summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2018-03-09 17:20:23 +0100
committerArnd Bergmann <arnd@arndb.de>2018-03-26 15:56:35 +0200
commit64f5fdd951d5e1558d355aefbe661739eef0c8e4 (patch)
treeaa0108b08470e86af39615dd12bdda3a5d4be79f
parent315e80e7fb25b46bf1c155a96a264d79b1c1d6f4 (diff)
downloadlinux-64f5fdd951d5e1558d355aefbe661739eef0c8e4.tar.bz2
char: remove blackfin OTP driver
The blackfin architecture is getting removed, so we don't need this driver any more. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-rw-r--r--drivers/char/Kconfig28
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/bfin-otp.c237
3 files changed, 0 insertions, 266 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index c9c3c2028b0b..40947a796666 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,34 +66,6 @@ config TTY_PRINTK
If unsure, say N.
-config BFIN_OTP
- tristate "Blackfin On-Chip OTP Memory Support"
- depends on BLACKFIN && (BF51x || BF52x || BF54x)
- default y
- help
- If you say Y here, you will get support for a character device
- interface into the One Time Programmable memory pages that are
- stored on the Blackfin processor. This will not get you access
- to the secure memory pages however. You will need to write your
- own secure code and reader for that.
-
- To compile this driver as a module, choose M here: the module
- will be called bfin-otp.
-
- If unsure, it is safe to say Y.
-
-config BFIN_OTP_WRITE_ENABLE
- bool "Enable writing support of OTP pages"
- depends on BFIN_OTP
- default n
- help
- If you say Y here, you will enable support for writing of the
- OTP pages. This is dangerous by nature as you can only program
- the pages once, so only enable this option when you actually
- need it so as to not inadvertently clobber data.
-
- If unsure, say N.
-
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 49b7bd84fa20..c97c768cd1dd 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_IBM_BSR) += bsr.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
-obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
obj-$(CONFIG_PRINTER) += lp.o
diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c
deleted file mode 100644
index 0584025bb0c2..000000000000
--- a/drivers/char/bfin-otp.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Blackfin On-Chip OTP Memory Interface
- *
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/types.h>
-#include <mtd/mtd-abi.h>
-
-#include <asm/blackfin.h>
-#include <asm/bfrom.h>
-#include <linux/uaccess.h>
-
-#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
-#define stampit() stamp("here i am")
-#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
-
-#define DRIVER_NAME "bfin-otp"
-#define PFX DRIVER_NAME ": "
-
-static DEFINE_MUTEX(bfin_otp_lock);
-
-/**
- * bfin_otp_read - Read OTP pages
- *
- * All reads must be in half page chunks (half page == 64 bits).
- */
-static ssize_t bfin_otp_read(struct file *file, char __user *buff, size_t count, loff_t *pos)
-{
- ssize_t bytes_done;
- u32 page, flags, ret;
- u64 content;
-
- stampit();
-
- if (count % sizeof(u64))
- return -EMSGSIZE;
-
- if (mutex_lock_interruptible(&bfin_otp_lock))
- return -ERESTARTSYS;
-
- bytes_done = 0;
- page = *pos / (sizeof(u64) * 2);
- while (bytes_done < count) {
- flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
- stamp("processing page %i (0x%x:%s)", page, flags,
- (flags & OTP_UPPER_HALF ? "upper" : "lower"));
- ret = bfrom_OtpRead(page, flags, &content);
- if (ret & OTP_MASTER_ERROR) {
- stamp("error from otp: 0x%x", ret);
- bytes_done = -EIO;
- break;
- }
- if (copy_to_user(buff + bytes_done, &content, sizeof(content))) {
- bytes_done = -EFAULT;
- break;
- }
- if (flags & OTP_UPPER_HALF)
- ++page;
- bytes_done += sizeof(content);
- *pos += sizeof(content);
- }
-
- mutex_unlock(&bfin_otp_lock);
-
- return bytes_done;
-}
-
-#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE
-static bool allow_writes;
-
-/**
- * bfin_otp_init_timing - setup OTP timing parameters
- *
- * Required before doing any write operation. Algorithms from HRM.
