Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Clearly mark ACPI drivers as such
  i2c: Add driver for SMBus Control Method Interface
  i2c-pnx: Correct use of request_region/request_mem_region
  MAINTAINERS: Add maintainer for AT24 and PCA9564/PCA9665
  i2c-piix4: Add AMD SB900 SMBus device ID
  i2c/chips: Remove deprecated pcf8574 driver
  i2c/chips: Remove deprecated pca9539 driver
  i2c/chips: Remove deprecated pcf8575 driver
  gpio/pcf857x: Copy i2c_device_id from old pcf8574 driver
  i2c/scx200_acb: Provide more information on bus errors
  i2c: Provide compatibility links for i2c adapters
  i2c: Convert i2c adapters to bus devices
  i2c: Convert i2c clients to a device type
  i2c/tsl2550: Use combined SMBus transactions
  i2c-taos-evm: Switch echo off to improve performance
  i2c: Drop unused i2c_driver.id field

24 files changed, 641 insertions, 934 deletions

diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index f889481762b5..c5b37c570554 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,6 +8,8 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
+  * AMD SB900
+    Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
 
diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539
deleted file mode 100644
index 6aff890088b1..000000000000
--- a/Documentation/i2c/chips/pca9539
+++ /dev/null
@@ -1,58 +0,0 @@
-Kernel driver pca9539
-=====================
-
-NOTE: this driver is deprecated and will be dropped soon, use
-drivers/gpio/pca9539.c instead.
-
-Supported chips:
-  * Philips PCA9539
-    Prefix: 'pca9539'
-    Addresses scanned: none
-    Datasheet:
-        http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
-
-Author: Ben Gardner <bgardner@wabtec.com>
-
-
-Description
------------
-
-The Philips PCA9539 is a 16 bit low power I/O device.
-All 16 lines can be individually configured as an input or output.
-The input sense can also be inverted.
-The 16 lines are split between two bytes.
-
-
-Detection
----------
-
-The PCA9539 is difficult to detect and not commonly found in PC machines,
-so you have to pass the I2C bus and address of the installed PCA9539
-devices explicitly to the driver at load time via the force=... parameter.
-
-
-Sysfs entries
--------------
-
-Each is a byte that maps to the 8 I/O bits.
-A '0' suffix is for bits 0-7, while '1' is for bits 8-15.
-
-input[01]     - read the current value
-output[01]    - sets the output value
-direction[01] - direction of each bit: 1=input, 0=output
-invert[01]    - toggle the input bit sense
-
-input reads the actual state of the line and is always available.
-The direction defaults to input for all channels.
-
-
-General Remarks
----------------
-
-Note that each output, direction, and invert entry controls 8 lines.
-You should use the read, modify, write sequence.
-For example. to set output bit 0 of 1.
-  val=$(cat output0)
-  val=$(( $val | 1 ))
-  echo $val > output0
-
diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574
deleted file mode 100644
index 235815c075ff..000000000000
--- a/Documentation/i2c/chips/pcf8574
+++ /dev/null
@@ -1,65 +0,0 @@
-Kernel driver pcf8574
-=====================
-
-Supported chips:
-  * Philips PCF8574
-    Prefix: 'pcf8574'
-    Addresses scanned: none
-    Datasheet: Publicly available at the Philips Semiconductors website
-               http://www.semiconductors.philips.com/pip/PCF8574P.html
-
- * Philips PCF8574A
-    Prefix: 'pcf8574a'
-    Addresses scanned: none
-    Datasheet: Publicly available at the Philips Semiconductors website
-               http://www.semiconductors.philips.com/pip/PCF8574P.html
-
-Authors:
-        Frodo Looijaard <frodol@dds.nl>,
-        Philip Edelbrock <phil@netroedge.com>,
-        Dan Eaton <dan.eaton@rocketlogix.com>,
-        Aurelien Jarno <aurelien@aurel32.net>,
-        Jean Delvare <khali@linux-fr.org>,
-
-
-Description
------------
-The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips
-Semiconductors. It is designed to provide a byte I2C interface to up to 16
-separate devices (8 x PCF8574 and 8 x PCF8574A).
-
-This device consists of a quasi-bidirectional port. Each of the eight I/Os
-can be independently used as an input or output. To setup an I/O as an
-input, you have to write a 1 to the corresponding output.
-
-For more informations see the datasheet.
-
-
-Accessing PCF8574(A) via /sys interface
--------------------------------------
-
-The PCF8574(A) is plainly impossible to detect ! Stupid chip.
-So, you have to pass the I2C bus and address of the installed PCF857A
-and PCF8574A devices explicitly to the driver at load time via the
-force=... parameter.
-
-On detection (i.e. insmod, modprobe et al.), directories are being
-created for each detected PCF8574(A):
-
-/sys/bus/i2c/devices/<0>-<1>/
-where <0> is the bus the chip was detected on (e. g. i2c-0)
-and <1> the chip address ([20..27] or [38..3f]):
-
-(example: /sys/bus/i2c/devices/1-0020/)
-
-Inside these directories, there are two files each:
-read and write (and one file with chip name).
-
-The read file is read-only. Reading gives you the current I/O input
-if the corresponding output is set as 1, otherwise the current output
-value, that is to say 0.
-
-The write file is read/write. Writing a value outputs it on the I/O
-port. Reading returns the last written value. As it is not possible
-to read this value from the chip, you need to write at least once to
-this file before you can read back from it.
diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575
deleted file mode 100644
index 40b268eb276f..000000000000
--- a/Documentation/i2c/chips/pcf8575
+++ /dev/null
@@ -1,69 +0,0 @@
-About the PCF8575 chip and the pcf8575 kernel driver
-====================================================
-
-The PCF8575 chip is produced by the following manufacturers:
-
-  * Philips NXP
-    http://www.nxp.com/#/pip/cb=[type=product,path=50807/41735/41850,final=PCF8575_3]|pip=[pip=PCF8575_3][0]
-
-  * Texas Instruments
-    http://focus.ti.com/docs/prod/folders/print/pcf8575.html
-
-
-Some vendors sell small PCB's with the PCF8575 mounted on it. You can connect
-such a board to a Linux host via e.g. an USB to I2C interface. Examples of
-PCB boards with a PCF8575:
-
-  * SFE Breakout Board for PCF8575 I2C Expander by RobotShop
-    http://www.robotshop.ca/home/products/robot-parts/electronics/adapters-converters/sfe-pcf8575-i2c-expander-board.html
-
-  * Breakout Board for PCF8575 I2C Expander by Spark Fun Electronics
-    http://www.sparkfun.com/commerce/product_info.php?products_id=8130
-
-
-Description
------------
-The PCF8575 chip is a 16-bit I/O expander for the I2C bus. Up to eight of
-these chips can be connected to the same I2C bus. You can find this
-chip on some custom designed hardware, but you won't find it on PC
-motherboards.
-
-The PCF8575 chip consists of a 16-bit quasi-bidirectional port and an I2C-bus
-interface. Each of the sixteen I/O's can be independently used as an input or
-an output. To set up an I/O pin as an input, you have to write a 1 to the
-corresponding output.
-
-For more information please see the datasheet.
-
-
-Detection
----------
-
-There is no method known to detect whether a chip on a given I2C address is
-a PCF8575 or whether it is any other I2C device, so you have to pass the I2C
-bus and address of the installed PCF8575 devices explicitly to the driver at
-load time via the force=... parameter.
-
-/sys interface
---------------
-
-For each address on which a PCF8575 chip was found or forced the following
-files will be created under /sys:
-* /sys/bus/i2c/devices/<bus>-<address>/read
-* /sys/bus/i2c/devices/<bus>-<address>/write
-where bus is the I2C bus number (0, 1, ...) and address is the four-digit
-hexadecimal representation of the 7-bit I2C address of the PCF8575
-(0020 .. 0027).
-
-The read file is read-only. Reading it will trigger an I2C read and will hence
-report the current input state for the pins configured as inputs, and the
-current output value for the pins configured as outputs.
-
-The write file is read-write. Writing a value to it will configure all pins
-as output for which the corresponding bit is zero. Reading the write file will
-return the value last written, or -EAGAIN if no value has yet been written to
-the write file.
-
-On module initialization the configuration of the chip is not changed -- the
-chip is left in the state it was already configured in through either power-up
-or through previous I2C write actions.
diff --git a/MAINTAINERS b/MAINTAINERS
index e1fc32e394aa..b9a8a365418c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -895,6 +895,13 @@ F:	drivers/dma/
 F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
+AT24 EEPROM DRIVER
+M:	Wolfram Sang <w.sang@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/misc/eeprom/at24.c
+F:	include/linux/i2c/at24.h
+
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Ed L. Cashin" <ecashin@coraid.com>
 W:	http://www.coraid.com/support/linux
@@ -3964,6 +3971,15 @@ S:	Maintained
 F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
+PCA9564/PCA9665 I2C BUS DRIVER
+M:	Wolfram Sang <w.sang@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/algos/i2c-algo-pca.c
+F:	drivers/i2c/busses/i2c-pca-*
+F:	include/linux/i2c-algo-pca.h
+F:	include/linux/i2c-pca-platform.h
+
 PCI ERROR RECOVERY
 M:	Linas Vepstas <linas@austin.ibm.com>
 L:	linux-pci@vger.kernel.org
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 72f2449c1c87..29f19ce3e80f 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -27,6 +27,7 @@
 
