Merge tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "This time we're removing more than adding:

  Removed drivers:

    leds-versatile:
      - all users of the Versatile LED driver are deleted and replaced
        with the very generic leds-syscon

    leds-sead3:
      - SEAD3 is using the generic leds-syscon & regmap based
        register-bit-led driver

  LED class drivers improvements:

    ledtrig-gpio:
      - use threaded IRQ, which both simplifies the code because we can
        drop the workqueue indirection, and it enables using the trigger
        for GPIOs that work with threaded IRQs themselves
      - refresh LED state after GPIO change since the new GPIO may have
        a different state than the old one

    leds-lp55xx:
      - make various arrays static const

    leds-pca963x:
      - add bindings to invert polarity"

* tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: make various arrays static const
  leds: Remove SEAD-3 driver
  leds: trigger: gpio: Use threaded IRQ
  leds: trigger: gpio: Refresh LED state after GPIO change
  leds: Delete obsolete Versatile driver
  leds: pca963x: Add bindings to invert polarity

9 files changed, 34 insertions, 237 deletions

diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
index dfbdb123a9bf..4eee41482041 100644
--- a/Documentation/devicetree/bindings/leds/pca963x.txt
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -10,6 +10,7 @@ Optional properties:
 - nxp,period-scale : In some configurations, the chip blinks faster than expected.
 		     This parameter provides a scaling ratio (fixed point, decimal divided
 		     by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
+- nxp,inverted-out: invert the polarity of the generated PWM
 
 Each led is represented as a sub-node of the nxp,pca963x device.
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c2999872090..594b24d410c3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -590,16 +590,6 @@ config LEDS_KTD2692
 
 	  Say Y to enable this driver.
 
-config LEDS_SEAD3
-	tristate "LED support for the MIPS SEAD 3 board"
-	depends on LEDS_CLASS && MIPS_SEAD3
-	help
-	  Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
-	  boards.
-
-	  This driver can also be built as a module. If so the module
-	  will be called leds-sead3.
-
 config LEDS_IS31FL319X
 	tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
 	depends on LEDS_CLASS && I2C && OF
@@ -651,14 +641,6 @@ config LEDS_SYSCON
 	  devices. This will only work with device tree enabled
 	  devices.
 
-config LEDS_VERSATILE
-	tristate "LED support for the ARM Versatile and RealView"
-	depends on ARCH_REALVIEW || ARCH_VERSATILE
-	depends on LEDS_CLASS
-	help
-	  This option enabled support for the LEDs on the ARM Versatile
-	  and RealView boards. Say Y to enabled these.
-
 config LEDS_PM8058
 	tristate "LED Support for the Qualcomm PM8058 PMIC"
 	depends on MFD_PM8XXX
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 45f133962ed8..909dae62ba05 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -62,11 +62,9 @@ obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
-obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
-obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
 obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
 obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
 obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index e9ba8cd32d66..924e50aefb00 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -168,13 +168,13 @@ static int lp5523_post_init_device(struct lp55xx_chip *chip)
 static void lp5523_load_engine(struct lp55xx_chip *chip)
 {
 	enum lp55xx_engine_index idx = chip->engine_idx;
-	u8 mask[] = {
+	static const u8 mask[] = {
 		[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
 		[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
 		[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
 	};
 
-	u8 val[] = {
+	static const u8 val[] = {
 		[LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
 		[LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
 		[LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
@@ -188,7 +188,7 @@ static void lp5523_load_engine(struct lp55xx_chip *chip)
 static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
 {
 	enum lp55xx_engine_index idx = chip->engine_idx;
-	u8 page_sel[] = {
+	static const u8 page_sel[] = {
 		[LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
 		[LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
 		[LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
@@ -208,7 +208,7 @@ static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
 static void lp5523_stop_engine(struct lp55xx_chip *chip)
 {
 	enum lp55xx_engine_index idx = chip->engine_idx;
-	u8 mask[] = {
+	static const u8 mask[] = {
 		[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
 		[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
 		[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
@@ -505,7 +505,7 @@ static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
 {
 	struct lp55xx_engine *engine = &chip->engines[nr - 1];
 	int ret;
-	u8 mux_page[] = {
+	static const u8 mux_page[] = {
 		[LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
 		[LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
 		[LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index ded1e4dac36a..3bf9a1271819 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -342,6 +342,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 	if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
 		chip->scaling = 1000;
 
