Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list

13 files changed, 133 insertions, 57 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 66662b80e711..5affae6e99b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2377,6 +2377,7 @@ M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
@@ -2450,7 +2451,7 @@ N:	bcm88312
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Gregory Fong <gregory.0xf0@gmail.com>
-L:	bcm-kernel-feedback-list@broadcom.com>
+L:	bcm-kernel-feedback-list@broadcom.com
 S:	Supported
 F:	drivers/gpio/gpio-brcmstb.c
 F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
index ef1e8e7a6cc6..26001585673a 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -4,25 +4,74 @@
  * published by the Free Software Foundation.
  */
 
+&pllss_clocks {
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+
+	sysclk18_ck: sysclk18_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x02f0>;
+	};
+};
+
 &scm_clocks {
+	devosc_ck: devosc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0040>;
+	};
 
-	tclkin_ck: tclkin_ck {
+	/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	/* Optional 32768Hz crystal or clock on RTCOSC pins */
+	rtcosc_ck: rtcosc_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	devosc_ck: devosc_ck {
+	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
 
-	/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
-	auxosc_ck: auxosc_ck {
+	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
+		clock-frequency = <19200000>;
 	};
 
 	mpu_ck: mpu_ck {
@@ -49,12 +98,6 @@
 		clock-frequency = <48000000>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
         cpsw_125mhz_gclk: cpsw_125mhz_gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -69,7 +112,31 @@
 
 };
 
-&pllss_clocks {
+&prcm_clocks {
+	osc_src_ck: osc_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mpu_clksrc_ck: mpu_clksrc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&devosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0040>;
+	};
+
+	/* Fixed divider clock 0.0016384 * devosc */
+	rtcdivider_ck: rtcdivider_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <128>;
+		clock-div = <78125>;
+	};
 
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
@@ -88,22 +155,4 @@
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
-
-	timer1_mux_ck: timer1_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x2e0>;
-	};
-
-	timer2_mux_ck: timer2_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x2e0>;
-	};
 };
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 7988b42e5764..09a8d88bde23 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -58,8 +58,10 @@
 		ti,hwmods = "l3_main";
 
 		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary", just deduct
-		 * 0x1000 from the 1-317 addresses to get the device address
+		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+		 * It shows the module target agent registers though, so the
+		 * actual device is typically 0x1000 before the target agent
+		 * except in cases where the module is larger than 0x1000.
 		 */
 		l4ls: l4ls@48000000 {
 			compatible = "ti,dm814-l4ls", "simple-bus";
@@ -183,10 +185,10 @@
 
 			control: control@140000 {
 				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x16d000>;
+				reg = <0x140000 0x20000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0x160000 0x16d000>;
+				ranges = <0 0x140000 0x20000>;
 
 				scm_conf: scm_conf@0 {
 					compatible = "syscon";
@@ -203,19 +205,30 @@
 					};
 				};
 
+				/*
+				 * Note that silicon revision 2.1 and older
+				 * require input enabled (bit 18 set) for all
+				 * 3.3V I/Os to avoid cumulative hardware damage.
+				 * For more info, see errata advisory 2.1.87.
+				 * We leave bit 18 out of function-mask and rely
+				 * on the bootloader for it.
+				 */
 				pincntl: pinmux@800 {
 					compatible = "pinctrl-single";
-					reg = <0x800 0xc38>;
+					reg = <0x800 0x438>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x300ff>;
+					pinctrl-single,function-mask = <0x307ff>;
 				};
 			};
 
 			prcm: prcm@180000 {
 				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x4000>;
+				reg = <0x180000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x180000 0x2000>;
 
 				prcm_clocks: clocks {
 					#address-cells = <1>;
@@ -226,9 +239,13 @@
 				};
 			};
 
+			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
 			pllss: pllss@1c5000 {
 				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x2000>;
+				reg = <0x1c5000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1c5000 0x1000>;
 
 				pllss_clocks: clocks {
 					#address-cells = <1>;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 45f4c21e393c..e0df333202b8 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -84,7 +84,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
 
 	/* XXX: I'm unsure, but it seems so */
-	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
+	return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)));
 }
 
 static int scoop_gpio_direction_input(struct gpio_chip *chip,
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index dd8f5312b2c0..bcaf1d025505 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -34,7 +34,8 @@ config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
 	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
 	select ARCH_DAVINCI_DA8XX
-	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	# needed on silicon revs 1.0, 1.1:
+	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
 	select CP_INTC
 
 config ARCH_DAVINCI_DA850
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index c71dd9982f03..1844076f6403 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -384,9 +384,7 @@ static __init void dm355_evm_init(void)
 	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
 