 static const struct i2c_device_id pcf857x_id[] = {
 	{ "pcf8574", 8 },
+	{ "pcf8574a", 8 },
 	{ "pca8574", 8 },
 	{ "pca9670", 8 },
 	{ "pca9672", 8 },
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 711ca08ab776..d7ece131b4f4 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -27,6 +27,14 @@ config I2C_BOARDINFO
 	boolean
 	default y
 
+config I2C_COMPAT
+	boolean "Enable compatibility bits for old user-space"
+	default y
+	help
+	  Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
+	  other user-space package which expects i2c adapters to be class
+	  devices. If you don't know, say Y.
+
 config I2C_CHARDEV
 	tristate "I2C device interface"
 	help
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8206442fbabd..6bedd2fcfc15 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -113,7 +113,7 @@ config I2C_ISCH
 	  will be called i2c-isch.
 
 config I2C_PIIX4
-	tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
+	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
 	depends on PCI
 	help
 	  If you say yes to this option, support will be included for the Intel
@@ -128,6 +128,7 @@ config I2C_PIIX4
 	    ATI SB600
 	    ATI SB700
 	    ATI SB800
+	    AMD SB900
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
@@ -231,6 +232,22 @@ config I2C_VIAPRO
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
 
+if ACPI
+
+comment "ACPI drivers"
+
+config I2C_SCMI
+	tristate "SMBus Control Method Interface"
+	help
+	  This driver supports the SMBus Control Method Interface. It needs the
+	  BIOS to declare ACPI control methods as described in the SMBus Control
+	  Method Interface specification.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called i2c-scmi.
+
+endif # ACPI
+
 comment "Mac SMBus host controller drivers"
 	depends on PPC_CHRP || PPC_PMAC
 
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e654263bfc01..ff937ac69f5b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -2,6 +2,9 @@
 # Makefile for the i2c bus drivers.
 #
 
+# ACPI drivers
+obj-$(CONFIG_I2C_SCMI)		+= i2c-scmi.o
+
 # PC SMBus host controller drivers
 obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
 obj-$(CONFIG_I2C_ALI1563)	+= i2c-ali1563.o
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 0249a7d762b9..a782c7a08f9e 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,6 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
+	AMD SB900
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -479,6 +480,7 @@ static struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
@@ -499,9 +501,10 @@ static int __devinit piix4_probe(struct pci_dev *dev,
 {
 	int retval;
 
-	if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
-	    (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
-	    (dev->revision >= 0x40))
+	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
+	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	     dev->revision >= 0x40) ||
+	    dev->vendor == PCI_VENDOR_ID_AMD)
 		/* base address location etc changed in SB800 */
 		retval = piix4_setup_sb800(dev, id);
 	else
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index ec15cff556b9..6ff6c20f1e78 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -586,7 +586,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
 
