summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorVladimir Zapolskiy <vz@mleia.com>2015-11-20 03:05:10 +0200
committerVladimir Zapolskiy <vz@mleia.com>2016-02-11 02:24:53 +0200
commitc227f127e3b10b1de4c6b08eb73e0081f585fbe8 (patch)
treee84116b7d098498be4bba8e3192683d5af7ed9d3
parent92e963f50fc74041b5e9e744c330dca48e04f08d (diff)
downloadlinux-c227f127e3b10b1de4c6b08eb73e0081f585fbe8.tar.bz2
arm: lpc32xx: switch to common clock framework
The change switches NXP LPC32xx platforms to LPC32xx clock driver powered by common clock framework, this obsoletes mach-lpc32xx/clock.o legacy clock driver and thus it is removed. Legacy timer driver mach-lpc32xx/timer.o strictly depends on legacy clock support, but fortunately an existing LPC32xx clock source and clock event driver completely replaces it, and thus it can be removed as well. Noticeably platform UART driver directly operates on LPC32xx source control block registers, remove this dependency to avoid overlapping with common clock framework driver, also this guarantees that UART is working expectedly. Tested-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/mach-lpc32xx/Makefile3
-rw-r--r--arch/arm/mach-lpc32xx/clock.c1284
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c1
-rw-r--r--arch/arm/mach-lpc32xx/serial.c3
-rw-r--r--arch/arm/mach-lpc32xx/timer.c144
6 files changed, 3 insertions, 1435 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4f799e567fc8..948ae1938ade 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -527,7 +527,8 @@ config ARCH_LPC32XX
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
- select CLKSRC_MMIO
+ select CLKSRC_LPC32XX
+ select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_IDE
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index f5db805ab958..c70709ada692 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -2,7 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y := timer.o irq.o common.o serial.o clock.o
+obj-y := irq.o common.o serial.o
obj-y += pm.o suspend.o
obj-y += phy3250.o
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 661c8f4b2310..000000000000
--- a/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- * 32KHz oscillator*
- * / | \
- * RTC* PLL397^ TOUCH
- * /
- * Main oscillator^ /
- * | \ /
- * | SYSCLK&
- * | \
- * | \
- * USB_PLL HCLK_PLL&
- * | | |
- * USB host/device PCLK& |
- * | |
- * Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- * clk_enable() and clk_disable() functions unless SYSCLK is based
- * on that clock. This allows the other oscillator that isn't driving
- * the HCLK PLL to be used as another system clock that can be routed
- * to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- * this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- * will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
- /*
- * If a clock has a rate of 0, then it inherits it's parent
- * clock rate
- */
- while (clk->rate == 0)
- clk = clk->parent;
-
- return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
- .rate = LPC32XX_CLOCK_OSC_FREQ,
- .get_rate = local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
- u32 reg;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
- reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
- if (enable == 0) {
- reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
- __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
- } else {
- /* Enable PLL397 */
- reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
- __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
- /* Wait for PLL397 lock */
- while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
- LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
- time_before(jiffies, timeout))
- cpu_relax();
-
- if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
- LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
- u32 reg;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
- reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
- if (enable == 0) {
- reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
- __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
- } else {
- /* Enable main oscillator */
- reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
- __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
- /* Wait for main oscillator to start */
- while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
- LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
- time_before(jiffies, timeout))
- cpu_relax();
-
- if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
- LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static struct clk osc_pll397 = {
- .parent = &osc_32KHz,
- .enable = local_pll397_enable,
- .rate = LPC32XX_CLOCK_OSC_FREQ * 397,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk osc_main = {
- .enable = local_oscmain_enable,
- .rate = LPC32XX_MAIN_OSC_FREQ,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
- struct clk_pll_setup pllcfg;
-
- pllcfg.cco_bypass_b15 = 0;
- pllcfg.direct_output_b14 = 0;
- pllcfg.fdbk_div_ctrl_b13 = 0;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
- pllcfg.cco_bypass_b15 = 1;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
- pllcfg.direct_output_b14 = 1;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
- pllcfg.fdbk_div_ctrl_b13 = 1;
- pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
- pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
- pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
- return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
- u32 tv, tmp = 0;
-
- if (PllSetup->analog_on != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
- if (PllSetup->cco_bypass_b15 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
- if (PllSetup->direct_output_b14 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
- if (PllSetup->fdbk_div_ctrl_b13 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
- tv = ffs(PllSetup->pll_p) - 1;
- if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
- return 0;
-
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
- tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
- tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
- return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
- u32 clkin, pllreg;
-
- clkin = clk_armpll.parent->rate;
- pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
- clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
- struct clk_pll_setup *pllsetup)
-{
- u32 ifreq, freqtol, m, n, p, fclkout;
-
- /* Determine frequency tolerance limits */
- freqtol = target_freq / 250;
- ifreq = pllin_freq;
-
- /* Is direct bypass mode possible? */
- if (abs(pllin_freq - target_freq) <= freqtol) {
- pllsetup->analog_on = 0;
- pllsetup->cco_bypass_b15 = 1;
- pllsetup->direct_output_b14 = 1;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- pllsetup->pll_p = pll_postdivs[0];
- pllsetup->pll_n = 1;
- pllsetup->pll_m = 1;
- return clk_check_pll_setup(ifreq, pllsetup);
- } else if (target_freq <= ifreq) {
- pllsetup->analog_on = 0;
- pllsetup->cco_bypass_b15 = 1;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- pllsetup->pll_n = 1;
- pllsetup->pll_m = 1;
- for (p = 0; p <= 3; p++) {
- pllsetup->pll_p = pll_postdivs[p];
- fclkout = clk_check_pll_setup(ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
-
- /* Is direct mode possible? */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 1;
- pllsetup->fdbk_div_ctrl_b13 = 0;
- pllsetup->pll_p = pll_postdivs[0];
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- /* Compute output frequency for this value */
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(ifreq,
- pllsetup);
- if (abs(target_freq - fclkout) <=
- freqtol)
- return fclkout;
- }
- }
-
- /* Is integer mode possible? */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- for (p = 0; p < 4; p++) {
- /* Compute output frequency */
- pllsetup->pll_p = pll_postdivs[p];
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(
- ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
- }
-
- /* Try non-integer mode */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 0;
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- for (p = 0; p < 4; p++) {
- /* Compute output frequency */
- pllsetup->pll_p = pll_postdivs[p];
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(
- ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
- }
-
- return 0;
-}
-
-static struct clk clk_armpll = {
- .parent = &clk_sys,
- .get_rate = local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
- u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
- reg |= tmp;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- return clk_check_pll_setup(clk_usbpll.parent->rate,
- pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
- u32 reg;
- int ret = 0;
- unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
- __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
- LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
- LPC32XX_CLKPWR_USB_CTRL);
- __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
- LPC32XX_CLKPWR_USB_CTRL);
-
- if (enable && usb_pll_valid && usb_pll_enable) {
- ret = -ENODEV;
- /*
- * If the PLL rate has been previously set, then the rate
- * in the PLL register is valid and can be enabled here.
- * Otherwise, it needs to be enabled as part of setrate.
- */
-
- /*
- * Gate clock into PLL
- */
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- /*
- * Enable PLL
- */
- reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- /*
- * Wait for PLL to lock
- */
- while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
- ret = 0;
- else
- udelay(10);
- }
-
- /*
- * Gate clock from PLL if PLL is locked
- */
- if (ret == 0) {
- __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
- LPC32XX_CLKPWR_USB_CTRL);
- } else {
- __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
- LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
- LPC32XX_CLKPWR_USB_CTRL);
- }
- } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) {
- usb_pll_valid = 0;
- usb_pll_enable = 0;
- }
-
- return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 clkin, usbdiv;
- struct clk_pll_setup pllsetup;
-
- /*
- * Unlike other clocks, this clock has a KHz input rate, so bump
- * it up to work with the PLL function
- */
- rate = rate * 1000;
-
- clkin = clk->get_rate(clk);
- usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
- LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
- clkin = clkin / usbdiv;
-
- /* Try to find a good rate setup */
- if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
- return 0;
-
- return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -ENODEV;
- u32 clkin, usbdiv;
- struct clk_pll_setup pllsetup;
-
- /*
- * Unlike other clocks, this clock has a KHz input rate, so bump
- * it up to work with the PLL function
- */
- rate = rate * 1000;
-
- clkin = clk->get_rate(clk->parent);
- usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
- LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
- clkin = clkin / usbdiv;
-
- /* Try to find a good rate setup */
- if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
- return -EINVAL;
-
- /*
- * Disable PLL clocks during PLL change
- */
- local_usbpll_enable(clk, 0);
- pllsetup.analog_on = 0;
- local_clk_usbpll_setup(&pllsetup);
-
- /*
- * Start USB PLL and check PLL status
- */
-
- usb_pll_valid = 1;
- usb_pll_enable = 1;
-
- ret = local_usbpll_enable(clk, 1);
- if (ret >= 0)
- clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
- return ret;
-}
-
-static struct clk clk_usbpll = {
- .parent = &osc_main,
- .set_rate = local_usbpll_set_rate,
- .enable = local_usbpll_enable,
- .rate = 48000, /* In KHz */
- .get_rate = local_return_parent_rate,
- .round_rate = local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
- static const u32 hclkdivs[4] = {1, 2, 4, 4};
- return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
- __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
- .parent = &clk_armpll,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
- .parent = &clk_armpll,
