Merge branch 'acpi-soc'

* acpi-soc:
  PM / clk: don't leave clocks enabled when driver not bound
  i2c: dw: Add APM X-Gene ACPI I2C device support
  ACPI / APD: Add APM X-Gene ACPI I2C device support
  ACPI / LPSS: change 'does not have' to 'has' in comment
  Revert "dmaengine: dw: platform: provide platform data for Intel"
  dmaengine: dw: return immediately from IRQ when DMA isn't in use
  dmaengine: dw: platform: power on device on shutdown
  ACPI / LPSS: override power state for LPSS DMA device
  ACPI / LPSS: power on when probe() and otherwise when remove()
  ACPI / LPSS: do delay for all LPSS devices when D3->D0
  ACPI / LPSS: allow to use specific PM domain during ->probe()
  Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()"
  device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification
  x86/platform/iosf_mbi: Remove duplicate definitions

Conflicts:
	drivers/i2c/busses/i2c-designware-platdrv.c

16 files changed, 333 insertions, 167 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index db3622f22b61..790aa3ee1afa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -523,9 +523,10 @@ config X86_INTEL_QUARK
 
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
-	depends on ACPI
+	depends on X86 && ACPI
 	select COMMON_CLK
 	select PINCTRL
+	select IOSF_MBI
 	---help---
 	  Select to build support for Intel Low Power Subsystem such as
 	  found on Intel Lynxpoint PCH. Selecting this option enables
diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h
index b72ad0faa6c5..b41ee164930a 100644
--- a/arch/x86/include/asm/iosf_mbi.h
+++ b/arch/x86/include/asm/iosf_mbi.h
@@ -1,5 +1,5 @@
 /*
- * iosf_mbi.h: Intel OnChip System Fabric MailBox access support
+ * Intel OnChip System Fabric MailBox access support
  */
 
 #ifndef IOSF_MBI_SYMS_H
@@ -16,6 +16,18 @@
 #define MBI_MASK_LO		0x000000FF
 #define MBI_ENABLE		0xF0
 
+/* IOSF SB read/write opcodes */
+#define MBI_MMIO_READ		0x00
+#define MBI_MMIO_WRITE		0x01
+#define MBI_CFG_READ		0x04
+#define MBI_CFG_WRITE		0x05
+#define MBI_CR_READ		0x06
+#define MBI_CR_WRITE		0x07
+#define MBI_REG_READ		0x10
+#define MBI_REG_WRITE		0x11
+#define MBI_ESRAM_READ		0x12
+#define MBI_ESRAM_WRITE		0x13
+
 /* Baytrail available units */
 #define BT_MBI_UNIT_AUNIT	0x00
 #define BT_MBI_UNIT_SMC		0x01
@@ -28,50 +40,13 @@
 #define BT_MBI_UNIT_SATA	0xA3
 #define BT_MBI_UNIT_PCIE	0xA6
 
-/* Baytrail read/write opcodes */
-#define BT_MBI_AUNIT_READ	0x10
-#define BT_MBI_AUNIT_WRITE	0x11
-#define BT_MBI_SMC_READ		0x10
-#define BT_MBI_SMC_WRITE	0x11
-#define BT_MBI_CPU_READ		0x10
-#define BT_MBI_CPU_WRITE	0x11
-#define BT_MBI_BUNIT_READ	0x10
-#define BT_MBI_BUNIT_WRITE	0x11
-#define BT_MBI_PMC_READ		0x06
-#define BT_MBI_PMC_WRITE	0x07
-#define BT_MBI_GFX_READ		0x00
-#define BT_MBI_GFX_WRITE	0x01
-#define BT_MBI_SMIO_READ	0x06
-#define BT_MBI_SMIO_WRITE	0x07
-#define BT_MBI_USB_READ		0x06
-#define BT_MBI_USB_WRITE	0x07
-#define BT_MBI_SATA_READ	0x00
-#define BT_MBI_SATA_WRITE	0x01
-#define BT_MBI_PCIE_READ	0x00
-#define BT_MBI_PCIE_WRITE	0x01
-
 /* Quark available units */
 #define QRK_MBI_UNIT_HBA	0x00
 #define QRK_MBI_UNIT_HB		0x03
 #define QRK_MBI_UNIT_RMU	0x04
 #define QRK_MBI_UNIT_MM		0x05
-#define QRK_MBI_UNIT_MMESRAM	0x05
 #define QRK_MBI_UNIT_SOC	0x31
 