 	/* Register I/O resource */
-	if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+	if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE,
+				pdev->name)) {
 		dev_err(&pdev->dev,
 		       "I/O region 0x%08x for I2C already in use.\n",
 		       alg_data->base);
@@ -650,7 +651,7 @@ out_clock:
 out_unmap:
 	iounmap((void *)alg_data->ioaddr);
 out_release:
-	release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 out_drvdata:
 	platform_set_drvdata(pdev, NULL);
 out:
@@ -667,7 +668,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 	i2c_del_adapter(adap);
 	i2c_pnx->set_clock_stop(pdev);
 	iounmap((void *)alg_data->ioaddr);
-	release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
new file mode 100644
index 000000000000..276a046ac93f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -0,0 +1,430 @@
+/*
+ * SMBus driver for ACPI SMBus CMI
+ *
+ * Copyright (C) 2009 Crane Cai <crane.cai@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+
+#define ACPI_SMBUS_HC_CLASS		"smbus"
+#define ACPI_SMBUS_HC_DEVICE_NAME	"cmi"
+
+ACPI_MODULE_NAME("smbus_cmi");
+
+struct smbus_methods_t {
+	char *mt_info;
+	char *mt_sbr;
+	char *mt_sbw;
+};
+
+struct acpi_smbus_cmi {
+	acpi_handle handle;
+	struct i2c_adapter adapter;
+	u8 cap_info:1;
+	u8 cap_read:1;
+	u8 cap_write:1;
+};
+
+static const struct smbus_methods_t smbus_methods = {
+	.mt_info = "_SBI",
+	.mt_sbr  = "_SBR",
+	.mt_sbw  = "_SBW",
+};
+
+static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
+	{"SMBUS01", 0},
+	{"", 0}
+};
+
+#define ACPI_SMBUS_STATUS_OK			0x00
+#define ACPI_SMBUS_STATUS_FAIL			0x07
+#define ACPI_SMBUS_STATUS_DNAK			0x10
+#define ACPI_SMBUS_STATUS_DERR			0x11
+#define ACPI_SMBUS_STATUS_CMD_DENY		0x12
+#define ACPI_SMBUS_STATUS_UNKNOWN		0x13
+#define ACPI_SMBUS_STATUS_ACC_DENY		0x17
+#define ACPI_SMBUS_STATUS_TIMEOUT		0x18
+#define ACPI_SMBUS_STATUS_NOTSUP		0x19
+#define ACPI_SMBUS_STATUS_BUSY			0x1a
+#define ACPI_SMBUS_STATUS_PEC			0x1f
+
+#define ACPI_SMBUS_PRTCL_WRITE			0x00
+#define ACPI_SMBUS_PRTCL_READ			0x01
+#define ACPI_SMBUS_PRTCL_QUICK			0x02
+#define ACPI_SMBUS_PRTCL_BYTE			0x04
+#define ACPI_SMBUS_PRTCL_BYTE_DATA		0x06
+#define ACPI_SMBUS_PRTCL_WORD_DATA		0x08
+#define ACPI_SMBUS_PRTCL_BLOCK_DATA		0x0a
+
+
+static int
+acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int size,
+		   union i2c_smbus_data *data)
+{
+	int result = 0;
+	struct acpi_smbus_cmi *smbus_cmi = adap->algo_data;
+	unsigned char protocol;
+	acpi_status status = 0;
+	struct acpi_object_list input;
+	union acpi_object mt_params[5];
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	union acpi_object *pkg;
+	char *method;
+	int len = 0;
+
+	dev_dbg(&adap->dev, "access size: %d %s\n", size,
+		(read_write) ? "READ" : "WRITE");
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		protocol = ACPI_SMBUS_PRTCL_QUICK;
+		command = 0;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 0;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = 0;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE:
+		protocol = ACPI_SMBUS_PRTCL_BYTE;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 0;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = 0;
+		} else {
+			command = 0;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		protocol = ACPI_SMBUS_PRTCL_BYTE_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 1;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = data->byte;
+		}
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		protocol = ACPI_SMBUS_PRTCL_WORD_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = 2;
+			mt_params[4].type = ACPI_TYPE_INTEGER;
+			mt_params[4].integer.value = data->word;
+		}
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		protocol = ACPI_SMBUS_PRTCL_BLOCK_DATA;
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			mt_params[3].type = ACPI_TYPE_INTEGER;
+			mt_params[3].integer.value = len;
+			mt_params[4].type = ACPI_TYPE_BUFFER;
+			mt_params[4].buffer.pointer = data->block + 1;
+		}
+		break;
+
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	if (read_write == I2C_SMBUS_READ) {
+		protocol |= ACPI_SMBUS_PRTCL_READ;
+		method = smbus_methods.mt_sbr;
+		input.count = 3;
+	} else {
+		protocol |= ACPI_SMBUS_PRTCL_WRITE;
+		method = smbus_methods.mt_sbw;
+		input.count = 5;
+	}
+
+	input.pointer = mt_params;
+	mt_params[0].type = ACPI_TYPE_INTEGER;
+	mt_params[0].integer.value = protocol;
+	mt_params[1].type = ACPI_TYPE_INTEGER;
+	mt_params[1].integer.value = addr;
+	mt_params[2].type = ACPI_TYPE_INTEGER;
+	mt_params[2].integer.value = command;
+
+	status = acpi_evaluate_object(smbus_cmi->handle, method, &input,
+				      &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR((AE_INFO, "Evaluating %s: %i", method, status));
+		return -EIO;
+	}
+
+	pkg = buffer.pointer;
+	if (pkg && pkg->type == ACPI_TYPE_PACKAGE)
+		obj = pkg->package.elements;
+	else {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+	if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+
+	result = obj->integer.value;
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s return status: %i\n",
+			  method, result));
+
+	switch (result) {
+	case ACPI_SMBUS_STATUS_OK:
+		result = 0;
+		break;
+	case ACPI_SMBUS_STATUS_BUSY:
+		result = -EBUSY;
+		goto out;
+	case ACPI_SMBUS_STATUS_TIMEOUT:
+		result = -ETIMEDOUT;
+		goto out;
+	case ACPI_SMBUS_STATUS_DNAK:
+		result = -ENXIO;
+		goto out;
+	default:
+		result = -EIO;
+		goto out;
+	}
+
+	if (read_write == I2C_SMBUS_WRITE || size == I2C_SMBUS_QUICK)
+		goto out;
+
+	obj = pkg->package.elements + 1;
+	if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_ERROR((AE_INFO, "Invalid argument type"));
