diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 10:28:45 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 10:28:45 -0800 |
| commit | 540a7c5061f10a07748c89b6741af90db1a07252 (patch) | |
| tree | 27285b973326f894980e029cb5f726e8865e1443 | |
| parent | 718749d56214aa97015fe01b76b6d6dd0c171796 (diff) | |
| parent | 9c4a6b1e42801343535ccab4c190019d9975cce8 (diff) | |
| download | linux-540a7c5061f10a07748c89b6741af90db1a07252.tar.bz2 | |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull first round of SCSI updates from James Bottomley:
"This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas,
megaraid_sas, ses) plus an assortment of minor updates.
There's also an update to ufs which adds new phy drivers and finally a
new logging infrastructure for SCSI"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits)
scsi_logging: return void for dev_printk() functions
scsi: print single-character strings with seq_putc
scsi: merge consecutive seq_puts calls
scsi: replace seq_printf with seq_puts
aha152x: replace seq_printf with seq_puts
advansys: replace seq_printf with seq_puts
scsi: remove SPRINTF macro
sg: remove an unused variable
hpsa: Use local workqueues instead of system workqueues
hpsa: add in P840ar controller model name
hpsa: add in gen9 controller model names
hpsa: detect and report failures changing controller transport modes
hpsa: shorten the wait for the CISS doorbell mode change ack
hpsa: refactor duplicated scan completion code into a new routine
hpsa: move SG descriptor set-up out of hpsa_scatter_gather()
hpsa: do not use function pointers in fast path command submission
hpsa: print CDBs instead of kernel virtual addresses for uncommon errors
hpsa: do not use a void pointer for scsi_cmd field of struct CommandList
hpsa: return failed from device reset/abort handlers
hpsa: check for ctlr lockup after command allocation in main io path
...
92 files changed, 6295 insertions, 2235 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a9f5aed32d39..d2029a462e2c 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2481,7 +2481,6 @@ static void ata_eh_link_report(struct ata_link *link) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; - const u8 *cdb = qc->cdb; char data_buf[20] = ""; char cdb_buf[70] = ""; @@ -2509,16 +2508,15 @@ static void ata_eh_link_report(struct ata_link *link) } if (ata_is_atapi(qc->tf.protocol)) { - if (qc->scsicmd) - scsi_print_command(qc->scsicmd); - else - snprintf(cdb_buf, sizeof(cdb_buf), - "cdb %02x %02x %02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x %02x\n ", - cdb[0], cdb[1], cdb[2], cdb[3], - cdb[4], cdb[5], cdb[6], cdb[7], - cdb[8], cdb[9], cdb[10], cdb[11], - cdb[12], cdb[13], cdb[14], cdb[15]); + const u8 *cdb = qc->cdb; + size_t cdb_len = qc->dev->cdb_len; + + if (qc->scsicmd) { + cdb = qc->scsicmd->cmnd; + cdb_len = qc->scsicmd->cmd_len; + } + __scsi_format_command(cdb_buf, sizeof(cdb_buf), + cdb, cdb_len); } else { const char *descr = ata_get_cmd_descript(cmd->command); if (descr) diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 180a5442fd4b..38552a31304a 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -145,8 +145,11 @@ enclosure_register(struct device *dev, const char *name, int components, if (err) goto err; - for (i = 0; i < components; i++) + for (i = 0; i < components; i++) { edev->component[i].number = -1; + edev->component[i].slot = -1; + edev->component[i].power_status = 1; + } mutex_lock(&container_list_lock); list_add_tail(&edev->node, &container_list); @@ -273,27 +276,26 @@ enclosure_component_find_by_name(struct enclosure_device *edev, static const struct attribute_group *enclosure_component_groups[]; /** - * enclosure_component_register - add a particular component to an enclosure + * enclosure_component_alloc - prepare a new enclosure component * @edev: the enclosure to add the component * @num: the device number * @type: the type of component being added * @name: an optional name to appear in sysfs (leave NULL if none) * - * Registers the component. The name is optional for enclosures that - * give their components a unique name. If not, leave the field NULL - * and a name will be assigned. + * The name is optional for enclosures that give their components a unique + * name. If not, leave the field NULL and a name will be assigned. * * Returns a pointer to the enclosure component or an error. */ struct enclosure_component * -enclosure_component_register(struct enclosure_device *edev, - unsigned int number, - enum enclosure_component_type type, - const char *name) +enclosure_component_alloc(struct enclosure_device *edev, + unsigned int number, + enum enclosure_component_type type, + const char *name) { struct enclosure_component *ecomp; struct device *cdev; - int err, i; + int i; char newname[COMPONENT_NAME_SIZE]; if (number >= edev->components) @@ -327,14 +329,30 @@ enclosure_component_register(struct enclosure_device *edev, cdev->release = enclosure_component_release; cdev->groups = enclosure_component_groups; + return ecomp; +} +EXPORT_SYMBOL_GPL(enclosure_component_alloc); + +/** + * enclosure_component_register - publishes an initialized enclosure component + * @ecomp: component to add + * + * Returns 0 on successful registration, releases the component otherwise + */ +int enclosure_component_register(struct enclosure_component *ecomp) +{ + struct device *cdev; + int err; + + cdev = &ecomp->cdev; err = device_register(cdev); if (err) { ecomp->number = -1; put_device(cdev); - return ERR_PTR(err); + return err; } - return ecomp; + return 0; } EXPORT_SYMBOL_GPL(enclosure_component_register); @@ -417,8 +435,21 @@ static ssize_t components_show(struct device *cdev, } static DEVICE_ATTR_RO(components); +static ssize_t id_show(struct device *cdev, + struct device_attribute *attr, + char *buf) +{ + struct enclosure_device *edev = to_enclosure_device(cdev); + + if (edev->cb->show_id) + return edev->cb->show_id(edev, buf); + return -EINVAL; +} +static DEVICE_ATTR_RO(id); + static struct attribute *enclosure_class_attrs[] = { &dev_attr_components.attr, + &dev_attr_id.attr, NULL, }; ATTRIBUTE_GROUPS(enclosure_class); @@ -553,6 +584,40 @@ static ssize_t set_component_locate(struct device *cdev, return count; } +static ssize_t get_component_power_status(struct device *cdev, + struct device_attribute *attr, + char *buf) +{ + struct enclosure_device *edev = to_enclosure_device(cdev->parent); + struct enclosure_component *ecomp = to_enclosure_component(cdev); + + if (edev->cb->get_power_status) + edev->cb->get_power_status(edev, ecomp); + return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off"); +} + +static ssize_t set_component_power_status(struct device *cdev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct enclosure_device *edev = to_enclosure_device(cdev->parent); + struct enclosure_component *ecomp = to_enclosure_component(cdev); + int val; + + if (strncmp(buf, "on", 2) == 0 && + (buf[2] == '\n' || buf[2] == '\0')) + val = 1; + else if (strncmp(buf, "off", 3) == 0 && + (buf[3] == '\n' || buf[3] == '\0')) + val = 0; + else + return -EINVAL; + + if (edev->cb->set_power_status) + edev->cb->set_power_status(edev, ecomp, val); + return count; +} + static ssize_t get_component_type(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -561,6 +626,20 @@ static ssize_t get_component_type(struct device *cdev, return snprintf(buf, 40, "%s\n", enclosure_type[ecomp->type]); } +static ssize_t get_component_slot(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct enclosure_component *ecomp = to_enclosure_component(cdev); + int slot; + + /* if the enclosure does not override then use 'number' as a stand-in */ + if (ecomp->slot >= 0) + slot = ecomp->slot; + else + slot = ecomp->number; + + return snprintf(buf, 40, "%d\n", slot); +} static DEVICE_ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault, set_component_fault); @@ -570,14 +649,19 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active, set_component_active); static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate, set_component_locate); +static DEVICE_ATTR(power_status, S_IRUGO | S_IWUSR, get_component_power_status, + set_component_power_status); static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL); +static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL); static struct attribute *enclosure_component_attrs[] = { &dev_attr_fault.attr, &dev_attr_status.attr, &dev_attr_active.attr, &dev_attr_locate.attr, + &dev_attr_power_status.attr, &dev_attr_type.attr, + &dev_attr_slot.attr, NULL }; ATTRIBUTE_GROUPS(enclosure_component); diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ccad8809ecb1..26a7623e551e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -277,4 +277,11 @@ config PHY_STIH41X_USB Enable this to support the USB transceiver that is part of STMicroelectronics STiH41x SoC series. +config PHY_QCOM_UFS + tristate "Qualcomm UFS PHY driver" + depends on OF && ARCH_MSM + select GENERIC_PHY + help + Support for UFS PHY on QCOM chipsets. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index aa74f961e44e..cfbb72064516 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -34,3 +34,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h new file mode 100644 index 000000000000..591a39175e8a --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-i.h @@ -0,0 +1,159 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_I_H_ +#define UFS_QCOM_PHY_I_H_ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/phy/phy-qcom-ufs.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/delay.h> + +#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \ +({ \ + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ + might_sleep_if(timeout_us); \ + for (;;) { \ + (val) = readl(addr); \ + if (cond) \ + break; \ + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ + (val) = readl(addr); \ + break; \ + } \ + if (sleep_us) \ + usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \ + { \ + .reg_offset = reg, \ + .cfg_value = val, \ + } + +#define UFS_QCOM_PHY_NAME_LEN 30 + +enum { + MASK_SERDES_START = 0x1, + MASK_PCS_READY = 0x1, +}; + +enum { + OFFSET_SERDES_START = 0x0, +}; + +struct ufs_qcom_phy_stored_attributes { + u32 att; + u32 value; +}; + + +struct ufs_qcom_phy_calibration { + u32 reg_offset; + u32 cfg_value; +}; + +struct ufs_qcom_phy_vreg { + const char *name; + struct regulator *reg; + int max_uA; + int min_uV; + int max_uV; + bool enabled; + bool is_always_on; +}; + +struct ufs_qcom_phy { + struct list_head list; + struct device *dev; + void __iomem *mmio; + void __iomem *dev_ref_clk_ctrl_mmio; + struct clk *tx_iface_clk; + struct clk *rx_iface_clk; + bool is_iface_clk_enabled; + struct clk *ref_clk_src; + struct clk *ref_clk_parent; + struct clk *ref_clk; + bool is_ref_clk_enabled; + bool is_dev_ref_clk_enabled; + struct ufs_qcom_phy_vreg vdda_pll; + struct ufs_qcom_phy_vreg vdda_phy; + struct ufs_qcom_phy_vreg vddp_ref_clk; + unsigned int quirks; + + /* + * If UFS link is put into Hibern8 and if UFS PHY analog hardware is + * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8 + * exit might fail even after powering on UFS PHY analog hardware. + * Enabling this quirk will help to solve above issue by doing + * custom PHY settings just before PHY analog power collapse. + */ + #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0) + + u8 host_ctrl_rev_major; + u16 host_ctrl_rev_minor; + u16 host_ctrl_rev_step; + + char name[UFS_QCOM_PHY_NAME_LEN]; + struct ufs_qcom_phy_calibration *cached_regs; + int cached_regs_table_size; + bool is_powered_on; + struct ufs_qcom_phy_specific_ops *phy_spec_ops; +}; + +/** + * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a + * specific implementation per phy. Each UFS phy, should implement + * those functions according to its spec and requirements + * @calibrate_phy: pointer to a function that calibrate the phy + * @start_serdes: pointer to a function that starts the serdes + * @is_physical_coding_sublayer_ready: pointer to a function that + * checks pcs readiness. returns 0 for success and non-zero for error. + * @set_tx_lane_enable: pointer to a function that enable tx lanes + * @power_control: pointer to a function that controls analog rail of phy + * and writes to QSERDES_RX_SIGDET_CNTRL attribute + */ +struct ufs_qcom_phy_specific_ops { + int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B); + void (*start_serdes)(struct ufs_qcom_phy *phy); + int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); + void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); + void (*power_control)(struct ufs_qcom_phy *phy, bool val); +}; + +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); +int ufs_qcom_phy_power_on(struct phy *generic_phy); +int ufs_qcom_phy_power_off(struct phy *generic_phy); +int ufs_qcom_phy_exit(struct phy *generic_phy); +int ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy); +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops); +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B, + bool is_rate_B); +#endif diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c new file mode 100644 index 000000000000..f5fc50a9fce7 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-qmp-14nm.h" + +#define UFS_PHY_NAME "ufs_phy_qmp_14nm" +#define UFS_PHY_VDDA_PHY_UV (925000) + +static +int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + bool is_rate_B) +{ + int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A); + int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); + int err; + + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A, + tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B); + + if (err) + dev_err(ufs_qcom_phy->dev, + "%s: ufs_qcom_phy_calibrate() failed %d\n", + __func__, err); + return err; +} + +static +void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) +{ + phy_common->quirks = + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; +} + +static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) +{ + struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy); + struct ufs_qcom_phy *phy_common = &phy->common_cfg; + int err; + + err = ufs_qcom_phy_init_clks(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", + __func__, err); + goto out; + } + + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", + __func__, err); + goto out; + } + phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV; + phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV; + + ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) +{ + writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * Before any transactions involving PHY, ensure PHY knows + * that it's analog rail is powered ON (or OFF). + */ + mb(); +} + +static inline +void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) +{ + /* + * 14nm PHY does not have TX_LANE_ENABLE register. + * Implement this function so as not to propagate error to caller. + */ +} + +static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy) +{ + u32 tmp; + + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); + tmp &= ~MASK_SERDES_START; + tmp |= (1 << OFFSET_SERDES_START); + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); + /* Ensure register value is committed */ + mb(); +} + +static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) +{ + int err = 0; + u32 val; + + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, + val, (val & MASK_PCS_READY), 10, 1000000); + if (err) + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", + __func__, err); + return err; +} + +static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { + .init = ufs_qcom_phy_qmp_14nm_init, + .exit = ufs_qcom_phy_exit, + .power_on = ufs_qcom_phy_power_on, + .power_off = ufs_qcom_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { + .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate, + .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, + .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, + .power_control = ufs_qcom_phy_qmp_14nm_power_control, +}; + +static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct ufs_qcom_phy_qmp_14nm *phy; + int err = 0; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + err = -ENOMEM; + goto out; + } + + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, + &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops); + + if (!generic_phy) { + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", + __func__); + err = -EIO; + goto out; + } + + phy_set_drvdata(generic_phy, phy); + + strlcpy(phy->common_cfg.name, UFS_PHY_NAME, + sizeof(phy->common_cfg.name)); + +out: + return err; +} + +static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy = to_phy(dev); + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int err = 0; + + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); + if (err) + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", + __func__, err); + + return err; +} + +static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = { + {.compatible = "qcom,ufs-phy-qmp-14nm"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match); + +static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = { + .probe = ufs_qcom_phy_qmp_14nm_probe, + .remove = ufs_qcom_phy_qmp_14nm_remove, + .driver = { + .of_match_table = ufs_qcom_phy_qmp_14nm_of_match, + .name = "ufs_qcom_phy_qmp_14nm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ufs_qcom_phy_qmp_14nm_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/phy-qcom-ufs-qmp-14nm.h new file mode 100644 index 000000000000..3aefdbacbcd0 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_QMP_14NM_H_ +#define UFS_QCOM_PHY_QMP_14NM_H_ + +#include "phy-qcom-ufs-i.h" + +/* QCOM UFS PHY control registers */ +#define COM_OFF(x) (0x000 + x) +#define PHY_OFF(x) (0xC00 + x) +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) + +/* UFS PHY QSERDES COM registers */ +#define QSERDES_COM_BG_TIMER COM_OFF(0x0C) +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) +#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) +#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) +#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) +#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) +#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) +#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) +#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) +#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) +#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) +#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) +#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) +#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) +#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) +#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) +#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) +#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) +#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) +#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) +#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) +#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) +#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) +#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) +#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) +#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) +#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) +#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) +#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) +#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) +#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) +#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) +#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) +#define QSERDES_COM_CLK_SELECT COM_OFF(0x174) +#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) +#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) +#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) +#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) +#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) +#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) + +/* UFS PHY registers */ +#define UFS_PHY_PHY_START PHY_OFF(0x00) +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) + +/* UFS PHY TX registers */ +#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) +#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) + +/* UFS PHY RX registers */ +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) +#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) +#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) +#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) +#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) +#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) +#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) +#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) +#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) + +/* + * This structure represents the 14nm specific phy. + * common_cfg MUST remain the first field in this structure + * in case extra fields are added. This way, when calling + * get_ufs_qcom_phy() of generic phy, we can extract the + * common phy structure (struct ufs_qcom_phy) out of it + * regardless of the relevant specific phy. + */ +struct ufs_qcom_phy_qmp_14nm { + struct ufs_qcom_phy common_cfg; +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), +}; + +#endif diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c new file mode 100644 index 000000000000..8332f96b2c4a --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c @@ -0,0 +1,257 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-qmp-20nm.h" + +#define UFS_PHY_NAME "ufs_phy_qmp_20nm" + +static +int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + bool is_rate_B) +{ + struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; + int tbl_size_A, tbl_size_B; + u8 major = ufs_qcom_phy->host_ctrl_rev_major; + u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; + u16 step = ufs_qcom_phy->host_ctrl_rev_step; + int err; + + if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); + tbl_A = phy_cal_table_rate_A_1_2_0; + } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); + tbl_A = phy_cal_table_rate_A_1_3_0; + } else { + dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", + __func__); + err = -ENODEV; + goto out; + } + + tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); + tbl_B = phy_cal_table_rate_B; + + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, + tbl_B, tbl_size_B, is_rate_B); + + if (err) + dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", + __func__, err); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) +{ + phy_common->quirks = + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; +} + +static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) +{ + struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy); + struct ufs_qcom_phy *phy_common = &phy->common_cfg; + int err = 0; + + err = ufs_qcom_phy_init_clks(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", + __func__, err); + goto out; + } + + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", + __func__, err); + goto out; + } + + ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) +{ + bool hibern8_exit_after_pwr_collapse = phy->quirks & + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; + + if (val) { + writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * Before any transactions involving PHY, ensure PHY knows + * that it's analog rail is powered ON. + */ + mb(); + + if (hibern8_exit_after_pwr_collapse) { + /* + * Give atleast 1us delay after restoring PHY analog + * power. + */ + usleep_range(1, 2); + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x08, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure workaround is deactivated before proceeding + * with normal PHY operations. + */ + mb(); + } + } else { + if (hibern8_exit_after_pwr_collapse) { + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x02, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure that above workaround is activated before + * PHY analog power collapse. + */ + mb(); + } + + writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * ensure that PHY knows its PHY analog rail is going + * to be powered down + */ + mb(); + } +} + +static +void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) +{ + writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, + phy->mmio + UFS_PHY_TX_LANE_ENABLE); + mb(); +} + +static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) +{ + u32 tmp; + + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); + tmp &= ~MASK_SERDES_START; + tmp |= (1 << OFFSET_SERDES_START); + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); + mb(); +} + +static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) +{ + int err = 0; + u32 val; + + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, + val, (val & MASK_PCS_READY), 10, 1000000); + if (err) + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", + __func__, err); + return err; +} + +static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { + .init = ufs_qcom_phy_qmp_20nm_init, + .exit = ufs_qcom_phy_exit, + .power_on = ufs_qcom_phy_power_on, + .power_off = ufs_qcom_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { + .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate, + .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, + .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, + .power_control = ufs_qcom_phy_qmp_20nm_power_control, +}; + +static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct ufs_qcom_phy_qmp_20nm *phy; + int err = 0; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + err = -ENOMEM; + goto out; + } + + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, + &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); + + if (!generic_phy) { + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", + __func__); + err = -EIO; + goto out; + } + + phy_set_drvdata(generic_phy, phy); + + strlcpy(phy->common_cfg.name, UFS_PHY_NAME, + sizeof(phy->common_cfg.name)); + +out: + return err; +} + +static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy = to_phy(dev); + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int err = 0; + + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); + if (err) + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", + __func__, err); + + return err; +} + +static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { + {.compatible = "qcom,ufs-phy-qmp-20nm"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); + +static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { + .probe = ufs_qcom_phy_qmp_20nm_probe, + .remove = ufs_qcom_phy_qmp_20nm_remove, + .driver = { + .of_match_table = ufs_qcom_phy_qmp_20nm_of_match, + .name = "ufs_qcom_phy_qmp_20nm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/phy-qcom-ufs-qmp-20nm.h new file mode 100644 index 000000000000..4f3076bb3d71 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.h @@ -0,0 +1,235 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_QMP_20NM_H_ +#define UFS_QCOM_PHY_QMP_20NM_H_ + +#include "phy-qcom-ufs-i.h" + +/* QCOM UFS PHY control registers */ + +#define COM_OFF(x) (0x000 + x) +#define PHY_OFF(x) (0xC00 + x) +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) + +/* UFS PHY PLL block registers */ +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0) +#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04) +#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14) +#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24) +#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28) +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30) +#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34) +#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38) +#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C) +#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48) +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C) +#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50) +#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90) +#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94) +#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98) +#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C) +#define QSERDES_COM_BGTC COM_OFF(0xA0) +#define QSERDES_COM_DEC_START1 COM_OFF(0xAC) +#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0) +#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8) +#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC) +#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100) +#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104) +#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108) +#define QSERDES_COM_DEC_START2 COM_OFF(0x10C) +#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110) +#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114) +#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118) + +/* TX LANE n (0, 1) registers */ +#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08) +#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C) +#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54) + +/* RX LANE n (0, 1) registers */ +#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0) +#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8) +#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8) +#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC) +#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0) +#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4) +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC) +#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC) +#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100) + +/* UFS PHY registers */ +#define UFS_PHY_PHY_START PHY_OFF(0x00) +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4) +#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44) +#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08) +#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C) +#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10) +#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14) +#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34) +#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38) +#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C) +#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40) +#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68) +#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28) +#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C) +#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48) +#define UFS_PHY_PLL_CNTL PHY_OFF(0x50) +#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54) +#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C) +#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58) +#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60) +#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64) +#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C) +#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4) +#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0) +#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8) +#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4) +#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC) +#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8) +#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC) +#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100) +#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c) +#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160) +#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7) +#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6) +#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5) +#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4) +#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3) +#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2) +#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1) +#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0) +#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164) +#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168) +#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C) +#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170) +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174) + +#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3 + +/* + * This structure represents the 20nm specific phy. + * common_cfg MUST remain the first field in this structure + * in case extra fields are added. This way, when calling + * get_ufs_qcom_phy() of generic phy, we can extract the + * common phy structure (struct ufs_qcom_phy) out of it + * regardless of the relevant specific phy. + */ +struct ufs_qcom_phy_qmp_20nm { + struct ufs_qcom_phy common_cfg; +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e), +}; + +#endif diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c new file mode 100644 index 000000000000..44ee983d57fe --- /dev/null +++ b/drivers/phy/phy-qcom-ufs.c @@ -0,0 +1,745 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-i.h" + +#define MAX_PROP_NAME 32 +#define VDDA_PHY_MIN_UV 1000000 +#define VDDA_PHY_MAX_UV 1000000 +#define VDDA_PLL_MIN_UV 1800000 +#define VDDA_PLL_MAX_UV 1800000 +#define VDDP_REF_CLK_MIN_UV 1200000 +#define VDDP_REF_CLK_MAX_UV 1200000 + +static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *, bool); +static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *); +static int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common); + +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, + int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, + int tbl_size_B, bool is_rate_B) +{ + int i; + int ret = 0; + + if (!tbl_A) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_A; i++) + writel_relaxed(tbl_A[i].cfg_value, + ufs_qcom_phy->mmio + tbl_A[i].reg_offset); + + /* + * In case we would like to work in rate B, we need + * to override a registers that were configured in rate A table + * with registers of rate B table. + * table. + */ + if (is_rate_B) { + if (!tbl_B) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", + __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_B; i++) + writel_relaxed(tbl_B[i].cfg_value, + ufs_qcom_phy->mmio + tbl_B[i].reg_offset); + } + + /* flush buffered writes */ + mb(); + +out: + return ret; +} + +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops) +{ + int err; + struct device *dev = &pdev->dev; + struct phy *generic_phy = NULL; + struct phy_provider *phy_provider; + + err = ufs_qcom_phy_base_init(pdev, common_cfg); + if (err) { + dev_err(dev, "%s: phy base init failed %d\n", __func__, err); + goto out; + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "%s: failed to register phy %d\n", __func__, err); + goto out; + } + + generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); + if (IS_ERR(generic_phy)) { + err = PTR_ERR(generic_phy); + dev_err(dev, "%s: failed to create phy %d\n", __func__, err); + goto out; + } + + common_cfg->phy_spec_ops = phy_spec_ops; + common_cfg->dev = dev; + +out: + return generic_phy; +} + +/* + * This assumes the embedded phy structure inside generic_phy is of type + * struct ufs_qcom_phy. In order to function properly it's crucial + * to keep the embedded struct "struct ufs_qcom_phy common_cfg" + * as the first inside generic_phy. + */ +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) +{ + return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); +} + +static +int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common) +{ + struct device *dev = &pdev->dev; + struct resource *res; + int err = 0; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); + if (!res) { + dev_err(dev, "%s: phy_mem resource not found\n", __func__); + err = -ENOMEM; + goto out; + } + + phy_common->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->mmio)) { + err = PTR_ERR((void const *)phy_common->mmio); + phy_common->mmio = NULL; + dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", + __func__, err); + goto out; + } + + /* "dev_ref_clk_ctrl_mem" is optional resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dev_ref_clk_ctrl_mem"); + if (!res) { + dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n", + __func__); + goto out; + } + + phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) { + err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio); + phy_common->dev_ref_clk_ctrl_mmio = NULL; + dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n", + __func__, err); + } + +out: + return err; +} + +static int __ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out, bool err_print) +{ + struct clk *clk; + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + if (err_print) + dev_err(dev, "failed to get %s err %d", name, err); + } else { + *clk_out = clk; + } + + return err; +} + +static +int ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out) +{ + return __ufs_qcom_phy_clk_get(phy, name, clk_out, true); +} + +int +ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk", + &phy_common->tx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk", + &phy_common->rx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src", + &phy_common->ref_clk_src); + if (err) + goto out; + + /* + * "ref_clk_parent" is optional hence don't abort init if it's not + * found. + */ + __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent", + &phy_common->ref_clk_parent, false); + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk", + &phy_common->ref_clk); + +out: + return err; +} + +int +ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll, + "vdda-pll"); + if (err) + goto out; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy, + "vdda-phy"); + + if (err) + goto out; + + /* vddp-ref-clk-* properties are optional */ + __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk, + "vddp-ref-clk", true); +out: + return err; +} + +static int __ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) +{ + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + char prop_name[MAX_PROP_NAME]; + + vreg->name = kstrdup(name, GFP_KERNEL); + if (!vreg->name) { + err = -ENOMEM; + goto out; + } + + vreg->reg = devm_regulator_get(dev, name); + if (IS_ERR(vreg->reg)) { + err = PTR_ERR(vreg->reg); + vreg->reg = NULL; + if (!optional) + dev_err(dev, "failed to get %s, %d\n", name, err); + goto out; + } + + if (dev->of_node) { + snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); + err = of_property_read_u32(dev->of_node, + prop_name, &vreg->max_uA); + if (err && err != -EINVAL) { + dev_err(dev, "%s: failed to read %s\n", + __func__, prop_name); + goto out; + } else if (err == -EINVAL || !vreg->max_uA) { + if (regulator_count_voltages(vreg->reg) > 0) { + dev_err(dev, "%s: %s is mandatory\n", + __func__, prop_name); + goto out; + } + err = 0; + } + snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); + if (of_get_property(dev->of_node, prop_name, NULL)) + vreg->is_always_on = true; + else + vreg->is_always_on = false; + } + + if (!strcmp(name, "vdda-pll")) { + vreg->max_uV = VDDA_PLL_MAX_UV; + vreg->min_uV = VDDA_PLL_MIN_UV; + } else if (!strcmp(name, "vdda-phy")) { + vreg->max_uV = VDDA_PHY_MAX_UV; + vreg->min_uV = VDDA_PHY_MIN_UV; + } else if (!strcmp(name, "vddp-ref-clk")) { + vreg->max_uV = VDDP_REF_CLK_MAX_UV; + vreg->min_uV = VDDP_REF_CLK_MIN_UV; + } + +out: + if (err) + kfree(vreg->name); + return err; +} + +static int ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name) +{ + return __ufs_qcom_phy_init_vreg(phy, vreg, name, false); +} + +static +int ufs_qcom_phy_cfg_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, bool on) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + int min_uV; + int uA_load; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + BUG_ON(!vreg); + + if (regulator_count_voltages(reg) > 0) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, "%s: %s set voltage failed, err=%d\n", + __func__, name, ret); + goto out; + } + uA_load = on ? vreg->max_uA : 0; + ret = regulator_set_optimum_mode(reg, uA_load); + if (ret >= 0) { + /* + * regulator_set_optimum_mode() returns new regulator + * mode upon success. + */ + ret = 0; + } else { + dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", + __func__, name, uA_load, ret); + goto out; + } + } +out: + return ret; +} + +static +int ufs_qcom_phy_enable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true); + if (ret) { + dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", + __func__, ret); + goto out; + } + + ret = regulator_enable(vreg->reg); + if (ret) { + dev_err(dev, "%s: enable failed, err=%d\n", + __func__, ret); + goto out; + } + + vreg->enabled = true; +out: + return ret; +} + +int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy) +{ + int ret = 0; + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) + goto out; + + /* + * reference clock is propagated in a daisy-chained manner from + * source to phy, so ungate them at each stage. + */ + ret = clk_prepare_enable(phy->ref_clk_src); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", + __func__, ret); + goto out; + } + + /* + * "ref_clk_parent" is optional clock hence make sure that clk reference + * is available before trying to enable the clock. + */ + if (phy->ref_clk_parent) { + ret = clk_prepare_enable(phy->ref_clk_parent); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", + __func__, ret); + goto out_disable_src; + } + } + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(phy->dev, "%s: ref_clk enable failed %d\n", + __func__, ret); + goto out_disable_parent; + } + + phy->is_ref_clk_enabled = true; + goto out; + +out_disable_parent: + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); +out_disable_src: + clk_disable_unprepare(phy->ref_clk_src); +out: + return ret; +} + +static +int ufs_qcom_phy_disable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || !vreg->enabled || vreg->is_always_on) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufs_qcom_phy_cfg_vreg(phy, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) { + clk_disable_unprepare(phy->ref_clk); + /* + * "ref_clk_parent" is optional clock hence make sure that clk + * reference is available before trying to disable the clock. + */ + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); + clk_disable_unprepare(phy->ref_clk_src); + phy->is_ref_clk_enabled = false; + } +} + +#define UFS_REF_CLK_EN (1 << 5) + +static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->dev_ref_clk_ctrl_mmio && + (enable ^ phy->is_dev_ref_clk_enabled)) { + u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); + + if (enable) + temp |= UFS_REF_CLK_EN; + else + temp &= ~UFS_REF_CLK_EN; + + /* + * If we are here to disable this clock immediately after + * entering into hibern8, we need to make sure that device + * ref_clk is active atleast 1us after the hibern8 enter. + */ + if (!enable) + udelay(1); + + writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); + /* ensure that ref_clk is enabled/disabled before we return */ + wmb(); + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for atleast 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + phy->is_dev_ref_clk_enabled = enable; + } +} + +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); +} + +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); +} + +/* Turn ON M-PHY RMMI interface clocks */ +int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (phy->is_iface_clk_enabled) + goto out; + + ret = clk_prepare_enable(phy->tx_iface_clk); + if (ret) { + dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", + __func__, ret); + goto out; + } + ret = clk_prepare_enable(phy->rx_iface_clk); + if (ret) { + clk_disable_unprepare(phy->tx_iface_clk); + dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", + __func__, ret); + goto out; + } + phy->is_iface_clk_enabled = true; + +out: + return ret; +} + +/* Turn OFF M-PHY RMMI interface clocks */ +void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_iface_clk_enabled) { + clk_disable_unprepare(phy->tx_iface_clk); + clk_disable_unprepare(phy->rx_iface_clk); + phy->is_iface_clk_enabled = false; + } +} + +int ufs_qcom_phy_start_serdes(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { + dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); + } + + return ret; +} + +int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { + dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, + tx_lanes); + } + + return ret; +} + +void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, + u8 major, u16 minor, u16 step) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + ufs_qcom_phy->host_ctrl_rev_major = major; + ufs_qcom_phy->host_ctrl_rev_minor = minor; + ufs_qcom_phy->host_ctrl_rev_step = step; +} + +int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) { + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ret = ufs_qcom_phy->phy_spec_ops-> + calibrate_phy(ufs_qcom_phy, is_rate_B); + if (ret) + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n", + __func__, ret); + } + + return ret; +} + +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy) +{ + phy_power_off(generic_phy); + + kfree(ufs_qcom_phy->vdda_pll.name); + kfree(ufs_qcom_phy->vdda_phy.name); + + return 0; +} + +int ufs_qcom_phy_exit(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (ufs_qcom_phy->is_powered_on) + phy_power_off(generic_phy); + + return 0; +} + +int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { + dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", + __func__); + return -ENOTSUPP; + } + + return ufs_qcom_phy->phy_spec_ops-> + is_physical_coding_sublayer_ready(ufs_qcom_phy); +} + +int ufs_qcom_phy_power_on(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + struct device *dev = phy_common->dev; + int err; + + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy); + if (err) { + dev_err(dev, "%s enable vdda_phy failed, err=%d\n", + __func__, err); + goto out; + } + + phy_common->phy_spec_ops->power_control(phy_common, true); + + /* vdda_pll also enables ref clock LDOs so enable it first */ + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll); + if (err) { + dev_err(dev, "%s enable vdda_pll failed, err=%d\n", + __func__, err); + goto out_disable_phy; + } + + err = ufs_qcom_phy_enable_ref_clk(generic_phy); + if (err) { + dev_err(dev, "%s enable phy ref clock failed, err=%d\n", + __func__, err); + goto out_disable_pll; + } + + /* enable device PHY ref_clk pad rail */ + if (phy_common->vddp_ref_clk.reg) { + err = ufs_qcom_phy_enable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + if (err) { + dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", + __func__, err); + goto out_disable_ref_clk; + } + } + + phy_common->is_powered_on = true; + goto out; + +out_disable_ref_clk: + ufs_qcom_phy_disable_ref_clk(generic_phy); +out_disable_pll: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); +out_disable_phy: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); +out: + return err; +} + +int ufs_qcom_phy_power_off(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + + phy_common->phy_spec_ops->power_control(phy_common, false); + + if (phy_common->vddp_ref_clk.reg) + ufs_qcom_phy_disable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + ufs_qcom_phy_disable_ref_clk(generic_phy); + + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); + phy_common->is_powered_on = false; + + return 0; +} diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index cd4129ff7ae4..7600639db4c4 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -608,7 +608,8 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed) } /* Load rest of compatibility struct */ - strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION)); + strlcpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, + sizeof(tw_dev->tw_compat_info.driver_version)); tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL; tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH; tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD; diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index 8d66a6469e29..c7be7bb37209 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -3485,7 +3485,7 @@ static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, "\n\ Current Driver Queue Depth: %d\n\ Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs); - seq_printf(m, "\n\n\ + seq_puts(m, "\n\n\ DATA TRANSFER STATISTICS\n\ \n\ Target Tagged Queuing Queue Depth Active Attempted Completed\n\ @@ -3500,7 +3500,7 @@ Target Tagged Queuing Queue Depth Active Attempted Completed\n\ seq_printf(m, " %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete); } - seq_printf(m, "\n\ + seq_puts(m, "\n\ Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\ ====== ============= ============== =================== ===================\n"); for (tgt = 0; tgt < adapter->maxdev; tgt++) { @@ -3517,7 +3517,7 @@ Target Read Commands Write Commands Total Bytes Read Total Bytes Written\ else seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units); } - seq_printf(m, "\n\ + seq_puts(m, "\n\ Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\ ====== ======= ========= ========= ========= ========= =========\n"); for (tgt = 0; tgt < adapter->maxdev; tgt++) { @@ -3533,7 +3533,7 @@ Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\ tgt_stats[tgt].write_sz_buckets[0], tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]); } - seq_printf(m, "\n\ + seq_puts(m, "\n\ Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\ ====== ======= ========= ========= ========= ========= =========\n"); for (tgt = 0; tgt < adapter->maxdev; tgt++) { @@ -3549,7 +3549,7 @@ Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\ tgt_stats[tgt].write_sz_buckets[5], tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]); } - seq_printf(m, "\n\n\ + seq_puts(m, "\n\n\ ERROR RECOVERY STATISTICS\n\ \n\ Command Aborts Bus Device Resets Host Adapter Resets\n\ diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 9c92f415229f..b021bcb88537 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -201,12 +201,12 @@ config SCSI_ENCLOSURE certain enclosure conditions to be reported and is not required. config SCSI_CONSTANTS - bool "Verbose SCSI error reporting (kernel size +=12K)" + bool "Verbose SCSI error reporting (kernel size +=75K)" depends on SCSI help The error messages regarding your SCSI hardware will be easier to understand if you say Y here; it will enlarge your kernel by about - 12 KB. If in doubt, say Y. + 75 KB. If in doubt, say Y. config SCSI_LOGGING bool "SCSI logging facility" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 58158f11ed7b..dee160a4f163 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -159,15 +159,15 @@ obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/ # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o - -scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ +scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \ scsicam.o scsi_error.o scsi_lib.o +scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o -scsi_mod-y += scsi_trace.o +scsi_mod-y += scsi_trace.o scsi_logging.o scsi_mod-$(CONFIG_PM) += scsi_pm.o hv_storvsc-y := storvsc_drv.o diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 36244d63def2..8981701802ca 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -716,8 +716,6 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance, } #endif -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m, ## args) static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m); static @@ -734,19 +732,19 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m, hostdata = (struct NCR5380_hostdata *) instance->hostdata; #ifdef PSEUDO_DMA - SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n", + seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n", hostdata->spin_max_w, hostdata->spin_max_r); #endif spin_lock_irq(instance->host_lock); if (!hostdata->connected) - SPRINTF("scsi%d: no currently connected command\n", instance->host_no); + seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no); else lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m); - SPRINTF("scsi%d: issue_queue\n", instance->host_no); + seq_printf(m, "scsi%d: issue_queue\n", instance->host_no); for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) lprint_Scsi_Cmnd(ptr, m); - SPRINTF("scsi%d: disconnected_queue\n", instance->host_no); + seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no); for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) lprint_Scsi_Cmnd(ptr, m); spin_unlock_irq(instance->host_lock); @@ -755,8 +753,8 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m, static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m) { - SPRINTF("scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun); - SPRINTF(" command = "); + seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun); + seq_puts(m, " command = "); lprint_command(cmd->cmnd, m); } @@ -765,13 +763,13 @@ static void lprint_command(unsigned char *command, struct seq_file *m) int i, s; lprint_opcode(command[0], m); for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - SPRINTF("%02x ", command[i]); - SPRINTF("\n"); + seq_printf(m, "%02x ", command[i]); + seq_putc(m, '\n'); } static void lprint_opcode(int opcode, struct seq_file *m) { - SPRINTF("%2d (0x%02x)", opcode, opcode); + seq_printf(m, "%2d (0x%02x)", opcode, opcode); } diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 2c5ce48c8f95..ae95e347f37d 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -2880,7 +2880,7 @@ static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost) chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; } - seq_printf(m, "Target IDs Detected:"); + seq_puts(m, "Target IDs Detected:"); for (i = 0; i <= ADV_MAX_TID; i++) { if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) seq_printf(m, " %X,", i); @@ -2896,18 +2896,16 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost) struct asc_board *boardp = shost_priv(shost); ushort major, minor, letter; - seq_printf(m, "\nROM BIOS Version: "); + seq_puts(m, "\nROM BIOS Version: "); /* * If the BIOS saved a valid signature, then fill in * the BIOS code segment base address. */ if (boardp->bios_signature != 0x55AA) { - seq_printf(m, "Disabled or Pre-3.1\n"); - seq_printf(m, - "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n"); - seq_printf(m, - "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n"); + seq_puts(m, "Disabled or Pre-3.1\n" + "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n" + "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n"); } else { major = (boardp->bios_version >> 12) & 0xF; minor = (boardp->bios_version >> 8) & 0xF; @@ -2923,10 +2921,8 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost) */ if (major < 3 || (major <= 3 && minor < 1) || (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) { - seq_printf(m, - "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n"); - seq_printf(m, - "ftp://ftp.connectcom.net/pub\n"); + seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n" + "ftp://ftp.connectcom.net/pub\n"); } } } @@ -3056,11 +3052,10 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost == ASC_TRUE) seq_printf(m, " Serial Number: %s\n", serialstr); else if (ep->adapter_info[5] == 0xBB) - seq_printf(m, - " Default Settings Used for EEPROM-less Adapter.