-/* Quark read/write opcodes */
-#define QRK_MBI_HBA_READ	0x10
-#define QRK_MBI_HBA_WRITE	0x11
-#define QRK_MBI_HB_READ		0x10
-#define QRK_MBI_HB_WRITE	0x11
-#define QRK_MBI_RMU_READ	0x10
-#define QRK_MBI_RMU_WRITE	0x11
-#define QRK_MBI_MM_READ		0x10
-#define QRK_MBI_MM_WRITE	0x11
-#define QRK_MBI_MMESRAM_READ	0x12
-#define QRK_MBI_MMESRAM_WRITE	0x13
-#define QRK_MBI_SOC_READ	0x06
-#define QRK_MBI_SOC_WRITE	0x07
-
 #if IS_ENABLED(CONFIG_IOSF_MBI)
 
 bool iosf_mbi_available(void);
diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c
index 5ca8ead91579..81c769e80614 100644
--- a/arch/x86/platform/atom/punit_atom_debug.c
+++ b/arch/x86/platform/atom/punit_atom_debug.c
@@ -25,8 +25,6 @@
 #include <asm/cpu_device_id.h>
 #include <asm/iosf_mbi.h>
 
-/* Side band Interface port */
-#define PUNIT_PORT		0x04
 /* Power gate status reg */
 #define PWRGT_STATUS		0x61
 /* Subsystem config/status Video processor */
@@ -85,9 +83,8 @@ static int punit_dev_state_show(struct seq_file *seq_file, void *unused)
 
 	seq_puts(seq_file, "\n\nPUNIT NORTH COMPLEX DEVICES :\n");
 	while (punit_devp->name) {
-		status = iosf_mbi_read(PUNIT_PORT, BT_MBI_PMC_READ,
-				       punit_devp->reg,
-				       &punit_pwr_status);
+		status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+				       punit_devp->reg, &punit_pwr_status);
 		if (status) {
 			seq_printf(seq_file, "%9s : Read Failed\n",
 				   punit_devp->name);
diff --git a/arch/x86/platform/intel-quark/imr.c b/arch/x86/platform/intel-quark/imr.c
index 0ee619f9fcb7..c1bdafaac3ca 100644
--- a/arch/x86/platform/intel-quark/imr.c
+++ b/arch/x86/platform/intel-quark/imr.c
@@ -111,23 +111,19 @@ static int imr_read(struct imr_device *idev, u32 imr_id, struct imr_regs *imr)
 	u32 reg = imr_id * IMR_NUM_REGS + idev->reg_base;
 	int ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_lo);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_lo);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_hi);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_hi);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->rmask);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->rmask);
 	if (ret)
 		return ret;
 
-	return iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->wmask);
+	return iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->wmask);
 }
 
 /**
@@ -151,31 +147,27 @@ static int imr_write(struct imr_device *idev, u32 imr_id,
 
 	local_irq_save(flags);
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE, reg++,
-				imr->addr_lo);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_lo);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->addr_hi);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_hi);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->rmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->rmask);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->wmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->wmask);
 	if (ret)
 		goto failed;
 
 	/* Lock bit must be set separately to addr_lo address bits. */
 	if (lock) {
 		imr->addr_lo |= IMR_LOCK;
-		ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-					reg - IMR_NUM_REGS, imr->addr_lo);
+		ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE,
+				     reg - IMR_NUM_REGS, imr->addr_lo);
 		if (ret)
 			goto failed;
 	}
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index a450e7af877c..d507cf6deda0 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -51,7 +51,7 @@ struct apd_private_data {
 	const struct apd_device_desc *dev_desc;
 };
 
-#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
 #define APD_ADDR(desc)	((unsigned long)&desc)
 
 static int acpi_apd_setup(struct apd_private_data *pdata)
@@ -71,6 +71,7 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
 	return 0;
 }
 
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 static struct apd_device_desc cz_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 133000000,
@@ -80,6 +81,14 @@ static struct apd_device_desc cz_uart_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 48000000,
 };
+#endif
+
+#ifdef CONFIG_ARM64
+static struct apd_device_desc xgene_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 100000000,
+};
+#endif
 
