summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-07-13 12:07:44 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-07-13 12:07:44 -0700
commitb5e16170f59b4ae38937b795a56a356fb95cca56 (patch)
tree7ed40053c10f5ce2982beb2195a2faf22a42d91e
parentda16dd9785f88680c4affe176c07e85067d4fdd7 (diff)
parent7d84120b5ba61912a5333f5fe2c4e8f35ef9514f (diff)
downloadlinux-b5e16170f59b4ae38937b795a56a356fb95cca56.tar.bz2
Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "General updates: - Cleanups and additional flash support for "dataflash" driver - new driver for mchp23k256 SPI SRAM device - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) - refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPINOR updates, from Cyrille Pitchen and Marek Vasut: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: - addition of on-die ECC support to Micron driver - addition of helpers to help drivers choose most appropriate ECC settings - deletion of dead-code (cached programming and ->errstat() hook) - make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) - change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag - support exiting 'GET STATUS' command in default ->cmdfunc() implementations - change the prototype of ->setup_data_interface() A bunch of driver related changes: - various cleanup, fixes and improvements of the MTK driver - OMAP DT bindings fixes - support for ->setup_data_interface() in the fsmc driver - support for imx7 in the gpmi driver - finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) - fix "bitflips in erased pages" handling in the ifc driver - addition of PM ops and dynamic timing configuration to the atmel driver" * tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits) Documentation: ABI: mtd: describe "offset" more precisely mtd: Fix check in mtd_unpoint() mtd: nand: mtk: release lock on error path mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead mtd: spi-nor: cqspi: remove duplicate const mtd: spi-nor: Add support for Spansion S25FL064L mtd: spi-nor: Add support for mx66u51235f mtd: nand: mtk: add ->setup_data_interface() hook mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume mtd: nand: mtk: disable ecc irq when writing page with hwecc mtd: nand: mtk: fix incorrect register setting order about ecc irq mtd: partitions: fixup some allocate_partition() whitespace mtd: parsers: trx: fix pr_err format for printing offset MAINTAINERS: Update SPI NOR subsystem git repositories mtd: extract TRX parser out of bcm47xxpart into a separated module mtd: partitions: add support for partition parsers mtd: partitions: add support for subpartitions mtd: partitions: rename "master" to the "parent" where appropriate mtd: partitions: remove sysfs files when deleting all master's partitions ...
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd6
-rw-r--r--Documentation/devicetree/bindings/mtd/denali-nand.txt13
-rw-r--r--Documentation/devicetree/bindings/mtd/elm.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nor.txt4
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-onenand.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt14
-rw-r--r--Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt18
-rw-r--r--Documentation/devicetree/bindings/mtd/mtk-nand.txt5
-rw-r--r--Documentation/devicetree/bindings/mtd/nand.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/partition.txt32
-rw-r--r--Documentation/devicetree/bindings/net/gpmc-eth.txt4
-rw-r--r--MAINTAINERS9
-rw-r--r--drivers/mtd/Kconfig4
-rw-r--r--drivers/mtd/Makefile1
-rw-r--r--drivers/mtd/bcm47xxpart.c99
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0020.c2
-rw-r--r--drivers/mtd/devices/Kconfig10
-rw-r--r--drivers/mtd/devices/Makefile1
-rw-r--r--drivers/mtd/devices/m25p80.c121
-rw-r--r--drivers/mtd/devices/mchp23k256.c236
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c200
-rw-r--r--drivers/mtd/devices/serial_flash_cmds.h1
-rw-r--r--drivers/mtd/devices/st_spi_fsm.c4
-rw-r--r--drivers/mtd/maps/physmap_of_gemini.c2
-rw-r--r--drivers/mtd/mtdcore.c2
-rw-r--r--drivers/mtd/mtdpart.c370
-rw-r--r--drivers/mtd/nand/Kconfig3
-rw-r--r--drivers/mtd/nand/atmel/nand-controller.c354
-rw-r--r--drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c2
-rw-r--r--drivers/mtd/nand/cafe_nand.c2
-rw-r--r--drivers/mtd/nand/davinci_nand.c3
-rw-r--r--drivers/mtd/nand/denali.c1831
-rw-r--r--drivers/mtd/nand/denali.h315
-rw-r--r--drivers/mtd/nand/denali_dt.c53
-rw-r--r--drivers/mtd/nand/denali_pci.c26
-rw-r--r--drivers/mtd/nand/docg4.c2
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c81
-rw-r--r--drivers/mtd/nand/fsmc_nand.c122
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c6
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c75
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h13
-rw-r--r--drivers/mtd/nand/hisi504_nand.c2
-rw-r--r--drivers/mtd/nand/jz4780_nand.c2
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c2
-rw-r--r--drivers/mtd/nand/mtk_ecc.c228
-rw-r--r--drivers/mtd/nand/mtk_ecc.h2
-rw-r--r--drivers/mtd/nand/mtk_nand.c279
-rw-r--r--drivers/mtd/nand/mxc_nand.c12
-rw-r--r--drivers/mtd/nand/nand_base.c349
-rw-r--r--drivers/mtd/nand/nand_micron.c222
-rw-r--r--drivers/mtd/nand/orion_nand.c6
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c2
-rw-r--r--drivers/mtd/nand/qcom_nandc.c2
-rw-r--r--drivers/mtd/nand/s3c2410.c5
-rw-r--r--drivers/mtd/nand/sh_flctl.c2
-rw-r--r--drivers/mtd/nand/sunxi_nand.c9
-rw-r--r--drivers/mtd/nand/tango_nand.c22
-rw-r--r--drivers/mtd/nand/vf610_nfc.c2
-rw-r--r--drivers/mtd/parsers/Kconfig8
-rw-r--r--drivers/mtd/parsers/Makefile1
-rw-r--r--drivers/mtd/parsers/parser_trx.c126
-rw-r--r--drivers/mtd/spi-nor/Kconfig2
-rw-r--r--drivers/mtd/spi-nor/aspeed-smc.c183
-rw-r--r--drivers/mtd/spi-nor/atmel-quadspi.c83
-rw-r--r--drivers/mtd/spi-nor/cadence-quadspi.c20
-rw-r--r--drivers/mtd/spi-nor/fsl-quadspi.c6
-rw-r--r--drivers/mtd/spi-nor/hisi-sfc.c31
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c7
-rw-r--r--drivers/mtd/spi-nor/mtk-quadspi.c15
-rw-r--r--drivers/mtd/spi-nor/nxp-spifi.c22
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c488
-rw-r--r--drivers/mtd/spi-nor/stm32-quadspi.c32
-rw-r--r--drivers/mtd/tests/subpagetest.c2
-rw-r--r--drivers/staging/mt29f_spinand/mt29f_spinand.c2
-rw-r--r--include/linux/mtd/nand.h80
-rw-r--r--include/linux/mtd/partitions.h7
-rw-r--r--include/linux/mtd/spi-nor.h161
79 files changed, 4272 insertions, 2208 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 3b5c3bca9186..f34e592301d1 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -229,6 +229,6 @@ KernelVersion: 4.1
Contact: linux-mtd@lists.infradead.org
Description:
For a partition, the offset of that partition from the start
- of the master device in bytes. This attribute is absent on
- main devices, so it can be used to distinguish between
- partitions and devices that aren't partitions.
+ of the parent (another partition or a flash device) in bytes.
+ This attribute is absent on flash devices, so it can be used
+ to distinguish them from partitions.
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index e593bbeb2115..504291d2e5c2 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -3,10 +3,23 @@
Required properties:
- compatible : should be one of the following:
"altr,socfpga-denali-nand" - for Altera SOCFPGA
+ "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a)
+ "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b)
- reg : should contain registers location and length for data and reg.
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
- interrupts : The interrupt number.
+Optional properties:
+ - nand-ecc-step-size: see nand.txt for details. If present, the value must be
+ 512 for "altr,socfpga-denali-nand"
+ 1024 for "socionext,uniphier-denali-nand-v5a"
+ 1024 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-strength: see nand.txt for details. Valid values are:
+ 8, 15 for "altr,socfpga-denali-nand"
+ 8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
+ 8, 16 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-maximize: see nand.txt for details
+
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
index 8c1528c421d4..59ddc61c1076 100644
--- a/Documentation/devicetree/bindings/mtd/elm.txt
+++ b/Documentation/devicetree/bindings/mtd/elm.txt
@@ -1,7 +1,7 @@
Error location module
Required properties:
-- compatible: Must be "ti,am33xx-elm"
+- compatible: Must be "ti,am3352-elm"
- reg: physical base address and size of the registers map.
- interrupts: Interrupt number for the elm.
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 174f68c26c1b..dd559045593d 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -5,7 +5,7 @@ the GPMC controller with a name of "nand".
All timing relevant properties as well as generic gpmc child properties are
explained in a separate documents - please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
For NAND specific properties such as ECC modes or bus width, please refer to
Documentation/devicetree/bindings/mtd/nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
index 4828c17bb784..131d3a74d0bd 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
@@ -5,7 +5,7 @@ child nodes of the GPMC controller with a name of "nor".
All timing relevant properties as well as generic GPMC child properties are
explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
@@ -28,7 +28,7 @@ Required properties:
Optional properties:
- gpmc,XXX Additional GPMC timings and settings parameters. See
- Documentation/devicetree/bindings/bus/ti-gpmc.txt
+ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Optional properties for partition table parsing:
- #address-cells: should be set to 1
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index 5d8fa527c496..b6e8bfd024f4 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -5,7 +5,7 @@ the GPMC controller with a name of "onenand".
All timing relevant properties as well as generic gpmc child properties are
explained in a separate documents - please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index d02acaff3c35..b289ef3c1b7e 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,12 @@ The GPMI nand controller provides an interface to control the
NAND flash chips.
Required properties:
- - compatible : should be "fsl,<chip>-gpmi-nand"
+ - compatible : should be "fsl,<chip>-gpmi-nand", chip can be:
+ * imx23
+ * imx28
+ * imx6q
+ * imx6sx
+ * imx7d
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- interrupts : BCH interrupt number.
@@ -13,6 +18,13 @@ Required properties:
and GPMI DMA channel ID.
Refer to dma.txt and fsl-mxs-dma.txt for details.
- dma-names: Must be "rx-tx".
+ - clocks : clocks phandle and clock specifier corresponding to each clock
+ specified in clock-names.
+ - clock-names : The "gpmi_io" clock is always required. Which clocks are
+ exactly required depends on chip:
+ * imx23/imx28 : "gpmi_io"
+ * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"
+ * imx7d : "gpmi_io", "gpmi_bch_apb"
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
new file mode 100644
index 000000000000..7328eb92a03c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -0,0 +1,18 @@
+* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+ spi-sram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,mchp23k256";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 069c192ed5c2..dbf9e054c11c 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -12,7 +12,8 @@ tree nodes.
The first part of NFC is NAND Controller Interface (NFI) HW.
Required NFI properties:
-- compatible: Should be "mediatek,mtxxxx-nfc".
+- compatible: Should be one of "mediatek,mt2701-nfc",
+ "mediatek,mt2712-nfc".
- reg: Base physical address and size of NFI.
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
@@ -141,7 +142,7 @@ Example:
==============
Required BCH properties:
-- compatible: Should be "mediatek,mtxxxx-ecc".
+- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc".
- reg: Base physical address and size of ECC.
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index b05601600083..133f3813719c 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -21,7 +21,7 @@ Optional NAND chip properties:
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
Supported values are: "none", "soft", "hw", "hw_syndrome",
- "hw_oob_first".
+ "hw_oob_first", "on-die".
Deprecated values:
"soft_bch": use "soft" and nand-ecc-algo instead
- nand-ecc-algo: string, algorithm of NAND ECC.
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index 81a224da63be..36f3b769a626 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -1,29 +1,49 @@
-Representing flash partitions in devicetree
+Flash partitions in device tree
+===============================
-Partitions can be represented by sub-nodes of an mtd device. This can be used
+Flash devices can be partitioned into one or more functional ranges (e.g. "boot
+code", "nvram", "kernel").
+
+Different devices may be partitioned in a different ways. Some may use a fixed
+flash layout set at production time. Some may use on-flash table that describes
+the geometry and naming/purpose of each functional region. It is also possible
+to see these methods mixed.
+
+To assist system software in locating partitions, we allow describing which
+method is used for a given flash device. To describe the method there should be
+a subnode of the flash device that is named 'partitions'. It must have a
+'compatible' property, which is used to identify the method to use.
+
+We currently only document a binding for fixed layouts.
+
+
+Fixed Partitions
+================
+
+Partitions can be represented by sub-nodes of a flash device. This can be used
on platforms which have strong conventions about which portions of a flash are
used for what purposes, but which don't use an on-flash partition table such
as RedBoot.
-The partition table should be a subnode of the mtd node and should be named
+The partition table should be a subnode of the flash node and should be named
'partitions'. This node should have the following property:
- compatible : (required) must be "fixed-partitions"
Partitions are then defined in subnodes of the partitions node.
-For backwards compatibility partitions as direct subnodes of the mtd device are
+For backwards compatibility partitions as direct subnodes of the flash device are
supported. This use is discouraged.
NOTE: also for backwards compatibility, direct subnodes that have a compatible
string are not considered partitions, as they may be used for other bindings.
#address-cells & #size-cells must both be present in the partitions subnode of the
-mtd device. There are two valid values for both:
+flash device. There are two valid values for both:
<1>: for partitions that require a single 32-bit cell to represent their
size/address (aka the value is below 4 GiB)
<2>: for partitions that require two 32-bit cells to represent their
size/address (aka the value is 4 GiB or greater).
Required properties:
-- reg : The partition's offset and size within the mtd bank.
+- reg : The partition's offset and size within the flash
Optional properties:
- label : The label / name for this partition. If omitted, the label is taken
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index ace4a64b3695..f7da3d73ca1b 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name.
All timing relevant properties as well as generic GPMC child properties are
explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
For the properties relevant to the ethernet controller connected to the GPMC
refer to the binding documentation of the device. For example, the documentation
@@ -43,7 +43,7 @@ Required properties:
Optional properties:
- gpmc,XXX Additional GPMC timings and settings parameters. See
- Documentation/devicetree/bindings/bus/ti-gpmc.txt
+ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Example:
diff --git a/MAINTAINERS b/MAINTAINERS
index 1347726cf9d5..e1a22ed547b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3974,6 +3974,12 @@ M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
F: drivers/platform/x86/dell-wmi.c
+DENALI NAND DRIVER
+M: Masahiro Yamada <yamada.masahiro@socionext.com>
+L: linux-mtd@lists.infradead.org
+S: Supported
+F: drivers/mtd/nand/denali*
+
DESIGNWARE USB2 DRD IP DRIVER
M: John Youn <johnyoun@synopsys.com>
L: linux-usb@vger.kernel.org
@@ -12464,7 +12470,8 @@ M: Marek Vasut <marek.vasut@gmail.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://github.com/spi-nor/linux.git
+T: git git://git.infradead.org/linux-mtd.git spi-nor/fixes
+T: git git://git.infradead.org/l2-mtd.git spi-nor/next
S: Maintained
F: drivers/mtd/spi-nor/
F: include/linux/mtd/spi-nor.h
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index e83a279f1217..5a2d71729b9a 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -155,6 +155,10 @@ config MTD_BCM47XX_PARTS
This provides partitions parser for devices based on BCM47xx
boards.
+menu "Partition parsers"
+source "drivers/mtd/parsers/Kconfig"
+endmenu
+
comment "User Modules And Translation Layers"
#
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 99bb9a1f6e16..151d60df303a 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+obj-y += parsers/
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index d10fa6c8f074..fe2581d9d882 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -43,7 +43,8 @@
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
#define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */
-#define UBI_EC_MAGIC 0x23494255 /* UBI# */
+
+static const char * const trx_types[] = { "trx", NULL };
struct trx_header {
uint32_t magic;
@@ -62,89 +63,6 @@ static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name,
part->mask_flags = mask_flags;
}
-static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
- size_t offset)
-{
- uint32_t buf;
- size_t bytes_read;
- int err;
-
- err = mtd_read(master, offset, sizeof(buf), &bytes_read,
- (uint8_t *)&buf);
- if (err && !mtd_is_bitflip(err)) {
- pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
- offset, err);
- goto out_default;
- }
-
- if (buf == UBI_EC_MAGIC)
- return "ubi";
-
-out_default:
- return "rootfs";
-}
-
-static int bcm47xxpart_parse_trx(struct mtd_info *master,
- struct mtd_partition *trx,
- struct mtd_partition *parts,
- size_t parts_len)
-{
- struct trx_header header;
- size_t bytes_read;
- int curr_part = 0;
- int i, err;
-
- if (parts_len < 3) {
- pr_warn("No enough space to add TRX partitions!\n");
- return -ENOMEM;
- }
-
- err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
- (uint8_t *)&header);
- if (err && !mtd_is_bitflip(err)) {
- pr_err("mtd_read error while reading TRX header: %d\n", err);
- return err;
- }
-
- i = 0;
-
- /* We have LZMA loader if offset[2] points to sth */
- if (header.offset[2]) {
- bcm47xxpart_add_part(&parts[curr_part++], "loader",
- trx->offset + header.offset[i], 0);
- i++;
- }
-
- if (header.offset[i]) {
- bcm47xxpart_add_part(&parts[curr_part++], "linux",
- trx->offset + header.offset[i], 0);
- i++;
- }
-
- if (header.offset[i]) {
- size_t offset = trx->offset + header.offset[i];
- const char *name = bcm47xxpart_trx_data_part_name(master,
- offset);
-
- bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
- i++;
- }
-
- /*
- * Assume that every partition ends at the beginning of the one it is
- * followed by.
- */
- for (i = 0; i < curr_part; i++) {
- u64 next_part_offset = (i < curr_part - 1) ?
- parts[i + 1].offset :
- trx->offset + trx->size;
-
- parts[i].size = next_part_offset - parts[i].offset;
- }
-
- return curr_part;
-}
-
/**
* bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
*
@@ -362,17 +280,10 @@ static int bcm47xxpart_parse(struct mtd_info *master,
for (i = 0; i < trx_num; i++) {
struct mtd_partition *trx = &parts[trx_parts[i]];
- if (i == bcm47xxpart_bootpartition()) {
- int num_parts;
-
- num_parts = bcm47xxpart_parse_trx(master, trx,
- parts + curr_part,
- BCM47XXPART_MAX_PARTS - curr_part);
- if (num_parts > 0)
- curr_part += num_parts;
- } else {
+ if (i == bcm47xxpart_bootpartition())
+ trx->types = trx_types;
+ else
trx->name = "failsafe";
- }
}
*pparts = parts;
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 94d3eb42c4d5..7d342965f392 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -666,7 +666,7 @@ cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
size_t totlen = 0, thislen;
int ret = 0;
size_t buflen = 0;
- static char *buffer;
+ char *buffer;
if (!ECCBUF_SIZE) {
/* We should fall back to a general writev implementation.
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 58329d2dacd1..6def5445e03e 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -95,6 +95,16 @@ config MTD_M25P80
if you want to specify device partitioning or to use a device which
doesn't support the JEDEC ID instruction.
+config MTD_MCHP23K256
+ tristate "Microchip 23K256 SRAM"
+ depends on SPI_MASTER
+ help
+ This enables access to Microchip 23K256 SRAM chips, using SPI.
+
+ Set up your spi devices with the right board-specific
+ platform data, or a device tree description if you want to
+ specify device partitioning
+
config MTD_SPEAR_SMI
tristate "SPEAR MTD NOR Support through SMI controller"
depends on PLAT_SPEAR
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 7912d3a0ee34..f0f767624cc6 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4df3b1bded0..00eea6fd379c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -78,11 +78,17 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
- struct spi_transfer t[2] = {};
+ unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
+ struct spi_transfer t[3] = {};
struct spi_message m;
int cmd_sz = m25p_cmdsz(nor);
ssize_t ret;
+ /* get transfer protocols. */
+ inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+ addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+ data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
spi_message_init(&m);
if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
@@ -92,12 +98,27 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
m25p_addr2cmd(nor, to, flash->command);
t[0].tx_buf = flash->command;
+ t[0].tx_nbits = inst_nbits;
t[0].len = cmd_sz;
spi_message_add_tail(&t[0], &m);
- t[1].tx_buf = buf;
- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
+ /* split the op code and address bytes into two transfers if needed. */
+ data_idx = 1;
+ if (addr_nbits != inst_nbits) {
+ t[0].len = 1;
+
+ t[1].tx_buf = &flash->command[1];
+ t[1].tx_nbits = addr_nbits;
+ t[1].len = cmd_sz - 1;
+ spi_message_add_tail(&t[1], &m);
+
+ data_idx = 2;
+ }
+
+ t[data_idx].tx_buf = buf;
+ t[data_idx].tx_nbits = data_nbits;
+ t[data_idx].len = len;
+ spi_message_add_tail(&t[data_idx], &m);
ret = spi_sync(spi, &m);
if (ret)
@@ -109,18 +130,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
return ret;
}
-static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
-{
- switch (nor->flash_read) {
- case SPI_NOR_DUAL:
- return 2;
- case SPI_NOR_QUAD:
- return 4;
- default:
- return 0;
- }
-}
-
/*
* Read an address range from the nor chip. The address range
* may be any size provided it is within the physical boundaries.
@@ -130,13 +139,20 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
- struct spi_transfer t[2];
+ unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
+ struct spi_transfer t[3];
struct spi_message m;
unsigned int dummy = nor->read_dummy;
ssize_t ret;
+ int cmd_sz;
+
+ /* get transfer protocols. */
+ inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+ addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+ data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto);
/* convert the dummy cycles to the number of bytes */
- dummy /= 8;
+ dummy = (dummy * addr_nbits) / 8;
if (spi_flash_read_supported(spi)) {
struct spi_flash_read_message msg;
@@ -149,10 +165,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
msg.read_opcode = nor->read_opcode;
msg.addr_width = nor->addr_width;
msg.dummy_bytes = dummy;
- /* TODO: Support other combinations */
- msg.opcode_nbits = SPI_NBITS_SINGLE;
- msg.addr_nbits = SPI_NBITS_SINGLE;
- msg.data_nbits = m25p80_rx_nbits(nor);
+ msg.opcode_nbits = inst_nbits;
+ msg.addr_nbits = addr_nbits;
+ msg.data_nbits = data_nbits;
ret = spi_flash_read(spi, &msg);
if (ret < 0)
@@ -167,20 +182,45 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
m25p_addr2cmd(nor, from, flash->command);
t[0].tx_buf = flash->command;
+ t[0].tx_nbits = inst_nbits;
t[0].len = m25p_cmdsz(nor) + dummy;
spi_message_add_tail(&t[0], &m);
- t[1].rx_buf = buf;
- t[1].rx_nbits = m25p80_rx_nbits(nor);
- t[1].len = min3(len, spi_max_transfer_size(spi),
- spi_max_message_size(spi) - t[0].len);
- spi_message_add_tail(&t[1], &m);
+ /*
+ * Set all dummy/mode cycle bits to avoid sending some manufacturer
+ * specific pattern, which might make the memory enter its Continuous
+ * Read mode by mistake.
+ * Based on the different mode cycle bit patterns listed and described
+ * in the JESD216B specification, the 0xff value works for all memories
+ * and all manufacturers.