+	/* default to non-inverted output, unless inverted is specified */
+	if (of_property_read_bool(np, "nxp,inverted-out"))
+		pdata->dir = PCA963X_INVERTED;
+	else
+		pdata->dir = PCA963X_NORMAL;
+
 	return pdata;
 }
 
@@ -452,11 +458,18 @@ static int pca963x_probe(struct i2c_client *client,
 	i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
 
 	if (pdata) {
+		u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
+						    PCA963X_MODE2);
 		/* Configure output: open-drain or totem pole (push-pull) */
 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
-			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
+			mode2 |= 0x01;
 		else
-			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
+			mode2 |= 0x05;
+		/* Configure direction: normal or inverted */
+		if (pdata->dir == PCA963X_INVERTED)
+			mode2 |= 0x10;
+		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
+					  mode2);
 	}
 
 	return 0;
diff --git a/drivers/leds/leds-sead3.c b/drivers/leds/leds-sead3.c
deleted file mode 100644
index eb97a3271bb3..000000000000
--- a/drivers/leds/leds-sead3.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2015 Imagination Technologies, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mips-boards/sead3-addr.h>
-
-static void sead3_pled_set(struct led_classdev *led_cdev,
-		enum led_brightness value)
-{
-	writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
-}
-
-static void sead3_fled_set(struct led_classdev *led_cdev,
-		enum led_brightness value)
-{
-	writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
-}
-
-static struct led_classdev sead3_pled = {
-	.name		= "sead3::pled",
-	.brightness_set = sead3_pled_set,
-	.flags		= LED_CORE_SUSPENDRESUME,
-};
-
-static struct led_classdev sead3_fled = {
-	.name		= "sead3::fled",
-	.brightness_set = sead3_fled_set,
-	.flags		= LED_CORE_SUSPENDRESUME,
-};
-
-static int sead3_led_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &sead3_pled);
-	if (ret < 0)
-		return ret;
-
-	ret = led_classdev_register(&pdev->dev, &sead3_fled);
-	if (ret < 0)
-		led_classdev_unregister(&sead3_pled);
-
-	return ret;
-}
-
-static int sead3_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&sead3_pled);
-	led_classdev_unregister(&sead3_fled);
-
-	return 0;
-}
-
-static struct platform_driver sead3_led_driver = {
-	.probe		= sead3_led_probe,
-	.remove		= sead3_led_remove,
-	.driver		= {
-		.name		= "sead3-led",
-	},
-};
-
-module_platform_driver(sead3_led_driver);
-
-MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
-MODULE_DESCRIPTION("SEAD3 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-versatile.c b/drivers/leds/leds-versatile.c
deleted file mode 100644
index 80553022d661..000000000000
--- a/drivers/leds/leds-versatile.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Driver for the 8 user LEDs found on the RealViews and Versatiles
- * Based on DaVinci's DM365 board code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Linus Walleij <triad@df.lth.se>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-struct versatile_led {
-	void __iomem		*base;
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} versatile_leds[] = {
-	{ "versatile:0", "heartbeat", },
-	{ "versatile:1", "mmc0", },
-	{ "versatile:2", "cpu0" },
-	{ "versatile:3", "cpu1" },
-	{ "versatile:4", "cpu2" },
-	{ "versatile:5", "cpu3" },
-	{ "versatile:6", },
-	{ "versatile:7", },
-};
-
-static void versatile_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(led->base);
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-	writel(reg, led->base);
-}
-
-static enum led_brightness versatile_led_get(struct led_classdev *cdev)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(led->base);
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int versatile_leds_probe(struct platform_device *dev)
-{
-	int i;
-	struct resource *res;
-	void __iomem *base;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&dev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	/* All off */
-	writel(0, base);
-	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
-		struct versatile_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->base = base;
-		led->cdev.name = versatile_leds[i].name;
-		led->cdev.brightness_set = versatile_led_set;
-		led->cdev.brightness_get = versatile_led_get;
-		led->cdev.default_trigger = versatile_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver versatile_leds_driver = {
-	.driver = {
-		.name   = "versatile-leds",
-	},
-	.probe = versatile_leds_probe,
-};
-
-module_platform_driver(versatile_leds_driver);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
-MODULE_DESCRIPTION("ARM Versatile LED driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index 51288a45fbcb..8891e88d54dd 100644
--- a/drivers/leds/trigger/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -14,14 +14,12 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/workqueue.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
 #include "../leds.h"
 
