_runtime_data *prtd; + struct at32_pcm_dma_params *params; + + if (runtime == NULL) + return 0; + prtd = runtime->private_data; + params = prtd->params; + + /* Restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else /* CONFIG_PM */ +# define at32_pcm_suspend NULL +# define at32_pcm_resume NULL +#endif /* CONFIG_PM */ + + + +struct snd_soc_platform at32_soc_platform = { + .name = "at32-audio", + .pcm_ops = &at32_pcm_ops, + .pcm_new = at32_pcm_new, + .pcm_free = at32_pcm_free_dma_buffers, + .suspend = at32_pcm_suspend, + .resume = at32_pcm_resume, +}; +EXPORT_SYMBOL_GPL(at32_soc_platform); + + + +MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); +MODULE_DESCRIPTION("Atmel AT32 PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-pcm.h b/sound/soc/at32/at32-pcm.h new file mode 100644 index 000000000000..2a52430417da --- /dev/null +++ b/sound/soc/at32/at32-pcm.h @@ -0,0 +1,79 @@ +/* sound/soc/at32/at32-pcm.h + * ASoC PCM interface for Atmel AT32 SoC + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SOUND_SOC_AT32_AT32_PCM_H +#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__ + +#include <linux/atmel-ssc.h> + + +/* + * Registers and status bits that are required by the PCM driver + * TODO: Is ptcr really used? + */ +struct at32_pdc_regs { + u32 xpr; /* PDC RX/TX pointer */ + u32 xcr; /* PDC RX/TX counter */ + u32 xnpr; /* PDC next RX/TX pointer */ + u32 xncr; /* PDC next RX/TX counter */ + u32 ptcr; /* PDC transfer control */ +}; + + + +/* + * SSC mask info + */ +struct at32_ssc_mask { + u32 ssc_enable; /* SSC RX/TX enable */ + u32 ssc_disable; /* SSC RX/TX disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */ + u32 pdc_enable; /* PDC RX/TX enable */ + u32 pdc_disable; /* PDC RX/TX disable */ +}; + + + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct at32_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct at32_pdc_regs *pdc; /* PDC register info */ + struct at32_ssc_mask *mask; /* SSC mask info */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler) (u32, struct snd_pcm_substream *); +}; + + + +/* + * The AT32 ASoC platform driver + */ +extern struct snd_soc_platform at32_soc_platform; + + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* __SOUND_SOC_AT32_AT32_PCM_H */ diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c new file mode 100644 index 000000000000..0ca44107f183 --- /dev/null +++ b/sound/soc/at32/at32-ssc.c @@ -0,0 +1,849 @@ +/* sound/soc/at32/at32-ssc.c + * ASoC platform driver for AT32 using SSC as DAI + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that this is basically a port of the sound/soc/at91-ssc.c to + * the AVR32 kernel. Thanks to Frank Mandarino for that code. + */ + +/* #define DEBUG */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "at32-pcm.h" +#include "at32-ssc.h" + + + +/*-------------------------------------------------------------------------*\ + * Constants +\*-------------------------------------------------------------------------*/ +#define NUM_SSC_DEVICES 3 + +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + + + +/*-------------------------------------------------------------------------*\ + * Module data +\*-------------------------------------------------------------------------*/ +/* + * SSC PDC registered required by the PCM DMA engine + */ +static struct at32_pdc_regs pdc_tx_reg = { + .xpr = SSC_PDC_TPR, + .xcr = SSC_PDC_TCR, + .xnpr = SSC_PDC_TNPR, + .xncr = SSC_PDC_TNCR, +}; + + + +static struct at32_pdc_regs pdc_rx_reg = { + .xpr = SSC_PDC_RPR, + .xcr = SSC_PDC_RCR, + .xnpr = SSC_PDC_RNPR, + .xncr = SSC_PDC_RNCR, +}; + + + +/* + * SSC and PDC status bits for transmit and receive + */ +static struct at32_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), + .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), +}; + + + +static struct at32_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), + .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), +}; + + + +/* + * DMA parameters for each SSC + */ +static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + { + { + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, + { + { + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, + { + { + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + }, + }, +}; + + + +static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +}; + + + + +/*-------------------------------------------------------------------------*\ + * ISR +\*-------------------------------------------------------------------------*/ +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt + * handler in the PCM driver. + */ +static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) +{ + struct at32_ssc_info *ssc_p = dev_id; + struct at32_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & + ssc_readl(ssc_p->ssc->regs, IMR)); + + /* + * Loop through substreams attached to this SSC. If a DMA-related + * interrupt occured on that substream, call the DMA interrupt + * handler function, if one has been registered in the dma_param + * structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int at32_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + + + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void at32_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct at32_pcm_dma_params *dma_params; + int dir_mask; + + dma_params = ssc_p->dma_params[substream->stream]; + + if (dma_params != NULL) { + ssc_writel(dma_params->ssc->regs, CR, + dma_params->mask->ssc_disable); + pr_debug("%s disabled SSC_SR=0x%08x\n", + (substream->stream ? "receiver" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[substream->stream] = NULL; + } + + + dir_mask = 1 << substream->stream; + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock */ + pr_debug("at32-ssc: Stopping user %d clock\n", + ssc_p->ssc->user); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + /* clear the SSC dividers */ + ssc_p->cmr_div = 0; + ssc_p->tcmr_period = 0; + ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + + +/* + * Set the SSC system clock rate + */ +static int at32_ssc_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + /* TODO: What the heck do I do here? */ + return 0; +} + + + +/* + * Record DAI format for use by hw_params() + */ +static int at32_ssc_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai, + unsigned int fmt) +{ + struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + + + +/* + * Record SSC clock dividers for use in hw_params() + */ +static int at32_ssc_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai, + int div_id, int div) +{ + struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case AT32_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case AT32_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case AT32_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + + + +/* + * Configure the SSC + */ +static int at32_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int id = rtd->dai->cpu_dai->id; + struct at32_ssc_info *ssc_p = &ssc_info[id]; + struct at32_pcm_dma_params *dma_params; + int channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + + /* + * Currently, there is only one set of dma_params for each direction. + * If more are added, this code will have to be changed to select + * the proper set + */ + dma_params = &ssc_dma_params[id][substream->stream]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[substream->stream] = dma_params; + + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the PCM driver's hw_params() + * function. It should not be used for other purposes as it + * is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + + /* + * Determine sample size in bits and the PDC increment + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + + case SNDRV_PCM_FORMAT_S16: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + + case SNDRV_PCM_FORMAT_S24: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + + case SNDRV_PCM_FORMAT_S32: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + + default: + pr_warning("at32-ssc: Unsupported PCM format %d", + params_format(params)); + return -EINVAL; + } + pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", + bits, dma_params->pdc_xfer_size, channels); + + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) + if (bits > 16) { + pr_warning("at32-ssc: " + "sample size %d is too large for I2S\n", + bits); + return -EINVAL; + } + + + /* + * Compute the SSC register settings + */ + switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_MASTER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRS clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output on the SSC TK line + */ + pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); + rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | + SSC_BF(RCMR_STTDLY, START_DELAY) | + SSC_BF(RCMR_START, SSC_START_FALLING_RF) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_DIV)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | + SSC_BF(RFMR_FSLEN, bits - 1) | + SSC_BF(RFMR_DATNB, channels - 1) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | + SSC_BF(TCMR_STTDLY, START_DELAY) | + SSC_BF(TCMR_START, SSC_START_FALLING_RF) | + SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | + SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | + SSC_BF(TCMR_CKS, SSC_CKS_DIV)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | + SSC_BF(TFMR_FSLEN, bits - 1) | + SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | + SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clock. + * + * The SSC transmit clock is obtained from the BCLK signal + * on the TK line, and the SSC receive clock is generated from + * the transmit clock. + * + * For single channel data, one sample is transferred on the + * falling edge of the LRC clock. For two channel data, one + * sample is transferred on both edges of the LRC clock. + */ + pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); + start_event = ((channels == 1) ? + SSC_START_FALLING_RF : SSC_START_EDGE_RF); + + rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | + SSC_BF(RCMR_START, start_event) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | + SSC_BF(TCMR_START, start_event) | + SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | + SSC_BF(TCMR_CKO, SSC_CKO_NONE) | + SSC_BF(TCMR_CKS, SSC_CKS_PIN)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | + SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output on the SSC TK line + */ + pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); + rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | + SSC_BF(RCMR_STTDLY, 1) | + SSC_BF(RCMR_START, SSC_START_RISING_RF) | + SSC_BF(RCMR_CKI, SSC_CKI_RISING) | + SSC_BF(RCMR_CKO, SSC_CKO_NONE) | + SSC_BF(RCMR_CKS, SSC_CKS_DIV)); + + rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | + SSC_BF(RFMR_DATNB, channels - 1) | + SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); + + tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | + SSC_BF(TCMR_STTDLY, 1) | + SSC_BF(TCMR_START, SSC_START_RISING_RF) | + SSC_BF(TCMR_CKI, SSC_CKI_RISING) | + SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | + SSC_BF(TCMR_CKS, SSC_CKS_DIV)); + + tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | + SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | + SSC_BF(TFMR_DATNB, channels - 1) | + SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); + break; + + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + pr_warning("at32-ssc: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + + if (!ssc_p->initialized) { + /* enable peripheral clock */ + pr_debug("at32-ssc: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + pr_warning("at32-ssc: request irq failed (%d)\n", ret); + pr_debug("at32-ssc: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* Set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("at32-ssc: SSC initialized\n"); + return 0; +} + + + +static int at32_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct at32_pcm_dma_params *dma_params; + + dma_params = ssc_p->dma_params[substream->stream]; + + ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); + + return 0; +} + + + +#ifdef CONFIG_PM +static int at32_ssc_suspend(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int at32_ssc_resume(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define at32_ssc_suspend NULL +# define at32_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define AT32_SSC_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + + +#define AT32_SSC_FORMATS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ + SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) + + +struct snd_soc_cpu_dai at32_ssc_dai[NUM_SSC_DEVICES] = { + { + .name = "at32-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[0], + }, + { + .name = "at32-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[1], + }, + { + .name = "at32-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = at32_ssc_suspend, + .resume = at32_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = AT32_SSC_RATES, + .formats = AT32_SSC_FORMATS, + }, + .ops = { + .startup = at32_ssc_startup, + .shutdown = at32_ssc_shutdown, + .prepare = at32_ssc_prepare, + .hw_params = at32_ssc_hw_params, + }, + .dai_ops = { + .set_sysclk = at32_ssc_set_dai_sysclk, + .set_fmt = at32_ssc_set_dai_fmt, + .set_clkdiv = at32_ssc_set_dai_clkdiv, + }, + .private_data = &ssc_info[2], + }, +}; +EXPORT_SYMBOL_GPL(at32_ssc_dai); + + +MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); +MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-ssc.h b/sound/soc/at32/at32-ssc.h new file mode 100644 index 000000000000..3c6901a6c036 --- /dev/null +++ b/sound/soc/at32/at32-ssc.h @@ -0,0 +1,59 @@ +/* sound/soc/at32/at32-ssc.h + * ASoC SSC interface for Atmel AT32 SoC + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SOUND_SOC_AT32_AT32_SSC_H +#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__ + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "at32-pcm.h" + + + +struct at32_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + + +struct at32_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct at32_pcm_dma_params *dma_params[2]; + struct at32_ssc_state ssc_state; +}; + + +/* SSC divider ids */ +#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ + + +extern struct snd_soc_cpu_dai at32_ssc_dai[]; + + + +#endif /* __SOUND_SOC_AT32_AT32_SSC_H */ diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c new file mode 100644 index 000000000000..d6b9fd5e6123 --- /dev/null +++ b/sound/soc/at32/playpaq_wm8510.c @@ -0,0 +1,524 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum@acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/arch/at32ap700x.h> +#include <asm/arch/portmux.h> + +#include "../codecs/wm8510.h" +#include "at32-pcm.h" +#include "at32-ssc.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_cpu_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = codec_dai->dai_ops.set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = cpu_dai->dai_ops.set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = cpu_dai->dai_ops.set_clkdiv(cpu_dai, + AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = cpu_dai->dai_ops.set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = codec_dai->dai_ops.set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = codec_dai->dai_ops.set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = codec_dai->dai_ops.set_clkdiv(codec_dai, + WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const char *intercon[][3] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, + + /* Terminator */ + {NULL, NULL, NULL}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + for (i = 0; intercon[i][0] != NULL; i++) { + snd_soc_dapm_connect_input(codec, + intercon[i][0], + intercon[i][1], intercon[i][2]); + } + + + /* always connected endpoints */ + snd_soc_dapm_set_endpoint(codec, "Int Mic", 1); + snd_soc_dapm_set_endpoint(codec, "Ext Spk", 1); + snd_soc_dapm_sync_endpoints(codec); + + + + /* Make CSB show PLL rate */ + codec->dai->dai_ops.set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + if (ssc != NULL) { + ssc_free(ssc); + ssc = NULL; + } +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); |