\n"); + seq_puts(m, + " Default Settings Used for EEPROM-less Adapter.\n"); else - seq_printf(m, - " Serial Number Signature Not Present.\n"); + seq_puts(m, " Serial Number Signature Not Present.\n"); seq_printf(m, " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", @@ -3070,34 +3065,30 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost seq_printf(m, " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam); - seq_printf(m, " Target ID: "); + seq_puts(m, " Target ID: "); for (i = 0; i <= ASC_MAX_TID; i++) seq_printf(m, " %d", i); - seq_printf(m, "\n"); - seq_printf(m, " Disconnects: "); + seq_puts(m, "\n Disconnects: "); for (i = 0; i <= ASC_MAX_TID; i++) seq_printf(m, " %c", (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); - seq_printf(m, " Command Queuing: "); + seq_puts(m, "\n Command Queuing: "); for (i = 0; i <= ASC_MAX_TID; i++) seq_printf(m, " %c", (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); - seq_printf(m, " Start Motor: "); + seq_puts(m, "\n Start Motor: "); for (i = 0; i <= ASC_MAX_TID; i++) seq_printf(m, " %c", (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); - seq_printf(m, " Synchronous Transfer:"); + seq_puts(m, "\n Synchronous Transfer:"); for (i = 0; i <= ASC_MAX_TID; i++) seq_printf(m, " %c", (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); #ifdef CONFIG_ISA if (asc_dvc_varp->bus_type & ASC_IS_ISA) { @@ -3151,7 +3142,7 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE) seq_printf(m, " Serial Number: %s\n", serialstr); else - seq_printf(m, " Serial Number Signature Not Present.\n"); + seq_puts(m, " Serial Number Signature Not Present.\n"); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) seq_printf(m, @@ -3209,10 +3200,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost ep_38C1600->termination_lvd, termstr, ep_38C1600->bios_ctrl); - seq_printf(m, " Target ID: "); + seq_puts(m, " Target ID: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %X", i); - seq_printf(m, "\n"); + seq_putc(m, '\n'); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { word = ep_3550->disc_enable; @@ -3221,11 +3212,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost } else { word = ep_38C1600->disc_enable; } - seq_printf(m, " Disconnects: "); + seq_puts(m, " Disconnects: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { word = ep_3550->tagqng_able; @@ -3234,11 +3225,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost } else { word = ep_38C1600->tagqng_able; } - seq_printf(m, " Command Queuing: "); + seq_puts(m, " Command Queuing: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { word = ep_3550->start_motor; @@ -3247,28 +3238,28 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost } else { word = ep_38C1600->start_motor; } - seq_printf(m, " Start Motor: "); + seq_puts(m, " Start Motor: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { - seq_printf(m, " Synchronous Transfer:"); + seq_puts(m, " Synchronous Transfer:"); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); } if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { - seq_printf(m, " Ultra Transfer: "); + seq_puts(m, " Ultra Transfer: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); } if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { @@ -3278,16 +3269,15 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost } else { word = ep_38C1600->wdtr_able; } - seq_printf(m, " Wide Transfer: "); + seq_puts(m, " Wide Transfer: "); for (i = 0; i <= ADV_MAX_TID; i++) seq_printf(m, " %c", (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); - seq_printf(m, "\n"); + seq_putc(m, '\n'); if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 || adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) { - seq_printf(m, - " Synchronous Transfer Speed (Mhz):\n "); + seq_puts(m, " Synchronous Transfer Speed (Mhz):\n "); for (i = 0; i <= ADV_MAX_TID; i++) { char *speed_str; @@ -3325,10 +3315,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost } seq_printf(m, "%X:%s ", i, speed_str); if (i == 7) - seq_printf(m, "\n "); + seq_puts(m, "\n "); sdtr_speed >>= 4; } - seq_printf(m, "\n"); + seq_putc(m, '\n'); } } @@ -3403,7 +3393,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, " Total Command Pending: %d\n", v->cur_total_qng); - seq_printf(m, " Command Queuing:"); + seq_puts(m, " Command Queuing:"); for (i = 0; i <= ASC_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3413,10 +3403,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) i, (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); } - seq_printf(m, "\n"); /* Current number of commands waiting for a device. */ - seq_printf(m, " Command Queue Pending:"); + seq_puts(m, "\n Command Queue Pending:"); for (i = 0; i <= ASC_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3424,10 +3413,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) } seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]); } - seq_printf(m, "\n"); /* Current limit on number of commands that can be sent to a device. */ - seq_printf(m, " Command Queue Limit:"); + seq_puts(m, "\n Command Queue Limit:"); for (i = 0; i <= ASC_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3435,10 +3423,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) } seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]); } - seq_printf(m, "\n"); /* Indicate whether the device has returned queue full status. */ - seq_printf(m, " Command Queue Full:"); + seq_puts(m, "\n Command Queue Full:"); for (i = 0; i <= ASC_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3450,9 +3437,8 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) else seq_printf(m, " %X:N", i); } - seq_printf(m, "\n"); - seq_printf(m, " Synchronous Transfer:"); + seq_puts(m, "\n Synchronous Transfer:"); for (i = 0; i <= ASC_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3462,7 +3448,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) i, (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); for (i = 0; i <= ASC_MAX_TID; i++) { uchar syn_period_ix; @@ -3476,7 +3462,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, " %X:", i); if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) { - seq_printf(m, " Asynchronous"); + seq_puts(m, " Asynchronous"); } else { syn_period_ix = (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - @@ -3494,16 +3480,15 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) } if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { - seq_printf(m, "*\n"); + seq_puts(m, "*\n"); renegotiate = 1; } else { - seq_printf(m, "\n"); + seq_putc(m, '\n'); } } if (renegotiate) { - seq_printf(m, - " * = Re-negotiation pending before next command.\n"); + seq_puts(m, " * = Re-negotiation pending before next command.\n"); } } @@ -3548,7 +3533,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) c->mcode_date, c->mcode_version); AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); - seq_printf(m, " Queuing Enabled:"); + seq_puts(m, " Queuing Enabled:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3559,9 +3544,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) i, (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); } - seq_printf(m, "\n"); - seq_printf(m, " Queue Limit:"); + seq_puts(m, "\n Queue Limit:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3573,9 +3557,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, " %X:%d", i, lrambyte); } - seq_printf(m, "\n"); - seq_printf(m, " Command Pending:"); + seq_puts(m, "\n Command Pending:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3587,10 +3570,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, " %X:%d", i, lrambyte); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); - seq_printf(m, " Wide Enabled:"); + seq_puts(m, " Wide Enabled:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3601,10 +3584,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) i, (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done); - seq_printf(m, " Transfer Bit Width:"); + seq_puts(m, " Transfer Bit Width:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3620,14 +3603,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) && (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { - seq_printf(m, "*"); + seq_putc(m, '*'); renegotiate = 1; } } - seq_printf(m, "\n"); + seq_putc(m, '\n'); AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); - seq_printf(m, " Synchronous Enabled:"); + seq_puts(m, " Synchronous Enabled:"); for (i = 0; i <= ADV_MAX_TID; i++) { if ((chip_scsi_id == i) || ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { @@ -3638,7 +3621,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) i, (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done); for (i = 0; i <= ADV_MAX_TID; i++) { @@ -3657,14 +3640,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) seq_printf(m, " %X:", i); if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */ - seq_printf(m, " Asynchronous"); + seq_puts(m, " Asynchronous"); } else { - seq_printf(m, " Transfer Period Factor: "); + seq_puts(m, " Transfer Period Factor: "); if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */ - seq_printf(m, "9 (80.0 Mhz),"); + seq_puts(m, "9 (80.0 Mhz),"); } else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */ - seq_printf(m, "10 (40.0 Mhz),"); + seq_puts(m, "10 (40.0 Mhz),"); } else { /* 20 Mhz or below. */ period = (((lramword >> 8) * 25) + 50) / 4; @@ -3684,16 +3667,15 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) } if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { - seq_printf(m, "*\n"); + seq_puts(m, "*\n"); renegotiate = 1; } else { - seq_printf(m, "\n"); + seq_putc(m, '\n'); } } if (renegotiate) { - seq_printf(m, - " * = Re-negotiation pending before next command.\n"); + seq_puts(m, " * = Re-negotiation pending before next command.\n"); } } diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 2b960b326daf..e31c460a1335 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -2490,299 +2490,296 @@ static void show_queues(struct Scsi_Host *shpnt) disp_enintr(shpnt); } -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m, ##args) - static void get_command(struct seq_file *m, Scsi_Cmnd * ptr) { int i; - SPRINTF("%p: target=%d; lun=%d; cmnd=( ", + seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ", ptr, ptr->device->id, (u8)ptr->device->lun); for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++) - SPRINTF("0x%02x ", ptr->cmnd[i]); + seq_printf(m, "0x%02x ", ptr->cmnd[i]); - SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |", + seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |", scsi_get_resid(ptr), ptr->SCp.this_residual, ptr->SCp.buffers_residual); if (ptr->SCp.phase & not_issued) - SPRINTF("not issued|"); + seq_puts(m, "not issued|"); if (ptr->SCp.phase & selecting) - SPRINTF("selecting|"); + seq_puts(m, "selecting|"); if (ptr->SCp.phase & disconnected) - SPRINTF("disconnected|"); + seq_puts(m, "disconnected|"); if (ptr->SCp.phase & aborted) - SPRINTF("aborted|"); + seq_puts(m, "aborted|"); if (ptr->SCp.phase & identified) - SPRINTF("identified|"); + seq_puts(m, "identified|"); if (ptr->SCp.phase & completed) - SPRINTF("completed|"); + seq_puts(m, "completed|"); if (ptr->SCp.phase & spiordy) - SPRINTF("spiordy|"); + seq_puts(m, "spiordy|"); if (ptr->SCp.phase & syncneg) - SPRINTF("syncneg|"); - SPRINTF("; next=0x%p\n", SCNEXT(ptr)); + seq_puts(m, "syncneg|"); + seq_printf(m, "; next=0x%p\n", SCNEXT(ptr)); } static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt) { int s; - SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name); + seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name); s = GETPORT(SCSISEQ); - SPRINTF("SCSISEQ( "); + seq_puts(m, "SCSISEQ( "); if (s & TEMODEO) - SPRINTF("TARGET MODE "); + seq_puts(m, "TARGET MODE "); if (s & ENSELO) - SPRINTF("SELO "); + seq_puts(m, "SELO "); if (s & ENSELI) - SPRINTF("SELI "); + seq_puts(m, "SELI "); if (s & ENRESELI) - SPRINTF("RESELI "); + seq_puts(m, "RESELI "); if (s & ENAUTOATNO) - SPRINTF("AUTOATNO "); + seq_puts(m, "AUTOATNO "); if (s & ENAUTOATNI) - SPRINTF("AUTOATNI "); + seq_puts(m, "AUTOATNI "); if (s & ENAUTOATNP) - SPRINTF("AUTOATNP "); + seq_puts(m, "AUTOATNP "); if (s & SCSIRSTO) - SPRINTF("SCSIRSTO "); - SPRINTF(");"); + seq_puts(m, "SCSIRSTO "); + seq_puts(m, ");"); - SPRINTF(" SCSISIG("); + seq_puts(m, " SCSISIG("); s = GETPORT(SCSISIG); switch (s & P_MASK) { case P_DATAO: - SPRINTF("DATA OUT"); + seq_puts(m, "DATA OUT"); break; case P_DATAI: - SPRINTF("DATA IN"); + seq_puts(m, "DATA IN"); break; case P_CMD: - SPRINTF("COMMAND"); + seq_puts(m, "COMMAND"); break; case P_STATUS: - SPRINTF("STATUS"); + seq_puts(m, "STATUS"); break; case P_MSGO: - SPRINTF("MESSAGE OUT"); + seq_puts(m, "MESSAGE OUT"); break; case P_MSGI: - SPRINTF("MESSAGE IN"); + seq_puts(m, "MESSAGE IN"); break; default: - SPRINTF("*invalid*"); + seq_puts(m, "*invalid*"); break; } - SPRINTF("); "); + seq_puts(m, "); "); - SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo"); + seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo"); - SPRINTF("SSTAT( "); + seq_puts(m, "SSTAT( "); s = GETPORT(SSTAT0); if (s & TARGET) - SPRINTF("TARGET "); + seq_puts(m, "TARGET "); if (s & SELDO) - SPRINTF("SELDO "); + seq_puts(m, "SELDO "); if (s & SELDI) - SPRINTF("SELDI "); + seq_puts(m, "SELDI "); if (s & SELINGO) - SPRINTF("SELINGO "); + seq_puts(m, "SELINGO "); if (s & SWRAP) - SPRINTF("SWRAP "); + seq_puts(m, "SWRAP "); if (s & SDONE) - SPRINTF("SDONE "); + seq_puts(m, "SDONE "); if (s & SPIORDY) - SPRINTF("SPIORDY "); + seq_puts(m, "SPIORDY "); if (s & DMADONE) - SPRINTF("DMADONE "); + seq_puts(m, "DMADONE "); s = GETPORT(SSTAT1); if (s & SELTO) - SPRINTF("SELTO "); + seq_puts(m, "SELTO "); if (s & ATNTARG) - SPRINTF("ATNTARG "); + seq_puts(m, "ATNTARG "); if (s & SCSIRSTI) - SPRINTF("SCSIRSTI "); + seq_puts(m, "SCSIRSTI "); if (s & PHASEMIS) - SPRINTF("PHASEMIS "); + seq_puts(m, "PHASEMIS "); if (s & BUSFREE) - SPRINTF("BUSFREE "); + seq_puts(m, "BUSFREE "); if (s & SCSIPERR) - SPRINTF("SCSIPERR "); + seq_puts(m, "SCSIPERR "); if (s & PHASECHG) - SPRINTF("PHASECHG "); + seq_puts(m, "PHASECHG "); if (s & REQINIT) - SPRINTF("REQINIT "); - SPRINTF("); "); + seq_puts(m, "REQINIT "); + seq_puts(m, "); "); - SPRINTF("SSTAT( "); + seq_puts(m, "SSTAT( "); s = GETPORT(SSTAT0) & GETPORT(SIMODE0); if (s & TARGET) - SPRINTF("TARGET "); + seq_puts(m, "TARGET "); if (s & SELDO) - SPRINTF("SELDO "); + seq_puts(m, "SELDO "); if (s & SELDI) - SPRINTF("SELDI "); + seq_puts(m, "SELDI "); if (s & SELINGO) - SPRINTF("SELINGO "); + seq_puts(m, "SELINGO "); if (s & SWRAP) - SPRINTF("SWRAP "); + seq_puts(m, "SWRAP "); if (s & SDONE) - SPRINTF("SDONE "); + seq_puts(m, "SDONE "); if (s & SPIORDY) - SPRINTF("SPIORDY "); + seq_puts(m, "SPIORDY "); if (s & DMADONE) - SPRINTF("DMADONE "); + seq_puts(m, "DMADONE "); s = GETPORT(SSTAT1) & GETPORT(SIMODE1); if (s & SELTO) - SPRINTF("SELTO "); + seq_puts(m, "SELTO "); if (s & ATNTARG) - SPRINTF("ATNTARG "); + seq_puts(m, "ATNTARG "); if (s & SCSIRSTI) - SPRINTF("SCSIRSTI "); + seq_puts(m, "SCSIRSTI "); if (s & PHASEMIS) - SPRINTF("PHASEMIS "); + seq_puts(m, "PHASEMIS "); if (s & BUSFREE) - SPRINTF("BUSFREE "); + seq_puts(m, "BUSFREE "); if (s & SCSIPERR) - SPRINTF("SCSIPERR "); + seq_puts(m, "SCSIPERR "); if (s & PHASECHG) - SPRINTF("PHASECHG "); + seq_puts(m, "PHASECHG "); if (s & REQINIT) - SPRINTF("REQINIT "); - SPRINTF("); "); + seq_puts(m, "REQINIT "); + seq_puts(m, "); "); - SPRINTF("SXFRCTL0( "); + seq_puts(m, "SXFRCTL0( "); s = GETPORT(SXFRCTL0); if (s & SCSIEN) - SPRINTF("SCSIEN "); + seq_puts(m, "SCSIEN "); if (s & DMAEN) - SPRINTF("DMAEN "); + seq_puts(m, "DMAEN "); if (s & CH1) - SPRINTF("CH1 "); + seq_puts(m, "CH1 "); if (s & CLRSTCNT) - SPRINTF("CLRSTCNT "); + seq_puts(m, "CLRSTCNT "); if (s & SPIOEN) - SPRINTF("SPIOEN "); + seq_puts(m, "SPIOEN "); if (s & CLRCH1) - SPRINTF("CLRCH1 "); - SPRINTF("); "); + seq_puts(m, "CLRCH1 "); + seq_puts(m, "); "); - SPRINTF("SIGNAL( "); + seq_puts(m, "SIGNAL( "); s = GETPORT(SCSISIG); if (s & SIG_ATNI) - SPRINTF("ATNI "); + seq_puts(m, "ATNI "); if (s & SIG_SELI) - SPRINTF("SELI "); + seq_puts(m, "SELI "); if (s & SIG_BSYI) - SPRINTF("BSYI "); + seq_puts(m, "BSYI "); if (s & SIG_REQI) - SPRINTF("REQI "); + seq_puts(m, "REQI "); if (s & SIG_ACKI) - SPRINTF("ACKI "); - SPRINTF("); "); + seq_puts(m, "ACKI "); + seq_puts(m, "); "); - SPRINTF("SELID(%02x), ", GETPORT(SELID)); + seq_printf(m, "SELID(%02x), ", GETPORT(SELID)); - SPRINTF("STCNT(%d), ", GETSTCNT()); + seq_printf(m, "STCNT(%d), ", GETSTCNT()); - SPRINTF("SSTAT2( "); + seq_puts(m, "SSTAT2( "); s = GETPORT(SSTAT2); if (s & SOFFSET) - SPRINTF("SOFFSET "); + seq_puts(m, "SOFFSET "); if (s & SEMPTY) - SPRINTF("SEMPTY "); + seq_puts(m, "SEMPTY "); if (s & SFULL) - SPRINTF("SFULL "); - SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT)); + seq_puts(m, "SFULL "); + seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT)); s = GETPORT(SSTAT3); - SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f); + seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f); - SPRINTF("SSTAT4( "); + seq_puts(m, "SSTAT4( "); s = GETPORT(SSTAT4); if (s & SYNCERR) - SPRINTF("SYNCERR "); + seq_puts(m, "SYNCERR "); if (s & FWERR) - SPRINTF("FWERR "); + seq_puts(m, "FWERR "); if (s & FRERR) - SPRINTF("FRERR "); - SPRINTF("); "); + seq_puts(m, "FRERR "); + seq_puts(m, "); "); - SPRINTF("DMACNTRL0( "); + seq_puts(m, "DMACNTRL0( "); s = GETPORT(DMACNTRL0); - SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT"); - SPRINTF("%s ", s & DMA ? "DMA" : "PIO"); - SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ"); + seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT"); + seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO"); + seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ"); if (s & ENDMA) - SPRINTF("ENDMA "); + seq_puts(m, "ENDMA "); if (s & INTEN) - SPRINTF("INTEN "); + seq_puts(m, "INTEN "); if (s & RSTFIFO) - SPRINTF("RSTFIFO "); + seq_puts(m, "RSTFIFO "); if (s & SWINT) - SPRINTF("SWINT "); - SPRINTF("); "); + seq_puts(m, "SWINT "); + seq_puts(m, "); "); - SPRINTF("DMASTAT( "); + seq_puts(m, "DMASTAT( "); s = GETPORT(DMASTAT); if (s & ATDONE) - SPRINTF("ATDONE "); + seq_puts(m, "ATDONE "); if (s & WORDRDY) - SPRINTF("WORDRDY "); + seq_puts(m, "WORDRDY "); if (s & DFIFOFULL) - SPRINTF("DFIFOFULL "); + seq_puts(m, "DFIFOFULL "); if (s & DFIFOEMP) - SPRINTF("DFIFOEMP "); - SPRINTF(")\n"); + seq_puts(m, "DFIFOEMP "); + seq_puts(m, ")\n"); - SPRINTF("enabled interrupts( "); + seq_puts(m, "enabled interrupts( "); s = GETPORT(SIMODE0); if (s & ENSELDO) - SPRINTF("ENSELDO "); + seq_puts(m, "ENSELDO "); if (s & ENSELDI) - SPRINTF("ENSELDI "); + seq_puts(m, "ENSELDI "); if (s & ENSELINGO) - SPRINTF("ENSELINGO "); + seq_puts(m, "ENSELINGO "); if (s & ENSWRAP) - SPRINTF("ENSWRAP "); + seq_puts(m, "ENSWRAP "); if (s & ENSDONE) - SPRINTF("ENSDONE "); + seq_puts(m, "ENSDONE "); if (s & ENSPIORDY) - SPRINTF("ENSPIORDY "); + seq_puts(m, "ENSPIORDY "); if (s & ENDMADONE) - SPRINTF("ENDMADONE "); + seq_puts(m, "ENDMADONE "); s = GETPORT(SIMODE1); if (s & ENSELTIMO) - SPRINTF("ENSELTIMO "); + seq_puts(m, "ENSELTIMO "); if (s & ENATNTARG) - SPRINTF("ENATNTARG "); + seq_puts(m, "ENATNTARG "); if (s & ENPHASEMIS) - SPRINTF("ENPHASEMIS "); + seq_puts(m, "ENPHASEMIS "); if (s & ENBUSFREE) - SPRINTF("ENBUSFREE "); + seq_puts(m, "ENBUSFREE "); if (s & ENSCSIPERR) - SPRINTF("ENSCSIPERR "); + seq_puts(m, "ENSCSIPERR "); if (s & ENPHASECHG) - SPRINTF("ENPHASECHG "); + seq_puts(m, "ENPHASECHG "); if (s & ENREQINIT) - SPRINTF("ENREQINIT "); - SPRINTF(")\n"); + seq_puts(m, "ENREQINIT "); + seq_puts(m, ")\n"); } static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int length) @@ -2825,56 +2822,56 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt) Scsi_Cmnd *ptr; unsigned long flags; - SPRINTF(AHA152X_REVID "\n"); + seq_puts(m, AHA152X_REVID "\n"); - SPRINTF("ioports 0x%04lx to 0x%04lx\n", + seq_printf(m, "ioports 0x%04lx to 0x%04lx\n", shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1); - SPRINTF("interrupt 0x%02x\n", shpnt->irq); - SPRINTF("disconnection/reconnection %s\n", + seq_printf(m, "interrupt 0x%02x\n", shpnt->irq); + seq_printf(m, "disconnection/reconnection %s\n", RECONNECT ? "enabled" : "disabled"); - SPRINTF("parity checking %s\n", + seq_printf(m, "parity checking %s\n", PARITY ? "enabled" : "disabled"); - SPRINTF("synchronous transfers %s\n", + seq_printf(m, "synchronous transfers %s\n", SYNCHRONOUS ? "enabled" : "disabled"); - SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands); + seq_printf(m, "%d commands currently queued\n", HOSTDATA(shpnt)->commands); if(SYNCHRONOUS) { - SPRINTF("synchronously operating targets (tick=50 ns):\n"); + seq_puts(m, "synchronously operating targets (tick=50 ns):\n"); for (i = 0; i < 8; i++) if (HOSTDATA(shpnt)->syncrate[i] & 0x7f) - SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n", + seq_printf(m, "target %d: period %dT/%dns; req/ack offset %d\n", i, (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2), (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50, HOSTDATA(shpnt)->syncrate[i] & 0x0f); } - SPRINTF("\nqueue status:\n"); + seq_puts(m, "\nqueue status:\n"); DO_LOCK(flags); if (ISSUE_SC) { - SPRINTF("not yet issued commands:\n"); + seq_puts(m, "not yet issued commands:\n"); for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr)) get_command(m, ptr); } else - SPRINTF("no not yet issued commands\n"); + seq_puts(m, "no not yet issued commands\n"); DO_UNLOCK(flags); if (CURRENT_SC) { - SPRINTF("current command:\n"); + seq_puts(m, "current command:\n"); get_command(m, CURRENT_SC); } else - SPRINTF("no current command\n"); + seq_puts(m, "no current command\n"); if (DISCONNECTED_SC) { - SPRINTF("disconnected commands:\n"); + seq_puts(m, "disconnected commands:\n"); for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr)) get_command(m, ptr); } else - SPRINTF("no disconnected commands\n"); + seq_puts(m, "no disconnected commands\n"); get_ports(m, shpnt); #if defined(AHA152X_STAT) - SPRINTF("statistics:\n" + seq_printf(m, "statistics:\n" "total commands: %d\n" "disconnections: %d\n" "busfree with check condition: %d\n" @@ -2894,7 +2891,7 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt) HOSTDATA(shpnt)->busfree_without_done_command, HOSTDATA(shpnt)->busfree_without_any_action); for(i=0; i<maxstate; i++) { - SPRINTF("%-10s %-12d %-12d %-12ld\n", + seq_printf(m, "%-10s %-12d %-12d %-12ld\n", states[i].name, HOSTDATA(shpnt)->count_trans[i], HOSTDATA(shpnt)->count[i], diff --git a/drivers/scsi/aic7xxx/aic79xx_proc.c b/drivers/scsi/aic7xxx/aic79xx_proc.c index 27dbfccea774..add2da581d66 100644 --- a/drivers/scsi/aic7xxx/aic79xx_proc.c +++ b/drivers/scsi/aic7xxx/aic79xx_proc.c @@ -97,7 +97,7 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo) u_int mb; if (tinfo->period == AHD_PERIOD_UNKNOWN) { - seq_printf(m, "Renegotiation Pending\n"); + seq_puts(m, "Renegotiation Pending\n"); return; } speed = 3300; @@ -119,40 +119,38 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo) printed_options = 0; seq_printf(m, " (%d.%03dMHz", freq / 1000, freq % 1000); if ((tinfo->ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { - seq_printf(m, " RDSTRM"); + seq_puts(m, " RDSTRM"); printed_options++; } if ((tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { - seq_printf(m, "%s", printed_options ? "|DT" : " DT"); + seq_puts(m, printed_options ? "|DT" : " DT"); printed_options++; } if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { - seq_printf(m, "%s", printed_options ? "|IU" : " IU"); + seq_puts(m, printed_options ? "|IU" : " IU"); printed_options++; } if ((tinfo->ppr_options & MSG_EXT_PPR_RTI) != 0) { - seq_printf(m, "%s", - printed_options ? "|RTI" : " RTI"); + seq_puts(m, printed_options ? "|RTI" : " RTI"); printed_options++; } if ((tinfo->ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { - seq_printf(m, "%s", - printed_options ? "|QAS" : " QAS"); + seq_puts(m, printed_options ? "|QAS" : " QAS"); printed_options++; } } if (tinfo->width > 0) { if (freq != 0) { - seq_printf(m, ", "); + seq_puts(m, ", "); } else { - seq_printf(m, " ("); + seq_puts(m, " ("); } seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width)); } else if (freq != 0) { - seq_printf(m, ")"); + seq_putc(m, ')'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); } static void @@ -167,15 +165,15 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct seq_file *m, tinfo = ahd_fetch_transinfo(ahd, channel, our_id, target_id, &tstate); seq_printf(m, "Target %d Negotiation Settings\n", target_id); - seq_printf(m, "\tUser: "); + seq_puts(m, "\tUser: "); ahd_format_transinfo(m, &tinfo->user); starget = ahd->platform_data->starget[target_id]; if (starget == NULL) return; - seq_printf(m, "\tGoal: "); + seq_puts(m, "\tGoal: "); ahd_format_transinfo(m, &tinfo->goal); - seq_printf(m, "\tCurr: "); + seq_puts(m, "\tCurr: "); ahd_format_transinfo(m, &tinfo->curr); for (lun = 0; lun < AHD_NUM_LUNS; lun++) { @@ -291,19 +289,19 @@ ahd_linux_show_info(struct seq_file *m, struct Scsi_Host *shost) max_targ = 16; if (ahd->seep_config == NULL) - seq_printf(m, "No Serial EEPROM\n"); + seq_puts(m, "No Serial EEPROM\n"); else { - seq_printf(m, "Serial EEPROM:\n"); + seq_puts(m, "Serial EEPROM:\n"); for (i = 0; i < sizeof(*ahd->seep_config)/2; i++) { if (((i % 8) == 0) && (i != 0)) { - seq_printf(m, "\n"); + seq_putc(m, '\n'); } seq_printf(m, "0x%.4x ", ((uint16_t*)ahd->seep_config)[i]); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); if ((ahd->features & AHD_WIDE) == 0) max_targ = 8; diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c index 64eec6c07a83..18459605d991 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_proc.c +++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c @@ -119,15 +119,15 @@ ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo) if (tinfo->width > 0) { if (freq != 0) { - seq_printf(m, ", "); + seq_puts(m, ", "); } else { - seq_printf(m, " ("); + seq_puts(m, " ("); } seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width)); } else if (freq != 0) { - seq_printf(m, ")"); + seq_putc(m, ')'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); } static void @@ -145,15 +145,15 @@ ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m, if ((ahc->features & AHC_TWIN) != 0) seq_printf(m, "Channel %c ", channel); seq_printf(m, "Target %d Negotiation Settings\n", target_id); - seq_printf(m, "\tUser: "); + seq_puts(m, "\tUser: "); ahc_format_transinfo(m, &tinfo->user); starget = ahc->platform_data->starget[target_offset]; if (!starget) return; - seq_printf(m, "\tGoal: "); + seq_puts(m, "\tGoal: "); ahc_format_transinfo(m, &tinfo->goal); - seq_printf(m, "\tCurr: "); + seq_puts(m, "\tCurr: "); ahc_format_transinfo(m, &tinfo->curr); for (lun = 0; lun < AHC_NUM_LUNS; lun++) { @@ -303,19 +303,19 @@ ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost) if (ahc->seep_config == NULL) - seq_printf(m, "No Serial EEPROM\n"); + seq_puts(m, "No Serial EEPROM\n"); else { - seq_printf(m, "Serial EEPROM:\n"); + seq_puts(m, "Serial EEPROM:\n"); for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) { if (((i % 8) == 0) && (i != 0)) { - seq_printf(m, "\n"); + seq_putc(m, '\n'); } seq_printf(m, "0x%.4x ", ((uint16_t*)ahc->seep_config)[i]); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); } - seq_printf(m, "\n"); + seq_putc(m, '\n'); max_targ = 16; if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index e64c3af7c1a0..decdc71b6b86 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2990,7 +2990,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m) struct fas216_device *dev; struct scsi_device *scd; - seq_printf(m, "Device/Lun TaggedQ Parity Sync\n"); + seq_puts(m, "Device/Lun TaggedQ Parity Sync\n"); shost_for_each_device(scd, info->host) { dev = &info->device[scd->id]; @@ -3000,7 +3000,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m) scd->simple_tags ? "en" : "dis", scd->current_tag); else - seq_printf(m, "unsupported "); + seq_puts(m, "unsupported "); seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis"); @@ -3008,7 +3008,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m) seq_printf(m, "offset %d, %d ns\n", dev->sof, dev->period * 4); else - seq_printf(m, "async\n"); + seq_puts(m, "async\n"); } } diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 6daed6b386d4..a70255413e7f 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -711,12 +711,12 @@ static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m) unsigned char *command; seq_printf(m, "scsi%d: destination target %d, lun %llu\n", H_NO(cmd), cmd->device->id, cmd->device->lun); - seq_printf(m, " command = "); + seq_puts(m, " command = "); command = cmd->cmnd; seq_printf(m, "%2d (0x%02x)", command[0], command[0]); for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) seq_printf(m, " %02x", command[i]); - seq_printf(m, "\n"); + seq_putc(m, '\n'); } static int __maybe_unused NCR5380_show_info(struct seq_file *m, diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index a795d81ef875..0836433e3a2d 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -3101,9 +3101,8 @@ static const char *atp870u_info(struct Scsi_Host *notused) static int atp870u_show_info(struct seq_file *m, struct Scsi_Host *HBAptr) { - seq_printf(m, "ACARD AEC-671X Driver Version: 2.6+ac\n"); - seq_printf(m, "\n"); - seq_printf(m, "Adapter Configuration:\n"); + seq_puts(m, "ACARD AEC-671X Driver Version: 2.6+ac\n\n" + "Adapter Configuration:\n"); seq_printf(m, " Base IO: %#.4lx\n", HBAptr->io_port); seq_printf(m, " IRQ: %d\n", HBAptr->irq); return 0; diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index 6bac8a746ee2..0045742fab7d 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -194,16 +194,10 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len, retry: errno = 0; - if (debug) { - DPRINTK("command: "); - __scsi_print_command(cmd, cmd_len); - } - result = scsi_execute_req(ch->device, cmd, direction, buffer, buflength, &sshdr, timeout * HZ, MAX_RETRIES, NULL); - DPRINTK("result: 0x%x\n",result); if (driver_byte(result) & DRIVER_SENSE) { if (debug) scsi_print_sense_hdr(ch->device, ch->name, &sshdr); diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index e2068a2621c4..fa09d4be2b53 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -18,14 +18,10 @@ #include <scsi/scsi_eh.h> #include <scsi/scsi_dbg.h> - - /* Commands with service actions that change the command name */ #define THIRD_PARTY_COPY_OUT 0x83 #define THIRD_PARTY_COPY_IN 0x84 -#define VENDOR_SPECIFIC_CDB 0xc0 - struct sa_name_list { int opcode; const struct value_name_pair *arr; @@ -37,7 +33,6 @@ struct value_name_pair { const char * name; }; -#ifdef CONFIG_SCSI_CONSTANTS static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, @@ -261,28 +256,8 @@ static struct sa_name_list sa_names_arr[] = { {0, NULL, 0}, }; -#else /* ifndef CONFIG_SCSI_CONSTANTS */ -static const char *cdb_byte0_names[0]; - -static struct sa_name_list sa_names_arr[] = { - {VARIABLE_LENGTH_CMD, NULL, 0}, - {MAINTENANCE_IN, NULL, 0}, - {MAINTENANCE_OUT, NULL, 0}, - {PERSISTENT_RESERVE_IN, NULL, 0}, - {PERSISTENT_RESERVE_OUT, NULL, 0}, - {SERVICE_ACTION_IN_12, NULL, 0}, - {SERVICE_ACTION_OUT_12, NULL, 0}, - {SERVICE_ACTION_BIDIRECTIONAL, NULL, 0}, - {SERVICE_ACTION_IN_16, NULL, 0}, - {SERVICE_ACTION_OUT_16, NULL, 0}, - {THIRD_PARTY_COPY_IN, NULL, 0}, - {THIRD_PARTY_COPY_OUT, NULL, 0}, - {0, NULL, 0}, -}; -#endif /* CONFIG_SCSI_CONSTANTS */ - -static bool scsi_opcode_sa_name(int opcode, int service_action, - const char **cdb_name, const char **sa_name) +bool scsi_opcode_sa_name(int opcode, int service_action, + const char **cdb_name, const char **sa_name) { struct sa_name_list *sa_name_ptr; const struct value_name_pair *arr = NULL; @@ -315,76 +290,6 @@ static bool scsi_opcode_sa_name(int opcode, int service_action, return true; } -static void print_opcode_name(const unsigned char *cdbp, size_t cdb_len) -{ - int sa, cdb0; - const char *cdb_name = NULL, *sa_name = NULL; - - cdb0 = cdbp[0]; - if (cdb0 == VARIABLE_LENGTH_CMD) { - if (cdb_len < 10) { - printk("short variable length command, len=%zu", - cdb_len); - return; - } - sa = (cdbp[8] << 8) + cdbp[9]; - } else - sa = cdbp[1] & 0x1f; - - if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) { - if (cdb_name) - printk("%s", cdb_name); - else if (cdb0 >= VENDOR_SPECIFIC_CDB) - printk("cdb[0]=0x%x (vendor)", cdb0); - else if (cdb0 >= 0x60 && cdb0 < 0x7e) - printk("cdb[0]=0x%x (reserved)", cdb0); - else - printk("cdb[0]=0x%x", cdb0); - } else { - if (sa_name) - printk("%s", sa_name); - else if (cdb_name) - printk("%s, sa=0x%x", cdb_name, sa); - else - printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); - } -} - -void __scsi_print_command(const unsigned char *cdb, size_t cdb_len) -{ - int k, len; - - print_opcode_name(cdb, cdb_len); - len = scsi_command_size(cdb); - if (cdb_len < len) - len = cdb_len; - /* print out all bytes in cdb */ - for (k = 0; k < len; ++k) - printk(" %02x", cdb[k]); - printk("\n"); -} -EXPORT_SYMBOL(__scsi_print_command); - -void scsi_print_command(struct scsi_cmnd *cmd) -{ - int k; - - if (cmd->cmnd == NULL) - return; - - scmd_printk(KERN_INFO, cmd, "CDB: "); - print_opcode_name(cmd->cmnd, cmd->cmd_len); - - /* print out all bytes in cdb */ - printk(":"); - for (k = 0; k < cmd->cmd_len; ++k) - printk(" %02x", cmd->cmnd[k]); - printk("\n"); -} -EXPORT_SYMBOL(scsi_print_command); - -#ifdef CONFIG_SCSI_CONSTANTS - struct error_info { unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ const char * text; @@ -392,7 +297,7 @@ struct error_info { /* * The canonical list of T10 Additional Sense Codes is available at: - * http://www.t10.org/lists/asc-num.txt [most recent: 20130605] + * http://www.t10.org/lists/asc-num.txt [most recent: 20141221] */ static const struct error_info additional[] = @@ -421,6 +326,7 @@ static const struct error_info additional[] = {0x001E, "Conflicting SA creation request"}, {0x001F, "Logical unit transitioning to another power condition"}, {0x0020, "Extended copy information available"}, + {0x0021, "Atomic command aborted due to ACA"}, {0x0100, "No index/sector signal"}, @@ -446,6 +352,7 @@ static const struct error_info additional[] = {0x040C, "Logical unit not accessible, target port in unavailable " "state"}, {0x040D, "Logical unit not ready, structure check required"}, + {0x040E, "Logical unit not ready, security session in progress"}, {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, {0x0411, "Logical unit not ready, notify (enable spinup) required"}, {0x0412, "Logical unit not ready, offline"}, @@ -462,6 +369,11 @@ static const struct error_info additional[] = {0x041C, "Logical unit not ready, additional power use not yet " "granted"}, {0x041D, "Logical unit not ready, configuration in progress"}, + {0x041E, "Logical unit not ready, microcode activation required"}, + {0x041F, "Logical unit not ready, microcode download required"}, + {0x0420, "Logical unit not ready, logical unit reset required"}, + {0x0421, "Logical unit not ready, hard reset required"}, + {0x0422, "Logical unit not ready, power cycle required"}, {0x0500, "Logical unit does not respond to selection"}, @@ -480,6 +392,7 @@ static const struct error_info additional[] = {0x0902, "Focus servo failure"}, {0x0903, "Spindle servo failure"}, {0x0904, "Head select fault"}, + {0x0905, "Vibration induced tracking error"}, {0x0A00, "Error log overflow"}, @@ -510,6 +423,7 @@ static const struct error_info additional[] = {0x0C0D, "Write error - not enough unsolicited data"}, {0x0C0E, "Multiple write errors"}, {0x0C0F, "Defects in error window"}, + {0x0C10, "Incomplete multiple atomic write operations"}, {0x0D00, "Error detected by third party temporary initiator"}, {0x0D01, "Third party device failure"}, @@ -635,6 +549,10 @@ static const struct error_info additional[] = {0x2101, "Invalid element address"}, {0x2102, "Invalid address for write"}, {0x2103, "Invalid write crossing layer jump"}, + {0x2104, "Unaligned write command"}, + {0x2105, "Write boundary violation"}, + {0x2106, "Attempt to read invalid data"}, + {0x2107, "Read boundary violation"}, {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, @@ -691,6 +609,7 @@ static const struct error_info additional[] = {0x2705, "Permanent write protect"}, {0x2706, "Conditional write protect"}, {0x2707, "Space allocation failed write protect"}, + {0x2708, "Zone is read only"}, {0x2800, "Not ready to ready change, medium may have changed"}, {0x2801, "Import or export element accessed"}, @@ -743,10 +662,15 @@ static const struct error_info additional[] = {0x2C0A, "Partition or collection contains user objects"}, {0x2C0B, "Not reserved"}, {0x2C0C, "Orwrite generation does not match"}, + {0x2C0D, "Reset write pointer not allowed"}, + {0x2C0E, "Zone is offline"}, {0x2D00, "Overwrite error on update in place"}, {0x2E00, "Insufficient time for operation"}, + {0x2E01, "Command timeout before processing"}, + {0x2E02, "Command timeout during processing"}, + {0x2E03, "Command timeout during processing due to error recovery"}, {0x2F00, "Commands cleared by another initiator"}, {0x2F01, "Commands cleared by power loss notification"}, @@ -868,6 +792,7 @@ static const struct error_info additional[] = {0x3F13, "iSCSI IP address removed"}, {0x3F14, "iSCSI IP address changed"}, {0x3F15, "Inspect referrals sense descriptors"}, + {0x3F16, "Microcode has been changed without reset"}, /* * {0x40NN, "Ram failure"}, * {0x40NN, "Diagnostic failure on component nn"}, @@ -946,6 +871,11 @@ static const struct error_info additional[] = {0x5306, "Volume identifier missing"}, {0x5307, "Duplicate volume identifier"}, {0x5308, "Element status unknown"}, + {0x5309, "Data transfer device error - load failed"}, + {0x530a, "Data transfer device error - unload failed"}, + {0x530b, "Data transfer device error - unload missing"}, + {0x530c, "Data transfer device error - eject failed"}, + {0x530d, "Data transfer device error - library communication failed"}, {0x5400, "Scsi to host system interface failure"}, @@ -963,6 +893,7 @@ static const struct error_info additional[] = {0x550B, "Insufficient power for operation"}, {0x550C, "Insufficient resources to create rod"}, {0x550D, "Insufficient resources to create rod token"}, + {0x550E, "Insufficient zone resources"}, {0x5700, "Unable to recover table-of-contents"}, @@ -1247,15 +1178,12 @@ static const char * const snstext[] = { "Completed", /* F: command completed sense data reported, may occur for successful command */ }; -#endif /* Get sense key string or NULL if not available */ const char * scsi_sense_key_string(unsigned char key) { -#ifdef CONFIG_SCSI_CONSTANTS if (key <= 0xE) return snstext[key]; -#endif return NULL; } EXPORT_SYMBOL(scsi_sense_key_string); @@ -1267,7 +1195,6 @@ EXPORT_SYMBOL(scsi_sense_key_string); const char * scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt) { -#ifdef CONFIG_SCSI_CONSTANTS int i; unsigned short code = ((asc << 8) | ascq); @@ -1283,122 +1210,10 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt) return additional2[i].str; } } -#else - *fmt = NULL; -#endif return NULL; } EXPORT_SYMBOL(scsi_extd_sense_format); -void -scsi_show_extd_sense(const struct scsi_device *sdev, const char *name, - unsigned char asc, unsigned char ascq) -{ - const char *extd_sense_fmt = NULL; - const char *extd_sense_str = scsi_extd_sense_format(asc, ascq, - &extd_sense_fmt); - - if (extd_sense_str) { - if (extd_sense_fmt) - sdev_prefix_printk(KERN_INFO, sdev, name, - "Add. Sense: %s (%s%x)", - extd_sense_str, extd_sense_fmt, - ascq); - else - sdev_prefix_printk(KERN_INFO, sdev, name, - "Add. Sense: %s", extd_sense_str); - - } else { - sdev_prefix_printk(KERN_INFO, sdev, name, - "%sASC=0x%x %sASCQ=0x%x\n", - asc >= 0x80 ? "<<vendor>> " : "", asc, - ascq >= 0x80 ? "<<vendor>> " : "", ascq); - } -} -EXPORT_SYMBOL(scsi_show_extd_sense); - -void -scsi_show_sense_hdr(const struct scsi_device *sdev, const char *name, - const struct scsi_sense_hdr *sshdr) -{ - const char *sense_txt; - - sense_txt = scsi_sense_key_string(sshdr->sense_key); - if (sense_txt) - sdev_prefix_printk(KERN_INFO, sdev, name, - "Sense Key : %s [%s]%s\n", sense_txt, - scsi_sense_is_deferred(sshdr) ? - "deferred" : "current", - sshdr->response_code >= 0x72 ? - " [descriptor]" : ""); - else - sdev_prefix_printk(KERN_INFO, sdev, name, - "Sense Key : 0x%x [%s]%s", sshdr->sense_key, - scsi_sense_is_deferred(sshdr) ? - "deferred" : "current", - sshdr->response_code >= 0x72 ? - " [descriptor]" : ""); -} -EXPORT_SYMBOL(scsi_show_sense_hdr); - -/* - * Print normalized SCSI sense header with a prefix. - */ -void -scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name, - const struct scsi_sense_hdr *sshdr) -{ - scsi_show_sense_hdr(sdev, name, sshdr); - scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq); -} -EXPORT_SYMBOL(scsi_print_sense_hdr); - -static void -scsi_dump_sense_buffer(const unsigned char *sense_buffer, int sense_len) -{ - int k, num; - - num = (sense_len < 32) ? sense_len : 32; - printk("Unrecognized sense data (in hex):"); - for (k = 0; k < num; ++k) { - if (0 == (k % 16)) { - printk("\n"); - printk(KERN_INFO " "); - } - printk("%02x ", sense_buffer[k]); - } - printk("\n"); - return; -} - -/* Normalize and print sense buffer with name prefix */ -void __scsi_print_sense(const struct scsi_device *sdev, const char *name, - const unsigned char *sense_buffer, int sense_len) -{ - struct scsi_sense_hdr sshdr; - - if (!scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) { - scsi_dump_sense_buffer(sense_buffer, sense_len); - return; - } - scsi_show_sense_hdr(sdev, name, &sshdr); - scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq); -} -EXPORT_SYMBOL(__scsi_print_sense); - -/* Normalize and print sense buffer in SCSI command */ -void scsi_print_sense(const struct scsi_cmnd *cmd) -{ - struct gendisk *disk = cmd->request->rq_disk; - const char *disk_name = disk ? disk->disk_name : NULL; - - __scsi_print_sense(cmd->device, disk_name, cmd->sense_buffer, - SCSI_SENSE_BUFFERSIZE); -} -EXPORT_SYMBOL(scsi_print_sense); - -#ifdef CONFIG_SCSI_CONSTANTS - static const char * const hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", @@ -1410,17 +1225,13 @@ static const char * const driverbyte_table[]={ "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; -#endif - const char *scsi_hostbyte_string(int result) { const char *hb_string = NULL; -#ifdef CONFIG_SCSI_CONSTANTS int hb = host_byte(result); if (hb < ARRAY_SIZE(hostbyte_table)) hb_string = hostbyte_table[hb]; -#endif return hb_string; } EXPORT_SYMBOL(scsi_hostbyte_string); @@ -1428,17 +1239,14 @@ EXPORT_SYMBOL(scsi_hostbyte_string); const char *scsi_driverbyte_string(int result) { const char *db_string = NULL; -#ifdef CONFIG_SCSI_CONSTANTS int db = driver_byte(result); if (db < ARRAY_SIZE(driverbyte_table)) db_string = driverbyte_table[db]; -#endif return db_string; } EXPORT_SYMBOL(scsi_driverbyte_string); -#ifdef CONFIG_SCSI_CONSTANTS #define scsi_mlreturn_name(result) { result, #result } static const struct value_name_pair scsi_mlreturn_arr[] = { scsi_mlreturn_name(NEEDS_RETRY), @@ -1451,11 +1259,9 @@ static const struct value_name_pair scsi_mlreturn_arr[] = { scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED), scsi_mlreturn_name(FAST_IO_FAIL) }; -#endif const char *scsi_mlreturn_string(int result) { -#ifdef CONFIG_SCSI_CONSTANTS const struct value_name_pair *arr = scsi_mlreturn_arr; int k; @@ -1463,29 +1269,6 @@ const char *scsi_mlreturn_string(int result) if (result == arr->value) return arr->name; } -#endif return NULL; } EXPORT_SYMBOL(scsi_mlreturn_string); - -void scsi_print_result(struct scsi_cmnd *cmd, const char *msg, int disposition) -{ - const char *mlret_string = scsi_mlreturn_string(disposition); - const char *hb_string = scsi_hostbyte_string(cmd->result); - const char *db_string = scsi_driverbyte_string(cmd->result); - - if (hb_string || db_string) - scmd_printk(KERN_INFO, cmd, - "%s%s Result: hostbyte=%s driverbyte=%s", - msg ? msg : "", - mlret_string ? mlret_string : "UNKNOWN", - hb_string ? hb_string : "invalid", - db_string ? db_string : "invalid"); - else - scmd_printk(KERN_INFO, cmd, - "%s%s Result: hostbyte=0x%02x driverbyte=0x%02x", - msg ? msg : "", - mlret_string ? mlret_string : "UNKNOWN", - host_byte(cmd->result), driver_byte(cmd->result)); -} -EXPORT_SYMBOL(scsi_print_result); diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 0c6be0a17f53..5ee7f44cf869 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -4610,13 +4610,10 @@ static void adapter_uninit(struct AdapterCtlBlk *acb) } -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m,##args) - #undef YESNO #define YESNO(YN) \ - if (YN) SPRINTF(" Yes ");\ - else SPRINTF(" No ") + if (YN) seq_printf(m, " Yes ");\ + else seq_printf(m, " No ") static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host) { @@ -4626,47 +4623,45 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host) unsigned long flags; int dev; - SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n"); - SPRINTF(" Driver Version " DC395X_VERSION "\n"); + seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n" + " Driver Version " DC395X_VERSION "\n"); DC395x_LOCK_IO(acb->scsi_host, flags); - SPRINTF("SCSI Host Nr %i, ", host->host_no); - SPRINTF("DC395U/UW/F DC315/U %s\n", + seq_printf(m, "SCSI Host Nr %i, ", host->host_no); + seq_printf(m, "DC395U/UW/F DC315/U %s\n", (acb->config & HCC_WIDE_CARD) ? "Wide" : ""); - SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base); - SPRINTF("irq_level 0x%04x, ", acb->irq_level); - SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000); + seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base); + seq_printf(m, "irq_level 0x%04x, ", acb->irq_level); + seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000); - SPRINTF("MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun); - SPRINTF("AdapterID %i\n", host->this_id); + seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun); + seq_printf(m, "AdapterID %i\n", host->this_id); - SPRINTF("tag_max_num %i", acb->tag_max_num); - /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */ - SPRINTF(", FilterCfg 0x%02x", + seq_printf(m, "tag_max_num %i", acb->tag_max_num); + /*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */ + seq_printf(m, ", FilterCfg 0x%02x", DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1)); - SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time); - /*SPRINTF("\n"); */ + seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time); + /*seq_printf(m, "\n"); */ - SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list)); - SPRINTF - ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n", + seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list)); + seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n", acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2], acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5], acb->dcb_map[6], acb->dcb_map[7]); - SPRINTF - (" %02x %02x %02x %02x %02x %02x %02x %02x\n", + seq_printf(m, " %02x %02x %02x %02x %02x %02x %02x %02x\n", acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10], acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13], acb->dcb_map[14], acb->dcb_map[15]); - SPRINTF - ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n"); + seq_puts(m, + "Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n"); dev = 0; list_for_each_entry(dcb, &acb->dcb_list, list) { int nego_period; - SPRINTF("%02i %02i %02i ", dev, dcb->target_id, + seq_printf(m, "%02i %02i %02i ", dev, dcb->target_id, dcb->target_lun); YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK); YESNO(dcb->sync_offset); @@ -4676,53 +4671,53 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host) YESNO(dcb->sync_mode & EN_TAG_QUEUEING); nego_period = clock_period[dcb->sync_period & 0x07] << 2; if (dcb->sync_offset) - SPRINTF(" %03i ns ", nego_period); + seq_printf(m, " %03i ns ", nego_period); else - SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2)); + seq_printf(m, " (%03i ns)", (dcb->min_nego_period << 2)); if (dcb->sync_offset & 0x0f) { spd = 1000 / (nego_period); spd1 = 1000 % (nego_period); spd1 = (spd1 * 10 + nego_period / 2) / (nego_period); - SPRINTF(" %2i.