 #else
 
@@ -132,9 +141,14 @@ static int acpi_apd_create_device(struct acpi_device *adev,
 
 static const struct acpi_device_id acpi_apd_device_ids[] = {
 	/* Generic apd devices */
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 	{ "AMD0010", APD_ADDR(cz_i2c_desc) },
 	{ "AMD0020", APD_ADDR(cz_uart_desc) },
 	{ "AMD0030", },
+#endif
+#ifdef CONFIG_ARM64
+	{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
+#endif
 	{ }
 };
 
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index f9e0d09f7c66..047281a6ae11 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -15,6 +15,7 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/clk-lpss.h>
 #include <linux/pm_runtime.h>
@@ -26,6 +27,10 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 #ifdef CONFIG_X86_INTEL_LPSS
 
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+#include <asm/pmc_atom.h>
+
 #define LPSS_ADDR(desc) ((unsigned long)&desc)
 
 #define LPSS_CLK_SIZE	0x04
@@ -71,7 +76,7 @@ struct lpss_device_desc {
 	void (*setup)(struct lpss_private_data *pdata);
 };
 
-static struct lpss_device_desc lpss_dma_desc = {
+static const struct lpss_device_desc lpss_dma_desc = {
 	.flags = LPSS_CLK,
 };
 
@@ -84,6 +89,23 @@ struct lpss_private_data {
 	u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
 };
 
+/* LPSS run time quirks */
+static unsigned int lpss_quirks;
+
+/*
+ * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
+ *
+ * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
+ * it can be powered off automatically whenever the last LPSS device goes down.
+ * In case of no power any access to the DMA controller will hang the system.
+ * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
+ * well as on ASuS T100TA transformer.
+ *
+ * This quirk overrides power state of entire LPSS island to keep DMA powered
+ * on whenever we have at least one other device in use.
+ */
+#define LPSS_QUIRK_ALWAYS_POWER_ON	BIT(0)
+
 /* UART Component Parameter Register */
 #define LPSS_UART_CPR			0xF4
 #define LPSS_UART_CPR_AFCE		BIT(4)
@@ -196,13 +218,21 @@ static const struct lpss_device_desc bsw_i2c_dev_desc = {
 	.setup = byt_i2c_setup,
 };
 
-static struct lpss_device_desc bsw_spi_dev_desc = {
+static const struct lpss_device_desc bsw_spi_dev_desc = {
 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 			| LPSS_NO_D3_DELAY,
 	.prv_offset = 0x400,
 	.setup = lpss_deassert_reset,
 };
 
+#define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
+
+static const struct x86_cpu_id lpss_cpu_ids[] = {
+	ICPU(0x37),	/* Valleyview, Bay Trail */
+	ICPU(0x4c),	/* Braswell, Cherry Trail */
+	{}
+};
+
 #else
 
 #define LPSS_ADDR(desc) (0UL)
@@ -574,6 +604,17 @@ static void acpi_lpss_restore_ctx(struct device *dev,
 {
 	unsigned int i;
 
+	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
+		unsigned long offset = i * sizeof(u32);
+
+		__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
+		dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
+			pdata->prv_reg_ctx[i], offset);
+	}
+}
+
+static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
+{
 	/*
 	 * The following delay is needed or the subsequent write operations may
 	 * fail. The LPSS devices are actually PCI devices and the PCI spec
@@ -586,14 +627,34 @@ static void acpi_lpss_restore_ctx(struct device *dev,
 		delay = 0;
 
 	msleep(delay);
+}
 
-	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
-		unsigned long offset = i * sizeof(u32);
+static int acpi_lpss_activate(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+	int ret;
 
-		__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
-		dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
-			pdata->prv_reg_ctx[i], offset);
-	}
+	ret = acpi_dev_runtime_resume(dev);
+	if (ret)
+		return ret;
+
+	acpi_lpss_d3_to_d0_delay(pdata);
+
+	/*
+	 * This is called only on ->probe() stage where a device is either in
+	 * known state defined by BIOS or most likely powered off. Due to this
+	 * we have to deassert reset line to be sure that ->probe() will
+	 * recognize the device.
+	 */
+	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+		lpss_deassert_reset(pdata);
+
+	return 0;
+}
+
+static void acpi_lpss_dismiss(struct device *dev)
+{
+	acpi_dev_runtime_suspend(dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -621,6 +682,8 @@ static int acpi_lpss_resume_early(struct device *dev)
 	if (ret)
 		return ret;
 
+	acpi_lpss_d3_to_d0_delay(pdata);
+
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_restore_ctx(dev, pdata);
 