+ */
+ cmd_sz = t[0].len;
+ memset(flash->command + cmd_sz - dummy, 0xff, dummy);
+
+ /* split the op code and address bytes into two transfers if needed. */
+ data_idx = 1;
+ if (addr_nbits != inst_nbits) {
+ t[0].len = 1;
+
+ t[1].tx_buf = &flash->command[1];
+ t[1].tx_nbits = addr_nbits;
+ t[1].len = cmd_sz - 1;
+ spi_message_add_tail(&t[1], &m);
+
+ data_idx = 2;
+ }
+
+ t[data_idx].rx_buf = buf;
+ t[data_idx].rx_nbits = data_nbits;
+ t[data_idx].len = min3(len, spi_max_transfer_size(spi),
+ spi_max_message_size(spi) - cmd_sz);
+ spi_message_add_tail(&t[data_idx], &m);
ret = spi_sync(spi, &m);
if (ret)
return ret;
- ret = m.actual_length - m25p_cmdsz(nor) - dummy;
+ ret = m.actual_length - cmd_sz;
if (ret < 0)
return -EIO;
return ret;
@@ -196,7 +236,11 @@ static int m25p_probe(struct spi_device *spi)
struct flash_platform_data *data;
struct m25p *flash;
struct spi_nor *nor;
- enum read_mode mode = SPI_NOR_NORMAL;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
char *flash_name;
int ret;
@@ -221,10 +265,19 @@ static int m25p_probe(struct spi_device *spi)
spi_set_drvdata(spi, flash);
flash->spi = spi;
- if (spi->mode & SPI_RX_QUAD)
- mode = SPI_NOR_QUAD;
- else if (spi->mode & SPI_RX_DUAL)
- mode = SPI_NOR_DUAL;
+ if (spi->mode & SPI_RX_QUAD) {
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+
+ if (spi->mode & SPI_TX_QUAD)
+ hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 |
+ SNOR_HWCAPS_PP_1_1_4 |
+ SNOR_HWCAPS_PP_1_4_4);
+ } else if (spi->mode & SPI_RX_DUAL) {
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+
+ if (spi->mode & SPI_TX_DUAL)
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2;
+ }
if (data && data->name)
nor->mtd.name = data->name;
@@ -241,7 +294,7 @@ static int m25p_probe(struct spi_device *spi)
else
flash_name = spi->modalias;
- ret = spi_nor_scan(nor, flash_name, mode);
+ ret = spi_nor_scan(nor, flash_name, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
new file mode 100644
index 000000000000..8956b7dcc984
--- /dev/null
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -0,0 +1,236 @@
+/*
+ * mchp23k256.c
+ *
+ * Driver for Microchip 23k256 SPI RAM chips
+ *
+ * Copyright © 2016 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/of_device.h>
+
+#define MAX_CMD_SIZE 4
+
+struct mchp23_caps {
+ u8 addr_width;
+ unsigned int size;
+};
+
+struct mchp23k256_flash {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct mtd_info mtd;
+ const struct mchp23_caps *caps;
+};
+
+#define MCHP23K256_CMD_WRITE_STATUS 0x01
+#define MCHP23K256_CMD_WRITE 0x02
+#define MCHP23K256_CMD_READ 0x03
+#define MCHP23K256_MODE_SEQ BIT(6)
+
+#define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
+
+static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
+ unsigned int addr, u8 *cmd)
+{
+ int i;
+
+ /*
+ * Address is sent in big endian (MSB first) and we skip
+ * the first entry of the cmd array which contains the cmd
+ * opcode.
+ */
+ for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
+ cmd[i] = addr;
+}
+
+static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
+{
+ return 1 + flash->caps->addr_width;
+}
+
+static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const unsigned char *buf)
+{
+ struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
+ struct spi_transfer transfer[2] = {};
+ struct spi_message message;
+ unsigned char command[MAX_CMD_SIZE];
+
+ spi_message_init(&message);
+
+ command[0] = MCHP23K256_CMD_WRITE;
+ mchp23k256_addr2cmd(flash, to, command);
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = mchp23k256_cmdsz(flash);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].tx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, unsigned char *buf)
+{
+ struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
+ struct spi_transfer transfer[2] = {};
+ struct spi_message message;
+ unsigned char command[MAX_CMD_SIZE];
+
+ spi_message_init(&message);
+
+ memset(&transfer, 0, sizeof(transfer));
+ command[0] = MCHP23K256_CMD_READ;
+ mchp23k256_addr2cmd(flash, from, command);
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = mchp23k256_cmdsz(flash);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].rx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+/*
+ * Set the device into sequential mode. This allows read/writes to the
+ * entire SRAM in a single operation
+ */
+static int mchp23k256_set_mode(struct spi_device *spi)
+{
+ struct spi_transfer transfer = {};
+ struct spi_message message;
+ unsigned char command[2];
+
+ spi_message_init(&message);
+
+ command[0] = MCHP23K256_CMD_WRITE_STATUS;
+ command[1] = MCHP23K256_MODE_SEQ;
+
+ transfer.tx_buf = command;
+ transfer.len = sizeof(command);
+ spi_message_add_tail(&transfer, &message);
+
+ return spi_sync(spi, &message);
+}
+
+static const struct mchp23_caps mchp23k256_caps = {
+ .size = SZ_32K,
+ .addr_width = 2,
+};
+
+static const struct mchp23_caps mchp23lcv1024_caps = {
+ .size = SZ_128K,
+ .addr_width = 3,
+};
+
+static int mchp23k256_probe(struct spi_device *spi)
+{
+ struct mchp23k256_flash *flash;
+ struct flash_platform_data *data;
+ int err;
+
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->spi = spi;
+ mutex_init(&flash->lock);
+ spi_set_drvdata(spi, flash);
+
+ err = mchp23k256_set_mode(spi);
+ if (err)
+ return err;
+
+ data = dev_get_platdata(&spi->dev);
+
+ flash->caps = of_device_get_match_data(&spi->dev);
+ if (!flash->caps)
+ flash->caps = &mchp23k256_caps;
+
+ mtd_set_of_node(&flash->mtd, spi->dev.of_node);
+ flash->mtd.dev.parent = &spi->dev;
+ flash->mtd.type = MTD_RAM;
+ flash->mtd.flags = MTD_CAP_RAM;
+ flash->mtd.writesize = 1;
+ flash->mtd.size = flash->caps->size;
+ flash->mtd._read = mchp23k256_read;
+ flash->mtd._write = mchp23k256_write;
+
+ err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int mchp23k256_remove(struct spi_device *spi)
+{
+ struct mchp23k256_flash *flash = spi_get_drvdata(spi);
+
+ return mtd_device_unregister(&flash->mtd);
+}
+
+static const struct of_device_id mchp23k256_of_table[] = {
+ {
+ .compatible = "microchip,mchp23k256",
+ .data = &mchp23k256_caps,
+ },
+ {
+ .compatible = "microchip,mchp23lcv1024",
+ .data = &mchp23lcv1024_caps,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
+
+static struct spi_driver mchp23k256_driver = {
+ .driver = {
+ .name = "mchp23k256",
+ .of_match_table = of_match_ptr(mchp23k256_of_table),
+ },
+ .probe = mchp23k256_probe,
+ .remove = mchp23k256_remove,
+};
+
+module_spi_driver(mchp23k256_driver);
+
+MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips");
+MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:mchp23k256");
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index f9e9bd1cfaa0..5dc8bd042cc5 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,9 +82,13 @@
#define OP_WRITE_SECURITY_REVC 0x9A
#define OP_WRITE_SECURITY 0x9B /* revision D */
+#define CFI_MFR_ATMEL 0x1F
+
+#define DATAFLASH_SHIFT_EXTID 24
+#define DATAFLASH_SHIFT_ID 40
struct dataflash {
- uint8_t command[4];
+ u8 command[4];
char name[24];
unsigned short page_offset; /* offset in flash address */
@@ -129,8 +133,7 @@ static int dataflash_waitready(struct spi_device *spi)
for (;;) {
status = dataflash_status(spi);
if (status < 0) {
- pr_debug("%s: status %d?\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status %d?\n", status);
status = 0;
}
@@ -153,12 +156,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
struct spi_transfer x = { };
struct spi_message msg;
unsigned blocksize = priv->page_size << 3;
- uint8_t *command;
- uint32_t rem;
+ u8 *command;
+ u32 rem;
- pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
- dev_name(&spi->dev), (long long)instr->addr,
- (long long)instr->len);
+ dev_dbg(&spi->dev, "erase addr=0x%llx len 0x%llx\n",
+ (long long)instr->addr, (long long)instr->len);
div_u64_rem(instr->len, priv->page_size, &rem);
if (rem)
@@ -187,11 +189,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
pageaddr = pageaddr << priv->page_offset;
command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
- command[1] = (uint8_t)(pageaddr >> 16);
- command[2] = (uint8_t)(pageaddr >> 8);
+ command[1] = (u8)(pageaddr >> 16);
+ command[2] = (u8)(pageaddr >> 8);
command[3] = 0;
- pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
+ dev_dbg(&spi->dev, "ERASE %s: (%x) %x %x %x [%i]\n",
do_block ? "block" : "page",
command[0], command[1], command[2], command[3],
pageaddr);
@@ -200,8 +202,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
(void) dataflash_waitready(spi);
if (status < 0) {
- printk(KERN_ERR "%s: erase %x, err %d\n",
- dev_name(&spi->dev), pageaddr, status);
+ dev_err(&spi->dev, "erase %x, err %d\n",
+ pageaddr, status);
/* REVISIT: can retry instr->retries times; or
* giveup and instr->fail_addr = instr->addr;
*/
@@ -239,11 +241,11 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
struct spi_transfer x[2] = { };
struct spi_message msg;
unsigned int addr;
- uint8_t *command;
+ u8 *command;
int status;
- pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
- (unsigned)from, (unsigned)(from + len));
+ dev_dbg(&priv->spi->dev, "read 0x%x..0x%x\n",
+ (unsigned int)from, (unsigned int)(from + len));
/* Calculate flash page/byte address */
addr = (((unsigned)from / priv->page_size) << priv->page_offset)
@@ -251,7 +253,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
command = priv->command;
- pr_debug("READ: (%x) %x %x %x\n",
+ dev_dbg(&priv->spi->dev, "READ: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
spi_message_init(&msg);
@@ -271,9 +273,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
* fewer "don't care" bytes. Both buffers stay unchanged.
*/
command[0] = OP_READ_CONTINUOUS;
- command[1] = (uint8_t)(addr >> 16);
- command[2] = (uint8_t)(addr >> 8);
- command[3] = (uint8_t)(addr >> 0);
+ command[1] = (u8)(addr >> 16);
+ command[2] = (u8)(addr >> 8);
+ command[3] = (u8)(addr >> 0);
/* plus 4 "don't care" bytes */
status = spi_sync(priv->spi, &msg);
@@ -283,8 +285,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
*retlen = msg.actual_length - 8;
status = 0;
} else
- pr_debug("%s: read %x..%x --> %d\n",
- dev_name(&priv->spi->dev),
+ dev_dbg(&priv->spi->dev, "read %x..%x --> %d\n",
(unsigned)from, (unsigned)(from + len),
status);
return status;
@@ -308,10 +309,10 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t remaining = len;
u_char *writebuf = (u_char *) buf;
int status = -EINVAL;
- uint8_t *command;
+ u8 *command;
- pr_debug("%s: write 0x%x..0x%x\n",
- dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
+ dev_dbg(&spi->dev, "write 0x%x..0x%x\n",
+ (unsigned int)to, (unsigned int)(to + len));
spi_message_init(&msg);
@@ -328,7 +329,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
mutex_lock(&priv->lock);
while (remaining > 0) {
- pr_debug("write @ %i:%i len=%i\n",
+ dev_dbg(&spi->dev, "write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
/* REVISIT:
@@ -356,13 +357,13 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- pr_debug("TRANSFER: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- pr_debug("%s: xfer %u -> %d\n",
- dev_name(&spi->dev), addr, status);
+ dev_dbg(&spi->dev, "xfer %u -> %d\n",
+ addr, status);
(void) dataflash_waitready(priv->spi);
}
@@ -374,7 +375,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = (addr & 0x000000FF);
- pr_debug("PROGRAM: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
x[1].tx_buf = writebuf;
@@ -383,8 +384,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
status = spi_sync(spi, &msg);
spi_transfer_del(x + 1);
if (status < 0)
- pr_debug("%s: pgm %u/%u -> %d\n",
- dev_name(&spi->dev), addr, writelen, status);
+ dev_dbg(&spi->dev, "pgm %u/%u -> %d\n",
+ addr, writelen, status);
(void) dataflash_waitready(priv->spi);
@@ -398,20 +399,20 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- pr_debug("COMPARE: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- pr_debug("%s: compare %u -> %d\n",
- dev_name(&spi->dev), addr, status);
+ dev_dbg(&spi->dev, "compare %u -> %d\n",
+ addr, status);
status = dataflash_waitready(priv->spi);
/* Check result of the compare operation */
if (status & (1 << 6)) {
- printk(KERN_ERR "%s: compare page %u, err %d\n",
- dev_name(&spi->dev), pageaddr, status);
+ dev_err(&spi->dev, "compare page %u, err %d\n",
+ pageaddr, status);
remaining = 0;
status = -EIO;
break;
@@ -455,11 +456,11 @@ static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len,
}
static ssize_t otp_read(struct spi_device *spi, unsigned base,
- uint8_t *buf, loff_t off, size_t len)
+ u8 *buf, loff_t off, size_t len)
{
struct spi_message m;
size_t l;
- uint8_t *scratch;
+ u8 *scratch;
struct spi_transfer t;
int status;
@@ -538,7 +539,7 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
{
struct spi_message m;
const size_t l = 4 + 64;
- uint8_t *scratch;
+ u8 *scratch;
struct spi_transfer t;
struct dataflash *priv = mtd->priv;
int status;
@@ -689,14 +690,15 @@ struct flash_info {
/* JEDEC id has a high byte of zero plus three data bytes:
* the manufacturer id, then a two byte device id.
*/
- uint32_t jedec_id;
+ u64 jedec_id;
/* The size listed here is what works with OP_ERASE_PAGE. */
unsigned nr_pages;
- uint16_t pagesize;
- uint16_t pageoffset;
+ u16 pagesize;
+ u16 pageoffset;
- uint16_t flags;
+ u16 flags;
+#define SUP_EXTID 0x0004 /* supports extended ID data */
#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
};
@@ -734,54 +736,32 @@ static struct flash_info dataflash_data[] = {
{ "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
{ "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS},
+ { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS},
};
-static struct flash_info *jedec_probe(struct spi_device *spi)
+static struct flash_info *jedec_lookup(struct spi_device *spi,
+ u64 jedec, bool use_extid)
{
- int tmp;
- uint8_t code = OP_READ_ID;
- uint8_t id[3];
- uint32_t jedec;
- struct flash_info *info;
+ struct flash_info *info;
int status;
- /* JEDEC also defines an optional "extended device information"
- * string for after vendor-specific data, after the three bytes
- * we use here. Supporting some chips might require using it.
- *
- * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
- * That's not an error; only rev C and newer chips handle it, and
- * only Atmel sells these chips.
- */
- tmp = spi_write_then_read(spi, &code, 1, id, 3);
- if (tmp < 0) {
- pr_debug("%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
- return ERR_PTR(tmp);
- }
- if (id[0] != 0x1f)
- return NULL;
-
- jedec = id[0];
- jedec = jedec << 8;
- jedec |= id[1];
- jedec = jedec << 8;
- jedec |= id[2];
+ for (info = dataflash_data;
+ info < dataflash_data + ARRAY_SIZE(dataflash_data);
+ info++) {
+ if (use_extid && !(info->flags & SUP_EXTID))
+ continue;
- for (tmp = 0, info = dataflash_data;
- tmp < ARRAY_SIZE(dataflash_data);
- tmp++, info++) {
if (info->jedec_id == jedec) {
- pr_debug("%s: OTP, sector protect%s\n",
- dev_name(&spi->dev),
- (info->flags & SUP_POW2PS)
- ? ", binary pagesize" : ""
- );
+ dev_dbg(&spi->dev, "OTP, sector protect%s\n",
+ (info->flags & SUP_POW2PS) ?
+ ", binary pagesize" : "");
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- pr_debug("%s: status error %d\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status error %d\n",
+ status);
return ERR_PTR(status);
}
if (status & 0x1) {
@@ -796,12 +776,58 @@ static struct flash_info *jedec_probe(struct spi_device *spi)
}
}
+ return ERR_PTR(-ENODEV);
+}
+
+static struct flash_info *jedec_probe(struct spi_device *spi)
+{
+ int ret;
+ u8 code = OP_READ_ID;
+ u64 jedec;
+ u8 id[sizeof(jedec)] = {0};
+ const unsigned int id_size = 5;
+ struct flash_info *info;
+
+ /*
+ * JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ *
+ * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+ * That's not an error; only rev C and newer chips handle it, and
+ * only Atmel sells these chips.
+ */
+ ret = spi_write_then_read(spi, &code, 1, id, id_size);
+ if (ret < 0) {
+ dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ if (id[0] != CFI_MFR_ATMEL)
+ return NULL;
+
+ jedec = be64_to_cpup((__be64 *)id);
+
+ /*
+ * First, try to match device using extended device
+ * information
+ */
+ info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_EXTID, true);
+ if (!IS_ERR(info))
+ return info;
+ /*
+ * If that fails, make another pass using regular ID
+ * information
+ */
+ info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_ID, false);
+ if (!IS_ERR(info))
+ return info;
/*
* Treat other chips as errors ... we won't know the right page
* size (it might be binary) even when we can tell which density
* class is involved (legacy chip id scheme).
*/
- dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+ dev_warn(&spi->dev, "JEDEC id %016llx not handled\n", jedec);
return ERR_PTR(-ENODEV);
}
@@ -845,8 +871,7 @@ static int dataflash_probe(struct spi_device *spi)
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- pr_debug("%s: status error %d\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status error %d\n", status);
if (status == 0 || status == 0xff)
status = -ENODEV;
return status;
@@ -887,8 +912,7 @@ static int dataflash_probe(struct spi_device *spi)
}
if (status < 0)
- pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
- status);
+ dev_dbg(&spi->dev, "add_dataflash --> %d\n", status);
return status;
}
@@ -898,7 +922,7 @@ static int dataflash_remove(struct spi_device *spi)
struct dataflash *flash = spi_get_drvdata(spi);
int status;
- pr_debug("%s: remove\n", dev_name(&spi->dev));
+ dev_dbg(&spi->dev, "remove\n");
status = mtd_device_unregister(&flash->mtd);
if (status == 0)
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
index 8b81e15105dd..eba125c9f23f 100644
--- a/drivers/mtd/devices/serial_flash_cmds.h
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -13,7 +13,6 @@
#define _MTD_SERIAL_FLASH_CMDS_H
/* Generic Flash Commands/OPCODEs */
-#define SPINOR_OP_RDSR2 0x35
#define SPINOR_OP_WRVCR 0x81
#define SPINOR_OP_RDVCR 0x85
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 804313a33f2b..21afd94cd904 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -1445,7 +1445,7 @@ static int stfsm_s25fl_config(struct stfsm *fsm)
}
/* Check status of 'QE' bit, update if required. */
- stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1);
+ stfsm_read_status(fsm, SPINOR_OP_RDCR, &cr1, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
@@ -1490,7 +1490,7 @@ static int stfsm_w25q_config(struct stfsm *fsm)
return ret;
/* Check status of 'QE' bit, update if required. */
- stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1);
+ stfsm_read_status(fsm, SPINOR_OP_RDCR, &sr2, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(sr2 & W25Q_STATUS_QE)) {
diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c
index 9d371cd728ea..05b286b5289f 100644
--- a/drivers/mtd/maps/physmap_of_gemini.c
+++ b/drivers/mtd/maps/physmap_of_gemini.c
@@ -59,7 +59,7 @@ int of_flash_probe_gemini(struct platform_device *pdev,
struct device_node *np,
struct map_info *map)
{
- static struct regmap *rmap;
+ struct regmap *rmap;
struct device *dev = &pdev->dev;
u32 val;
int ret;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 1517da3ddd7d..956382cea256 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -991,7 +991,7 @@ EXPORT_SYMBOL_GPL(mtd_point);
/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
- if (!mtd->_point)
+ if (!mtd->_unpoint)
return -EOPNOTSUPP;
if (from < 0 || from >= mtd->size || len > mtd->size - from)
return -EINVAL;
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index ea5e5307f667..5736b0c90b33 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -37,10 +37,16 @@
static LIST_HEAD(mtd_partitions);
static DEFINE_MUTEX(mtd_partitions_mutex);
-/* Our partition node structure */
+/**
+ * struct mtd_part - our partition node structure
+ *
+ * @mtd: struct holding partition details
+ * @parent: parent mtd - flash device or another partition
+ * @offset: partition offset relative to the *flash device*
+ */
struct mtd_part {
struct mtd_info mtd;
- struct mtd_info *master;
+ struct mtd_info *parent;
uint64_t offset;
struct list_head list;
};
@@ -67,15 +73,15 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
struct mtd_ecc_stats stats;
int res;
- stats = part->master->ecc_stats;
- res = part->master->_read(part->master, from + part->offset, len,
+ stats = part->parent->ecc_stats;
+ res = part->parent->_read(part->parent, from + part->offset, len,
retlen, buf);
if (unlikely(mtd_is_eccerr(res)))
mtd->ecc_stats.failed +=
- part->master->ecc_stats.failed - stats.failed;
+ part->parent->ecc_stats.failed - stats.failed;
else
mtd->ecc_stats.corrected +=
- part->master->ecc_stats.corrected - stats.corrected;
+ part->parent->ecc_stats.corrected - stats.corrected;
return res;
}
@@ -84,7 +90,7 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_point(part->master, from + part->offset, len,
+ return part->parent->_point(part->parent, from + part->offset, len,
retlen, virt, phys);
}
@@ -92,7 +98,7 @@ static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_unpoint(part->master, from + part->offset, len);
+ return part->parent->_unpoint(part->parent, from + part->offset, len);
}
static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
@@ -103,7 +109,7 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
struct mtd_part *part = mtd_to_part(mtd);
offset += part->offset;
- return part->master->_get_unmapped_area(part->master, len, offset,
+ return part->parent->_get_unmapped_area(part->parent, len, offset,
flags);
}
@@ -132,7 +138,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
return -EINVAL;
}
- res = part->master->_read_oob(part->master, from + part->offset, ops);
+ res = part->parent->_read_oob(part->parent, from + part->offset, ops);
if (unlikely(res)) {
if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
@@ -146,7 +152,7 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_read_user_prot_reg(part->master, from, len,
+ return part->parent->_read_user_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -154,7 +160,7 @@ static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_user_prot_info(part->master, len, retlen,
+ return part->parent->_get_user_prot_info(part->parent, len, retlen,
buf);
}
@@ -162,7 +168,7 @@ static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_read_fact_prot_reg(part->master, from, len,
+ return part->parent->_read_fact_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -170,7 +176,7 @@ static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_fact_prot_info(part->master, len, retlen,
+ return part->parent->_get_fact_prot_info(part->parent, len, retlen,
buf);
}
@@ -178,7 +184,7 @@ static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_write(part->master, to + part->offset, len,
+ return part->parent->_write(part->parent, to + part->offset, len,
retlen, buf);
}
@@ -186,7 +192,7 @@ static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_panic_write(part->master, to + part->offset, len,
+ return part->parent->_panic_write(part->parent, to + part->offset, len,
retlen, buf);
}
@@ -199,14 +205,14 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
return -EINVAL;
if (ops->datbuf && to + ops->len > mtd->size)
return -EINVAL;
- return part->master->_write_oob(part->master, to + part->offset, ops);
+ return part->parent->_write_oob(part->parent, to + part->offset, ops);
}
static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_write_user_prot_reg(part->master, from, len,
+ return part->parent->_write_user_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -214,14 +220,14 @@ static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_lock_user_prot_reg(part->master, from, len);
+ return part->parent->_lock_user_prot_reg(part->parent, from, len);
}
static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
unsigned long count, loff_t to, size_t *retlen)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_writev(part->master, vecs, count,
+ return part->parent->_writev(part->parent, vecs, count,
to + part->offset, retlen);
}
@@ -231,7 +237,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
int ret;
instr->addr += part->offset;
- ret = part->master->_erase(part->master, instr);
+ ret = part->parent->_erase(part->parent, instr);
if (ret) {
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
@@ -257,51 +263,51 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_lock(part->master, ofs + part->offset, len);
+ return part->parent->_lock(part->parent, ofs + part->offset, len);
}
static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_unlock(part->master, ofs + part->offset, len);
+ return part->parent->_unlock(part->parent, ofs + part->offset, len);
}
static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_is_locked(part->master, ofs + part->offset, len);
+ return part->parent->_is_locked(part->parent, ofs + part->offset, len);
}
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_sync(part->master);
+ part->parent->_sync(part->parent);
}
static int part_suspend(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_suspend(part->master);
+ return part->parent->_suspend(part->parent);
}
static void part_resume(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_resume(part->master);
+ part->parent->_resume(part->parent);
}
static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
- return part->master->_block_isreserved(part->master, ofs);
+ return part->parent->_block_isreserved(part->parent, ofs);
}
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
- return part->master->_block_isbad(part->master, ofs);
+ return part->parent->_block_isbad(part->parent, ofs);
}
static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -310,7 +316,7 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
int res;
ofs += part->offset;
- res = part->master->_block_markbad(part->master, ofs);
+ res = part->parent->_block_markbad(part->parent, ofs);
if (!res)
mtd->ecc_stats.badblocks++;
return res;
@@ -319,13 +325,13 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
static int part_get_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_device(part->master);
+ return part->parent->_get_device(part->parent);
}
static void part_put_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_put_device(part->master);
+ part->parent->_put_device(part->parent);
}
static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
@@ -333,7 +339,7 @@ static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
{
struct mtd_part *part = mtd_to_part(mtd);
- return mtd_ooblayout_ecc(part->master, section, oobregion);
+ return mtd_ooblayout_ecc(part->parent, section, oobregion);
}
static int part_ooblayout_free(struct mtd_info *mtd, int section,
@@ -341,7 +347,7 @@ static int part_ooblayout_free(struct mtd_info *mtd, int section,
{
struct mtd_part *part = mtd_to_part(mtd);
- return mtd_ooblayout_free(part->master, section, oobregion);
+ return mtd_ooblayout_free(part->parent, section, oobregion);
}
static const struct mtd_ooblayout_ops part_ooblayout_ops = {
@@ -353,7 +359,7 @@ static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_max_bad_blocks(part->master,
+ return part->parent->_max_bad_blocks(part->parent,
ofs + part->offset, len);
}
@@ -363,63 +369,70 @@ static inline void free_partition(struct mtd_part *p)
kfree(p);
}
-/*
- * This function unregisters and destroy all slave MTD objects which are
- * attached to the given master MTD object.