%1i M %02i ", spd, spd1, + seq_printf(m, " %2i.%1i M %02i ", spd, spd1, (dcb->sync_offset & 0x0f)); } else - SPRINTF(" "); + seq_puts(m, " "); /* Add more info ... */ - SPRINTF(" %02i\n", dcb->max_command); + seq_printf(m, " %02i\n", dcb->max_command); dev++; } if (timer_pending(&acb->waiting_timer)) - SPRINTF("Waiting queue timer running\n"); + seq_puts(m, "Waiting queue timer running\n"); else - SPRINTF("\n"); + seq_putc(m, '\n'); list_for_each_entry(dcb, &acb->dcb_list, list) { struct ScsiReqBlk *srb; if (!list_empty(&dcb->srb_waiting_list)) - SPRINTF("DCB (%02i-%i): Waiting: %i:", + seq_printf(m, "DCB (%02i-%i): Waiting: %i:", dcb->target_id, dcb->target_lun, list_size(&dcb->srb_waiting_list)); list_for_each_entry(srb, &dcb->srb_waiting_list, list) - SPRINTF(" %p", srb->cmd); + seq_printf(m, " %p", srb->cmd); if (!list_empty(&dcb->srb_going_list)) - SPRINTF("\nDCB (%02i-%i): Going : %i:", + seq_printf(m, "\nDCB (%02i-%i): Going : %i:", dcb->target_id, dcb->target_lun, list_size(&dcb->srb_going_list)); list_for_each_entry(srb, &dcb->srb_going_list, list) - SPRINTF(" %p", srb->cmd); + seq_printf(m, " %p", srb->cmd); if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list)) - SPRINTF("\n"); + seq_putc(m, '\n'); } if (debug_enabled(DBG_1)) { - SPRINTF("DCB list for ACB %p:\n", acb); + seq_printf(m, "DCB list for ACB %p:\n", acb); list_for_each_entry(dcb, &acb->dcb_list, list) { - SPRINTF("%p -> ", dcb); + seq_printf(m, "%p -> ", dcb); } - SPRINTF("END\n"); + seq_puts(m, "END\n"); } DC395x_UNLOCK_IO(acb->scsi_host, flags); diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 0bf976936a10..2806cfbec2b9 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -568,7 +568,7 @@ static int adpt_show_info(struct seq_file *m, struct Scsi_Host *host) seq_printf(m, "\tpost fifo size = %d\n\treply fifo size = %d\n\tsg table size = %d\n\n", host->can_queue, (int) pHba->reply_fifo_size , host->sg_tablesize); - seq_printf(m, "Devices:\n"); + seq_puts(m, "Devices:\n"); for(chan = 0; chan < MAX_CHANNEL; chan++) { for(id = 0; id < MAX_ID; id++) { d = pHba->channel[chan].device[id]; diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c index 8319d2b417b8..ca8003f0d8a3 100644 --- a/drivers/scsi/eata_pio.c +++ b/drivers/scsi/eata_pio.c @@ -102,7 +102,7 @@ static int eata_pio_show_info(struct seq_file *m, struct Scsi_Host *shost) shost->host_no, SD(shost)->name); seq_printf(m, "Firmware revision: v%s\n", SD(shost)->revision); - seq_printf(m, "IO: PIO\n"); + seq_puts(m, "IO: PIO\n"); seq_printf(m, "Base IO : %#.4x\n", (u32) shost->base); seq_printf(m, "Host Bus: %s\n", (SD(shost)->bustype == 'P')?"PCI ": diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c index 7e1c21e6736b..31f8966b2e03 100644 --- a/drivers/scsi/esas2r/esas2r_main.c +++ b/drivers/scsi/esas2r/esas2r_main.c @@ -749,7 +749,7 @@ int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh) if (dev_count == 0) seq_puts(m, "none\n"); - seq_puts(m, "\n"); + seq_putc(m, '\n'); return 0; } diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index ce5bd52fe692..065b25df741b 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2396,8 +2396,6 @@ int scsi_esp_register(struct esp *esp, struct device *dev) if (!esp->num_tags) esp->num_tags = ESP_DEFAULT_TAGS; - else if (esp->num_tags >= ESP_MAX_TAG) - esp->num_tags = ESP_MAX_TAG - 1; esp->host->transportt = esp_transport_template; esp->host->max_lun = ESP_MAX_LUN; esp->host->cmd_per_lun = 2; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index 9fb632684863..e66e997992e3 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -173,7 +173,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) /* request is i.e. "cat /proc/scsi/gdth/0" */ /* format: %-15s\t%-10s\t%-15s\t%s */ /* driver parameters */ - seq_printf(m, "Driver Parameters:\n"); + seq_puts(m, "Driver Parameters:\n"); if (reserve_list[0] == 0xff) strcpy(hrec, "--"); else { @@ -192,7 +192,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) max_ids, hdr_channel); /* controller information */ - seq_printf(m,"\nDisk Array Controller Information:\n"); + seq_puts(m, "\nDisk Array Controller Information:\n"); seq_printf(m, " Number: \t%d \tName: \t%s\n", ha->hanum, ha->binfo.type_string); @@ -219,7 +219,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) #ifdef GDTH_DMA_STATISTICS /* controller statistics */ - seq_printf(m,"\nController Statistics:\n"); + seq_puts(m, "\nController Statistics:\n"); seq_printf(m, " 32-bit DMA buffer:\t%lu\t64-bit DMA buffer:\t%lu\n", ha->dma32_cnt, ha->dma64_cnt); @@ -227,7 +227,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) if (ha->more_proc) { /* more information: 2. about physical devices */ - seq_printf(m, "\nPhysical Devices:"); + seq_puts(m, "\nPhysical Devices:"); flag = FALSE; buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr); @@ -326,10 +326,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr); if (!flag) - seq_printf(m, "\n --\n"); + seq_puts(m, "\n --\n"); /* 3. about logical drives */ - seq_printf(m,"\nLogical Drives:"); + seq_puts(m, "\nLogical Drives:"); flag = FALSE; buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr); @@ -411,10 +411,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr); if (!flag) - seq_printf(m, "\n --\n"); + seq_puts(m, "\n --\n"); /* 4. about array drives */ - seq_printf(m,"\nArray Drives:"); + seq_puts(m, "\nArray Drives:"); flag = FALSE; buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr); @@ -471,10 +471,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr); if (!flag) - seq_printf(m, "\n --\n"); + seq_puts(m, "\n --\n"); /* 5. about host drives */ - seq_printf(m,"\nHost Drives:"); + seq_puts(m, "\nHost Drives:"); flag = FALSE; buf = gdth_ioctl_alloc(ha, sizeof(gdth_hget_str), FALSE, &paddr); @@ -527,11 +527,11 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) } if (!flag) - seq_printf(m, "\n --\n"); + seq_puts(m, "\n --\n"); } /* controller events */ - seq_printf(m,"\nController Events:\n"); + seq_puts(m, "\nController Events:\n"); for (id = -1;;) { id = gdth_read_event(ha, id, estr); diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 6bb4611b238a..95d581c45413 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -50,6 +50,7 @@ #include <linux/jiffies.h> #include <linux/percpu-defs.h> #include <linux/percpu.h> +#include <asm/unaligned.h> #include <asm/div64.h> #include "hpsa_cmd.h" #include "hpsa.h" @@ -59,8 +60,11 @@ #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" #define HPSA "hpsa" -/* How long to wait (in milliseconds) for board to go into simple mode */ -#define MAX_CONFIG_WAIT 30000 +/* How long to wait for CISS doorbell communication */ +#define CLEAR_EVENT_WAIT_INTERVAL 20 /* ms for each msleep() call */ +#define MODE_CHANGE_WAIT_INTERVAL 10 /* ms for each msleep() call */ +#define MAX_CLEAR_EVENT_WAIT 30000 /* times 20 ms = 600 s */ +#define MAX_MODE_CHANGE_WAIT 2000 /* times 10 ms = 20 s */ #define MAX_IOCTL_CONFIG_WAIT 1000 /*define how many times we will try a command because of bus resets */ @@ -164,24 +168,24 @@ static struct board_type products[] = { {0x1926103C, "Smart Array P731m", &SA5_access}, {0x1928103C, "Smart Array P230i", &SA5_access}, {0x1929103C, "Smart Array P530", &SA5_access}, - {0x21BD103C, "Smart Array", &SA5_access}, - {0x21BE103C, "Smart Array", &SA5_access}, - {0x21BF103C, "Smart Array", &SA5_access}, - {0x21C0103C, "Smart Array", &SA5_access}, - {0x21C1103C, "Smart Array", &SA5_access}, - {0x21C2103C, "Smart Array", &SA5_access}, - {0x21C3103C, "Smart Array", &SA5_access}, + {0x21BD103C, "Smart Array P244br", &SA5_access}, + {0x21BE103C, "Smart Array P741m", &SA5_access}, + {0x21BF103C, "Smart HBA H240ar", &SA5_access}, + {0x21C0103C, "Smart Array P440ar", &SA5_access}, + {0x21C1103C, "Smart Array P840ar", &SA5_access}, + {0x21C2103C, "Smart Array P440", &SA5_access}, + {0x21C3103C, "Smart Array P441", &SA5_access}, {0x21C4103C, "Smart Array", &SA5_access}, - {0x21C5103C, "Smart Array", &SA5_access}, - {0x21C6103C, "Smart Array", &SA5_access}, - {0x21C7103C, "Smart Array", &SA5_access}, - {0x21C8103C, "Smart Array", &SA5_access}, + {0x21C5103C, "Smart Array P841", &SA5_access}, + {0x21C6103C, "Smart HBA H244br", &SA5_access}, + {0x21C7103C, "Smart HBA H240", &SA5_access}, + {0x21C8103C, "Smart HBA H241", &SA5_access}, {0x21C9103C, "Smart Array", &SA5_access}, - {0x21CA103C, "Smart Array", &SA5_access}, - {0x21CB103C, "Smart Array", &SA5_access}, + {0x21CA103C, "Smart Array P246br", &SA5_access}, + {0x21CB103C, "Smart Array P840", &SA5_access}, {0x21CC103C, "Smart Array", &SA5_access}, {0x21CD103C, "Smart Array", &SA5_access}, - {0x21CE103C, "Smart Array", &SA5_access}, + {0x21CE103C, "Smart HBA", &SA5_access}, {0x00761590, "HP Storage P1224 Array Controller", &SA5_access}, {0x00871590, "HP Storage P1224e Array Controller", &SA5_access}, {0x007D1590, "HP Storage P1228 Array Controller", &SA5_access}, @@ -195,8 +199,6 @@ static int number_of_controllers; static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg); -static void lock_and_start_io(struct ctlr_info *h); -static void start_io(struct ctlr_info *h, unsigned long *flags); #ifdef CONFIG_COMPAT static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, @@ -204,18 +206,18 @@ static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, #endif static void cmd_free(struct ctlr_info *h, struct CommandList *c); -static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); static struct CommandList *cmd_alloc(struct ctlr_info *h); -static struct CommandList *cmd_special_alloc(struct ctlr_info *h); static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, void *buff, size_t size, u16 page_code, unsigned char *scsi3addr, int cmd_type); +static void hpsa_free_cmd_pool(struct ctlr_info *h); #define VPD_PAGE (1 << 8) static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd); static void hpsa_scan_start(struct Scsi_Host *); static int hpsa_scan_finished(struct Scsi_Host *sh, unsigned long elapsed_time); +static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth); static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd); @@ -229,7 +231,7 @@ static void check_ioctl_unit_attention(struct ctlr_info *h, struct CommandList *c); /* performant mode helper functions */ static void calc_bucket_map(int *bucket, int num_buckets, - int nsgs, int min_blocks, int *bucket_map); + int nsgs, int min_blocks, u32 *bucket_map); static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); static inline u32 next_command(struct ctlr_info *h, u8 q); static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, @@ -241,14 +243,15 @@ static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id); static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, int wait_for_ready); static inline void finish_cmd(struct CommandList *c); -static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h); +static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h); #define BOARD_NOT_READY 0 #define BOARD_READY 1 static void hpsa_drain_accel_commands(struct ctlr_info *h); static void hpsa_flush_cache(struct ctlr_info *h); static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, - u8 *scsi3addr); + u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk); +static void hpsa_command_resubmit_worker(struct work_struct *work); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -505,8 +508,8 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) return (scsi3addr[3] & 0xC0) == 0x40; } -static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", - "1(ADM)", "UNKNOWN" +static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6", + "1(+0)ADM", "UNKNOWN" }; #define HPSA_RAID_0 0 #define HPSA_RAID_4 1 @@ -671,7 +674,7 @@ static struct scsi_host_template hpsa_driver_template = { .queuecommand = hpsa_scsi_queue_command, .scan_start = hpsa_scan_start, .scan_finished = hpsa_scan_finished, - .change_queue_depth = scsi_change_queue_depth, + .change_queue_depth = hpsa_change_queue_depth, .this_id = -1, .use_clustering = ENABLE_CLUSTERING, .eh_abort_handler = hpsa_eh_abort_handler, @@ -688,13 +691,6 @@ static struct scsi_host_template hpsa_driver_template = { .no_write_same = 1, }; - -/* Enqueuing and dequeuing functions for cmdlists. */ -static inline void addQ(struct list_head *list, struct CommandList *c) -{ - list_add_tail(&c->list, list); -} - static inline u32 next_command(struct ctlr_info *h, u8 q) { u32 a; @@ -828,31 +824,21 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c) { - unsigned long flags; - + dial_down_lockup_detection_during_fw_flash(h, c); + atomic_inc(&h->commands_outstanding); switch (c->cmd_type) { case CMD_IOACCEL1: set_ioaccel1_performant_mode(h, c); + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); break; case CMD_IOACCEL2: set_ioaccel2_performant_mode(h, c); + writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); break; default: set_performant_mode(h, c); + h->access.submit_command(h, c); } - dial_down_lockup_detection_during_fw_flash(h, c); - spin_lock_irqsave(&h->lock, flags); - addQ(&h->reqQ, c); - h->Qdepth++; - start_io(h, &flags); - spin_unlock_irqrestore(&h->lock, flags); -} - -static inline void removeQ(struct CommandList *c) -{ - if (WARN_ON(list_empty(&c->list))) - return; - list_del_init(&c->list); } static inline int is_hba_lunid(unsigned char scsi3addr[]) @@ -919,7 +905,7 @@ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, /* If this device a non-zero lun of a multi-lun device * byte 4 of the 8-byte LUN addr will contain the logical - * unit no, zero otherise. + * unit no, zero otherwise. */ if (device->scsi3addr[4] == 0) { /* This is not a non-zero lun of a multi-lun device */ @@ -984,12 +970,24 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno, /* Raid level changed. */ h->dev[entry]->raid_level = new_entry->raid_level; - /* Raid offload parameters changed. */ + /* Raid offload parameters changed. Careful about the ordering. */ + if (new_entry->offload_config && new_entry->offload_enabled) { + /* + * if drive is newly offload_enabled, we want to copy the + * raid map data first. If previously offload_enabled and + * offload_config were set, raid map data had better be + * the same as it was before. if raid map data is changed + * then it had better be the case that + * h->dev[entry]->offload_enabled is currently 0. + */ + h->dev[entry]->raid_map = new_entry->raid_map; + h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; + wmb(); /* ensure raid map updated prior to ->offload_enabled */ + } h->dev[entry]->offload_config = new_entry->offload_config; - h->dev[entry]->offload_enabled = new_entry->offload_enabled; - h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle; h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror; - h->dev[entry]->raid_map = new_entry->raid_map; + h->dev[entry]->offload_enabled = new_entry->offload_enabled; + h->dev[entry]->queue_depth = new_entry->queue_depth; dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n", scsi_device_type(new_entry->devtype), hostno, new_entry->bus, @@ -1115,6 +1113,8 @@ static inline int device_updated(struct hpsa_scsi_dev_t *dev1, return 1; if (dev1->offload_enabled != dev2->offload_enabled) return 1; + if (dev1->queue_depth != dev2->queue_depth) + return 1; return 0; } @@ -1260,6 +1260,85 @@ static void hpsa_show_volume_status(struct ctlr_info *h, } } +/* + * Figure the list of physical drive pointers for a logical drive with + * raid offload configured. + */ +static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h, + struct hpsa_scsi_dev_t *dev[], int ndevices, + struct hpsa_scsi_dev_t *logical_drive) +{ + struct raid_map_data *map = &logical_drive->raid_map; + struct raid_map_disk_data *dd = &map->data[0]; + int i, j; + int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + + le16_to_cpu(map->metadata_disks_per_row); + int nraid_map_entries = le16_to_cpu(map->row_cnt) * + le16_to_cpu(map->layout_map_count) * + total_disks_per_row; + int nphys_disk = le16_to_cpu(map->layout_map_count) * + total_disks_per_row; + int qdepth; + + if (nraid_map_entries > RAID_MAP_MAX_ENTRIES) + nraid_map_entries = RAID_MAP_MAX_ENTRIES; + + qdepth = 0; + for (i = 0; i < nraid_map_entries; i++) { + logical_drive->phys_disk[i] = NULL; + if (!logical_drive->offload_config) + continue; + for (j = 0; j < ndevices; j++) { + if (dev[j]->devtype != TYPE_DISK) + continue; + if (is_logical_dev_addr_mode(dev[j]->scsi3addr)) + continue; + if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle) + continue; + + logical_drive->phys_disk[i] = dev[j]; + if (i < nphys_disk) + qdepth = min(h->nr_cmds, qdepth + + logical_drive->phys_disk[i]->queue_depth); + break; + } + + /* + * This can happen if a physical drive is removed and + * the logical drive is degraded. In that case, the RAID + * map data will refer to a physical disk which isn't actually + * present. And in that case offload_enabled should already + * be 0, but we'll turn it off here just in case + */ + if (!logical_drive->phys_disk[i]) { + logical_drive->offload_enabled = 0; + logical_drive->queue_depth = h->nr_cmds; + } + } + if (nraid_map_entries) + /* + * This is correct for reads, too high for full stripe writes, + * way too high for partial stripe writes + */ + logical_drive->queue_depth = qdepth; + else + logical_drive->queue_depth = h->nr_cmds; +} + +static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h, + struct hpsa_scsi_dev_t *dev[], int ndevices) +{ + int i; + + for (i = 0; i < ndevices; i++) { + if (dev[i]->devtype != TYPE_DISK) + continue; + if (!is_logical_dev_addr_mode(dev[i]->scsi3addr)) + continue; + hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]); + } +} + static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, struct hpsa_scsi_dev_t *sd[], int nsds) { @@ -1444,8 +1523,12 @@ static int hpsa_slave_alloc(struct scsi_device *sdev) spin_lock_irqsave(&h->devlock, flags); sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), sdev_id(sdev), sdev->lun); - if (sd != NULL) + if (sd != NULL) { sdev->hostdata = sd; + if (sd->queue_depth) + scsi_change_queue_depth(sdev, sd->queue_depth); + atomic_set(&sd->ioaccel_cmds_out, 0); + } spin_unlock_irqrestore(&h->devlock, flags); return 0; } @@ -1478,13 +1561,17 @@ static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h) h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds, GFP_KERNEL); - if (!h->cmd_sg_list) + if (!h->cmd_sg_list) { + dev_err(&h->pdev->dev, "Failed to allocate SG list\n"); return -ENOMEM; + } for (i = 0; i < h->nr_cmds; i++) { h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) * h->chainsize, GFP_KERNEL); - if (!h->cmd_sg_list[i]) + if (!h->cmd_sg_list[i]) { + dev_err(&h->pdev->dev, "Failed to allocate cmd SG\n"); goto clean; + } } return 0; @@ -1504,7 +1591,7 @@ static int hpsa_map_sg_chain_block(struct ctlr_info *h, chain_block = h->cmd_sg_list[c->cmdindex]; chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN); chain_len = sizeof(*chain_sg) * - (c->Header.SGTotal - h->max_cmd_sg_entries); + (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries); chain_sg->Len = cpu_to_le32(chain_len); temp64 = pci_map_single(h->pdev, chain_block, chain_len, PCI_DMA_TODEVICE); @@ -1635,7 +1722,6 @@ static void process_ioaccel2_completion(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev) { struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; - int raid_retry = 0; /* check for good status */ if (likely(c2->error_data.serv_response == 0 && @@ -1652,26 +1738,22 @@ static void process_ioaccel2_completion(struct ctlr_info *h, if (is_logical_dev_addr_mode(dev->scsi3addr) && c2->error_data.serv_response == IOACCEL2_SERV_RESPONSE_FAILURE) { - dev->offload_enabled = 0; - h->drv_req_rescan = 1; /* schedule controller for a rescan */ - cmd->result = DID_SOFT_ERROR << 16; - cmd_free(h, c); - cmd->scsi_done(cmd); - return; - } - raid_retry = handle_ioaccel_mode2_error(h, c, cmd, c2); - /* If error found, disable Smart Path, schedule a rescan, - * and force a retry on the standard path. - */ - if (raid_retry) { - dev_warn(&h->pdev->dev, "%s: Retrying on standard path.\n", - "HP SSD Smart Path"); - dev->offload_enabled = 0; /* Disable Smart Path */ - h->drv_req_rescan = 1; /* schedule controller rescan */ - cmd->result = DID_SOFT_ERROR << 16; + if (c2->error_data.status == + IOACCEL2_STATUS_SR_IOACCEL_DISABLED) + dev->offload_enabled = 0; + goto retry_cmd; } + + if (handle_ioaccel_mode2_error(h, c, cmd, c2)) + goto retry_cmd; + cmd_free(h, c); cmd->scsi_done(cmd); + return; + +retry_cmd: + INIT_WORK(&c->work, hpsa_command_resubmit_worker); + queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work); } static void complete_scsi_command(struct CommandList *cp) @@ -1687,18 +1769,21 @@ static void complete_scsi_command(struct CommandList *cp) unsigned long sense_data_size; ei = cp->err_info; - cmd = (struct scsi_cmnd *) cp->scsi_cmd; + cmd = cp->scsi_cmd; h = cp->h; dev = cmd->device->hostdata; scsi_dma_unmap(cmd); /* undo the DMA mappings */ if ((cp->cmd_type == CMD_SCSI) && - (cp->Header.SGTotal > h->max_cmd_sg_entries)) + (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries)) hpsa_unmap_sg_chain_block(h, cp); cmd->result = (DID_OK << 16); /* host byte */ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) + atomic_dec(&cp->phys_disk->ioaccel_cmds_out); + if (cp->cmd_type == CMD_IOACCEL2) return process_ioaccel2_completion(h, cp, cmd, dev); @@ -1706,6 +1791,8 @@ static void complete_scsi_command(struct CommandList *cp) scsi_set_resid(cmd, ei->ResidualCnt); if (ei->CommandStatus == 0) { + if (cp->cmd_type == CMD_IOACCEL1) + atomic_dec(&cp->phys_disk->ioaccel_cmds_out); cmd_free(h, cp); cmd->scsi_done(cmd); return; @@ -1726,8 +1813,10 @@ static void complete_scsi_command(struct CommandList *cp) */ if (cp->cmd_type == CMD_IOACCEL1) { struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex]; - cp->Header.SGList = cp->Header.SGTotal = scsi_sg_count(cmd); - cp->Request.CDBLen = c->io_flags & IOACCEL1_IOFLAGS_CDBLEN_MASK; + cp->Header.SGList = scsi_sg_count(cmd); + cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList); + cp->Request.CDBLen = le16_to_cpu(c->io_flags) & + IOACCEL1_IOFLAGS_CDBLEN_MASK; cp->Header.tag = c->tag; memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8); memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen); @@ -1739,9 +1828,9 @@ static void complete_scsi_command(struct CommandList *cp) if (is_logical_dev_addr_mode(dev->scsi3addr)) { if (ei->CommandStatus == CMD_IOACCEL_DISABLED) dev->offload_enabled = 0; - cmd->result = DID_SOFT_ERROR << 16; - cmd_free(h, cp); - cmd->scsi_done(cmd); + INIT_WORK(&cp->work, hpsa_command_resubmit_worker); + queue_work_on(raw_smp_processor_id(), + h->resubmit_wq, &cp->work); return; } } @@ -1798,9 +1887,8 @@ static void complete_scsi_command(struct CommandList *cp) case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ break; case CMD_DATA_OVERRUN: - dev_warn(&h->pdev->dev, "cp %p has" - " completed with data overrun " - "reported\n", cp); + dev_warn(&h->pdev->dev, + "CDB %16phN data overrun\n", cp->Request.CDB); break; case CMD_INVALID: { /* print_bytes(cp, sizeof(*cp), 1, 0); @@ -1816,34 +1904,38 @@ static void complete_scsi_command(struct CommandList *cp) break; case CMD_PROTOCOL_ERR: cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, "cp %p has " - "protocol error\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n", + cp->Request.CDB); break; case CMD_HARDWARE_ERR: cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n", + cp->Request.CDB); break; case CMD_CONNECTION_LOST: cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n", + cp->Request.CDB); break; case CMD_ABORTED: cmd->result = DID_ABORT << 16; - dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", - cp, ei->ScsiStatus); + dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n", + cp->Request.CDB, ei->ScsiStatus); break; case CMD_ABORT_FAILED: cmd->result = DID_ERROR << 16; - dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n", + cp->Request.CDB); break; case CMD_UNSOLICITED_ABORT: cmd->result = DID_SOFT_ERROR << 16; /* retry the command */ - dev_warn(&h->pdev->dev, "cp %p aborted due to an unsolicited " - "abort\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n", + cp->Request.CDB); break; case CMD_TIMEOUT: cmd->result = DID_TIME_OUT << 16; - dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); + dev_warn(&h->pdev->dev, "CDB %16phN timed out\n", + cp->Request.CDB); break; case CMD_UNABORTABLE: cmd->result = DID_ERROR << 16; @@ -2048,10 +2140,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, struct CommandList *c; struct ErrorInfo *ei; - c = cmd_special_alloc(h); + c = cmd_alloc(h); - if (c == NULL) { /* trouble... */ - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + if (c == NULL) { + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -ENOMEM; } @@ -2067,7 +2159,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, rc = -1; } out: - cmd_special_free(h, c); + cmd_free(h, c); return rc; } @@ -2079,10 +2171,9 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h, struct CommandList *c; struct ErrorInfo *ei; - c = cmd_special_alloc(h); - + c = cmd_alloc(h); if (c == NULL) { /* trouble... */ - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -ENOMEM; } @@ -2098,7 +2189,7 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h, rc = -1; } out: - cmd_special_free(h, c); + cmd_free(h, c); return rc; } @@ -2109,10 +2200,10 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, struct CommandList *c; struct ErrorInfo *ei; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { /* trouble... */ - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -ENOMEM; } @@ -2128,7 +2219,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, hpsa_scsi_interpret_error(h, c); rc = -1; } - cmd_special_free(h, c); + cmd_free(h, c); return rc; } @@ -2191,15 +2282,13 @@ static void hpsa_debug_map_buff(struct ctlr_info *h, int rc, le16_to_cpu(map_buff->row_cnt)); dev_info(&h->pdev->dev, "layout_map_count = %u\n", le16_to_cpu(map_buff->layout_map_count)); - dev_info(&h->pdev->dev, "flags = %u\n", + dev_info(&h->pdev->dev, "flags = 0x%x\n", le16_to_cpu(map_buff->flags)); - if (map_buff->flags & RAID_MAP_FLAG_ENCRYPT_ON) - dev_info(&h->pdev->dev, "encrypytion = ON\n"); - else - dev_info(&h->pdev->dev, "encrypytion = OFF\n"); + dev_info(&h->pdev->dev, "encrypytion = %s\n", + le16_to_cpu(map_buff->flags) & + RAID_MAP_FLAG_ENCRYPT_ON ? "ON" : "OFF"); dev_info(&h->pdev->dev, "dekindex = %u\n", le16_to_cpu(map_buff->dekindex)); - map_cnt = le16_to_cpu(map_buff->layout_map_count); for (map = 0; map < map_cnt; map++) { dev_info(&h->pdev->dev, "Map%u:\n", map); @@ -2238,26 +2327,26 @@ static int hpsa_get_raid_map(struct ctlr_info *h, struct CommandList *c; struct ErrorInfo *ei; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -ENOMEM; } if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map, sizeof(this_device->raid_map), 0, scsi3addr, TYPE_CMD)) { dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n"); - cmd_special_free(h, c); + cmd_free(h, c); return -ENOMEM; } hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(h, c); - cmd_special_free(h, c); + cmd_free(h, c); return -1; } - cmd_special_free(h, c); + cmd_free(h, c); /* @todo in the future, dynamically allocate RAID map memory */ if (le32_to_cpu(this_device->raid_map.structure_size) > @@ -2269,6 +2358,34 @@ static int hpsa_get_raid_map(struct ctlr_info *h, return rc; } +static int hpsa_bmic_id_physical_device(struct ctlr_info *h, + unsigned char scsi3addr[], u16 bmic_device_index, + struct bmic_identify_physical_device *buf, size_t bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_alloc(h); + rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize, + 0, RAID_CTLR_LUNID, TYPE_CMD); + if (rc) + goto out; + + c->Request.CDB[2] = bmic_device_index & 0xff; + c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; + + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(h, c); + rc = -1; + } +out: + cmd_free(h, c); + return rc; +} + static int hpsa_vpd_page_supported(struct ctlr_info *h, unsigned char scsi3addr[], u8 page) { @@ -2369,7 +2486,7 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, } static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, - struct ReportLUNdata *buf, int bufsize, + void *buf, int bufsize, int extended_response) { int rc = IO_OK; @@ -2377,9 +2494,9 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, unsigned char scsi3addr[8]; struct ErrorInfo *ei; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { /* trouble... */ - dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -1; } /* address the controller */ @@ -2398,24 +2515,26 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, hpsa_scsi_interpret_error(h, c); rc = -1; } else { - if (buf->extended_response_flag != extended_response) { + struct ReportLUNdata *rld = buf; + + if (rld->extended_response_flag != extended_response) { dev_err(&h->pdev->dev, "report luns requested format %u, got %u\n", extended_response, - buf->extended_response_flag); + rld->extended_response_flag); rc = -1; } } out: - cmd_special_free(h, c); + cmd_free(h, c); return rc; } static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, - struct ReportLUNdata *buf, - int bufsize, int extended_response) + struct ReportExtendedLUNdata *buf, int bufsize) { - return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); + return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, + HPSA_REPORT_PHYS_EXTENDED); } static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, @@ -2590,6 +2709,7 @@ static int hpsa_update_device_info(struct ctlr_info *h, this_device->offload_config = 0; this_device->offload_enabled = 0; this_device->volume_offline = 0; + this_device->queue_depth = h->nr_cmds; } if (is_OBDR_device) { @@ -2732,7 +2852,6 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, { struct ReportExtendedLUNdata *physicals = NULL; int responsesize = 24; /* size of physical extended response */ - int extended = 2; /* flag forces reporting 'other dev info'. */ int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize; u32 nphysicals = 0; /* number of reported physical devs */ int found = 0; /* found match (1) or not (0) */ @@ -2741,8 +2860,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, struct scsi_cmnd *scmd; /* scsi command within request being aborted */ struct hpsa_scsi_dev_t *d; /* device of request being aborted */ struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */ - u32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */ - u32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */ + __le32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */ + __le32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */ if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2) return 0; /* no match */ @@ -2761,8 +2880,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, return 0; /* no match */ it_nexus = cpu_to_le32(d->ioaccel_handle); - scsi_nexus = cpu_to_le32(c2a->scsi_nexus); - find = c2a->scsi_nexus; + scsi_nexus = c2a->scsi_nexus; + find = le32_to_cpu(c2a->scsi_nexus); if (h->raid_offload_debug > 0) dev_info(&h->pdev->dev, @@ -2779,8 +2898,7 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, physicals = kzalloc(reportsize, GFP_KERNEL); if (physicals == NULL) return 0; - if (hpsa_scsi_do_report_phys_luns(h, (struct ReportLUNdata *) physicals, - reportsize, extended)) { + if (hpsa_scsi_do_report_phys_luns(h, physicals, reportsize)) { dev_err(&h->pdev->dev, "Can't lookup %s device handle: report physical LUNs failed.\n", "HP SSD Smart Path"); @@ -2821,34 +2939,20 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, * Returns 0 on success, -1 otherwise. */ static int hpsa_gather_lun_info(struct ctlr_info *h, - int reportphyslunsize, int reportloglunsize, - struct ReportLUNdata *physdev, u32 *nphysicals, int *physical_mode, + struct ReportExtendedLUNdata *physdev, u32 *nphysicals, struct ReportLUNdata *logdev, u32 *nlogicals) { - int physical_entry_size = 8; - - *physical_mode = 0; - - /* For I/O accelerator mode we need to read physical device handles */ - if (h->transMethod & CFGTBL_Trans_io_accel1 || - h->transMethod & CFGTBL_Trans_io_accel2) { - *physical_mode = HPSA_REPORT_PHYS_EXTENDED; - physical_entry_size = 24; - } - if (hpsa_scsi_do_report_phys_luns(h, physdev, reportphyslunsize, - *physical_mode)) { + if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); return -1; } - *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / - physical_entry_size; + *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24; if (*nphysicals > HPSA_MAX_PHYS_LUN) { - dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." - " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, - *nphysicals - HPSA_MAX_PHYS_LUN); + dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n", + HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN); *nphysicals = HPSA_MAX_PHYS_LUN; } - if (hpsa_scsi_do_report_log_luns(h, logdev, reportloglunsize)) { + if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) { dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); return -1; } @@ -2921,6 +3025,33 @@ static int hpsa_hba_mode_enabled(struct ctlr_info *h) return hba_mode_enabled; } +/* get physical drive ioaccel handle and queue depth */ +static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h, + struct hpsa_scsi_dev_t *dev, + u8 *lunaddrbytes, + struct bmic_identify_physical_device *id_phys) +{ + int rc; + struct ext_report_lun_entry *rle = + (struct ext_report_lun_entry *) lunaddrbytes; + + dev->ioaccel_handle = rle->ioaccel_handle; + memset(id_phys, 0, sizeof(*id_phys)); + rc = hpsa_bmic_id_physical_device(h, lunaddrbytes, + GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys, + sizeof(*id_phys)); + if (!rc) + /* Reserve space for FW operations */ +#define DRIVE_CMDS_RESERVED_FOR_FW 2 +#define DRIVE_QUEUE_DEPTH 7 + dev->queue_depth = + le16_to_cpu(id_phys->current_queue_depth_limit) - + DRIVE_CMDS_RESERVED_FOR_FW; + else + dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */ + atomic_set(&dev->ioaccel_cmds_out, 0); +} + static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) { /* the idea here is we could get notified @@ -2935,9 +3066,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) */ struct ReportExtendedLUNdata *physdev_list = NULL; struct ReportLUNdata *logdev_list = NULL; + struct bmic_identify_physical_device *id_phys = NULL; u32 nphysicals = 0; u32 nlogicals = 0; - int physical_mode = 0; u32 ndev_allocated = 0; struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; int ncurrent = 0; @@ -2950,8 +3081,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL); logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); + id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); - if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) { + if (!currentsd || !physdev_list || !logdev_list || + !tmpdevice || !id_phys) { dev_err(&h->pdev->dev, "out of memory\n"); goto out; } @@ -2968,10 +3101,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) h->hba_mode_enabled = rescan_hba_mode; - if (hpsa_gather_lun_info(h, - sizeof(*physdev_list), sizeof(*logdev_list), - (struct ReportLUNdata *) physdev_list, &nphysicals, - &physical_mode, logdev_list, &nlogicals)) + if (hpsa_gather_lun_info(h, physdev_list, &nphysicals, + logdev_list, &nlogicals)) goto out; /* We might see up to the maximum number of logical and physical disks @@ -3068,10 +3199,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) ncurrent++; break; } - if (physical_mode == HPSA_REPORT_PHYS_EXTENDED) { - memcpy(&this_device->ioaccel_handle, - &lunaddrbytes[20], - sizeof(this_device->ioaccel_handle)); + if (h->transMethod & CFGTBL_Trans_io_accel1 || + h->transMethod & CFGTBL_Trans_io_accel2) { + hpsa_get_ioaccel_drive_info(h, this_device, + lunaddrbytes, id_phys); + atomic_set(&this_device->ioaccel_cmds_out, 0); ncurrent++; } break; @@ -3095,6 +3227,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) if (ncurrent >= HPSA_MAX_DEVICES) break; } + hpsa_update_log_drive_phys_drive_ptrs(h, currentsd, ncurrent); adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); out: kfree(tmpdevice); @@ -3103,9 +3236,22 @@ out: kfree(currentsd); kfree(physdev_list); kfree(logdev_list); + kfree(id_phys); } -/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci +static void hpsa_set_sg_descriptor(struct SGDescriptor *desc, + struct scatterlist *sg) +{ + u64 addr64 = (u64) sg_dma_address(sg); + unsigned int len = sg_dma_len(sg); + + desc->Addr = cpu_to_le64(addr64); + desc->Len = cpu_to_le32(len); + desc->Ext = 0; +} + +/* + * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci * dma mapping and fills in the scatter gather entries of the * hpsa command, cp. */ @@ -3113,9 +3259,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h, struct CommandList *cp, struct scsi_cmnd *cmd) { - unsigned int len; struct scatterlist *sg; - u64 addr64; int use_sg, i, sg_index, chained; struct SGDescriptor *curr_sg; @@ -3138,13 +3282,11 @@ static int hpsa_scatter_gather(struct ctlr_info *h, curr_sg = h->cmd_sg_list[cp->cmdindex]; sg_index = 0; } - addr64 = (u64) sg_dma_address(sg); - len = sg_dma_len(sg); - curr_sg->Addr = cpu_to_le64(addr64); - curr_sg->Len = cpu_to_le32(len); - curr_sg->Ext = cpu_to_le32(0); + hpsa_set_sg_descriptor(curr_sg, sg); curr_sg++; } + + /* Back the pointer up to the last entry and mark it as "last". */ (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST); if (use_sg + chained > h->maxSG) @@ -3163,7 +3305,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h, sglist_finished: cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */ - cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in this cmd list */ + cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */ return 0; } @@ -3217,7 +3359,7 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len) static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, - u8 *scsi3addr) + u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) { struct scsi_cmnd *cmd = c->scsi_cmd; struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; @@ -3230,13 +3372,17 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE; /* TODO: implement chaining support */ - if (scsi_sg_count(cmd) > h->ioaccel_maxsg) + if (scsi_sg_count(cmd) > h->ioaccel_maxsg) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return IO_ACCEL_INELIGIBLE; + } BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX); - if (fixup_ioaccel_cdb(cdb, &cdb_len)) + if (fixup_ioaccel_cdb(cdb, &cdb_len)) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return IO_ACCEL_INELIGIBLE; + } c->cmd_type = CMD_IOACCEL1; @@ -3246,8 +3392,10 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, BUG_ON(c->busaddr & 0x0000007F); use_sg = scsi_dma_map(cmd); - if (use_sg < 0) + if (use_sg < 0) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return use_sg; + } if (use_sg) { curr_sg = cp->SG; @@ -3284,11 +3432,11 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, c->Header.SGList = use_sg; /* Fill out the command structure to submit */ - cp->dev_handle = ioaccel_handle & 0xFFFF; - cp->transfer_len = total_len; - cp->io_flags = IOACCEL1_IOFLAGS_IO_REQ | - (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK); - cp->control = control; + cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF); + cp->transfer_len = cpu_to_le32(total_len); + cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ | + (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK)); + cp->control = cpu_to_le32(control); memcpy(cp->CDB, cdb, cdb_len); memcpy(cp->CISS_LUN, scsi3addr, 8); /* Tag was already set at init time. */ @@ -3306,8 +3454,10 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h, struct scsi_cmnd *cmd = c->scsi_cmd; struct hpsa_scsi_dev_t *dev = cmd->device->hostdata; + c->phys_disk = dev; + return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle, - cmd->cmnd, cmd->cmd_len, dev->scsi3addr); + cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev); } /* @@ -3321,10 +3471,8 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h, struct raid_map_data *map = &dev->raid_map; u64 first_block; - BUG_ON(!(dev->offload_config && dev->offload_enabled)); - /* Are we doing encryption on this device */ - if (!