+		result = -EIO;
+		goto out;
+	}
+
+	len = obj->integer.value;
+	obj = pkg->package.elements + 2;
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+	case I2C_SMBUS_WORD_DATA:
+		if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			result = -EIO;
+			goto out;
+		}
+		if (len == 2)
+			data->word = obj->integer.value;
+		else
+			data->byte = obj->integer.value;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (obj == NULL || obj->type != ACPI_TYPE_BUFFER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			result = -EIO;
+			goto out;
+		}
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		data->block[0] = len;
+		memcpy(data->block + 1, obj->buffer.pointer, len);
+		break;
+	}
+
+out:
+	kfree(buffer.pointer);
+	dev_dbg(&adap->dev, "Transaction status: %i\n", result);
+	return result;
+}
+
+static u32 acpi_smbus_cmi_func(struct i2c_adapter *adapter)
+{
+	struct acpi_smbus_cmi *smbus_cmi = adapter->algo_data;
+	u32 ret;
+
+	ret = smbus_cmi->cap_read | smbus_cmi->cap_write ?
+		I2C_FUNC_SMBUS_QUICK : 0;
+
+	ret |= smbus_cmi->cap_read ?
+		(I2C_FUNC_SMBUS_READ_BYTE |
+		I2C_FUNC_SMBUS_READ_BYTE_DATA |
+		I2C_FUNC_SMBUS_READ_WORD_DATA |
+		I2C_FUNC_SMBUS_READ_BLOCK_DATA) : 0;
+
+	ret |= smbus_cmi->cap_write ?
+		(I2C_FUNC_SMBUS_WRITE_BYTE |
+		I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+		I2C_FUNC_SMBUS_WRITE_WORD_DATA |
+		I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) : 0;
+
+	return ret;
+}
+
+static const struct i2c_algorithm acpi_smbus_cmi_algorithm = {
+	.smbus_xfer = acpi_smbus_cmi_access,
+	.functionality = acpi_smbus_cmi_func,
+};
+
+
+static int acpi_smbus_cmi_add_cap(struct acpi_smbus_cmi *smbus_cmi,
+				  const char *name)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+
+	if (!strcmp(name, smbus_methods.mt_info)) {
+		status = acpi_evaluate_object(smbus_cmi->handle,
+					smbus_methods.mt_info,
+					NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR((AE_INFO, "Evaluating %s: %i",
+				   smbus_methods.mt_info, status));
+			return -EIO;
+		}
+
+		obj = buffer.pointer;
+		if (obj && obj->type == ACPI_TYPE_PACKAGE)
+			obj = obj->package.elements;
+		else {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			kfree(buffer.pointer);
+			return -EIO;
+		}
+
+		if (obj->type != ACPI_TYPE_INTEGER) {
+			ACPI_ERROR((AE_INFO, "Invalid argument type"));
+			kfree(buffer.pointer);
+			return -EIO;
+		} else
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO, "SMBus CMI Version %x"
+					  "\n", (int)obj->integer.value));
+
+		kfree(buffer.pointer);
+		smbus_cmi->cap_info = 1;
+	} else if (!strcmp(name, smbus_methods.mt_sbr))
+		smbus_cmi->cap_read = 1;
+	else if (!strcmp(name, smbus_methods.mt_sbw))
+		smbus_cmi->cap_write = 1;
+	else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported CMI method: %s\n",
+				 name));
+
+	return 0;
+}
+
+static acpi_status acpi_smbus_cmi_query_methods(acpi_handle handle, u32 level,
+			void *context, void **return_value)
+{
+	char node_name[5];
+	struct acpi_buffer buffer = { sizeof(node_name), node_name };
+	struct acpi_smbus_cmi *smbus_cmi = context;
+	acpi_status status;
+
+	status = acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+
+	if (ACPI_SUCCESS(status))
+		acpi_smbus_cmi_add_cap(smbus_cmi, node_name);
+
+	return AE_OK;
+}
+
+static int acpi_smbus_cmi_add(struct acpi_device *device)
+{
+	struct acpi_smbus_cmi *smbus_cmi;
+
+	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
+	if (!smbus_cmi)
+		return -ENOMEM;
+
+	smbus_cmi->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_SMBUS_HC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_SMBUS_HC_CLASS);
+	device->driver_data = smbus_cmi;
+	smbus_cmi->cap_info = 0;
+	smbus_cmi->cap_read = 0;
+	smbus_cmi->cap_write = 0;
+
+	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
+			    acpi_smbus_cmi_query_methods, smbus_cmi, NULL);
+
+	if (smbus_cmi->cap_info == 0)
+		goto err;
+
+	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
+		"SMBus CMI adapter %s (%s)",
+		acpi_device_name(device),
+		acpi_device_uid(device));
+	smbus_cmi->adapter.owner = THIS_MODULE;
+	smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
+	smbus_cmi->adapter.algo_data = smbus_cmi;
+	smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	smbus_cmi->adapter.dev.parent = &device->dev;
+
+	if (i2c_add_adapter(&smbus_cmi->adapter)) {
+		dev_err(&device->dev, "Couldn't register adapter!\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	kfree(smbus_cmi);
+	device->driver_data = NULL;
+	return -EIO;
+}
+
+static int acpi_smbus_cmi_remove(struct acpi_device *device, int type)
+{
+	struct acpi_smbus_cmi *smbus_cmi = acpi_driver_data(device);
+
+	i2c_del_adapter(&smbus_cmi->adapter);
+	kfree(smbus_cmi);
+	device->driver_data = NULL;
+
+	return 0;
+}
+
+static struct acpi_driver acpi_smbus_cmi_driver = {
+	.name = ACPI_SMBUS_HC_DEVICE_NAME,
+	.class = ACPI_SMBUS_HC_CLASS,
+	.ids = acpi_smbus_cmi_ids,
+	.ops = {
+		.add = acpi_smbus_cmi_add,
+		.remove = acpi_smbus_cmi_remove,
+	},
+};
+
+static int __init acpi_smbus_cmi_init(void)
+{
+	return acpi_bus_register_driver(&acpi_smbus_cmi_driver);
+}
+
+static void __exit acpi_smbus_cmi_exit(void)
+{
+	acpi_bus_unregister_driver(&acpi_smbus_cmi_driver);
+}
+
+module_init(acpi_smbus_cmi_init);
+module_exit(acpi_smbus_cmi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Crane Cai <crane.cai@amd.com>");
+MODULE_DESCRIPTION("ACPI SMBus CMI driver");
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 224aa12ee7c8..dd39c1eb03ed 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -32,10 +32,12 @@
 