+/**
+ * mtd_parse_part - parse MTD partition looking for subpartitions
+ *
+ * @slave: part that is supposed to be a container and should be parsed
+ * @types: NULL-terminated array with names of partition parsers to try
+ *
+ * Some partitions are kind of containers with extra subpartitions (volumes).
+ * There can be various formats of such containers. This function tries to use
+ * specified parsers to analyze given partition and registers found
+ * subpartitions on success.
*/
-
-int del_mtd_partitions(struct mtd_info *master)
+static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
{
- struct mtd_part *slave, *next;
- int ret, err = 0;
+ struct mtd_partitions parsed;
+ int err;
- mutex_lock(&mtd_partitions_mutex);
- list_for_each_entry_safe(slave, next, &mtd_partitions, list)
- if (slave->master == master) {
- ret = del_mtd_device(&slave->mtd);
- if (ret < 0) {
- err = ret;
- continue;
- }
- list_del(&slave->list);
- free_partition(slave);
- }
- mutex_unlock(&mtd_partitions_mutex);
+ err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
+ if (err)
+ return err;
+ else if (!parsed.nr_parts)
+ return -ENOENT;
+
+ err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
+
+ mtd_part_parser_cleanup(&parsed);
return err;
}
-static struct mtd_part *allocate_partition(struct mtd_info *master,
+static struct mtd_part *allocate_partition(struct mtd_info *parent,
const struct mtd_partition *part, int partno,
uint64_t cur_offset)
{
+ int wr_alignment = (parent->flags & MTD_NO_ERASE) ? parent->writesize :
+ parent->erasesize;
struct mtd_part *slave;
+ u32 remainder;
char *name;
+ u64 tmp;
/* allocate the partition structure */
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
name = kstrdup(part->name, GFP_KERNEL);
if (!name || !slave) {
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
- master->name);
+ parent->name);
kfree(name);
kfree(slave);
return ERR_PTR(-ENOMEM);
}
/* set up the MTD object for this partition */
- slave->mtd.type = master->type;
- slave->mtd.flags = master->flags & ~part->mask_flags;
+ slave->mtd.type = parent->type;
+ slave->mtd.flags = parent->flags & ~part->mask_flags;
slave->mtd.size = part->size;
- slave->mtd.writesize = master->writesize;
- slave->mtd.writebufsize = master->writebufsize;
- slave->mtd.oobsize = master->oobsize;
- slave->mtd.oobavail = master->oobavail;
- slave->mtd.subpage_sft = master->subpage_sft;
- slave->mtd.pairing = master->pairing;
+ slave->mtd.writesize = parent->writesize;
+ slave->mtd.writebufsize = parent->writebufsize;
+ slave->mtd.oobsize = parent->oobsize;
+ slave->mtd.oobavail = parent->oobavail;
+ slave->mtd.subpage_sft = parent->subpage_sft;
+ slave->mtd.pairing = parent->pairing;
slave->mtd.name = name;
- slave->mtd.owner = master->owner;
+ slave->mtd.owner = parent->owner;
/* NOTE: Historically, we didn't arrange MTDs as a tree out of
* concern for showing the same data in multiple partitions.
@@ -429,80 +442,81 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
* parent conditional on that option. Note, this is a way to
* distinguish between the master and the partition in sysfs.
*/
- slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
- &master->dev :
- master->dev.parent;
+ slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
+ &parent->dev :
+ parent->dev.parent;
slave->mtd.dev.of_node = part->of_node;
slave->mtd._read = part_read;
slave->mtd._write = part_write;
- if (master->_panic_write)
+ if (parent->_panic_write)
slave->mtd._panic_write = part_panic_write;
- if (master->_point && master->_unpoint) {
+ if (parent->_point && parent->_unpoint) {
slave->mtd._point = part_point;
slave->mtd._unpoint = part_unpoint;
}
- if (master->_get_unmapped_area)
+ if (parent->_get_unmapped_area)
slave->mtd._get_unmapped_area = part_get_unmapped_area;
- if (master->_read_oob)
+ if (parent->_read_oob)
slave->mtd._read_oob = part_read_oob;
- if (master->_write_oob)
+ if (parent->_write_oob)
slave->mtd._write_oob = part_write_oob;
- if (master->_read_user_prot_reg)
+ if (parent->_read_user_prot_reg)
slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
- if (master->_read_fact_prot_reg)
+ if (parent->_read_fact_prot_reg)
slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
- if (master->_write_user_prot_reg)
+ if (parent->_write_user_prot_reg)
slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
- if (master->_lock_user_prot_reg)
+ if (parent->_lock_user_prot_reg)
slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
- if (master->_get_user_prot_info)
+ if (parent->_get_user_prot_info)
slave->mtd._get_user_prot_info = part_get_user_prot_info;
- if (master->_get_fact_prot_info)
+ if (parent->_get_fact_prot_info)
slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
- if (master->_sync)
+ if (parent->_sync)
slave->mtd._sync = part_sync;
- if (!partno && !master->dev.class && master->_suspend &&
- master->_resume) {
- slave->mtd._suspend = part_suspend;
- slave->mtd._resume = part_resume;
+ if (!partno && !parent->dev.class && parent->_suspend &&
+ parent->_resume) {
+ slave->mtd._suspend = part_suspend;
+ slave->mtd._resume = part_resume;
}
- if (master->_writev)
+ if (parent->_writev)
slave->mtd._writev = part_writev;
- if (master->_lock)
+ if (parent->_lock)
slave->mtd._lock = part_lock;
- if (master->_unlock)
+ if (parent->_unlock)
slave->mtd._unlock = part_unlock;
- if (master->_is_locked)
+ if (parent->_is_locked)
slave->mtd._is_locked = part_is_locked;
- if (master->_block_isreserved)
+ if (parent->_block_isreserved)
slave->mtd._block_isreserved = part_block_isreserved;
- if (master->_block_isbad)
+ if (parent->_block_isbad)
slave->mtd._block_isbad = part_block_isbad;
- if (master->_block_markbad)
+ if (parent->_block_markbad)
slave->mtd._block_markbad = part_block_markbad;
- if (master->_max_bad_blocks)
+ if (parent->_max_bad_blocks)
slave->mtd._max_bad_blocks = part_max_bad_blocks;
- if (master->_get_device)
+ if (parent->_get_device)
slave->mtd._get_device = part_get_device;
- if (master->_put_device)
+ if (parent->_put_device)
slave->mtd._put_device = part_put_device;
slave->mtd._erase = part_erase;
- slave->master = master;
+ slave->parent = parent;
slave->offset = part->offset;
if (slave->offset == MTDPART_OFS_APPEND)
slave->offset = cur_offset;
if (slave->offset == MTDPART_OFS_NXTBLK) {
+ tmp = cur_offset;
slave->offset = cur_offset;
- if (mtd_mod_by_eb(cur_offset, master) != 0) {
- /* Round up to next erasesize */
- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
+ remainder = do_div(tmp, wr_alignment);
+ if (remainder) {
+ slave->offset += wr_alignment - remainder;
printk(KERN_NOTICE "Moving partition %d: "
"0x%012llx -> 0x%012llx\n", partno,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
@@ -510,25 +524,25 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
}
if (slave->offset == MTDPART_OFS_RETAIN) {
slave->offset = cur_offset;
- if (master->size - slave->offset >= slave->mtd.size) {
- slave->mtd.size = master->size - slave->offset
+ if (parent->size - slave->offset >= slave->mtd.size) {
+ slave->mtd.size = parent->size - slave->offset
- slave->mtd.size;
} else {
printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
- part->name, master->size - slave->offset,
+ part->name, parent->size - slave->offset,
slave->mtd.size);
/* register to preserve ordering */
goto out_register;
}
}
if (slave->mtd.size == MTDPART_SIZ_FULL)
- slave->mtd.size = master->size - slave->offset;
+ slave->mtd.size = parent->size - slave->offset;
printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
/* let's do some sanity checks */
- if (slave->offset >= master->size) {
+ if (slave->offset >= parent->size) {
/* let's register it anyway to preserve ordering */
slave->offset = 0;
slave->mtd.size = 0;
@@ -536,16 +550,16 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
part->name);
goto out_register;
}
- if (slave->offset + slave->mtd.size > master->size) {
- slave->mtd.size = master->size - slave->offset;
+ if (slave->offset + slave->mtd.size > parent->size) {
+ slave->mtd.size = parent->size - slave->offset;
printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
- part->name, master->name, (unsigned long long)slave->mtd.size);
+ part->name, parent->name, (unsigned long long)slave->mtd.size);
}
- if (master->numeraseregions > 1) {
+ if (parent->numeraseregions > 1) {
/* Deal with variable erase size stuff */
- int i, max = master->numeraseregions;
+ int i, max = parent->numeraseregions;
u64 end = slave->offset + slave->mtd.size;
- struct mtd_erase_region_info *regions = master->eraseregions;
+ struct mtd_erase_region_info *regions = parent->eraseregions;
/* Find the first erase regions which is part of this
* partition. */
@@ -564,37 +578,40 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
BUG_ON(slave->mtd.erasesize == 0);
} else {
/* Single erase size */
- slave->mtd.erasesize = master->erasesize;
+ slave->mtd.erasesize = parent->erasesize;
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ tmp = slave->offset;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
/* Doesn't start on a boundary of major erase size */
/* FIXME: Let it be writable if it is on a boundary of
* _minor_ erase size though */
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
part->name);
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+
+ tmp = slave->mtd.size;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
part->name);
}
mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
- slave->mtd.ecc_step_size = master->ecc_step_size;
- slave->mtd.ecc_strength = master->ecc_strength;
- slave->mtd.bitflip_threshold = master->bitflip_threshold;
+ slave->mtd.ecc_step_size = parent->ecc_step_size;
+ slave->mtd.ecc_strength = parent->ecc_strength;
+ slave->mtd.bitflip_threshold = parent->bitflip_threshold;
- if (master->_block_isbad) {
+ if (parent->_block_isbad) {
uint64_t offs = 0;
while (offs < slave->mtd.size) {
- if (mtd_block_isreserved(master, offs + slave->offset))
+ if (mtd_block_isreserved(parent, offs + slave->offset))
slave->mtd.ecc_stats.bbtblocks++;
- else if (mtd_block_isbad(master, offs + slave->offset))
+ else if (mtd_block_isbad(parent, offs + slave->offset))
slave->mtd.ecc_stats.badblocks++;
offs += slave->mtd.erasesize;
}
@@ -628,7 +645,7 @@ static int mtd_add_partition_attrs(struct mtd_part *new)
return ret;
}
-int mtd_add_partition(struct mtd_info *master, const char *name,
+int mtd_add_partition(struct mtd_info *parent, const char *name,
long long offset, long long length)
{
struct mtd_partition part;
@@ -641,7 +658,7 @@ int mtd_add_partition(struct mtd_info *master, const char *name,
return -EINVAL;
if (length == MTDPART_SIZ_FULL)
- length = master->size - offset;
+ length = parent->size - offset;
if (length <= 0)
return -EINVAL;
@@ -651,7 +668,7 @@ int mtd_add_partition(struct mtd_info *master, const char *name,
part.size = length;
part.offset = offset;
- new = allocate_partition(master, &part, -1, offset);
+ new = allocate_partition(parent, &part, -1, offset);
if (IS_ERR(new))
return PTR_ERR(new);
@@ -667,23 +684,69 @@ int mtd_add_partition(struct mtd_info *master, const char *name,
}
EXPORT_SYMBOL_GPL(mtd_add_partition);
-int mtd_del_partition(struct mtd_info *master, int partno)
+/**
+ * __mtd_del_partition - delete MTD partition
+ *
+ * @priv: internal MTD struct for partition to be deleted
+ *
+ * This function must be called with the partitions mutex locked.
+ */
+static int __mtd_del_partition(struct mtd_part *priv)
+{
+ struct mtd_part *child, *next;
+ int err;
+
+ list_for_each_entry_safe(child, next, &mtd_partitions, list) {
+ if (child->parent == &priv->mtd) {
+ err = __mtd_del_partition(child);
+ if (err)
+ return err;
+ }
+ }
+
+ sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
+
+ err = del_mtd_device(&priv->mtd);
+ if (err)
+ return err;
+
+ list_del(&priv->list);
+ free_partition(priv);
+
+ return 0;
+}
+
+/*
+ * This function unregisters and destroy all slave MTD objects which are
+ * attached to the given MTD object.
+ */
+int del_mtd_partitions(struct mtd_info *mtd)
{
struct mtd_part *slave, *next;
- int ret = -EINVAL;
+ int ret, err = 0;
mutex_lock(&mtd_partitions_mutex);
list_for_each_entry_safe(slave, next, &mtd_partitions, list)
- if ((slave->master == master) &&
- (slave->mtd.index == partno)) {
- sysfs_remove_files(&slave->mtd.dev.kobj,
- mtd_partition_attrs);
- ret = del_mtd_device(&slave->mtd);
+ if (slave->parent == mtd) {
+ ret = __mtd_del_partition(slave);
if (ret < 0)
- break;
+ err = ret;
+ }
+ mutex_unlock(&mtd_partitions_mutex);
+
+ return err;
+}
+
+int mtd_del_partition(struct mtd_info *mtd, int partno)
+{
+ struct mtd_part *slave, *next;
+ int ret = -EINVAL;
- list_del(&slave->list);
- free_partition(slave);
+ mutex_lock(&mtd_partitions_mutex);
+ list_for_each_entry_safe(slave, next, &mtd_partitions, list)
+ if ((slave->parent == mtd) &&
+ (slave->mtd.index == partno)) {
+ ret = __mtd_del_partition(slave);
break;
}
mutex_unlock(&mtd_partitions_mutex);
@@ -724,6 +787,8 @@ int add_mtd_partitions(struct mtd_info *master,
add_mtd_device(&slave->mtd);
mtd_add_partition_attrs(slave);
+ if (parts[i].types)
+ mtd_parse_part(slave, parts[i].types);
cur_offset = slave->offset + slave->mtd.size;
}
@@ -799,6 +864,27 @@ static const char * const default_mtd_part_types[] = {
NULL
};
+static int mtd_part_do_parse(struct mtd_part_parser *parser,
+ struct mtd_info *master,
+ struct mtd_partitions *pparts,
+ struct mtd_part_parser_data *data)
+{
+ int ret;
+
+ ret = (*parser->parse_fn)(master, &pparts->parts, data);
+ pr_debug("%s: parser %s: %i\n", master->name, parser->name, ret);
+ if (ret <= 0)
+ return ret;
+
+ pr_notice("%d %s partitions found on MTD device %s\n", ret,
+ parser->name, master->name);
+
+ pparts->nr_parts = ret;
+ pparts->parser = parser;
+
+ return ret;
+}
+
/**
* parse_mtd_partitions - parse MTD partitions
* @master: the master partition (describes whole MTD device)
@@ -839,16 +925,10 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
parser ? parser->name : NULL);
if (!parser)
continue;
- ret = (*parser->parse_fn)(master, &pparts->parts, data);
- pr_debug("%s: parser %s: %i\n",
- master->name, parser->name, ret);
- if (ret > 0) {
- printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
- ret, parser->name, master->name);
- pparts->nr_parts = ret;
- pparts->parser = parser;
+ ret = mtd_part_do_parse(parser, master, pparts, data);
+ /* Found partitions! */
+ if (ret > 0)
return 0;
- }
mtd_part_parser_put(parser);
/*
* Stash the first error we see; only report it if no parser
@@ -899,6 +979,6 @@ uint64_t mtd_get_device_size(const struct mtd_info *mtd)
if (!mtd_is_partition(mtd))
return mtd->size;
- return mtd_to_part(mtd)->master->size;
+ return mtd_get_device_size(mtd_to_part(mtd)->parent);
}
EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c3029528063b..dbfa72d61d5a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -308,6 +308,7 @@ config MTD_NAND_CS553X
config MTD_NAND_ATMEL
tristate "Support for NAND Flash / SmartMedia on AT91"
depends on ARCH_AT91
+ select MFD_ATMEL_SMC
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
@@ -542,6 +543,7 @@ config MTD_NAND_SUNXI
config MTD_NAND_HISI504
tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ depends on ARCH_HISI || COMPILE_TEST
depends on HAS_DMA
help
Enables support for NAND controller on Hisilicon SoC Hip04.
@@ -555,6 +557,7 @@ config MTD_NAND_QCOM
config MTD_NAND_MTK
tristate "Support for NAND controller on MTK SoCs"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_DMA
help
Enables support for NAND controller on MTK SoCs.
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index 3b2446896147..d922a88e407f 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -57,6 +57,7 @@
#include <linux/interrupt.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/atmel-matrix.h>
+#include <linux/mfd/syscon/atmel-smc.h>
#include <linux/module.h>
#include <linux/mtd/nand.h>
#include <linux/of_address.h>
@@ -64,7 +65,6 @@
#include <linux/of_platform.h>
#include <linux/iopoll.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/atmel.h>
#include <linux/regmap.h>
#include "pmecc.h"
@@ -151,6 +151,8 @@ struct atmel_nand_cs {
void __iomem *virt;
dma_addr_t dma;
} io;
+
+ struct atmel_smc_cs_conf smcconf;
};
struct atmel_nand {
@@ -196,6 +198,8 @@ struct atmel_nand_controller_ops {
void (*nand_init)(struct atmel_nand_controller *nc,
struct atmel_nand *nand);
int (*ecc_init)(struct atmel_nand *nand);
+ int (*setup_data_interface)(struct atmel_nand *nand, int csline,
+ const struct nand_data_interface *conf);
};
struct atmel_nand_controller_caps {
@@ -912,7 +916,7 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip,
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_hsmc_nand_controller *nc;
- int ret;
+ int ret, status;
nc = to_hsmc_nand_controller(chip->controller);
@@ -954,6 +958,10 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip,
dev_err(nc->base.dev, "Failed to program NAND page (err = %d)\n",
ret);
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return ret;
}
@@ -1175,6 +1183,295 @@ static int atmel_hsmc_nand_ecc_init(struct atmel_nand *nand)
return 0;
}
+static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
+ const struct nand_data_interface *conf,
+ struct atmel_smc_cs_conf *smcconf)
+{
+ u32 ncycles, totalcycles, timeps, mckperiodps;
+ struct atmel_nand_controller *nc;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ /* DDR interface not supported. */
+ if (conf->type != NAND_SDR_IFACE)
+ return -ENOTSUPP;
+
+ /*
+ * tRC < 30ns implies EDO mode. This controller does not support this
+ * mode.
+ */
+ if (conf->timings.sdr.tRC_min < 30)
+ return -ENOTSUPP;
+
+ atmel_smc_cs_conf_init(smcconf);
+
+ mckperiodps = NSEC_PER_SEC / clk_get_rate(nc->mck);
+ mckperiodps *= 1000;
+
+ /*
+ * Set write pulse timing. This one is easy to extract:
+ *
+ * NWE_PULSE = tWP
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWP_min, mckperiodps);
+ totalcycles = ncycles;
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * The write setup timing depends on the operation done on the NAND.
+ * All operations goes through the same data bus, but the operation
+ * type depends on the address we are writing to (ALE/CLE address
+ * lines).
+ * Since we have no way to differentiate the different operations at
+ * the SMC level, we must consider the worst case (the biggest setup
+ * time among all operation types):
+ *
+ * NWE_SETUP = max(tCLS, tCS, tALS, tDS) - NWE_PULSE
+ */
+ timeps = max3(conf->timings.sdr.tCLS_min, conf->timings.sdr.tCS_min,
+ conf->timings.sdr.tALS_min);
+ timeps = max(timeps, conf->timings.sdr.tDS_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ ncycles = ncycles > totalcycles ? ncycles - totalcycles : 0;
+ totalcycles += ncycles;
+ ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * As for the write setup timing, the write hold timing depends on the
+ * operation done on the NAND:
+ *
+ * NWE_HOLD = max(tCLH, tCH, tALH, tDH, tWH)
+ */
+ timeps = max3(conf->timings.sdr.tCLH_min, conf->timings.sdr.tCH_min,
+ conf->timings.sdr.tALH_min);
+ timeps = max3(timeps, conf->timings.sdr.tDH_min,
+ conf->timings.sdr.tWH_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ totalcycles += ncycles;
+
+ /*
+ * The write cycle timing is directly matching tWC, but is also
+ * dependent on the other timings on the setup and hold timings we
+ * calculated earlier, which gives:
+ *
+ * NWE_CYCLE = max(tWC, NWE_SETUP + NWE_PULSE + NWE_HOLD)
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWC_min, mckperiodps);
+ ncycles = max(totalcycles, ncycles);
+ ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * We don't want the CS line to be toggled between each byte/word
+ * transfer to the NAND. The only way to guarantee that is to have the
+ * NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means:
+ *
+ * NCS_WR_PULSE = NWE_CYCLE
+ */
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_WR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * As for the write setup timing, the read hold timing depends on the
+ * operation done on the NAND:
+ *
+ * NRD_HOLD = max(tREH, tRHOH)
+ */
+ timeps = max(conf->timings.sdr.tREH_min, conf->timings.sdr.tRHOH_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ totalcycles = ncycles;
+
+ /*
+ * TDF = tRHZ - NRD_HOLD
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRHZ_max, mckperiodps);
+ ncycles -= totalcycles;
+
+ /*
+ * In ONFI 4.0 specs, tRHZ has been increased to support EDO NANDs and
+ * we might end up with a config that does not fit in the TDF field.
+ * Just take the max value in this case and hope that the NAND is more
+ * tolerant than advertised.