(map->flags & RAID_MAP_FLAG_ENCRYPT_ON)) + if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON)) return; /* Set the data encryption key index. */ cp->dekindex = map->dekindex; @@ -3340,101 +3488,38 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h, /* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */ case WRITE_6: case READ_6: - if (map->volume_blk_size == 512) { - cp->tweak_lower = - (((u32) cmd->cmnd[2]) << 8) | - cmd->cmnd[3]; - cp->tweak_upper = 0; - } else { - first_block = - (((u64) cmd->cmnd[2]) << 8) | - cmd->cmnd[3]; - first_block = (first_block * map->volume_blk_size)/512; - cp->tweak_lower = (u32)first_block; - cp->tweak_upper = (u32)(first_block >> 32); - } + first_block = get_unaligned_be16(&cmd->cmnd[2]); break; case WRITE_10: case READ_10: - if (map->volume_blk_size == 512) { - cp->tweak_lower = - (((u32) cmd->cmnd[2]) << 24) | - (((u32) cmd->cmnd[3]) << 16) | - (((u32) cmd->cmnd[4]) << 8) | - cmd->cmnd[5]; - cp->tweak_upper = 0; - } else { - first_block = - (((u64) cmd->cmnd[2]) << 24) | - (((u64) cmd->cmnd[3]) << 16) | - (((u64) cmd->cmnd[4]) << 8) | - cmd->cmnd[5]; - first_block = (first_block * map->volume_blk_size)/512; - cp->tweak_lower = (u32)first_block; - cp->tweak_upper = (u32)(first_block >> 32); - } - break; /* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */ case WRITE_12: case READ_12: - if (map->volume_blk_size == 512) { - cp->tweak_lower = - (((u32) cmd->cmnd[2]) << 24) | - (((u32) cmd->cmnd[3]) << 16) | - (((u32) cmd->cmnd[4]) << 8) | - cmd->cmnd[5]; - cp->tweak_upper = 0; - } else { - first_block = - (((u64) cmd->cmnd[2]) << 24) | - (((u64) cmd->cmnd[3]) << 16) | - (((u64) cmd->cmnd[4]) << 8) | - cmd->cmnd[5]; - first_block = (first_block * map->volume_blk_size)/512; - cp->tweak_lower = (u32)first_block; - cp->tweak_upper = (u32)(first_block >> 32); - } + first_block = get_unaligned_be32(&cmd->cmnd[2]); break; case WRITE_16: case READ_16: - if (map->volume_blk_size == 512) { - cp->tweak_lower = - (((u32) cmd->cmnd[6]) << 24) | - (((u32) cmd->cmnd[7]) << 16) | - (((u32) cmd->cmnd[8]) << 8) | - cmd->cmnd[9]; - cp->tweak_upper = - (((u32) cmd->cmnd[2]) << 24) | - (((u32) cmd->cmnd[3]) << 16) | - (((u32) cmd->cmnd[4]) << 8) | - cmd->cmnd[5]; - } else { - first_block = - (((u64) cmd->cmnd[2]) << 56) | - (((u64) cmd->cmnd[3]) << 48) | - (((u64) cmd->cmnd[4]) << 40) | - (((u64) cmd->cmnd[5]) << 32) | - (((u64) cmd->cmnd[6]) << 24) | - (((u64) cmd->cmnd[7]) << 16) | - (((u64) cmd->cmnd[8]) << 8) | - cmd->cmnd[9]; - first_block = (first_block * map->volume_blk_size)/512; - cp->tweak_lower = (u32)first_block; - cp->tweak_upper = (u32)(first_block >> 32); - } + first_block = get_unaligned_be64(&cmd->cmnd[2]); break; default: dev_err(&h->pdev->dev, - "ERROR: %s: IOACCEL request CDB size not supported for encryption\n", - __func__); + "ERROR: %s: size (0x%x) not supported for encryption\n", + __func__, cmd->cmnd[0]); BUG(); break; } + + if (le32_to_cpu(map->volume_blk_size) != 512) + first_block = first_block * + le32_to_cpu(map->volume_blk_size)/512; + + cp->tweak_lower = cpu_to_le32(first_block); + cp->tweak_upper = cpu_to_le32(first_block >> 32); } static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, - u8 *scsi3addr) + u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) { struct scsi_cmnd *cmd = c->scsi_cmd; struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; @@ -3445,11 +3530,16 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, u32 len; u32 total_len = 0; - if (scsi_sg_count(cmd) > h->ioaccel_maxsg) + if (scsi_sg_count(cmd) > h->ioaccel_maxsg) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return IO_ACCEL_INELIGIBLE; + } - if (fixup_ioaccel_cdb(cdb, &cdb_len)) + if (fixup_ioaccel_cdb(cdb, &cdb_len)) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return IO_ACCEL_INELIGIBLE; + } + c->cmd_type = CMD_IOACCEL2; /* Adjust the DMA address to point to the accelerated command buffer */ c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle + @@ -3460,8 +3550,10 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, cp->IU_type = IOACCEL2_IU_TYPE; use_sg = scsi_dma_map(cmd); - if (use_sg < 0) + if (use_sg < 0) { + atomic_dec(&phys_disk->ioaccel_cmds_out); return use_sg; + } if (use_sg) { BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES); @@ -3506,9 +3598,8 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, /* Set encryption parameters, if necessary */ set_encrypt_ioaccel2(h, c, cp); - cp->scsi_nexus = ioaccel_handle; - cp->Tag = (c->cmdindex << DIRECT_LOOKUP_SHIFT) | - DIRECT_LOOKUP_BIT; + cp->scsi_nexus = cpu_to_le32(ioaccel_handle); + cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT); memcpy(cp->cdb, cdb, sizeof(cp->cdb)); /* fill in sg elements */ @@ -3528,14 +3619,22 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, */ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, - u8 *scsi3addr) + u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk) { + /* Try to honor the device's queue depth */ + if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) > + phys_disk->queue_depth) { + atomic_dec(&phys_disk->ioaccel_cmds_out); + return IO_ACCEL_INELIGIBLE; + } if (h->transMethod & CFGTBL_Trans_io_accel1) return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle, - cdb, cdb_len, scsi3addr); + cdb, cdb_len, scsi3addr, + phys_disk); else return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle, - cdb, cdb_len, scsi3addr); + cdb, cdb_len, scsi3addr, + phys_disk); } static void raid_map_helper(struct raid_map_data *map, @@ -3543,21 +3642,22 @@ static void raid_map_helper(struct raid_map_data *map, { if (offload_to_mirror == 0) { /* use physical disk in the first mirrored group. */ - *map_index %= map->data_disks_per_row; + *map_index %= le16_to_cpu(map->data_disks_per_row); return; } do { /* determine mirror group that *map_index indicates */ - *current_group = *map_index / map->data_disks_per_row; + *current_group = *map_index / + le16_to_cpu(map->data_disks_per_row); if (offload_to_mirror == *current_group) continue; - if (*current_group < (map->layout_map_count - 1)) { + if (*current_group < le16_to_cpu(map->layout_map_count) - 1) { /* select map index from next group */ - *map_index += map->data_disks_per_row; + *map_index += le16_to_cpu(map->data_disks_per_row); (*current_group)++; } else { /* select map index from first group */ - *map_index %= map->data_disks_per_row; + *map_index %= le16_to_cpu(map->data_disks_per_row); *current_group = 0; } } while (offload_to_mirror != *current_group); @@ -3595,13 +3695,12 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, u32 disk_block_cnt; u8 cdb[16]; u8 cdb_len; + u16 strip_size; #if BITS_PER_LONG == 32 u64 tmpdiv; #endif int offload_to_mirror; - BUG_ON(!(dev->offload_config && dev->offload_enabled)); - /* check for valid opcode, get LBA and block count */ switch (cmd->cmnd[0]) { case WRITE_6: @@ -3668,11 +3767,14 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, return IO_ACCEL_INELIGIBLE; /* check for invalid block or wraparound */ - if (last_block >= map->volume_blk_cnt || last_block < first_block) + if (last_block >= le64_to_cpu(map->volume_blk_cnt) || + last_block < first_block) return IO_ACCEL_INELIGIBLE; /* calculate stripe information for the request */ - blocks_per_row = map->data_disks_per_row * map->strip_size; + blocks_per_row = le16_to_cpu(map->data_disks_per_row) * + le16_to_cpu(map->strip_size); + strip_size = le16_to_cpu(map->strip_size); #if BITS_PER_LONG == 32 tmpdiv = first_block; (void) do_div(tmpdiv, blocks_per_row); @@ -3683,18 +3785,18 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); tmpdiv = first_row_offset; - (void) do_div(tmpdiv, map->strip_size); + (void) do_div(tmpdiv, strip_size); first_column = tmpdiv; tmpdiv = last_row_offset; - (void) do_div(tmpdiv, map->strip_size); + (void) do_div(tmpdiv, strip_size); last_column = tmpdiv; #else first_row = first_block / blocks_per_row; last_row = last_block / blocks_per_row; first_row_offset = (u32) (first_block - (first_row * blocks_per_row)); last_row_offset = (u32) (last_block - (last_row * blocks_per_row)); - first_column = first_row_offset / map->strip_size; - last_column = last_row_offset / map->strip_size; + first_column = first_row_offset / strip_size; + last_column = last_row_offset / strip_size; #endif /* if this isn't a single row/column then give to the controller */ @@ -3702,10 +3804,10 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, return IO_ACCEL_INELIGIBLE; /* proceeding with driver mapping */ - total_disks_per_row = map->data_disks_per_row + - map->metadata_disks_per_row; + total_disks_per_row = le16_to_cpu(map->data_disks_per_row) + + le16_to_cpu(map->metadata_disks_per_row); map_row = ((u32)(first_row >> map->parity_rotation_shift)) % - map->row_cnt; + le16_to_cpu(map->row_cnt); map_index = (map_row * total_disks_per_row) + first_column; switch (dev->raid_level) { @@ -3716,23 +3818,24 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, * (2-drive R1 and R10 with even # of drives.) * Appropriate for SSDs, not optimal for HDDs */ - BUG_ON(map->layout_map_count != 2); + BUG_ON(le16_to_cpu(map->layout_map_count) != 2); if (dev->offload_to_mirror) - map_index += map->data_disks_per_row; + map_index += le16_to_cpu(map->data_disks_per_row); dev->offload_to_mirror = !dev->offload_to_mirror; break; case HPSA_RAID_ADM: /* Handles N-way mirrors (R1-ADM) * and R10 with # of drives divisible by 3.) */ - BUG_ON(map->layout_map_count != 3); + BUG_ON(le16_to_cpu(map->layout_map_count) != 3); offload_to_mirror = dev->offload_to_mirror; raid_map_helper(map, offload_to_mirror, &map_index, ¤t_group); /* set mirror group to use next time */ offload_to_mirror = - (offload_to_mirror >= map->layout_map_count - 1) + (offload_to_mirror >= + le16_to_cpu(map->layout_map_count) - 1) ? 0 : offload_to_mirror + 1; dev->offload_to_mirror = offload_to_mirror; /* Avoid direct use of dev->offload_to_mirror within this @@ -3742,14 +3845,16 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, break; case HPSA_RAID_5: case HPSA_RAID_6: - if (map->layout_map_count <= 1) + if (le16_to_cpu(map->layout_map_count) <= 1) break; /* Verify first and last block are in same RAID group */ r5or6_blocks_per_row = - map->strip_size * map->data_disks_per_row; + le16_to_cpu(map->strip_size) * + le16_to_cpu(map->data_disks_per_row); BUG_ON(r5or6_blocks_per_row == 0); - stripesize = r5or6_blocks_per_row * map->layout_map_count; + stripesize = r5or6_blocks_per_row * + le16_to_cpu(map->layout_map_count); #if BITS_PER_LONG == 32 tmpdiv = first_block; first_group = do_div(tmpdiv, stripesize); @@ -3812,28 +3917,35 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, r5or6_blocks_per_row); first_column = r5or6_first_column = - r5or6_first_row_offset / map->strip_size; + r5or6_first_row_offset / le16_to_cpu(map->strip_size); r5or6_last_column = - r5or6_last_row_offset / map->strip_size; + r5or6_last_row_offset / le16_to_cpu(map->strip_size); #endif if (r5or6_first_column != r5or6_last_column) return IO_ACCEL_INELIGIBLE; /* Request is eligible */ map_row = ((u32)(first_row >> map->parity_rotation_shift)) % - map->row_cnt; + le16_to_cpu(map->row_cnt); map_index = (first_group * - (map->row_cnt * total_disks_per_row)) + + (le16_to_cpu(map->row_cnt) * total_disks_per_row)) + (map_row * total_disks_per_row) + first_column; break; default: return IO_ACCEL_INELIGIBLE; } + if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES)) + return IO_ACCEL_INELIGIBLE; + + c->phys_disk = dev->phys_disk[map_index]; + disk_handle = dd[map_index].ioaccel_handle; - disk_block = map->disk_starting_blk + (first_row * map->strip_size) + - (first_row_offset - (first_column * map->strip_size)); + disk_block = le64_to_cpu(map->disk_starting_blk) + + first_row * le16_to_cpu(map->strip_size) + + (first_row_offset - first_column * + le16_to_cpu(map->strip_size)); disk_block_cnt = block_cnt; /* handle differing logical/physical block sizes */ @@ -3876,78 +3988,21 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, cdb_len = 10; } return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len, - dev->scsi3addr); + dev->scsi3addr, + dev->phys_disk[map_index]); } -/* - * Running in struct Scsi_Host->host_lock less mode using LLD internal - * struct ctlr_info *h->lock w/ spin_lock_irqsave() protection. - */ -static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) +/* Submit commands down the "normal" RAID stack path */ +static int hpsa_ciss_submit(struct ctlr_info *h, + struct CommandList *c, struct scsi_cmnd *cmd, + unsigned char scsi3addr[]) { - struct ctlr_info *h; - struct hpsa_scsi_dev_t *dev; - unsigned char scsi3addr[8]; - struct CommandList *c; - int rc = 0; - - /* Get the ptr to our adapter structure out of cmd->host. */ - h = sdev_to_hba(cmd->device); - dev = cmd->device->hostdata; - if (!dev) { - cmd->result = DID_NO_CONNECT << 16; - cmd->scsi_done(cmd); - return 0; - } - memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); - - if (unlikely(lockup_detected(h))) { - cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); - return 0; - } - c = cmd_alloc(h); - if (c == NULL) { /* trouble... */ - dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); - return SCSI_MLQUEUE_HOST_BUSY; - } - - /* Fill in the command list header */ - /* save c in case we have to abort it */ cmd->host_scribble = (unsigned char *) c; - c->cmd_type = CMD_SCSI; c->scsi_cmd = cmd; - - /* Call alternate submit routine for I/O accelerated commands. - * Retries always go down the normal I/O path. - */ - if (likely(cmd->retries == 0 && - cmd->request->cmd_type == REQ_TYPE_FS && - h->acciopath_status)) { - if (dev->offload_enabled) { - rc = hpsa_scsi_ioaccel_raid_map(h, c); - if (rc == 0) - return 0; /* Sent on ioaccel path */ - if (rc < 0) { /* scsi_dma_map failed. */ - cmd_free(h, c); - return SCSI_MLQUEUE_HOST_BUSY; - } - } else if (dev->ioaccel_handle) { - rc = hpsa_scsi_ioaccel_direct_map(h, c); - if (rc == 0) - return 0; /* Sent on direct map path */ - if (rc < 0) { /* scsi_dma_map failed. */ - cmd_free(h, c); - return SCSI_MLQUEUE_HOST_BUSY; - } - } - } - c->Header.ReplyQueue = 0; /* unused in simple mode */ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); - c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT) | - DIRECT_LOOKUP_BIT); + c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT)); /* Fill in the request block... */ @@ -4003,25 +4058,108 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) return 0; } -static int do_not_scan_if_controller_locked_up(struct ctlr_info *h) +static void hpsa_command_resubmit_worker(struct work_struct *work) { - unsigned long flags; + struct scsi_cmnd *cmd; + struct hpsa_scsi_dev_t *dev; + struct CommandList *c = + container_of(work, struct CommandList, work); + + cmd = c->scsi_cmd; + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + cmd->scsi_done(cmd); + return; + } + if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) { + /* + * If we get here, it means dma mapping failed. Try + * again via scsi mid layer, which will then get + * SCSI_MLQUEUE_HOST_BUSY. + */ + cmd->result = DID_IMM_RETRY << 16; + cmd->scsi_done(cmd); + } +} + +/* Running in struct Scsi_Host->host_lock less mode */ +static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) +{ + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + unsigned char scsi3addr[8]; + struct CommandList *c; + int rc = 0; + + /* Get the ptr to our adapter structure out of cmd->host. */ + h = sdev_to_hba(cmd->device); + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + cmd->scsi_done(cmd); + return 0; + } + memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); + + if (unlikely(lockup_detected(h))) { + cmd->result = DID_ERROR << 16; + cmd->scsi_done(cmd); + return 0; + } + c = cmd_alloc(h); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); + return SCSI_MLQUEUE_HOST_BUSY; + } + if (unlikely(lockup_detected(h))) { + cmd->result = DID_ERROR << 16; + cmd_free(h, c); + cmd->scsi_done(cmd); + return 0; + } /* - * Don't let rescans be initiated on a controller known - * to be locked up. If the controller locks up *during* - * a rescan, that thread is probably hosed, but at least - * we can prevent new rescan threads from piling up on a - * locked up controller. + * Call alternate submit routine for I/O accelerated commands. + * Retries always go down the normal I/O path. */ - if (unlikely(lockup_detected(h))) { - spin_lock_irqsave(&h->scan_lock, flags); - h->scan_finished = 1; - wake_up_all(&h->scan_wait_queue); - spin_unlock_irqrestore(&h->scan_lock, flags); - return 1; + if (likely(cmd->retries == 0 && + cmd->request->cmd_type == REQ_TYPE_FS && + h->acciopath_status)) { + + cmd->host_scribble = (unsigned char *) c; + c->cmd_type = CMD_SCSI; + c->scsi_cmd = cmd; + + if (dev->offload_enabled) { + rc = hpsa_scsi_ioaccel_raid_map(h, c); + if (rc == 0) + return 0; /* Sent on ioaccel path */ + if (rc < 0) { /* scsi_dma_map failed. */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + } else if (dev->ioaccel_handle) { + rc = hpsa_scsi_ioaccel_direct_map(h, c); + if (rc == 0) + return 0; /* Sent on direct map path */ + if (rc < 0) { /* scsi_dma_map failed. */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + } } - return 0; + return hpsa_ciss_submit(h, c, cmd, scsi3addr); +} + +static void hpsa_scan_complete(struct ctlr_info *h) +{ + unsigned long flags; + + spin_lock_irqsave(&h->scan_lock, flags); + h->scan_finished = 1; + wake_up_all(&h->scan_wait_queue); + spin_unlock_irqrestore(&h->scan_lock, flags); } static void hpsa_scan_start(struct Scsi_Host *sh) @@ -4029,8 +4167,14 @@ static void hpsa_scan_start(struct Scsi_Host *sh) struct ctlr_info *h = shost_to_hba(sh); unsigned long flags; - if (do_not_scan_if_controller_locked_up(h)) - return; + /* + * Don't let rescans be initiated on a controller known to be locked + * up. If the controller locks up *during* a rescan, that thread is + * probably hosed, but at least we can prevent new rescan threads from + * piling up on a locked up controller. + */ + if (unlikely(lockup_detected(h))) + return hpsa_scan_complete(h); /* wait until any scan already in progress is finished. */ while (1) { @@ -4048,15 +4192,27 @@ static void hpsa_scan_start(struct Scsi_Host *sh) h->scan_finished = 0; /* mark scan as in progress */ spin_unlock_irqrestore(&h->scan_lock, flags); - if (do_not_scan_if_controller_locked_up(h)) - return; + if (unlikely(lockup_detected(h))) + return hpsa_scan_complete(h); hpsa_update_scsi_devices(h, h->scsi_host->host_no); - spin_lock_irqsave(&h->scan_lock, flags); - h->scan_finished = 1; /* mark scan as finished. */ - wake_up_all(&h->scan_wait_queue); - spin_unlock_irqrestore(&h->scan_lock, flags); + hpsa_scan_complete(h); +} + +static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata; + + if (!logical_drive) + return -ENODEV; + + if (qdepth < 1) + qdepth = 1; + else if (qdepth > logical_drive->queue_depth) + qdepth = logical_drive->queue_depth; + + return scsi_change_queue_depth(sdev, qdepth); } static int hpsa_scan_finished(struct Scsi_Host *sh, @@ -4096,11 +4252,11 @@ static int hpsa_register_scsi(struct ctlr_info *h) sh->max_cmd_len = MAX_COMMAND_SIZE; sh->max_lun = HPSA_MAX_LUN; sh->max_id = HPSA_MAX_LUN; - sh->can_queue = h->nr_cmds; - if (h->hba_mode_enabled) - sh->cmd_per_lun = 7; - else - sh->cmd_per_lun = h->nr_cmds; + sh->can_queue = h->nr_cmds - + HPSA_CMDS_RESERVED_FOR_ABORTS - + HPSA_CMDS_RESERVED_FOR_DRIVER - + HPSA_MAX_CONCURRENT_PASSTHRUS; + sh->cmd_per_lun = sh->can_queue; sh->sg_tablesize = h->maxsgentries; h->scsi_host = sh; sh->hostdata[0] = (unsigned long) h; @@ -4131,7 +4287,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, int waittime = 1; /* seconds */ struct CommandList *c; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (!c) { dev_warn(&h->pdev->dev, "out of memory in " "wait_for_device_to_become_ready.\n"); @@ -4177,7 +4333,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, else dev_warn(&h->pdev->dev, "device is ready.\n"); - cmd_special_free(h, c); + cmd_free(h, c); return rc; } @@ -4194,6 +4350,10 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) h = sdev_to_hba(scsicmd->device); if (h == NULL) /* paranoia */ return FAILED; + + if (lockup_detected(h)) + return FAILED; + dev = scsicmd->device->hostdata; if (!dev) { dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " @@ -4227,13 +4387,15 @@ static void swizzle_abort_tag(u8 *tag) } static void hpsa_get_tag(struct ctlr_info *h, - struct CommandList *c, u32 *taglower, u32 *tagupper) + struct CommandList *c, __le32 *taglower, __le32 *tagupper) { + u64 tag; if (c->cmd_type == CMD_IOACCEL1) { struct io_accel1_cmd *cm1 = (struct io_accel1_cmd *) &h->ioaccel_cmd_pool[c->cmdindex]; - *tagupper = (u32) (cm1->tag >> 32); - *taglower = (u32) (cm1->tag & 0x0ffffffffULL); + tag = le64_to_cpu(cm1->tag); + *tagupper = cpu_to_le32(tag >> 32); + *taglower = cpu_to_le32(tag); return; } if (c->cmd_type == CMD_IOACCEL2) { @@ -4244,8 +4406,9 @@ static void hpsa_get_tag(struct ctlr_info *h, *taglower = cm2->Tag; return; } - *tagupper = (u32) (c->Header.tag >> 32); - *taglower = (u32) (c->Header.tag & 0x0ffffffffULL); + tag = le64_to_cpu(c->Header.tag); + *tagupper = cpu_to_le32(tag >> 32); + *taglower = cpu_to_le32(tag); } static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, @@ -4254,11 +4417,11 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, int rc = IO_OK; struct CommandList *c; struct ErrorInfo *ei; - u32 tagupper, taglower; + __le32 tagupper, taglower; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { /* trouble... */ - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); return -ENOMEM; } @@ -4287,62 +4450,12 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, rc = -1; break; } - cmd_special_free(h, c); + cmd_free(h, c); dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n", __func__, tagupper, taglower); return rc; } -/* - * hpsa_find_cmd_in_queue - * - * Used to determine whether a command (find) is still present - * in queue_head. Optionally excludes the last element of queue_head. - * - * This is used to avoid unnecessary aborts. Commands in h->reqQ have - * not yet been submitted, and so can be aborted by the driver without - * sending an abort to the hardware. - * - * Returns pointer to command if found in queue, NULL otherwise. - */ -static struct CommandList *hpsa_find_cmd_in_queue(struct ctlr_info *h, - struct scsi_cmnd *find, struct list_head *queue_head) -{ - unsigned long flags; - struct CommandList *c = NULL; /* ptr into cmpQ */ - - if (!find) - return NULL; - spin_lock_irqsave(&h->lock, flags); - list_for_each_entry(c, queue_head, list) { - if (c->scsi_cmd == NULL) /* e.g.: passthru ioctl */ - continue; - if (c->scsi_cmd == find) { - spin_unlock_irqrestore(&h->lock, flags); - return c; - } - } - spin_unlock_irqrestore(&h->lock, flags); - return NULL; -} - -static struct CommandList *hpsa_find_cmd_in_queue_by_tag(struct ctlr_info *h, - u8 *tag, struct list_head *queue_head) -{ - unsigned long flags; - struct CommandList *c; - - spin_lock_irqsave(&h->lock, flags); - list_for_each_entry(c, queue_head, list) { - if (memcmp(&c->Header.tag, tag, 8) != 0) - continue; - spin_unlock_irqrestore(&h->lock, flags); - return c; - } - spin_unlock_irqrestore(&h->lock, flags); - return NULL; -} - /* ioaccel2 path firmware cannot handle abort task requests. * Change abort requests to physical target reset, and send to the * address of the physical disk used for the ioaccel 2 command. @@ -4360,7 +4473,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, unsigned char *psa = &phys_scsi3addr[0]; /* Get a pointer to the hpsa logical device. */ - scmd = (struct scsi_cmnd *) abort->scsi_cmd; + scmd = abort->scsi_cmd; dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata); if (dev == NULL) { dev_warn(&h->pdev->dev, @@ -4429,10 +4542,6 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, static int hpsa_send_abort_both_ways(struct ctlr_info *h, unsigned char *scsi3addr, struct CommandList *abort) { - u8 swizzled_tag[8]; - struct CommandList *c; - int rc = 0, rc2 = 0; - /* ioccelerator mode 2 commands should be aborted via the * accelerated path, since RAID path is unaware of these commands, * but underlying firmware can't handle abort TMF. @@ -4441,27 +4550,8 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h, if (abort->cmd_type == CMD_IOACCEL2) return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort); - /* we do not expect to find the swizzled tag in our queue, but - * check anyway just to be sure the assumptions which make this - * the case haven't become wrong. - */ - memcpy(swizzled_tag, &abort->Request.CDB[4], 8); - swizzle_abort_tag(swizzled_tag); - c = hpsa_find_cmd_in_queue_by_tag(h, swizzled_tag, &h->cmpQ); - if (c != NULL) { - dev_warn(&h->pdev->dev, "Unexpectedly found byte-swapped tag in completion queue.\n"); - return hpsa_send_abort(h, scsi3addr, abort, 0); - } - rc = hpsa_send_abort(h, scsi3addr, abort, 0); - - /* if the command is still in our queue, we can't conclude that it was - * aborted (it might have just completed normally) but in any case - * we don't need to try to abort it another way. - */ - c = hpsa_find_cmd_in_queue(h, abort->scsi_cmd, &h->cmpQ); - if (c) - rc2 = hpsa_send_abort(h, scsi3addr, abort, 1); - return rc && rc2; + return hpsa_send_abort(h, scsi3addr, abort, 0) && + hpsa_send_abort(h, scsi3addr, abort, 1); } /* Send an abort for the specified command. @@ -4475,11 +4565,11 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) struct ctlr_info *h; struct hpsa_scsi_dev_t *dev; struct CommandList *abort; /* pointer to command to be aborted */ - struct CommandList *found; struct scsi_cmnd *as; /* ptr to scsi cmd inside aborted command. */ char msg[256]; /* For debug messaging. */ int ml = 0; - u32 tagupper, taglower; + __le32 tagupper, taglower; + int refcount; /* Find the controller of the command to be aborted */ h = sdev_to_hba(sc->device); @@ -4487,6 +4577,9 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) "ABORT REQUEST FAILED, Controller lookup failed.\n")) return FAILED; + if (lockup_detected(h)) + return FAILED; + /* Check that controller supports some kind of task abort */ if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) && !(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags)) @@ -4508,41 +4601,23 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) /* Get SCSI command to be aborted */ abort = (struct CommandList *) sc->host_scribble; if (abort == NULL) { - dev_err(&h->pdev->dev, "%s FAILED, Command to abort is NULL.\n", - msg); - return FAILED; + /* This can happen if the command already completed. */ + return SUCCESS; + } + refcount = atomic_inc_return(&abort->refcount); + if (refcount == 1) { /* Command is done already. */ + cmd_free(h, abort); + return SUCCESS; } hpsa_get_tag(h, abort, &taglower, &tagupper); ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower); - as = (struct scsi_cmnd *) abort->scsi_cmd; + as = abort->scsi_cmd; if (as != NULL) ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ", as->cmnd[0], as->serial_number); dev_dbg(&h->pdev->dev, "%s\n", msg); dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n", h->scsi_host->host_no, dev->bus, dev->target, dev->lun); - - /* Search reqQ to See if command is queued but not submitted, - * if so, complete the command with aborted status and remove - * it from the reqQ. - */ - found = hpsa_find_cmd_in_queue(h, sc, &h->reqQ); - if (found) { - found->err_info->CommandStatus = CMD_ABORTED; - finish_cmd(found); - dev_info(&h->pdev->dev, "%s Request SUCCEEDED (driver queue).\n", - msg); - return SUCCESS; - } - - /* not in reqQ, if also not in cmpQ, must have already completed */ - found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ); - if (!found) { - dev_dbg(&h->pdev->dev, "%s Request SUCCEEDED (not known to driver).\n", - msg); - return SUCCESS; - } - /* * Command is in flight, or possibly already completed * by the firmware (but not to the scsi mid layer) but we can't @@ -4554,6 +4629,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n", h->scsi_host->host_no, dev->bus, dev->target, dev->lun); + cmd_free(h, abort); return FAILED; } dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg); @@ -4565,32 +4641,38 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) */ #define ABORT_COMPLETE_WAIT_SECS 30 for (i = 0; i < ABORT_COMPLETE_WAIT_SECS * 10; i++) { - found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ); - if (!found) + refcount = atomic_read(&abort->refcount); + if (refcount < 2) { + cmd_free(h, abort); return SUCCESS; - msleep(100); + } else { + msleep(100); + } } dev_warn(&h->pdev->dev, "%s FAILED. Aborted command has not completed after %d seconds.\n", msg, ABORT_COMPLETE_WAIT_SECS); + cmd_free(h, abort); return FAILED; } - /* * For operations that cannot sleep, a command block is allocated at init, * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track * which ones are free or in use. Lock must be held when calling this. * cmd_free() is the complement. */ + static struct CommandList *cmd_alloc(struct ctlr_info *h) { struct CommandList *c; int i; union u64bit temp64; dma_addr_t cmd_dma_handle, err_dma_handle; - int loopcount; + int refcount; + unsigned long offset; - /* There is some *extremely* small but non-zero chance that that + /* + * There is some *extremely* small but non-zero chance that that * multiple threads could get in here, and one thread could * be scanning through the list of bits looking for a free * one, but the free ones are always behind him, and other @@ -4601,24 +4683,30 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h) * infrequently as to be indistinguishable from never. */ - loopcount = 0; - do { - i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); - if (i == h->nr_cmds) - i = 0; - loopcount++; - } while (test_and_set_bit(i & (BITS_PER_LONG - 1), - h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0 && - loopcount < 10); - - /* Thread got starved? We do not expect this to ever happen. */ - if (loopcount >= 10) - return NULL; - - c = h->cmd_pool + i; - memset(c, 0, sizeof(*c)); - cmd_dma_handle = h->cmd_pool_dhandle - + i * sizeof(*c); + offset = h->last_allocation; /* benignly racy */ + for (;;) { + i = find_next_zero_bit(h->cmd_pool_bits, h->nr_cmds, offset); + if (unlikely(i == h->nr_cmds)) { + offset = 0; + continue; + } + c = h->cmd_pool + i; + refcount = atomic_inc_return(&c->refcount); + if (unlikely(refcount > 1)) { + cmd_free(h, c); /* already in use */ + offset = (i + 1) % h->nr_cmds; + continue; + } + set_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + break; /* it's ours now. */ + } + h->last_allocation = i; /* benignly racy */ + + /* Zero out all of commandlist except the last field, refcount */ + memset(c, 0, offsetof(struct CommandList, refcount)); + c->Header.tag = cpu_to_le64((u64) (i << DIRECT_LOOKUP_SHIFT)); + cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(*c); c->err_info = h->errinfo_pool + i; memset(c->err_info, 0, sizeof(*c->err_info)); err_dma_handle = h->errinfo_pool_dhandle @@ -4626,45 +4714,10 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h) c->cmdindex = i; - INIT_LIST_HEAD(&c->list); c->busaddr = (u32) cmd_dma_handle; temp64.val = (u64) err_dma_handle; - c->ErrDesc.Addr = cpu_to_le64(err_dma_handle); - c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info)); - - c->h = h; - return c; -} - -/* For operations that can wait for kmalloc to possibly sleep, - * this routine can be called. Lock need not be held to call - * cmd_special_alloc. cmd_special_free() is the complement. - */ -static struct CommandList *cmd_special_alloc(struct ctlr_info *h) -{ - struct CommandList *c; - dma_addr_t cmd_dma_handle, err_dma_handle; - - c = pci_zalloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); - if (c == NULL) - return NULL; - - c->cmd_type = CMD_SCSI; - c->cmdindex = -1; - - c->err_info = pci_zalloc_consistent(h->pdev, sizeof(*c->err_info), - &err_dma_handle); - - if (c->err_info == NULL) { - pci_free_consistent(h->pdev, - sizeof(*c), c, cmd_dma_handle); - return NULL; - } - - INIT_LIST_HEAD(&c->list); - c->busaddr = (u32) cmd_dma_handle; - c->ErrDesc.Addr = cpu_to_le64(err_dma_handle); - c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info)); + c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle); + c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info)); c->h = h; return c; @@ -4672,20 +4725,13 @@ static struct CommandList *cmd_special_alloc(struct ctlr_info *h) static void cmd_free(struct ctlr_info *h, struct CommandList *c) { - int i; - - i = c - h->cmd_pool; - clear_bit(i & (BITS_PER_LONG - 1), - h->cmd_pool_bits + (i / BITS_PER_LONG)); -} + if (atomic_dec_and_test(&c->refcount)) { + int i; -static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) -{ - pci_free_consistent(h->pdev, sizeof(*c->err_info), - c->err_info, - (dma_addr_t) le64_to_cpu(c->ErrDesc.Addr)); - pci_free_consistent(h->pdev, sizeof(*c), - c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK)); + i = c - h->cmd_pool; + clear_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + } } #ifdef CONFIG_COMPAT @@ -4866,7 +4912,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) memset(buff, 0, iocommand.buf_size); } } - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { rc = -ENOMEM; goto out_kfree; @@ -4883,8 +4929,6 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->Header.SGTotal = cpu_to_le16(0); } memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); - /* use the kernel address the cmd block for tag */ - c->Header.tag = c->busaddr; /* Fill in Request block */ memcpy(&c->Request, &iocommand.Request, @@ -4925,7 +4969,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) } } out: - cmd_special_free(h, c); + cmd_free(h, c); out_kfree: kfree(buff); return rc; @@ -4940,7 +4984,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) u64 temp64; BYTE sg_used = 0; int status = 0; - int i; u32 left; u32 sz; BYTE __user *data_ptr; @@ -5004,7 +5047,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) data_ptr += sz; sg_used++; } - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (c == NULL) { status = -ENOMEM; goto cleanup1; @@ -5014,7 +5057,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->Header.SGList = (u8) sg_used; c->Header.SGTotal = cpu_to_le16(sg_used); memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); - c->Header.tag = c->busaddr; memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); if (ioc->buf_size > 0) { int i; @@ -5047,6 +5089,8 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) goto cleanup0; } if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) { + int i; + /* Copy the data out of the buffer we created */ BYTE __user *ptr = ioc->buf; for (i = 0; i < sg_used; i++) { @@ -5059,9 +5103,11 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) } status = 0; cleanup0: - cmd_special_free(h, c); + cmd_free(h, c); cleanup1: if (buff) { + int i; + for (i = 0; i < sg_used; i++) kfree(buff[i]); kfree(buff); @@ -5079,35 +5125,6 @@ static void check_ioctl_unit_attention(struct ctlr_info *h, (void) check_for_unit_attention(h, c); } -static int increment_passthru_count(struct ctlr_info *h) -{ - unsigned long flags; - - spin_lock_irqsave(&h->passthru_count_lock, flags); - if (h->passthru_count >= HPSA_MAX_CONCURRENT_PASSTHRUS) { - spin_unlock_irqrestore(&h->passthru_count_lock, flags); - return -1; - } - h->passthru_count++; - spin_unlock_irqrestore(&h->passthru_count_lock, flags); - return 0; -} - -static void decrement_passthru_count(struct ctlr_info *h) -{ - unsigned long flags; - - spin_lock_irqsave(&h->passthru_count_lock, flags); - if (h->passthru_count <= 0) { - spin_unlock_irqrestore(&h->passthru_count_lock, flags); - /* not expecting to get here. */ - dev_warn(&h->pdev->dev, "Bug detected, passthru_count seems to be incorrect.\n"); - return; - } - h->passthru_count--; - spin_unlock_irqrestore(&h->passthru_count_lock, flags); -} - /* * ioctl */ @@ -5130,16 +5147,16 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg) case CCISS_GETDRIVVER: return hpsa_getdrivver_ioctl(h, argp); case CCISS_PASSTHRU: - if (increment_passthru_count(h)) + if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) return -EAGAIN; rc = hpsa_passthru_ioctl(h, argp); - decrement_passthru_count(h); + atomic_inc(&h->passthru_cmds_avail); return rc; case CCISS_BIG_PASSTHRU: - if (increment_passthru_count(h)) + if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0) return -EAGAIN; rc = hpsa_big_passthru_ioctl(h, argp); - decrement_passthru_count(h); + atomic_inc(&h->passthru_cmds_avail); return rc; default: return -ENOTTY; @@ -5173,7 +5190,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, { int pci_dir = XFER_NONE; struct CommandList *a; /* for commands to be aborted */ - u32 tupper, tlower; c->cmd_type = CMD_IOCTL_PEND; c->Header.ReplyQueue = 0; @@ -5184,7 +5200,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Header.SGList = 0; c->Header.SGTotal = cpu_to_le16(0); } - c->Header.tag = c->busaddr; memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); if (cmd_type == TYPE_CMD) { @@ -5256,6 +5271,16 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[7] = (size >> 16) & 0xFF; c->Request.CDB[8] = (size >> 8) & 0xFF; break; + case BMIC_IDENTIFY_PHYSICAL_DEVICE: + c->Request.CDBLen = 10; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_READ; + c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE; + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0XFF; + break; default: dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); BUG(); @@ -5281,10 +5306,9 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, break; case HPSA_ABORT_MSG: a = buff; /* point to command to be aborted */ - dev_dbg(&h->pdev->dev, "Abort Tag:0x%016llx using request Tag:0x%016llx", + dev_dbg(&h->pdev->dev, + "Abort Tag:0x%016llx request Tag:0x%016llx", a->Header.tag, c->Header.tag); - tlower = (u32) (a->Header.tag >> 32); - tupper = (u32) (a->Header.tag & 0x0ffffffffULL); c->Request.CDBLen = 16; c->Request.type_attr_dir = TYPE_ATTR_DIR(cmd_type, @@ -5295,14 +5319,8 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[2] = 0x00; /* reserved */ c->Request.CDB[3] = 0x00; /* reserved */ /* Tag to abort goes in CDB[4]-CDB[11] */ - c->Request.CDB[4] = tlower & 0xFF; - c->Request.CDB[5] = (tlower >> 8) & 0xFF; - c->Request.CDB[6] = (tlower >> 16) & 0xFF; - c->Request.CDB[7] = (tlower >> 24) & 0xFF; - c->Request.CDB[8] = tupper & 0xFF; - c->Request.CDB[9] = (tupper >> 8) & 0xFF; - c->Request.CDB[10] = (tupper >> 16) & 0xFF; - c->Request.CDB[11] = (tupper >> 24) & 0xFF; + memcpy(&c->Request.CDB[4], &a->Header.tag, + sizeof(a->Header.tag)); c->Request.CDB[12] = 0x00; /* reserved */ c->Request.CDB[13] = 0x00; /* reserved */ c->Request.CDB[14] = 0x00; /* reserved */ @@ -5349,47 +5367,6 @@ static void __iomem *remap_pci_mem(ulong base, ulong size) return page_remapped ? (page_remapped + page_offs) : NULL; } -/* Takes cmds off the submission queue and sends them to the hardware, - * then puts them on the queue of cmds waiting for completion. - * Assumes h->lock is held - */ -static void start_io(struct ctlr_info *h, unsigned long *flags) -{ - struct CommandList *c; - - while (!list_empty(&h->reqQ)) { - c = list_entry(h->reqQ.next, struct CommandList, list); - /* can't do anything if fifo is full */ - if ((h->access.fifo_full(h))) { - h->fifo_recently_full = 1; - dev_warn(&h->pdev->dev, "fifo full\n"); - break; - } - h->fifo_recently_full = 0; - - /* Get the first entry from the Request Q */ - removeQ(c); - h->Qdepth--; - - /* Put job onto the completed Q */ - addQ(&h->cmpQ, c); - atomic_inc(&h->commands_outstanding); - spin_unlock_irqrestore(&h->lock, *flags); - /* Tell the controller execute command */ - h->access.submit_command(h, c); - spin_lock_irqsave(&h->lock, *flags); - } -} - -static void lock_and_start_io(struct ctlr_info *h) -{ - unsigned long flags; - - spin_lock_irqsave(&h->lock, flags); - start_io(h, &flags); - spin_unlock_irqrestore(&h->lock, flags); -} - static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q) { return h->access.command_completed(h, q); @@ -5418,53 +5395,12 @@ static inline int bad_tag(struct ctlr_info *h, u32 tag_index, static inline void finish_cmd(struct CommandList *c) { - unsigned long flags; - int io_may_be_stalled = 0; - struct ctlr_info *h = c->h; - int count; - - spin_lock_irqsave(&h->lock, flags); - removeQ(c); - - /* - * Check for possibly stalled i/o. - * - * If a fifo_full condition is encountered, requests will back up - * in h->reqQ. This queue is only emptied out by start_io which is - * only called when a new i/o request comes in. If no i/o's are - * forthcoming, the i/o's in h->reqQ can get stuck. So we call - * start_io from here if we detect such a danger. - * - * Normally, we shouldn't hit this case, but pounding on the - * CCISS_PASSTHRU ioctl can provoke it. Only call start_io if - * commands_outstanding is low. We want to avoid calling - * start_io from in here as much as possible, and esp. don't - * want to get in a cycle where we call start_io every time - * through here. - */ - count = atomic_read(&h->commands_outstanding); - spin_unlock_irqrestore(&h->lock, flags); - if (unlikely(h->fifo_recently_full) && count < 5) - io_may_be_stalled = 1; - dial_up_lockup_detection_on_fw_flash_complete(c->h, c); if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI || c->cmd_type == CMD_IOACCEL2)) complete_scsi_command(c); else if (c->cmd_type == CMD_IOCTL_PEND) complete(c->waiting); - if (unlikely(io_may_be_stalled)) - lock_and_start_io(h); -} - -static inline u32 hpsa_tag_contains_index(u32 tag) -{ - return tag & DIRECT_LOOKUP_BIT; -} - -static inline u32 hpsa_tag_to_index(u32 tag) -{ - return tag >> DIRECT_LOOKUP_SHIFT; } @@ -5484,34 +5420,13 @@ static inline void process_indexed_cmd(struct ctlr_info *h, u32 tag_index; struct CommandList *c; - tag_index = hpsa_tag_to_index(raw_tag); + tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT; if (!bad_tag(h, tag_index, raw_tag)) { c = h->cmd_pool + tag_index; finish_cmd(c); } } -/* process completion of a non-indexed command */ -static inline void process_nonindexed_cmd(struct ctlr_info *h, - u32 raw_tag) -{ - u32 tag; - struct CommandList *c = NULL; - unsigned long flags; - - tag = hpsa_tag_discard_error_bits(h, raw_tag); - spin_lock_irqsave(&h->lock, flags); - list_for_each_entry(c, &h->cmpQ, list) { - if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) { - spin_unlock_irqrestore(&h->lock, flags); - finish_cmd(c); - return; - } - } - spin_unlock_irqrestore(&h->lock, flags); - bad_tag(h, h->nr_cmds + 1, raw_tag); -} - /* Some controllers, like p400, will give us one interrupt * after a soft reset, even if we turned interrupts off. * Only need to check for this in the hpsa_xxx_discard_completions @@ -5589,10 +5504,7 @@ static irqreturn_t do_hpsa_intr_intx(int irq, void *queue) while (interrupt_pending(h)) { raw_tag = get_next_completion(h, q); while (raw_tag != FIFO_EMPTY) { - if (likely(hpsa_tag_contains_index(raw_tag))) - process_indexed_cmd(h, raw_tag); - else - process_nonindexed_cmd(h, raw_tag); + process_indexed_cmd(h, raw_tag); raw_tag = next_command(h, q); } } @@ -5608,10 +5520,7 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *queue) h->last_intr_timestamp = get_jiffies_64(); raw_tag = get_next_completion(h, q); while (raw_tag != FIFO_EMPTY) { - if (likely(hpsa_tag_contains_index(raw_tag))) - process_indexed_cmd(h, raw_tag); - else - process_nonindexed_cmd(h, raw_tag); + process_indexed_cmd(h, raw_tag); raw_tag = next_command(h, q); } return IRQ_HANDLED; @@ -5633,7 +5542,8 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, static const size_t cmd_sz = sizeof(*cmd) + sizeof(cmd->ErrorDescriptor); dma_addr_t paddr64; - uint32_t paddr32, tag; + __le32 paddr32; + u32 tag; void __iomem *vaddr; int i, err; @@ -5648,7 +5558,7 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { iounmap(vaddr); - return -ENOMEM; + return err; } cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); @@ -5661,12 +5571,12 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, * although there's no guarantee, we assume that the address is at * least 4-byte aligned (most likely, it's page-aligned). */ - paddr32 = paddr64; + paddr32 = cpu_to_le32(paddr64); cmd->CommandHeader.ReplyQueue = 0; cmd->CommandHeader.SGList = 0; cmd->CommandHeader.SGTotal = cpu_to_le16(0); - cmd->CommandHeader.tag = paddr32; + cmd->CommandHeader.tag = cpu_to_le64(paddr64); memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); cmd->Request.CDBLen = 16; @@ -5677,14 +5587,14 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, cmd->Request.CDB[1] = type; memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ cmd->ErrorDescriptor.Addr = - cpu_to_le64((paddr32 + sizeof(*cmd))); + cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd))); cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo)); - writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET); for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); - if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr32) + if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64) break; msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); } @@ -5718,8 +5628,6 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode, static int hpsa_controller_hard_reset(struct pci_dev *pdev, void __iomem *vaddr, u32 use_doorbell) { - u16 pmcsr; - int pos; if (use_doorbell) { /* For everything after the P600, the PCI power state method @@ -5745,26 +5653,21 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev, * this causes a secondary PCI reset which will reset the * controller." */ - pos = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (pos == 0) { - dev_err(&pdev->dev, - "hpsa_reset_controller: " - "PCI PM not supported\n"); - return -ENODEV; - } + int rc = 0; + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + /* enter the D3hot power management state */ - pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= PCI_D3hot; - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + rc = pci_set_power_state(pdev, PCI_D3hot); + if (rc) + return rc; msleep(500); /* enter the D0 power management state */ - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= PCI_D0; - pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + rc = pci_set_power_state(pdev, PCI_D0); + if (rc) + return rc; /* * The P600 requires a small delay when changing states. @@ -5858,8 +5761,12 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) */ rc = hpsa_lookup_board_id(pdev, &board_id); - if (rc < 0 || !ctlr_is_resettable(board_id)) { - dev_warn(&pdev->dev, "Not resetting device.\n"); + if (rc < 0) { + dev_warn(&pdev->dev, "Board ID not found\n"); + return rc; + } + if (!ctlr_is_resettable(board_id)) { + dev_warn(&pdev->dev, "Controller not resettable\n"); return -ENODEV; } @@ -5892,7 +5799,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) } rc = write_driver_ver_to_cfgtable(cfgtable); if (rc) - goto unmap_vaddr; + goto unmap_cfgtable; /* If reset via doorbell register is supported, use that. * There are two such methods. Favor the newest method. @@ -5904,8 +5811,8 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) } else { use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; if (use_doorbell) { - dev_warn(&pdev->dev, "Soft reset not supported. " - "Firmware update is required.\n"); + dev_warn(&pdev->dev, + "Soft reset not supported. Firmware update is required.\n"); rc = -ENOTSUPP; /* try soft reset */ goto unmap_cfgtable; } @@ -5925,8 +5832,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY); if (rc) { dev_warn(&pdev->dev, - "failed waiting for board to become ready " - "after hard reset\n"); + "Failed waiting for board to become ready after hard reset\n"); goto unmap_cfgtable; } @@ -5977,7 +5883,7 @@ static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb) readl(&(tb->HostWrite.CoalIntDelay))); dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", readl(&(tb->HostWrite.CoalIntCount))); - dev_info(dev, " Max outstanding commands = 0x%d\n", + dev_info(dev, " Max outstanding commands = %d\n", readl(&(tb->CmdsOutMax))); dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); for (i = 0; i < 16; i++) @@ -6025,7 +5931,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) } /* If MSI/MSI-X is supported by the kernel we will try to enable it on - * controllers that are capable. If not, we use IO-APIC mode. + * controllers that are capable. If not, we use legacy INTx mode. */ static void hpsa_interrupt_mode(struct ctlr_info *h) @@ -6044,7 +5950,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h) (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11)) goto default_int_mode; if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) { - dev_info(&h->pdev->dev, "MSIX\n"); + dev_info(&h->pdev->dev, "MSI-X capable controller\n"); h->msix_vector = MAX_REPLY_QUEUES; if (h->msix_vector > num_online_cpus()) h->msix_vector = num_online_cpus(); @@ -6065,7 +5971,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h) } single_msi_mode: if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) { - dev_info(&h->pdev->dev, "MSI\n"); + dev_info(&h->pdev->dev, "MSI capable controller\n"); if (!pci_enable_msi(h->pdev)) h->msi_vector = 1; else @@ -6172,8 +6078,10 @@ static int hpsa_find_cfgtables(struct ctlr_info *h) return rc; h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev, cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable)); - if (!h->cfgtable) + if (!h->cfgtable) { + dev_err(&h->pdev->dev, "Failed mapping cfgtable\n"); return -ENOMEM; + } rc = write_driver_ver_to_cfgtable(h->cfgtable); if (rc) return rc; @@ -6204,6 +6112,15 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h) } } +/* If the controller reports that the total max sg entries is greater than 512, + * then we know that chained SG blocks work. (Original smart arrays did not + * support chained SG blocks and would return zero for max sg entries.) + */ +static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h) +{ + return h->maxsgentries > 512; +} + /* Interrogate the hardware for some limits: * max commands, max SG elements without chaining, and with chaining, * SG chain block size, etc. @@ -6211,21 +6128,23 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h) static void hpsa_find_board_params(struct ctlr_info *h) { hpsa_get_max_perf_mode_cmds(h); - h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */ + h->nr_cmds = h->max_commands; h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements)); h->fw_support = readl(&(h->cfgtable->misc_fw_support)); - /* - * Limit in-command s/g elements to 32 save dma'able memory. - * Howvever spec says if 0, use 31 - */ - h->max_cmd_sg_entries = 31; - if (h->maxsgentries > 512) { + if (hpsa_supports_chained_sg_blocks(h)) { + /* Limit in-command s/g elements to 32 save dma'able memory. */ h->max_cmd_sg_entries = 32; h->chainsize = h->maxsgentries - h->max_cmd_sg_entries; h->maxsgentries--; /* save one for chain pointer */ } else { - h->chainsize = 0; + /* + * Original smart arrays supported at most 31 s/g entries + * embedded inline in the command (trying to use more + * would lock up the controller) + */ + h->max_cmd_sg_entries = 31; h->maxsgentries = 31; /* default to traditional values */ + h->chainsize = 0; } /* Find out what task management functions are supported and cache */ @@ -6239,7 +6158,7 @@ static void hpsa_find_board_params(struct ctlr_info *h) static inline bool hpsa_CISS_signature_present(struct ctlr_info *h) { if (!check_signature(h->cfgtable->Signature, "CISS", 4)) { - dev_warn(&h->pdev->dev, "not a valid CISS config table\n"); + dev_err(&h->pdev->dev, "not a valid CISS config table\n"); return false; } return true; @@ -6272,24 +6191,27 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); } -static void hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h) +static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h) { int i; u32 doorbell_value; unsigned long flags; /* wait until the clear_event_notify bit 6 is cleared by controller. */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { + for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) { spin_lock_irqsave(&h->lock, flags); doorbell_value = readl(h->vaddr + SA5_DOORBELL); spin_unlock_irqrestore(&h->lock, flags); if (!