@@ -628,6 +691,89 @@ static int acpi_lpss_resume_early(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
+/* IOSF SB for LPSS island */
+#define LPSS_IOSF_UNIT_LPIOEP		0xA0
+#define LPSS_IOSF_UNIT_LPIO1		0xAB
+#define LPSS_IOSF_UNIT_LPIO2		0xAC
+
+#define LPSS_IOSF_PMCSR			0x84
+#define LPSS_PMCSR_D0			0
+#define LPSS_PMCSR_D3hot		3
+#define LPSS_PMCSR_Dx_MASK		GENMASK(1, 0)
+
+#define LPSS_IOSF_GPIODEF0		0x154
+#define LPSS_GPIODEF0_DMA1_D3		BIT(2)
+#define LPSS_GPIODEF0_DMA2_D3		BIT(3)
+#define LPSS_GPIODEF0_DMA_D3_MASK	GENMASK(3, 2)
+
+static DEFINE_MUTEX(lpss_iosf_mutex);
+
+static void lpss_iosf_enter_d3_state(void)
+{
+	u32 value1 = 0;
+	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+	u32 value2 = LPSS_PMCSR_D3hot;
+	u32 mask2 = LPSS_PMCSR_Dx_MASK;
+	/*
+	 * PMC provides an information about actual status of the LPSS devices.
+	 * Here we read the values related to LPSS power island, i.e. LPSS
+	 * devices, excluding both LPSS DMA controllers, along with SCC domain.
+	 */
+	u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
+	int ret;
+
+	ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
+	if (ret)
+		return;
+
+	mutex_lock(&lpss_iosf_mutex);
+
+	ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Get the status of entire LPSS power island per device basis.
+	 * Shutdown both LPSS DMA controllers if and only if all other devices
+	 * are already in D3hot.
+	 */
+	pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
+	if (pmc_status)
+		goto exit;
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+			LPSS_IOSF_GPIODEF0, value1, mask1);
+exit:
+	mutex_unlock(&lpss_iosf_mutex);
+}
+
+static void lpss_iosf_exit_d3_state(void)
+{
+	u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3;
+	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+	u32 value2 = LPSS_PMCSR_D0;
+	u32 mask2 = LPSS_PMCSR_Dx_MASK;
+
+	mutex_lock(&lpss_iosf_mutex);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+			LPSS_IOSF_GPIODEF0, value1, mask1);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	mutex_unlock(&lpss_iosf_mutex);
+}
+
 static int acpi_lpss_runtime_suspend(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
@@ -640,7 +786,17 @@ static int acpi_lpss_runtime_suspend(struct device *dev)
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_save_ctx(dev, pdata);
 
-	return acpi_dev_runtime_suspend(dev);
+	ret = acpi_dev_runtime_suspend(dev);
+
+	/*
+	 * This call must be last in the sequence, otherwise PMC will return
+	 * wrong status for devices being about to be powered off. See
+	 * lpss_iosf_enter_d3_state() for further information.
+	 */
+	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+		lpss_iosf_enter_d3_state();
+
+	return ret;
 }
 
 static int acpi_lpss_runtime_resume(struct device *dev)
@@ -648,10 +804,19 @@ static int acpi_lpss_runtime_resume(struct device *dev)
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 	int ret;
 
+	/*
+	 * This call is kept first to be in symmetry with
+	 * acpi_lpss_runtime_suspend() one.
+	 */
+	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+		lpss_iosf_exit_d3_state();
+
 	ret = acpi_dev_runtime_resume(dev);
 	if (ret)
 		return ret;
 
+	acpi_lpss_d3_to_d0_delay(pdata);
+
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_restore_ctx(dev, pdata);
 
@@ -660,6 +825,10 @@ static int acpi_lpss_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM */
 
 static struct dev_pm_domain acpi_lpss_pm_domain = {
+#ifdef CONFIG_PM
+	.activate = acpi_lpss_activate,
+	.dismiss = acpi_lpss_dismiss,
+#endif
 	.ops = {
 #ifdef CONFIG_PM
 #ifdef CONFIG_PM_SLEEP
@@ -705,8 +874,14 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
 	}
 