+ */
+ if (ncycles > ATMEL_SMC_MODE_TDF_MAX)
+ ncycles = ATMEL_SMC_MODE_TDF_MAX;
+ else if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
+ ncycles = ATMEL_SMC_MODE_TDF_MIN;
+
+ smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles) |
+ ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
+
+ /*
+ * Read pulse timing directly matches tRP:
+ *
+ * NRD_PULSE = tRP
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRP_min, mckperiodps);
+ totalcycles += ncycles;
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NRD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * The write cycle timing is directly matching tWC, but is also
+ * dependent on the setup and hold timings we calculated earlier,
+ * which gives:
+ *
+ * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD)
+ *
+ * NRD_SETUP is always 0.
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps);
+ ncycles = max(totalcycles, ncycles);
+ ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NRD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * We don't want the CS line to be toggled between each byte/word
+ * transfer from the NAND. The only way to guarantee that is to have
+ * the NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means:
+ *
+ * NCS_RD_PULSE = NRD_CYCLE
+ */
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_RD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /* Txxx timings are directly matching tXXX ones. */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tCLR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TCLR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tADL_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TADL_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TAR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TRR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWB_max, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TWB_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /* Attach the CS line to the NFC logic. */
+ smcconf->timings |= ATMEL_HSMC_TIMINGS_NFSEL;
+
+ /* Set the appropriate data bus width. */
+ if (nand->base.options & NAND_BUSWIDTH_16)
+ smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
+
+ /* Operate in NRD/NWE READ/WRITEMODE. */
+ smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD |
+ ATMEL_SMC_MODE_WRITEMODE_NWE;
+
+ return 0;
+}
+
+static int atmel_smc_nand_setup_data_interface(struct atmel_nand *nand,
+ int csline,
+ const struct nand_data_interface *conf)
+{
+ struct atmel_nand_controller *nc;
+ struct atmel_smc_cs_conf smcconf;
+ struct atmel_nand_cs *cs;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ cs = &nand->cs[csline];
+ cs->smcconf = smcconf;
+ atmel_smc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+
+ return 0;
+}
+
+static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
+ int csline,
+ const struct nand_data_interface *conf)
+{
+ struct atmel_nand_controller *nc;
+ struct atmel_smc_cs_conf smcconf;
+ struct atmel_nand_cs *cs;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ cs = &nand->cs[csline];
+ cs->smcconf = smcconf;
+
+ if (cs->rb.type == ATMEL_NAND_NATIVE_RB)
+ cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id);
+
+ atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+
+ return 0;
+}
+
+static int atmel_nand_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct atmel_nand *nand = to_atmel_nand(chip);
+ struct atmel_nand_controller *nc;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ if (csline >= nand->numcs ||
+ (csline < 0 && csline != NAND_DATA_IFACE_CHECK_ONLY))
+ return -EINVAL;
+
+ return nc->caps->ops->setup_data_interface(nand, csline, conf);
+}
+
static void atmel_nand_init(struct atmel_nand_controller *nc,
struct atmel_nand *nand)
{
@@ -1192,6 +1489,9 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
chip->write_buf = atmel_nand_write_buf;
chip->select_chip = atmel_nand_select_chip;
+ if (nc->mck && nc->caps->ops->setup_data_interface)
+ chip->setup_data_interface = atmel_nand_setup_data_interface;
+
/* Some NANDs require a longer delay than the default one (20us). */
chip->chip_delay = 40;
@@ -1677,6 +1977,12 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
if (nc->caps->legacy_of_bindings)
return 0;
+ nc->mck = of_clk_get(dev->parent->of_node, 0);
+ if (IS_ERR(nc->mck)) {
+ dev_err(dev, "Failed to retrieve MCK clk\n");
+ return PTR_ERR(nc->mck);
+ }
+
np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
if (!np) {
dev_err(dev, "Missing or invalid atmel,smc property\n");
@@ -1983,6 +2289,7 @@ static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = {
.remove = atmel_hsmc_nand_controller_remove,
.ecc_init = atmel_hsmc_nand_ecc_init,
.nand_init = atmel_hsmc_nand_init,
+ .setup_data_interface = atmel_hsmc_nand_setup_data_interface,
};
static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = {
@@ -2037,7 +2344,14 @@ atmel_smc_nand_controller_remove(struct atmel_nand_controller *nc)
return 0;
}
-static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
+/*
+ * The SMC reg layout of at91rm9200 is completely different which prevents us
+ * from re-using atmel_smc_nand_setup_data_interface() for the
+ * ->setup_data_interface() hook.
+ * At this point, there's no support for the at91rm9200 SMC IP, so we leave
+ * ->setup_data_interface() unassigned.
+ */
+static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
.probe = atmel_smc_nand_controller_probe,
.remove = atmel_smc_nand_controller_remove,
.ecc_init = atmel_nand_ecc_init,
@@ -2047,6 +2361,20 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = {
.ale_offs = BIT(21),
.cle_offs = BIT(22),
+ .ops = &at91rm9200_nc_ops,
+};
+
+static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
+ .probe = atmel_smc_nand_controller_probe,
+ .remove = atmel_smc_nand_controller_remove,
+ .ecc_init = atmel_nand_ecc_init,
+ .nand_init = atmel_smc_nand_init,
+ .setup_data_interface = atmel_smc_nand_setup_data_interface,
+};
+
+static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
+ .ale_offs = BIT(21),
+ .cle_offs = BIT(22),
.ops = &atmel_smc_nc_ops,
};
@@ -2093,7 +2421,7 @@ static const struct of_device_id atmel_nand_controller_of_ids[] = {
},
{
.compatible = "atmel,at91sam9260-nand-controller",
- .data = &atmel_rm9200_nc_caps,
+ .data = &atmel_sam9260_nc_caps,
},
{
.compatible = "atmel,at91sam9261-nand-controller",
@@ -2181,6 +2509,24 @@ static int atmel_nand_controller_remove(struct platform_device *pdev)
return nc->caps->ops->remove(nc);
}
+static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
+{
+ struct atmel_nand_controller *nc = dev_get_drvdata(dev);
+ struct atmel_nand *nand;
+
+ list_for_each_entry(nand, &nc->chips, node) {
+ int i;
+
+ for (i = 0; i < nand->numcs; i++)
+ nand_reset(&nand->base, i);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_nand_controller_pm_ops, NULL,
+ atmel_nand_controller_resume);
+
static struct platform_driver atmel_nand_controller_driver = {
.driver = {
.name = "atmel-nand-controller",
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
index f1da4ea88f2c..54bac5b73f0a 100644
--- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -392,6 +392,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+ b47n->nand_chip.onfi_set_features = nand_onfi_get_set_features_notsupp;
+ b47n->nand_chip.onfi_get_features = nand_onfi_get_set_features_notsupp;
nand_chip->chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index d40c32d311d8..2fd733eba0a3 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -654,6 +654,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.read_buf = cafe_read_buf;
cafe->nand.write_buf = cafe_write_buf;
cafe->nand.select_chip = cafe_select_chip;
+ cafe->nand.onfi_set_features = nand_onfi_get_set_features_notsupp;
+ cafe->nand.onfi_get_features = nand_onfi_get_set_features_notsupp;
cafe->nand.chip_delay = 0;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 531c51991e57..7b26e53b95b1 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -771,11 +771,14 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
info->chip.ecc.bytes = 10;
info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
+ info->chip.ecc.algo = NAND_ECC_BCH;
} else {
+ /* 1bit ecc hamming */
info->chip.ecc.calculate = nand_davinci_calculate_1bit;
info->chip.ecc.correct = nand_davinci_correct_1bit;
info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
info->chip.ecc.bytes = 3;
+ info->chip.ecc.algo = NAND_ECC_HAMMING;
}
info->chip.ecc.size = 512;
info->chip.ecc.strength = pdata->ecc_bits;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 16634df2e39a..d723be352148 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -23,50 +23,43 @@
#include <linux/mutex.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "denali.h"
MODULE_LICENSE("GPL");
-/*
- * We define a module parameter that allows the user to override
- * the hardware and decide what timing mode should be used.
- */
-#define NAND_DEFAULT_TIMINGS -1
+#define DENALI_NAND_NAME "denali-nand"
-static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
-module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode,
- "Overrides default ONFI setting. -1 indicates use default timings");
+/* Host Data/Command Interface */
+#define DENALI_HOST_ADDR 0x00
+#define DENALI_HOST_DATA 0x10
-#define DENALI_NAND_NAME "denali-nand"
+#define DENALI_MAP00 (0 << 26) /* direct access to buffer */
+#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
+#define DENALI_MAP10 (2 << 26) /* high-level control plane */
+#define DENALI_MAP11 (3 << 26) /* direct controller access */
-/*
- * We define a macro here that combines all interrupts this driver uses into
- * a single constant value, for convenience.
- */
-#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \
- INTR__ECC_TRANSACTION_DONE | \
- INTR__ECC_ERR | \
- INTR__PROGRAM_FAIL | \
- INTR__LOAD_COMP | \
- INTR__PROGRAM_COMP | \
- INTR__TIME_OUT | \
- INTR__ERASE_FAIL | \
- INTR__RST_COMP | \
- INTR__ERASE_COMP)
+/* MAP11 access cycle type */
+#define DENALI_MAP11_CMD ((DENALI_MAP11) | 0) /* command cycle */
+#define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */
+#define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */
-/*
- * indicates whether or not the internal value for the flash bank is
- * valid or not
- */
-#define CHIP_SELECT_INVALID -1
+/* MAP10 commands */
+#define DENALI_ERASE 0x01
+
+#define DENALI_BANK(denali) ((denali)->active_bank << 24)
+
+#define DENALI_INVALID_BANK -1
+#define DENALI_NR_BANKS 4
/*
- * This macro divides two integers and rounds fractional values up
- * to the nearest integer value.
+ * The bus interface clock, clk_x, is phase aligned with the core clock. The
+ * clk_x is an integral multiple N of the core clk. The value N is configured
+ * at IP delivery time, and its available value is 4, 5, or 6. We need to align
+ * to the largest value to make it work with any possible configuration.
*/
-#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
+#define DENALI_CLK_X_MULT 6
/*
* this macro allows us to convert from an MTD structure to our own
@@ -77,339 +70,11 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
}
-/*
- * These constants are defined by the driver to enable common driver
- * configuration options.
- */
-#define SPARE_ACCESS 0x41
-#define MAIN_ACCESS 0x42
-#define MAIN_SPARE_ACCESS 0x43
-
-#define DENALI_READ 0
-#define DENALI_WRITE 0x100
-
-/*
- * this is a helper macro that allows us to
- * format the bank into the proper bits for the controller
- */
-#define BANK(x) ((x) << 24)
-
-/* forward declarations */
-static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali,
- uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali,
- uint32_t int_mask);
-static uint32_t read_interrupt_status(struct denali_nand_info *denali);
-
-/*
- * Certain operations for the denali NAND controller use an indexed mode to
- * read/write data. The operation is performed by writing the address value
- * of the command to the device memory followed by the data. This function
- * abstracts this common operation.
- */
-static void index_addr(struct denali_nand_info *denali,
- uint32_t address, uint32_t data)
-{
- iowrite32(address, denali->flash_mem);
- iowrite32(data, denali->flash_mem + 0x10);
-}
-
-/* Perform an indexed read of the device */
-static void index_addr_read_data(struct denali_nand_info *denali,
- uint32_t address, uint32_t *pdata)
-{
- iowrite32(address, denali->flash_mem);
- *pdata = ioread32(denali->flash_mem + 0x10);
-}
-
-/*
- * We need to buffer some data for some of the NAND core routines.
- * The operations manage buffering that data.
- */
-static void reset_buf(struct denali_nand_info *denali)
-{
- denali->buf.head = denali->buf.tail = 0;
-}
-
-static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
-{
- denali->buf.buf[denali->buf.tail++] = byte;
-}
-
-/* reads the status of the device */
-static void read_status(struct denali_nand_info *denali)
-{
- uint32_t cmd;
-
- /* initialize the data buffer to store status */
- reset_buf(denali);
-
- cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
- if (cmd)
- write_byte_to_buf(denali, NAND_STATUS_WP);
- else
- write_byte_to_buf(denali, 0);
-}
-
-/* resets a specific device connected to the core */
-static void reset_bank(struct denali_nand_info *denali)
-{
- uint32_t irq_status;
- uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT;
-
- clear_interrupts(denali);
-
- iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET);
-
- irq_status = wait_for_irq(denali, irq_mask);
-
- if (irq_status & INTR__TIME_OUT)
- dev_err(denali->dev, "reset bank failed.\n");
-}
-
-/* Reset the flash controller */
-static uint16_t denali_nand_reset(struct denali_nand_info *denali)
-{
- int i;
-
- for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
- denali->flash_reg + INTR_STATUS(i));
-
- for (i = 0; i < denali->max_banks; i++) {
- iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
- while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) &
- (INTR__RST_COMP | INTR__TIME_OUT)))
- cpu_relax();
- if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
- INTR__TIME_OUT)
- dev_dbg(denali->dev,
- "NAND Reset operation timed out on bank %d\n", i);
- }
-
- for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
- denali->flash_reg + INTR_STATUS(i));
-
- return PASS;
-}
-
-/*
- * this routine calculates the ONFI timing values for a given mode and
- * programs the clocking register accordingly. The mode is determined by
- * the get_onfi_nand_para routine.
- */
-static void nand_onfi_timing_set(struct denali_nand_info *denali,
- uint16_t mode)
-{
- uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
- uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
- uint16_t Treh[6] = {30, 15, 15, 10, 10, 7};
- uint16_t Trc[6] = {100, 50, 35, 30, 25, 20};
- uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15};
- uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5};
- uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25};
- uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70};
- uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100};
- uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100};
- uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60};
- uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15};
-
- uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
- uint16_t dv_window = 0;
- uint16_t en_lo, en_hi;
- uint16_t acc_clks;
- uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
-
- en_lo = CEIL_DIV(Trp[mode], CLK_X);
- en_hi = CEIL_DIV(Treh[mode], CLK_X);
-#if ONFI_BLOOM_TIME
- if ((en_hi * CLK_X) < (Treh[mode] + 2))
- en_hi++;
-#endif
-
- if ((en_lo + en_hi) * CLK_X < Trc[mode])
- en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
-
- if ((en_lo + en_hi) < CLK_MULTI)
- en_lo += CLK_MULTI - en_lo - en_hi;
-
- while (dv_window < 8) {
- data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
-
- data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
-
- data_invalid = data_invalid_rhoh < data_invalid_rloh ?
- data_invalid_rhoh : data_invalid_rloh;
-
- dv_window = data_invalid - Trea[mode];
-
- if (dv_window < 8)
- en_lo++;
- }
-
- acc_clks = CEIL_DIV(Trea[mode], CLK_X);
-
- while (acc_clks * CLK_X - Trea[mode] < 3)
- acc_clks++;
-
- if (data_invalid - acc_clks * CLK_X < 2)
- dev_warn(denali->dev, "%s, Line %d: Warning!\n",
- __FILE__, __LINE__);
-
- addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
- re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
- re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
- we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
- cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
- if (cs_cnt == 0)
- cs_cnt = 1;
-
- if (Tcea[mode]) {
- while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode])
- cs_cnt++;
- }
-
-#if MODE5_WORKAROUND
- if (mode == 5)
- acc_clks = 5;
-#endif
-
- /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
- if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 &&
- ioread32(denali->flash_reg + DEVICE_ID) == 0x88)
- acc_clks = 6;
-
- iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
- iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
- iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
- iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
- iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
- iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
- iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
- iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
-}
-
-/* queries the NAND device to see what ONFI modes it supports. */
-static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
+static void denali_host_write(struct denali_nand_info *denali,
+ uint32_t addr, uint32_t data)
{
- int i;
-
- /*
- * we needn't to do a reset here because driver has already
- * reset all the banks before
- */
- if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
- ONFI_TIMING_MODE__VALUE))
- return FAIL;
-
- for (i = 5; i > 0; i--) {
- if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
- (0x01 << i))
- break;
- }
-
- nand_onfi_timing_set(denali, i);
-
- /*
- * By now, all the ONFI devices we know support the page cache
- * rw feature. So here we enable the pipeline_rw_ahead feature
- */
- /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
- /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */
-
- return PASS;
-}
-
-static void get_samsung_nand_para(struct denali_nand_info *denali,
- uint8_t device_id)
-{
- if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
- /* Set timing register values according to datasheet */
- iowrite32(5, denali->flash_reg + ACC_CLKS);
- iowrite32(20, denali->flash_reg + RE_2_WE);
- iowrite32(12, denali->flash_reg + WE_2_RE);
- iowrite32(14, denali->flash_reg + ADDR_2_DATA);
- iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
- iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
- iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
- }
-}
-
-static void get_toshiba_nand_para(struct denali_nand_info *denali)
-{
- /*
- * Workaround to fix a controller bug which reports a wrong
- * spare area size for some kind of Toshiba NAND device
- */
- if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
- (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64))
- iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-}
-
-static void get_hynix_nand_para(struct denali_nand_info *denali,
- uint8_t device_id)
-{
- switch (device_id) {
- case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
- case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
- iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
- iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
- break;
- default:
- dev_warn(denali->dev,
- "Unknown Hynix NAND (Device ID: 0x%x).\n"
- "Will use default parameter values instead.\n",
- device_id);
- }
-}
-
-/*
- * determines how many NAND chips are connected to the controller. Note for
- * Intel CE4100 devices we don't support more than one device.
- */
-static void find_valid_banks(struct denali_nand_info *denali)
-{
- uint32_t id[denali->max_banks];
- int i;
-
- denali->total_used_banks = 1;
- for (i = 0; i < denali->max_banks; i++) {
- index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
- index_addr(denali, MODE_11 | (i << 24) | 1, 0);
- index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
-
- dev_dbg(denali->dev,
- "Return 1st ID for bank[%d]: %x\n", i, id[i]);
-
- if (i == 0) {
- if (!(id[i] & 0x0ff))
- break; /* WTF? */
- } else {
- if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
- denali->total_used_banks++;
- else
- break;
- }
- }
-
- if (denali->platform == INTEL_CE4100) {
- /*
- * Platform limitations of the CE4100 device limit
- * users to a single chip solution for NAND.
- * Multichip support is not enabled.
- */
- if (denali->total_used_banks != 1) {
- dev_err(denali->dev,
- "Sorry, Intel CE4100 only supports a single NAND device.\n");
- BUG();
- }
- }
- dev_dbg(denali->dev,
- "denali->total_used_banks: %d\n", denali->total_used_banks);
+ iowrite32(addr, denali->host + DENALI_HOST_ADDR);
+ iowrite32(data, denali->host + DENALI_HOST_DATA);
}
/*
@@ -418,7 +83,7 @@ static void find_valid_banks(struct denali_nand_info *denali)
*/
static void detect_max_banks(struct denali_nand_info *denali)
{
- uint32_t features = ioread32(denali->flash_reg + FEATURES);
+ uint32_t features = ioread32(denali->reg + FEATURES);
denali->max_banks = 1 << (features & FEATURES__N_BANKS);
@@ -427,227 +92,120 @@ static void detect_max_banks(struct denali_nand_info *denali)
denali->max_banks <<= 1;
}
-static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
+static void denali_enable_irq(struct denali_nand_info *denali)
{
- uint16_t status = PASS;
- uint32_t id_bytes[8], addr;
- uint8_t maf_id, device_id;
int i;
- /*
- * Use read id method to get device ID and other params.
- * For some NAND chips, controller can't report the correct
- * device ID by reading from DEVICE_ID register
- */
- addr = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, addr | 0, 0x90);
- index_addr(denali, addr | 1, 0);
- for (i = 0; i < 8; i++)
- index_addr_read_data(denali, addr | 2, &id_bytes[i]);
- maf_id = id_bytes[0];
- device_id = id_bytes[1];
-
- if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
- ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
- if (FAIL == get_onfi_nand_para(denali))
- return FAIL;
- } else if (maf_id == 0xEC) { /* Samsung NAND */
- get_samsung_nand_para(denali, device_id);
- } else if (maf_id == 0x98) { /* Toshiba NAND */
- get_toshiba_nand_para(denali);
- } else if (maf_id == 0xAD) { /* Hynix NAND */
- get_hynix_nand_para(denali, device_id);
- }
-
- dev_info(denali->dev,
- "Dump timing register values:\n"
- "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
- "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
- "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
- ioread32(denali->flash_reg + ACC_CLKS),
- ioread32(denali->flash_reg + RE_2_WE),
- ioread32(denali->flash_reg + RE_2_RE),
- ioread32(denali->flash_reg + WE_2_RE),
- ioread32(denali->flash_reg + ADDR_2_DATA),
- ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
- ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
- ioread32(denali->flash_reg + CS_SETUP_CNT));
-
- find_valid_banks(denali);
-
- /*
- * If the user specified to override the default timings
- * with a specific ONFI mode, we apply those changes here.
- */
- if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
- nand_onfi_timing_set(denali, onfi_timing_mode);
-
- return status;
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ iowrite32(U32_MAX, denali->reg + INTR_EN(i));
+ iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE);
}
-static void denali_set_intr_modes(struct denali_nand_info *denali,
- uint16_t INT_ENABLE)
+static void denali_disable_irq(struct denali_nand_info *denali)
{
- if (INT_ENABLE)
- iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
- else
- iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
-}
-
-/*
- * validation function to verify that the controlling software is making
- * a valid request
- */
-static inline bool is_flash_bank_valid(int flash_bank)
-{
- return flash_bank >= 0 && flash_bank < 4;
-}
-
-static void denali_irq_init(struct denali_nand_info *denali)
-{
- uint32_t int_mask;
int i;
- /* Disable global interrupts */
- denali_set_intr_modes(denali, false);
-
- int_mask = DENALI_IRQ_ALL;
-
- /* Clear all status bits */
- for (i = 0; i < denali->max_banks; ++i)
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i));
-
- denali_irq_enable(denali, int_mask);
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ iowrite32(0, denali->reg + INTR_EN(i));
+ iowrite32(0, denali->reg + GLOBAL_INT_ENABLE);
}
-static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
+static void denali_clear_irq(struct denali_nand_info *denali,
+ int bank, uint32_t irq_status)
{
- denali_set_intr_modes(denali, false);
+ /* write one to clear bits */
+ iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
}
-static void denali_irq_enable(struct denali_nand_info *denali,
- uint32_t int_mask)
+static void denali_clear_irq_all(struct denali_nand_info *denali)
{
int i;
- for (i = 0; i < denali->max_banks; ++i)
- iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ denali_clear_irq(denali, i, U32_MAX);
}
-/*
- * This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts
- */
-static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
+static irqreturn_t denali_isr(int irq, void *dev_id)
{
- return read_interrupt_status(denali) & DENALI_IRQ_ALL;
-}
+ struct denali_nand_info *denali = dev_id;
+ irqreturn_t ret = IRQ_NONE;
+ uint32_t irq_status;
+ int i;
-/* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali,
- uint32_t irq_mask)
-{
- uint32_t intr_status_reg;
+ spin_lock(&denali->irq_lock);
- intr_status_reg = INTR_STATUS(denali->flash_bank);
+ for (i = 0; i < DENALI_NR_BANKS; i++) {
+ irq_status = ioread32(denali->reg + INTR_STATUS(i));
+ if (irq_status)
+ ret = IRQ_HANDLED;
- iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
-}
+ denali_clear_irq(denali, i, irq_status);
-static void clear_interrupts(struct denali_nand_info *denali)
-{
- uint32_t status;
+ if (i != denali->active_bank)
+ continue;
- spin_lock_irq(&denali->irq_lock);
+ denali->irq_status |= irq_status;
- status = read_interrupt_status(denali);
- clear_interrupt(denali, status);
+ if (denali->irq_status & denali->irq_mask)
+ complete(&denali->complete);
+ }
+
+ spin_unlock(&denali->irq_lock);
- denali->irq_status = 0x0;
- spin_unlock_irq(&denali->irq_lock);
+ return ret;
}
-static uint32_t read_interrupt_status(struct denali_nand_info *denali)
+static void denali_reset_irq(struct denali_nand_info *denali)
{
- uint32_t intr_status_reg;
-
- intr_status_reg = INTR_STATUS(denali->flash_bank);
+ unsigned long flags;
- return ioread32(denali->flash_reg + intr_status_reg);
+ spin_lock_irqsave(&denali->irq_lock, flags);
+ denali->irq_status = 0;
+ denali->irq_mask = 0;
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
}
-/*
- * This is the interrupt service routine. It handles all interrupts
- * sent to this device. Note that on CE4100, this is a shared interrupt.