(doorbell_value & DOORBELL_CLEAR_EVENTS)) - break; + goto done; /* delay and try again */ - msleep(20); + msleep(CLEAR_EVENT_WAIT_INTERVAL); } + return -ENODEV; +done: + return 0; } -static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h) +static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h) { int i; u32 doorbell_value; @@ -6299,17 +6221,21 @@ static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h) * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right * as we enter this code.) */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { + for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) { spin_lock_irqsave(&h->lock, flags); doorbell_value = readl(h->vaddr + SA5_DOORBELL); spin_unlock_irqrestore(&h->lock, flags); if (!(doorbell_value & CFGTBL_ChangeReq)) - break; + goto done; /* delay and try again */ - usleep_range(10000, 20000); + msleep(MODE_CHANGE_WAIT_INTERVAL); } + return -ENODEV; +done: + return 0; } +/* return -ENODEV or other reason on error, 0 on success */ static int hpsa_enter_simple_mode(struct ctlr_info *h) { u32 trans_support; @@ -6324,14 +6250,15 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h) writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi); writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - hpsa_wait_for_mode_change_ack(h); + if (hpsa_wait_for_mode_change_ack(h)) + goto error; print_cfg_table(&h->pdev->dev, h->cfgtable); if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) goto error; h->transMethod = CFGTBL_Trans_Simple; return 0; error: - dev_warn(&h->pdev->dev, "unable to get board into simple mode\n"); + dev_err(&h->pdev->dev, "failed to enter simple mode\n"); return -ENODEV; } @@ -6341,7 +6268,7 @@ static int hpsa_pci_init(struct ctlr_info *h) prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id); if (prod_index < 0) - return -ENODEV; + return prod_index; h->product_name = products[prod_index].product_name; h->access = *(products[prod_index].access); @@ -6422,6 +6349,7 @@ static void hpsa_hba_inquiry(struct ctlr_info *h) static int hpsa_init_reset_devices(struct pci_dev *pdev) { int rc, i; + void __iomem *vaddr; if (!reset_devices) return 0; @@ -6445,6 +6373,14 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) pci_set_master(pdev); + vaddr = pci_ioremap_bar(pdev, 0); + if (vaddr == NULL) { + rc = -ENOMEM; + goto out_disable; + } + writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET); + iounmap(vaddr); + /* Reset the controller with a PCI power-cycle or via doorbell */ rc = hpsa_kdump_hard_reset_controller(pdev); @@ -6453,14 +6389,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) * "performant mode". Or, it might be 640x, which can't reset * due to concerns about shared bbwc between 6402/6404 pair. */ - if (rc) { - if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */ - rc = -ENODEV; + if (rc) goto out_disable; - } /* Now try to get the controller to respond to a no-op */ - dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); + dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n"); for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { if (hpsa_noop(pdev) == 0) break; @@ -6490,9 +6423,12 @@ static int hpsa_allocate_cmd_pool(struct ctlr_info *h) || (h->cmd_pool == NULL) || (h->errinfo_pool == NULL)) { dev_err(&h->pdev->dev, "out of memory in %s", __func__); - return -ENOMEM; + goto clean_up; } return 0; +clean_up: + hpsa_free_cmd_pool(h); + return -ENOMEM; } static void hpsa_free_cmd_pool(struct ctlr_info *h) @@ -6519,16 +6455,38 @@ static void hpsa_free_cmd_pool(struct ctlr_info *h) static void hpsa_irq_affinity_hints(struct ctlr_info *h) { - int i, cpu, rc; + int i, cpu; cpu = cpumask_first(cpu_online_mask); for (i = 0; i < h->msix_vector; i++) { - rc = irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu)); + irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu)); cpu = cpumask_next(cpu, cpu_online_mask); } } -static int hpsa_request_irq(struct ctlr_info *h, +/* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */ +static void hpsa_free_irqs(struct ctlr_info *h) +{ + int i; + + if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) { + /* Single reply queue, only one irq to free */ + i = h->intr_mode; + irq_set_affinity_hint(h->intr[i], NULL); + free_irq(h->intr[i], &h->q[i]); + return; + } + + for (i = 0; i < h->msix_vector; i++) { + irq_set_affinity_hint(h->intr[i], NULL); + free_irq(h->intr[i], &h->q[i]); + } + for (; i < MAX_REPLY_QUEUES; i++) + h->q[i] = 0; +} + +/* returns 0 on success; cleans up and returns -Enn on error */ +static int hpsa_request_irqs(struct ctlr_info *h, irqreturn_t (*msixhandler)(int, void *), irqreturn_t (*intxhandler)(int, void *)) { @@ -6543,10 +6501,25 @@ static int hpsa_request_irq(struct ctlr_info *h, if (h->intr_mode == PERF_MODE_INT && h->msix_vector > 0) { /* If performant mode and MSI-X, use multiple reply queues */ - for (i = 0; i < h->msix_vector; i++) + for (i = 0; i < h->msix_vector; i++) { rc = request_irq(h->intr[i], msixhandler, 0, h->devname, &h->q[i]); + if (rc) { + int j; + + dev_err(&h->pdev->dev, + "failed to get irq %d for %s\n", + h->intr[i], h->devname); + for (j = 0; j < i; j++) { + free_irq(h->intr[j], &h->q[j]); + h->q[j] = 0; + } + for (; j < MAX_REPLY_QUEUES; j++) + h->q[j] = 0; + return rc; + } + } hpsa_irq_affinity_hints(h); } else { /* Use single reply pool */ @@ -6592,27 +6565,9 @@ static int hpsa_kdump_soft_reset(struct ctlr_info *h) return 0; } -static void free_irqs(struct ctlr_info *h) -{ - int i; - - if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) { - /* Single reply queue, only one irq to free */ - i = h->intr_mode; - irq_set_affinity_hint(h->intr[i], NULL); - free_irq(h->intr[i], &h->q[i]); - return; - } - - for (i = 0; i < h->msix_vector; i++) { - irq_set_affinity_hint(h->intr[i], NULL); - free_irq(h->intr[i], &h->q[i]); - } -} - static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h) { - free_irqs(h); + hpsa_free_irqs(h); #ifdef CONFIG_PCI_MSI if (h->msix_vector) { if (h->pdev->msix_enabled) @@ -6658,16 +6613,20 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) } /* Called when controller lockup detected. */ -static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list) +static void fail_all_outstanding_cmds(struct ctlr_info *h) { - struct CommandList *c = NULL; + int i, refcount; + struct CommandList *c; - assert_spin_locked(&h->lock); - /* Mark all outstanding commands as failed and complete them. */ - while (!list_empty(list)) { - c = list_entry(list->next, struct CommandList, list); - c->err_info->CommandStatus = CMD_HARDWARE_ERR; - finish_cmd(c); + flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */ + for (i = 0; i < h->nr_cmds; i++) { + c = h->cmd_pool + i; + refcount = atomic_inc_return(&c->refcount); + if (refcount > 1) { + c->err_info->CommandStatus = CMD_HARDWARE_ERR; + finish_cmd(c); + } + cmd_free(h, c); } } @@ -6704,10 +6663,7 @@ static void controller_lockup_detected(struct ctlr_info *h) dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n", lockup_detected); pci_disable_device(h->pdev); - spin_lock_irqsave(&h->lock, flags); - fail_all_cmds_on_list(h, &h->cmpQ); - fail_all_cmds_on_list(h, &h->reqQ); - spin_unlock_irqrestore(&h->lock, flags); + fail_all_outstanding_cmds(h); } static void detect_controller_lockup(struct ctlr_info *h) @@ -6750,8 +6706,8 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h) int i; char *event_type; - /* Clear the driver-requested rescan flag */ - h->drv_req_rescan = 0; + if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) + return; /* Ask the controller to clear the events we're handling. */ if ((h->transMethod & (CFGTBL_Trans_io_accel1 @@ -6798,9 +6754,6 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h) */ static int hpsa_ctlr_needs_rescan(struct ctlr_info *h) { - if (h->drv_req_rescan) - return 1; - if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) return 0; @@ -6834,34 +6787,60 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h) return 0; } - -static void hpsa_monitor_ctlr_worker(struct work_struct *work) +static void hpsa_rescan_ctlr_worker(struct work_struct *work) { unsigned long flags; struct ctlr_info *h = container_of(to_delayed_work(work), - struct ctlr_info, monitor_ctlr_work); - detect_controller_lockup(h); - if (lockup_detected(h)) + struct ctlr_info, rescan_ctlr_work); + + + if (h->remove_in_progress) return; if (hpsa_ctlr_needs_rescan(h) || hpsa_offline_devices_ready(h)) { scsi_host_get(h->scsi_host); - h->drv_req_rescan = 0; hpsa_ack_ctlr_events(h); hpsa_scan_start(h->scsi_host); scsi_host_put(h->scsi_host); } - spin_lock_irqsave(&h->lock, flags); - if (h->remove_in_progress) { - spin_unlock_irqrestore(&h->lock, flags); + if (!h->remove_in_progress) + queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, + h->heartbeat_sample_interval); + spin_unlock_irqrestore(&h->lock, flags); +} + +static void hpsa_monitor_ctlr_worker(struct work_struct *work) +{ + unsigned long flags; + struct ctlr_info *h = container_of(to_delayed_work(work), + struct ctlr_info, monitor_ctlr_work); + + detect_controller_lockup(h); + if (lockup_detected(h)) return; - } - schedule_delayed_work(&h->monitor_ctlr_work, + + spin_lock_irqsave(&h->lock, flags); + if (!h->remove_in_progress) + schedule_delayed_work(&h->monitor_ctlr_work, h->heartbeat_sample_interval); spin_unlock_irqrestore(&h->lock, flags); } +static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, + char *name) +{ + struct workqueue_struct *wq = NULL; + char wq_name[20]; + + snprintf(wq_name, sizeof(wq_name), "%s_%d_hpsa", name, h->ctlr); + wq = alloc_ordered_workqueue(wq_name, 0); + if (!wq) + dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name); + + return wq; +} + static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int dac, rc; @@ -6898,13 +6877,23 @@ reinit_after_soft_reset: h->pdev = pdev; h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; - INIT_LIST_HEAD(&h->cmpQ); - INIT_LIST_HEAD(&h->reqQ); INIT_LIST_HEAD(&h->offline_device_list); spin_lock_init(&h->lock); spin_lock_init(&h->offline_device_lock); spin_lock_init(&h->scan_lock); - spin_lock_init(&h->passthru_count_lock); + atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS); + + h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan"); + if (!h->rescan_ctlr_wq) { + rc = -ENOMEM; + goto clean1; + } + + h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit"); + if (!h->resubmit_wq) { + rc = -ENOMEM; + goto clean1; + } /* Allocate and clear per-cpu variable lockup_detected */ h->lockup_detected = alloc_percpu(u32); @@ -6939,13 +6928,14 @@ reinit_after_soft_reset: /* make sure the board interrupts are off */ h->access.set_intr_mask(h, HPSA_INTR_OFF); - if (hpsa_request_irq(h, do_hpsa_intr_msi, do_hpsa_intr_intx)) + if (hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx)) goto clean2; dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n", h->devname, pdev->device, h->intr[h->intr_mode], dac ? "" : " not"); - if (hpsa_allocate_cmd_pool(h)) - goto clean4; + rc = hpsa_allocate_cmd_pool(h); + if (rc) + goto clean2_and_free_irqs; if (hpsa_allocate_sg_chain_blocks(h)) goto clean4; init_waitqueue_head(&h->scan_wait_queue); @@ -6974,12 +6964,12 @@ reinit_after_soft_reset: spin_lock_irqsave(&h->lock, flags); h->access.set_intr_mask(h, HPSA_INTR_OFF); spin_unlock_irqrestore(&h->lock, flags); - free_irqs(h); - rc = hpsa_request_irq(h, hpsa_msix_discard_completions, + hpsa_free_irqs(h); + rc = hpsa_request_irqs(h, hpsa_msix_discard_completions, hpsa_intx_discard_completions); if (rc) { - dev_warn(&h->pdev->dev, "Failed to request_irq after " - "soft reset.\n"); + dev_warn(&h->pdev->dev, + "Failed to request_irq after soft reset.\n"); goto clean4; } @@ -7016,7 +7006,6 @@ reinit_after_soft_reset: /* Enable Accelerated IO path at driver layer */ h->acciopath_status = 1; - h->drv_req_rescan = 0; /* Turn the interrupts on so we can service requests */ h->access.set_intr_mask(h, HPSA_INTR_ON); @@ -7029,14 +7018,22 @@ reinit_after_soft_reset: INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker); schedule_delayed_work(&h->monitor_ctlr_work, h->heartbeat_sample_interval); + INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker); + queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work, + h->heartbeat_sample_interval); return 0; clean4: hpsa_free_sg_chain_blocks(h); hpsa_free_cmd_pool(h); - free_irqs(h); +clean2_and_free_irqs: + hpsa_free_irqs(h); clean2: clean1: + if (h->resubmit_wq) + destroy_workqueue(h->resubmit_wq); + if (h->rescan_ctlr_wq) + destroy_workqueue(h->rescan_ctlr_wq); if (h->lockup_detected) free_percpu(h->lockup_detected); kfree(h); @@ -7055,9 +7052,9 @@ static void hpsa_flush_cache(struct ctlr_info *h) if (!flush_buf) return; - c = cmd_special_alloc(h); + c = cmd_alloc(h); if (!c) { - dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n"); goto out_of_memory; } if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, @@ -7069,7 +7066,7 @@ static void hpsa_flush_cache(struct ctlr_info *h) out: dev_warn(&h->pdev->dev, "error flushing cache on controller\n"); - cmd_special_free(h, c); + cmd_free(h, c); out_of_memory: kfree(flush_buf); } @@ -7110,9 +7107,11 @@ static void hpsa_remove_one(struct pci_dev *pdev) /* Get rid of any controller monitoring work items */ spin_lock_irqsave(&h->lock, flags); h->remove_in_progress = 1; - cancel_delayed_work(&h->monitor_ctlr_work); spin_unlock_irqrestore(&h->lock, flags); - + cancel_delayed_work_sync(&h->monitor_ctlr_work); + cancel_delayed_work_sync(&h->rescan_ctlr_work); + destroy_workqueue(h->rescan_ctlr_wq); + destroy_workqueue(h->resubmit_wq); hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ hpsa_shutdown(pdev); iounmap(h->vaddr); @@ -7172,7 +7171,7 @@ static struct pci_driver hpsa_pci_driver = { * bits of the command address. */ static void calc_bucket_map(int bucket[], int num_buckets, - int nsgs, int min_blocks, int *bucket_map) + int nsgs, int min_blocks, u32 *bucket_map) { int i, j, b, size; @@ -7193,7 +7192,8 @@ static void calc_bucket_map(int bucket[], int num_buckets, } } -static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) +/* return -ENODEV or other reason on error, 0 on success */ +static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) { int i; unsigned long register_value; @@ -7285,12 +7285,16 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) } } writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - hpsa_wait_for_mode_change_ack(h); + if (hpsa_wait_for_mode_change_ack(h)) { + dev_err(&h->pdev->dev, + "performant mode problem - doorbell timeout\n"); + return -ENODEV; + } register_value = readl(&(h->cfgtable->TransportActive)); if (!(register_value & CFGTBL_Trans_Performant)) { - dev_warn(&h->pdev->dev, "unable to get board into" - " performant mode\n"); - return; + dev_err(&h->pdev->dev, + "performant mode problem - transport not active\n"); + return -ENODEV; } /* Change the access methods to the performant access methods */ h->access = access; @@ -7298,7 +7302,7 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) if (!((trans_support & CFGTBL_Trans_io_accel1) || (trans_support & CFGTBL_Trans_io_accel2))) - return; + return 0; if (trans_support & CFGTBL_Trans_io_accel1) { /* Set up I/O accelerator mode */ @@ -7328,12 +7332,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) (i * sizeof(struct ErrorInfo))); cp->err_info_len = sizeof(struct ErrorInfo); cp->sgl_offset = IOACCEL1_SGLOFFSET; - cp->host_context_flags = IOACCEL1_HCFLAGS_CISS_FORMAT; + cp->host_context_flags = + cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT); cp->timeout_sec = 0; cp->ReplyQueue = 0; cp->tag = - cpu_to_le64((i << DIRECT_LOOKUP_SHIFT) | - DIRECT_LOOKUP_BIT); + cpu_to_le64((i << DIRECT_LOOKUP_SHIFT)); cp->host_addr = cpu_to_le64(h->ioaccel_cmd_pool_dhandle + (i * sizeof(struct io_accel1_cmd))); @@ -7362,7 +7366,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) writel(bft2[i], &h->ioaccel2_bft2_regs[i]); } writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - hpsa_wait_for_mode_change_ack(h); + if (hpsa_wait_for_mode_change_ack(h)) { + dev_err(&h->pdev->dev, + "performant mode problem - enabling ioaccel mode\n"); + return -ENODEV; + } + return 0; } static int hpsa_alloc_ioaccel_cmd_and_bft(struct ctlr_info *h) @@ -7508,17 +7517,18 @@ static int is_accelerated_cmd(struct CommandList *c) static void hpsa_drain_accel_commands(struct ctlr_info *h) { struct CommandList *c = NULL; - unsigned long flags; - int accel_cmds_out; + int i, accel_cmds_out; + int refcount; - do { /* wait for all outstanding commands to drain out */ + do { /* wait for all outstanding ioaccel commands to drain out */ accel_cmds_out = 0; - spin_lock_irqsave(&h->lock, flags); - list_for_each_entry(c, &h->cmpQ, list) - accel_cmds_out += is_accelerated_cmd(c); - list_for_each_entry(c, &h->reqQ, list) - accel_cmds_out += is_accelerated_cmd(c); - spin_unlock_irqrestore(&h->lock, flags); + for (i = 0; i < h->nr_cmds; i++) { + c = h->cmd_pool + i; + refcount = atomic_inc_return(&c->refcount); + if (refcount > 1) /* Command is allocated */ + accel_cmds_out += is_accelerated_cmd(c); + cmd_free(h, c); + } if (accel_cmds_out <= 0) break; msleep(100); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 8e06d9e280ec..657713050349 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -32,7 +32,6 @@ struct access_method { void (*submit_command)(struct ctlr_info *h, struct CommandList *c); void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); - unsigned long (*fifo_full)(struct ctlr_info *h); bool (*intr_pending)(struct ctlr_info *h); unsigned long (*command_completed)(struct ctlr_info *h, u8 q); }; @@ -47,6 +46,11 @@ struct hpsa_scsi_dev_t { unsigned char model[16]; /* bytes 16-31 of inquiry data */ unsigned char raid_level; /* from inquiry page 0xC1 */ unsigned char volume_offline; /* discovered via TUR or VPD */ + u16 queue_depth; /* max queue_depth for this device */ + atomic_t ioaccel_cmds_out; /* Only used for physical devices + * counts commands sent to physical + * device via "ioaccel" path. + */ u32 ioaccel_handle; int offload_config; /* I/O accel RAID offload configured */ int offload_enabled; /* I/O accel RAID offload enabled */ @@ -55,6 +59,15 @@ struct hpsa_scsi_dev_t { */ struct raid_map_data raid_map; /* I/O accelerator RAID map */ + /* + * Pointers from logical drive map indices to the phys drives that + * make those logical drives. Note, multiple logical drives may + * share physical drives. You can have for instance 5 physical + * drives with 3 logical drives each using those same 5 physical + * disks. We need these pointers for counting i/o's out to physical + * devices in order to honor physical device queue depth limits. + */ + struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES]; }; struct reply_queue_buffer { @@ -115,9 +128,12 @@ struct ctlr_info { void __iomem *vaddr; unsigned long paddr; int nr_cmds; /* Number of commands allowed on this controller */ +#define HPSA_CMDS_RESERVED_FOR_ABORTS 2 +#define HPSA_CMDS_RESERVED_FOR_DRIVER 1 struct CfgTable __iomem *cfgtable; int interrupts_enabled; int max_commands; + int last_allocation; atomic_t commands_outstanding; # define PERF_MODE_INT 0 # define DOORBELL_INT 1 @@ -131,8 +147,6 @@ struct ctlr_info { char hba_mode_enabled; /* queue and queue Info */ - struct list_head reqQ; - struct list_head cmpQ; unsigned int Qdepth; unsigned int maxSG; spinlock_t lock; @@ -168,9 +182,8 @@ struct ctlr_info { unsigned long transMethod; /* cap concurrent passthrus at some reasonable maximum */ -#define HPSA_MAX_CONCURRENT_PASSTHRUS (20) - spinlock_t passthru_count_lock; /* protects passthru_count */ - int passthru_count; +#define HPSA_MAX_CONCURRENT_PASSTHRUS (10) + atomic_t passthru_cmds_avail; /* * Performant mode completion buffers @@ -194,8 +207,8 @@ struct ctlr_info { atomic_t firmware_flash_in_progress; u32 __percpu *lockup_detected; struct delayed_work monitor_ctlr_work; + struct delayed_work rescan_ctlr_work; int remove_in_progress; - u32 fifo_recently_full; /* Address of h->q[x] is passed to intr handler to know which queue */ u8 q[MAX_REPLY_QUEUES]; u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */ @@ -237,8 +250,9 @@ struct ctlr_info { spinlock_t offline_device_lock; struct list_head offline_device_list; int acciopath_status; - int drv_req_rescan; /* flag for driver to request rescan event */ int raid_offload_debug; + struct workqueue_struct *resubmit_wq; + struct workqueue_struct *rescan_ctlr_wq; }; struct offline_device_entry { @@ -297,6 +311,8 @@ struct offline_device_entry { */ #define SA5_DOORBELL 0x20 #define SA5_REQUEST_PORT_OFFSET 0x40 +#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0 +#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4 #define SA5_REPLY_INTR_MASK_OFFSET 0x34 #define SA5_REPLY_PORT_OFFSET 0x44 #define SA5_INTR_STATUS 0x30 @@ -353,10 +369,7 @@ static void SA5_submit_command_no_read(struct ctlr_info *h, static void SA5_submit_command_ioaccel2(struct ctlr_info *h, struct CommandList *c) { - if (c->cmd_type == CMD_IOACCEL2) - writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); - else - writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); } /* @@ -398,19 +411,19 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q) unsigned long register_value = FIFO_EMPTY; /* msi auto clears the interrupt pending bit. */ - if (!(h->msi_vector || h->msix_vector)) { + if (unlikely(!(h->msi_vector || h->msix_vector))) { /* flush the controller write of the reply queue by reading * outbound doorbell status register. */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + (void) readl(h->vaddr + SA5_OUTDB_STATUS); writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); /* Do a read in order to flush the write to the controller * (as per spec.) */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + (void) readl(h->vaddr + SA5_OUTDB_STATUS); } - if ((rq->head[rq->current_entry] & 1) == rq->wraparound) { + if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) { register_value = rq->head[rq->current_entry]; rq->current_entry++; atomic_dec(&h->commands_outstanding); @@ -426,14 +439,6 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q) } /* - * Returns true if fifo is full. - * - */ -static unsigned long SA5_fifo_full(struct ctlr_info *h) -{ - return atomic_read(&h->commands_outstanding) >= h->max_commands; -} -/* * returns value read from hardware. * returns FIFO_EMPTY if there is nothing to read */ @@ -473,9 +478,6 @@ static bool SA5_performant_intr_pending(struct ctlr_info *h) if (!register_value) return false; - if (h->msi_vector || h->msix_vector) - return true; - /* Read outbound doorbell to flush */ register_value = readl(h->vaddr + SA5_OUTDB_STATUS); return register_value & SA5_OUTDB_STATUS_PERF_BIT; @@ -525,7 +527,6 @@ static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q) static struct access_method SA5_access = { SA5_submit_command, SA5_intr_mask, - SA5_fifo_full, SA5_intr_pending, SA5_completed, }; @@ -533,7 +534,6 @@ static struct access_method SA5_access = { static struct access_method SA5_ioaccel_mode1_access = { SA5_submit_command, SA5_performant_intr_mask, - SA5_fifo_full, SA5_ioaccel_mode1_intr_pending, SA5_ioaccel_mode1_completed, }; @@ -541,7 +541,6 @@ static struct access_method SA5_ioaccel_mode1_access = { static struct access_method SA5_ioaccel_mode2_access = { SA5_submit_command_ioaccel2, SA5_performant_intr_mask, - SA5_fifo_full, SA5_performant_intr_pending, SA5_performant_completed, }; @@ -549,7 +548,6 @@ static struct access_method SA5_ioaccel_mode2_access = { static struct access_method SA5_performant_access = { SA5_submit_command, SA5_performant_intr_mask, - SA5_fifo_full, SA5_performant_intr_pending, SA5_performant_completed, }; @@ -557,7 +555,6 @@ static struct access_method SA5_performant_access = { static struct access_method SA5_performant_access_no_read = { SA5_submit_command_no_read, SA5_performant_intr_mask, - SA5_fifo_full, SA5_performant_intr_pending, SA5_performant_completed, }; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index cb988c41cad9..3a621c74b76f 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -206,27 +206,27 @@ struct raid_map_disk_data { }; struct raid_map_data { - u32 structure_size; /* Size of entire structure in bytes */ - u32 volume_blk_size; /* bytes / block in the volume */ - u64 volume_blk_cnt; /* logical blocks on the volume */ + __le32 structure_size; /* Size of entire structure in bytes */ + __le32 volume_blk_size; /* bytes / block in the volume */ + __le64 volume_blk_cnt; /* logical blocks on the volume */ u8 phys_blk_shift; /* Shift factor to convert between * units of logical blocks and physical * disk blocks */ u8 parity_rotation_shift; /* Shift factor to convert between units * of logical stripes and physical * stripes */ - u16 strip_size; /* blocks used on each disk / stripe */ - u64 disk_starting_blk; /* First disk block used in volume */ - u64 disk_blk_cnt; /* disk blocks used by volume / disk */ - u16 data_disks_per_row; /* data disk entries / row in the map */ - u16 metadata_disks_per_row; /* mirror/parity disk entries / row + __le16 strip_size; /* blocks used on each disk / stripe */ + __le64 disk_starting_blk; /* First disk block used in volume */ + __le64 disk_blk_cnt; /* disk blocks used by volume / disk */ + __le16 data_disks_per_row; /* data disk entries / row in the map */ + __le16 metadata_disks_per_row;/* mirror/parity disk entries / row * in the map */ - u16 row_cnt; /* rows in each layout map */ - u16 layout_map_count; /* layout maps (1 map per mirror/parity + __le16 row_cnt; /* rows in each layout map */ + __le16 layout_map_count; /* layout maps (1 map per mirror/parity * group) */ - u16 flags; /* Bit 0 set if encryption enabled */ + __le16 flags; /* Bit 0 set if encryption enabled */ #define RAID_MAP_FLAG_ENCRYPT_ON 0x01 - u16 dekindex; /* Data encryption key index. */ + __le16 dekindex; /* Data encryption key index. */ u8 reserved[16]; struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES]; }; @@ -240,6 +240,10 @@ struct ReportLUNdata { struct ext_report_lun_entry { u8 lunid[8]; +#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F) +#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6]) +#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \ + GET_BMIC_LEVEL_TWO_TARGET((lunid))) u8 wwid[8]; u8 device_type; u8 device_flags; @@ -268,6 +272,7 @@ struct SenseSubsystem_info { #define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ #define BMIC_FLASH_FIRMWARE 0xF7 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64 +#define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15 /* Command List Structure */ union SCSI3Addr { @@ -313,8 +318,8 @@ union LUNAddr { struct CommandListHeader { u8 ReplyQueue; u8 SGList; - u16 SGTotal; - u64 tag; + __le16 SGTotal; + __le64 tag; union LUNAddr LUN; }; @@ -338,14 +343,14 @@ struct RequestBlock { }; struct ErrDescriptor { - u64 Addr; - u32 Len; + __le64 Addr; + __le32 Len; }; struct SGDescriptor { - u64 Addr; - u32 Len; - u32 Ext; + __le64 Addr; + __le32 Len; + __le32 Ext; }; union MoreErrInfo { @@ -375,22 +380,19 @@ struct ErrorInfo { #define CMD_IOACCEL1 0x04 #define CMD_IOACCEL2 0x05 -#define DIRECT_LOOKUP_SHIFT 5 -#define DIRECT_LOOKUP_BIT 0x10 +#define DIRECT_LOOKUP_SHIFT 4 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1)) #define HPSA_ERROR_BIT 0x02 struct ctlr_info; /* defined in hpsa.h */ -/* The size of this structure needs to be divisible by 32 - * on all architectures because low 5 bits of the addresses +/* The size of this structure needs to be divisible by 128 + * on all architectures. The low 4 bits of the addresses * are used as follows: * * bit 0: to device, used to indicate "performant mode" command * from device, indidcates error status. * bit 1-3: to device, indicates block fetch table entry for * reducing DMA in fetching commands from host memory. - * bit 4: used to indicate whether tag is "direct lookup" (index), - * or a bus address. */ #define COMMANDLIST_ALIGNMENT 128 @@ -405,9 +407,21 @@ struct CommandList { struct ctlr_info *h; int cmd_type; long cmdindex; - struct list_head list; struct completion *waiting; - void *scsi_cmd; + struct scsi_cmnd *scsi_cmd; + struct work_struct work; + + /* + * For commands using either of the two "ioaccel" paths to + * bypass the RAID stack and go directly to the physical disk + * phys_disk is a pointer to the hpsa_scsi_dev_t to which the + * i/o is destined. We need to store that here because the command + * may potentially encounter TASK SET FULL and need to be resubmitted + * For "normal" i/o's not using the "ioaccel" paths, phys_disk is + * not used. + */ + struct hpsa_scsi_dev_t *phys_disk; + atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */ } __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ @@ -420,7 +434,7 @@ struct CommandList { */ #define IOACCEL1_COMMANDLIST_ALIGNMENT 128 struct io_accel1_cmd { - u16 dev_handle; /* 0x00 - 0x01 */ + __le16 dev_handle; /* 0x00 - 0x01 */ u8 reserved1; /* 0x02 */ u8 function; /* 0x03 */ u8 reserved2[8]; /* 0x04 - 0x0B */ @@ -430,20 +444,20 @@ struct io_accel1_cmd { u8 reserved4; /* 0x13 */ u8 sgl_offset; /* 0x14 */ u8 reserved5[7]; /* 0x15 - 0x1B */ - u32 transfer_len; /* 0x1C - 0x1F */ + __le32 transfer_len; /* 0x1C - 0x1F */ u8 reserved6[4]; /* 0x20 - 0x23 */ - u16 io_flags; /* 0x24 - 0x25 */ + __le16 io_flags; /* 0x24 - 0x25 */ u8 reserved7[14]; /* 0x26 - 0x33 */ u8 LUN[8]; /* 0x34 - 0x3B */ - u32 control; /* 0x3C - 0x3F */ + __le32 control; /* 0x3C - 0x3F */ u8 CDB[16]; /* 0x40 - 0x4F */ u8 reserved8[16]; /* 0x50 - 0x5F */ - u16 host_context_flags; /* 0x60 - 0x61 */ - u16 timeout_sec; /* 0x62 - 0x63 */ + __le16 host_context_flags; /* 0x60 - 0x61 */ + __le16 timeout_sec; /* 0x62 - 0x63 */ u8 ReplyQueue; /* 0x64 */ u8 reserved9[3]; /* 0x65 - 0x67 */ - u64 tag; /* 0x68 - 0x6F */ - u64 host_addr; /* 0x70 - 0x77 */ + __le64 tag; /* 0x68 - 0x6F */ + __le64 host_addr; /* 0x70 - 0x77 */ u8 CISS_LUN[8]; /* 0x78 - 0x7F */ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; } __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); @@ -470,8 +484,8 @@ struct io_accel1_cmd { #define IOACCEL1_BUSADDR_CMDTYPE 0x00000060 struct ioaccel2_sg_element { - u64 address; - u32 length; + __le64 address; + __le32 length; u8 reserved[3]; u8 chain_indicator; #define IOACCEL2_CHAIN 0x80 @@ -526,20 +540,20 @@ struct io_accel2_cmd { /* 0=off, 1=on */ u8 reply_queue; /* Reply Queue ID */ u8 reserved1; /* Reserved */ - u32 scsi_nexus; /* Device Handle */ - u32 Tag; /* cciss tag, lower 4 bytes only */ - u32 tweak_lower; /* Encryption tweak, lower 4 bytes */ + __le32 scsi_nexus; /* Device Handle */ + __le32 Tag; /* cciss tag, lower 4 bytes only */ + __le32 tweak_lower; /* Encryption tweak, lower 4 bytes */ u8 cdb[16]; /* SCSI Command Descriptor Block */ u8 cciss_lun[8]; /* 8 byte SCSI address */ - u32 data_len; /* Total bytes to transfer */ + __le32 data_len; /* Total bytes to transfer */ u8 cmd_priority_task_attr; /* priority and task attrs */ #define IOACCEL2_PRIORITY_MASK 0x78 #define IOACCEL2_ATTR_MASK 0x07 u8 sg_count; /* Number of sg elements */ - u16 dekindex; /* Data encryption key index */ - u64 err_ptr; /* Error Pointer */ - u32 err_len; /* Error Length*/ - u32 tweak_upper; /* Encryption tweak, upper 4 bytes */ + __le16 dekindex; /* Data encryption key index */ + __le64 err_ptr; /* Error Pointer */ + __le32 err_len; /* Error Length*/ + __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; struct io_accel2_scsi_response error_data; } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); @@ -563,18 +577,18 @@ struct hpsa_tmf_struct { u8 reserved1; /* byte 3 Reserved */ u32 it_nexus; /* SCSI I-T Nexus */ u8 lun_id[8]; /* LUN ID for TMF request */ - u64 tag; /* cciss tag associated w/ request */ - u64 abort_tag; /* cciss tag of SCSI cmd or task to abort */ - u64 error_ptr; /* Error Pointer */ - u32 error_len; /* Error Length */ + __le64 tag; /* cciss tag associated w/ request */ + __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ + __le64 error_ptr; /* Error Pointer */ + __le32 error_len; /* Error Length */ }; /* Configuration Table Structure */ struct HostWrite { - u32 TransportRequest; - u32 command_pool_addr_hi; - u32 CoalIntDelay; - u32 CoalIntCount; + __le32 TransportRequest; + __le32 command_pool_addr_hi; + __le32 CoalIntDelay; + __le32 CoalIntCount; }; #define SIMPLE_MODE 0x02 @@ -585,54 +599,54 @@ struct HostWrite { #define DRIVER_SUPPORT_UA_ENABLE 0x00000001 struct CfgTable { - u8 Signature[4]; - u32 SpecValence; - u32 TransportSupport; - u32 TransportActive; - struct HostWrite HostWrite; - u32 CmdsOutMax; - u32 BusTypes; - u32 TransMethodOffset; - u8 ServerName[16]; - u32 HeartBeat; - u32 driver_support; -#define ENABLE_SCSI_PREFETCH 0x100 -#define ENABLE_UNIT_ATTN 0x01 - u32 MaxScatterGatherElements; - u32 MaxLogicalUnits; - u32 MaxPhysicalDevices; - u32 MaxPhysicalDrivesPerLogicalUnit; - u32 MaxPerformantModeCommands; - u32 MaxBlockFetch; - u32 PowerConservationSupport; - u32 PowerConservationEnable; - u32 TMFSupportFlags; + u8 Signature[4]; + __le32 SpecValence; + __le32 TransportSupport; + __le32 TransportActive; + struct HostWrite HostWrite; + __le32 CmdsOutMax; + __le32 BusTypes; + __le32 TransMethodOffset; + u8 ServerName[16]; + __le32 HeartBeat; + __le32 driver_support; +#define ENABLE_SCSI_PREFETCH 0x100 +#define ENABLE_UNIT_ATTN 0x01 + __le32 MaxScatterGatherElements; + __le32 MaxLogicalUnits; + __le32 MaxPhysicalDevices; + __le32 MaxPhysicalDrivesPerLogicalUnit; + __le32 MaxPerformantModeCommands; + __le32 MaxBlockFetch; + __le32 PowerConservationSupport; + __le32 PowerConservationEnable; + __le32 TMFSupportFlags; u8 TMFTagMask[8]; u8 reserved[0x78 - 0x70]; - u32 misc_fw_support; /* offset 0x78 */ -#define MISC_FW_DOORBELL_RESET (0x02) -#define MISC_FW_DOORBELL_RESET2 (0x010) -#define MISC_FW_RAID_OFFLOAD_BASIC (0x020) -#define MISC_FW_EVENT_NOTIFY (0x080) + __le32 misc_fw_support; /* offset 0x78 */ +#define MISC_FW_DOORBELL_RESET 0x02 +#define MISC_FW_DOORBELL_RESET2 0x010 +#define MISC_FW_RAID_OFFLOAD_BASIC 0x020 +#define MISC_FW_EVENT_NOTIFY 0x080 u8 driver_version[32]; - u32 max_cached_write_size; - u8 driver_scratchpad[16]; - u32 max_error_info_length; - u32 io_accel_max_embedded_sg_count; - u32 io_accel_request_size_offset; - u32 event_notify; -#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) -#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) - u32 clear_event_notify; + __le32 max_cached_write_size; + u8 driver_scratchpad[16]; + __le32 max_error_info_length; + __le32 io_accel_max_embedded_sg_count; + __le32 io_accel_request_size_offset; + __le32 event_notify; +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) + __le32 clear_event_notify; }; #define NUM_BLOCKFETCH_ENTRIES 8 struct TransTable_struct { - u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES]; - u32 RepQSize; - u32 RepQCount; - u32 RepQCtrAddrLow32; - u32 RepQCtrAddrHigh32; + __le32 BlockFetch[NUM_BLOCKFETCH_ENTRIES]; + __le32 RepQSize; + __le32 RepQCount; + __le32 RepQCtrAddrLow32; + __le32 RepQCtrAddrHigh32; #define MAX_REPLY_QUEUES 64 struct vals32 RepQAddr[MAX_REPLY_QUEUES]; }; @@ -644,5 +658,137 @@ struct hpsa_pci_info { u32 board_id; }; +struct bmic_identify_physical_device { + u8 scsi_bus; /* SCSI Bus number on controller */ + u8 scsi_id; /* SCSI ID on this bus */ + __le16 block_size; /* sector size in bytes */ + __le32 total_blocks; /* number for sectors on drive */ + __le32 reserved_blocks; /* controller reserved (RIS) */ + u8 model[40]; /* Physical Drive Model */ + u8 serial_number[40]; /* Drive Serial Number */ + u8 firmware_revision[8]; /* drive firmware revision */ + u8 scsi_inquiry_bits; /* inquiry byte 7 bits */ + u8 compaq_drive_stamp; /* 0 means drive not stamped */ + u8 last_failure_reason; +#define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG 0x01 +#define BMIC_LAST_FAILURE_ERROR_ERASING_RIS 0x02 +#define BMIC_LAST_FAILURE_ERROR_SAVING_RIS 0x03 +#define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND 0x04 +#define BMIC_LAST_FAILURE_MARK_BAD_FAILED 0x05 +#define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP 0x06 +#define BMIC_LAST_FAILURE_TIMEOUT 0x07 +#define BMIC_LAST_FAILURE_AUTOSENSE_FAILED 0x08 +#define BMIC_LAST_FAILURE_MEDIUM_ERROR_1 0x09 +#define BMIC_LAST_FAILURE_MEDIUM_ERROR_2 0x0a +#define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE 0x0b +#define BMIC_LAST_FAILURE_NOT_READY 0x0c +#define BMIC_LAST_FAILURE_HARDWARE_ERROR 0x0d +#define BMIC_LAST_FAILURE_ABORTED_COMMAND 0x0e +#define BMIC_LAST_FAILURE_WRITE_PROTECTED 0x0f +#define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER 0x10 +#define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR 0x11 +#define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG 0x12 +#define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED 0x13 +#define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG 0x14 +#define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED 0x15 +#define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED 0x16 +#define BMIC_LAST_FAILURE_INQUIRY_FAILED 0x17 +#define BMIC_LAST_FAILURE_NON_DISK_DEVICE 0x18 +#define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED 0x19 +#define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE 0x1a +#define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED 0x1b +#define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED 0x1c +#define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP 0x1d +#define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED 0x1e +#define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR 0x1f +#define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS 0x20 +#define BMIC_LAST_FAILURE_WRONG_REPLACE 0x21 +#define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED 0x22 +#define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED 0x23 +#define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE 0x24 +#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG 0x25 +#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG 0x26 +#define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED 0x27 +#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY 0x28 +#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED 0x29 +#define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY 0x2a +#define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED 0x2b + +#define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED 0x37 +#define BMIC_LAST_FAILURE_PHY_RESET_FAILED 0x38 +#define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE 0x40 +#define BMIC_LAST_FAILURE_KC_VOLUME_FAILED 0x41 +#define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT 0x42 +#define BMIC_LAST_FAILURE_OFFLINE_ERASE 0x80 +#define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL 0x81 +#define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX 0x82 +#define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE 0x83 + + u8 flags; + u8 more_flags; + u8 scsi_lun; /* SCSI LUN for phys drive */ + u8 yet_more_flags; + u8 even_more_flags; + __le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */ + u8 phys_connector[2]; /* connector number on controller */ + u8 phys_box_on_bus; /* phys enclosure this drive resides */ + u8 phys_bay_in_box; /* phys drv bay this drive resides */ + __le32 rpm; /* Drive rotational speed in rpm */ + u8 device_type; /* type of drive */ + u8 sata_version; /* only valid when drive_type is SATA */ + __le64 big_total_block_count; + __le64 ris_starting_lba; + __le32 ris_size; + u8 wwid[20]; + u8 controller_phy_map[32]; + __le16 phy_count; + u8 phy_connected_dev_type[256]; + u8 phy_to_drive_bay_num[256]; + __le16 phy_to_attached_dev_index[256]; + u8 box_index; + u8 reserved; + __le16 extra_physical_drive_flags; +#define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \ + (idphydrv->extra_physical_drive_flags & (1 << 10)) + u8 negotiated_link_rate[256]; + u8 phy_to_phy_map[256]; + u8 redundant_path_present_map; + u8 redundant_path_failure_map; + u8 active_path_number; + __le16 alternate_paths_phys_connector[8]; + u8 alternate_paths_phys_box_on_port[8]; + u8 multi_lun_device_lun_count; + u8 minimum_good_fw_revision[8]; + u8 unique_inquiry_bytes[20]; + u8 current_temperature_degreesC; + u8 temperature_threshold_degreesC; + u8 max_temperature_degreesC; + u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */ + __le16 current_queue_depth_limit; + u8 switch_name[10]; + __le16 switch_port; + u8 alternate_paths_switch_name[40]; + u8 alternate_paths_switch_port[8]; + __le16 power_on_hours; /* valid only if gas gauge supported */ + __le16 percent_endurance_used; /* valid only if gas gauge supported. */ +#define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \ + ((idphydrv->percent_endurance_used & 0x80) || \ + (idphydrv->percent_endurance_used > 10000)) + u8 drive_authentication; +#define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \ + (idphydrv->drive_authentication == 0x80) + u8 smart_carrier_authentication; +#define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \ + (idphydrv->smart_carrier_authentication != 0x0) +#define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \ + (idphydrv->smart_carrier_authentication == 0x01) + u8 smart_carrier_app_fw_version; + u8 smart_carrier_bootloader_fw_version; + u8 encryption_key_name[64]; + __le32 misc_drive_flags; + __le16 dek_index; + u8 padding[112]; +}; + #pragma pack() #endif /* HPSA_CMD_H */ diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c index ddf0694d87f0..3882d9f519c8 100644 --- a/drivers/scsi/in2000.c +++ b/drivers/scsi/in2000.c @@ -2226,36 +2226,36 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance) if (hd->proc & PR_INFO) { seq_printf(m, "\ndip_switch=%02x: irq=%d io=%02x floppy=%s sync/DOS5=%s", (hd->dip_switch & 0x7f), instance->irq, hd->io_base, (hd->dip_switch & 0x40) ? "Yes" : "No", (hd->dip_switch & 0x20) ? "Yes" : "No"); - seq_printf(m, "\nsync_xfer[] = "); + seq_puts(m, "\nsync_xfer[] = "); for (x = 0; x < 7; x++) seq_printf(m, "\t%02x", hd->sync_xfer[x]); - seq_printf(m, "\nsync_stat[] = "); + seq_puts(m, "\nsync_stat[] = "); for (x = 0; x < 7; x++) seq_printf(m, "\t%02x", hd->sync_stat[x]); } #ifdef PROC_STATISTICS if (hd->proc & PR_STATISTICS) { - seq_printf(m, "\ncommands issued: "); + seq_puts(m, "\ncommands issued: "); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->cmd_cnt[x]); - seq_printf(m, "\ndisconnects allowed:"); + seq_puts(m, "\ndisconnects allowed:"); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]); - seq_printf(m, "\ndisconnects done: "); + seq_puts(m, "\ndisconnects done: "); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->disc_done_cnt[x]); seq_printf(m, "\ninterrupts: \t%ld", hd->int_cnt); } #endif if (hd->proc & PR_CONNECTED) { - seq_printf(m, "\nconnected: "); + seq_puts(m, "\nconnected: "); if (hd->connected) { cmd = (Scsi_Cmnd *) hd->connected; seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); } } if (hd->proc & PR_INPUTQ) { - seq_printf(m, "\ninput_Q: "); + seq_puts(m, "\ninput_Q: "); cmd = (Scsi_Cmnd *) hd->input_Q; while (cmd) { seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); @@ -2263,7 +2263,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance) } } if (hd->proc & PR_DISCQ) { - seq_printf(m, "\ndisconnected_Q:"); + seq_puts(m, "\ndisconnected_Q:"); cmd = (Scsi_Cmnd *) hd->disconnected_Q; while (cmd) { seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); @@ -2273,7 +2273,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance) if (hd->proc & PR_TEST) { ; /* insert your own custom function here */ } - seq_printf(m, "\n"); + seq_putc(m, '\n'); spin_unlock_irqrestore(instance->host_lock, flags); #endif /* PROC_INTERFACE */ return 0; diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index e5c28435d768..7542f11d3fcd 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -2038,15 +2038,14 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m) { METHOD_TRACE("ips_host_info", 1); - seq_printf(m, "\nIBM ServeRAID General Information:\n\n"); + seq_puts(m, "\nIBM ServeRAID General Information:\n\n"); if ((le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) && (le16_to_cpu(ha->nvram->adapter_type) != 0)) seq_printf(m, "\tController Type : %s\n", ips_adapter_name[ha->ad_type - 1]); else - seq_printf(m, - "\tController Type : Unknown\n"); + seq_puts(m, "\tController Type : Unknown\n"); if (ha->io_addr) seq_printf(m, @@ -2138,7 +2137,7 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m) seq_printf(m, "\tCurrent Active PT Commands : %d\n", ha->num_ioctl); - seq_printf(m, "\n"); + seq_putc(m, '\n'); return 0; } diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 4c25485aa934..c66088d0fd2a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -2225,6 +2225,15 @@ lpfc_adisc_done(struct lpfc_vport *vport) if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && !(vport->fc_flag & FC_RSCN_MODE) && (phba->sli_rev < LPFC_SLI_REV4)) { + /* The ADISCs are complete. Doesn't matter if they + * succeeded or failed because the ADISC completion + * routine guarantees to call the state machine and + * the RPI is either unregistered (failed ADISC response) + * or the RPI is still valid and the node is marked + * mapped for a target. The exchanges should be in the + * correct state. This code is specific to SLI3. + */ + lpfc_issue_clear_la(phba, vport); lpfc_issue_reg_vpi(phba, vport); return; } diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 2485255f3414..bc7b34c02723 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -2240,7 +2240,7 @@ proc_show_battery(struct seq_file *m, void *v) goto free_pdev; if( mega_adapinq(adapter, dma_handle) != 0 ) { - seq_printf(m, "Adapter inquiry failed.\n"); + seq_puts(m, "Adapter inquiry failed.\n"); printk(KERN_WARNING "megaraid: inquiry failed.