 #define TAOS_STATE_INIT		0
 #define TAOS_STATE_IDLE		1
-#define TAOS_STATE_SEND		2
+#define TAOS_STATE_EOFF		2
 #define TAOS_STATE_RECV		3
 
 #define TAOS_CMD_RESET		0x12
+#define TAOS_CMD_ECHO_ON	'+'
+#define TAOS_CMD_ECHO_OFF	'-'
 
 static DECLARE_WAIT_QUEUE_HEAD(wq);
 
@@ -102,17 +104,9 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 
 	/* Send the transaction to the TAOS EVM */
 	dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
-	taos->pos = 0;
-	taos->state = TAOS_STATE_SEND;
-	serio_write(serio, taos->buffer[0]);
-	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
-					 msecs_to_jiffies(250));
-	if (taos->state != TAOS_STATE_IDLE) {
-		dev_err(&adapter->dev, "Transaction failed "
-			"(state=%d, pos=%d)\n", taos->state, taos->pos);
-		taos->addr = 0;
-		return -EIO;
-	}
+	for (p = taos->buffer; *p; p++)
+		serio_write(serio, *p);
+
 	taos->addr = addr;
 
 	/* Start the transaction and read the answer */
@@ -122,7 +116,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
 					 msecs_to_jiffies(150));
 	if (taos->state != TAOS_STATE_IDLE
-	 || taos->pos != 6) {
+	 || taos->pos != 5) {
 		dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
 			taos->pos);
 		return -EIO;
@@ -130,7 +124,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
 
 	/* Interpret the returned string */
-	p = taos->buffer + 2;
+	p = taos->buffer + 1;
 	p[3] = '\0';
 	if (!strcmp(p, "NAK"))
 		return -ENODEV;
@@ -173,13 +167,9 @@ static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
 			wake_up_interruptible(&wq);
 		}
 		break;
-	case TAOS_STATE_SEND:
-		if (taos->buffer[++taos->pos])
-			serio_write(serio, taos->buffer[taos->pos]);
-		else {
-			taos->state = TAOS_STATE_IDLE;
-			wake_up_interruptible(&wq);
-		}
+	case TAOS_STATE_EOFF:
+		taos->state = TAOS_STATE_IDLE;
+		wake_up_interruptible(&wq);
 		break;
 	case TAOS_STATE_RECV:
 		taos->buffer[taos->pos++] = data;
@@ -257,6 +247,19 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv)
 	}
 	strlcpy(adapter->name, name, sizeof(adapter->name));
 