- */
-static irqreturn_t denali_isr(int irq, void *dev_id)
+static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
+ uint32_t irq_mask)
{
- struct denali_nand_info *denali = dev_id;
+ unsigned long time_left, flags;
uint32_t irq_status;
- irqreturn_t result = IRQ_NONE;
- spin_lock(&denali->irq_lock);
+ spin_lock_irqsave(&denali->irq_lock, flags);
- /* check to see if a valid NAND chip has been selected. */
- if (is_flash_bank_valid(denali->flash_bank)) {
- /*
- * check to see if controller generated the interrupt,
- * since this is a shared interrupt
- */
- irq_status = denali_irq_detected(denali);
- if (irq_status != 0) {
- /* handle interrupt */
- /* first acknowledge it */
- clear_interrupt(denali, irq_status);
- /*
- * store the status in the device context for someone
- * to read
- */
- denali->irq_status |= irq_status;
- /* notify anyone who cares that it happened */
- complete(&denali->complete);
- /* tell the OS that we've handled this */
- result = IRQ_HANDLED;
- }
+ irq_status = denali->irq_status;
+
+ if (irq_mask & irq_status) {
+ /* return immediately if the IRQ has already happened. */
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+ return irq_status;
}
- spin_unlock(&denali->irq_lock);
- return result;
-}
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
-{
- unsigned long comp_res;
- uint32_t intr_status;
- unsigned long timeout = msecs_to_jiffies(1000);
+ denali->irq_mask = irq_mask;
+ reinit_completion(&denali->complete);
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
- do {
- comp_res =
- wait_for_completion_timeout(&denali->complete, timeout);
- spin_lock_irq(&denali->irq_lock);
- intr_status = denali->irq_status;
-
- if (intr_status & irq_mask) {
- denali->irq_status &= ~irq_mask;
- spin_unlock_irq(&denali->irq_lock);
- /* our interrupt was detected */
- break;
- }
+ time_left = wait_for_completion_timeout(&denali->complete,
+ msecs_to_jiffies(1000));
+ if (!time_left) {
+ dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
+ denali->irq_mask);
+ return 0;
+ }
- /*
- * these are not the interrupts you are looking for -
- * need to wait again
- */
- spin_unlock_irq(&denali->irq_lock);
- } while (comp_res != 0);
+ return denali->irq_status;
+}
+
+static uint32_t denali_check_irq(struct denali_nand_info *denali)
+{
+ unsigned long flags;
+ uint32_t irq_status;
- if (comp_res == 0) {
- /* timeout */
- pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
- intr_status, irq_mask);
+ spin_lock_irqsave(&denali->irq_lock, flags);
+ irq_status = denali->irq_status;
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
- intr_status = 0;
- }
- return intr_status;
+ return irq_status;
}
/*
@@ -664,153 +222,111 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
/* Enable spare area/ECC per user's request. */
- iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
- iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+ iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE);
+ iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG);
}
-/*
- * sends a pipeline command operation to the controller. See the Denali NAND
- * controller's user guide for more information (section 4.2.3.6).
- */
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
- bool ecc_en, bool transfer_spare,
- int access_type, int op)
+static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- int status = PASS;
- uint32_t addr, cmd;
-
- setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int i;
- clear_interrupts(denali);
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- addr = BANK(denali->flash_bank) | denali->page;
+ for (i = 0; i < len; i++)
+ buf[i] = ioread32(denali->host + DENALI_HOST_DATA);
+}
- if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
- /* read spare area */
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, access_type);
+static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int i;
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_READ) {
- /* setup page read request for access type */
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, access_type);
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- }
- return status;
+ for (i = 0; i < len; i++)
+ iowrite32(buf[i], denali->host + DENALI_HOST_DATA);
}
-/* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali,
- const uint8_t *buf, int len)
+static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
- uint32_t *buf32;
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint16_t *buf16 = (uint16_t *)buf;
int i;
- /*
- * verify that the len is a multiple of 4.
- * see comment in read_data_from_flash_mem()
- */
- BUG_ON((len % 4) != 0);
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- /* write the data to the flash memory */
- buf32 = (uint32_t *)buf;
- for (i = 0; i < len / 4; i++)
- iowrite32(*buf32++, denali->flash_mem + 0x10);
- return i * 4; /* intent is to return the number of bytes read */
+ for (i = 0; i < len / 2; i++)
+ buf16[i] = ioread32(denali->host + DENALI_HOST_DATA);
}
-/* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali,
- uint8_t *buf, int len)
+static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
{
- uint32_t *buf32;
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ const uint16_t *buf16 = (const uint16_t *)buf;
int i;
- /*
- * we assume that len will be a multiple of 4, if not it would be nice
- * to know about it ASAP rather than have random failures...
- * This assumption is based on the fact that this function is designed
- * to be used to read flash pages, which are typically multiples of 4.
- */
- BUG_ON((len % 4) != 0);
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- /* transfer the data from the flash */
- buf32 = (uint32_t *)buf;
- for (i = 0; i < len / 4; i++)
- *buf32++ = ioread32(denali->flash_mem + 0x10);
- return i * 4; /* intent is to return the number of bytes read */
+ for (i = 0; i < len / 2; i++)
+ iowrite32(buf16[i], denali->host + DENALI_HOST_DATA);
}
-/* writes OOB data to the device */
-static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+static uint8_t denali_read_byte(struct mtd_info *mtd)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_status;
- uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL;
- int status = 0;
+ uint8_t byte;
- denali->page = page;
+ denali_read_buf(mtd, &byte, 1);
- if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS) {
- write_data_to_flash_mem(denali, buf, mtd->oobsize);
+ return byte;
+}
- /* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
+static void denali_write_byte(struct mtd_info *mtd, uint8_t byte)
+{
+ denali_write_buf(mtd, &byte, 1);
+}
- if (irq_status == 0) {
- dev_err(denali->dev, "OOB write failed\n");
- status = -EIO;
- }
- } else {
- dev_err(denali->dev, "unable to send pipeline command\n");
- status = -EIO;
- }
- return status;
+static uint16_t denali_read_word(struct mtd_info *mtd)
+{
+ uint16_t word;
+
+ denali_read_buf16(mtd, (uint8_t *)&word, 2);
+
+ return word;
}
-/* reads OOB data from the device */
-static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR__LOAD_COMP;
- uint32_t irq_status, addr, cmd;
+ uint32_t type;
- denali->page = page;
+ if (ctrl & NAND_CLE)
+ type = DENALI_MAP11_CMD;
+ else if (ctrl & NAND_ALE)
+ type = DENALI_MAP11_ADDR;
+ else
+ return;
- if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS) {
- read_data_from_flash_mem(denali, buf, mtd->oobsize);
+ /*
+ * Some commands are followed by chip->dev_ready or chip->waitfunc.
+ * irq_status must be cleared here to catch the R/B# interrupt later.
+ */
+ if (ctrl & NAND_CTRL_CHANGE)
+ denali_reset_irq(denali);
- /*
- * wait for command to be accepted
- * can always use status0 bit as the
- * mask is identical for each bank.
- */
- irq_status = wait_for_irq(denali, irq_mask);
+ denali_host_write(denali, DENALI_BANK(denali) | type, dat);
+}
- if (irq_status == 0)
- dev_err(denali->dev, "page on OOB timeout %d\n",
- denali->page);
+static int denali_dev_ready(struct mtd_info *mtd)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
- /*
- * We set the device back to MAIN_ACCESS here as I observed
- * instability with the controller if you do a block erase
- * and the last transaction was a SPARE_ACCESS. Block erase
- * is reliable (according to the MTD test infrastructure)
- * if you are in MAIN_ACCESS.
- */
- addr = BANK(denali->flash_bank) | denali->page;
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, MAIN_ACCESS);
- }
+ return !!(denali_check_irq(denali) & INTR__INT_ACT);
}
static int denali_check_erased_page(struct mtd_info *mtd,
@@ -856,11 +372,11 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
unsigned long *uncor_ecc_flags)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- int bank = denali->flash_bank;
+ int bank = denali->active_bank;
uint32_t ecc_cor;
unsigned int max_bitflips;
- ecc_cor = ioread32(denali->flash_reg + ECC_COR_INFO(bank));
+ ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank));
ecc_cor >>= ECC_COR_INFO__SHIFT(bank);
if (ecc_cor & ECC_COR_INFO__UNCOR_ERR) {
@@ -886,8 +402,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
return max_bitflips;
}
-#define ECC_SECTOR_SIZE 512
-
#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
@@ -899,22 +413,23 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
struct denali_nand_info *denali,
unsigned long *uncor_ecc_flags, uint8_t *buf)
{
+ unsigned int ecc_size = denali->nand.ecc.size;
unsigned int bitflips = 0;
unsigned int max_bitflips = 0;
uint32_t err_addr, err_cor_info;
unsigned int err_byte, err_sector, err_device;
uint8_t err_cor_value;
unsigned int prev_sector = 0;
+ uint32_t irq_status;
- /* read the ECC errors. we'll ignore them for now */
- denali_set_intr_modes(denali, false);
+ denali_reset_irq(denali);
do {
- err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS);
+ err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
err_sector = ECC_SECTOR(err_addr);
err_byte = ECC_BYTE(err_addr);
- err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO);
+ err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
err_device = ECC_ERR_DEVICE(err_cor_info);
@@ -928,9 +443,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
* an erased sector.
*/
*uncor_ecc_flags |= BIT(err_sector);
- } else if (err_byte < ECC_SECTOR_SIZE) {
+ } else if (err_byte < ecc_size) {
/*
- * If err_byte is larger than ECC_SECTOR_SIZE, means error
+ * If err_byte is larger than ecc_size, means error
* happened in OOB, so we ignore it. It's no need for
* us to correct it err_device is represented the NAND
* error bits are happened in if there are more than
@@ -939,8 +454,8 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
int offset;
unsigned int flips_in_byte;
- offset = (err_sector * ECC_SECTOR_SIZE + err_byte) *
- denali->devnum + err_device;
+ offset = (err_sector * ecc_size + err_byte) *
+ denali->devs_per_cs + err_device;
/* correct the ECC error */
flips_in_byte = hweight8(buf[offset] ^ err_cor_value);
@@ -959,10 +474,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
* ECC_TRANSACTION_DONE interrupt, so here just wait for
* a while for this interrupt
*/
- while (!(read_interrupt_status(denali) & INTR__ECC_TRANSACTION_DONE))
- cpu_relax();
- clear_interrupts(denali);
- denali_set_intr_modes(denali, true);
+ irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
+ if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
+ return -EIO;
return max_bitflips;
}
@@ -970,17 +484,17 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
/* programs the controller to either enable/disable DMA transfers */
static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
- iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
- ioread32(denali->flash_reg + DMA_ENABLE);
+ iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE);
+ ioread32(denali->reg + DMA_ENABLE);
}
-static void denali_setup_dma64(struct denali_nand_info *denali, int op)
+static void denali_setup_dma64(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
- uint64_t addr = denali->buf.dma_buf;
- mode = MODE_10 | BANK(denali->flash_bank) | denali->page;
+ mode = DENALI_MAP10 | DENALI_BANK(denali) | page;
/* DMA is a three step process */
@@ -988,191 +502,354 @@ static void denali_setup_dma64(struct denali_nand_info *denali, int op)
* 1. setup transfer type, interrupt when complete,
* burst len = 64 bytes, the number of pages
*/
- index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count);
+ denali_host_write(denali, mode,
+ 0x01002000 | (64 << 16) | (write << 8) | page_count);
/* 2. set memory low address */
- index_addr(denali, mode, addr);
+ denali_host_write(denali, mode, dma_addr);
/* 3. set memory high address */
- index_addr(denali, mode, addr >> 32);
+ denali_host_write(denali, mode, (uint64_t)dma_addr >> 32);
}
-static void denali_setup_dma32(struct denali_nand_info *denali, int op)
+static void denali_setup_dma32(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
- uint32_t addr = denali->buf.dma_buf;
- mode = MODE_10 | BANK(denali->flash_bank);
+ mode = DENALI_MAP10 | DENALI_BANK(denali);
/* DMA is a four step process */
/* 1. setup transfer type and # of pages */
- index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
+ denali_host_write(denali, mode | page,
+ 0x2000 | (write << 8) | page_count);
/* 2. set memory high address bits 23:8 */
- index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
+ denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
- index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
+ denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
/* 4. interrupt when complete, burst len = 64 bytes */
- index_addr(denali, mode | 0x14000, 0x2400);
+ denali_host_write(denali, mode | 0x14000, 0x2400);
}
-static void denali_setup_dma(struct denali_nand_info *denali, int op)
+static void denali_setup_dma(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
if (denali->caps & DENALI_CAP_DMA_64BIT)
- denali_setup_dma64(denali, op);
+ denali_setup_dma64(denali, dma_addr, page, write);
else
- denali_setup_dma32(denali, op);
+ denali_setup_dma32(denali, dma_addr, page, write);
}
-/*
- * writes a page. user specifies type, and this function handles the
- * configuration details.
- */
-static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, bool raw_xfer)
+static int denali_pio_read(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
+ uint32_t addr = DENALI_BANK(denali) | page;
+ uint32_t *buf32 = (uint32_t *)buf;
+ uint32_t irq_status, ecc_err_mask;
+ int i;
+
+ if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ else
+ ecc_err_mask = INTR__ECC_ERR;
+
+ denali_reset_irq(denali);
+
+ iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
+ for (i = 0; i < size / 4; i++)
+ *buf32++ = ioread32(denali->host + DENALI_HOST_DATA);
+
+ irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
+ if (!(irq_status & INTR__PAGE_XFER_INC))
+ return -EIO;
+
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
+
+ return irq_status & ecc_err_mask ? -EBADMSG : 0;
+}
+
+static int denali_pio_write(struct denali_nand_info *denali,
+ const void *buf, size_t size, int page, int raw)
+{
+ uint32_t addr = DENALI_BANK(denali) | page;
+ const uint32_t *buf32 = (uint32_t *)buf;
uint32_t irq_status;
- uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ int i;
- /*
- * if it is a raw xfer, we want to disable ecc and send the spare area.
- * !raw_xfer - enable ecc
- * raw_xfer - transfer spare
- */
- setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer);
+ denali_reset_irq(denali);
- /* copy buffer into DMA buffer */
- memcpy(denali->buf.buf, buf, mtd->writesize);
+ iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
+ for (i = 0; i < size / 4; i++)
+ iowrite32(*buf32++, denali->host + DENALI_HOST_DATA);
- if (raw_xfer) {
- /* transfer the data to the spare area */
- memcpy(denali->buf.buf + mtd->writesize,
- chip->oob_poi,
- mtd->oobsize);
+ irq_status = denali_wait_for_irq(denali,
+ INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
+ if (!(irq_status & INTR__PROGRAM_COMP))
+ return -EIO;
+
+ return 0;
+}
+
+static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
+{
+ if (write)
+ return denali_pio_write(denali, buf, size, page, raw);
+ else
+ return denali_pio_read(denali, buf, size, page, raw);
+}
+
+static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
+{
+ dma_addr_t dma_addr;
+ uint32_t irq_mask, irq_status, ecc_err_mask;
+ enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+ int ret = 0;
+
+ dma_addr = dma_map_single(denali->dev, buf, size, dir);
+ if (dma_mapping_error(denali->dev, dma_addr)) {
+ dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n");
+ return denali_pio_xfer(denali, buf, size, page, raw, write);
}
- dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);
+ if (write) {
+ /*
+ * INTR__PROGRAM_COMP is never asserted for the DMA transfer.
+ * We can use INTR__DMA_CMD_COMP instead. This flag is asserted
+ * when the page program is completed.
+ */
+ irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ ecc_err_mask = 0;
+ } else if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ } else {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_ERR;
+ }
- clear_interrupts(denali);
denali_enable_dma(denali, true);
- denali_setup_dma(denali, DENALI_WRITE);
+ denali_reset_irq(denali);
+ denali_setup_dma(denali, dma_addr, page, write);
/* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
-
- if (irq_status == 0) {
- dev_err(denali->dev, "timeout on write_page (type = %d)\n",
- raw_xfer);
- denali->status = NAND_STATUS_FAIL;
- }
+ irq_status = denali_wait_for_irq(denali, irq_mask);
+ if (!(irq_status & INTR__DMA_CMD_COMP))
+ ret = -EIO;
+ else if (irq_status & ecc_err_mask)
+ ret = -EBADMSG;
denali_enable_dma(denali, false);
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
+ dma_unmap_single(denali->dev, dma_addr, size, dir);
- return 0;
-}
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
-/* NAND core entry points */
+ return ret;
+}
-/*
- * this is the callback that the NAND core calls to write a page. Since
- * writing a page with ECC or without is similar, all the work is done
- * by write_page above.
- */
-static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page)
+static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
{
- /*
- * for regular page writes, we let HW handle all the ECC
- * data written to the device.
- */
- return write_page(mtd, chip, buf, false);
+ setup_ecc_for_xfer(denali, !raw, raw);
+
+ if (denali->dma_avail)
+ return denali_dma_xfer(denali, buf, size, page, raw, write);
+ else
+ return denali_pio_xfer(denali, buf, size, page, raw, write);
}
-/*
- * This is the callback that the NAND core calls to write a page without ECC.
- * raw access is similar to ECC page writes, so all the work is done in the
- * write_page() function above.
- */
-static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required,
- int page)
+static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int write)
{
- /*
- * for raw page writes, we want to disable ECC and simply write
- * whatever data is in the buffer.
- */
- return write_page(mtd, chip, buf, true);
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ unsigned int start_cmd = write ? NAND_CMD_SEQIN : NAND_CMD_READ0;
+ unsigned int rnd_cmd = write ? NAND_CMD_RNDIN : NAND_CMD_RNDOUT;
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ uint8_t *bufpoi = chip->oob_poi;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int i, pos, len;
+
+ /* BBM at the beginning of the OOB area */
+ chip->cmdfunc(mtd, start_cmd, writesize, page);
+ if (write)
+ chip->write_buf(mtd, bufpoi, oob_skip);
+ else
+ chip->read_buf(mtd, bufpoi, oob_skip);
+ bufpoi += oob_skip;
+
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ chip->cmdfunc(mtd, rnd_cmd, pos, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ chip->cmdfunc(mtd, rnd_cmd, writesize + oob_skip, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ }
+ }
+
+ /* OOB free */
+ len = oobsize - (bufpoi - chip->oob_poi);
+ chip->cmdfunc(mtd, rnd_cmd, size - len, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
}
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
+static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
- return write_oob_data(mtd, chip->oob_poi, page);
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ void *dma_buf = denali->buf;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int ret, i, pos, len;
+
+ ret = denali_data_xfer(denali, dma_buf, size, page, 1, 0);
+ if (ret)
+ return ret;
+
+ /* Arrange the buffer for syndrome payload/ecc layout */
+ if (buf) {
+ for (i = 0; i < ecc_steps; i++) {
+ pos = i * (ecc_size + ecc_bytes);
+ len = ecc_size;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(buf, dma_buf + pos, len);
+ buf += len;
+ if (len < ecc_size) {
+ len = ecc_size - len;
+ memcpy(buf, dma_buf + writesize + oob_skip,
+ len);
+ buf += len;
+ }
+ }
+ }
+
+ if (oob_required) {
+ uint8_t *oob = chip->oob_poi;
+
+ /* BBM at the beginning of the OOB area */
+ memcpy(oob, dma_buf + writesize, oob_skip);
+ oob += oob_skip;
+
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(oob, dma_buf + pos, len);
+ oob += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ memcpy(oob, dma_buf + writesize + oob_skip,
+ len);
+ oob += len;
+ }
+ }
+
+ /* OOB free */
+ len = oobsize - (oob - chip->oob_poi);
+ memcpy(oob, dma_buf + size - len, len);
+ }
+
+ return 0;
}
static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- read_oob_data(mtd, chip->oob_poi, page);
+ denali_oob_xfer(mtd, chip, page, 0);
return 0;
}
-static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
- uint32_t irq_status;
- uint32_t irq_mask = denali->caps & DENALI_CAP_HW_ECC_FIXUP ?
- INTR__DMA_CMD_COMP | INTR__ECC_UNCOR_ERR :
- INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR;
- unsigned long uncor_ecc_flags = 0;
- int stat = 0;
+ int status;
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
- }
+ denali_reset_irq(denali);
- setup_ecc_for_xfer(denali, true, false);
+ denali_oob_xfer(mtd, chip, page, 1);
- denali_enable_dma(denali, true);
- dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
- clear_interrupts(denali);
- denali_setup_dma(denali, DENALI_READ);
-
- /* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
+static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ unsigned long uncor_ecc_flags = 0;
+ int stat = 0;
+ int ret;
- memcpy(buf, denali->buf.buf, mtd->writesize);
+ ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0);
+ if (ret && ret != -EBADMSG)
+ return ret;
if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags);
- else if (irq_status & INTR__ECC_ERR)
+ else if (ret == -EBADMSG)
stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf);
- denali_enable_dma(denali, false);
if (stat < 0)
return stat;
if (uncor_ecc_flags) {
- read_oob_data(mtd, chip->oob_poi, denali->page);
+ ret = denali_read_oob(mtd, chip, page);
+ if (ret)
+ return ret;
stat = denali_check_erased_page(mtd, chip, buf,
uncor_ecc_flags, stat);
@@ -1181,137 +858,266 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
return stat;
}
-static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
+static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
- uint32_t irq_mask = INTR__DMA_CMD_COMP;
-
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
- }
-
- setup_ecc_for_xfer(denali, false, true);
- denali_enable_dma(denali, true);
-
- dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
-
- clear_interrupts(denali);
- denali_setup_dma(denali, DENALI_READ);
-
- /* wait for operation to complete */
- wait_for_irq(denali, irq_mask);
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ void *dma_buf = denali->buf;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int i, pos, len;
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
+ /*
+ * Fill the buffer with 0xff first except the full page transfer.
+ * This simplifies the logic.