\n"); goto free_inquiry; } diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 0d44d91c2fce..14e5c7cea929 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -35,7 +35,7 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "06.805.06.01-rc1" +#define MEGASAS_VERSION "06.806.08.00-rc1" /* * Device IDs @@ -969,7 +969,20 @@ struct megasas_ctrl_info { struct { #if defined(__BIG_ENDIAN_BITFIELD) - u32 reserved:25; + u32 reserved:12; + u32 discardCacheDuringLDDelete:1; + u32 supportSecurityonJBOD:1; + u32 supportCacheBypassModes:1; + u32 supportDisableSESMonitoring:1; + u32 supportForceFlash:1; + u32 supportNVDRAM:1; + u32 supportDrvActivityLEDSetting:1; + u32 supportAllowedOpsforDrvRemoval:1; + u32 supportHOQRebuild:1; + u32 supportForceTo512e:1; + u32 supportNVCacheErase:1; + u32 supportDebugQueue:1; + u32 supportSwZone:1; u32 supportCrashDump:1; u32 supportMaxExtLDs:1; u32 supportT10RebuildAssist:1; @@ -981,9 +994,22 @@ struct megasas_ctrl_info { u32 supportThermalPollInterval:1; u32 supportDisableImmediateIO:1; u32 supportT10RebuildAssist:1; - u32 supportMaxExtLDs:1; - u32 supportCrashDump:1; - u32 reserved:25; + u32 supportMaxExtLDs:1; + u32 supportCrashDump:1; + u32 supportSwZone:1; + u32 supportDebugQueue:1; + u32 supportNVCacheErase:1; + u32 supportForceTo512e:1; + u32 supportHOQRebuild:1; + u32 supportAllowedOpsforDrvRemoval:1; + u32 supportDrvActivityLEDSetting:1; + u32 supportNVDRAM:1; + u32 supportForceFlash:1; + u32 supportDisableSESMonitoring:1; + u32 supportCacheBypassModes:1; + u32 supportSecurityonJBOD:1; + u32 discardCacheDuringLDDelete:1; + u32 reserved:12; #endif } adapterOperations3; @@ -1022,6 +1048,13 @@ enum MR_MFI_MPT_PTHR_FLAGS { MFI_MPT_ATTACHED = 2, }; +enum MR_SCSI_CMD_TYPE { + READ_WRITE_LDIO = 0, + NON_READ_WRITE_LDIO = 1, + READ_WRITE_SYSPDIO = 2, + NON_READ_WRITE_SYSPDIO = 3, +}; + /* Frame Type */ #define IO_FRAME 0 #define PTHRU_FRAME 1 @@ -1049,6 +1082,8 @@ enum MR_MFI_MPT_PTHR_FLAGS { */ #define MEGASAS_INT_CMDS 32 #define MEGASAS_SKINNY_INT_CMDS 5 +#define MEGASAS_FUSION_INTERNAL_CMDS 5 +#define MEGASAS_FUSION_IOCTL_CMDS 3 #define MEGASAS_MAX_MSIX_QUEUES 128 /* @@ -1194,19 +1229,23 @@ union megasas_sgl_frame { typedef union _MFI_CAPABILITIES { struct { #if defined(__BIG_ENDIAN_BITFIELD) - u32 reserved:27; + u32 reserved:25; + u32 security_protocol_cmds_fw:1; + u32 support_core_affinity:1; u32 support_ndrive_r1_lb:1; u32 support_max_255lds:1; - u32 reserved1:1; + u32 support_fastpath_wb:1; u32 support_additional_msix:1; u32 support_fp_remote_lun:1; #else u32 support_fp_remote_lun:1; u32 support_additional_msix:1; - u32 reserved1:1; + u32 support_fastpath_wb:1; u32 support_max_255lds:1; u32 support_ndrive_r1_lb:1; - u32 reserved:27; + u32 support_core_affinity:1; + u32 security_protocol_cmds_fw:1; + u32 reserved:25; #endif } mfi_capabilities; u32 reg; @@ -1638,20 +1677,20 @@ struct megasas_instance { u32 crash_dump_fw_support; u32 crash_dump_drv_support; u32 crash_dump_app_support; + u32 secure_jbod_support; spinlock_t crashdump_lock; struct megasas_register_set __iomem *reg_set; u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY]; struct megasas_pd_list pd_list[MEGASAS_MAX_PD]; struct megasas_pd_list local_pd_list[MEGASAS_MAX_PD]; - u8 ld_ids[MEGASAS_MAX_LD_IDS]; + u8 ld_ids[MEGASAS_MAX_LD_IDS]; s8 init_id; u16 max_num_sge; u16 max_fw_cmds; - /* For Fusion its num IOCTL cmds, for others MFI based its - max_fw_cmds */ u16 max_mfi_cmds; + u16 max_scsi_cmds; u32 max_sectors_per_req; struct megasas_aen_event *ev; @@ -1727,7 +1766,7 @@ struct megasas_instance { u8 requestorId; char PlasmaFW111; char mpio; - int throttlequeuedepth; + u16 throttlequeuedepth; u8 mask_interrupts; u8 is_imr; }; @@ -1946,5 +1985,6 @@ void __megasas_return_cmd(struct megasas_instance *instance, void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance, struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion); +int megasas_cmd_type(struct scsi_cmnd *cmd); #endif /*LSI_MEGARAID_SAS_H */ diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index ff283d23788a..890637fdd61e 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -78,7 +78,7 @@ static int allow_vf_ioctls; module_param(allow_vf_ioctls, int, S_IRUGO); MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0"); -static int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH; +static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH; module_param(throttlequeuedepth, int, S_IRUGO); MODULE_PARM_DESC(throttlequeuedepth, "Adapter queue depth when throttled due to I/O timeout. Default: 16"); @@ -1417,16 +1417,15 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp, } /** - * megasas_is_ldio - Checks if the cmd is for logical drive + * megasas_cmd_type - Checks if the cmd is for logical drive/sysPD + * and whether it's RW or non RW * @scmd: SCSI command * - * Called by megasas_queue_command to find out if the command to be queued - * is a logical drive command */ -inline int megasas_is_ldio(struct scsi_cmnd *cmd) +inline int megasas_cmd_type(struct scsi_cmnd *cmd) { - if (!MEGASAS_IS_LOGICAL(cmd)) - return 0; + int ret; + switch (cmd->cmnd[0]) { case READ_10: case WRITE_10: @@ -1436,10 +1435,14 @@ inline int megasas_is_ldio(struct scsi_cmnd *cmd) case WRITE_6: case READ_16: case WRITE_16: - return 1; + ret = (MEGASAS_IS_LOGICAL(cmd)) ? + READ_WRITE_LDIO : READ_WRITE_SYSPDIO; + break; default: - return 0; + ret = (MEGASAS_IS_LOGICAL(cmd)) ? + NON_READ_WRITE_LDIO : NON_READ_WRITE_SYSPDIO; } + return ret; } /** @@ -1471,7 +1474,7 @@ megasas_dump_pending_frames(struct megasas_instance *instance) if(!cmd->scmd) continue; printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr); - if (megasas_is_ldio(cmd->scmd)){ + if (megasas_cmd_type(cmd->scmd) == READ_WRITE_LDIO) { ldio = (struct megasas_io_frame *)cmd->frame; mfi_sgl = &ldio->sgl; sgcount = ldio->sge_count; @@ -1531,7 +1534,7 @@ megasas_build_and_issue_cmd(struct megasas_instance *instance, /* * Logical drive command */ - if (megasas_is_ldio(scmd)) + if (megasas_cmd_type(scmd) == READ_WRITE_LDIO) frame_count = megasas_build_ldio(instance, scmd, cmd); else frame_count = megasas_build_dcdb(instance, scmd, cmd); @@ -1689,22 +1692,66 @@ static int megasas_slave_alloc(struct scsi_device *sdev) return 0; } +/* +* megasas_complete_outstanding_ioctls - Complete outstanding ioctls after a +* kill adapter +* @instance: Adapter soft state +* +*/ +void megasas_complete_outstanding_ioctls(struct megasas_instance *instance) +{ + int i; + struct megasas_cmd *cmd_mfi; + struct megasas_cmd_fusion *cmd_fusion; + struct fusion_context *fusion = instance->ctrl_context; + + /* Find all outstanding ioctls */ + if (fusion) { + for (i = 0; i < instance->max_fw_cmds; i++) { + cmd_fusion = fusion->cmd_list[i]; + if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) { + cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx]; + if (cmd_mfi->sync_cmd && + cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT) + megasas_complete_cmd(instance, + cmd_mfi, DID_OK); + } + } + } else { + for (i = 0; i < instance->max_fw_cmds; i++) { + cmd_mfi = instance->cmd_list[i]; + if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd != + MFI_CMD_ABORT) + megasas_complete_cmd(instance, cmd_mfi, DID_OK); + } + } +} + + void megaraid_sas_kill_hba(struct megasas_instance *instance) { + /* Set critical error to block I/O & ioctls in case caller didn't */ + instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR; + /* Wait 1 second to ensure IO or ioctls in build have posted */ + msleep(1000); if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) { - writel(MFI_STOP_ADP, &instance->reg_set->doorbell); + (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) { + writel(MFI_STOP_ADP, + &instance->reg_set->doorbell); /* Flush */ readl(&instance->reg_set->doorbell); if (instance->mpio && instance->requestorId) memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS); } else { - writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell); + writel(MFI_STOP_ADP, + &instance->reg_set->inbound_doorbell); } + /* Complete outstanding ioctls when adapter is killed */ + megasas_complete_outstanding_ioctls(instance); } /** @@ -1717,6 +1764,7 @@ void megasas_check_and_restore_queue_depth(struct megasas_instance *instance) { unsigned long flags; + if (instance->flag & MEGASAS_FW_BUSY && time_after(jiffies, instance->last_time + 5 * HZ) && atomic_read(&instance->fw_outstanding) < @@ -1724,13 +1772,8 @@ megasas_check_and_restore_queue_depth(struct megasas_instance *instance) spin_lock_irqsave(instance->host->host_lock, flags); instance->flag &= ~MEGASAS_FW_BUSY; - if (instance->is_imr) { - instance->host->can_queue = - instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS; - } else - instance->host->can_queue = - instance->max_fw_cmds - MEGASAS_INT_CMDS; + instance->host->can_queue = instance->max_scsi_cmds; spin_unlock_irqrestore(instance->host->host_lock, flags); } } @@ -3028,10 +3071,9 @@ megasas_issue_pending_cmds_again(struct megasas_instance *instance) "was tried multiple times during reset." "Shutting down the HBA\n", cmd, cmd->scmd, cmd->sync_cmd); + instance->instancet->disable_intr(instance); + atomic_set(&instance->fw_reset_no_pci_access, 1); megaraid_sas_kill_hba(instance); - - instance->adprecovery = - MEGASAS_HW_CRITICAL_ERROR; return; } } @@ -3165,8 +3207,8 @@ process_fw_state_change_wq(struct work_struct *work) if (megasas_transition_to_ready(instance, 1)) { printk(KERN_NOTICE "megaraid_sas:adapter not ready\n"); + atomic_set(&instance->fw_reset_no_pci_access, 1); megaraid_sas_kill_hba(instance); - instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR; return ; } @@ -3547,7 +3589,6 @@ static int megasas_create_frame_pool(struct megasas_instance *instance) int i; u32 max_cmd; u32 sge_sz; - u32 sgl_sz; u32 total_sz; u32 frame_count; struct megasas_cmd *cmd; @@ -3566,24 +3607,23 @@ static int megasas_create_frame_pool(struct megasas_instance *instance) } /* - * Calculated the number of 64byte frames required for SGL - */ - sgl_sz = sge_sz * instance->max_num_sge; - frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE; - frame_count = 15; - - /* - * We need one extra frame for the MFI command + * For MFI controllers. + * max_num_sge = 60 + * max_sge_sz = 16 byte (sizeof megasas_sge_skinny) + * Total 960 byte (15 MFI frame of 64 byte) + * + * Fusion adapter require only 3 extra frame. + * max_num_sge = 16 (defined as MAX_IOCTL_SGE) + * max_sge_sz = 12 byte (sizeof megasas_sge64) + * Total 192 byte (3 MFI frame of 64 byte) */ - frame_count++; - + frame_count = instance->ctrl_context ? (3 + 1) : (15 + 1); total_sz = MEGAMFI_FRAME_SIZE * frame_count; /* * Use DMA pool facility provided by PCI layer */ instance->frame_dma_pool = pci_pool_create("megasas frame pool", - instance->pdev, total_sz, 64, - 0); + instance->pdev, total_sz, 256, 0); if (!instance->frame_dma_pool) { printk(KERN_DEBUG "megasas: failed to setup frame pool\n"); @@ -4631,28 +4671,48 @@ static int megasas_init_fw(struct megasas_instance *instance) instance->crash_dump_h); instance->crash_dump_buf = NULL; } + + instance->secure_jbod_support = + ctrl_info->adapterOperations3.supportSecurityonJBOD; + if (instance->secure_jbod_support) + dev_info(&instance->pdev->dev, "Firmware supports Secure JBOD\n"); instance->max_sectors_per_req = instance->max_num_sge * PAGE_SIZE / 512; if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors)) instance->max_sectors_per_req = tmp_sectors; - /* Check for valid throttlequeuedepth module parameter */ - if (instance->is_imr) { - if (throttlequeuedepth > (instance->max_fw_cmds - - MEGASAS_SKINNY_INT_CMDS)) - instance->throttlequeuedepth = - MEGASAS_THROTTLE_QUEUE_DEPTH; - else - instance->throttlequeuedepth = throttlequeuedepth; + /* + * 1. For fusion adapters, 3 commands for IOCTL and 5 commands + * for driver's internal DCMDs. + * 2. For MFI skinny adapters, 5 commands for IOCTL + driver's + * internal DCMDs. + * 3. For rest of MFI adapters, 27 commands reserved for IOCTLs + * and 5 commands for drivers's internal DCMD. + */ + if (instance->ctrl_context) { + instance->max_scsi_cmds = instance->max_fw_cmds - + (MEGASAS_FUSION_INTERNAL_CMDS + + MEGASAS_FUSION_IOCTL_CMDS); + sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + } else if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) { + instance->max_scsi_cmds = instance->max_fw_cmds - + MEGASAS_SKINNY_INT_CMDS; + sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS); } else { - if (throttlequeuedepth > (instance->max_fw_cmds - - MEGASAS_INT_CMDS)) - instance->throttlequeuedepth = - MEGASAS_THROTTLE_QUEUE_DEPTH; - else - instance->throttlequeuedepth = throttlequeuedepth; + instance->max_scsi_cmds = instance->max_fw_cmds - + MEGASAS_INT_CMDS; + sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5)); } + /* Check for valid throttlequeuedepth module parameter */ + if (throttlequeuedepth && + throttlequeuedepth <= instance->max_scsi_cmds) + instance->throttlequeuedepth = throttlequeuedepth; + else + instance->throttlequeuedepth = + MEGASAS_THROTTLE_QUEUE_DEPTH; + /* * Setup tasklet for cmd completion */ @@ -4947,12 +5007,7 @@ static int megasas_io_attach(struct megasas_instance *instance) */ host->irq = instance->pdev->irq; host->unique_id = instance->unique_id; - if (instance->is_imr) { - host->can_queue = - instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS; - } else - host->can_queue = - instance->max_fw_cmds - MEGASAS_INT_CMDS; + host->can_queue = instance->max_scsi_cmds; host->this_id = instance->init_id; host->sg_tablesize = instance->max_num_sge; @@ -5130,8 +5185,6 @@ static int megasas_probe_one(struct pci_dev *pdev, ((1 << PAGE_SHIFT) << instance->ctrl_context_pages)); INIT_LIST_HEAD(&fusion->cmd_pool); spin_lock_init(&fusion->mpt_pool_lock); - memset(fusion->load_balance_info, 0, - sizeof(struct LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES_EXT); } break; default: /* For all other supported controllers */ @@ -5215,12 +5268,10 @@ static int megasas_probe_one(struct pci_dev *pdev, instance->init_id = MEGASAS_DEFAULT_INIT_ID; instance->ctrl_info = NULL; + if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) { + (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) instance->flag_ieee = 1; - sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS); - } else - sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5)); megasas_dbg_lvl = 0; instance->flag = 0; @@ -6215,9 +6266,6 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg) goto out_kfree_ioc; } - /* - * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds - */ if (down_interruptible(&instance->ioctl_sem)) { error = -ERESTARTSYS; goto out_kfree_ioc; diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c index 460c6a3d4ade..4f72287860ee 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -172,6 +172,7 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance) struct MR_FW_RAID_MAP_ALL *fw_map_old = NULL; struct MR_FW_RAID_MAP *pFwRaidMap = NULL; int i; + u16 ld_count; struct MR_DRV_RAID_MAP_ALL *drv_map = @@ -191,9 +192,10 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance) fw_map_old = (struct MR_FW_RAID_MAP_ALL *) fusion->ld_map[(instance->map_id & 1)]; pFwRaidMap = &fw_map_old->raidMap; + ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount); #if VD_EXT_DEBUG - for (i = 0; i < le16_to_cpu(pFwRaidMap->ldCount); i++) { + for (i = 0; i < ld_count; i++) { dev_dbg(&instance->pdev->dev, "(%d) :Index 0x%x " "Target Id 0x%x Seq Num 0x%x Size 0/%llx\n", instance->unique_id, i, @@ -205,12 +207,15 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance) memset(drv_map, 0, fusion->drv_map_sz); pDrvRaidMap->totalSize = pFwRaidMap->totalSize; - pDrvRaidMap->ldCount = (__le16)pFwRaidMap->ldCount; + pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count); pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec; for (i = 0; i < MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS; i++) pDrvRaidMap->ldTgtIdToLd[i] = (u8)pFwRaidMap->ldTgtIdToLd[i]; - for (i = 0; i < le16_to_cpu(pDrvRaidMap->ldCount); i++) { + for (i = (MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS); + i < MAX_LOGICAL_DRIVES_EXT; i++) + pDrvRaidMap->ldTgtIdToLd[i] = 0xff; + for (i = 0; i < ld_count; i++) { pDrvRaidMap->ldSpanMap[i] = pFwRaidMap->ldSpanMap[i]; #if VD_EXT_DEBUG dev_dbg(&instance->pdev->dev, @@ -252,7 +257,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance) struct LD_LOAD_BALANCE_INFO *lbInfo; PLD_SPAN_INFO ldSpanInfo; struct MR_LD_RAID *raid; - int ldCount, num_lds; + u16 ldCount, num_lds; u16 ld; u32 expected_size; @@ -356,7 +361,7 @@ static int getSpanInfo(struct MR_DRV_RAID_MAP_ALL *map, for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) { ld = MR_TargetIdToLdGet(ldCount, map); - if (ld >= MAX_LOGICAL_DRIVES_EXT) + if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1)) continue; raid = MR_LdRaidGet(ld, map); dev_dbg(&instance->pdev->dev, "LD %x: span_depth=%x\n", @@ -1157,7 +1162,7 @@ void mr_update_span_set(struct MR_DRV_RAID_MAP_ALL *map, for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) { ld = MR_TargetIdToLdGet(ldCount, map); - if (ld >= MAX_LOGICAL_DRIVES_EXT) + if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1)) continue; raid = MR_LdRaidGet(ld, map); for (element = 0; element < MAX_QUAD_DEPTH; element++) { diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 71557f64bb5e..675b5e7aba94 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -63,7 +63,6 @@ extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance extern void megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, u8 alt_status); -int megasas_is_ldio(struct scsi_cmnd *cmd); int wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd, int seconds); @@ -103,6 +102,8 @@ megasas_enable_intr_fusion(struct megasas_instance *instance) { struct megasas_register_set __iomem *regs; regs = instance->reg_set; + + instance->mask_interrupts = 0; /* For Thunderbolt/Invader also clear intr on enable */ writel(~0, ®s->outbound_intr_status); readl(®s->outbound_intr_status); @@ -111,7 +112,6 @@ megasas_enable_intr_fusion(struct megasas_instance *instance) /* Dummy readl to force pci flush */ readl(®s->outbound_intr_mask); - instance->mask_interrupts = 0; } /** @@ -196,6 +196,7 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance, cmd->scmd = NULL; cmd->sync_cmd_idx = (u32)ULONG_MAX; + memset(cmd->io_request, 0, sizeof(struct MPI2_RAID_SCSI_IO_REQUEST)); list_add(&cmd->list, (&fusion->cmd_pool)->next); spin_unlock_irqrestore(&fusion->mpt_pool_lock, flags); @@ -689,6 +690,8 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) = 1; init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb = 1; + init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw + = 1; /* Convert capability to LE32 */ cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities); @@ -698,12 +701,11 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) cpu_to_le32(lower_32_bits(ioc_init_handle)); init_frame->data_xfer_len = cpu_to_le32(sizeof(struct MPI2_IOC_INIT_REQUEST)); - req_desc.Words = 0; + req_desc.u.low = cpu_to_le32(lower_32_bits(cmd->frame_phys_addr)); + req_desc.u.high = cpu_to_le32(upper_32_bits(cmd->frame_phys_addr)); req_desc.MFAIo.RequestFlags = (MEGASAS_REQ_DESCRIPT_FLAGS_MFA << - MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); - cpu_to_le32s((u32 *)&req_desc.MFAIo); - req_desc.Words |= cpu_to_le64(cmd->frame_phys_addr); + MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); /* * disable the intr before firing the init frame @@ -1017,8 +1019,12 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) * does not exceed max cmds that the FW can support */ instance->max_fw_cmds = instance->max_fw_cmds-1; - /* Only internal cmds (DCMD) need to have MFI frames */ - instance->max_mfi_cmds = MEGASAS_INT_CMDS; + + /* + * Only Driver's internal DCMDs and IOCTL DCMDs needs to have MFI frames + */ + instance->max_mfi_cmds = + MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS; max_cmd = instance->max_fw_cmds; @@ -1285,6 +1291,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance, sgl_ptr = (struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame; + memset(sgl_ptr, 0, MEGASAS_MAX_SZ_CHAIN_FRAME); } } @@ -1658,6 +1665,8 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance, u32 device_id; struct MPI2_RAID_SCSI_IO_REQUEST *io_request; u16 pd_index = 0; + u16 os_timeout_value; + u16 timeout_limit; struct MR_DRV_RAID_MAP_ALL *local_map_ptr; struct fusion_context *fusion = instance->ctrl_context; u8 span, physArm; @@ -1674,52 +1683,66 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance, io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); - - /* Check if this is a system PD I/O */ if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS && instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) { - io_request->Function = 0; if (fusion->fast_path_io) io_request->DevHandle = local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; - io_request->RaidContext.timeoutValue = - local_map_ptr->raidMap.fpPdIoTimeoutSec; - io_request->RaidContext.regLockFlags = 0; - io_request->RaidContext.regLockRowLBA = 0; - io_request->RaidContext.regLockLength = 0; io_request->RaidContext.RAIDFlags = - MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD << - MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT; - if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) || - (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) - io_request->IoFlags |= cpu_to_le16( - MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH); - cmd->request_desc->SCSIIO.RequestFlags = - (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY << - MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); - cmd->request_desc->SCSIIO.DevHandle = - local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; + MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD + << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT; + cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; cmd->request_desc->SCSIIO.MSIxIndex = instance->msix_vectors ? smp_processor_id() % instance->msix_vectors : 0; - /* - * If the command is for the tape device, set the - * FP timeout to the os layer timeout value. - */ - if (scmd->device->type == TYPE_TAPE) { - if ((scmd->request->timeout / HZ) > 0xFFFF) - io_request->RaidContext.timeoutValue = - 0xFFFF; - else - io_request->RaidContext.timeoutValue = - scmd->request->timeout / HZ; + os_timeout_value = scmd->request->timeout / HZ; + + if (instance->secure_jbod_support && + (megasas_cmd_type(scmd) == NON_READ_WRITE_SYSPDIO)) { + /* system pd firmware path */ + io_request->Function = + MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST; + cmd->request_desc->SCSIIO.RequestFlags = + (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << + MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); + io_request->RaidContext.timeoutValue = + cpu_to_le16(os_timeout_value); + } else { + /* system pd Fast Path */ + io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + io_request->RaidContext.regLockFlags = 0; + io_request->RaidContext.regLockRowLBA = 0; + io_request->RaidContext.regLockLength = 0; + timeout_limit = (scmd->device->type == TYPE_DISK) ? + 255 : 0xFFFF; + io_request->RaidContext.timeoutValue = + cpu_to_le16((os_timeout_value > timeout_limit) ? + timeout_limit : os_timeout_value); + if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) + io_request->IoFlags |= + cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH); + + cmd->request_desc->SCSIIO.RequestFlags = + (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY << + MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); } } else { if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS) goto NonFastPath; + /* + * For older firmware, Driver should not access ldTgtIdToLd + * beyond index 127 and for Extended VD firmware, ldTgtIdToLd + * should not go beyond 255. + */ + + if ((!fusion->fast_path_io) || + (device_id >= instance->fw_supported_vd_count)) + goto NonFastPath; + ld = MR_TargetIdToLdGet(device_id, local_map_ptr); - if ((ld >= instance->fw_supported_vd_count) || - (!fusion->fast_path_io)) + + if (ld >= instance->fw_supported_vd_count) goto NonFastPath; raid = MR_LdRaidGet(ld, local_map_ptr); @@ -1811,7 +1834,7 @@ megasas_build_io_fusion(struct megasas_instance *instance, */ io_request->IoFlags = cpu_to_le16(scp->cmd_len); - if (megasas_is_ldio(scp)) + if (megasas_cmd_type(scp) == READ_WRITE_LDIO) megasas_build_ldio_fusion(instance, scp, cmd); else megasas_build_dcdb_fusion(instance, scp, cmd); @@ -2612,7 +2635,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout) instance->host->host_no); megaraid_sas_kill_hba(instance); instance->skip_heartbeat_timer_del = 1; - instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR; retval = FAILED; goto out; } @@ -2808,8 +2830,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout) dev_info(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__); - instance->adprecovery = - MEGASAS_HW_CRITICAL_ERROR; megaraid_sas_kill_hba(instance); retval = FAILED; } @@ -2858,7 +2878,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout) "adapter scsi%d.\n", instance->host->host_no); megaraid_sas_kill_hba(instance); instance->skip_heartbeat_timer_del = 1; - instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR; retval = FAILED; } else { /* For VF: Restart HB timer if we didn't OCR */ diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5ab7daee11be..56e6db2d5874 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -306,14 +306,9 @@ struct MPI2_RAID_SCSI_IO_REQUEST { * MPT RAID MFA IO Descriptor. */ struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR { -#if defined(__BIG_ENDIAN_BITFIELD) - u32 MessageAddress1:24; /* bits 31:8*/ - u32 RequestFlags:8; -#else u32 RequestFlags:8; - u32 MessageAddress1:24; /* bits 31:8*/ -#endif - u32 MessageAddress2; /* bits 61:32 */ + u32 MessageAddress1:24; + u32 MessageAddress2; }; /* Default Request Descriptor */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 088eefa67da8..7fc6f23bd9dc 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.32 + * mpi2.h Version: 02.00.35 * * Version History * --------------- @@ -83,6 +83,9 @@ * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. + * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. + * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -108,7 +111,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x20) +#define MPI2_HEADER_VERSION_UNIT (0x23) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index 510ef0dc8d7b..ee8d2d695d55 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.26 + * mpi2_cnfg.h Version: 02.00.29 * * Version History * --------------- @@ -157,6 +157,20 @@ * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to * match the specification. + * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for + * MPI2_CONFIG_PAGE_MAN_7. + * Added EnclosureLevel and ConnectorName fields to + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added EnclosureLevel field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 01-08-14 02.00.28 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and + * more defines for the BiosOptions field. * -------------------------------------------------------------------------- */ @@ -706,6 +720,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 #define MPI2_MANUFACTURING7_PAGEVERSION (0x01) /* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) @@ -1224,7 +1239,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ U32 BiosOptions; /* 0x04 */ U32 IOCSettings; /* 0x08 */ - U32 Reserved1; /* 0x0C */ + U8 SSUTimeout; /* 0x0C */ + U8 Reserved1; /* 0x0D */ + U16 Reserved2; /* 0x0E */ U32 DeviceSettings; /* 0x10 */ U16 NumberOfDevices; /* 0x14 */ U16 UEFIVersion; /* 0x16 */ @@ -1235,9 +1252,24 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; -#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) +#define MPI2_BIOSPAGE1_PAGEVERSION (0x07) /* values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000) + +#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300) +#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100) +#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300) + #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) @@ -2420,13 +2452,13 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 U8 PortGroups; /* 0x2C */ U8 DmaGroup; /* 0x2D */ U8 ControlGroup; /* 0x2E */ - U8 Reserved1; /* 0x2F */ - U32 Reserved2; /* 0x30 */ + U8 EnclosureLevel; /* 0x2F */ + U8 ConnectorName[4]; /* 0x30 */ U32 Reserved3; /* 0x34 */ } MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; -#define MPI2_SASDEVICE0_PAGEVERSION (0x08) +#define MPI2_SASDEVICE0_PAGEVERSION (0x09) /* values for SAS Device Page 0 AccessStatus field */ #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) @@ -2464,6 +2496,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) @@ -2732,7 +2765,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 U16 EnclosureHandle; /* 0x16 */ U16 NumSlots; /* 0x18 */ U16 StartSlot; /* 0x1A */ - U16 Reserved2; /* 0x1C */ + U8 Reserved2; /* 0x1C */ + U8 EnclosureLevel; /* 0x1D */ U16 SEPDevHandle; /* 0x1E */ U32 Reserved3; /* 0x20 */ U32 Reserved4; /* 0x24 */ @@ -2740,9 +2774,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; -#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) /* values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 2c3b0f28576b..b02de48be204 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.23 + * mpi2_ioc.h Version: 02.00.24 * * Version History * --------------- @@ -126,6 +126,7 @@ * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. + * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. * -------------------------------------------------------------------------- */ @@ -1589,6 +1590,7 @@ Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t; /* values for HashImageType */ #define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) #define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) +#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) /* values for HashAlgorithm */ #define MPI25_HASH_ALGORITHM_UNUSED (0x00) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 9be03ed46180..659b8ac83ceb 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -6,7 +6,7 @@ * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.11 + * mpi2_tool.h Version: 02.00.12 * * Version History * --------------- @@ -29,7 +29,8 @@ * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that * it uses MPI Chain SGE as well as MPI Simple SGE. - * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. + * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. + * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC. * -------------------------------------------------------------------------- */ @@ -101,6 +102,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST #define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) #define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) #define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000) #define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) #define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) #define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 58e45216d1ec..11248de92b3b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_base.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -639,6 +640,9 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc, if (!ioc->hide_ir_msg) desc = "Log Entry Added"; break; + case MPI2_EVENT_TEMP_THRESHOLD: + desc = "Temperature Threshold"; + break; } if (!desc) @@ -1296,6 +1300,8 @@ _base_free_irq(struct MPT2SAS_ADAPTER *ioc) list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + irq_set_affinity_hint(reply_q->vector, NULL); + free_cpumask_var(reply_q->affinity_hint); synchronize_irq(reply_q->vector); free_irq(reply_q->vector, reply_q); kfree(reply_q); @@ -1325,6 +1331,11 @@ _base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector) reply_q->ioc = ioc; reply_q->msix_index = index; reply_q->vector = vector; + + if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL)) + return -ENOMEM; + cpumask_clear(reply_q->affinity_hint); + atomic_set(&reply_q->busy, 0); if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", @@ -1359,6 +1370,7 @@ static void _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc) { unsigned int cpu, nr_cpus, nr_msix, index = 0; + struct adapter_reply_queue *reply_q; if (!_base_is_controller_msix_enabled(ioc)) return; @@ -1373,20 +1385,30 @@ _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc) cpu = cpumask_first(cpu_online_mask); - do { + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + unsigned int i, group = nr_cpus / nr_msix; + if (cpu >= nr_cpus) + break; + if (index < nr_cpus % nr_msix) group++; for (i = 0 ; i < group ; i++) { ioc->cpu_msix_table[cpu] = index; + cpumask_or(reply_q->affinity_hint, + reply_q->affinity_hint, get_cpu_mask(cpu)); cpu = cpumask_next(cpu, cpu_online_mask); } + if (irq_set_affinity_hint(reply_q->vector, + reply_q->affinity_hint)) + dinitprintk(ioc, pr_info(MPT2SAS_FMT + "error setting affinity hint for irq vector %d\n", + ioc->name, reply_q->vector)); index++; - - } while (cpu < nr_cpus); + } } /** @@ -2338,6 +2360,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); _base_display_ioc_capabilities(ioc); /* @@ -2355,6 +2378,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + if (ioc->iounit_pg8.NumSensors) + ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; } /** @@ -2486,9 +2511,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* command line tunables for max sgl entries */ if (max_sgl_entries != -1) { - ioc->shost->sg_tablesize = (max_sgl_entries < - MPT2SAS_SG_DEPTH) ? max_sgl_entries : - MPT2SAS_SG_DEPTH; + ioc->shost->sg_tablesize = min_t(unsigned short, + max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS); + if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH) + printk(MPT2SAS_WARN_FMT + "sg_tablesize(%u) is bigger than kernel defined" + " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name, + ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH); } else { ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH; } @@ -3236,7 +3265,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, u16 smid; u32 ioc_state; unsigned long timeleft; - u8 issue_reset; + bool issue_reset = false; int rc; void *request; u16 wait_state_count; @@ -3300,7 +3329,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, _debug_dump_mf(mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)/4); if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; + issue_reset = true; goto issue_host_reset; } if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) @@ -3341,7 +3370,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, u16 smid; u32 ioc_state; unsigned long timeleft; - u8 issue_reset; + bool issue_reset = false; int rc; void *request; u16 wait_state_count; @@ -3398,7 +3427,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, _debug_dump_mf(mpi_request, sizeof(Mpi2SepRequest_t)/4); if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; + issue_reset = true; goto issue_host_reset; } if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) @@ -4594,6 +4623,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD); r = _base_make_ioc_operational(ioc, CAN_SLEEP); if (r) goto out_free_resources; diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 239f169b0673..caff8d10cca4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_base.h * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -67,10 +68,10 @@ /* driver versioning info */ #define MPT2SAS_DRIVER_NAME "mpt2sas" -#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" +#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "18.100.00.00" -#define MPT2SAS_MAJOR_VERSION 18 +#define MPT2SAS_DRIVER_VERSION "20.100.00.00" +#define MPT2SAS_MAJOR_VERSION 20 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 #define MPT2SAS_RELEASE_VERSION 00 @@ -586,6 +587,7 @@ struct adapter_reply_queue { Mpi2ReplyDescriptorsUnion_t *reply_post_free; char name[MPT_NAME_LENGTH]; atomic_t busy; + cpumask_var_t affinity_hint; struct list_head list; }; @@ -725,6 +727,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc); * @ioc_pg8: static ioc page 8 * @iounit_pg0: static iounit page 0 * @iounit_pg1: static iounit page 1 + * @iounit_pg8: static iounit page 8 * @sas_hba: sas host object * @sas_expander_list: expander object list * @sas_node_lock: @@ -795,6 +798,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc); * @reply_post_host_index: head index in the pool where FW completes IO * @delayed_tr_list: target reset link list * @delayed_tr_volume_list: volume target reset link list + * @@temp_sensors_count: flag to carry the number of temperature sensors */ struct MPT2SAS_ADAPTER { struct list_head list; @@ -892,6 +896,7 @@ struct MPT2SAS_ADAPTER { Mpi2IOCPage8_t ioc_pg8; Mpi2IOUnitPage0_t iounit_pg0; Mpi2IOUnitPage1_t iounit_pg1; + Mpi2IOUnitPage8_t iounit_pg8; struct _boot_device req_boot_device; struct _boot_device req_alt_boot_device; @@ -992,6 +997,7 @@ struct MPT2SAS_ADAPTER { struct list_head delayed_tr_list; struct list_head delayed_tr_volume_list; + u8 temp_sensors_count; /* diag buffer support */ u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; @@ -1120,6 +1126,8 @@ int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page); int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz); int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index c72a2fff5dbb..c43815b1a485 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_base.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -719,6 +720,42 @@ mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc, } /** + * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 8; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index ca4e563c01dd..4e509604b571 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index 7f842c88abd2..46b2fc5b74af 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h index cc57ef31d0fe..277120d45648 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_debug.h +++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6a1c036a6f3f..3f26147bbc64 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -2729,9 +2730,18 @@ _scsih_host_reset(struct scsi_cmnd *scmd) ioc->name, scmd); scsi_print_command(scmd); + if (ioc->is_driver_loading) { + printk(MPT2SAS_INFO_FMT "Blocking the host reset\n", + ioc->name); + r = FAILED; + goto out; + } + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); r = (retval < 0) ? FAILED : SUCCESS; + + out: printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); @@ -3647,6 +3657,31 @@ _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc, } /** + * _scsih_temp_threshold_events - display temperature threshold exceeded events + * @ioc: per adapter object + * @event_data: the temp threshold event data + * Context: interrupt time. + * + * Return nothing. + */ +static void +_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataTemperature_t *event_data) +{ + if (ioc->temp_sensors_count >= event_data->SensorNum) { + printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s" + " exceeded for Sensor: %d !!!\n", ioc->name, + ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ", + ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ", + ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ", + ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ", + event_data->SensorNum); + printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n", + ioc->name, event_data->CurrentTemperature); + } +} + +/** * _scsih_flush_running_cmds - completing outstanding commands. * @ioc: per adapter object * @@ -4509,6 +4544,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) scmd->result = DID_TRANSPORT_DISRUPTED << 16; goto out; } + if (log_info == 0x32010081) { + scmd->result = DID_RESET << 16; + break; + } scmd->result = DID_SOFT_ERROR << 16; break; case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: @@ -7557,6 +7596,12 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, case MPI2_EVENT_IR_PHYSICAL_DISK: break; + case MPI2_EVENT_TEMP_THRESHOLD: + _scsih_temp_threshold_events(ioc, + (Mpi2EventDataTemperature_t *) + mpi_reply->EventData); + break; + default: /* ignore the rest */ return; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index e689bf20a3ea..ff2500ab9ba4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c * Copyright (C) 2007-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 20013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 1560115079c7..14a781b6b88d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -619,6 +620,9 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, case MPI2_EVENT_LOG_ENTRY_ADDED: desc = "Log Entry Added"; break; + case MPI2_EVENT_TEMP_THRESHOLD: + desc = "Temperature Threshold"; + break; } if (!desc) @@ -1580,6 +1584,8 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + irq_set_affinity_hint(reply_q->vector, NULL); + free_cpumask_var(reply_q->affinity_hint); synchronize_irq(reply_q->vector); free_irq(reply_q->vector, reply_q); kfree(reply_q); @@ -1609,6 +1615,11 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector) reply_q->ioc = ioc; reply_q->msix_index = index; reply_q->vector = vector; + + if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL)) + return -ENOMEM; + cpumask_clear(reply_q->affinity_hint); + atomic_set(&reply_q->busy, 0); if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", @@ -1643,6 +1654,7 @@ static void _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) { unsigned int cpu, nr_cpus, nr_msix, index = 0; + struct adapter_reply_queue *reply_q; if (!_base_is_controller_msix_enabled(ioc)) return; @@ -1657,20 +1669,30 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) cpu = cpumask_first(cpu_online_mask); - do { + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + unsigned int i, group = nr_cpus / nr_msix; + if (cpu >= nr_cpus) + break; + if (index < nr_cpus % nr_msix) group++; for (i = 0 ; i < group ; i++) { ioc->cpu_msix_table[cpu] = index; + cpumask_or(reply_q->affinity_hint, + reply_q->affinity_hint, get_cpu_mask(cpu)); cpu = cpumask_next(cpu, cpu_online_mask); } + if (irq_set_affinity_hint(reply_q->vector, + reply_q->affinity_hint)) + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "error setting affinity hint for irq vector %d\n", + ioc->name, reply_q->vector)); index++; - - } while (cpu < nr_cpus); + } } /** @@ -2500,6 +2522,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); _base_display_ioc_capabilities(ioc); /* @@ -2516,6 +2539,9 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + + if (ioc->iounit_pg8.NumSensors) + ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; } /** @@ -2659,8 +2685,14 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS) sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS; - else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) - sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS; + else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) { + sg_tablesize = min_t(unsigned short, sg_tablesize, + SCSI_MAX_SG_CHAIN_SEGMENTS); + pr_warn(MPT3SAS_FMT + "sg_tablesize(%u) is bigger than kernel" + " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name, + sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS); + } ioc->shost->sg_tablesize = sg_tablesize; ioc->hi_priority_depth = facts->HighPriorityCredit; @@ -3419,7 +3451,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, u16 smid; u32 ioc_state; unsigned long timeleft; - u8 issue_reset; + bool issue_reset = false; int rc; void *request; u16 wait_state_count; @@ -3483,7 +3515,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, _debug_dump_mf(mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)/4); if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) - issue_reset = 1; + issue_reset = true; goto issue_host_reset; } if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) @@ -3523,7 +3555,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, u16 smid; u32 ioc_state; unsigned long timeleft; - u8 issue_reset; + bool issue_reset = false; int rc; void *request; u16 wait_state_count; @@ -3581,7 +3613,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, _debug_dump_mf(mpi_request, sizeof(Mpi2SepRequest_t)/4); if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) - issue_reset = 1; + issue_reset = false; goto issue_host_reset; } if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) @@ -4720,6 +4752,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD); r = _base_make_ioc_operational(ioc, CAN_SLEEP); if (r) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 40926aa9b24d..afa881682bef 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -68,7 +69,7 @@ /* driver versioning info */ #define MPT3SAS_DRIVER_NAME "mpt3sas" -#define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" +#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" #define MPT3SAS_DRIVER_VERSION "04.100.00.00" #define MPT3SAS_MAJOR_VERSION 4 @@ -506,6 +507,7 @@ struct adapter_reply_queue { Mpi2ReplyDescriptorsUnion_t *reply_post_free; char name[MPT_NAME_LENGTH]; atomic_t busy; + cpumask_var_t affinity_hint; struct list_head list; }; @@ -659,6 +661,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @ioc_pg8: static ioc page 8 * @iounit_pg0: static iounit page 0 * @iounit_pg1: static iounit page 1 + * @iounit_pg8: static iounit page 8 * @sas_hba: sas host object * @sas_expander_list: expander object list * @sas_node_lock: @@ -728,6 +731,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @reply_post_host_index: head index in the pool where FW completes IO * @delayed_tr_list: target reset link list * @delayed_tr_volume_list: volume target reset link list + * @@temp_sensors_count: flag to carry the number of temperature sensors */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -834,6 +838,7 @@ struct MPT3SAS_ADAPTER { Mpi2IOCPage8_t ioc_pg8; Mpi2IOUnitPage0_t iounit_pg0; Mpi2IOUnitPage1_t iounit_pg1; + Mpi2IOUnitPage8_t iounit_pg8; struct _boot_device req_boot_device; struct _boot_device req_alt_boot_device; @@ -934,6 +939,7 @@ struct MPT3SAS_ADAPTER { struct list_head delayed_tr_list; struct list_head delayed_tr_volume_list; + u8 temp_sensors_count; /* diag buffer support */ u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; @@ -1082,6 +1088,8 @@ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage8_t *config_page); int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 4472c2af9255..e45c4613ef0c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -871,6 +872,42 @@ mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, } /** + * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 8; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index dca14877d5ab..080c8a76d23d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index 5f3d7fd7c2f8..aee99ce67e54 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h index 4778e7dd98bd..4e8a63fdb304 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_debug.h +++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 94261ee9e72d..5a97e3286719 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -2392,9 +2393,17 @@ _scsih_host_reset(struct scsi_cmnd *scmd) ioc->name, scmd); scsi_print_command(scmd); + if (ioc->is_driver_loading) { + pr_info(MPT3SAS_FMT "Blocking the host reset\n", + ioc->name); + r = FAILED; + goto out; + } + retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); r = (retval < 0) ? FAILED : SUCCESS; +out: pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n", ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); @@ -3342,6 +3351,31 @@ _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc, } /** + * _scsih_temp_threshold_events - display temperature threshold exceeded events + * @ioc: per adapter object + * @event_data: the temp threshold event data + * Context: interrupt time. + * + * Return nothing. + */ +static void +_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataTemperature_t *event_data) +{ + if (ioc->temp_sensors_count >= event_data->SensorNum) { + pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s" + " exceeded for Sensor: %d !!!\n", ioc->name, + ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ", + ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ", + ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ", + ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ", + event_data->SensorNum); + pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n", + ioc->name, event_data->CurrentTemperature); + } +} + +/** * _scsih_flush_running_cmds - completing outstanding commands. * @ioc: per adapter object * @@ -7194,6 +7228,12 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, case MPI2_EVENT_IR_PHYSICAL_DISK: break; + case MPI2_EVENT_TEMP_THRESHOLD: + _scsih_temp_threshold_events(ioc, + (Mpi2EventDataTemperature_t *) + mpi_reply->EventData); + break; + default: /* ignore the rest */ return 1; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 3637ae6c0171..efb98afc46e0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -3,7 +3,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c index 8a2dd113f401..b60fd7a3b571 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c @@ -4,7 +4,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h index f681db56c53b..6586a463bea9 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h @@ -5,7 +5,8 @@ * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h * Copyright (C) 2012-2014 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 90abb03c9074..c6077cefbeca 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -1441,8 +1441,6 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id) return IRQ_RETVAL(handled); } -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m, ##args) static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host) { @@ -1458,64 +1456,63 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host) data = (nsp32_hw_data *)host->hostdata; base = host->io_port; - SPRINTF("NinjaSCSI-32 status\n\n"); - SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version); - SPRINTF("SCSI host No.: %d\n", hostno); - SPRINTF("IRQ: %d\n", host->irq); - SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); - SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); - SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); - SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff); + seq_puts(m, "NinjaSCSI-32 status\n\n"); + seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version); + seq_printf(m, "SCSI host No.: %d\n", hostno); + seq_printf(m, "IRQ: %d\n", host->irq); + seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); + seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); + seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize); + seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff); mode_reg = nsp32_index_read1(base, CHIP_MODE); model = data->pci_devid->driver_data; #ifdef CONFIG_PM - SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no"); + seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no"); #endif - SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]); + seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]); spin_lock_irqsave(&(data->Lock), flags); - SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); + seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC); spin_unlock_irqrestore(&(data->Lock), flags); - SPRINTF("SDTR status\n"); + seq_puts(m, "SDTR status\n"); for (id = 0; id < ARRAY_SIZE(data->target); id++) { - SPRINTF("id %d: ", id); + seq_printf(m, "id %d: ", id); if (id == host->this_id) { - SPRINTF("----- NinjaSCSI-32 host adapter\n"); + seq_puts(m, "----- NinjaSCSI-32 host adapter\n"); continue; } if (data->target[id].sync_flag == SDTR_DONE) { if (data->target[id].period == 0 && data->target[id].offset == ASYNC_OFFSET ) { - SPRINTF("async"); + seq_puts(m, "async"); } else { - SPRINTF(" sync"); + seq_puts(m, " sync"); } } else { - SPRINTF(" none"); + seq_puts(m, " none"); } if (data->target[id].period != 0) { speed = 1000000 / (data->target[id].period * 4); - SPRINTF(" transfer %d.