+	/* Turn echo off for better performance */
+	taos->state = TAOS_STATE_EOFF;
+	serio_write(serio, TAOS_CMD_ECHO_OFF);
+
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(250));
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_err(&adapter->dev, "Echo off failed "
+			"(state=%d)\n", taos->state);
+		goto exit_close;
+	}
+
 	err = i2c_add_adapter(adapter);
 	if (err)
 		goto exit_close;
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 648ecc6f60e6..cf994bd01d9c 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -217,8 +217,10 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 	return;
 
  error:
-	dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg,
-		scx200_acb_state_name[iface->state]);
+	dev_err(&iface->adapter.dev,
+		"%s in state %s (addr=0x%02x, len=%d, status=0x%02x)\n", errmsg,
+		scx200_acb_state_name[iface->state], iface->address_byte,
+		iface->len, status);
 
 	iface->state = state_idle;
 	iface->result = -EIO;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 02d746c9c474..f9618f4d4e47 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,54 +16,6 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config SENSORS_PCF8574
-	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
-	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
-	default n
-	help
-	  If you say yes here you get support for Philips PCF8574 and 
-	  PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pcf8574.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pcf857x.c instead.
-
-	  These devices are hard to detect and rarely found on mainstream
-	  hardware.  If unsure, say N.
-
-config PCF8575
-	tristate "Philips PCF8575 (DEPRECATED)"
-	default n
-	depends on GPIO_PCF857X = "n"
-	help
-	  If you say yes here you get support for Philips PCF8575 chip.
-	  This chip is a 16-bit I/O expander for the I2C bus.  Several other
-	  chip manufacturers sell equivalent chips, e.g. Texas Instruments.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pcf8575.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pcf857x.c instead.
-
-	  This device is hard to detect and is rarely found on mainstream
-	  hardware.  If unsure, say N.
-
-config SENSORS_PCA9539
-	tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
-	depends on EXPERIMENTAL && GPIO_PCA953X = "n"
-	help
-	  If you say yes here you get support for the Philips PCA9539
-	  16-bit I/O port.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pca9539.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pca953x.c instead.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index f4680d16ee34..749cf3606294 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,9 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
-obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
-obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
deleted file mode 100644
index 270de4e56a81..000000000000
--- a/drivers/i2c/chips/pca9539.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
-    pca9539.c - 16-bit I/O port with interrupt and reset
-
-    Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/hwmon-sysfs.h>
-
-/* Addresses to scan: none, device is not autodetected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(pca9539);
-
-enum pca9539_cmd
-{
-	PCA9539_INPUT_0		= 0,
-	PCA9539_INPUT_1		= 1,
-	PCA9539_OUTPUT_0	= 2,
-	PCA9539_OUTPUT_1	= 3,
-	PCA9539_INVERT_0	= 4,
-	PCA9539_INVERT_1	= 5,
-	PCA9539_DIRECTION_0	= 6,
-	PCA9539_DIRECTION_1	= 7,
-};
-
-/* following are the sysfs callback functions */
-static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
-			    char *buf)
-{
-	struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
-	struct i2c_client *client = to_i2c_client(dev);
-	return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client,
-							     psa->index));
-}
-
-static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr,
-			     const char *buf, size_t count)
-{
-	struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
-	struct i2c_client *client = to_i2c_client(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 0);
-	if (val > 0xff)
-		return -EINVAL;
-	i2c_smbus_write_byte_data(client, psa->index, val);
-	return count;
-}
-
-/* Define the device attributes */
-
-#define PCA9539_ENTRY_RO(name, cmd_idx) \
-	static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx)
-
-#define PCA9539_ENTRY_RW(name, cmd_idx) \
-	static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \
-				  pca9539_store, cmd_idx)
-
-PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0);
-PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1);
-PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0);
-PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1);
-PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0);
-PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1);
-PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0);
-PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1);
-
-static struct attribute *pca9539_attributes[] = {
-	&sensor_dev_attr_input0.dev_attr.attr,
-	&sensor_dev_attr_input1.dev_attr.attr,
-	&sensor_dev_attr_output0.dev_attr.attr,
-	&sensor_dev_attr_output1.dev_attr.attr,
-	&sensor_dev_attr_invert0.dev_attr.attr,
-	&sensor_dev_attr_invert1.dev_attr.attr,
-	&sensor_dev_attr_direction0.dev_attr.attr,
-	&sensor_dev_attr_direction1.dev_attr.attr,
-	NULL
-};
-
-static struct attribute_group pca9539_defattr_group = {
-	.attrs = pca9539_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pca9539_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pca9539_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	/* Register sysfs hooks */
-	return sysfs_create_group(&client->dev.kobj,
-				  &pca9539_defattr_group);
-}
-
-static int pca9539_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
-	return 0;
-}
-
-static const struct i2c_device_id pca9539_id[] = {
-	{ "pca9539", 0 },
-	{ }
-};
-
-static struct i2c_driver pca9539_driver = {
-	.driver = {
-		.name	= "pca9539",
-	},
-	.probe		= pca9539_probe,
-	.remove		= pca9539_remove,
-	.id_table	= pca9539_id,
-
-	.detect		= pca9539_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pca9539_init(void)
-{
-	return i2c_add_driver(&pca9539_driver);
-}
-
-static void __exit pca9539_exit(void)
-{
-	i2c_del_driver(&pca9539_driver);
-}
-
-MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
-MODULE_DESCRIPTION("PCA9539 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pca9539_init);
-module_exit(pca9539_exit);
-
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
deleted file mode 100644
index 6ec309894c88..000000000000
--- a/drivers/i2c/chips/pcf8574.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
-    Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
-                        Philip Edelbrock <phil@netroedge.com>,
-                        Dan Eaton <dan.eaton@rocketlogix.com>
-    Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with 
-    the help of Jean Delvare <khali@linux-fr.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-    
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* A few notes about the PCF8574:
-
-* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
-  Philips Semiconductors.  It is designed to provide a byte I2C
-  interface to up to 8 separate devices.
-  
-* The PCF8574 appears as a very simple SMBus device which can be
-  read from or written to with SMBUS byte read/write accesses.
-
-  --Dan
-
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
-
-/* Each client has this additional data */
-struct pcf8574_data {
-	int write;			/* Remember last written value */
-};
-
-static void pcf8574_init_client(struct i2c_client *client);
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
-
-	if (data->write < 0)
-		return data->write;
-
-	return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
-			 size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct pcf8574_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-
-	if (val > 0xff)
-		return -EINVAL;
-
-	data->write = val;
-	i2c_smbus_write_byte(client, data->write);
-	return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8574_attributes[] = {
-	&dev_attr_read.attr,
-	&dev_attr_write.attr,
-	NULL
-};
-
-static const struct attribute_group pcf8574_attr_group = {
-	.attrs = pcf8574_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8574_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	const char *client_name;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
-
-	/* Now, we would do the remaining detection. But the PCF8574 is plainly
-	   impossible to detect! Stupid chip. */
-
-	/* Determine the chip type */
-	if (kind <= 0) {
-		if (client->addr >= 0x38 && client->addr <= 0x3f)
-			kind = pcf8574a;
-		else
-			kind = pcf8574;
-	}
-
-	if (kind == pcf8574a)
-		client_name = "pcf8574a";
-	else
-		client_name = "pcf8574";
-	strlcpy(info->type, client_name, I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pcf8574_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct pcf8574_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-
-	/* Initialize the PCF8574 chip */
-	pcf8574_init_client(client);
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
-	if (err)
-		goto exit_free;
-	return 0;
-
-      exit_free:
-	kfree(data);
-      exit:
-	return err;
-}
-
-static int pcf8574_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-/* Called when we have found a new PCF8574. */
-static void pcf8574_init_client(struct i2c_client *client)
-{
-	struct pcf8574_data *data = i2c_get_clientdata(client);
-	data->write = -EAGAIN;
-}
-
-static const struct i2c_device_id pcf8574_id[] = {
-	{ "pcf8574", 0 },
-	{ "pcf8574a", 0 },
-	{ }
-};
-
-static struct i2c_driver pcf8574_driver = {
-	.driver = {
-		.name	= "pcf8574",
-	},
-	.probe		= pcf8574_probe,
-	.remove		= pcf8574_remove,
-	.id_table	= pcf8574_id,
-
-	.detect		= pcf8574_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pcf8574_init(void)
-{
-	return i2c_add_driver(&pcf8574_driver);
-}
-
-static void __exit pcf8574_exit(void)
-{
-	i2c_del_driver(&pcf8574_driver);
-}
-
-
-MODULE_AUTHOR
-    ("Frodo Looijaard <frodol@dds.nl>, "
-     "Philip Edelbrock <phil@netroedge.com>, "
-     "Dan Eaton <dan.eaton@rocketlogix.com> "
-     "and Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_DESCRIPTION("PCF8574 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8574_init);
-module_exit(pcf8574_exit);
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
deleted file mode 100644
index 07fd7cb3c57d..000000000000
--- a/drivers/i2c/chips/pcf8575.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
-  pcf8575.c
-
-  About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus
-  produced by a.o. Philips Semiconductors.
-
-  Copyright (C) 2006 Michael Hennerich, Analog Devices Inc.
-  <hennerich@blackfin.uclinux.org>
-  Based on pcf8574.c.
-
-  Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>.
-  Ported this driver from ucLinux to the mainstream Linux kernel.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>  /* kzalloc() */
-#include <linux/sysfs.h> /* sysfs_create_group() */
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
-
-
-/* Each client has this additional data */
-struct pcf8575_data {
-	int write;		/* last written value, or error code */
-};
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr,
-			 char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	u16 val;
-	u8 iopin_state[2];
-
-	i2c_master_recv(client, iopin_state, 2);
-
-	val = iopin_state[0];
-	val |= iopin_state[1] << 8;
-
-	return sprintf(buf, "%u\n", val);
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct pcf8575_data *data = dev_get_drvdata(dev);
-	if (data->write < 0)
-		return data->write;
-	return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct pcf8575_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-	u8 iopin_state[2];
-
-	if (val > 0xffff)
-		return -EINVAL;
-
-	data->write = val;
-
-	iopin_state[0] = val & 0xFF;
-	iopin_state[1] = val >> 8;
-
-	i2c_master_send(client, iopin_state, 2);
-
-	return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8575_attributes[] = {
-	&dev_attr_read.attr,
-	&dev_attr_write.attr,
-	NULL
-};
-
-static const struct attribute_group pcf8575_attr_group = {
-	.attrs = pcf8575_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8575_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-		return -ENODEV;
-
-	/* This is the place to detect whether the chip at the specified
-	   address really is a PCF8575 chip. However, there is no method known
-	   to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
-
-	strlcpy(info->type, "pcf8575", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pcf8575_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct pcf8575_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-	data->write = -EAGAIN;
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
-	if (err)
-		goto exit_free;
-
-	return 0;
-
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int pcf8575_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-static const struct i2c_device_id pcf8575_id[] = {
-	{ "pcf8575", 0 },
-	{ }
-};
-
-static struct i2c_driver pcf8575_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "pcf8575",
-	},
-	.probe		= pcf8575_probe,
-	.remove		= pcf8575_remove,
-	.id_table	= pcf8575_id,
-
-	.detect		= pcf8575_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pcf8575_init(void)
-{
-	return i2c_add_driver(&pcf8575_driver);
-}
-
-static void __exit pcf8575_exit(void)
-{
-	i2c_del_driver(&pcf8575_driver);
-}
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, "
-	      "Bart Van Assche <bart.vanassche@gmail.com>");
-MODULE_DESCRIPTION("pcf8575 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8575_init);
-module_exit(pcf8575_exit);
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index b96f3025e588..aa96bd2d27ea 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -24,10 +24,9 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 
 #define TSL2550_DRV_NAME	"tsl2550"
-#define DRIVER_VERSION		"1.1.2"
+#define DRIVER_VERSION		"1.2"
 