- .get_rate = local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- tmp = __raw_readl(clk->enable_reg);
-
- if (enable == 0)
- tmp &= ~clk->enable_mask;
- else
- tmp |= clk->enable_mask;
-
- __raw_writel(tmp, clk->enable_reg);
-
- return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_mpwm = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_wdt = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL,
- .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_dma = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_pwm = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
- LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
- LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
- LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
- LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
- LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4),
- .enable_mask = 0x4,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
- .parent = &osc_32KHz,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
- LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_nand_mlc = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
- LPC32XX_CLKPWR_NANDCLK_DMA_INT |
- LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
- LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_net = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL,
- .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
- LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
- LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
- .parent = &osc_32KHz,
- .rate = 1, /* 1 Hz */
- .get_rate = local_return_parent_rate,
-};
-
-static int local_usb_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- if (enable) {
- /* Set up I2C pull levels */
- tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
- tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
- __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
- }
-
- return local_onoff_enable(clk, enable);
-}
-
-static struct clk clk_usbd = {
- .parent = &clk_usbpll,
- .enable = local_usb_enable,
- .enable_reg = LPC32XX_CLKPWR_USB_CTRL,
- .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \
- LPC32XX_USB_OTG_I2C_CLOCK_ON)
-
-static int local_usb_otg_enable(struct clk *clk, int enable)
-{
- int to = 1000;
-
- if (enable) {
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
- clk->enable_mask) != clk->enable_mask) && (to > 0))
- to--;
- } else {
- __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
-
- while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
- OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
- to--;
- }
-
- if (to)
- return 0;
- else
- return -1;
-}
-
-static struct clk clk_usb_otg_dev = {
- .parent = &clk_usbpll,
- .enable = local_usb_otg_enable,
- .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
- .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
- LPC32XX_USB_OTG_OTG_CLOCK_ON |
- LPC32XX_USB_OTG_DEV_CLOCK_ON |
- LPC32XX_USB_OTG_I2C_CLOCK_ON,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_usb_otg_host = {
- .parent = &clk_usbpll,
- .enable = local_usb_otg_enable,
- .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
- .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
- LPC32XX_USB_OTG_OTG_CLOCK_ON |
- LPC32XX_USB_OTG_HOST_CLOCK_ON |
- LPC32XX_USB_OTG_I2C_CLOCK_ON,
- .get_rate = local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- /* Make sure 32KHz clock is the selected clock */
- tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
- tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
- __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
- if (enable == 0)
- __raw_writel(0, clk->enable_reg);
- else
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- return 0;
-}
-
-static struct clk clk_tsc = {
- .parent = &osc_32KHz,
- .enable = tsc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
- u32 divider;
-
- /* Use PERIPH_CLOCK */
- tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
- tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
- /*
- * Set clock divider so that we have equal to or less than
- * 4.5MHz clock at ADC
- */
- divider = clk->get_rate(clk) / 4500000 + 1;
- tmp |= divider;
- __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
- /* synchronize rate of this clock w/ actual HW setting */
- clk->rate = clk->get_rate(clk->parent) / divider;
-
- if (enable == 0)
- __raw_writel(0, clk->enable_reg);
- else
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- return 0;
-}
-
-static struct clk clk_adc = {
- .parent = &clk_pclk,
- .enable = adc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
- ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
-
- /* If rate is 0, disable clock */
- if (enable != 0)
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
-
- __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
- return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
- u32 div, rate, oldclk;
-
- /* The MMC clock must be on when accessing an MMC register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
- LPC32XX_CLKPWR_MS_CTRL);
- div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
- /* Get the parent clock rate */
- rate = clk->parent->get_rate(clk->parent);
-
- /* Get the MMC controller clock divider value */
- div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
- if (!div)
- div = 1;
-
- return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long div, prate;
-
- /* Get the parent clock rate */
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate >= prate)
- return prate;
-
- div = prate / rate;
- if (div > 0xf)
- div = 0xf;
-
- return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 tmp;
- unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
- prate = clk->parent->get_rate(clk->parent);
-
- div = prate / crate;
-
- /* The MMC clock must be on when accessing an MMC register */
- tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
- ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
- LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
- __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