+ */
+ if (!buf || !oob_required)
+ memset(dma_buf, 0xff, size);
+
+ /* Arrange the buffer for syndrome payload/ecc layout */
+ if (buf) {
+ for (i = 0; i < ecc_steps; i++) {
+ pos = i * (ecc_size + ecc_bytes);
+ len = ecc_size;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(dma_buf + pos, buf, len);
+ buf += len;
+ if (len < ecc_size) {
+ len = ecc_size - len;
+ memcpy(dma_buf + writesize + oob_skip, buf,
+ len);
+ buf += len;
+ }
+ }
+ }
- denali_enable_dma(denali, false);
+ if (oob_required) {
+ const uint8_t *oob = chip->oob_poi;
+
+ /* BBM at the beginning of the OOB area */
+ memcpy(dma_buf + writesize, oob, oob_skip);
+ oob += oob_skip;
+
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(dma_buf + pos, oob, len);
+ oob += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ memcpy(dma_buf + writesize + oob_skip, oob,
+ len);
+ oob += len;
+ }
+ }
- memcpy(buf, denali->buf.buf, mtd->writesize);
- memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize);
+ /* OOB free */
+ len = oobsize - (oob - chip->oob_poi);
+ memcpy(dma_buf + size - len, oob, len);
+ }
- return 0;
+ return denali_data_xfer(denali, dma_buf, size, page, 1, 1);
}
-static uint8_t denali_read_byte(struct mtd_info *mtd)
+static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint8_t result = 0xff;
-
- if (denali->buf.head < denali->buf.tail)
- result = denali->buf.buf[denali->buf.head++];
- return result;
+ return denali_data_xfer(denali, (void *)buf, mtd->writesize,
+ page, 0, 1);
}
static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- spin_lock_irq(&denali->irq_lock);
- denali->flash_bank = chip;
- spin_unlock_irq(&denali->irq_lock);
+ denali->active_bank = chip;
}
static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- int status = denali->status;
+ uint32_t irq_status;
- denali->status = 0;
+ /* R/B# pin transitioned from low to high? */
+ irq_status = denali_wait_for_irq(denali, INTR__INT_ACT);
- return status;
+ return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
}
static int denali_erase(struct mtd_info *mtd, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_status;
- uint32_t cmd, irq_status;
-
- clear_interrupts(denali);
+ denali_reset_irq(denali);
- /* setup page read request for access type */
- cmd = MODE_10 | BANK(denali->flash_bank) | page;
- index_addr(denali, cmd, 0x1);
+ denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
+ DENALI_ERASE);
/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL);
+ irq_status = denali_wait_for_irq(denali,
+ INTR__ERASE_COMP | INTR__ERASE_FAIL);
- return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
+ return irq_status & INTR__ERASE_COMP ? 0 : NAND_STATUS_FAIL;
}
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
- int page)
+#define DIV_ROUND_DOWN_ULL(ll, d) \
+ ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; })
+
+static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t addr, id;
+ const struct nand_sdr_timings *timings;
+ unsigned long t_clk;
+ int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
+ int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
+ int addr_2_data_mask;
+ uint32_t tmp;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ /* clk_x period in picoseconds */
+ t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate);
+ if (!t_clk)
+ return -EINVAL;
+
+ if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ /* tREA -> ACC_CLKS */
+ acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk);
+ acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
+
+ tmp = ioread32(denali->reg + ACC_CLKS);
+ tmp &= ~ACC_CLKS__VALUE;
+ tmp |= acc_clks;
+ iowrite32(tmp, denali->reg + ACC_CLKS);
+
+ /* tRWH -> RE_2_WE */
+ re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk);
+ re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_WE);
+ tmp &= ~RE_2_WE__VALUE;
+ tmp |= re_2_we;
+ iowrite32(tmp, denali->reg + RE_2_WE);
+
+ /* tRHZ -> RE_2_RE */
+ re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk);
+ re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_RE);
+ tmp &= ~RE_2_RE__VALUE;
+ tmp |= re_2_re;
+ iowrite32(tmp, denali->reg + RE_2_RE);
+
+ /* tWHR -> WE_2_RE */
+ we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk);
+ we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
+
+ tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
+ tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
+ tmp |= we_2_re;
+ iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
+
+ /* tADL -> ADDR_2_DATA */
+
+ /* for older versions, ADDR_2_DATA is only 6 bit wide */
+ addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+ if (denali->revision < 0x0501)
+ addr_2_data_mask >>= 1;
+
+ addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk);
+ addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
+
+ tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
+ tmp &= ~addr_2_data_mask;
+ tmp |= addr_2_data;
+ iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
+
+ /* tREH, tWH -> RDWR_EN_HI_CNT */
+ rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
+ t_clk);
+ rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
+ tmp &= ~RDWR_EN_HI_CNT__VALUE;
+ tmp |= rdwr_en_hi;
+ iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
+
+ /* tRP, tWP -> RDWR_EN_LO_CNT */
+ rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min),
+ t_clk);
+ rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min),
+ t_clk);
+ rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT);
+ rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi);
+ rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
+ tmp &= ~RDWR_EN_LO_CNT__VALUE;
+ tmp |= rdwr_en_lo;
+ iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
+
+ /* tCS, tCEA -> CS_SETUP_CNT */
+ cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo,
+ (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks,
+ 0);
+ cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + CS_SETUP_CNT);
+ tmp &= ~CS_SETUP_CNT__VALUE;
+ tmp |= cs_setup;
+ iowrite32(tmp, denali->reg + CS_SETUP_CNT);
+
+ return 0;
+}
+
+static void denali_reset_banks(struct denali_nand_info *denali)
+{
+ u32 irq_status;
int i;
- switch (cmd) {
- case NAND_CMD_PAGEPROG:
- break;
- case NAND_CMD_STATUS:
- read_status(denali);
- break;
- case NAND_CMD_READID:
- case NAND_CMD_PARAM:
- reset_buf(denali);
- /*
- * sometimes ManufactureId read from register is not right
- * e.g. some of Micron MT29F32G08QAA MLC NAND chips
- * So here we send READID cmd to NAND insteand
- */
- addr = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, addr | 0, 0x90);
- index_addr(denali, addr | 1, col);
- for (i = 0; i < 8; i++) {
- index_addr_read_data(denali, addr | 2, &id);
- write_byte_to_buf(denali, id);
- }
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_SEQIN:
- denali->page = page;
- break;
- case NAND_CMD_RESET:
- reset_bank(denali);
- break;
- case NAND_CMD_READOOB:
- /* TODO: Read OOB data */
- break;
- default:
- pr_err(": unsupported command received 0x%x\n", cmd);
- break;
+ for (i = 0; i < denali->max_banks; i++) {
+ denali->active_bank = i;
+
+ denali_reset_irq(denali);
+
+ iowrite32(DEVICE_RESET__BANK(i),
+ denali->reg + DEVICE_RESET);
+
+ irq_status = denali_wait_for_irq(denali,
+ INTR__RST_COMP | INTR__INT_ACT | INTR__TIME_OUT);
+ if (!(irq_status & INTR__INT_ACT))
+ break;
}
+
+ dev_dbg(denali->dev, "%d chips connected\n", i);
+ denali->max_banks = i;
}
-/* end NAND core entry points */
-/* Initialization code to bring the device up to a known good state */
static void denali_hw_init(struct denali_nand_info *denali)
{
/*
@@ -1319,8 +1125,7 @@ static void denali_hw_init(struct denali_nand_info *denali)
* override it.
*/
if (!denali->revision)
- denali->revision =
- swab16(ioread32(denali->flash_reg + REVISION));
+ denali->revision = swab16(ioread32(denali->reg + REVISION));
/*
* tell driver how many bit controller will skip before
@@ -1328,30 +1133,51 @@ static void denali_hw_init(struct denali_nand_info *denali)
* set by firmware. So we read this value out.
* if this value is 0, just let it be.
*/
- denali->bbtskipbytes = ioread32(denali->flash_reg +
- SPARE_AREA_SKIP_BYTES);
+ denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
detect_max_banks(denali);
- denali_nand_reset(denali);
- iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
- iowrite32(CHIP_EN_DONT_CARE__FLAG,
- denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+ iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
- iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+ iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
/* Should set value for these registers when init */
- iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
- iowrite32(1, denali->flash_reg + ECC_ENABLE);
- denali_nand_timing_set(denali);
- denali_irq_init(denali);
+ iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(1, denali->reg + ECC_ENABLE);
}
-/*
- * Althogh controller spec said SLC ECC is forceb to be 4bit,
- * but denali controller in MRST only support 15bit and 8bit ECC
- * correction
- */
-#define ECC_8BITS 14
-#define ECC_15BITS 26
+int denali_calc_ecc_bytes(int step_size, int strength)
+{
+ /* BCH code. Denali requires ecc.bytes to be multiple of 2 */
+ return DIV_ROUND_UP(strength * fls(step_size * 8), 16) * 2;
+}
+EXPORT_SYMBOL(denali_calc_ecc_bytes);
+
+static int denali_ecc_setup(struct mtd_info *mtd, struct nand_chip *chip,
+ struct denali_nand_info *denali)
+{
+ int oobavail = mtd->oobsize - denali->oob_skip_bytes;
+ int ret;
+
+ /*
+ * If .size and .strength are already set (usually by DT),
+ * check if they are supported by this controller.
+ */
+ if (chip->ecc.size && chip->ecc.strength)
+ return nand_check_ecc_caps(chip, denali->ecc_caps, oobavail);
+
+ /*
+ * We want .size and .strength closest to the chip's requirement
+ * unless NAND_ECC_MAXIMIZE is requested.
+ */
+ if (!(chip->ecc.options & NAND_ECC_MAXIMIZE)) {
+ ret = nand_match_ecc_req(chip, denali->ecc_caps, oobavail);
+ if (!ret)
+ return 0;
+ }
+
+ /* Max ECC strength is the last thing we can do */
+ return nand_maximize_ecc(chip, denali->ecc_caps, oobavail);
+}
static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
@@ -1362,7 +1188,7 @@ static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
if (section)
return -ERANGE;
- oobregion->offset = denali->bbtskipbytes;
+ oobregion->offset = denali->oob_skip_bytes;
oobregion->length = chip->ecc.total;
return 0;
@@ -1377,7 +1203,7 @@ static int denali_ooblayout_free(struct mtd_info *mtd, int section,
if (section)
return -ERANGE;
- oobregion->offset = chip->ecc.total + denali->bbtskipbytes;
+ oobregion->offset = chip->ecc.total + denali->oob_skip_bytes;
oobregion->length = mtd->oobsize - oobregion->offset;
return 0;
@@ -1388,29 +1214,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
.free = denali_ooblayout_free,
};
-static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
-static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr bbt_main_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 8,
- .len = 4,
- .veroffs = 12,
- .maxblocks = 4,
- .pattern = bbt_pattern,
-};
-
-static struct nand_bbt_descr bbt_mirror_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 8,
- .len = 4,
- .veroffs = 12,
- .maxblocks = 4,
- .pattern = mirror_pattern,
-};
-
/* initialize driver data structures */
static void denali_drv_init(struct denali_nand_info *denali)
{
@@ -1425,12 +1228,6 @@ static void denali_drv_init(struct denali_nand_info *denali)
* element that might be access shared data (interrupt status)
*/
spin_lock_init(&denali->irq_lock);
-
- /* indicate that MTD has not selected a valid bank yet */
- denali->flash_bank = CHIP_SELECT_INVALID;
-
- /* initialize our irq_status variable to indicate no interrupts */
- denali->irq_status = 0;
}
static int denali_multidev_fixup(struct denali_nand_info *denali)
@@ -1445,23 +1242,23 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
* In this case, the core framework knows nothing about this fact,
* so we should tell it the _logical_ pagesize and anything necessary.
*/
- denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->devs_per_cs = ioread32(denali->reg + DEVICES_CONNECTED);
/*
* On some SoCs, DEVICES_CONNECTED is not auto-detected.
* For those, DEVICES_CONNECTED is left to 0. Set 1 if it is the case.
*/
- if (denali->devnum == 0) {
- denali->devnum = 1;
- iowrite32(1, denali->flash_reg + DEVICES_CONNECTED);
+ if (denali->devs_per_cs == 0) {
+ denali->devs_per_cs = 1;
+ iowrite32(1, denali->reg + DEVICES_CONNECTED);
}
- if (denali->devnum == 1)
+ if (denali->devs_per_cs == 1)
return 0;
- if (denali->devnum != 2) {
+ if (denali->devs_per_cs != 2) {
dev_err(denali->dev, "unsupported number of devices %d\n",
- denali->devnum);
+ denali->devs_per_cs);
return -EINVAL;
}
@@ -1479,7 +1276,7 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
chip->ecc.size <<= 1;
chip->ecc.bytes <<= 1;
chip->ecc.strength <<= 1;
- denali->bbtskipbytes <<= 1;
+ denali->oob_skip_bytes <<= 1;
return 0;
}
@@ -1490,27 +1287,12 @@ int denali_init(struct denali_nand_info *denali)
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- if (denali->platform == INTEL_CE4100) {
- /*
- * Due to a silicon limitation, we can only support
- * ONFI timing mode 1 and below.
- */
- if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
- return -EINVAL;
- }
- }
-
- /* allocate a temporary buffer for nand_scan_ident() */
- denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE,
- GFP_DMA | GFP_KERNEL);
- if (!denali->buf.buf)
- return -ENOMEM;
-
mtd->dev.parent = denali->dev;
denali_hw_init(denali);
denali_drv_init(denali);
+ denali_clear_irq_all(denali);
+
/* Request IRQ after all the hardware initialization is finished */
ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
IRQF_SHARED, DENALI_NAND_NAME, denali);
@@ -1519,8 +1301,11 @@ int denali_init(struct denali_nand_info *denali)
return ret;
}
- /* now that our ISR is registered, we can enable interrupts */
- denali_set_intr_modes(denali, true);
+ denali_enable_irq(denali);
+ denali_reset_banks(denali);
+
+ denali->active_bank = DENALI_INVALID_BANK;
+
nand_set_flash_node(chip, denali->dev->of_node);
/* Fallback to the default name if DT did not give "label" property */
if (!mtd->name)
@@ -1528,10 +1313,17 @@ int denali_init(struct denali_nand_info *denali)
/* register the driver with the NAND core subsystem */
chip->select_chip = denali_select_chip;
- chip->cmdfunc = denali_cmdfunc;
chip->read_byte = denali_read_byte;
+ chip->write_byte = denali_write_byte;
+ chip->read_word = denali_read_word;
+ chip->cmd_ctrl = denali_cmd_ctrl;
+ chip->dev_ready = denali_dev_ready;
chip->waitfunc = denali_waitfunc;
+ /* clk rate info is needed for setup_data_interface */
+ if (denali->clk_x_rate)
+ chip->setup_data_interface = denali_setup_data_interface;
+
/*
* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
@@ -1539,33 +1331,25 @@ int denali_init(struct denali_nand_info *denali)
*/
ret = nand_scan_ident(mtd, denali->max_banks, NULL);
if (ret)
- goto failed_req_irq;
-
- /* allocate the right size buffer now */
- devm_kfree(denali->dev, denali->buf.buf);
- denali->buf.buf = devm_kzalloc(denali->dev,
- mtd->writesize + mtd->oobsize,
- GFP_KERNEL);
- if (!denali->buf.buf) {
- ret = -ENOMEM;
- goto failed_req_irq;
- }
+ goto disable_irq;
- ret = dma_set_mask(denali->dev,
- DMA_BIT_MASK(denali->caps & DENALI_CAP_DMA_64BIT ?
- 64 : 32));
- if (ret) {
- dev_err(denali->dev, "No usable DMA configuration\n");
- goto failed_req_irq;
+ if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
+ denali->dma_avail = 1;
+
+ if (denali->dma_avail) {
+ int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
+
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
+ if (ret) {
+ dev_info(denali->dev,
+ "Failed to set DMA mask. Disabling DMA.\n");
+ denali->dma_avail = 0;
+ }
}
- denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
- mtd->writesize + mtd->oobsize,
- DMA_BIDIRECTIONAL);
- if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
- dev_err(denali->dev, "Failed to map DMA buffer\n");
- ret = -EIO;
- goto failed_req_irq;
+ if (denali->dma_avail) {
+ chip->options |= NAND_USE_BOUNCE_BUFFER;
+ chip->buf_align = 16;
}
/*
@@ -1574,46 +1358,49 @@ int denali_init(struct denali_nand_info *denali)
* bad block management.
*/
- /* Bad block management */
- chip->bbt_td = &bbt_main_descr;
- chip->bbt_md = &bbt_mirror_descr;
-
- /* skip the scan for now until we have OOB read and write support */
chip->bbt_options |= NAND_BBT_USE_FLASH;
- chip->options |= NAND_SKIP_BBTSCAN;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
/* no subpage writes on denali */
chip->options |= NAND_NO_SUBPAGE_WRITE;
- /*
- * Denali Controller only support 15bit and 8bit ECC in MRST,
- * so just let controller do 15bit ECC for MLC and 8bit ECC for
- * SLC if possible.
- * */
- if (!nand_is_slc(chip) &&
- (mtd->oobsize > (denali->bbtskipbytes +
- ECC_15BITS * (mtd->writesize /
- ECC_SECTOR_SIZE)))) {
- /* if MLC OOB size is large enough, use 15bit ECC*/
- chip->ecc.strength = 15;
- chip->ecc.bytes = ECC_15BITS;
- iowrite32(15, denali->flash_reg + ECC_CORRECTION);
- } else if (mtd->oobsize < (denali->bbtskipbytes +
- ECC_8BITS * (mtd->writesize /
- ECC_SECTOR_SIZE))) {
- pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes");
- goto failed_req_irq;
- } else {
- chip->ecc.strength = 8;
- chip->ecc.bytes = ECC_8BITS;
- iowrite32(8, denali->flash_reg + ECC_CORRECTION);
+ ret = denali_ecc_setup(mtd, chip, denali);
+ if (ret) {
+ dev_err(denali->dev, "Failed to setup ECC settings.\n");
+ goto disable_irq;
}
+ dev_dbg(denali->dev,
+ "chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
+ chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
+
+ iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1),
+ denali->reg + ECC_CORRECTION);
+ iowrite32(mtd->erasesize / mtd->writesize,
+ denali->reg + PAGES_PER_BLOCK);
+ iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
+ denali->reg + DEVICE_WIDTH);
+ iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+
+ iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
+ /* chip->ecc.steps is set by nand_scan_tail(); not available here */
+ iowrite32(mtd->writesize / chip->ecc.size,
+ denali->reg + CFG_NUM_DATA_BLOCKS);
+
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
- /* override the default read operations */
- chip->ecc.size = ECC_SECTOR_SIZE;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->read_buf = denali_read_buf16;
+ chip->write_buf = denali_write_buf16;
+ } else {
+ chip->read_buf = denali_read_buf;
+ chip->write_buf = denali_write_buf;
+ }
+ chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS;
chip->ecc.read_page = denali_read_page;
chip->ecc.read_page_raw = denali_read_page_raw;
chip->ecc.write_page = denali_write_page;
@@ -1624,21 +1411,34 @@ int denali_init(struct denali_nand_info *denali)
ret = denali_multidev_fixup(denali);
if (ret)
- goto failed_req_irq;
+ goto disable_irq;
+
+ /*
+ * This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not
+ * use devm_kmalloc() because the memory allocated by devm_ does not
+ * guarantee DMA-safe alignment.
+ */
+ denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ if (!denali->buf) {
+ ret = -ENOMEM;
+ goto disable_irq;
+ }
ret = nand_scan_tail(mtd);
if (ret)
- goto failed_req_irq;
+ goto free_buf;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
- goto failed_req_irq;
+ goto free_buf;
}
return 0;
-failed_req_irq:
- denali_irq_cleanup(denali->irq, denali);
+free_buf:
+ kfree(denali->buf);
+disable_irq:
+ denali_disable_irq(denali);
return ret;
}
@@ -1648,16 +1448,9 @@ EXPORT_SYMBOL(denali_init);
void denali_remove(struct denali_nand_info *denali)
{
struct mtd_info *mtd = nand_to_mtd(&denali->nand);
- /*
- * Pre-compute DMA buffer size to avoid any problems in case
- * nand_release() ever changes in a way that mtd->writesize and
- * mtd->oobsize are not reliable after this call.