 /*
  * Defines
@@ -96,32 +95,13 @@ static int tsl2550_set_power_state(struct i2c_client *client, int state)
 
 static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
 {
-	unsigned long end;
-	int loop = 0, ret = 0;
+	int ret;
 
-	/*
-	 * Read ADC channel waiting at most 400ms (see data sheet for further
-	 * info).
-	 * To avoid long busy wait we spin for few milliseconds then
-	 * start sleeping.
-	 */
-	end = jiffies + msecs_to_jiffies(400);
-	while (time_before(jiffies, end)) {
-		i2c_smbus_write_byte(client, cmd);
-
-		if (loop++ < 5)
-			mdelay(1);
-		else
-			msleep(1);
-
-		ret = i2c_smbus_read_byte(client);
-		if (ret < 0)
-			return ret;
-		else if (ret & 0x0080)
-			break;
-	}
+	ret = i2c_smbus_read_byte_data(client, cmd);
+	if (ret < 0)
+		return ret;
 	if (!(ret & 0x80))
-		return -EIO;
+		return -EAGAIN;
 	return ret & 0x7f;	/* remove the "valid" bit */
 }
 
@@ -285,8 +265,6 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 		return ret;
 	ch0 = ret;
 
-	mdelay(1);
-
 	ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
 	if (ret < 0)
 		return ret;
@@ -345,11 +323,10 @@ static int tsl2550_init_client(struct i2c_client *client)
 	 * Probe the chip. To do so we try to power up the device and then to
 	 * read back the 0x03 code
 	 */
-	err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+	err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP);
 	if (err < 0)
 		return err;
-	mdelay(1);
-	if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+	if (err != TSL2550_POWER_UP)
 		return -ENODEV;
 	data->power_state = 1;
 
@@ -374,7 +351,8 @@ static int __devinit tsl2550_probe(struct i2c_client *client,
 	struct tsl2550_data *data;
 	int *opmode, err = 0;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+					    | I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
 		err = -EIO;
 		goto exit;
 	}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0e45c296d3d2..8d80fceca6a4 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -46,6 +46,7 @@ static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
 static LIST_HEAD(userspace_devices);
 
+static struct device_type i2c_client_type;
 static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
@@ -64,9 +65,13 @@ static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
 
 static int i2c_device_match(struct device *dev, struct device_driver *drv)
 {
-	struct i2c_client	*client = to_i2c_client(dev);
-	struct i2c_driver	*driver = to_i2c_driver(drv);
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_driver	*driver;
+
+	if (!client)
+		return 0;
 
+	driver = to_i2c_driver(drv);
 	/* match on an id table if there is one */
 	if (driver->id_table)
 		return i2c_match_id(driver->id_table, client) != NULL;
@@ -94,10 +99,14 @@ static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 static int i2c_device_probe(struct device *dev)
 {
-	struct i2c_client	*client = to_i2c_client(dev);
-	struct i2c_driver	*driver = to_i2c_driver(dev->driver);
+	struct i2c_client	*client = i2c_verify_client(dev);
+	struct i2c_driver	*driver;
 	int status;
 
+	if (!client)
+		return 0;
+
+	driver = to_i2c_driver(dev->driver);
 	if (!driver->probe || !driver->id_table)
 		return -ENODEV;
 	client->driver = driver;
@@ -114,11 +123,11 @@ static int i2c_device_probe(struct device *dev)
 
 static int i2c_device_remove(struct device *dev)
 {
-	struct i2c_client	*client = to_i2c_client(dev);
+	struct i2c_client	*client = i2c_verify_client(dev);
 	struct i2c_driver	*driver;
 	int			status;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return 0;
 
 	driver = to_i2c_driver(dev->driver);
@@ -136,37 +145,40 @@ static int i2c_device_remove(struct device *dev)
 
 static void i2c_device_shutdown(struct device *dev)
 {
+	struct i2c_client *client = i2c_verify_client(dev);
 	struct i2c_driver *driver;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return;
 	driver = to_i2c_driver(dev->driver);
 	if (driver->shutdown)
-		driver->shutdown(to_i2c_client(dev));
+		driver->shutdown(client);
 }
 
 static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
 {
+	struct i2c_client *client = i2c_verify_client(dev);
 	struct i2c_driver *driver;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return 0;
 	driver = to_i2c_driver(dev->driver);
 	if (!driver->suspend)
 		return 0;
-	return driver->suspend(to_i2c_client(dev), mesg);
+	return driver->suspend(client, mesg);
 }
 
 static int i2c_device_resume(struct device *dev)
 {
+	struct i2c_client *client = i2c_verify_client(dev);
 	struct i2c_driver *driver;
 
-	if (!dev->driver)
+	if (!client || !dev->driver)
 		return 0;
 	driver = to_i2c_driver(dev->driver);
 	if (!driver->resume)
 		return 0;
-	return driver->resume(to_i2c_client(dev));
+	return driver->resume(client);
 }
 
 static void i2c_client_dev_release(struct device *dev)
@@ -175,10 +187,10 @@ static void i2c_client_dev_release(struct device *dev)
 }
 
 static ssize_t
-show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	return sprintf(buf, "%s\n", client->name);
+	return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
+		       to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
 }
 
 static ssize_t
@@ -188,18 +200,28 @@ show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
 	return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
 }
 
-static struct device_attribute i2c_dev_attrs[] = {
-	__ATTR(name, S_IRUGO, show_client_name, NULL),
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
+static struct attribute *i2c_dev_attrs[] = {
+	&dev_attr_name.attr,
 	/* modalias helps coldplug:  modprobe $(cat .../modalias) */
-	__ATTR(modalias, S_IRUGO, show_modalias, NULL),
-	{ },
+	&dev_attr_modalias.attr,
+	NULL
+};
+
+static struct attribute_group i2c_dev_attr_group = {
+	.attrs		= i2c_dev_attrs,
+};
+
+static const struct attribute_group *i2c_dev_attr_groups[] = {
+	&i2c_dev_attr_group,
+	NULL
 };
 
 struct bus_type i2c_bus_type = {
 	.name		= "i2c",
-	.dev_attrs	= i2c_dev_attrs,
 	.match		= i2c_device_match,
-	.uevent		= i2c_device_uevent,
 	.probe		= i2c_device_probe,
 	.remove		= i2c_device_remove,
 	.shutdown	= i2c_device_shutdown,
@@ -208,6 +230,12 @@ struct bus_type i2c_bus_type = {
 };
 EXPORT_SYMBOL_GPL(i2c_bus_type);
 
+static struct device_type i2c_client_type = {
+	.groups		= i2c_dev_attr_groups,
+	.uevent		= i2c_device_uevent,
+	.release	= i2c_client_dev_release,
+};
+
 
 /**
  * i2c_verify_client - return parameter as i2c_client, or NULL
@@ -220,7 +248,7 @@ EXPORT_SYMBOL_GPL(i2c_bus_type);
  */
 struct i2c_client *i2c_verify_client(struct device *dev)
 {
-	return (dev->bus == &i2c_bus_type)
+	return (dev->type == &i2c_client_type)
 			? to_i2c_client(dev)
 			: NULL;
 }
@@ -273,7 +301,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
-	client->dev.release = i2c_client_dev_release;
+	client->dev.type = &i2c_client_type;
 
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
 		     client->addr);
@@ -368,13 +396,6 @@ static void i2c_adapter_dev_release(struct device *dev)
 	complete(&adap->dev_released);
 }
 
-static ssize_t
-show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct i2c_adapter *adap = to_i2c_adapter(dev);
-	return sprintf(buf, "%s\n", adap->name);
-}
-
 /*
  * Let users instantiate I2C devices through sysfs. This can be used when
  * platform initialization code doesn't contain the proper data for
@@ -493,19 +514,34 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 	return res;
 }
 
-static struct device_attribute i2c_adapter_attrs[] = {
-	__ATTR(name, S_IRUGO, show_adapter_name, NULL),
-	__ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device),
-	__ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device),
-	{ },
+static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
+static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device);
+
+static struct attribute *i2c_adapter_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_new_device.attr,
+	&dev_attr_delete_device.attr,
+	NULL
 };
 