- return 0;
-}
-
-static struct clk clk_mmc = {
- .parent = &clk_armpll,
- .set_rate = mmc_set_rate,
- .get_rate = mmc_get_rate,
- .round_rate = mmc_round_rate,
- .enable = mmc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_MS_CTRL,
- .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
- u32 tmp, div, rate, oldclk;
-
- /* The LCD clock must be on when accessing an LCD register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
- LPC32XX_CLKPWR_LCDCLK_CTRL);
- tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
- __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- rate = clk->parent->get_rate(clk->parent);
-
- /* Only supports internal clocking */
- if (tmp & TIM2_BCD)
- return rate;
-
- div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
- tmp = rate / (2 + div);
-
- return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 tmp, prate, div, oldclk;
-
- /* The LCD clock must be on when accessing an LCD register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
- LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate < prate) {
- /* Find closest divider */
- div = prate / rate;
- if (div >= 2) {
- div -= 2;
- tmp &= ~TIM2_BCD;
- }
-
- tmp &= ~(0xF800001F);
- tmp |= (div & 0x1F);
- tmp |= (((div >> 5) & 0x1F) << 27);
- }
-
- __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
- __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 prate, div;
-
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate >= prate)
- rate = prate;
- else {
- div = prate / rate;
- if (div > 0x3ff)
- div = 0x3ff;
-
- rate = prate / div;
- }
-
- return rate;
-}
-
-static struct clk clk_lcd = {
- .parent = &clk_hclk,
- .set_rate = clcd_set_rate,
- .get_rate = clcd_get_rate,
- .round_rate = clcd_round_rate,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
- /* Don't attempt to disable clock if it has no users */
- if (clk->usecount > 0) {
- clk->usecount--;
-
- /* Only disable clock when it has no more users */
- if ((clk->usecount == 0) && (clk->enable))
- clk->enable(clk, 0);
-
- /* Check parent clocks, they may need to be disabled too */
- if (clk->parent)
- local_clk_disable(clk->parent);
- }
-}
-
-static int local_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- /* Enable parent clocks first and update use counts */
- if (clk->parent)
- ret = local_clk_enable(clk->parent);
-
- if (!ret) {
- /* Only enable clock if it's currently disabled */
- if ((clk->usecount == 0) && (clk->enable))
- ret = clk->enable(clk, 1);
-
- if (!ret)
- clk->usecount++;
- else if (clk->parent)
- local_clk_disable(clk->parent);
- }
-
- return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&global_clkregs_lock, flags);
- ret = local_clk_enable(clk);
- spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&global_clkregs_lock, flags);
- local_clk_disable(clk);
- spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- /*
- * Most system clocks can only be enabled or disabled, with
- * the actual rate set as part of the peripheral dividers
- * instead of high level clock control
- */
- if (clk->set_rate)
- ret = clk->set_rate(clk, rate);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->round_rate)
- rate = clk->round_rate(clk, rate);
- else
- rate = clk->get_rate(clk);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- /* Clock re-parenting is not supported */
- return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static struct clk_lookup lookups[] = {
- CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
- CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
- CLKDEV_INIT(NULL, "osc_main", &osc_main),
- CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
- CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
- CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
- CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
- CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
- CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
- CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
- CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
- CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
- CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
- CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
- CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
- CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
- CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
- CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
- CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
- CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
- CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
- CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
- CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
- CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
- CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
- CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
- CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
- CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
- CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
- CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
- CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
- CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
- CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
- CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
- CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
- CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
- CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
- CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
- CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
- CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
- CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
-};
-
-static int __init clk_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /*
- * Setup muxed SYSCLK for HCLK PLL base -this selects the
- * parent clock used for the ARM PLL and is used to derive
- * the many system clock rates in the device.