 	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
+	case BUS_NOTIFY_BIND_DRIVER:
 		pdev->dev.pm_domain = &acpi_lpss_pm_domain;
+		break;
+	case BUS_NOTIFY_DRIVER_NOT_BOUND:
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		pdev->dev.pm_domain = NULL;
+		break;
+	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdata->dev_desc->flags & LPSS_LTR)
 			return sysfs_create_group(&pdev->dev.kobj,
 						  &lpss_attr_group);
@@ -714,7 +889,6 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdata->dev_desc->flags & LPSS_LTR)
 			sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
-		pdev->dev.pm_domain = NULL;
 		break;
 	default:
 		break;
@@ -754,10 +928,19 @@ static struct acpi_scan_handler lpss_handler = {
 
 void __init acpi_lpss_init(void)
 {
-	if (!lpt_clk_init()) {
-		bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
-		acpi_scan_add_handler(&lpss_handler);
-	}
+	const struct x86_cpu_id *id;
+	int ret;
+
+	ret = lpt_clk_init();
+	if (ret)
+		return;
+
+	id = x86_match_cpu(lpss_cpu_ids);
+	if (id)
+		lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
+
+	bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
+	acpi_scan_add_handler(&lpss_handler);
 }
 
 #else
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a641cf3ccad6..03697043344a 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -268,6 +268,9 @@ int device_bind_driver(struct device *dev)
 	ret = driver_sysfs_add(dev);
 	if (!ret)
 		driver_bound(dev);
+	else if (dev->bus)
+		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+					     BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(device_bind_driver);
@@ -290,7 +293,7 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	/* If using pinctrl, bind pins now before probing */
 	ret = pinctrl_bind_pins(dev);
 	if (ret)
-		goto probe_failed;
+		goto pinctrl_bind_failed;
 
 	if (driver_sysfs_add(dev)) {
 		printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
@@ -334,6 +337,10 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	goto done;
 
 probe_failed:
+	if (dev->bus)
+		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+					     BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
+pinctrl_bind_failed:
 	devres_release_all(dev);
 	driver_sysfs_remove(dev);
 	dev->driver = NULL;
@@ -701,7 +708,6 @@ static void __device_release_driver(struct device *dev)
 			blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
 						     BUS_NOTIFY_UNBOUND_DRIVER,
 						     dev);
-
 	}
 }
 
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 60ee5591ee8f..c39b8617280f 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -473,6 +473,7 @@ static int pm_clk_notify(struct notifier_block *nb,
 			enable_clock(dev, NULL);
 		}
 		break;
+	case BUS_NOTIFY_DRIVER_NOT_BOUND:
 	case BUS_NOTIFY_UNBOUND_DRIVER:
 		if (clknb->con_ids[0]) {
 			for (con_id = clknb->con_ids; *con_id; con_id++)
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 7067b6ddc1db..8b20930ade98 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -622,12 +622,17 @@ static void dw_dma_tasklet(unsigned long data)
 static irqreturn_t dw_dma_interrupt(int irq, void *dev_id)
 {
 	struct dw_dma *dw = dev_id;
-	u32 status = dma_readl(dw, STATUS_INT);
+	u32 status;
 
+	/* Check if we have any interrupt from the DMAC which is not in use */
+	if (!dw->in_use)
+		return IRQ_NONE;
+
+	status = dma_readl(dw, STATUS_INT);
 	dev_vdbg(dw->dma.dev, "%s: status=0x%x\n", __func__, status);
 
 	/* Check if we have any interrupt from the DMAC */
-	if (!status || !dw->in_use)
+	if (!status)
 		return IRQ_NONE;
 
 	/*
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index 68a4815750b5..127093a0c0e8 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -155,7 +155,6 @@ static int dw_probe(struct platform_device *pdev)
 	struct dw_dma_chip *chip;
 	struct device *dev = &pdev->dev;
 	struct resource *mem;
-	const struct acpi_device_id *id;
 	struct dw_dma_platform_data *pdata;
 	int err;
 
@@ -179,11 +178,6 @@ static int dw_probe(struct platform_device *pdev)
 	pdata = dev_get_platdata(dev);
 	if (!pdata)
 		pdata = dw_dma_parse_dt(pdev);
-	if (!pdata && has_acpi_companion(dev)) {
-		id = acpi_match_device(dev->driver->acpi_match_table, dev);
-		if (id)
-			pdata = (struct dw_dma_platform_data *)id->driver_data;
-	}
 
 	chip->dev = dev;
 
