[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor

Add support for the Atmel AT91SAM9263 processor.  It is similar to the
AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 files changed, 1425 insertions, 5 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9f11db8af233..2499385e22da 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -14,6 +14,9 @@ config ARCH_AT91SAM9260
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index cf777007847a..2fd4cd4a57f8 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
new file mode 100644
index 000000000000..fae6a821a61b
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&ether_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
new file mode 100644
index 000000000000..d9af7ca58bce
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -0,0 +1,818 @@
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_UHP_BASE,
+		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UHP,
+		.end	= AT91SAM9263_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_UDP,
+		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UDP,
+		.end	= AT91SAM9263_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_EMAC,
+		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_EMAC,
+		.end	= AT91SAM9263_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI0,
+		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI0,
+		.end	= AT91SAM9263_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI1,
+		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI1,
+		.end	= AT91SAM9263_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA12, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA16, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA17, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA18, 1);
+				at91_set_A_periph(AT91_PIN_PA19, 1);
+				at91_set_A_periph(AT91_PIN_PA20, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA1, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA0, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA3, 1);
+				at91_set_A_periph(AT91_PIN_PA4, 1);
+				at91_set_A_periph(AT91_PIN_PA5, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA6, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA22, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA23, 1);
+				at91_set_A_periph(AT91_PIN_PA24, 1);
+				at91_set_A_periph(AT91_PIN_PA25, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA7, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA8, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+				at91_set_A_periph(AT91_PIN_PA10, 1);
+				at91_set_A_periph(AT91_PIN_PA11, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9263_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TWI,
+		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TWI,
+		.end	= AT91SAM9263_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI0,
+		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI0,
+		.end	= AT91SAM9263_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI1,
+		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI1,
+		.end	= AT91SAM9263_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US0,
+		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US0,
+		.end	= AT91SAM9263_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA28, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PA29, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US1,
+		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US1,
+		.end	= AT91SAM9263_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_set_B_periph(AT91_PIN_PD7, 0);		/* RTS1 */
+	at91_set_B_periph(AT91_PIN_PD8, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US2,
+		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US2,
+		.end	= AT91SAM9263_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_set_B_periph(AT91_PIN_PD5, 0);		/* RTS2 */
+	at91_set_B_periph(AT91_PIN_PD6, 0);		/* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9263_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9263_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9263_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9263_dbgu_device;
+				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index baab095f6e32..27e7279b5b39 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -598,7 +598,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 10ee37bf6d4d..bda26221c522 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e095b1fe8d8a..b49bfda53d7f 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void)
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index aade2f72c920..b305cbda8b87 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 812c733ba8ce..8afecb8a98ee 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -913,7 +913,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 		at91_udp_write(udc, AT91_UDP_TXVC, 0);
 		if (cpu_is_at91rm9200())
 			at91_set_gpio_value(udc->board.pullup_pin, 1);
-		else if (cpu_is_at91sam9260()) {
+		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
 			txvc |= AT91_UDP_TXVC_PUON;
@@ -930,7 +930,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 		if (cpu_is_at91rm9200())
 			at91_set_gpio_value(udc->board.pullup_pin, 0);
-		else if (cpu_is_at91sam9260()) {
+		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
 			txvc &= ~AT91_UDP_TXVC_PUON;
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
new file mode 100644
index 000000000000..f4af68ae0ea9
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
new file mode 100644
index 000000000000..6fc6e4be624e
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
index 355eee67ebca..d82631c251f1 100644
--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -131,4 +131,11 @@
 #define			AT91_SMC_PS_16			(2 << 28)
 #define			AT91_SMC_PS_32			(3 << 28)
 
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 762eb41aa675..9efde0dad249 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -20,6 +20,7 @@
 #define ARCH_ID_AT91RM9200	0x09290780
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
 
 
 static inline unsigned long at91_cpu_identify(void)
@@ -46,4 +47,10 @@ static inline unsigned long at91_cpu_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 1637fc4a0d8f..eaaf1c12b753 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -22,6 +22,8 @@
 #include <asm/arch/at91sam9260.h>
 #elif defined(CONFIG_ARCH_AT91SAM9261)
 #include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index b24e364997e1..f41636d607a2 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -32,6 +32,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK	99959500
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #endif
 
 #endif