diff options
author | Stefan Wahren <stefan.wahren@i2se.com> | 2017-08-06 17:52:02 +0200 |
---|---|---|
committer | Florian Fainelli <f.fainelli@gmail.com> | 2017-09-25 11:52:26 -0700 |
commit | 88bbe85dcd37aa2662c1a83962c15009fc12503e (patch) | |
tree | fd805241038275a14c8050d26e3201e8ed7c73be | |
parent | 1d66af81905a4e2f3d03913f5449a8e9b5d3facd (diff) | |
download | linux-88bbe85dcd37aa2662c1a83962c15009fc12503e.tar.bz2 |
irqchip: bcm2836: Move SMP startup code to arch/arm (v2)
In order to easily provide SMP for BCM2837 on 32-bit and 64-bit
the SMP startup code was placed in irq-bcm2836. That's not the
right approach. So move this code where it belongs.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836")
Tested-by: Eric Anholt <eric@anholt.net>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
-rw-r--r-- | arch/arm/mach-bcm/Makefile | 5 | ||||
-rw-r--r-- | arch/arm/mach-bcm/board_bcm2835.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-bcm/platsmp.c | 35 | ||||
-rw-r--r-- | arch/arm/mach-bcm/platsmp.h | 10 | ||||
-rw-r--r-- | drivers/irqchip/irq-bcm2836.c | 79 | ||||
-rw-r--r-- | include/linux/irqchip/irq-bcm2836.h | 70 |
6 files changed, 127 insertions, 78 deletions
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 980f5850097c..62a59008c5a8 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -43,6 +43,11 @@ endif # BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o +ifeq ($(CONFIG_ARCH_BCM2835),y) +ifeq ($(CONFIG_ARM),y) +obj-$(CONFIG_SMP) += platsmp.o +endif +endif # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 24af33f91705..8cff865ace04 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -19,16 +19,20 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "platsmp.h" + static const char * const bcm2835_compat[] = { #ifdef CONFIG_ARCH_MULTI_V6 "brcm,bcm2835", #endif #ifdef CONFIG_ARCH_MULTI_V7 "brcm,bcm2836", + "brcm,bcm2837", #endif NULL }; DT_MACHINE_START(BCM2835, "BCM2835") - .dt_compat = bcm2835_compat + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), MACHINE_END diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 9e3f275934eb..34506a608fea 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irqchip/irq-bcm2836.h> #include <linux/jiffies.h> #include <linux/of.h> #include <linux/of_address.h> @@ -287,6 +288,35 @@ out: return ret; } +static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *intc_base; + struct device_node *dn; + char *name; + + name = "brcm,bcm2836-l1-intc"; + dn = of_find_compatible_node(NULL, NULL, name); + if (!dn) { + pr_err("unable to find intc node\n"); + return -ENODEV; + } + + intc_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!intc_base) { + pr_err("unable to remap intc base register\n"); + return -ENOMEM; + } + + writel(virt_to_phys(secondary_startup), + intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu); + + iounmap(intc_base); + + return 0; +} + static const struct smp_operations kona_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = kona_boot_secondary, @@ -305,3 +335,8 @@ static const struct smp_operations nsp_smp_ops __initconst = { .smp_boot_secondary = nsp_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops); + +const struct smp_operations bcm2836_smp_ops __initconst = { + .smp_boot_secondary = bcm2836_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops); diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h new file mode 100644 index 000000000000..b8b8b3fa350d --- /dev/null +++ b/arch/arm/mach-bcm/platsmp.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + */ + +extern const struct smp_operations bcm2836_smp_ops; diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c index dc8c1e3eafe7..667b9e14b032 100644 --- a/drivers/irqchip/irq-bcm2836.c +++ b/drivers/irqchip/irq-bcm2836.c @@ -19,62 +19,9 @@ #include <linux/of_irq.h> #include <linux/irqchip.h> #include <linux/irqdomain.h> -#include <asm/exception.h> - -#define LOCAL_CONTROL 0x000 -#define LOCAL_PRESCALER 0x008 +#include <linux/irqchip/irq-bcm2836.h> -/* - * The low 2 bits identify the CPU that the GPU IRQ goes to, and the - * next 2 bits identify the CPU that the GPU FIQ goes to. - */ -#define LOCAL_GPU_ROUTING 0x00c -/* When setting bits 0-3, enables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_SET 0x010 -/* When setting bits 0-3, disables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_CLR 0x014 -/* - * The low 4 bits of