@@ -239,7 +233,19 @@ static void dw_shutdown(struct platform_device *pdev)
 {
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
+	/*
+	 * We have to call dw_dma_disable() to stop any ongoing transfer. On
+	 * some platforms we can't do that since DMA device is powered off.
+	 * Moreover we have no possibility to check if the platform is affected
+	 * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
+	 * unconditionally. On the other hand we can't use
+	 * pm_runtime_suspended() because runtime PM framework is not fully
+	 * used by the driver.
+	 */
+	pm_runtime_get_sync(chip->dev);
 	dw_dma_disable(chip);
+	pm_runtime_put_sync_suspend(chip->dev);
+
 	clk_disable_unprepare(chip->clk);
 }
 
@@ -252,17 +258,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
 #endif
 
 #ifdef CONFIG_ACPI
-static struct dw_dma_platform_data dw_dma_acpi_pdata = {
-	.nr_channels = 8,
-	.is_private = true,
-	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
-	.chan_priority = CHAN_PRIORITY_ASCENDING,
-	.block_size = 4095,
-	.nr_masters = 2,
-};
-
 static const struct acpi_device_id dw_dma_acpi_id_table[] = {
-	{ "INTL9C60", (kernel_ulong_t)&dw_dma_acpi_pdata },
+	{ "INTL9C60", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table);
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 7d7ae97476e2..e38c2bbba940 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -34,8 +34,7 @@ static int get_sem(struct device *dev, u32 *sem)
 	u32 data;
 	int ret;
 
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE,
-				&data);
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
 	if (ret) {
 		dev_err(dev, "iosf failed to read punit semaphore\n");
 		return ret;
@@ -50,21 +49,19 @@ static void reset_semaphore(struct device *dev)
 {
 	u32 data;
 
-	if (iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
-				PUNIT_SEMAPHORE, &data)) {
+	if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
 		dev_err(dev, "iosf failed to reset punit semaphore during read\n");
 		return;
 	}
 
 	data &= ~PUNIT_SEMAPHORE_BIT;
-	if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
-				PUNIT_SEMAPHORE, data))
+	if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
 		dev_err(dev, "iosf failed to reset punit semaphore during write\n");
 }
 
 static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 {
-	u32 sem;
+	u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
 	int ret;
 	unsigned long start, end;
 
@@ -77,8 +74,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 		return 0;
 
 	/* host driver writes to side band semaphore register */
-	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
-				PUNIT_SEMAPHORE, PUNIT_SEMAPHORE_ACQUIRE);
+	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, sem);
 	if (ret) {
 		dev_err(dev->dev, "iosf punit semaphore request failed\n");
 		return ret;
@@ -102,8 +98,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
 	reset_semaphore(dev->dev);
 
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
-				PUNIT_SEMAPHORE, &sem);
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
 	if (ret)
 		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
 	else
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index cbd663deef38..bf72ae740fc1 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "80860F41", 0 },
 	{ "808622C1", 0 },
 	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "APMC0D0F", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
index 48747c28a43d..4099159ffa3d 100644
--- a/drivers/powercap/intel_rapl.c
+++ b/drivers/powercap/intel_rapl.c
@@ -988,16 +988,16 @@ static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
 	}
 
 	if (!power_ctrl_orig_val)
-		iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_PMC_READ,
-			rapl_defaults->floor_freq_reg_addr,
-				&power_ctrl_orig_val);
+		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_CR_READ,
+			      rapl_defaults->floor_freq_reg_addr,
+			      &power_ctrl_orig_val);
 	mdata = power_ctrl_orig_val;
 	if (enable) {
 		mdata &= ~(0x7f << 8);
 		mdata |= 1 << 8;
 	}
-	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_PMC_WRITE,
-		rapl_defaults->floor_freq_reg_addr, mdata);
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_CR_WRITE,
+		       rapl_defaults->floor_freq_reg_addr, mdata);
 }
 
 static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
diff --git a/drivers/thermal/intel_quark_dts_thermal.c b/drivers/thermal/intel_quark_dts_thermal.c
index 5ed90e6c8a64..5d33b350da1c 100644
--- a/drivers/thermal/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel_quark_dts_thermal.c
@@ -125,8 +125,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 	struct soc_sensor_entry *aux_entry = tzd->devdata;
 	int ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_ENABLE, &out);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_ENABLE, &out);
 	if (ret)
 		return ret;
 
@@ -137,8 +137,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 
 	if (!aux_entry->locked) {
 		out |= QRK_DTS_ENABLE_BIT;
-		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
-					QRK_DTS_REG_OFFSET_ENABLE, out);
+		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				     QRK_DTS_REG_OFFSET_ENABLE, out);
 		if (ret)
 			return ret;
 