 	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_evm_devices,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 680a7a2d9102..284ff27c1b32 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -242,9 +242,7 @@ static __init void dm355_leopard_init(void)
 	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
 
 	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_leopard_devices,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3eaeaca5da05..3c87e40650cf 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -612,8 +612,7 @@ void __init ti814x_init_early(void)
 	ti814x_clockdomains_init();
 	dm814x_hwmod_init();
 	omap_hwmod_init_postsetup();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = dm814x_dt_clk_init;
+	omap_clk_soc_init = dm814x_dt_clk_init;
 }
 
 void __init ti816x_init_early(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 6256052893ec..1b96cdfd1558 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -599,7 +599,7 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
 static struct omap_hwmod dm814x_timer1_hwmod = {
 	.name		= "timer1",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "timer_sys_ck",
+	.main_clk	= "timer1_fck",
 	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
@@ -608,7 +608,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = {
 static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm814x_timer1_hwmod,
-	.clk		= "timer_sys_ck",
+	.clk		= "timer1_fck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -636,7 +636,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
 static struct omap_hwmod dm814x_timer2_hwmod = {
 	.name		= "timer2",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "timer_sys_ck",
+	.main_clk	= "timer2_fck",
 	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
@@ -645,7 +645,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
 static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm814x_timer2_hwmod,
-	.clk		= "timer_sys_ck",
+	.clk		= "timer2_fck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -1230,8 +1230,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
 
 /*
  * REVISIT: Test and enable the following once clocks work:
- * dm81xx_l4_ls__gpio1
- * dm81xx_l4_ls__gpio2
  * dm81xx_l4_ls__mailbox
  * dm81xx_alwon_l3_slow__gpmc
  * dm81xx_default_l3_slow__usbss
@@ -1250,6 +1248,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_l4_ls__wd_timer1,
 	&dm81xx_l4_ls__i2c1,
 	&dm81xx_l4_ls__i2c2,
+	&dm81xx_l4_ls__gpio1,
+	&dm81xx_l4_ls__gpio2,
 	&dm81xx_l4_ls__elm,
 	&dm81xx_l4_ls__mcspi1,
 	&dm81xx_alwon_l3_fast__tpcc,
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 3fc2cbe52113..5b2f5138d938 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -664,6 +664,13 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 };
 #endif
 
+#ifdef CONFIG_SOC_TI81XX
+static struct omap_prcm_init_data dm814_pllss_data __initdata = {
+	.index = TI_CLKM_PLLSS,
+	.init = am33xx_prm_init,
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
@@ -715,6 +722,7 @@ static const struct of_device_id const omap_prcm_dt_match_table[] __initconst =
 #endif
 #ifdef CONFIG_SOC_TI81XX
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 #endif
 #ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e571d7..d8965c682d2f 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -98,8 +98,8 @@ static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 15)
-		return simpad_get_cs3_ro() & (1 << (offset - 16));
-	return simpad_get_cs3_shadow() & (1 << offset);
+		return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
+	return !!(simpad_get_cs3_shadow() & (1 << offset));
 };
 
 static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/clk/ti/clk-814x.c b/drivers/clk/ti/clk-814x.c
index e172920798ea..9e85fcc74cc9 100644
--- a/drivers/clk/ti/clk-814x.c
+++ b/drivers/clk/ti/clk-814x.c
@@ -14,10 +14,14 @@ static struct ti_dt_clk dm814_clks[] = {
 	DT_CLK(NULL, "devosc_ck", "devosc_ck"),
 	DT_CLK(NULL, "mpu_ck", "mpu_ck"),
 	DT_CLK(NULL, "sysclk4_ck", "sysclk4_ck"),
+	DT_CLK(NULL, "sysclk5_ck", "sysclk5_ck"),
 	DT_CLK(NULL, "sysclk6_ck", "sysclk6_ck"),
+	DT_CLK(NULL, "sysclk8_ck", "sysclk8_ck"),
 	DT_CLK(NULL, "sysclk10_ck", "sysclk10_ck"),
 	DT_CLK(NULL, "sysclk18_ck", "sysclk18_ck"),
 	DT_CLK(NULL, "timer_sys_ck", "devosc_ck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
 	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
 	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
 	{ .node_name = NULL },
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 75205df29b9c..9a638601cb09 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -195,6 +195,7 @@ enum {
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
 	TI_CLKM_CTRL,
+	TI_CLKM_PLLSS,
 	CLK_MAX_MEMMAPS
 };