- */
- if (clk_is_sysclk_mainosc() != 0)
- clk_sys.parent = &osc_main;
- else
- clk_sys.parent = &osc_pll397;
-
- clk_sys.rate = clk_sys.parent->rate;
-
- /* Compute the current ARM PLL and USB PLL frequencies */
- local_update_armpll_rate();
-
- /* Compute HCLK and PCLK bus rates */
- clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
- clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
- /*
- * Enable system clocks - this step is somewhat formal, as the
- * clocks are already running, but it does get the clock data
- * inline with the actual system state. Never disable these
- * clocks as they will only stop if the system is going to sleep.
- * In that case, the chip/system power management functions will
- * handle clock gating.
- */
- if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
- printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
- /*
- * Timers 0 and 1 were enabled and are being used by the high
- * resolution tick function prior to this driver being initialized.
- * Tag them now as used.
- */
- if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
- printk(KERN_ERR "Error enabling timer tick clocks\n");
-
- return 0;
-}
-core_initcall(clk_init);
-
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 77d6b1bab278..60f33921dff4 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -260,7 +260,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
- .init_time = lpc32xx_timer_init,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
.restart = lpc23xx_restart,
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 05621a29fba2..1931229a1eaa 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void)
unsigned int puart;
int i, j;
- /* UART clocks are off, let clock driver manage them */
- __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
-
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
deleted file mode 100644
index ff3499d1fb1a..000000000000
--- a/arch/arm/mach-lpc32xx/timer.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/timer.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009 - 2010 NXP Semiconductors
- * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
- * Ed Schouten <e.schouten@fontys.nl>
- * Laurens Timmermans <l.timmermans@fontys.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/err.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-static int lpc32xx_clkevt_next_event(unsigned long delta,
- struct clock_event_device *dev)
-{
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-
- return 0;
-}
-
-static int lpc32xx_shutdown(struct clock_event_device *evt)
-{
- /*
- * Disable the timer. When using oneshot, we must also
- * disable the timer to wait for the first call to
- * set_next_event().
- */
- __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- return 0;
-}
-
-static struct clock_event_device lpc32xx_clkevt = {
- .name = "lpc32xx_clkevt",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = lpc32xx_clkevt_next_event,
- .set_state_shutdown = lpc32xx_shutdown,
- .set_state_oneshot = lpc32xx_shutdown,
-};
-
-static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &lpc32xx_clkevt;
-
- /* Clear match */
- __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
- LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction lpc32xx_timer_irq = {
- .name = "LPC32XX Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = lpc32xx_timer_interrupt,
-};
-
-/*
- * The clock management driver isn't initialized at this point, so the
- * clocks need to be enabled here manually and then tagged as used in
- * the clock driver initialization
- */
-void __init lpc32xx_timer_init(void)
-{
- u32 clkrate, pllreg;
-
- /* Enable timer clock */
- __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
- LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
- LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
-
- /*
- * The clock driver isn't initialized at this point. So determine if
- * the SYSCLK is driven from the PLL397 or main oscillator and then use
- * it to compute the PLL frequency and the PCLK divider to get the base
- * timer rates. This rate is needed to compute the tick rate.
- */
- if (clk_is_sysclk_mainosc() != 0)
- clkrate = LPC32XX_MAIN_OSC_FREQ;
- else
- clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
-
- /* Get ARM HCLKPLL register and convert it into a frequency */
- pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
- clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
-
- /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
- clkrate = clkrate / clk_get_pclk_div();
-
- /* Initial timer setup */
- __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
- LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
- __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
- LPC32XX_TIMER_CNTR_MCR_STOP(0) |
- LPC32XX_TIMER_CNTR_MCR_RESET(0),
- LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
-
- /* Setup tick interrupt */
- setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
-
- /* Setup the clockevent structure. */
- lpc32xx_clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
-
- /* Use timer1 as clock source. */
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
- clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
- "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
-}