- */
- int bufsize = mtd->writesize + mtd->oobsize;
nand_release(mtd);
- denali_irq_cleanup(denali->irq, denali);
- dma_unmap_single(denali->dev, denali->buf.dma_buf, bufsize,
- DMA_BIDIRECTIONAL);
+ kfree(denali->buf);
+ denali_disable_irq(denali);
}
EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index ec004850652a..237cc706b0fb 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -24,330 +24,315 @@
#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
-#define DEVICE_RESET__BANK0 0x0001
-#define DEVICE_RESET__BANK1 0x0002
-#define DEVICE_RESET__BANK2 0x0004
-#define DEVICE_RESET__BANK3 0x0008
+#define DEVICE_RESET__BANK(bank) BIT(bank)
#define TRANSFER_SPARE_REG 0x10
-#define TRANSFER_SPARE_REG__FLAG 0x0001
+#define TRANSFER_SPARE_REG__FLAG BIT(0)
#define LOAD_WAIT_CNT 0x20
-#define LOAD_WAIT_CNT__VALUE 0xffff
+#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0)
#define PROGRAM_WAIT_CNT 0x30
-#define PROGRAM_WAIT_CNT__VALUE 0xffff
+#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0)
#define ERASE_WAIT_CNT 0x40
-#define ERASE_WAIT_CNT__VALUE 0xffff
+#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0)
#define INT_MON_CYCCNT 0x50
-#define INT_MON_CYCCNT__VALUE 0xffff
+#define INT_MON_CYCCNT__VALUE GENMASK(15, 0)
#define RB_PIN_ENABLED 0x60
-#define RB_PIN_ENABLED__BANK0 0x0001
-#define RB_PIN_ENABLED__BANK1 0x0002
-#define RB_PIN_ENABLED__BANK2 0x0004
-#define RB_PIN_ENABLED__BANK3 0x0008
+#define RB_PIN_ENABLED__BANK(bank) BIT(bank)
#define MULTIPLANE_OPERATION 0x70
-#define MULTIPLANE_OPERATION__FLAG 0x0001
+#define MULTIPLANE_OPERATION__FLAG BIT(0)
#define MULTIPLANE_READ_ENABLE 0x80
-#define MULTIPLANE_READ_ENABLE__FLAG 0x0001
+#define MULTIPLANE_READ_ENABLE__FLAG BIT(0)
#define COPYBACK_DISABLE 0x90
-#define COPYBACK_DISABLE__FLAG 0x0001
+#define COPYBACK_DISABLE__FLAG BIT(0)
#define CACHE_WRITE_ENABLE 0xa0
-#define CACHE_WRITE_ENABLE__FLAG 0x0001
+#define CACHE_WRITE_ENABLE__FLAG BIT(0)
#define CACHE_READ_ENABLE 0xb0
-#define CACHE_READ_ENABLE__FLAG 0x0001
+#define CACHE_READ_ENABLE__FLAG BIT(0)
#define PREFETCH_MODE 0xc0
-#define PREFETCH_MODE__PREFETCH_EN 0x0001
-#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0
+#define PREFETCH_MODE__PREFETCH_EN BIT(0)
+#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4)
#define CHIP_ENABLE_DONT_CARE 0xd0
-#define CHIP_EN_DONT_CARE__FLAG 0x01
+#define CHIP_EN_DONT_CARE__FLAG BIT(0)
#define ECC_ENABLE 0xe0
-#define ECC_ENABLE__FLAG 0x0001
+#define ECC_ENABLE__FLAG BIT(0)
#define GLOBAL_INT_ENABLE 0xf0
-#define GLOBAL_INT_EN_FLAG 0x01
+#define GLOBAL_INT_EN_FLAG BIT(0)
-#define WE_2_RE 0x100
-#define WE_2_RE__VALUE 0x003f
+#define TWHR2_AND_WE_2_RE 0x100
+#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0)
+#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8)
-#define ADDR_2_DATA 0x110
-#define ADDR_2_DATA__VALUE 0x003f
+#define TCWAW_AND_ADDR_2_DATA 0x110
+/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */
+#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0)
+#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8)
#define RE_2_WE 0x120
-#define RE_2_WE__VALUE 0x003f
+#define RE_2_WE__VALUE GENMASK(5, 0)
#define ACC_CLKS 0x130
-#define ACC_CLKS__VALUE 0x000f
+#define ACC_CLKS__VALUE GENMASK(3, 0)
#define NUMBER_OF_PLANES 0x140
-#define NUMBER_OF_PLANES__VALUE 0x0007
+#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0)
#define PAGES_PER_BLOCK 0x150
-#define PAGES_PER_BLOCK__VALUE 0xffff
+#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0)
#define DEVICE_WIDTH 0x160
-#define DEVICE_WIDTH__VALUE 0x0003
+#define DEVICE_WIDTH__VALUE GENMASK(1, 0)
#define DEVICE_MAIN_AREA_SIZE 0x170
-#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff
+#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0)
#define DEVICE_SPARE_AREA_SIZE 0x180
-#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff
+#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0)
#define TWO_ROW_ADDR_CYCLES 0x190
-#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001
+#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0)
#define MULTIPLANE_ADDR_RESTRICT 0x1a0
-#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001
+#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0)
#define ECC_CORRECTION 0x1b0
-#define ECC_CORRECTION__VALUE 0x001f
+#define ECC_CORRECTION__VALUE GENMASK(4, 0)
+#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
+#define MAKE_ECC_CORRECTION(val, thresh) \
+ (((val) & (ECC_CORRECTION__VALUE)) | \
+ (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD)))
#define READ_MODE 0x1c0
-#define READ_MODE__VALUE 0x000f
+#define READ_MODE__VALUE GENMASK(3, 0)
#define WRITE_MODE 0x1d0
-#define WRITE_MODE__VALUE 0x000f
+#define WRITE_MODE__VALUE GENMASK(3, 0)
#define COPYBACK_MODE 0x1e0
-#define COPYBACK_MODE__VALUE 0x000f
+#define COPYBACK_MODE__VALUE GENMASK(3, 0)
#define RDWR_EN_LO_CNT 0x1f0
-#define RDWR_EN_LO_CNT__VALUE 0x001f
+#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0)
#define RDWR_EN_HI_CNT 0x200
-#define RDWR_EN_HI_CNT__VALUE 0x001f
+#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0)
#define MAX_RD_DELAY 0x210
-#define MAX_RD_DELAY__VALUE 0x000f
+#define MAX_RD_DELAY__VALUE GENMASK(3, 0)
#define CS_SETUP_CNT 0x220
-#define CS_SETUP_CNT__VALUE 0x001f
+#define CS_SETUP_CNT__VALUE GENMASK(4, 0)
+#define CS_SETUP_CNT__TWB GENMASK(17, 12)
#define SPARE_AREA_SKIP_BYTES 0x230
-#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f
+#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0)
#define SPARE_AREA_MARKER 0x240
-#define SPARE_AREA_MARKER__VALUE 0xffff
+#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0)
#define DEVICES_CONNECTED 0x250
-#define DEVICES_CONNECTED__VALUE 0x0007
+#define DEVICES_CONNECTED__VALUE GENMASK(2, 0)
#define DIE_MASK 0x260
-#define DIE_MASK__VALUE 0x00ff
+#define DIE_MASK__VALUE GENMASK(7, 0)
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
-#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff
+#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0)
#define WRITE_PROTECT 0x280
-#define WRITE_PROTECT__FLAG 0x0001
+#define WRITE_PROTECT__FLAG BIT(0)
#define RE_2_RE 0x290
-#define RE_2_RE__VALUE 0x003f
+#define RE_2_RE__VALUE GENMASK(5, 0)
#define MANUFACTURER_ID 0x300
-#define MANUFACTURER_ID__VALUE 0x00ff
+#define MANUFACTURER_ID__VALUE GENMASK(7, 0)
#define DEVICE_ID 0x310
-#define DEVICE_ID__VALUE 0x00ff
+#define DEVICE_ID__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_0 0x320
-#define DEVICE_PARAM_0__VALUE 0x00ff
+#define DEVICE_PARAM_0__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_1 0x330
-#define DEVICE_PARAM_1__VALUE 0x00ff
+#define DEVICE_PARAM_1__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_2 0x340
-#define DEVICE_PARAM_2__VALUE 0x00ff
+#define DEVICE_PARAM_2__VALUE GENMASK(7, 0)
#define LOGICAL_PAGE_DATA_SIZE 0x350
-#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff
+#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0)
#define LOGICAL_PAGE_SPARE_SIZE 0x360
-#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
+#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0)
#define REVISION 0x370
-#define REVISION__VALUE 0xffff
+#define REVISION__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_FEATURES 0x380
-#define ONFI_DEVICE_FEATURES__VALUE 0x003f
+#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0)
#define ONFI_OPTIONAL_COMMANDS 0x390
-#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
+#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0)
#define ONFI_TIMING_MODE 0x3a0
-#define ONFI_TIMING_MODE__VALUE 0x003f
+#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
-#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f
+#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
-#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff
-#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100
+#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0)
+#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
-#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
-#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff
-
-#define FEATURES 0x3f0
-#define FEATURES__N_BANKS 0x0003
-#define FEATURES__ECC_MAX_ERR 0x003c
-#define FEATURES__DMA 0x0040
-#define FEATURES__CMD_DMA 0x0080
-#define FEATURES__PARTITION 0x0100
-#define FEATURES__XDMA_SIDEBAND 0x0200
-#define FEATURES__GPREG 0x0400
-#define FEATURES__INDEX_ADDR 0x0800
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0)
+
+#define FEATURES 0x3f0
+#define FEATURES__N_BANKS GENMASK(1, 0)
+#define FEATURES__ECC_MAX_ERR GENMASK(5, 2)
+#define FEATURES__DMA BIT(6)
+#define FEATURES__CMD_DMA BIT(7)
+#define FEATURES__PARTITION BIT(8)
+#define FEATURES__XDMA_SIDEBAND BIT(9)
+#define FEATURES__GPREG BIT(10)
+#define FEATURES__INDEX_ADDR BIT(11)
#define TRANSFER_MODE 0x400
-#define TRANSFER_MODE__VALUE 0x0003
+#define TRANSFER_MODE__VALUE GENMASK(1, 0)
-#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50))
-#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50))
+#define INTR_STATUS(bank) (0x410 + (bank) * 0x50)
+#define INTR_EN(bank) (0x420 + (bank) * 0x50)
/* bit[1:0] is used differently depending on IP version */
-#define INTR__ECC_UNCOR_ERR 0x0001 /* new IP */
-#define INTR__ECC_TRANSACTION_DONE 0x0001 /* old IP */
-#define INTR__ECC_ERR 0x0002 /* old IP */
-#define INTR__DMA_CMD_COMP 0x0004
-#define INTR__TIME_OUT 0x0008
-#define INTR__PROGRAM_FAIL 0x0010
-#define INTR__ERASE_FAIL 0x0020
-#define INTR__LOAD_COMP 0x0040
-#define INTR__PROGRAM_COMP 0x0080
-#define INTR__ERASE_COMP 0x0100
-#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR__LOCKED_BLK 0x0400
-#define INTR__UNSUP_CMD 0x0800
-#define INTR__INT_ACT 0x1000
-#define INTR__RST_COMP 0x2000
-#define INTR__PIPE_CMD_ERR 0x4000
-#define INTR__PAGE_XFER_INC 0x8000
-
-#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50))
-#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
-#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50))
+#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */
+#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */
+#define INTR__ECC_ERR BIT(1) /* old IP */
+#define INTR__DMA_CMD_COMP BIT(2)
+#define INTR__TIME_OUT BIT(3)
+#define INTR__PROGRAM_FAIL BIT(4)
+#define INTR__ERASE_FAIL BIT(5)
+#define INTR__LOAD_COMP BIT(6)
+#define INTR__PROGRAM_COMP BIT(7)
+#define INTR__ERASE_COMP BIT(8)
+#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9)
+#define INTR__LOCKED_BLK BIT(10)
+#define INTR__UNSUP_CMD BIT(11)
+#define INTR__INT_ACT BIT(12)
+#define INTR__RST_COMP BIT(13)
+#define INTR__PIPE_CMD_ERR BIT(14)
+#define INTR__PAGE_XFER_INC BIT(15)
+#define INTR__ERASED_PAGE BIT(16)
+
+#define PAGE_CNT(bank) (0x430 + (bank) * 0x50)
+#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50)
+#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50)
#define ECC_THRESHOLD 0x600
-#define ECC_THRESHOLD__VALUE 0x03ff
+#define ECC_THRESHOLD__VALUE GENMASK(9, 0)
#define ECC_ERROR_BLOCK_ADDRESS 0x610
-#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
+#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0)
#define ECC_ERROR_PAGE_ADDRESS 0x620
-#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff
-#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000
+#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0)
+#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12)
#define ECC_ERROR_ADDRESS 0x630
-#define ECC_ERROR_ADDRESS__OFFSET 0x0fff
-#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000
+#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
+#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12)
#define ERR_CORRECTION_INFO 0x640
-#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff
-#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00
-#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000
-#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000
+#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0)
+#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8)
+#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14)
+#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15)
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
-#define ECC_COR_INFO__MAX_ERRORS 0x007f
-#define ECC_COR_INFO__UNCOR_ERR 0x0080
+#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0)
+#define ECC_COR_INFO__UNCOR_ERR BIT(7)
+
+#define CFG_DATA_BLOCK_SIZE 0x6b0
+
+#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0
+
+#define CFG_NUM_DATA_BLOCKS 0x6d0
+
+#define CFG_META_DATA_SIZE 0x6e0
#define DMA_ENABLE 0x700
-#define DMA_ENABLE__FLAG 0x0001
+#define DMA_ENABLE__FLAG BIT(0)
#define IGNORE_ECC_DONE 0x710
-#define IGNORE_ECC_DONE__FLAG 0x0001
+#define IGNORE_ECC_DONE__FLAG BIT(0)
#define DMA_INTR 0x720
#define DMA_INTR_EN 0x730
-#define DMA_INTR__TARGET_ERROR 0x0001
-#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
-#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
-#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
-#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
-#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
+#define DMA_INTR__TARGET_ERROR BIT(0)
+#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1)
+#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2)
+#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3)
+#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4)
+#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5)
#define TARGET_ERR_ADDR_LO 0x740
-#define TARGET_ERR_ADDR_LO__VALUE 0xffff
+#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0)
#define TARGET_ERR_ADDR_HI 0x750
-#define TARGET_ERR_ADDR_HI__VALUE 0xffff
+#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0)
#define CHNL_ACTIVE 0x760
-#define CHNL_ACTIVE__CHANNEL0 0x0001
-#define CHNL_ACTIVE__CHANNEL1 0x0002
-#define CHNL_ACTIVE__CHANNEL2 0x0004
-#define CHNL_ACTIVE__CHANNEL3 0x0008
-
-#define FAIL 1 /*failed flag*/
-#define PASS 0 /*success flag*/
-
-#define CLK_X 5
-#define CLK_MULTI 4
-
-#define ONFI_BLOOM_TIME 1
-#define MODE5_WORKAROUND 0
-
-
-#define MODE_00 0x00000000
-#define MODE_01 0x04000000
-#define MODE_10 0x08000000
-#define MODE_11 0x0C000000
-
-#define ECC_SECTOR_SIZE 512
-
-struct nand_buf {
- int head;
- int tail;
- uint8_t *buf;
- dma_addr_t dma_buf;
-};
-
-#define INTEL_CE4100 1
-#define INTEL_MRST 2
-#define DT 3
+#define CHNL_ACTIVE__CHANNEL0 BIT(0)
+#define CHNL_ACTIVE__CHANNEL1 BIT(1)
+#define CHNL_ACTIVE__CHANNEL2 BIT(2)
+#define CHNL_ACTIVE__CHANNEL3 BIT(3)
struct denali_nand_info {
struct nand_chip nand;
- int flash_bank; /* currently selected chip */
- int status;
- int platform;
- struct nand_buf buf;
+ unsigned long clk_x_rate; /* bus interface clock rate */
+ int active_bank; /* currently selected bank */
struct device *dev;
- int total_used_banks;
- int page;
- void __iomem *flash_reg; /* Register Interface */
- void __iomem *flash_mem; /* Host Data/Command Interface */
+ void __iomem *reg; /* Register Interface */
+ void __iomem *host; /* Host Data/Command Interface */
/* elements used by ISR */
struct completion complete;
spinlock_t irq_lock;
+ uint32_t irq_mask;
uint32_t irq_status;
int irq;
- int devnum; /* represent how many nands connected */
- int bbtskipbytes;
+ void *buf;
+ dma_addr_t dma_addr;
+ int dma_avail;
+ int devs_per_cs; /* devices connected in parallel */
+ int oob_skip_bytes;
int max_banks;
unsigned int revision;
unsigned int caps;
+ const struct nand_ecc_caps *ecc_caps;
};
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
#define DENALI_CAP_DMA_64BIT BIT(1)
+int denali_calc_ecc_bytes(int step_size, int strength);
extern int denali_init(struct denali_nand_info *denali);
extern void denali_remove(struct denali_nand_info *denali);
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index df9ef36cc2ce..47f398edf18f 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -32,10 +32,31 @@ struct denali_dt {
struct denali_dt_data {
unsigned int revision;
unsigned int caps;
+ const struct nand_ecc_caps *ecc_caps;
};
+NAND_ECC_CAPS_SINGLE(denali_socfpga_ecc_caps, denali_calc_ecc_bytes,
+ 512, 8, 15);
static const struct denali_dt_data denali_socfpga_data = {
.caps = DENALI_CAP_HW_ECC_FIXUP,
+ .ecc_caps = &denali_socfpga_ecc_caps,
+};
+
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5a_ecc_caps, denali_calc_ecc_bytes,
+ 1024, 8, 16, 24);
+static const struct denali_dt_data denali_uniphier_v5a_data = {
+ .caps = DENALI_CAP_HW_ECC_FIXUP |
+ DENALI_CAP_DMA_64BIT,
+ .ecc_caps = &denali_uniphier_v5a_ecc_caps,
+};
+
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5b_ecc_caps, denali_calc_ecc_bytes,
+ 1024, 8, 16);
+static const struct denali_dt_data denali_uniphier_v5b_data = {
+ .revision = 0x0501,
+ .caps = DENALI_CAP_HW_ECC_FIXUP |
+ DENALI_CAP_DMA_64BIT,
+ .ecc_caps = &denali_uniphier_v5b_ecc_caps,
};
static const struct of_device_id denali_nand_dt_ids[] = {
@@ -43,13 +64,21 @@ static const struct of_device_id denali_nand_dt_ids[] = {
.compatible = "altr,socfpga-denali-nand",
.data = &denali_socfpga_data,
},
+ {
+ .compatible = "socionext,uniphier-denali-nand-v5a",
+ .data = &denali_uniphier_v5a_data,
+ },
+ {
+ .compatible = "socionext,uniphier-denali-nand-v5b",
+ .data = &denali_uniphier_v5b_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
static int denali_dt_probe(struct platform_device *pdev)
{
- struct resource *denali_reg, *nand_data;
+ struct resource *res;
struct denali_dt *dt;
const struct denali_dt_data *data;
struct denali_nand_info *denali;
@@ -64,9 +93,9 @@ static int denali_dt_probe(struct platform_device *pdev)
if (data) {
denali->revision = data->revision;
denali->caps = data->caps;
+ denali->ecc_caps = data->ecc_caps;
}
- denali->platform = DT;
denali->dev = &pdev->dev;
denali->irq = platform_get_irq(pdev, 0);
if (denali->irq < 0) {
@@ -74,17 +103,15 @@ static int denali_dt_probe(struct platform_device *pdev)
return denali->irq;
}
- denali_reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "denali_reg");
- denali->flash_reg = devm_ioremap_resource(&pdev->dev, denali_reg);
- if (IS_ERR(denali->flash_reg))
- return PTR_ERR(denali->flash_reg);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "denali_reg");
+ denali->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(denali->reg))
+ return PTR_ERR(denali->reg);
- nand_data = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "nand_data");
- denali->flash_mem = devm_ioremap_resource(&pdev->dev, nand_data);
- if (IS_ERR(denali->flash_mem))
- return PTR_ERR(denali->flash_mem);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ denali->host = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(denali->host))
+ return PTR_ERR(denali->host);
dt->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(dt->clk)) {
@@ -93,6 +120,8 @@ static int denali_dt_probe(struct platform_device *pdev)
}
clk_prepare_enable(dt->clk);
+ denali->clk_x_rate = clk_get_rate(dt->clk);
+
ret = denali_init(denali);
if (ret)
goto out_disable_clk;
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index ac843238b77e..81370c79aa48 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -19,6 +19,9 @@
#define DENALI_NAND_NAME "denali-nand-pci"
+#define INTEL_CE4100 1
+#define INTEL_MRST 2
+
/* List of platforms this NAND controller has be integrated into */
static const struct pci_device_id denali_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
@@ -27,6 +30,8 @@ static const struct pci_device_id denali_pci_ids[] = {
};
MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15);
+
static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int ret;
@@ -45,13 +50,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
if (id->driver_data == INTEL_CE4100) {
- denali->platform = INTEL_CE4100;
mem_base = pci_resource_start(dev, 0);
mem_len = pci_resource_len(dev, 1);
csr_base = pci_resource_start(dev, 1);
csr_len = pci_resource_len(dev, 1);
} else {
- denali->platform = INTEL_MRST;
csr_base = pci_resource_start(dev, 0);
csr_len = pci_resource_len(dev, 0);
mem_base = pci_resource_start(dev, 1);
@@ -65,6 +68,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_master(dev);
denali->dev = &dev->dev;
denali->irq = dev->irq;
+ denali->ecc_caps = &denali_pci_ecc_caps;
+ denali->nand.ecc.options |= NAND_ECC_MAXIMIZE;
+ denali->clk_x_rate = 200000000; /* 200 MHz */
ret = pci_request_regions(dev, DENALI_NAND_NAME);
if (ret) {
@@ -72,14 +78,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return ret;
}
- denali->flash_reg = ioremap_nocache(csr_base, csr_len);
- if (!denali->flash_reg) {
+ denali->reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->reg) {
dev_err(&dev->dev, "Spectra: Unable to remap memory region\n");
return -ENOMEM;
}
- denali->flash_mem = ioremap_nocache(mem_base, mem_len);
- if (!denali->flash_mem) {
+ denali->host = ioremap_nocache(mem_base, mem_len);
+ if (!denali->host) {
dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
ret = -ENOMEM;
goto failed_remap_reg;
@@ -94,9 +100,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return 0;
failed_remap_mem:
- iounmap(denali->flash_mem);
+ iounmap(denali->host);
failed_remap_reg:
- iounmap(denali->flash_reg);
+ iounmap(denali->reg);
return ret;
}
@@ -106,8 +112,8 @@ static void denali_pci_remove(struct pci_dev *dev)
struct denali_nand_info *denali = pci_get_drvdata(dev);
denali_remove(denali);
- iounmap(denali->flash_reg);
- iounmap(denali->flash_mem);
+ iounmap(denali->reg);
+ iounmap(denali->host);
}
static struct pci_driver denali_pci_driver = {
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 7af2a3cd949e..a27a84fbfb84 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -1260,6 +1260,8 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
nand->read_buf = docg4_read_buf;
nand->write_buf = docg4_write_buf16;
nand->erase = docg4_erase_block;
+ nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
nand->ecc.read_page = docg4_read_page;
nand->ecc.write_page = docg4_write_page;
nand->ecc.read_page_raw = docg4_read_page_raw;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 113f76e59937..b9ac16f05057 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -775,6 +775,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->select_chip = fsl_elbc_select_chip;
chip->cmdfunc = fsl_elbc_cmdfunc;
chip->waitfunc = fsl_elbc_wait;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index d1570f512f0b..59408ec2c69f 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -171,34 +171,6 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
ifc_nand_ctrl->index += mtd->writesize;
}
-static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
- u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
- u32 __iomem *mainarea = (u32 __iomem *)addr;
- u8 __iomem *oob = addr + mtd->writesize;
- struct mtd_oob_region oobregion = { };
- int i, section = 0;
-
- for (i = 0; i < mtd->writesize / 4; i++) {
- if (__raw_readl(&mainarea[i]) != 0xffffffff)
- return 0;
- }
-
- mtd_ooblayout_ecc(mtd, section++, &oobregion);
- while (oobregion.length) {
- for (i = 0; i < oobregion.length; i++) {
- if (__raw_readb(&oob[oobregion.offset + i]) != 0xff)
- return 0;
- }
-
- mtd_ooblayout_ecc(mtd, section++, &oobregion);
- }
-
- return 1;
-}
-
/* returns nonzero if entire page is blank */
static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
u32 *eccstat, unsigned int bufnum)
@@ -274,16 +246,14 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
if (errors == 15) {
/*
* Uncorrectable error.
- * OK only if the whole page is blank.
+ * We'll check for blank pages later.
*
* We disable ECCER reporting due to...
* erratum IFC-A002770 -- so report it now if we
* see an uncorrectable error in ECCSTAT.
*/
- if (!is_blank(mtd, bufnum))
- ctrl->nand_stat |=
- IFC_NAND_EVTER_STAT_ECCER;
- break;
+ ctrl->nand_stat |= IFC_NAND_EVTER_STAT_ECCER;
+ continue;
}
mtd->ecc_stats.corrected += errors;
@@ -678,6 +648,39 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
return nand_fsr | NAND_STATUS_WP;
}
+/*
+ * The controller does not check for bitflips in erased pages,
+ * therefore software must check instead.