%dMB/s, offset %d", + seq_printf(m, " transfer %d.%dMB/s, offset %d", speed / 1000, speed % 1000, data->target[id].offset ); } - SPRINTF("\n"); + seq_putc(m, '\n'); } return 0; } -#undef SPRINTF diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 34aad32829f5..1b6c8833a304 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1364,9 +1364,6 @@ static const char *nsp_info(struct Scsi_Host *shpnt) return data->nspinfo; } -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m, ##args) - static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host) { int id; @@ -1378,75 +1375,74 @@ static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host) hostno = host->host_no; data = (nsp_hw_data *)host->hostdata; - SPRINTF("NinjaSCSI status\n\n"); - SPRINTF("Driver version: $Revision: 1.23 $\n"); - SPRINTF("SCSI host No.: %d\n", hostno); - SPRINTF("IRQ: %d\n", host->irq); - SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); - SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); - SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); + seq_puts(m, "NinjaSCSI status\n\n" + "Driver version: $Revision: 1.23 $\n"); + seq_printf(m, "SCSI host No.: %d\n", hostno); + seq_printf(m, "IRQ: %d\n", host->irq); + seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); + seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); + seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize); - SPRINTF("burst transfer mode: "); + seq_puts(m, "burst transfer mode: "); switch (nsp_burst_mode) { case BURST_IO8: - SPRINTF("io8"); + seq_puts(m, "io8"); break; case BURST_IO32: - SPRINTF("io32"); + seq_puts(m, "io32"); break; case BURST_MEM32: - SPRINTF("mem32"); + seq_puts(m, "mem32"); break; default: - SPRINTF("???"); + seq_puts(m, "???"); break; } - SPRINTF("\n"); + seq_putc(m, '\n'); spin_lock_irqsave(&(data->Lock), flags); - SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); + seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC); spin_unlock_irqrestore(&(data->Lock), flags); - SPRINTF("SDTR status\n"); + seq_puts(m, "SDTR status\n"); for(id = 0; id < ARRAY_SIZE(data->Sync); id++) { - SPRINTF("id %d: ", id); + seq_printf(m, "id %d: ", id); if (id == host->this_id) { - SPRINTF("----- NinjaSCSI-3 host adapter\n"); + seq_puts(m, "----- NinjaSCSI-3 host adapter\n"); continue; } switch(data->Sync[id].SyncNegotiation) { case SYNC_OK: - SPRINTF(" sync"); + seq_puts(m, " sync"); break; case SYNC_NG: - SPRINTF("async"); + seq_puts(m, "async"); break; case SYNC_NOT_YET: - SPRINTF(" none"); + seq_puts(m, " none"); break; default: - SPRINTF("?????"); + seq_puts(m, "?????"); break; } if (data->Sync[id].SyncPeriod != 0) { speed = 1000000 / (data->Sync[id].SyncPeriod * 4); - SPRINTF(" transfer %d.%dMB/s, offset %d", + seq_printf(m, " transfer %d.%dMB/s, offset %d", speed / 1000, speed % 1000, data->Sync[id].SyncOffset ); } - SPRINTF("\n"); + seq_putc(m, '\n'); } return 0; } -#undef SPRINTF /*---------------------------------------------------------------*/ /* error handler */ diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c index 2ca39b8e7166..15cf074ffa3c 100644 --- a/drivers/scsi/qla2xxx/qla_dfs.c +++ b/drivers/scsi/qla2xxx/qla_dfs.c @@ -23,10 +23,10 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused) mutex_lock(&ha->fce_mutex); - seq_printf(s, "FCE Trace Buffer\n"); + seq_puts(s, "FCE Trace Buffer\n"); seq_printf(s, "In Pointer = %llx\n\n", (unsigned long long)ha->fce_wr); seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma); - seq_printf(s, "FCE Enable Registers\n"); + seq_puts(s, "FCE Enable Registers\n"); seq_printf(s, "%08x %08x %08x %08x %08x %08x\n", ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4], ha->fce_mb[5], ha->fce_mb[6]); @@ -38,11 +38,11 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused) seq_printf(s, "\n%llx: ", (unsigned long long)((cnt * 4) + fce_start)); else - seq_printf(s, " "); + seq_putc(s, ' '); seq_printf(s, "%08x", *fce++); } - seq_printf(s, "\nEnd\n"); + seq_puts(s, "\nEnd\n"); mutex_unlock(&ha->fce_mutex); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 9b3829931f40..c9c3b579eece 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -531,7 +531,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) * * 3: same as 2 * - * 4: same as 3 plus dump extra junk + * 4: same as 3 */ if (unlikely(scsi_logging_level)) { level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT, @@ -540,13 +540,6 @@ void scsi_log_send(struct scsi_cmnd *cmd) scmd_printk(KERN_INFO, cmd, "Send: scmd 0x%p\n", cmd); scsi_print_command(cmd); - if (level > 3) { - printk(KERN_INFO "buffer = 0x%p, bufflen = %d," - " queuecommand 0x%p\n", - scsi_sglist(cmd), scsi_bufflen(cmd), - cmd->device->host->hostt->queuecommand); - - } } } } @@ -572,7 +565,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) SCSI_LOG_MLCOMPLETE_BITS); if (((level > 0) && (cmd->result || disposition != SUCCESS)) || (level > 1)) { - scsi_print_result(cmd, "Done: ", disposition); + scsi_print_result(cmd, "Done", disposition); scsi_print_command(cmd); if (status_byte(cmd->result) & CHECK_CONDITION) scsi_print_sense(cmd); diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 4aca1b0378c2..113232135d27 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -80,6 +80,8 @@ static const char *scsi_debug_version_date = "20141022"; #define INVALID_FIELD_IN_PARAM_LIST 0x26 #define UA_RESET_ASC 0x29 #define UA_CHANGED_ASC 0x2a +#define TARGET_CHANGED_ASC 0x3f +#define LUNS_CHANGED_ASCQ 0x0e #define INSUFF_RES_ASC 0x55 #define INSUFF_RES_ASCQ 0x3 #define POWER_ON_RESET_ASCQ 0x0 @@ -91,6 +93,8 @@ static const char *scsi_debug_version_date = "20141022"; #define THRESHOLD_EXCEEDED 0x5d #define LOW_POWER_COND_ON 0x5e #define MISCOMPARE_VERIFY_ASC 0x1d +#define MICROCODE_CHANGED_ASCQ 0x1 /* with TARGET_CHANGED_ASC */ +#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16 /* Additional Sense Code Qualifier (ASCQ) */ #define ACK_NAK_TO 0x3 @@ -180,7 +184,10 @@ static const char *scsi_debug_version_date = "20141022"; #define SDEBUG_UA_BUS_RESET 1 #define SDEBUG_UA_MODE_CHANGED 2 #define SDEBUG_UA_CAPACITY_CHANGED 3 -#define SDEBUG_NUM_UAS 4 +#define SDEBUG_UA_LUNS_CHANGED 4 +#define SDEBUG_UA_MICROCODE_CHANGED 5 /* simulate firmware change */ +#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6 +#define SDEBUG_NUM_UAS 7 /* for check_readiness() */ #define UAS_ONLY 1 /* check for UAs only */ @@ -326,6 +333,7 @@ static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *); +static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *); struct opcode_info_t { u8 num_attached; /* 0 if this is it (i.e. a leaf); use 0xff @@ -480,8 +488,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = { {0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10, NULL, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} }, - {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, + {0, 0x3b, 0, F_D_OUT_MAYBE, resp_write_buffer, NULL, + {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, + 0, 0, 0, 0} }, /* WRITE_BUFFER */ {1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10, write_same_iarr, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} }, @@ -782,6 +791,22 @@ static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg) /* return -ENOTTY; // correct return but upsets fdisk */ } +static void clear_luns_changed_on_target(struct sdebug_dev_info *devip) +{ + struct sdebug_host_info *sdhp; + struct sdebug_dev_info *dp; + + spin_lock(&sdebug_host_list_lock); + list_for_each_entry(sdhp, &sdebug_host_list, host_list) { + list_for_each_entry(dp, &sdhp->dev_info_list, dev_list) { + if ((devip->sdbg_host == dp->sdbg_host) && + (devip->target == dp->target)) + clear_bit(SDEBUG_UA_LUNS_CHANGED, dp->uas_bm); + } + } + spin_unlock(&sdebug_host_list_lock); +} + static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only, struct sdebug_dev_info * devip) { @@ -817,6 +842,36 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only, if (debug) cp = "capacity data changed"; break; + case SDEBUG_UA_MICROCODE_CHANGED: + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, MICROCODE_CHANGED_ASCQ); + if (debug) + cp = "microcode has been changed"; + break; + case SDEBUG_UA_MICROCODE_CHANGED_WO_RESET: + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, + MICROCODE_CHANGED_WO_RESET_ASCQ); + if (debug) + cp = "microcode has been changed without reset"; + break; + case SDEBUG_UA_LUNS_CHANGED: + /* + * SPC-3 behavior is to report a UNIT ATTENTION with + * ASC/ASCQ REPORTED LUNS DATA HAS CHANGED on every LUN + * on the target, until a REPORT LUNS command is + * received. SPC-4 behavior is to report it only once. + * NOTE: scsi_debug_scsi_level does not use the same + * values as struct scsi_device->scsi_level. + */ + if (scsi_debug_scsi_level >= 6) /* SPC-4 and above */ + clear_luns_changed_on_target(devip); + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, + LUNS_CHANGED_ASCQ); + if (debug) + cp = "reported luns data has changed"; + break; default: pr_warn("%s: unexpected unit attention code=%d\n", __func__, k); @@ -3033,6 +3088,55 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) return resp_write_same(scp, lba, num, ei_lba, unmap, ndob); } +/* Note the mode field is in the same position as the (lower) service action + * field. For the Report supported operation codes command, SPC-4 suggests + * each mode of this command should be reported separately; for future. */ +static int +resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) +{ + u8 *cmd = scp->cmnd; + struct scsi_device *sdp = scp->device; + struct sdebug_dev_info *dp; + u8 mode; + + mode = cmd[1] & 0x1f; + switch (mode) { + case 0x4: /* download microcode (MC) and activate (ACT) */ + /* set UAs on this device only */ + set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm); + set_bit(SDEBUG_UA_MICROCODE_CHANGED, devip->uas_bm); + break; + case 0x5: /* download MC, save and ACT */ + set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, devip->uas_bm); + break; + case 0x6: /* download MC with offsets and ACT */ + /* set UAs on most devices (LUs) in this target */ + list_for_each_entry(dp, + &devip->sdbg_host->dev_info_list, + dev_list) + if (dp->target == sdp->id) { + set_bit(SDEBUG_UA_BUS_RESET, dp->uas_bm); + if (devip != dp) + set_bit(SDEBUG_UA_MICROCODE_CHANGED, + dp->uas_bm); + } + break; + case 0x7: /* download MC with offsets, save, and ACT */ + /* set UA on all devices (LUs) in this target */ + list_for_each_entry(dp, + &devip->sdbg_host->dev_info_list, + dev_list) + if (dp->target == sdp->id) + set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, + dp->uas_bm); + break; + default: + /* do nothing for this command for other mode values */ + break; + } + return 0; +} + static int resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) { @@ -3229,6 +3333,7 @@ static int resp_report_luns(struct scsi_cmnd * scp, unsigned char arr[SDEBUG_RLUN_ARR_SZ]; unsigned char * max_addr; + clear_luns_changed_on_target(devip); alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24); shortish = (alloc_len < 4); if (shortish || (select_report > 2)) { @@ -4369,10 +4474,27 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf, size_t count) { int n; + bool changed; if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + changed = (scsi_debug_max_luns != n); scsi_debug_max_luns = n; sdebug_max_tgts_luns(); + if (changed && (scsi_debug_scsi_level >= 5)) { /* >= SPC-3 */ + struct sdebug_host_info *sdhp; + struct sdebug_dev_info *dp; + + spin_lock(&sdebug_host_list_lock); + list_for_each_entry(sdhp, &sdebug_host_list, + host_list) { + list_for_each_entry(dp, &sdhp->dev_info_list, + dev_list) { + set_bit(SDEBUG_UA_LUNS_CHANGED, + dp->uas_bm); + } + } + spin_unlock(&sdebug_host_list_lock); + } return count; } return -EINVAL; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 8afb01604d51..4cdaffca17fc 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -124,41 +124,37 @@ scmd_eh_abort_handler(struct work_struct *work) if (scsi_host_eh_past_deadline(sdev->host)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "scmd %p eh timeout, not aborting\n", - scmd)); + "eh timeout, not aborting\n")); } else { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "aborting command %p\n", scmd)); + "aborting command\n")); rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd); if (rtn == SUCCESS) { set_host_byte(scmd, DID_TIME_OUT); if (scsi_host_eh_past_deadline(sdev->host)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "scmd %p eh timeout, " - "not retrying aborted " - "command\n", scmd)); + "eh timeout, not retrying " + "aborted command\n")); } else if (!scsi_noretry_cmd(scmd) && (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_WARNING, scmd, - "scmd %p retry " - "aborted command\n", scmd)); + "retry aborted command\n")); scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY); return; } else { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_WARNING, scmd, - "scmd %p finish " - "aborted command\n", scmd)); + "finish aborted command\n")); scsi_finish_command(scmd); return; } } else { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "scmd %p abort %s\n", scmd, + "cmd abort %s\n", (rtn == FAST_IO_FAIL) ? "not send" : "failed")); } @@ -167,8 +163,7 @@ scmd_eh_abort_handler(struct work_struct *work) if (!scsi_eh_scmd_add(scmd, 0)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_WARNING, scmd, - "scmd %p terminate " - "aborted command\n", scmd)); + "terminate aborted command\n")); set_host_byte(scmd, DID_TIME_OUT); scsi_finish_command(scmd); } @@ -194,7 +189,7 @@ scsi_abort_command(struct scsi_cmnd *scmd) scmd->eh_eflags &= ~SCSI_EH_ABORT_SCHEDULED; SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "scmd %p previous abort failed\n", scmd)); + "previous abort failed\n")); BUG_ON(delayed_work_pending(&scmd->abort_work)); return FAILED; } @@ -208,8 +203,7 @@ scsi_abort_command(struct scsi_cmnd *scmd) spin_unlock_irqrestore(shost->host_lock, flags); SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "scmd %p not aborting, host in recovery\n", - scmd)); + "not aborting, host in recovery\n")); return FAILED; } @@ -219,8 +213,7 @@ scsi_abort_command(struct scsi_cmnd *scmd) scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED; SCSI_LOG_ERROR_RECOVERY(3, - scmd_printk(KERN_INFO, scmd, - "scmd %p abort scheduled\n", scmd)); + scmd_printk(KERN_INFO, scmd, "abort scheduled\n")); queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100); return SUCCESS; } @@ -737,8 +730,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) struct completion *eh_action; SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "%s scmd: %p result: %x\n", - __func__, scmd, scmd->result)); + "%s result: %x\n", __func__, scmd->result)); eh_action = scmd->device->host->eh_action; if (eh_action) @@ -868,6 +860,7 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) /** * scsi_try_to_abort_cmd - Ask host to abort a SCSI command + * @hostt: SCSI driver host template * @scmd: SCSI cmd used to send a target reset * * Return value: @@ -1052,8 +1045,8 @@ retry: scsi_log_completion(scmd, rtn); SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "%s: scmd: %p, timeleft: %ld\n", - __func__, scmd, timeleft)); + "%s timeleft: %ld\n", + __func__, timeleft)); /* * If there is time left scsi_eh_done got called, and we will examine @@ -1192,8 +1185,7 @@ int scsi_eh_get_sense(struct list_head *work_q, continue; SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "sense requested for %p result %x\n", - scmd, scmd->result)); + "sense requested, result %x\n", scmd->result)); SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd)); rtn = scsi_decide_disposition(scmd); @@ -1235,7 +1227,7 @@ retry_tur: scmd->device->eh_timeout, 0); SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "%s: scmd %p rtn %x\n", __func__, scmd, rtn)); + "%s return: %x\n", __func__, rtn)); switch (rtn) { case NEEDS_RETRY: @@ -2092,8 +2084,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q) (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "%s: flush retry cmd: %p\n", - current->comm, scmd)); + "%s: flush retry cmd\n", + current->comm)); scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY); } else { /* @@ -2105,8 +2097,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q) scmd->result |= (DRIVER_TIMEOUT << 24); SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, - "%s: flush finish cmd: %p\n", - current->comm, scmd)); + "%s: flush finish cmd\n", + current->comm)); scsi_finish_command(scmd); } } diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c new file mode 100644 index 000000000000..bd70339c1242 --- /dev/null +++ b/drivers/scsi/scsi_logging.c @@ -0,0 +1,485 @@ +/* + * scsi_logging.c + * + * Copyright (C) 2014 SUSE Linux Products GmbH + * Copyright (C) 2014 Hannes Reinecke <hare@suse.de> + * + * This file is released under the GPLv2 + */ + +#include <linux/kernel.h> +#include <linux/atomic.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_dbg.h> + +#define SCSI_LOG_SPOOLSIZE 4096 + +#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG +#warning SCSI logging bitmask too large +#endif + +struct scsi_log_buf { + char buffer[SCSI_LOG_SPOOLSIZE]; + unsigned long map; +}; + +static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log); + +static char *scsi_log_reserve_buffer(size_t *len) +{ + struct scsi_log_buf *buf; + unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE; + unsigned long idx = 0; + + preempt_disable(); + buf = this_cpu_ptr(&scsi_format_log); + idx = find_first_zero_bit(&buf->map, map_bits); + if (likely(idx < map_bits)) { + while (test_and_set_bit(idx, &buf->map)) { + idx = find_next_zero_bit(&buf->map, map_bits, idx); + if (idx >= map_bits) + break; + } + } + if (WARN_ON(idx >= map_bits)) { + preempt_enable(); + return NULL; + } + *len = SCSI_LOG_BUFSIZE; + return buf->buffer + idx * SCSI_LOG_BUFSIZE; +} + +static void scsi_log_release_buffer(char *bufptr) +{ + struct scsi_log_buf *buf; + unsigned long idx; + int ret; + + buf = this_cpu_ptr(&scsi_format_log); + if (bufptr >= buf->buffer && + bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) { + idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE; + ret = test_and_clear_bit(idx, &buf->map); + WARN_ON(!ret); + } + preempt_enable(); +} + +static inline const char *scmd_name(const struct scsi_cmnd *scmd) +{ + return scmd->request->rq_disk ? + scmd->request->rq_disk->disk_name : NULL; +} + +static size_t sdev_format_header(char *logbuf, size_t logbuf_len, + const char *name, int tag) +{ + size_t off = 0; + + if (name) + off += scnprintf(logbuf + off, logbuf_len - off, + "[%s] ", name); + + if (WARN_ON(off >= logbuf_len)) + return off; + + if (tag >= 0) + off += scnprintf(logbuf + off, logbuf_len - off, + "tag#%d ", tag); + return off; +} + +void sdev_prefix_printk(const char *level, const struct scsi_device *sdev, + const char *name, const char *fmt, ...) +{ + va_list args; + char *logbuf; + size_t off = 0, logbuf_len; + + if (!sdev) + return; + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + + if (name) + off += scnprintf(logbuf + off, logbuf_len - off, + "[%s] ", name); + if (!WARN_ON(off >= logbuf_len)) { + va_start(args, fmt); + off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args); + va_end(args); + } + dev_printk(level, &sdev->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); +} +EXPORT_SYMBOL(sdev_prefix_printk); + +void scmd_printk(const char *level, const struct scsi_cmnd *scmd, + const char *fmt, ...) +{ + va_list args; + char *logbuf; + size_t off = 0, logbuf_len; + + if (!scmd || !scmd->cmnd) + return; + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + off = sdev_format_header(logbuf, logbuf_len, scmd_name(scmd), + scmd->request->tag); + if (off < logbuf_len) { + va_start(args, fmt); + off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args); + va_end(args); + } + dev_printk(level, &scmd->device->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); +} +EXPORT_SYMBOL(scmd_printk); + +static size_t scsi_format_opcode_name(char *buffer, size_t buf_len, + const unsigned char *cdbp) +{ + int sa, cdb0; + const char *cdb_name = NULL, *sa_name = NULL; + size_t off; + + cdb0 = cdbp[0]; + if (cdb0 == VARIABLE_LENGTH_CMD) { + int len = scsi_varlen_cdb_length(cdbp); + + if (len < 10) { + off = scnprintf(buffer, buf_len, + "short variable length command, len=%d", + len); + return off; + } + sa = (cdbp[8] << 8) + cdbp[9]; + } else + sa = cdbp[1] & 0x1f; + + if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) { + if (cdb_name) + off = scnprintf(buffer, buf_len, "%s", cdb_name); + else { + off = scnprintf(buffer, buf_len, "opcode=0x%x", cdb0); + if (WARN_ON(off >= buf_len)) + return off; + if (cdb0 >= VENDOR_SPECIFIC_CDB) + off += scnprintf(buffer + off, buf_len - off, + " (vendor)"); + else if (cdb0 >= 0x60 && cdb0 < 0x7e) + off += scnprintf(buffer + off, buf_len - off, + " (reserved)"); + } + } else { + if (sa_name) + off = scnprintf(buffer, buf_len, "%s", sa_name); + else if (cdb_name) + off = scnprintf(buffer, buf_len, "%s, sa=0x%x", + cdb_name, sa); + else + off = scnprintf(buffer, buf_len, + "opcode=0x%x, sa=0x%x", cdb0, sa); + } + WARN_ON(off >= buf_len); + return off; +} + +size_t __scsi_format_command(char *logbuf, size_t logbuf_len, + const unsigned char *cdb, size_t cdb_len) +{ + int len, k; + size_t off; + + off = scsi_format_opcode_name(logbuf, logbuf_len, cdb); + if (off >= logbuf_len) + return off; + len = scsi_command_size(cdb); + if (cdb_len < len) + len = cdb_len; + /* print out all bytes in cdb */ + for (k = 0; k < len; ++k) { + if (off > logbuf_len - 3) + break; + off += scnprintf(logbuf + off, logbuf_len - off, + " %02x", cdb[k]); + } + return off; +} +EXPORT_SYMBOL(__scsi_format_command); + +void scsi_print_command(struct scsi_cmnd *cmd) +{ + int k; + char *logbuf; + size_t off, logbuf_len; + + if (!cmd->cmnd) + return; + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + + off = sdev_format_header(logbuf, logbuf_len, + scmd_name(cmd), cmd->request->tag); + if (off >= logbuf_len) + goto out_printk; + off += scnprintf(logbuf + off, logbuf_len - off, "CDB: "); + if (WARN_ON(off >= logbuf_len)) + goto out_printk; + + off += scsi_format_opcode_name(logbuf + off, logbuf_len - off, + cmd->cmnd); + if (off >= logbuf_len) + goto out_printk; + + /* print out all bytes in cdb */ + if (cmd->cmd_len > 16) { + /* Print opcode in one line and use separate lines for CDB */ + off += scnprintf(logbuf + off, logbuf_len - off, "\n"); + dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); + for (k = 0; k < cmd->cmd_len; k += 16) { + size_t linelen = min(cmd->cmd_len - k, 16); + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + break; + off = sdev_format_header(logbuf, logbuf_len, + scmd_name(cmd), + cmd->request->tag); + if (!WARN_ON(off > logbuf_len - 58)) { + off += scnprintf(logbuf + off, logbuf_len - off, + "CDB[%02x]: ", k); + hex_dump_to_buffer(&cmd->cmnd[k], linelen, + 16, 1, logbuf + off, + logbuf_len - off, false); + } + dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", + logbuf); + scsi_log_release_buffer(logbuf); + } + return; + } + if (!WARN_ON(off > logbuf_len - 49)) { + off += scnprintf(logbuf + off, logbuf_len - off, " "); + hex_dump_to_buffer(cmd->cmnd, cmd->cmd_len, 16, 1, + logbuf + off, logbuf_len - off, + false); + } +out_printk: + dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); +} +EXPORT_SYMBOL(scsi_print_command); + +static size_t +scsi_format_extd_sense(char *buffer, size_t buf_len, + unsigned char asc, unsigned char ascq) +{ + size_t off = 0; + const char *extd_sense_fmt = NULL; + const char *extd_sense_str = scsi_extd_sense_format(asc, ascq, + &extd_sense_fmt); + + if (extd_sense_str) { + off = scnprintf(buffer, buf_len, "Add. Sense: %s", + extd_sense_str); + if (extd_sense_fmt) + off += scnprintf(buffer + off, buf_len - off, + "(%s%x)", extd_sense_fmt, ascq); + } else { + if (asc >= 0x80) + off = scnprintf(buffer, buf_len, "<<vendor>>"); + off += scnprintf(buffer + off, buf_len - off, + "ASC=0x%x ", asc); + if (ascq >= 0x80) + off += scnprintf(buffer + off, buf_len - off, + "<<vendor>>"); + off += scnprintf(buffer + off, buf_len - off, + "ASCQ=0x%x ", ascq); + } + return off; +} + +static size_t +scsi_format_sense_hdr(char *buffer, size_t buf_len, + const struct scsi_sense_hdr *sshdr) +{ + const char *sense_txt; + size_t off; + + off = scnprintf(buffer, buf_len, "Sense Key : "); + sense_txt = scsi_sense_key_string(sshdr->sense_key); + if (sense_txt) + off += scnprintf(buffer + off, buf_len - off, + "%s ", sense_txt); + else + off += scnprintf(buffer + off, buf_len - off, + "0x%x ", sshdr->sense_key); + off += scnprintf(buffer + off, buf_len - off, + scsi_sense_is_deferred(sshdr) ? "[deferred] " : "[current] "); + + if (sshdr->response_code >= 0x72) + off += scnprintf(buffer + off, buf_len - off, "[descriptor] "); + return off; +} + +static void +scsi_log_dump_sense(const struct scsi_device *sdev, const char *name, int tag, + const unsigned char *sense_buffer, int sense_len) +{ + char *logbuf; + size_t logbuf_len; + int i; + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + + for (i = 0; i < sense_len; i += 16) { + int len = min(sense_len - i, 16); + size_t off; + + off = sdev_format_header(logbuf, logbuf_len, + name, tag); + hex_dump_to_buffer(&sense_buffer[i], len, 16, 1, + logbuf + off, logbuf_len - off, + false); + dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf); + } + scsi_log_release_buffer(logbuf); +} + +static void +scsi_log_print_sense_hdr(const struct scsi_device *sdev, const char *name, + int tag, const struct scsi_sense_hdr *sshdr) +{ + char *logbuf; + size_t off, logbuf_len; + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + off = sdev_format_header(logbuf, logbuf_len, name, tag); + off += scsi_format_sense_hdr(logbuf + off, logbuf_len - off, sshdr); + dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + off = sdev_format_header(logbuf, logbuf_len, name, tag); + off += scsi_format_extd_sense(logbuf + off, logbuf_len - off, + sshdr->asc, sshdr->ascq); + dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); +} + +static void +scsi_log_print_sense(const struct scsi_device *sdev, const char *name, int tag, + const unsigned char *sense_buffer, int sense_len) +{ + struct scsi_sense_hdr sshdr; + + if (scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) + scsi_log_print_sense_hdr(sdev, name, tag, &sshdr); + else + scsi_log_dump_sense(sdev, name, tag, sense_buffer, sense_len); +} + +/* + * Print normalized SCSI sense header with a prefix. + */ +void +scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name, + const struct scsi_sense_hdr *sshdr) +{ + scsi_log_print_sense_hdr(sdev, name, -1, sshdr); +} +EXPORT_SYMBOL(scsi_print_sense_hdr); + +/* Normalize and print sense buffer with name prefix */ +void __scsi_print_sense(const struct scsi_device *sdev, const char *name, + const unsigned char *sense_buffer, int sense_len) +{ + scsi_log_print_sense(sdev, name, -1, sense_buffer, sense_len); +} +EXPORT_SYMBOL(__scsi_print_sense); + +/* Normalize and print sense buffer in SCSI command */ +void scsi_print_sense(const struct scsi_cmnd *cmd) +{ + scsi_log_print_sense(cmd->device, scmd_name(cmd), cmd->request->tag, + cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); +} +EXPORT_SYMBOL(scsi_print_sense); + +void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg, + int disposition) +{ + char *logbuf; + size_t off, logbuf_len; + const char *mlret_string = scsi_mlreturn_string(disposition); + const char *hb_string = scsi_hostbyte_string(cmd->result); + const char *db_string = scsi_driverbyte_string(cmd->result); + + logbuf = scsi_log_reserve_buffer(&logbuf_len); + if (!logbuf) + return; + + off = sdev_format_header(logbuf, logbuf_len, + scmd_name(cmd), cmd->request->tag); + + if (off >= logbuf_len) + goto out_printk; + + if (msg) { + off += scnprintf(logbuf + off, logbuf_len - off, + "%s: ", msg); + if (WARN_ON(off >= logbuf_len)) + goto out_printk; + } + if (mlret_string) + off += scnprintf(logbuf + off, logbuf_len - off, + "%s ", mlret_string); + else + off += scnprintf(logbuf + off, logbuf_len - off, + "UNKNOWN(0x%02x) ", disposition); + if (WARN_ON(off >= logbuf_len)) + goto out_printk; + + off += scnprintf(logbuf + off, logbuf_len - off, "Result: "); + if (WARN_ON(off >= logbuf_len)) + goto out_printk; + + if (hb_string) + off += scnprintf(logbuf + off, logbuf_len - off, + "hostbyte=%s ", hb_string); + else + off += scnprintf(logbuf + off, logbuf_len - off, + "hostbyte=0x%02x ", host_byte(cmd->result)); + if (WARN_ON(off >= logbuf_len)) + goto out_printk; + + if (db_string) + off += scnprintf(logbuf + off, logbuf_len - off, + "driverbyte=%s", db_string); + else + off += scnprintf(logbuf + off, logbuf_len - off, + "driverbyte=0x%02x", driver_byte(cmd->result)); +out_printk: + dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf); + scsi_log_release_buffer(logbuf); +} +EXPORT_SYMBOL(scsi_print_result); diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index 6fcefa2da503..251598eb3547 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -189,36 +189,36 @@ static int proc_print_scsidevice(struct device *dev, void *data) sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); for (i = 0; i < 8; i++) { if (sdev->vendor[i] >= 0x20) - seq_printf(s, "%c", sdev->vendor[i]); + seq_putc(s, sdev->vendor[i]); else - seq_printf(s, " "); + seq_putc(s, ' '); } - seq_printf(s, " Model: "); + seq_puts(s, " Model: "); for (i = 0; i < 16; i++) { if (sdev->model[i] >= 0x20) - seq_printf(s, "%c", sdev->model[i]); + seq_putc(s, sdev->model[i]); else - seq_printf(s, " "); + seq_putc(s, ' '); } - seq_printf(s, " Rev: "); + seq_puts(s, " Rev: "); for (i = 0; i < 4; i++) { if (sdev->rev[i] >= 0x20) - seq_printf(s, "%c", sdev->rev[i]); + seq_putc(s, sdev->rev[i]); else - seq_printf(s, " "); + seq_putc(s, ' '); } - seq_printf(s, "\n"); + seq_putc(s, '\n'); seq_printf(s, " Type: %s ", scsi_device_type(sdev->type)); seq_printf(s, " ANSI SCSI revision: %02x", sdev->scsi_level - (sdev->scsi_level > 1)); if (sdev->scsi_level == 2) - seq_printf(s, " CCS\n"); + seq_puts(s, " CCS\n"); else - seq_printf(s, "\n"); + seq_putc(s, '\n'); out: return 0; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 983aed10ff2f..0deb385ad4d6 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -34,6 +34,7 @@ #include <linux/spinlock.h> #include <linux/async.h> #include <linux/slab.h> +#include <asm/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -98,20 +99,6 @@ char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT; module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO); MODULE_PARM_DESC(scan, "sync, async or none"); -/* - * max_scsi_report_luns: the maximum number of LUNS that will be - * returned from the REPORT LUNS command. 8 times this value must - * be allocated. In theory this could be up to an 8 byte value, but - * in practice, the maximum number of LUNs suppored by any device - * is about 16k. - */ -static unsigned int max_scsi_report_luns = 511; - -module_param_named(max_report_luns, max_scsi_report_luns, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(max_report_luns, - "REPORT LUNS maximum number of LUNS received (should be" - " between 1 and 16384)"); - static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18; module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR); @@ -1367,7 +1354,6 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, unsigned int retries; int result; struct scsi_lun *lunp, *lun_data; - u8 *data; struct scsi_sense_hdr sshdr; struct scsi_device *sdev; struct Scsi_Host *shost = dev_to_shost(&starget->dev); @@ -1407,16 +1393,12 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, /* * Allocate enough to hold the header (the same size as one scsi_lun) - * plus the max number of luns we are requesting. - * - * Reallocating and trying again (with the exact amount we need) - * would be nice, but then we need to somehow limit the size - * allocated based on the available memory and the limits of - * kmalloc - we don't want a kmalloc() failure of a huge value to - * prevent us from finding any LUNs on this target. + * plus the number of luns we are requesting. 511 was the default + * value of the now removed max_report_luns parameter. */ - length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun); - lun_data = kmalloc(length, GFP_ATOMIC | + length = (511 + 1) * sizeof(struct scsi_lun); +retry: + lun_data = kmalloc(length, GFP_KERNEL | (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0)); if (!lun_data) { printk(ALLOC_FAILURE_MSG, __func__); @@ -1433,10 +1415,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, /* * bytes 6 - 9: length of the command. */ - scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff; - scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff; - scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff; - scsi_cmd[9] = (unsigned char) length & 0xff; + put_unaligned_be32(length, &scsi_cmd[6]); scsi_cmd[10] = 0; /* reserved */ scsi_cmd[11] = 0; /* control */ @@ -1484,19 +1463,16 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, /* * Get the length from the first four bytes of lun_data. */ - data = (u8 *) lun_data->scsi_lun; - length = ((data[0] << 24) | (data[1] << 16) | - (data[2] << 8) | (data[3] << 0)); + if (get_unaligned_be32(lun_data->scsi_lun) + + sizeof(struct scsi_lun) > length) { + length = get_unaligned_be32(lun_data->scsi_lun) + + sizeof(struct scsi_lun); + kfree(lun_data); + goto retry; + } + length = get_unaligned_be32(lun_data->scsi_lun); num_luns = (length / sizeof(struct scsi_lun)); - if (num_luns > max_scsi_report_luns) { - sdev_printk(KERN_WARNING, sdev, - "Only %d (max_scsi_report_luns)" - " of %d luns reported, try increasing" - " max_scsi_report_luns.\n", - max_scsi_report_luns, num_luns); - num_luns = max_scsi_report_luns; - } SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, "scsi scan: REPORT LUN scan\n")); diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c index 82af28b90294..08bb47b53bc3 100644 --- a/drivers/scsi/scsi_trace.c +++ b/drivers/scsi/scsi_trace.c @@ -143,7 +143,7 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) cmd = "WRITE_SAME"; break; default: - trace_seq_printf(p, "UNKNOWN"); + trace_seq_puts(p, "UNKNOWN"); goto out; } @@ -204,7 +204,7 @@ scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len) cmd = "GET_LBA_STATUS"; break; default: - trace_seq_printf(p, "UNKNOWN"); + trace_seq_puts(p, "UNKNOWN"); goto out; } @@ -249,7 +249,7 @@ scsi_trace_misc(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p); - trace_seq_printf(p, "-"); + trace_seq_putc(p, '-'); trace_seq_putc(p, 0); return ret; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 05ea0d49a3a3..6b78476d04bb 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3320,11 +3320,8 @@ module_exit(exit_sd); static void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) { - scsi_show_sense_hdr(sdkp->device, - sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr); - scsi_show_extd_sense(sdkp->device, - sdkp->disk ? sdkp->disk->disk_name : NULL, - sshdr->asc, sshdr->ascq); + scsi_print_sense_hdr(sdkp->device, + sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr); } static void sd_print_result(const struct scsi_disk *sdkp, const char *msg, diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index b7e79e7646ad..dcb0d76d7312 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -47,7 +47,6 @@ struct ses_device { struct ses_component { u64 addr; - unsigned char *desc; }; static int ses_probe(struct device *dev) @@ -68,6 +67,20 @@ static int ses_probe(struct device *dev) #define SES_TIMEOUT (30 * HZ) #define SES_RETRIES 3 +static void init_device_slot_control(unsigned char *dest_desc, + struct enclosure_component *ecomp, + unsigned char *status) +{ + memcpy(dest_desc, status, 4); + dest_desc[0] = 0; + /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */ + if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE) + dest_desc[1] = 0; + dest_desc[2] &= 0xde; + dest_desc[3] &= 0x3c; +} + + static int ses_recv_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { @@ -179,14 +192,22 @@ static int ses_set_fault(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { - unsigned char desc[4] = {0 }; + unsigned char desc[4]; + unsigned char *desc_ptr; + + desc_ptr = ses_get_page2_descriptor(edev, ecomp); + + if (!desc_ptr) + return -EIO; + + init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: - /* zero is disabled */ + desc[3] &= 0xdf; break; case ENCLOSURE_SETTING_ENABLED: - desc[3] = 0x20; + desc[3] |= 0x20; break; default: /* SES doesn't do the SGPIO blink settings */ @@ -220,14 +241,22 @@ static int ses_set_locate(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { - unsigned char desc[4] = {0 }; + unsigned char desc[4]; + unsigned char *desc_ptr; + + desc_ptr = ses_get_page2_descriptor(edev, ecomp); + + if (!desc_ptr) + return -EIO; + + init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: - /* zero is disabled */ + desc[2] &= 0xfd; break; case ENCLOSURE_SETTING_ENABLED: - desc[2] = 0x02; + desc[2] |= 0x02; break; default: /* SES doesn't do the SGPIO blink settings */ @@ -240,15 +269,23 @@ static int ses_set_active(struct enclosure_device *edev, struct enclosure_component *ecomp, enum enclosure_component_setting val) { - unsigned char desc[4] = {0 }; + unsigned char desc[4]; + unsigned char *desc_ptr; + + desc_ptr = ses_get_page2_descriptor(edev, ecomp); + + if (!desc_ptr) + return -EIO; + + init_device_slot_control(desc, ecomp, desc_ptr); switch (val) { case ENCLOSURE_SETTING_DISABLED: - /* zero is disabled */ + desc[2] &= 0x7f; ecomp->active = 0; break; case ENCLOSURE_SETTING_ENABLED: - desc[2] = 0x80; + desc[2] |= 0x80; ecomp->active = 1; break; default: @@ -258,13 +295,63 @@ static int ses_set_active(struct enclosure_device *edev, return ses_set_page2_descriptor(edev, ecomp, desc); } +static int ses_show_id(struct enclosure_device *edev, char *buf) +{ + struct ses_device *ses_dev = edev->scratch; + unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4); + + return sprintf(buf, "%#llx\n", id); +} + +static void ses_get_power_status(struct enclosure_device *edev, + struct enclosure_component *ecomp) +{ + unsigned char *desc; + + desc = ses_get_page2_descriptor(edev, ecomp); + if (desc) + ecomp->power_status = (desc[3] & 0x10) ? 0 : 1; +} + +static int ses_set_power_status(struct enclosure_device *edev, + struct enclosure_component *ecomp, + int val) +{ + unsigned char desc[4]; + unsigned char *desc_ptr; + + desc_ptr = ses_get_page2_descriptor(edev, ecomp); + + if (!desc_ptr) + return -EIO; + + init_device_slot_control(desc, ecomp, desc_ptr); + + switch (val) { + /* power = 1 is device_off = 0 and vice versa */ + case 0: + desc[3] |= 0x10; + break; + case 1: + desc[3] &= 0xef; + break; + default: + return -EINVAL; + } + ecomp->power_status = val; + return ses_set_page2_descriptor(edev, ecomp, desc); +} + static struct enclosure_component_callbacks ses_enclosure_callbacks = { .get_fault = ses_get_fault, .set_fault = ses_set_fault, .get_status = ses_get_status, .get_locate = ses_get_locate, .set_locate = ses_set_locate, + .get_power_status = ses_get_power_status, + .set_power_status = ses_set_power_status, .set_active = ses_set_active, + .show_id = ses_show_id, }; struct ses_host_edev { @@ -298,19 +385,26 @@ static void ses_process_descriptor(struct enclosure_component *ecomp, int invalid = desc[0] & 0x80; enum scsi_protocol proto = desc[0] & 0x0f; u64 addr = 0; + int slot = -1; struct ses_component *scomp = ecomp->scratch; unsigned char *d; - scomp->desc = desc; - if (invalid) return; switch (proto) { + case SCSI_PROTOCOL_FCP: + if (eip) { + d = desc + 4; + slot = d[3]; + } + break; case SCSI_PROTOCOL_SAS: - if (eip) + if (eip) { + d = desc + 4; + slot = d[3]; d = desc + 8; - else + } else d = desc + 4; /* only take the phy0 addr */ addr = (u64)d[12] << 56 | @@ -326,6 +420,7 @@ static void ses_process_descriptor(struct enclosure_component *ecomp, /* FIXME: Need to add more protocols than just SAS */ break; } + ecomp->slot = slot; scomp->addr = addr; } @@ -349,7 +444,8 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev, if (scomp->addr != efd->addr) continue; - enclosure_add_device(edev, i, efd->dev); + if (enclosure_add_device(edev, i, efd->dev) == 0) + kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE); return 1; } return 0; @@ -423,16 +519,24 @@ static void ses_enclosure_data_process(struct enclosure_device *edev, type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) { if (create) - ecomp = enclosure_component_register(edev, - components++, - type_ptr[0], - name); + ecomp = enclosure_component_alloc( + edev, + components++, + type_ptr[0], + name); else ecomp = &edev->component[components++]; - if (!IS_ERR(ecomp) && addl_desc_ptr) - ses_process_descriptor(ecomp, - addl_desc_ptr); + if (!IS_ERR(ecomp)) { + ses_get_power_status(edev, ecomp); + if (addl_desc_ptr) + ses_process_descriptor( + ecomp, + addl_desc_ptr); + if (create) + enclosure_component_register( + ecomp); + } } if (desc_ptr) desc_ptr += len; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index b14f64cb9724..a668c88ea150 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -763,7 +763,7 @@ static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking) { - int k, data_dir, at_head; + int k, at_head; Sg_device *sdp = sfp->parentdp; sg_io_hdr_t *hp = &srp->header; @@ -793,21 +793,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, return -ENODEV; } - switch (hp->dxfer_direction) { - case SG_DXFER_TO_FROM_DEV: - case SG_DXFER_FROM_DEV: - data_dir = DMA_FROM_DEVICE; - break; - case SG_DXFER_TO_DEV: - data_dir = DMA_TO_DEVICE; - break; - case SG_DXFER_UNKNOWN: - data_dir = DMA_BIDIRECTIONAL; - break; - default: - data_dir = DMA_NONE; - break; - } hp->duration = jiffies_to_msecs(jiffies); if (hp->interface_id != '\0' && /* v3 (or later) interface */ (SG_FLAG_Q_AT_TAIL & hp->flags)) diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index fb929fac22ba..03054c0e7689 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -245,9 +245,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) sr_printk(KERN_INFO, cd, "CDROM not ready. Make sure there " "is a disc in the drive.\n"); -#ifdef DEBUG - scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr); -#endif err = -ENOMEDIUM; break; case ILLEGAL_REQUEST: @@ -256,16 +253,8 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) sshdr.ascq == 0x00) /* sense: Invalid command operation code */ err = -EDRIVE_CANT_DO_THIS; -#ifdef DEBUG - __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE); - scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr); -#endif break; default: - sr_printk(KERN_ERR, cd, - "CDROM (ioctl) error, command: "); - __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE); - scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr); err = -EIO; } } diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 4cff0ddc2c25..efc6e446b6c8 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -32,7 +32,6 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/hyperv.h> -#include <linux/mempool.h> #include <linux/blkdev.