Merge branch 'dt-bindings-net-dsa-microchip-convert-ksz-bindings-to-yaml'

Christian Eggers says:

====================
dt-bindings: net: dsa: microchip: convert KSZ bindings to yaml

These patches are orginally from the series

"net: dsa: microchip: PTP support for KSZ956x"

As the the device tree conversion to yaml is not really related to the
PTP patches and the original series is going to take more time than
I expected, I would like to split this.

Changes (original series -> v1)
--------------------------------
- dts: moved "allOf" below "maintainers"
- dts: use "unevaluatedProperties" instead of "additionalProperties"
- dts: removed "spi-cpha" and "spi-cpol" flags as the hardware is fixed
- ksz8795: setup SPI for mode 3
- ksz9477: dito
====================

Link: https://lore.kernel.org/r/20201120112107.16334-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

6 files changed, 164 insertions, 127 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
deleted file mode 100644
index 95e91e84151c..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-Microchip KSZ Series Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of the following:
-  - "microchip,ksz8765"
-  - "microchip,ksz8794"
-  - "microchip,ksz8795"
-  - "microchip,ksz9477"
-  - "microchip,ksz9897"
-  - "microchip,ksz9896"
-  - "microchip,ksz9567"
-  - "microchip,ksz8565"
-  - "microchip,ksz9893"
-  - "microchip,ksz9563"
-  - "microchip,ksz8563"
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
-			  125MHz instead of 25MHz.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via SPI to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	spi1: spi@f8008000 {
-		pinctrl-0 = <&pinctrl_spi_ksz>;
-		cs-gpios = <&pioC 25 0>;
-		id = <1>;
-
-		ksz9477: ksz9477@0 {
-			compatible = "microchip,ksz9477";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@4 {
-					reg = <4>;
-					label = "lan5";
-				};
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-		ksz8565: ksz8565@0 {
-			compatible = "microchip,ksz8565";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
new file mode 100644
index 000000000000..9f7d131bbcef
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Woojung Huh <Woojung.Huh@microchip.com>
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+  # required and optional properties.
+  compatible:
+    enum:
+      - microchip,ksz8765
+      - microchip,ksz8794
+      - microchip,ksz8795
+      - microchip,ksz9477
+      - microchip,ksz9897
+      - microchip,ksz9896
+      - microchip,ksz9567
+      - microchip,ksz8565
+      - microchip,ksz9893
+      - microchip,ksz9563
+      - microchip,ksz8563
+
+  reset-gpios:
+    description:
+      Should be a gpio specifier for a reset line.
+    maxItems: 1
+
+  microchip,synclko-125:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+    eth0 {
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-0 = <&pinctrl_spi_ksz>;
+        cs-gpios = <&pioC 25 0>;
+        id = <1>;
+
+        ksz9477: switch@0 {
+            compatible = "microchip,ksz9477";
+            reg = <0>;
+            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@4 {
+                    reg = <4>;
+                    label = "lan5";
+                };
+                port@5 {
+                    reg = <5>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+
+        ksz8565: switch@1 {
+            compatible = "microchip,ksz8565";
+            reg = <1>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@6 {
+                    reg = <6>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d36bee3f1f04..8545e72c495c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11487,7 +11487,7 @@ M:	Woojung Huh <woojung.huh@microchip.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/dsa/ksz.txt
+F:	Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
 F:	drivers/net/dsa/microchip/*
 F:	include/linux/platform_data/microchip-ksz.h
 F:	net/dsa/tag_ksz.c
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index 8b00f8e6c02f..f98432a3e2b5 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -49,6 +49,12 @@ static int ksz8795_spi_probe(struct spi_device *spi)
 	if (spi->dev.platform_data)
 		dev->pdata = spi->dev.platform_data;
 
+	/* setup spi */
+	spi->mode = SPI_MODE_3;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
 	ret = ksz8795_switch_register(dev);
 
 	/* Main DSA driver may not be started yet. */
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index 1142768969c2..15bc11b3cda4 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -48,6 +48,12 @@ static int ksz9477_spi_probe(struct spi_device *spi)
 	if (spi->dev.platform_data)
 		dev->pdata = spi->dev.platform_data;
 
+	/* setup spi */
+	spi->mode = SPI_MODE_3;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
 	ret = ksz9477_switch_register(dev);
 
 	/* Main DSA driver may not be started yet. */
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 0ef854911f21..7002436e62b4 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -426,7 +426,9 @@ int ksz_switch_register(struct ksz_device *dev,
 		ret = of_get_phy_mode(dev->dev->of_node, &interface);
 		if (ret == 0)
 			dev->compat_interface = interface;
-		ports = of_get_child_by_name(dev->dev->of_node, "ports");
+		ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
+		if (!ports)
+			ports = of_get_child_by_name(dev->dev->of_node, "ports");
 		if (ports)
 			for_each_available_child_of_node(ports, port) {
 				if (of_property_read_u32(port, "reg",