this are the CPU's timer IRQ enables, and the - * next 4 bits are the CPU's timer FIQ enables (which override the IRQ - * bits). - */ -#define LOCAL_TIMER_INT_CONTROL0 0x040 -/* - * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and - * the next 4 bits are the CPU's per-mailbox FIQ enables (which - * override the IRQ bits). - */ -#define LOCAL_MAILBOX_INT_CONTROL0 0x050 -/* - * The CPU's interrupt status register. Bits are defined by the the - * LOCAL_IRQ_* bits below. - */ -#define LOCAL_IRQ_PENDING0 0x060 -/* Same status bits as above, but for FIQ. */ -#define LOCAL_FIQ_PENDING0 0x070 -/* - * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and - * these bits are organized by mailbox number and then CPU number. We - * use mailbox 0 for IPIs. The mailbox's interrupt is raised while - * any bit is set. - */ -#define LOCAL_MAILBOX0_SET0 0x080 -#define LOCAL_MAILBOX3_SET0 0x08c -/* Mailbox write-to-clear bits. */ -#define LOCAL_MAILBOX0_CLR0 0x0c0 -#define LOCAL_MAILBOX3_CLR0 0x0cc - -#define LOCAL_IRQ_CNTPSIRQ 0 -#define LOCAL_IRQ_CNTPNSIRQ 1 -#define LOCAL_IRQ_CNTHPIRQ 2 -#define LOCAL_IRQ_CNTVIRQ 3 -#define LOCAL_IRQ_MAILBOX0 4 -#define LOCAL_IRQ_MAILBOX1 5 -#define LOCAL_IRQ_MAILBOX2 6 -#define LOCAL_IRQ_MAILBOX3 7 -#define LOCAL_IRQ_GPU_FAST 8 -#define LOCAL_IRQ_PMU_FAST 9 -#define LAST_IRQ LOCAL_IRQ_PMU_FAST +#include <asm/exception.h> struct bcm2836_arm_irqchip_intc { struct irq_domain *domain; @@ -215,24 +162,6 @@ static int bcm2836_cpu_dying(unsigned int cpu) cpu); return 0; } - -#ifdef CONFIG_ARM -static int __init bcm2836_smp_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - unsigned long secondary_startup_phys = - (unsigned long)virt_to_phys((void *)secondary_startup); - - writel(secondary_startup_phys, - intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu); - - return 0; -} - -static const struct smp_operations bcm2836_smp_ops __initconst = { - .smp_boot_secondary = bcm2836_smp_boot_secondary, -}; -#endif #endif static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = { @@ -249,10 +178,6 @@ bcm2836_arm_irqchip_smp_init(void) bcm2836_cpu_dying); set_smp_cross_call(bcm2836_arm_irqchip_send_ipi); - -#ifdef CONFIG_ARM - smp_set_ops(&bcm2836_smp_ops); -#endif #endif } diff --git a/include/linux/irqchip/irq-bcm2836.h b/include/linux/irqchip/irq-bcm2836.h new file mode 100644 index 000000000000..218a6e1b18d8 --- /dev/null +++ b/include/linux/irqchip/irq-bcm2836.h @@ -0,0 +1,70 @@ +/* + * Root interrupt controller for the BCM2836 (Raspberry Pi 2). + * + * Copyright 2015 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define LOCAL_CONTROL 0x000 +#define LOCAL_PRESCALER 0x008 + +/* + * The low 2 bits identify the CPU that the GPU IRQ goes to, and the + * next 2 bits identify the CPU that the GPU FIQ goes to. + */ +#define LOCAL_GPU_ROUTING 0x00c +/* When setting bits 0-3, enables PMU interrupts on that CPU. */ +#define LOCAL_PM_ROUTING_SET 0x010 +/* When setting bits 0-3, disables PMU interrupts on that CPU. */ +#define LOCAL_PM_ROUTING_CLR 0x014 +/* + * The low 4 bits of this are the CPU's timer IRQ enables, and the + * next 4 bits are the CPU's timer FIQ enables (which override the IRQ + * bits). + */ +#define LOCAL_TIMER_INT_CONTROL0 0x040 +/* + * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and + * the next 4 bits are the CPU's per-mailbox FIQ enables (which + * override the IRQ bits). + */ +#define LOCAL_MAILBOX_INT_CONTROL0 0x050 +/* + * The CPU's interrupt status register. Bits are defined by the the + * LOCAL_IRQ_* bits below. + */ +#define LOCAL_IRQ_PENDING0 0x060 +/* Same status bits as above, but for FIQ. */ +#define LOCAL_FIQ_PENDING0 0x070 +/* + * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and + * these bits are organized by mailbox number and then CPU number. We + * use mailbox 0 for IPIs. The mailbox's interrupt is raised while + * any bit is set. + */ +#define LOCAL_MAILBOX0_SET0 0x080 +#define LOCAL_MAILBOX3_SET0 0x08c +/* Mailbox write-to-clear bits. */ +#define LOCAL_MAILBOX0_CLR0 0x0c0 +#define LOCAL_MAILBOX3_CLR0 0x0cc + +#define LOCAL_IRQ_CNTPSIRQ 0 +#define LOCAL_IRQ_CNTPNSIRQ 1 +#define LOCAL_IRQ_CNTHPIRQ 2 +#define LOCAL_IRQ_CNTVIRQ 3 +#define LOCAL_IRQ_MAILBOX0 4 +#define LOCAL_IRQ_MAILBOX1 5 +#define LOCAL_IRQ_MAILBOX2 6 +#define LOCAL_IRQ_MAILBOX3 7 +#define LOCAL_IRQ_GPU_FAST 8 +#define LOCAL_IRQ_PMU_FAST 9 +#define LAST_IRQ LOCAL_IRQ_PMU_FAST |