@@ -158,8 +158,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 	struct soc_sensor_entry *aux_entry = tzd->devdata;
 	int ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_ENABLE, &out);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_ENABLE, &out);
 	if (ret)
 		return ret;
 
@@ -170,8 +170,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 
 	if (!aux_entry->locked) {
 		out &= ~QRK_DTS_ENABLE_BIT;
-		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
-					QRK_DTS_REG_OFFSET_ENABLE, out);
+		ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				     QRK_DTS_REG_OFFSET_ENABLE, out);
 
 		if (ret)
 			return ret;
@@ -192,8 +192,8 @@ static int _get_trip_temp(int trip, int *temp)
 	u32 out;
 
 	mutex_lock(&dts_update_mutex);
-	status = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-				QRK_DTS_REG_OFFSET_PTPS, &out);
+	status = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			       QRK_DTS_REG_OFFSET_PTPS, &out);
 	mutex_unlock(&dts_update_mutex);
 
 	if (status)
@@ -236,8 +236,8 @@ static int update_trip_temp(struct soc_sensor_entry *aux_entry,
 		goto failed;
 	}
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-				QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
 	if (ret)
 		goto failed;
 
@@ -262,8 +262,8 @@ static int update_trip_temp(struct soc_sensor_entry *aux_entry,
 	out |= (temp_out & QRK_DTS_MASK_TP_THRES) <<
 		(trip * QRK_DTS_SHIFT_TP);
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
-				QRK_DTS_REG_OFFSET_PTPS, out);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+			     QRK_DTS_REG_OFFSET_PTPS, out);
 
 failed:
 	mutex_unlock(&dts_update_mutex);
@@ -294,8 +294,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	int ret;
 
 	mutex_lock(&dts_update_mutex);
-	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_TEMP, &out);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_TEMP, &out);
 	mutex_unlock(&dts_update_mutex);
 
 	if (ret)
@@ -350,13 +350,13 @@ static void free_soc_dts(struct soc_sensor_entry *aux_entry)
 	if (aux_entry) {
 		if (!aux_entry->locked) {
 			mutex_lock(&dts_update_mutex);
-			iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
-					QRK_DTS_REG_OFFSET_ENABLE,
-					aux_entry->store_dts_enable);
+			iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				       QRK_DTS_REG_OFFSET_ENABLE,
+				       aux_entry->store_dts_enable);
 
-			iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
-					QRK_DTS_REG_OFFSET_PTPS,
-					aux_entry->store_ptps);
+			iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+				       QRK_DTS_REG_OFFSET_PTPS,
+				       aux_entry->store_ptps);
 			mutex_unlock(&dts_update_mutex);
 		}
 		thermal_zone_device_unregister(aux_entry->tzone);
@@ -378,9 +378,8 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
 	}
 
 	/* Check if DTS register is locked */
-	err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_LOCK,
-					&out);
+	err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+			    QRK_DTS_REG_OFFSET_LOCK, &out);
 	if (err)
 		goto err_ret;
 
@@ -395,16 +394,16 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
 	/* Store DTS default state if DTS registers are not locked */
 	if (!aux_entry->locked) {
 		/* Store DTS default enable for restore on exit */
-		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_ENABLE,
-					&aux_entry->store_dts_enable);
+		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+				    QRK_DTS_REG_OFFSET_ENABLE,
+				    &aux_entry->store_dts_enable);
 		if (err)
 			goto err_ret;
 
 		/* Store DTS default PTPS register for restore on exit */
-		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
-					QRK_DTS_REG_OFFSET_PTPS,
-					&aux_entry->store_ptps);
+		err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+				    QRK_DTS_REG_OFFSET_PTPS,
+				    &aux_entry->store_ptps);
 		if (err)
 			goto err_ret;
 	}
diff --git a/drivers/thermal/intel_soc_dts_iosf.c b/drivers/thermal/intel_soc_dts_iosf.c
index 5841d1d72996..f72e1db3216f 100644
--- a/drivers/thermal/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel_soc_dts_iosf.c
@@ -90,7 +90,7 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd, int trip,
 	dts = tzd->devdata;
 	sensors = dts->sensors;
 	mutex_lock(&sensors->dts_update_lock);
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_PTPS, &out);
 	mutex_unlock(&sensors->dts_update_lock);
 	if (status)
@@ -124,27 +124,27 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 
 	temp_out = (sensors->tj_max - temp) / 1000;
 