 struct gpio_trig_data {
 	struct led_classdev *led;
-	struct work_struct work;
 
 	unsigned desired_brightness;	/* desired brightness when led is on */
 	unsigned inverted;		/* true when gpio is inverted */
@@ -32,22 +30,8 @@ static irqreturn_t gpio_trig_irq(int irq, void *_led)
 {
 	struct led_classdev *led = _led;
 	struct gpio_trig_data *gpio_data = led->trigger_data;
-
-	/* just schedule_work since gpio_get_value can sleep */
-	schedule_work(&gpio_data->work);
-
-	return IRQ_HANDLED;
-};
-
-static void gpio_trig_work(struct work_struct *work)
-{
-	struct gpio_trig_data *gpio_data = container_of(work,
-			struct gpio_trig_data, work);
 	int tmp;
 
-	if (!gpio_data->gpio)
-		return;
-
 	tmp = gpio_get_value_cansleep(gpio_data->gpio);
 	if (gpio_data->inverted)
 		tmp = !tmp;
@@ -61,6 +45,8 @@ static void gpio_trig_work(struct work_struct *work)
 	} else {
 		led_set_brightness_nosleep(gpio_data->led, LED_OFF);
 	}
+
+	return IRQ_HANDLED;
 }
 
 static ssize_t gpio_trig_brightness_show(struct device *dev,
@@ -120,7 +106,7 @@ static ssize_t gpio_trig_inverted_store(struct device *dev,
 	gpio_data->inverted = inverted;
 
 	/* After inverting, we need to update the LED. */
-	schedule_work(&gpio_data->work);
+	gpio_trig_irq(0, led);
 
 	return n;
 }
@@ -147,7 +133,6 @@ static ssize_t gpio_trig_gpio_store(struct device *dev,
 	ret = sscanf(buf, "%u", &gpio);
 	if (ret < 1) {
 		dev_err(dev, "couldn't read gpio number\n");
-		flush_work(&gpio_data->work);
 		return -EINVAL;
 	}
 
@@ -161,8 +146,8 @@ static ssize_t gpio_trig_gpio_store(struct device *dev,
 		return n;
 	}
 
-	ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
-			IRQF_SHARED | IRQF_TRIGGER_RISING
+	ret = request_threaded_irq(gpio_to_irq(gpio), NULL, gpio_trig_irq,
+			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
 			| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
 	if (ret) {
 		dev_err(dev, "request_irq failed with error %d\n", ret);
@@ -170,6 +155,8 @@ static ssize_t gpio_trig_gpio_store(struct device *dev,
 		if (gpio_data->gpio != 0)
 			free_irq(gpio_to_irq(gpio_data->gpio), led);
 		gpio_data->gpio = gpio;
+		/* After changing the GPIO, we need to update the LED. */
+		gpio_trig_irq(0, led);
 	}
 
 	return ret ? ret : n;
@@ -199,7 +186,6 @@ static void gpio_trig_activate(struct led_classdev *led)
 
 	gpio_data->led = led;
 	led->trigger_data = gpio_data;
-	INIT_WORK(&gpio_data->work, gpio_trig_work);
 	led->activated = true;
 
 	return;
@@ -222,7 +208,6 @@ static void gpio_trig_deactivate(struct led_classdev *led)
 		device_remove_file(led->dev, &dev_attr_gpio);
 		device_remove_file(led->dev, &dev_attr_inverted);
 		device_remove_file(led->dev, &dev_attr_desired_brightness);
-		flush_work(&gpio_data->work);
 		if (gpio_data->gpio != 0)
 			free_irq(gpio_to_irq(gpio_data->gpio), led);
 		kfree(gpio_data);
diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h
index e731f0036329..54e845ffb5ed 100644
--- a/include/linux/platform_data/leds-pca963x.h
+++ b/include/linux/platform_data/leds-pca963x.h
@@ -33,10 +33,16 @@ enum pca963x_blink_type {
 	PCA963X_HW_BLINK,
 };
 
+enum pca963x_direction {
+	PCA963X_NORMAL,
+	PCA963X_INVERTED,
+};
+
 struct pca963x_platform_data {
 	struct led_platform_data leds;
 	enum pca963x_outdrv outdrv;
 	enum pca963x_blink_type blink_type;
+	enum pca963x_direction dir;
 };
 
 #endif /* __LINUX_PCA963X_H*/