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -309,14 +308,6 @@ enum storvsc_request_type { * This is the end of Protocol specific defines. */ - -/* - * We setup a mempool to allocate request structures for this driver - * on a per-lun basis. The following define specifies the number of - * elements in the pool. - */ - -#define STORVSC_MIN_BUF_NR 64 static int storvsc_ringbuffer_size = (20 * PAGE_SIZE); module_param(storvsc_ringbuffer_size, int, S_IRUGO); @@ -346,7 +337,6 @@ static void storvsc_on_channel_callback(void *context); #define STORVSC_IDE_MAX_CHANNELS 1 struct storvsc_cmd_request { - struct list_head entry; struct scsi_cmnd *cmd; unsigned int bounce_sgl_count; @@ -357,7 +347,6 @@ struct storvsc_cmd_request { /* Synchronize the request/response if needed */ struct completion wait_event; - unsigned char *sense_buffer; struct hv_multipage_buffer data_buffer; struct vstor_packet vstor_packet; }; @@ -389,11 +378,6 @@ struct storvsc_device { struct storvsc_cmd_request reset_request; }; -struct stor_mem_pools { - struct kmem_cache *request_pool; - mempool_t *request_mempool; -}; - struct hv_host_device { struct hv_device *dev; unsigned int port; @@ -426,21 +410,42 @@ done: kfree(wrk); } -static void storvsc_bus_scan(struct work_struct *work) +static void storvsc_host_scan(struct work_struct *work) { struct storvsc_scan_work *wrk; - int id, order_id; + struct Scsi_Host *host; + struct scsi_device *sdev; + unsigned long flags; wrk = container_of(work, struct storvsc_scan_work, work); - for (id = 0; id < wrk->host->max_id; ++id) { - if (wrk->host->reverse_ordering) - order_id = wrk->host->max_id - id - 1; - else - order_id = id; - - scsi_scan_target(&wrk->host->shost_gendev, 0, - order_id, SCAN_WILD_CARD, 1); + host = wrk->host; + + /* + * Before scanning the host, first check to see if any of the + * currrently known devices have been hot removed. We issue a + * "unit ready" command against all currently known devices. + * This I/O will result in an error for devices that have been + * removed. As part of handling the I/O error, we remove the device. + * + * When a LUN is added or removed, the host sends us a signal to + * scan the host. Thus we are forced to discover the LUNs that + * may have been removed this way. + */ + mutex_lock(&host->scan_mutex); + spin_lock_irqsave(host->host_lock, flags); + list_for_each_entry(sdev, &host->__devices, siblings) { + spin_unlock_irqrestore(host->host_lock, flags); + scsi_test_unit_ready(sdev, 1, 1, NULL); + spin_lock_irqsave(host->host_lock, flags); + continue; } + spin_unlock_irqrestore(host->host_lock, flags); + mutex_unlock(&host->scan_mutex); + /* + * Now scan the host to discover LUNs that may have been added. + */ + scsi_scan_host(host); + kfree(wrk); } @@ -1070,10 +1075,8 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) { struct scsi_cmnd *scmnd = cmd_request->cmd; struct hv_host_device *host_dev = shost_priv(scmnd->device->host); - void (*scsi_done_fn)(struct scsi_cmnd *); struct scsi_sense_hdr sense_hdr; struct vmscsi_request *vm_srb; - struct stor_mem_pools *memp = scmnd->device->hostdata; struct Scsi_Host *host; struct storvsc_device *stor_dev; struct hv_device *dev = host_dev->dev; @@ -1109,14 +1112,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) cmd_request->data_buffer.len - vm_srb->data_transfer_length); - scsi_done_fn = scmnd->scsi_done; - - scmnd->host_scribble = NULL; - scmnd->scsi_done = NULL; - - scsi_done_fn(scmnd); - - mempool_free(cmd_request, memp->request_mempool); + scmnd->scsi_done(scmnd); } static void storvsc_on_io_completion(struct hv_device *device, @@ -1160,7 +1156,7 @@ static void storvsc_on_io_completion(struct hv_device *device, SRB_STATUS_AUTOSENSE_VALID) { /* autosense data available */ - memcpy(request->sense_buffer, + memcpy(request->cmd->sense_buffer, vstor_packet->vm_srb.sense_data, vstor_packet->vm_srb.sense_info_length); @@ -1198,7 +1194,7 @@ static void storvsc_on_receive(struct hv_device *device, if (!work) return; - INIT_WORK(&work->work, storvsc_bus_scan); + INIT_WORK(&work->work, storvsc_host_scan); work->host = stor_device->host; schedule_work(&work->work); break; @@ -1378,55 +1374,6 @@ static int storvsc_do_io(struct hv_device *device, return ret; } -static int storvsc_device_alloc(struct scsi_device *sdevice) -{ - struct stor_mem_pools *memp; - int number = STORVSC_MIN_BUF_NR; - - memp = kzalloc(sizeof(struct stor_mem_pools), GFP_KERNEL); - if (!memp) - return -ENOMEM; - - memp->request_pool = - kmem_cache_create(dev_name(&sdevice->sdev_dev), - sizeof(struct storvsc_cmd_request), 0, - SLAB_HWCACHE_ALIGN, NULL); - - if (!memp->request_pool) - goto err0; - - memp->request_mempool = mempool_create(number, mempool_alloc_slab, - mempool_free_slab, - memp->request_pool); - - if (!memp->request_mempool) - goto err1; - - sdevice->hostdata = memp; - - return 0; - -err1: - kmem_cache_destroy(memp->request_pool); - -err0: - kfree(memp); - return -ENOMEM; -} - -static void storvsc_device_destroy(struct scsi_device *sdevice) -{ - struct stor_mem_pools *memp = sdevice->hostdata; - - if (!memp) - return; - - mempool_destroy(memp->request_mempool); - kmem_cache_destroy(memp->request_pool); - kfree(memp); - sdevice->hostdata = NULL; -} - static int storvsc_device_configure(struct scsi_device *sdevice) { scsi_change_queue_depth(sdevice, STORVSC_MAX_IO_REQUESTS); @@ -1447,6 +1394,19 @@ static int storvsc_device_configure(struct scsi_device *sdevice) */ sdevice->sdev_bflags |= msft_blist_flags; + /* + * If the host is WIN8 or WIN8 R2, claim conformance to SPC-3 + * if the device is a MSFT virtual device. + */ + if (!strncmp(sdevice->vendor, "Msft", 4)) { + switch (vmbus_proto_version) { + case VERSION_WIN8: + case VERSION_WIN8_1: + sdevice->scsi_level = SCSI_SPC_3; + break; + } + } + return 0; } @@ -1561,13 +1521,11 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) int ret; struct hv_host_device *host_dev = shost_priv(host); struct hv_device *dev = host_dev->dev; - struct storvsc_cmd_request *cmd_request; - unsigned int request_size = 0; + struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd); int i; struct scatterlist *sgl; unsigned int sg_count = 0; struct vmscsi_request *vm_srb; - struct stor_mem_pools *memp = scmnd->device->hostdata; if (vmstor_current_major <= VMSTOR_WIN8_MAJOR) { /* @@ -1584,25 +1542,9 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) } } - request_size = sizeof(struct storvsc_cmd_request); - - cmd_request = mempool_alloc(memp->request_mempool, - GFP_ATOMIC); - - /* - * We might be invoked in an interrupt context; hence - * mempool_alloc() can fail. - */ - if (!cmd_request) - return SCSI_MLQUEUE_DEVICE_BUSY; - - memset(cmd_request, 0, sizeof(struct storvsc_cmd_request)); - /* Setup the cmd request */ cmd_request->cmd = scmnd; - scmnd->host_scribble = (unsigned char *)cmd_request; - vm_srb = &cmd_request->vstor_packet.vm_srb; vm_srb->win8_extension.time_out_value = 60; @@ -1637,9 +1579,6 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length); - cmd_request->sense_buffer = scmnd->sense_buffer; - - cmd_request->data_buffer.len = scsi_bufflen(scmnd); if (scsi_sg_count(scmnd)) { sgl = (struct scatterlist *)scsi_sglist(scmnd); @@ -1651,10 +1590,8 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) create_bounce_buffer(sgl, scsi_sg_count(scmnd), scsi_bufflen(scmnd), vm_srb->data_in); - if (!cmd_request->bounce_sgl) { - ret = SCSI_MLQUEUE_HOST_BUSY; - goto queue_error; - } + if (!cmd_request->bounce_sgl) + return SCSI_MLQUEUE_HOST_BUSY; cmd_request->bounce_sgl_count = ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >> @@ -1692,27 +1629,21 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) destroy_bounce_buffer(cmd_request->bounce_sgl, cmd_request->bounce_sgl_count); - ret = SCSI_MLQUEUE_DEVICE_BUSY; - goto queue_error; + return SCSI_MLQUEUE_DEVICE_BUSY; } return 0; - -queue_error: - mempool_free(cmd_request, memp->request_mempool); - scmnd->host_scribble = NULL; - return ret; } static struct scsi_host_template scsi_driver = { .module = THIS_MODULE, .name = "storvsc_host_t", + .cmd_size = sizeof(struct storvsc_cmd_request), .bios_param = storvsc_get_chs, .queuecommand = storvsc_queuecommand, .eh_host_reset_handler = storvsc_host_reset_handler, + .proc_name = "storvsc_host", .eh_timed_out = storvsc_eh_timed_out, - .slave_alloc = storvsc_device_alloc, - .slave_destroy = storvsc_device_destroy, .slave_configure = storvsc_device_configure, .cmd_per_lun = 255, .can_queue = STORVSC_MAX_IO_REQUESTS*STORVSC_MAX_TARGETS, @@ -1760,6 +1691,9 @@ static int storvsc_probe(struct hv_device *device, bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false); int target = 0; struct storvsc_device *stor_device; + int max_luns_per_target; + int max_targets; + int max_channels; /* * Based on the windows host we are running on, @@ -1773,12 +1707,18 @@ static int storvsc_probe(struct hv_device *device, vmscsi_size_delta = sizeof(struct vmscsi_win8_extension); vmstor_current_major = VMSTOR_WIN7_MAJOR; vmstor_current_minor = VMSTOR_WIN7_MINOR; + max_luns_per_target = STORVSC_IDE_MAX_LUNS_PER_TARGET; + max_targets = STORVSC_IDE_MAX_TARGETS; + max_channels = STORVSC_IDE_MAX_CHANNELS; break; default: sense_buffer_size = POST_WIN7_STORVSC_SENSE_BUFFER_SIZE; vmscsi_size_delta = 0; vmstor_current_major = VMSTOR_WIN8_MAJOR; vmstor_current_minor = VMSTOR_WIN8_MINOR; + max_luns_per_target = STORVSC_MAX_LUNS_PER_TARGET; + max_targets = STORVSC_MAX_TARGETS; + max_channels = STORVSC_MAX_CHANNELS; break; } @@ -1826,9 +1766,9 @@ static int storvsc_probe(struct hv_device *device, break; case SCSI_GUID: - host->max_lun = STORVSC_MAX_LUNS_PER_TARGET; - host->max_id = STORVSC_MAX_TARGETS; - host->max_channel = STORVSC_MAX_CHANNELS - 1; + host->max_lun = max_luns_per_target; + host->max_id = max_targets; + host->max_channel = max_channels - 1; break; default: diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 6e07b2afddeb..8a1f4b355416 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -70,3 +70,16 @@ config SCSI_UFSHCD_PLATFORM If you have a controller with this interface, say Y or M here. If unsure, say N. + +config SCSI_UFS_QCOM + bool "QCOM specific hooks to UFS controller platform driver" + depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM + select PHY_QCOM_UFS + help + This selects the QCOM specific additions to UFSHCD platform driver. + UFS host on QCOM needs some vendor specific configuration before + accessing the hardware which includes PHY configuration and vendor + specific registers. + + Select this if you have UFS controller on QCOM chipset. + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 1e5bd48457d6..8303bcce7a23 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,4 +1,5 @@ # UFSHCD makefile +obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c new file mode 100644 index 000000000000..9217af9bf734 --- /dev/null +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -0,0 +1,1004 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/time.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> + +#include <linux/phy/phy-qcom-ufs.h> +#include "ufshcd.h" +#include "unipro.h" +#include "ufs-qcom.h" +#include "ufshci.h" + +static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS]; + +static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result); +static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, + const char *speed_mode); +static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote); + +static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes) +{ + int err = 0; + + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes); + if (err) + dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n", + __func__, err); + + return err; +} + +static int ufs_qcom_host_clk_get(struct device *dev, + const char *name, struct clk **clk_out) +{ + struct clk *clk; + int err = 0; + + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(dev, "%s: failed to get %s err %d", + __func__, name, err); + } else { + *clk_out = clk; + } + + return err; +} + +static int ufs_qcom_host_clk_enable(struct device *dev, + const char *name, struct clk *clk) +{ + int err = 0; + + err = clk_prepare_enable(clk); + if (err) + dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err); + + return err; +} + +static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) +{ + if (!host->is_lane_clks_enabled) + return; + + clk_disable_unprepare(host->tx_l1_sync_clk); + clk_disable_unprepare(host->tx_l0_sync_clk); + clk_disable_unprepare(host->rx_l1_sync_clk); + clk_disable_unprepare(host->rx_l0_sync_clk); + + host->is_lane_clks_enabled = false; +} + +static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + if (host->is_lane_clks_enabled) + return 0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", + host->rx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", + host->tx_l0_sync_clk); + if (err) + goto disable_rx_l0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", + host->rx_l1_sync_clk); + if (err) + goto disable_tx_l0; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", + host->tx_l1_sync_clk); + if (err) + goto disable_rx_l1; + + host->is_lane_clks_enabled = true; + goto out; + +disable_rx_l1: + clk_disable_unprepare(host->rx_l1_sync_clk); +disable_tx_l0: + clk_disable_unprepare(host->tx_l0_sync_clk); +disable_rx_l0: + clk_disable_unprepare(host->rx_l0_sync_clk); +out: + return err; +} + +static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + err = ufs_qcom_host_clk_get(dev, + "rx_lane0_sync_clk", &host->rx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, + "tx_lane0_sync_clk", &host->tx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", + &host->rx_l1_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", + &host->tx_l1_sync_clk); +out: + return err; +} + +static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + u32 tx_lanes; + int err = 0; + + err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes); + if (err) + goto out; + + err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes); + if (err) + dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n", + __func__); + +out: + return err; +} + +static int ufs_qcom_check_hibern8(struct ufs_hba *hba) +{ + int err; + u32 tx_fsm_val = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); + + do { + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val); + if (err || tx_fsm_val == TX_FSM_HIBERN8) + break; + + /* sleep for max. 200us */ + usleep_range(100, 200); + } while (time_before(jiffies, timeout)); + + /* + * we might have scheduled out for long during polling so + * check the state again. + */ + if (time_after(jiffies, timeout)) + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val); + + if (err) { + dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", + __func__, err); + } else if (tx_fsm_val != TX_FSM_HIBERN8) { + err = tx_fsm_val; + dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", + __func__, err); + } + + return err; +} + +static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int ret = 0; + u8 major; + u16 minor, step; + bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B) + ? true : false; + + /* Assert PHY reset and apply PHY calibration values */ + ufs_qcom_assert_reset(hba); + /* provide 1ms delay to let the reset pulse propagate */ + usleep_range(1000, 1100); + + ufs_qcom_get_controller_revision(hba, &major, &minor, &step); + ufs_qcom_phy_save_controller_version(phy, major, minor, step); + ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B); + if (ret) { + dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n", + __func__, ret); + goto out; + } + + /* De-assert PHY reset and start serdes */ + ufs_qcom_deassert_reset(hba); + + /* + * after reset deassertion, phy will need all ref clocks, + * voltage, current to settle down before starting serdes. + */ + usleep_range(1000, 1100); + ret = ufs_qcom_phy_start_serdes(phy); + if (ret) { + dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n", + __func__, ret); + goto out; + } + + ret = ufs_qcom_phy_is_pcs_ready(phy); + if (ret) + dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n", + __func__, ret); + +out: + return ret; +} + +/* + * The UTP controller has a number of internal clock gating cells (CGCs). + * Internal hardware sub-modules within the UTP controller control the CGCs. + * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved + * in a specific operation, UTP controller CGCs are by default disabled and + * this function enables them (after every UFS link startup) to save some power + * leakage. + */ +static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) +{ + ufshcd_writel(hba, + ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL, + REG_UFS_CFG2); + + /* Ensure that HW clock gating is enabled before next operations */ + mb(); +} + +static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status) +{ + struct ufs_qcom_host *host = hba->priv; + int err = 0; + + switch (status) { + case PRE_CHANGE: + ufs_qcom_power_up_sequence(hba); + /* + * The PHY PLL output is the source of tx/rx lane symbol + * clocks, hence, enable the lane clocks only after PHY + * is initialized. + */ + err = ufs_qcom_enable_lane_clks(host); + break; + case POST_CHANGE: + /* check if UFS PHY moved from DISABLED to HIBERN8 */ + err = ufs_qcom_check_hibern8(hba); + ufs_qcom_enable_hw_clk_gating(hba); + + break; + default: + dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); + err = -EINVAL; + break; + } + return err; +} + +/** + * Returns non-zero for success (which rate of core_clk) and 0 + * in case of a failure + */ +static unsigned long +ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate) +{ + struct ufs_clk_info *clki; + u32 core_clk_period_in_ns; + u32 tx_clk_cycles_per_us = 0; + unsigned long core_clk_rate = 0; + u32 core_clk_cycles_per_us = 0; + + static u32 pwm_fr_table[][2] = { + {UFS_PWM_G1, 0x1}, + {UFS_PWM_G2, 0x1}, + {UFS_PWM_G3, 0x1}, + {UFS_PWM_G4, 0x1}, + }; + + static u32 hs_fr_table_rA[][2] = { + {UFS_HS_G1, 0x1F}, + {UFS_HS_G2, 0x3e}, + }; + + static u32 hs_fr_table_rB[][2] = { + {UFS_HS_G1, 0x24}, + {UFS_HS_G2, 0x49}, + }; + + if (gear == 0) { + dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); + goto out_error; + } + + list_for_each_entry(clki, &hba->clk_list_head, list) { + if (!strcmp(clki->name, "core_clk")) + core_clk_rate = clk_get_rate(clki->clk); + } + + /* If frequency is smaller than 1MHz, set to 1MHz */ + if (core_clk_rate < DEFAULT_CLK_RATE_HZ) + core_clk_rate = DEFAULT_CLK_RATE_HZ; + + core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; + ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); + + core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; + core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; + core_clk_period_in_ns &= MASK_CLK_NS_REG; + + switch (hs) { + case FASTAUTO_MODE: + case FAST_MODE: + if (rate == PA_HS_MODE_A) { + if (gear > ARRAY_SIZE(hs_fr_table_rA)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rA)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; + } else if (rate == PA_HS_MODE_B) { + if (gear > ARRAY_SIZE(hs_fr_table_rB)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rB)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; + } else { + dev_err(hba->dev, "%s: invalid rate = %d\n", + __func__, rate); + goto out_error; + } + break; + case SLOWAUTO_MODE: + case SLOW_MODE: + if (gear > ARRAY_SIZE(pwm_fr_table)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(pwm_fr_table)); + goto out_error; + } + tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; + break; + case UNCHANGED: + default: + dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); + goto out_error; + } + + /* this register 2 fields shall be written at once */ + ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us, + REG_UFS_TX_SYMBOL_CLK_NS_US); + goto out; + +out_error: + core_clk_rate = 0; +out: + return core_clk_rate; +} + +static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status) +{ + unsigned long core_clk_rate = 0; + u32 core_clk_cycles_per_100ms; + + switch (status) { + case PRE_CHANGE: + core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1, + SLOWAUTO_MODE, 0); + if (!core_clk_rate) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + return -EINVAL; + } + core_clk_cycles_per_100ms = + (core_clk_rate / MSEC_PER_SEC) * 100; + ufshcd_writel(hba, core_clk_cycles_per_100ms, + REG_UFS_PA_LINK_STARTUP_TIMER); + break; + case POST_CHANGE: + ufs_qcom_link_startup_post_change(hba); + break; + default: + break; + } + + return 0; +} + +static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int ret = 0; + + if (ufs_qcom_is_link_off(hba)) { + /* + * Disable the tx/rx lane symbol clocks before PHY is + * powered down as the PLL source should be disabled + * after downstream clocks are disabled. + */ + ufs_qcom_disable_lane_clks(host); + phy_power_off(phy); + + /* Assert PHY soft reset */ + ufs_qcom_assert_reset(hba); + goto out; + } + + /* + * If UniPro link is not active, PHY ref_clk, main PHY analog power + * rail and low noise analog power rail for PLL can be switched off. + */ + if (!ufs_qcom_is_link_active(hba)) + phy_power_off(phy); + +out: + return ret; +} + +static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int err; + + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "%s: failed enabling regs, err = %d\n", + __func__, err); + goto out; + } + + hba->is_sys_suspended = false; + +out: + return err; +} + +struct ufs_qcom_dev_params { + u32 pwm_rx_gear; /* pwm rx gear to work in */ + u32 pwm_tx_gear; /* pwm tx gear to work in */ + u32 hs_rx_gear; /* hs rx gear to work in */ + u32 hs_tx_gear; /* hs tx gear to work in */ + u32 rx_lanes; /* number of rx lanes */ + u32 tx_lanes; /* number of tx lanes */ + u32 rx_pwr_pwm; /* rx pwm working pwr */ + u32 tx_pwr_pwm; /* tx pwm working pwr */ + u32 rx_pwr_hs; /* rx hs working pwr */ + u32 tx_pwr_hs; /* tx hs working pwr */ + u32 hs_rate; /* rate A/B to work in HS */ + u32 desired_working_mode; +}; + +static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param, + struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) +{ + int min_qcom_gear; + int min_dev_gear; + bool is_dev_sup_hs = false; + bool is_qcom_max_hs = false; + + if (dev_max->pwr_rx == FAST_MODE) + is_dev_sup_hs = true; + + if (qcom_param->desired_working_mode == FAST) { + is_qcom_max_hs = true; + min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear, + qcom_param->hs_tx_gear); + } else { + min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear, + qcom_param->pwm_tx_gear); + } + + /* + * device doesn't support HS but qcom_param->desired_working_mode is + * HS, thus device and qcom_param don't agree + */ + if (!is_dev_sup_hs && is_qcom_max_hs) { + pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n", + __func__); + return -ENOTSUPP; + } else if (is_dev_sup_hs && is_qcom_max_hs) { + /* + * since device supports HS, it supports FAST_MODE. + * since qcom_param->desired_working_mode is also HS + * then final decision (FAST/FASTAUTO) is done according + * to qcom_params as it is the restricting factor + */ + agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = + qcom_param->rx_pwr_hs; + } else { + /* + * here qcom_param->desired_working_mode is PWM. + * it doesn't matter whether device supports HS or PWM, + * in both cases qcom_param->desired_working_mode will + * determine the mode + */ + agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = + qcom_param->rx_pwr_pwm; + } + + /* + * we would like tx to work in the minimum number of lanes + * between device capability and vendor preferences. + * the same decision will be made for rx + */ + agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, + qcom_param->tx_lanes); + agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, + qcom_param->rx_lanes); + + /* device maximum gear is the minimum between device rx and tx gears */ + min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); + + /* + * if both device capabilities and vendor pre-defined preferences are + * both HS or both PWM then set the minimum gear to be the chosen + * working gear. + * if one is PWM and one is HS then the one that is PWM get to decide + * what is the gear, as it is the one that also decided previously what + * pwr the device will be configured to. + */ + if ((is_dev_sup_hs && is_qcom_max_hs) || + (!is_dev_sup_hs && !is_qcom_max_hs)) + agreed_pwr->gear_rx = agreed_pwr->gear_tx = + min_t(u32, min_dev_gear, min_qcom_gear); + else if (!is_dev_sup_hs) + agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear; + else + agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear; + + agreed_pwr->hs_rate = qcom_param->hs_rate; + return 0; +} + +static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) +{ + int vote; + int err = 0; + char mode[BUS_VECTOR_NAME_LEN]; + + ufs_qcom_get_speed_mode(&host->dev_req_params, mode); + + vote = ufs_qcom_get_bus_vote(host, mode); + if (vote >= 0) + err = ufs_qcom_set_bus_vote(host, vote); + else + err = vote; + + if (err) + dev_err(host->hba->dev, "%s: failed %d\n", __func__, err); + else + host->bus_vote.saved_vote = vote; + return err; +} + +static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, + bool status, + struct ufs_pa_layer_attr *dev_max_params, + struct ufs_pa_layer_attr *dev_req_params) +{ + u32 val; + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + struct ufs_qcom_dev_params ufs_qcom_cap; + int ret = 0; + int res = 0; + + if (!dev_req_params) { + pr_err("%s: incoming dev_req_params is NULL\n", __func__); + ret = -EINVAL; + goto out; + } + + switch (status) { + case PRE_CHANGE: + ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX; + ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX; + ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX; + ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX; + ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX; + ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX; + ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM; + ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM; + ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS; + ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS; + ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufs_qcom_cap.desired_working_mode = + UFS_QCOM_LIMIT_DESIRED_MODE; + + ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap, + dev_max_params, + dev_req_params); + if (ret) { + pr_err("%s: failed to determine capabilities\n", + __func__); + goto out; + } + + break; + case POST_CHANGE: + if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate)) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + /* + * we return error code at the end of the routine, + * but continue to configure UFS_PHY_TX_LANE_ENABLE + * and bus voting as usual + */ + ret = -EINVAL; + } + + val = ~(MAX_U32 << dev_req_params->lane_tx); + res = ufs_qcom_phy_set_tx_lane_enable(phy, val); + if (res) { + dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n", + __func__, res); + ret = res; + } + + /* cache the power mode parameters to use internally */ + memcpy(&host->dev_req_params, + dev_req_params, sizeof(*dev_req_params)); + ufs_qcom_update_bus_bw_vote(host); + break; + default: + ret = -EINVAL; + break; + } +out: + return ret; +} + +/** + * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks + * @hba: host controller instance + * + * QCOM UFS host controller might have some non standard behaviours (quirks) + * than what is specified by UFSHCI specification. Advertise all such + * quirks to standard UFS host controller driver so standard takes them into + * account. + */ +static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) +{ + u8 major; + u16 minor, step; + + ufs_qcom_get_controller_revision(hba, &major, &minor, &step); + + /* + * TBD + * here we should be advertising controller quirks according to + * controller version. + */ +} + +static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, + const char *speed_mode) +{ + struct device *dev = host->hba->dev; + struct device_node *np = dev->of_node; + int err; + const char *key = "qcom,bus-vector-names"; + + if (!speed_mode) { + err = -EINVAL; + goto out; + } + + if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN")) + err = of_property_match_string(np, key, "MAX"); + else + err = of_property_match_string(np, key, speed_mode); + +out: + if (err < 0) + dev_err(dev, "%s: Invalid %s mode %d\n", + __func__, speed_mode, err); + return err; +} + +static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) +{ + int err = 0; + + if (vote != host->bus_vote.curr_vote) + host->bus_vote.curr_vote = vote; + + return err; +} + +static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result) +{ + int gear = max_t(u32, p->gear_rx, p->gear_tx); + int lanes = max_t(u32, p->lane_rx, p->lane_tx); + int pwr; + + /* default to PWM Gear 1, Lane 1 if power mode is not initialized */ + if (!gear) + gear = 1; + + if (!lanes) + lanes = 1; + + if (!p->pwr_rx && !p->pwr_tx) { + pwr = SLOWAUTO_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "MIN"); + } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE || + p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) { + pwr = FAST_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS", + p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes); + } else { + pwr = SLOW_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d", + "PWM", gear, lanes); + } +} + +static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on) +{ + struct ufs_qcom_host *host = hba->priv; + int err = 0; + int vote = 0; + + /* + * In case ufs_qcom_init() is not yet done, simply ignore. + * This ufs_qcom_setup_clocks() shall be called from + * ufs_qcom_init() after init is done. + */ + if (!host) + return 0; + + if (on) { + err = ufs_qcom_phy_enable_iface_clk(host->generic_phy); + if (err) + goto out; + + err = ufs_qcom_phy_enable_ref_clk(host->generic_phy); + if (err) { + dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n", + __func__, err); + ufs_qcom_phy_disable_iface_clk(host->generic_phy); + goto out; + } + /* enable the device ref clock */ + ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy); + vote = host->bus_vote.saved_vote; + if (vote == host->bus_vote.min_bw_vote) + ufs_qcom_update_bus_bw_vote(host); + } else { + /* M-PHY RMMI interface clocks can be turned off */ + ufs_qcom_phy_disable_iface_clk(host->generic_phy); + if (!ufs_qcom_is_link_active(hba)) { + /* turn off UFS local PHY ref_clk */ + ufs_qcom_phy_disable_ref_clk(host->generic_phy); + /* disable device ref_clk */ + ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy); + } + vote = host->bus_vote.min_bw_vote; + } + + err = ufs_qcom_set_bus_vote(host, vote); + if (err) + dev_err(hba->dev, "%s: set bus vote failed %d\n", + __func__, err); + +out: + return err; +} + +static ssize_t +show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_qcom_host *host = hba->priv; + + return snprintf(buf, PAGE_SIZE, "%u\n", + host->bus_vote.is_max_bw_needed); +} + +static ssize_t +store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_qcom_host *host = hba->priv; + uint32_t value; + + if (!kstrtou32(buf, 0, &value)) { + host->bus_vote.is_max_bw_needed = !!value; + ufs_qcom_update_bus_bw_vote(host); + } + + return count; +} + +static int ufs_qcom_bus_register(struct ufs_qcom_host *host) +{ + int err; + struct device *dev = host->hba->dev; + struct device_node *np = dev->of_node; + + err = of_property_count_strings(np, "qcom,bus-vector-names"); + if (err < 0 ) { + dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n", + __func__, err); + goto out; + } + + /* cache the vote index for minimum and maximum bandwidth */ + host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN"); + host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX"); + + host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw; + host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw; + sysfs_attr_init(&host->bus_vote.max_bus_bw.attr); + host->bus_vote.max_bus_bw.attr.name = "max_bus_bw"; + host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR; + err = device_create_file(dev, &host->bus_vote.max_bus_bw); +out: + return err; +} + +#define ANDROID_BOOT_DEV_MAX 30 +static char android_boot_dev[ANDROID_BOOT_DEV_MAX]; +static int get_android_boot_dev(char *str) +{ + strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX); + return 1; +} +__setup("androidboot.bootdevice=", get_android_boot_dev); + +/** + * ufs_qcom_init - bind phy with controller + * @hba: host controller instance + * + * Binds PHY with controller and powers up PHY enabling clocks + * and regulators. + * + * Returns -EPROBE_DEFER if binding fails, returns negative error + * on phy power up failure and returns zero on success. + */ +static int ufs_qcom_init(struct ufs_hba *hba) +{ + int err; + struct device *dev = hba->dev; + struct ufs_qcom_host *host; + + if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev))) + return -ENODEV; + + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + err = -ENOMEM; + dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); + goto out; + } + + host->hba = hba; + hba->priv = (void *)host; + + host->generic_phy = devm_phy_get(dev, "ufsphy"); + + if (IS_ERR(host->generic_phy)) { + err = PTR_ERR(host->generic_phy); + dev_err(dev, "%s: PHY get failed %d\n", __func__, err); + goto out; + } + + err = ufs_qcom_bus_register(host); + if (err) + goto out_host_free; + + phy_init(host->generic_phy); + err = phy_power_on(host->generic_phy); + if (err) + goto out_unregister_bus; + + err = ufs_qcom_init_lane_clks(host); + if (err) + goto out_disable_phy; + + ufs_qcom_advertise_quirks(hba); + + hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING; + hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; + + ufs_qcom_setup_clocks(hba, true); + + if (hba->dev->id < MAX_UFS_QCOM_HOSTS) + ufs_qcom_hosts[hba->dev->id] = host; + + goto out; + +out_disable_phy: + phy_power_off(host->generic_phy); +out_unregister_bus: + phy_exit(host->generic_phy); +out_host_free: + devm_kfree(dev, host); + hba->priv = NULL; +out: + return err; +} + +static void ufs_qcom_exit(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + + ufs_qcom_disable_lane_clks(host); + phy_power_off(host->generic_phy); +} + +static +void ufs_qcom_clk_scale_notify(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params; + + if (!dev_req_params) + return; + + ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate); +} + +/** + * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations + * + * The variant operations configure the necessary controller and PHY + * handshake during initialization. + */ +static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { + .name = "qcom", + .init = ufs_qcom_init, + .exit = ufs_qcom_exit, + .clk_scale_notify = ufs_qcom_clk_scale_notify, + .setup_clocks = ufs_qcom_setup_clocks, + .hce_enable_notify = ufs_qcom_hce_enable_notify, + .link_startup_notify = ufs_qcom_link_startup_notify, + .pwr_change_notify = ufs_qcom_pwr_change_notify, + .suspend = ufs_qcom_suspend, + .resume = ufs_qcom_resume, +}; +EXPORT_SYMBOL(ufs_hba_qcom_vops); diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h new file mode 100644 index 000000000000..9a6febd007df --- /dev/null +++ b/drivers/scsi/ufs/ufs-qcom.h @@ -0,0 +1,170 @@ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_H_ +#define UFS_QCOM_H_ + +#define MAX_UFS_QCOM_HOSTS 1 +#define MAX_U32 (~(u32)0) +#define MPHY_TX_FSM_STATE 0x41 +#define TX_FSM_HIBERN8 0x1 +#define HBRN8_POLL_TOUT_MS 100 +#define DEFAULT_CLK_RATE_HZ 1000000 +#define BUS_VECTOR_NAME_LEN 32 + +#define UFS_HW_VER_MAJOR_SHFT (28) +#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT) +#define UFS_HW_VER_MINOR_SHFT (16) +#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT) +#define UFS_HW_VER_STEP_SHFT (0) +#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT) + +/* vendor specific pre-defined parameters */ +#define SLOW 1 +#define FAST 2 + +#define UFS_QCOM_LIMIT_NUM_LANES_RX 2 +#define UFS_QCOM_LIMIT_NUM_LANES_TX 2 +#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2 +#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2 +#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4 +#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4 +#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE +#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE +#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE +#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE +#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B +#define UFS_QCOM_LIMIT_DESIRED_MODE FAST + +/* QCOM UFS host controller vendor specific registers */ +enum { + REG_UFS_SYS1CLK_1US = 0xC0, + REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4, + REG_UFS_LOCAL_PORT_ID_REG = 0xC8, + REG_UFS_PA_ERR_CODE = 0xCC, + REG_UFS_RETRY_TIMER_REG = 0xD0, + REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8, + REG_UFS_CFG1 = 0xDC, + REG_UFS_CFG2 = 0xE0, + REG_UFS_HW_VERSION = 0xE4, + + UFS_DBG_RD_REG_UAWM = 0x100, + UFS_DBG_RD_REG_UARM = 0x200, + UFS_DBG_RD_REG_TXUC = 0x300, + UFS_DBG_RD_REG_RXUC = 0x400, + UFS_DBG_RD_REG_DFC = 0x500, + UFS_DBG_RD_REG_TRLUT = 0x600, + UFS_DBG_RD_REG_TMRLUT = 0x700, + UFS_UFS_DBG_RD_REG_OCSC = 0x800, + + UFS_UFS_DBG_RD_DESC_RAM = 0x1500, + UFS_UFS_DBG_RD_PRDT_RAM = 0x1700, + UFS_UFS_DBG_RD_RESP_RAM = 0x1800, + UFS_UFS_DBG_RD_EDTL_RAM = 0x1900, +}; + +/* bit definitions for REG_UFS_CFG2 register */ +#define UAWM_HW_CGC_EN (1 << 0) +#define UARM_HW_CGC_EN (1 << 1) +#define TXUC_HW_CGC_EN (1 << 2) +#define RXUC_HW_CGC_EN (1 << 3) +#define DFC_HW_CGC_EN (1 << 4) +#define TRLUT_HW_CGC_EN (1 << 5) +#define TMRLUT_HW_CGC_EN (1 << 6) +#define OCSC_HW_CGC_EN (1 << 7) + +#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\ + TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\ + DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\ + TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN) + +/* bit offset */ +enum { + OFFSET_UFS_PHY_SOFT_RESET = 1, + OFFSET_CLK_NS_REG = 10, +}; + +/* bit masks */ +enum { + MASK_UFS_PHY_SOFT_RESET = 0x2, + MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF, + MASK_CLK_NS_REG = 0xFFFC00, +}; + +enum ufs_qcom_phy_init_type { + UFS_PHY_INIT_FULL, + UFS_PHY_INIT_CFG_RESTORE, +}; + +static inline void +ufs_qcom_get_controller_revision(struct ufs_hba *hba, + u8 *major, u16 *minor, u16 *step) +{ + u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION); + + *major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT; + *minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT; + *step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT; +}; + +static inline void ufs_qcom_assert_reset(struct ufs_hba *hba) +{ + ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, + 1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); + + /* + * Make sure assertion of ufs phy reset is written to + * register before returning + */ + mb(); +} + +static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba) +{ + ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET, + 0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1); + + /* + * Make sure de-assertion of ufs phy reset is written to + * register before returning + */ + mb(); +} + +struct ufs_qcom_bus_vote { + uint32_t client_handle; + uint32_t curr_vote; + int min_bw_vote; + int max_bw_vote; + int saved_vote; + bool is_max_bw_needed; + struct device_attribute max_bus_bw; +}; + +struct ufs_qcom_host { + struct phy *generic_phy; + struct ufs_hba *hba; + struct ufs_qcom_bus_vote bus_vote; + struct ufs_pa_layer_attr dev_req_params; + struct clk *rx_l0_sync_clk; + struct clk *tx_l0_sync_clk; + struct clk *rx_l1_sync_clk; + struct clk *tx_l1_sync_clk; + bool is_lane_clks_enabled; +}; + +#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba) +#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba) +#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba) + +#endif /* UFS_QCOM_H_ */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 2e4614b9dddf..5d60a868830d 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4714,10 +4714,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, sdev_printk(KERN_WARNING, sdp, "START_STOP failed for power mode: %d, result %x\n", pwr_mode, ret); - if (driver_byte(ret) & DRIVER_SENSE) { - scsi_show_sense_hdr(sdp, NULL, &sshdr); - scsi_show_extd_sense(sdp, NULL, sshdr.asc, sshdr.ascq); - } + if (driver_byte(ret) & DRIVER_SENSE) + scsi_print_sense_hdr(sdp, NULL, &sshdr); } if (!ret) diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index c0506de4f3b6..9e09da412b92 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -2143,22 +2143,22 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance) seq_printf(m, "\nclock_freq=%02x no_sync=%02x no_dma=%d" " dma_mode=%02x fast=%d", hd->clock_freq, hd->no_sync, hd->no_dma, hd->dma_mode, hd->fast); - seq_printf(m, "\nsync_xfer[] = "); + seq_puts(m, "\nsync_xfer[] = "); for (x = 0; x < 7; x++) seq_printf(m, "\t%02x", hd->sync_xfer[x]); - seq_printf(m, "\nsync_stat[] = "); + seq_puts(m, "\nsync_stat[] = "); for (x = 0; x < 7; x++) seq_printf(m, "\t%02x", hd->sync_stat[x]); } #ifdef PROC_STATISTICS if (hd->proc & PR_STATISTICS) { - seq_printf(m, "\ncommands issued: "); + seq_puts(m, "\ncommands issued: "); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->cmd_cnt[x]); - seq_printf(m, "\ndisconnects allowed:"); + seq_puts(m, "\ndisconnects allowed:"); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]); - seq_printf(m, "\ndisconnects done: "); + seq_puts(m, "\ndisconnects done: "); for (x = 0; x < 7; x++) seq_printf(m, "\t%ld", hd->disc_done_cnt[x]); seq_printf(m, @@ -2167,7 +2167,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance) } #endif if (hd->proc & PR_CONNECTED) { - seq_printf(m, "\nconnected: "); + seq_puts(m, "\nconnected: "); if (hd->connected) { cmd = (struct scsi_cmnd *) hd->connected; seq_printf(m, " %d:%llu(%02x)", @@ -2175,7 +2175,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance) } } if (hd->proc & PR_INPUTQ) { - seq_printf(m, "\ninput_Q: "); + seq_puts(m, "\ninput_Q: "); cmd = (struct scsi_cmnd *) hd->input_Q; while (cmd) { seq_printf(m, " %d:%llu(%02x)", @@ -2184,7 +2184,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance) } } if (hd->proc & PR_DISCQ) { - seq_printf(m, "\ndisconnected_Q:"); + seq_puts(m, "\ndisconnected_Q:"); cmd = (struct scsi_cmnd *) hd->disconnected_Q; while (cmd) { seq_printf(m, " %d:%llu(%02x)", @@ -2192,7 +2192,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance) cmd = (struct scsi_cmnd *) cmd->host_scribble; } } - seq_printf(m, "\n"); + seq_putc(m, '\n'); spin_unlock_irq(&hd->lock); #endif /* PROC_INTERFACE */ return 0; diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index f94d73611ab4..0c0f17b9a3eb 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -1295,9 +1295,6 @@ static void wd7000_revision(Adapter * host) } -#undef SPRINTF -#define SPRINTF(args...) { seq_printf(m, ## args); } - static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length) { dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length); @@ -1320,43 +1317,43 @@ static int wd7000_show_info(struct seq_file *m, struct Scsi_Host *host) #endif spin_lock_irqsave(host->host_lock, flags); - SPRINTF("Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2); - SPRINTF(" IO base: 0x%x\n", adapter->iobase); - SPRINTF(" IRQ: %d\n", adapter->irq); - SPRINTF(" DMA channel: %d\n", adapter->dma); - SPRINTF(" Interrupts: %d\n", adapter->int_counter); - SPRINTF(" BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125); - SPRINTF(" BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125); + seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2); + seq_printf(m, " IO base: 0x%x\n", adapter->iobase); + seq_printf(m, " IRQ: %d\n", adapter->irq); + seq_printf(m, " DMA channel: %d\n", adapter->dma); + seq_printf(m, " Interrupts: %d\n", adapter->int_counter); + seq_printf(m, " BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125); + seq_printf(m, " BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125); #ifdef WD7000_DEBUG ogmbs = adapter->mb.ogmb; icmbs = adapter->mb.icmb; - SPRINTF("\nControl port value: 0x%x\n", adapter->control); - SPRINTF("Incoming mailbox:\n"); - SPRINTF(" size: %d\n", ICMB_CNT); - SPRINTF(" queued messages: "); + seq_printf(m, "\nControl port value: 0x%x\n", adapter->control); + seq_puts(m, "Incoming mailbox:\n"); + seq_printf(m, " size: %d\n", ICMB_CNT); + seq_puts(m, " queued messages: "); for (i = count = 0; i < ICMB_CNT; i++) if (icmbs[i].status) { count++; - SPRINTF("0x%x ", i); + seq_printf(m, "0x%x ", i); } - SPRINTF(count ? "\n" : "none\n"); + seq_puts(m, count ? "\n" : "none\n"); - SPRINTF("Outgoing mailbox:\n"); - SPRINTF(" size: %d\n", OGMB_CNT); - SPRINTF(" next message: 0x%x\n", adapter->next_ogmb); - SPRINTF(" queued messages: "); + seq_puts(m, "Outgoing mailbox:\n"); + seq_printf(m, " size: %d\n", OGMB_CNT); + seq_printf(m, " next message: 0x%x\n", adapter->next_ogmb); + seq_puts(m, " queued messages: "); for (i = count = 0; i < OGMB_CNT; i++) if (ogmbs[i].status) { count++; - SPRINTF("0x%x ", i); + seq_printf(m, "0x%x ", i); } - SPRINTF(count ? "\n" : "none\n"); + seq_puts(m, count ? "\n" : "none\n"); #endif spin_unlock_irqrestore(host->host_lock, flags); diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c index ecd540a7a562..61653a03a8f5 100644 --- a/drivers/xen/xen-scsiback.c +++ b/drivers/xen/xen-scsiback.c @@ -47,6 +47,7 @@ #include <generated/utsrelease.h> +#include <scsi/scsi.h> #include <scsi/scsi_dbg.h> #include <scsi/scsi_eh.h> #include <scsi/scsi_tcq.h> diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index 9a33c5f7e126..7be22da321f3 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -79,6 +79,12 @@ struct enclosure_component_callbacks { int (*set_locate)(struct enclosure_device *, struct enclosure_component *, enum enclosure_component_setting); + void (*get_power_status)(struct enclosure_device *, + struct enclosure_component *); + int (*set_power_status)(struct enclosure_device *, + struct enclosure_component *, + int); + int (*show_id)(struct enclosure_device *, char *buf); }; @@ -91,7 +97,9 @@ struct enclosure_component { int fault; int active; int locate; + int slot; enum enclosure_status status; + int power_status; }; struct enclosure_device { @@ -120,8 +128,9 @@ enclosure_register(struct device *, const char *, int, struct enclosure_component_callbacks *); void enclosure_unregister(struct enclosure_device *); struct enclosure_component * -enclosure_component_register(struct enclosure_device *, unsigned int, - enum enclosure_component_type, const char *); +enclosure_component_alloc(struct enclosure_device *, unsigned int, + enum enclosure_component_type, const char *); +int enclosure_component_register(struct enclosure_component *); int enclosure_add_device(struct enclosure_device *enclosure, int component, struct device *dev); int enclosure_remove_device(struct enclosure_device *, struct device *); diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h new file mode 100644 index 000000000000..9d18e9f948e9 --- /dev/null +++ b/include/linux/phy/phy-qcom-ufs.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef PHY_QCOM_UFS_H_ +#define PHY_QCOM_UFS_H_ + +#include "phy.h" + +/** + * ufs_qcom_phy_enable_ref_clk() - Enable the phy + * ref clock. + * @phy: reference to a generic phy + * + * returns 0 for success, and non-zero for error. + */ +int ufs_qcom_phy_enable_ref_clk(struct phy *phy); + +/** + * ufs_qcom_phy_disable_ref_clk() - Disable the phy + * ref clock. + * @phy: reference to a generic phy. + */ +void ufs_qcom_phy_disable_ref_clk(struct phy *phy); + +/** + * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device + * ref clock. + * @phy: reference to a generic phy. + */ +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy); + +/** + * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device + * ref clock. + * @phy: reference to a generic phy. + */ +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy); + +int ufs_qcom_phy_enable_iface_clk(struct phy *phy); +void ufs_qcom_phy_disable_iface_clk(struct phy *phy); +int ufs_qcom_phy_start_serdes(struct phy *phy); +int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes); +int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B); +int ufs_qcom_phy_is_pcs_ready(struct phy *phy); +void ufs_qcom_phy_save_controller_version(struct phy *phy, + u8 major, u16 minor, u16 step); + +#endif /* PHY_QCOM_UFS_H_ */ diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 8a7f8ad58aac..d0a66aa1868d 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -195,6 +195,9 @@ enum scsi_timeouts { #define ATA_16 0x85 /* 16-byte pass-thru */ #define ATA_12 0xa1 /* 12-byte pass-thru */ +/* Vendor specific CDBs start here */ +#define VENDOR_SPECIFIC_CDB 0xc0 + /* * SCSI command lengths */ diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h index 7982795df595..f8170e90b49d 100644 --- a/include/scsi/scsi_dbg.h +++ b/include/scsi/scsi_dbg.h @@ -5,8 +5,11 @@ struct scsi_cmnd; struct scsi_device; struct scsi_sense_hdr; +#define SCSI_LOG_BUFSIZE 128 + extern void scsi_print_command(struct scsi_cmnd *); -extern void __scsi_print_command(const unsigned char *, size_t); +extern size_t __scsi_format_command(char *, size_t, + const unsigned char *, size_t); extern void scsi_show_extd_sense(const struct scsi_device *, const char *, unsigned char, unsigned char); extern void scsi_show_sense_hdr(const struct scsi_device *, const char *, @@ -17,12 +20,73 @@ extern void scsi_print_sense(const struct scsi_cmnd *); extern void __scsi_print_sense(const struct scsi_device *, const char *name, const unsigned char *sense_buffer, int sense_len); -extern void scsi_print_result(struct scsi_cmnd *, const char *, int); -extern const char *scsi_hostbyte_string(int); -extern const char *scsi_driverbyte_string(int); -extern const char *scsi_mlreturn_string(int); +extern void scsi_print_result(const struct scsi_cmnd *, const char *, int); + +#ifdef CONFIG_SCSI_CONSTANTS +extern bool scsi_opcode_sa_name(int, int, const char **, const char **); extern const char *scsi_sense_key_string(unsigned char); extern const char *scsi_extd_sense_format(unsigned char, unsigned char, const char **); +extern const char *scsi_mlreturn_string(int); +extern const char *scsi_hostbyte_string(int); +extern const char *scsi_driverbyte_string(int); +#else +static inline bool +scsi_opcode_sa_name(int cmd, int sa, + const char **cdb_name, const char **sa_name) +{ + *cdb_name = NULL; + switch (cmd) { + case VARIABLE_LENGTH_CMD: + case MAINTENANCE_IN: + case MAINTENANCE_OUT: + case PERSISTENT_RESERVE_IN: + case PERSISTENT_RESERVE_OUT: + case SERVICE_ACTION_IN_12: + case SERVICE_ACTION_OUT_12: + case SERVICE_ACTION_BIDIRECTIONAL: + case SERVICE_ACTION_IN_16: + case SERVICE_ACTION_OUT_16: + case EXTENDED_COPY: + case RECEIVE_COPY_RESULTS: + *sa_name = NULL; + return true; + default: + return false; + } +} + +static inline const char * +scsi_sense_key_string(unsigned char key) +{ + return NULL; +} + +static inline const char * +scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt) +{ + *fmt = NULL; + return NULL; +} + +static inline const char * +scsi_mlreturn_string(int result) +{ + return NULL; +} + +static inline const char * +scsi_hostbyte_string(int result) +{ + return NULL; +} + +static inline const char * +scsi_driverbyte_string(int result) +{ + return NULL; +} + +#endif #endif /* _SCSI_SCSI_DBG_H */ diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 3a4edd1f7dbb..a4c9336811d1 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -230,9 +230,6 @@ struct scsi_dh_data { #define transport_class_to_sdev(class_dev) \ to_scsi_device(class_dev->parent) -#define sdev_printk(prefix, sdev, fmt, a...) \ - dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a) - #define sdev_dbg(sdev, fmt, a...) \ dev_dbg(&(sdev)->sdev_gendev, fmt, ##a) @@ -240,16 +237,15 @@ struct scsi_dh_data { * like scmd_printk, but the device name is passed in * as a string pointer */ -#define sdev_prefix_printk(l, sdev, p, fmt, a...) \ - (p) ? \ - sdev_printk(l, sdev, "[%s] " fmt, p, ##a) : \ - sdev_printk(l, sdev, fmt, ##a) - -#define scmd_printk(prefix, scmd, fmt, a...) \ - (scmd)->request->rq_disk ? \ - sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \ - (scmd)->request->rq_disk->disk_name, ##a) : \ - sdev_printk(prefix, (scmd)->device, fmt, ##a) +__printf(4, 5) void +sdev_prefix_printk(const char *, const struct scsi_device *, const char *, + const char *, ...); + +#define sdev_printk(l, sdev, fmt, a...) \ + sdev_prefix_printk(l, sdev, NULL, fmt, ##a) + +__printf(3, 4) void +scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...); #define scmd_dbg(scmd, fmt, a...) \ do { \ |