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_PTPS, &store_ptps);
 	if (status)
 		return status;
 
 	out = (store_ptps & ~(0xFF << (thres_index * 8)));
 	out |= (temp_out & 0xFF) << (thres_index * 8);
-	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTPS, out);
 	if (status)
 		return status;
 
 	pr_debug("update_trip_temp PTPS = %x\n", out);
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_PTMC, &out);
 	if (status)
 		goto err_restore_ptps;
 
 	store_ptmc = out;
 
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_TE_AUX0 + thres_index,
 			       &te_out);
 	if (status)
@@ -167,12 +167,12 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 			out &= ~SOC_DTS_AUX0_ENABLE_BIT;
 		te_out &= ~int_enable_bit;
 	}
-	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTMC, out);
 	if (status)
 		goto err_restore_te_out;
 
-	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_TE_AUX0 + thres_index,
 				te_out);
 	if (status)
@@ -182,13 +182,13 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
 
 	return 0;
 err_restore_te_out:
-	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 		       SOC_DTS_OFFSET_PTMC, store_te_out);
 err_restore_ptmc:
-	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 		       SOC_DTS_OFFSET_PTMC, store_ptmc);
 err_restore_ptps:
-	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 		       SOC_DTS_OFFSET_PTPS, store_ptps);
 	/* Nothing we can do if restore fails */
 
@@ -235,7 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 
 	dts = tzd->devdata;
 	sensors = dts->sensors;
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_TEMP, &out);
 	if (status)
 		return status;
@@ -259,14 +259,14 @@ static int soc_dts_enable(int id)
 	u32 out;
 	int ret;
 
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			    SOC_DTS_OFFSET_ENABLE, &out);
 	if (ret)
 		return ret;
 
 	if (!(out & BIT(id))) {
 		out |= BIT(id);
-		ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+		ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				     SOC_DTS_OFFSET_ENABLE, out);
 		if (ret)
 			return ret;
@@ -278,7 +278,7 @@ static int soc_dts_enable(int id)
 static void remove_dts_thermal_zone(struct intel_soc_dts_sensor_entry *dts)
 {
 	if (dts) {
-		iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+		iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 			       SOC_DTS_OFFSET_ENABLE, dts->store_status);
 		thermal_zone_device_unregister(dts->tzone);
 	}
@@ -296,9 +296,8 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 	int i;
 
 	/* Store status to restor on exit */
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
-			    SOC_DTS_OFFSET_ENABLE,
-			    &dts->store_status);
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+			    SOC_DTS_OFFSET_ENABLE, &dts->store_status);
 	if (ret)
 		goto err_ret;
 
@@ -311,7 +310,7 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 	}
 
 	/* Check if the writable trip we provide is not used by BIOS */
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			    SOC_DTS_OFFSET_PTPS, &store_ptps);
 	if (ret)
 		trip_mask = 0;
@@ -374,19 +373,19 @@ void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors)
 
 	spin_lock_irqsave(&sensors->intr_notify_lock, flags);
 
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_PTMC, &ptmc_out);
 	ptmc_out |= SOC_DTS_PTMC_APIC_DEASSERT_BIT;
-	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 				SOC_DTS_OFFSET_PTMC, ptmc_out);
 
-	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
 			       SOC_DTS_OFFSET_PTTSS, &sticky_out);
 	pr_debug("status %d PTTSS %x\n", status, sticky_out);
 	if (sticky_out & SOC_DTS_TRIP_MASK) {
 		int i;
 		/* reset sticky bit */
-		status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+		status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
 					SOC_DTS_OFFSET_PTTSS, sticky_out);
 		spin_unlock_irqrestore(&sensors->intr_notify_lock, flags);
 
diff --git a/include/linux/device.h b/include/linux/device.h
index b8f411b57dcb..f627ba20a46c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -191,6 +191,7 @@ extern int bus_unregister_notifier(struct bus_type *bus,
 						      unbound */
 #define BUS_NOTIFY_UNBOUND_DRIVER	0x00000007 /* driver is unbound
 						      from the device */
+#define BUS_NOTIFY_DRIVER_NOT_BOUND	0x00000008 /* driver fails to be bound */
 
 extern struct kset *bus_get_kset(struct bus_type *bus);
 extern struct klist *bus_get_device_klist(struct bus_type *bus);