- */
-static u32 bfin_otp_init_timing(void)
-{
- u32 tp1, tp2, tp3, timing;
-
- tp1 = get_sclk() / 1000000;
- tp2 = (2 * get_sclk() / 10000000) << 8;
- tp3 = (0x1401) << 15;
- timing = tp1 | tp2 | tp3;
- if (bfrom_OtpCommand(OTP_INIT, timing))
- return 0;
-
- return timing;
-}
-
-/**
- * bfin_otp_deinit_timing - set timings to only allow reads
- *
- * Should be called after all writes are done.
- */
-static void bfin_otp_deinit_timing(u32 timing)
-{
- /* mask bits [31:15] so that any attempts to write fail */
- bfrom_OtpCommand(OTP_CLOSE, 0);
- bfrom_OtpCommand(OTP_INIT, timing & ~(-1 << 15));
- bfrom_OtpCommand(OTP_CLOSE, 0);
-}
-
-/**
- * bfin_otp_write - write OTP pages
- *
- * All writes must be in half page chunks (half page == 64 bits).
- */
-static ssize_t bfin_otp_write(struct file *filp, const char __user *buff, size_t count, loff_t *pos)
-{
- ssize_t bytes_done;
- u32 timing, page, base_flags, flags, ret;
- u64 content;
-
- if (!allow_writes)
- return -EACCES;
-
- if (count % sizeof(u64))
- return -EMSGSIZE;
-
- if (mutex_lock_interruptible(&bfin_otp_lock))
- return -ERESTARTSYS;
-
- stampit();
-
- timing = bfin_otp_init_timing();
- if (timing == 0) {
- mutex_unlock(&bfin_otp_lock);
- return -EIO;
- }
-
- base_flags = OTP_CHECK_FOR_PREV_WRITE;
-
- bytes_done = 0;
- page = *pos / (sizeof(u64) * 2);
- while (bytes_done < count) {
- flags = base_flags | (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
- stamp("processing page %i (0x%x:%s) from %p", page, flags,
- (flags & OTP_UPPER_HALF ? "upper" : "lower"), buff + bytes_done);
- if (copy_from_user(&content, buff + bytes_done, sizeof(content))) {
- bytes_done = -EFAULT;
- break;
- }
- ret = bfrom_OtpWrite(page, flags, &content);
- if (ret & OTP_MASTER_ERROR) {
- stamp("error from otp: 0x%x", ret);
- bytes_done = -EIO;
- break;
- }
- if (flags & OTP_UPPER_HALF)
- ++page;
- bytes_done += sizeof(content);
- *pos += sizeof(content);
- }
-
- bfin_otp_deinit_timing(timing);
-
- mutex_unlock(&bfin_otp_lock);
-
- return bytes_done;
-}
-
-static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg)
-{
- stampit();
-
- switch (cmd) {
- case OTPLOCK: {
- u32 timing;
- int ret = -EIO;
-
- if (!allow_writes)
- return -EACCES;
-
- if (mutex_lock_interruptible(&bfin_otp_lock))
- return -ERESTARTSYS;
-
- timing = bfin_otp_init_timing();
- if (timing) {
- u32 otp_result = bfrom_OtpWrite(arg, OTP_LOCK, NULL);
- stamp("locking page %lu resulted in 0x%x", arg, otp_result);
- if (!(otp_result & OTP_MASTER_ERROR))
- ret = 0;
-
- bfin_otp_deinit_timing(timing);
- }
-
- mutex_unlock(&bfin_otp_lock);
-
- return ret;
- }
-
- case MEMLOCK:
- allow_writes = false;
- return 0;
-
- case MEMUNLOCK:
- allow_writes = true;
- return 0;
- }
-
- return -EINVAL;
-}
-#else
-# define bfin_otp_write NULL
-# define bfin_otp_ioctl NULL
-#endif
-
-static const struct file_operations bfin_otp_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = bfin_otp_ioctl,
- .read = bfin_otp_read,
- .write = bfin_otp_write,
- .llseek = default_llseek,
-};
-
-static struct miscdevice bfin_otp_misc_device = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = DRIVER_NAME,
- .fops = &bfin_otp_fops,
-};
-module_misc_device(bfin_otp_misc_device);
-
-MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
-MODULE_DESCRIPTION("Blackfin OTP Memory Interface");
-MODULE_LICENSE("GPL");