diff options
| author | Matthew Hagan <mnhagan88@gmail.com> | 2022-05-02 23:33:15 +0100 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2022-05-03 16:53:39 -0700 |
| commit | 2069624dac19d62c558bb6468fe03678553ab01d (patch) | |
| tree | 2e6055446386d427d9a2d8b896972a8b103e7bd3 | |
| parent | 3a58f13a881ed351198ffab4cf9953cf19d2ab3a (diff) | |
| download | linux-2069624dac19d62c558bb6468fe03678553ab01d.tar.bz2 | |
net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT
As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.
This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.
Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/phy/sfp.c | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 4dfb79807823..9a5d5a10560f 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -250,6 +250,7 @@ struct sfp { struct sfp_eeprom_id id; unsigned int module_power_mW; unsigned int module_t_start_up; + bool tx_fault_ignore; #if IS_ENABLED(CONFIG_HWMON) struct sfp_diag diag; @@ -1956,6 +1957,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) else sfp->module_t_start_up = T_START_UP; + if (!memcmp(id.base.vendor_name, "HUAWEI ", 16) && + !memcmp(id.base.vendor_pn, "MA5671A ", 16)) + sfp->tx_fault_ignore = true; + else + sfp->tx_fault_ignore = false; + return 0; } @@ -2409,7 +2416,10 @@ static void sfp_check_state(struct sfp *sfp) mutex_lock(&sfp->st_mutex); state = sfp_get_state(sfp); changed = state ^ sfp->state; - changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + if (sfp->tx_fault_ignore) + changed &= SFP_F_PRESENT | SFP_F_LOS; + else + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; for (i = 0; i < GPIO_MAX; i++) if (changed & BIT(i)) |