-static struct class i2c_adapter_class = {
-	.owner			= THIS_MODULE,
-	.name			= "i2c-adapter",
-	.dev_attrs		= i2c_adapter_attrs,
+static struct attribute_group i2c_adapter_attr_group = {
+	.attrs		= i2c_adapter_attrs,
 };
 
+static const struct attribute_group *i2c_adapter_attr_groups[] = {
+	&i2c_adapter_attr_group,
+	NULL
+};
+
+static struct device_type i2c_adapter_type = {
+	.groups		= i2c_adapter_attr_groups,
+	.release	= i2c_adapter_dev_release,
+};
+
+#ifdef CONFIG_I2C_COMPAT
+static struct class_compat *i2c_adapter_compat_class;
+#endif
+
 static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 {
 	struct i2c_devinfo	*devinfo;
@@ -555,14 +591,22 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		adap->timeout = HZ;
 
 	dev_set_name(&adap->dev, "i2c-%d", adap->nr);
-	adap->dev.release = &i2c_adapter_dev_release;
-	adap->dev.class = &i2c_adapter_class;
+	adap->dev.bus = &i2c_bus_type;
+	adap->dev.type = &i2c_adapter_type;
 	res = device_register(&adap->dev);
 	if (res)
 		goto out_list;
 
 	dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
 
+#ifdef CONFIG_I2C_COMPAT
+	res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
+				       adap->dev.parent);
+	if (res)
+		dev_warn(&adap->dev,
+			 "Failed to create compatibility class link\n");
+#endif
+
 	/* create pre-declared device nodes */
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
@@ -741,6 +785,11 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	   checking the returned value. */
 	res = device_for_each_child(&adap->dev, NULL, __unregister_client);
 
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
+				 adap->dev.parent);
+#endif
+
 	/* clean up the sysfs representation */
 	init_completion(&adap->dev_released);
 	device_unregister(&adap->dev);
@@ -768,9 +817,13 @@ EXPORT_SYMBOL(i2c_del_adapter);
 
 static int __attach_adapter(struct device *dev, void *data)
 {
-	struct i2c_adapter *adapter = to_i2c_adapter(dev);
+	struct i2c_adapter *adapter;
 	struct i2c_driver *driver = data;
 
+	if (dev->type != &i2c_adapter_type)
+		return 0;
+	adapter = to_i2c_adapter(dev);
+
 	i2c_detect(adapter, driver);
 
 	/* Legacy drivers scan i2c busses directly */
@@ -809,8 +862,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 	INIT_LIST_HEAD(&driver->clients);
 	/* Walk the adapters that are already present */
 	mutex_lock(&core_lock);
-	class_for_each_device(&i2c_adapter_class, NULL, driver,
-			      __attach_adapter);
+	bus_for_each_dev(&i2c_bus_type, NULL, driver, __attach_adapter);
 	mutex_unlock(&core_lock);
 
 	return 0;
@@ -819,10 +871,14 @@ EXPORT_SYMBOL(i2c_register_driver);
 
 static int __detach_adapter(struct device *dev, void *data)
 {
-	struct i2c_adapter *adapter = to_i2c_adapter(dev);
+	struct i2c_adapter *adapter;
 	struct i2c_driver *driver = data;
 	struct i2c_client *client, *_n;
 
+	if (dev->type != &i2c_adapter_type)
+		return 0;
+	adapter = to_i2c_adapter(dev);
+
 	/* Remove the devices we created ourselves as the result of hardware
 	 * probing (using a driver's detect method) */
 	list_for_each_entry_safe(client, _n, &driver->clients, detected) {
@@ -850,8 +906,7 @@ static int __detach_adapter(struct device *dev, void *data)
 void i2c_del_driver(struct i2c_driver *driver)
 {
 	mutex_lock(&core_lock);
-	class_for_each_device(&i2c_adapter_class, NULL, driver,
-			      __detach_adapter);
+	bus_for_each_dev(&i2c_bus_type, NULL, driver, __detach_adapter);
 	mutex_unlock(&core_lock);
 
 	driver_unregister(&driver->driver);
@@ -940,17 +995,23 @@ static int __init i2c_init(void)
 	retval = bus_register(&i2c_bus_type);
 	if (retval)
 		return retval;
-	retval = class_register(&i2c_adapter_class);
-	if (retval)
+#ifdef CONFIG_I2C_COMPAT
+	i2c_adapter_compat_class = class_compat_register("i2c-adapter");
+	if (!i2c_adapter_compat_class) {
+		retval = -ENOMEM;
 		goto bus_err;
+	}
+#endif
 	retval = i2c_add_driver(&dummy_driver);
 	if (retval)
 		goto class_err;
 	return 0;
 
 class_err:
-	class_unregister(&i2c_adapter_class);
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_unregister(i2c_adapter_compat_class);
 bus_err:
+#endif
 	bus_unregister(&i2c_bus_type);
 	return retval;
 }
@@ -958,7 +1019,9 @@ bus_err:
 static void __exit i2c_exit(void)
 {
 	i2c_del_driver(&dummy_driver);
-	class_unregister(&i2c_adapter_class);
+#ifdef CONFIG_I2C_COMPAT
+	class_compat_unregister(i2c_adapter_compat_class);
+#endif
 	bus_unregister(&i2c_bus_type);
 }
 
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index c9087de5c6c6..e844a0b18695 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -28,17 +28,6 @@
    identify a legacy client. If you don't need them, just don't set them. */
 
 /*
- * ---- Driver types -----------------------------------------------------
- */
-
-#define I2C_DRIVERID_MSP3400	 1
-#define I2C_DRIVERID_TUNER	 2
-#define I2C_DRIVERID_TDA7432	27	/* Stereo sound processor	*/
-#define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
-#define I2C_DRIVERID_SAA711X	73	/* saa711x video encoders	*/
-#define I2C_DRIVERID_INFRARED	75	/* I2C InfraRed on Video boards */
-
-/*
  * ---- Adapter types ----------------------------------------------------
  */
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index f4784c0fe975..57d41b0abce2 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -98,7 +98,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
 
 /**
  * struct i2c_driver - represent an I2C device driver
- * @id: Unique driver ID (optional)
  * @class: What kind of i2c device we instantiate (for detect)
  * @attach_adapter: Callback for bus addition (for legacy drivers)
  * @detach_adapter: Callback for bus removal (for legacy drivers)
@@ -135,7 +134,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
  * not allowed.
  */
 struct i2c_driver {
-	int id;
 	unsigned int class;
 
 	/* Notifies the driver that a new bus has appeared or is about to be
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3b6b788fe2b5..7803565aa877 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -543,6 +543,7 @@
 #define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
 #define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
 #define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
+#define PCI_DEVICE_ID_AMD_SB900_SMBUS	0x780b
 #define PCI_DEVICE_ID_AMD_CS5535_IDE    0x208F
 #define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
 #define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091