+ */
+static int check_erased_page(struct nand_chip *chip, u8 *buf)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *ecc = chip->oob_poi;
+ const int ecc_size = chip->ecc.bytes;
+ const int pkt_size = chip->ecc.size;
+ int i, res, bitflips = 0;
+ struct mtd_oob_region oobregion = { };
+
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ ecc += oobregion.offset;
+
+ for (i = 0; i < chip->ecc.steps; ++i) {
+ res = nand_check_erased_ecc_chunk(buf, pkt_size, ecc, ecc_size,
+ NULL, 0,
+ chip->ecc.strength);
+ if (res < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += res;
+
+ bitflips = max(res, bitflips);
+ buf += pkt_size;
+ ecc += ecc_size;
+ }
+
+ return bitflips;
+}
+
static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
@@ -689,8 +692,12 @@ static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
if (oob_required)
fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
- if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
- dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
+ if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER) {
+ if (!oob_required)
+ fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return check_erased_page(chip, buf);
+ }
if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
mtd->ecc_stats.failed++;
@@ -831,6 +838,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->select_chip = fsl_ifc_select_chip;
chip->cmdfunc = fsl_ifc_cmdfunc;
chip->waitfunc = fsl_ifc_wait;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
@@ -904,7 +913,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.algo = NAND_ECC_HAMMING;
}
- if (ctrl->version == FSL_IFC_VERSION_1_1_0)
+ if (ctrl->version >= FSL_IFC_VERSION_1_1_0)
fsl_ifc_sram_init(priv);
return 0;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index cea50d2f218c..9d8b051d3187 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -302,25 +302,13 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
* This routine initializes timing parameters related to NAND memory access in
* FSMC registers
*/
-static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
- uint32_t busw, struct fsmc_nand_timings *timings)
+static void fsmc_nand_setup(struct fsmc_nand_data *host,
+ struct fsmc_nand_timings *tims)
{
uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
uint32_t tclr, tar, thiz, thold, twait, tset;
- struct fsmc_nand_timings *tims;
- struct fsmc_nand_timings default_timings = {
- .tclr = FSMC_TCLR_1,
- .tar = FSMC_TAR_1,
- .thiz = FSMC_THIZ_1,
- .thold = FSMC_THOLD_4,
- .twait = FSMC_TWAIT_6,
- .tset = FSMC_TSET_0,
- };
-
- if (timings)
- tims = timings;
- else
- tims = &default_timings;
+ unsigned int bank = host->bank;
+ void __iomem *regs = host->regs_va;
tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
@@ -329,7 +317,7 @@ static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
- if (busw)
+ if (host->nand.options & NAND_BUSWIDTH_16)
writel_relaxed(value | FSMC_DEVWID_16,
FSMC_NAND_REG(regs, bank, PC));
else
@@ -344,6 +332,87 @@ static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
FSMC_NAND_REG(regs, bank, ATTRIB));
}
+static int fsmc_calc_timings(struct fsmc_nand_data *host,
+ const struct nand_sdr_timings *sdrt,
+ struct fsmc_nand_timings *tims)
+{
+ unsigned long hclk = clk_get_rate(host->clk);
+ unsigned long hclkn = NSEC_PER_SEC / hclk;
+ uint32_t thiz, thold, twait, tset;
+
+ if (sdrt->tRC_min < 30000)
+ return -EOPNOTSUPP;
+
+ tims->tar = DIV_ROUND_UP(sdrt->tAR_min / 1000, hclkn) - 1;
+ if (tims->tar > FSMC_TAR_MASK)
+ tims->tar = FSMC_TAR_MASK;
+ tims->tclr = DIV_ROUND_UP(sdrt->tCLR_min / 1000, hclkn) - 1;
+ if (tims->tclr > FSMC_TCLR_MASK)
+ tims->tclr = FSMC_TCLR_MASK;
+
+ thiz = sdrt->tCS_min - sdrt->tWP_min;
+ tims->thiz = DIV_ROUND_UP(thiz / 1000, hclkn);
+
+ thold = sdrt->tDH_min;
+ if (thold < sdrt->tCH_min)
+ thold = sdrt->tCH_min;
+ if (thold < sdrt->tCLH_min)
+ thold = sdrt->tCLH_min;
+ if (thold < sdrt->tWH_min)
+ thold = sdrt->tWH_min;
+ if (thold < sdrt->tALH_min)
+ thold = sdrt->tALH_min;
+ if (thold < sdrt->tREH_min)
+ thold = sdrt->tREH_min;
+ tims->thold = DIV_ROUND_UP(thold / 1000, hclkn);
+ if (tims->thold == 0)
+ tims->thold = 1;
+ else if (tims->thold > FSMC_THOLD_MASK)
+ tims->thold = FSMC_THOLD_MASK;
+
+ twait = max(sdrt->tRP_min, sdrt->tWP_min);
+ tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
+ if (tims->twait == 0)
+ tims->twait = 1;
+ else if (tims->twait > FSMC_TWAIT_MASK)
+ tims->twait = FSMC_TWAIT_MASK;
+
+ tset = max(sdrt->tCS_min - sdrt->tWP_min,
+ sdrt->tCEA_max - sdrt->tREA_max);
+ tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1;
+ if (tims->tset == 0)
+ tims->tset = 1;
+ else if (tims->tset > FSMC_TSET_MASK)
+ tims->tset = FSMC_TSET_MASK;
+
+ return 0;
+}
+
+static int fsmc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct fsmc_nand_data *host = nand_get_controller_data(nand);
+ struct fsmc_nand_timings tims;
+ const struct nand_sdr_timings *sdrt;
+ int ret;
+
+ sdrt = nand_get_sdr_timings(conf);
+ if (IS_ERR(sdrt))
+ return PTR_ERR(sdrt);
+
+ ret = fsmc_calc_timings(host, sdrt, &tims);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ fsmc_nand_setup(host, &tims);
+
+ return 0;
+}
+
/*
* fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
*/
@@ -796,10 +865,8 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
return -ENOMEM;
ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings,
sizeof(*host->dev_timings));
- if (ret) {
- dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
+ if (ret)
host->dev_timings = NULL;
- }
/* Set default NAND bank to 0 */
host->bank = 0;
@@ -933,9 +1000,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
break;
}
- fsmc_nand_setup(host->regs_va, host->bank,
- nand->options & NAND_BUSWIDTH_16,
- host->dev_timings);
+ if (host->dev_timings)
+ fsmc_nand_setup(host, host->dev_timings);
+ else
+ nand->setup_data_interface = fsmc_setup_data_interface;
if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
@@ -986,6 +1054,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
break;
}
+ case NAND_ECC_ON_DIE:
+ break;
+
default:
dev_err(&pdev->dev, "Unsupported ECC mode!\n");
goto err_probe;
@@ -1073,9 +1144,8 @@ static int fsmc_nand_resume(struct device *dev)
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host) {
clk_prepare_enable(host->clk);
- fsmc_nand_setup(host->regs_va, host->bank,
- host->nand.options & NAND_BUSWIDTH_16,
- host->dev_timings);
+ if (host->dev_timings)
+ fsmc_nand_setup(host, host->dev_timings);
}
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 141bd70a49c2..97787246af41 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -26,7 +26,7 @@
#include "gpmi-regs.h"
#include "bch-regs.h"
-static struct timing_threshod timing_default_threshold = {
+static struct timing_threshold timing_default_threshold = {
.max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
BP_GPMI_TIMING0_DATA_SETUP),
.internal_data_setup_in_ns = 0,
@@ -329,7 +329,7 @@ static unsigned int ns_to_cycles(unsigned int time,
static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
struct gpmi_nfc_hardware_timing *hw)
{
- struct timing_threshod *nfc = &timing_default_threshold;
+ struct timing_threshold *nfc = &timing_default_threshold;
struct resources *r = &this->resources;
struct nand_chip *nand = &this->nand;
struct nand_timing target = this->timing;
@@ -932,7 +932,7 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
nand->select_chip(mtd, 0);
- /* [1] send SET FEATURE commond to NAND */
+ /* [1] send SET FEATURE command to NAND */
feature[0] = mode;
ret = nand->onfi_set_features(mtd, nand,
ONFI_FEATURE_ADDR_TIMING_MODE, feature);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index d52139635b67..50f8d4a1b983 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -82,6 +82,10 @@ static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const char * const gpmi_clks_for_mx2x[] = {
+ "gpmi_io",
+};
+
static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
.ecc = gpmi_ooblayout_ecc,
.free = gpmi_ooblayout_free,
@@ -91,24 +95,48 @@ static const struct gpmi_devdata gpmi_devdata_imx23 = {
.type = IS_MX23,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
};
static const struct gpmi_devdata gpmi_devdata_imx28 = {
.type = IS_MX28,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
+};
+
+static const char * const gpmi_clks_for_mx6[] = {
+ "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
static const struct gpmi_devdata gpmi_devdata_imx6q = {
.type = IS_MX6Q,
.bch_max_ecc_strength = 40,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
};
static const struct gpmi_devdata gpmi_devdata_imx6sx = {
.type = IS_MX6SX,
.bch_max_ecc_strength = 62,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
+};
+
+static const char * const gpmi_clks_for_mx7d[] = {
+ "gpmi_io", "gpmi_bch_apb",
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx7d = {
+ .type = IS_MX7D,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx7d,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d),
};
static irqreturn_t bch_irq(int irq, void *cookie)
@@ -599,35 +627,14 @@ acquire_err:
return -EINVAL;
}
-static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
- "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
-};
-
static int gpmi_get_clks(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
- char **extra_clks = NULL;
struct clk *clk;
int err, i;
- /* The main clock is stored in the first. */
- r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
- if (IS_ERR(r->clock[0])) {
- err = PTR_ERR(r->clock[0]);
- goto err_clock;
- }
-
- /* Get extra clocks */
- if (GPMI_IS_MX6(this))
- extra_clks = extra_clks_for_mx6q;
- if (!extra_clks)
- return 0;
-
- for (i = 1; i < GPMI_CLK_MAX; i++) {
- if (extra_clks[i - 1] == NULL)
- break;
-
- clk = devm_clk_get(this->dev, extra_clks[i - 1]);
+ for (i = 0; i < this->devdata->clks_count; i++) {
+ clk = devm_clk_get(this->dev, this->devdata->clks[i]);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
goto err_clock;
@@ -1929,12 +1936,6 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
return gpmi_alloc_dma_buffer(this);
}
-static void gpmi_nand_exit(struct gpmi_nand_data *this)
-{
- nand_release(nand_to_mtd(&this->nand));
- gpmi_free_dma_buffer(this);
-}
-
static int gpmi_init_last(struct gpmi_nand_data *this)
{
struct nand_chip *chip = &this->nand;
@@ -2048,18 +2049,20 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
ret = nand_boot_init(this);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
ret = chip->scan_bbt(mtd);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
return 0;
+err_nand_cleanup:
+ nand_cleanup(chip);
err_out:
- gpmi_nand_exit(this);
+ gpmi_free_dma_buffer(this);
return ret;
}
@@ -2076,6 +2079,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
}, {
.compatible = "fsl,imx6sx-gpmi-nand",
.data = &gpmi_devdata_imx6sx,
+ }, {
+ .compatible = "fsl,imx7d-gpmi-nand",
+ .data = &gpmi_devdata_imx7d,
}, {}
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
@@ -2129,7 +2135,8 @@ static int gpmi_nand_remove(struct platform_device *pdev)
{
struct gpmi_nand_data *this = platform_get_drvdata(pdev);
- gpmi_nand_exit(this);
+ nand_release(nand_to_mtd(&this->nand));
+ gpmi_free_dma_buffer(this);
release_resources(this);
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f5fa27..9df0ad64e7e0 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -123,13 +123,16 @@ enum gpmi_type {
IS_MX23,
IS_MX28,
IS_MX6Q,
- IS_MX6SX
+ IS_MX6SX,
+ IS_MX7D,
};
struct gpmi_devdata {
enum gpmi_type type;
int bch_max_ecc_strength;
int max_chain_delay; /* See the async EDO mode */
+ const char * const *clks;
+ const int clks_count;
};
struct gpmi_nand_data {
@@ -231,7 +234,7 @@ struct gpmi_nfc_hardware_timing {
};
/**
- * struct timing_threshod - Timing threshold
+ * struct timing_threshold - Timing threshold
* @max_data_setup_cycles: The maximum number of data setup cycles that
* can be expressed in the hardware.
* @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
@@ -253,7 +256,7 @@ struct gpmi_nfc_hardware_timing {
* progress, this is the clock frequency during
* the most recent I/O transaction.
*/
-struct timing_threshod {
+struct timing_threshold {
const unsigned int max_chip_count;
const unsigned int max_data_setup_cycles;
const unsigned int internal_data_setup_in_ns;
@@ -305,6 +308,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
+#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
-#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
+ GPMI_IS_MX7D(x))
#endif
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index e40364eeb556..530caa80b1b6 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -764,6 +764,8 @@ static int hisi_nfc_probe(struct platform_device *pdev)
chip->write_buf = hisi_nfc_write_buf;
chip->read_buf = hisi_nfc_read_buf;
chip->chip_delay = HINFC504_CHIP_DELAY;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
hisi_nfc_host_init(host);
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index a39bb70175ee..8bc835f71b26 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -205,7 +205,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
return -EINVAL;
}
- mtd->ooblayout = &nand_ooblayout_lp_ops;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
return 0;
}
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 6d6eaed2d20c..0e86fb6277c3 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -708,6 +708,8 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->read_buf = mpc5121_nfc_read_buf;
chip->write_buf = mpc5121_nfc_write_buf;
chip->select_chip = mpc5121_nfc_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_HAMMING;
diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c
index dbf256217b3e..6c3a4aab0b48 100644
--- a/drivers/mtd/nand/mtk_ecc.c
+++ b/drivers/mtd/nand/mtk_ecc.c
@@ -28,36 +28,16 @@
#define ECC_IDLE_MASK BIT(0)
#define ECC_IRQ_EN BIT(0)
+#define ECC_PG_IRQ_SEL BIT(1)
#define ECC_OP_ENABLE (1)
#define ECC_OP_DISABLE (0)
#define ECC_ENCCON (0x00)
#define ECC_ENCCNFG (0x04)
-#define ECC_CNFG_4BIT (0)
-#define ECC_CNFG_6BIT (1)
-#define ECC_CNFG_8BIT (2)
-#define ECC_CNFG_10BIT (3)
-#define ECC_CNFG_12BIT (4)
-#define ECC_CNFG_14BIT (5)
-#define ECC_CNFG_16BIT (6)
-#define ECC_CNFG_18BIT (7)
-#define ECC_CNFG_20BIT (8)
-#define ECC_CNFG_22BIT (9)
-#define ECC_CNFG_24BIT (0xa)
-#define ECC_CNFG_28BIT (0xb)
-#define ECC_CNFG_32BIT (0xc)
-#define ECC_CNFG_36BIT (0xd)
-#define ECC_CNFG_40BIT (0xe)
-#define ECC_CNFG_44BIT (0xf)
-#define ECC_CNFG_48BIT (0x10)
-#define ECC_CNFG_52BIT (0x11)
-#define ECC_CNFG_56BIT (0x12)
-#define ECC_CNFG_60BIT (0x13)
#define ECC_MODE_SHIFT (5)
#define ECC_MS_SHIFT (16)
#define ECC_ENCDIADDR (0x08)
#define ECC_ENCIDLE (0x0C)
-#define ECC_ENCPAR(x) (0x10 + (x) * sizeof(u32))
#define ECC_ENCIRQ_EN (0x80)
#define ECC_ENCIRQ_STA (0x84)
#define ECC_DECCON (0x100)
@@ -66,7 +46,6 @@
#define DEC_CNFG_CORRECT (0x3 << 12)
#define ECC_DECIDLE (0x10C)
#define ECC_DECENUM0 (0x114)
-#define ERR_MASK (0x3f)
#define ECC_DECDONE (0x124)
#define ECC_DECIRQ_EN (0x200)
#define ECC_DECIRQ_STA (0x204)
@@ -78,8 +57,17 @@
#define ECC_IRQ_REG(op) ((op) == ECC_ENCODE ? \
ECC_ENCIRQ_EN : ECC_DECIRQ_EN)
+struct mtk_ecc_caps {
+ u32 err_mask;
+ const u8 *ecc_strength;
+ u8 num_ecc_strength;
+ u32 encode_parity_reg0;
+ int pg_irq_sel;
+};
+
struct mtk_ecc {
struct device *dev;
+ const struct mtk_ecc_caps *caps;
void __iomem *regs;
struct clk *clk;
@@ -87,7 +75,18 @@ struct mtk_ecc {
struct mutex lock;
u32 sectors;
- u8 eccdata[112];
+ u8 *eccdata;
+};
+
+/* ecc strength that each IP supports */
+static const u8 ecc_strength_mt2701[] = {
+ 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+ 40, 44, 48, 52, 56, 60
+};
+
+static const u8 ecc_strength_mt2712[] = {
+ 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+ 40, 44, 48, 52, 56, 60, 68, 72, 80
};
static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
@@ -136,77 +135,24 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
return IRQ_HANDLED;
}
-static void mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
+static int mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
- u32 ecc_bit = ECC_CNFG_4BIT, dec_sz, enc_sz;
- u32 reg;
-
- switch (config->strength) {
- case 4:
- ecc_bit = ECC_CNFG_4BIT;
- break;
- case 6:
- ecc_bit = ECC_CNFG_6BIT;
- break;
- case 8:
- ecc_bit = ECC_CNFG_8BIT;
- break;
- case 10:
- ecc_bit = ECC_CNFG_10BIT;
- break;
- case 12:
- ecc_bit = ECC_CNFG_12BIT;
- break;
- case 14:
- ecc_bit = ECC_CNFG_14BIT;
- break;
- case 16:
- ecc_bit = ECC_CNFG_16BIT;
- break;
- case 18:
- ecc_bit = ECC_CNFG_18BIT;
- break;
- case 20:
- ecc_bit = ECC_CNFG_20BIT;
- break;
- case 22:
- ecc_bit = ECC_CNFG_22BIT;
- break;
- case 24:
- ecc_bit = ECC_CNFG_24BIT;
- break;
- case 28:
- ecc_bit = ECC_CNFG_28BIT;
- break;
- case 32:
- ecc_bit = ECC_CNFG_32BIT;
- break;
- case 36:
- ecc_bit = ECC_CNFG_36BIT;
- break;
- case 40:
- ecc_bit = ECC_CNFG_40BIT;
- break;
- case 44:
- ecc_bit = ECC_CNFG_44BIT;
- break;
- case 48:
- ecc_bit = ECC_CNFG_48BIT;
- break;
- case 52:
- ecc_bit = ECC_CNFG_52BIT;
- break;
- case 56:
- ecc_bit = ECC_CNFG_56BIT;
- break;
- case 60:
- ecc_bit = ECC_CNFG_60BIT;
- break;
- default:
- dev_err(ecc->dev, "invalid strength %d, default to 4 bits\n",
+ u32 ecc_bit, dec_sz, enc_sz;
+ u32 reg, i;
+
+ for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+ if (ecc->caps->ecc_strength[i] == config->strength)
+ break;
+ }
+
+ if (i == ecc->caps->num_ecc_strength) {
+ dev_err(ecc->dev, "invalid ecc strength %d\n",
config->strength);
+ return -EINVAL;
}
+ ecc_bit = i;
+
if (config->op == ECC_ENCODE) {
/* configure ECC encoder (in bits) */
enc_sz = config->len << 3;
@@ -232,6 +178,8 @@ static void mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
if (config->sectors)
ecc->sectors = 1 << (config->sectors - 1);
}
+
+ return 0;
}
void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
@@ -247,8 +195,8 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
offset = (i >> 2) << 2;
err = readl(ecc->regs + ECC_DECENUM0 + offset);
err = err >> ((i % 4) * 8);
- err &= ERR_MASK;
- if (err == ERR_MASK) {
+ err &= ecc->caps->err_mask;
+ if (err == ecc->caps->err_mask) {
/* uncorrectable errors */
stats->failed++;
continue;
@@ -313,6 +261,7 @@ EXPORT_SYMBOL(of_mtk_ecc_get);
int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
enum mtk_ecc_operation op = config->op;
+ u16 reg_val;
int ret;
ret = mutex_lock_interruptible(&ecc->lock);
@@ -322,11 +271,27 @@ int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
}
mtk_ecc_wait_idle(ecc, op);
- mtk_ecc_config(ecc, config);
- writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
- init_completion(&ecc->done);
- writew(ECC_IRQ_EN, ecc->regs + ECC_IRQ_REG(op));
+ ret = mtk_ecc_config(ecc, config);
+ if (ret) {
+ mutex_unlock(&ecc->lock);
+ return ret;
+ }
+
+ if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) {
+ init_completion(&ecc->done);
+ reg_val = ECC_IRQ_EN;
+ /*
+ * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it
+ * means this chip can only generate one ecc irq during page
+ * read / write. If is 0, generate one ecc irq each ecc step.
+ */
+ if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
+ reg_val |= ECC_PG_IRQ_SEL;
+ writew(reg_val, ecc->regs + ECC_IRQ_REG(op));
+ }
+
+ writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
return 0;
}
@@ -396,7 +361,9 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
/* write the parity bytes generated by the ECC back to temp buffer */
- __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4));
+ __ioread32_copy(ecc->eccdata,
+ ecc->regs + ecc->caps->encode_parity_reg0,
+ round_up(len, 4));
/* copy into possibly unaligned OOB region with actual length */
memcpy(data + bytes, ecc->eccdata, len);
@@ -409,37 +376,79 @@ timeout:
}
EXPORT_SYMBOL(mtk_ecc_encode);
-void mtk_ecc_adjust_strength(u32 *p)
+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p)
{
- u32 ecc[] = {4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
- 40, 44, 48, 52, 56, 60};
+ const u8 *ecc_strength = ecc->caps->ecc_strength;
int i;
- for (i = 0; i < ARRAY_SIZE(ecc); i++) {
- if (*p <= ecc[i]) {
+ for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+ if (*p <= ecc_strength[i]) {
if (!i)
- *p = ecc[i];
- else if (*p != ecc[i])
- *p = ecc[i - 1];
+ *p = ecc_strength[i];
+ else if (*p != ecc_strength[i])
+ *p = ecc_strength[i - 1];
return;
}
}
- *p = ecc[ARRAY_SIZE(ecc) - 1];
+ *p = ecc_strength[ecc->caps->num_ecc_strength - 1];
}
EXPORT_SYMBOL(mtk_ecc_adjust_strength);
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+ .err_mask = 0x3f,
+ .ecc_strength = ecc_strength_mt2701,
+ .num_ecc_strength = 20,
+ .encode_parity_reg0 = 0x10,
+ .pg_irq_sel = 0,
+};
+
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ .err_mask = 0x7f,
+ .ecc_strength = ecc_strength_mt2712,
+ .num_ecc_strength = 23,
+ .encode_parity_reg0 = 0x300,
+ .pg_irq_sel = 1,
+};
+
+static const struct of_device_id mtk_ecc_dt_match[] = {
+ {
+ .compatible = "mediatek,mt2701-ecc",
+ .data = &mtk_ecc_caps_mt2701,
+ }, {
+ .compatible = "mediatek,mt2712-ecc",
+ .data = &mtk_ecc_caps_mt2712,
+ },
+ {},
+};
+
static int mtk_ecc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_ecc *ecc;
struct resource *res;
+ const struct of_device_id *of_ecc_id = NULL;
+ u32 max_eccdata_size;
int irq, ret;
ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
if (!ecc)
return -ENOMEM;
+ of_ecc_id = of_match_device(mtk_ecc_dt_match, &pdev->dev);
+ if (!of_ecc_id)
+ return -ENODEV;
+
+ ecc->caps = of_ecc_id->data;
+
+ max_eccdata_size = ecc->caps->num_ecc_strength - 1;
+ max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
+ max_eccdata_size = (max_eccdata_size * ECC_PARITY_BITS + 7) >> 3;
+ max_eccdata_size = round_up(max_eccdata_size, 4);
+ ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
+ if (!ecc->eccdata)
+ return -ENOMEM;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ecc->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(ecc->regs)) {
@@ -500,19 +509,12 @@ static int mtk_ecc_resume(struct device *dev)
return ret;
}
- mtk_ecc_hw_init(ecc);
-
return 0;
}
static SIMPLE_DEV_PM_OPS(mtk_ecc_pm_ops, mtk_ecc_suspend, mtk_ecc_resume);
#endif
-static const struct of_device_id mtk_ecc_dt_match[] = {
- { .compatible = "mediatek,mt2701-ecc" },
- {},
-};
-
MODULE_DEVICE_TABLE(of, mtk_ecc_dt_match);
static struct platform_driver mtk_ecc_driver = {
diff --git a/drivers/mtd/nand/mtk_ecc.h b/drivers/mtd/nand/mtk_ecc.h
index cbeba5cd1c13..d245c14f1b80 100644
--- a/drivers/mtd/nand/mtk_ecc.h
+++ b/drivers/mtd/nand/mtk_ecc.h
@@ -42,7 +42,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int);
int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation);
int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
void mtk_ecc_disable(struct mtk_ecc *);
-void mtk_ecc_adjust_strength(u32 *);
+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
void mtk_ecc_release(struct mtk_ecc *);
diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
index 6c517c682939..f7ae99464375 100644
--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/iopoll.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include "mtk_ecc.h"
/* NAND controller register definition */
@@ -38,23 +39,6 @@
#define NFI_PAGEFMT (0x04)
#define PAGEFMT_FDM_ECC_SHIFT (12)
#define PAGEFMT_FDM_SHIFT (8)
-#define PAGEFMT_SPARE_16 (0)
-#define PAGEFMT_SPARE_26 (1)
-#define PAGEFMT_SPARE_27 (2)
-#define PAGEFMT_SPARE_28 (3)
-#define PAGEFMT_SPARE_32 (4)
-#define PAGEFMT_SPARE_36 (5)
-#define PAGEFMT_SPARE_40 (6)
-#define PAGEFMT_SPARE_44 (7)
-#define PAGEFMT_SPARE_48 (8)
-#define PAGEFMT_SPARE_49 (9)
-#define PAGEFMT_SPARE_50 (0xa)
-#define PAGEFMT_SPARE_51 (0xb)
-#define PAGEFMT_SPARE_52 (0xc)
-#define PAGEFMT_SPARE_62 (0xd)
-#define PAGEFMT_SPARE_63 (0xe)
-#define PAGEFMT_SPARE_64 (0xf)
-#define PAGEFMT_SPARE_SHIFT (4)
#define PAGEFMT_SEC_SEL_512 BIT(2)
#define PAGEFMT_512_2K (0)
#define PAGEFMT_2K_4K (1)
@@ -115,6 +99,17 @@
#define MTK_RESET_TIMEOUT (1000000)
#define MTK_MAX_SECTOR (16)
#define MTK_NAND_MAX_NSELS (2)
+#define MTK_NFC_MIN_SPARE (16)
+#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
+ ((tpoecs) << 28 | (tprecs) << 22 | (tc2r) << 16 | \
+ (tw2r) << 12 | (twh) << 8 | (twst) << 4 | (trlt))
+
+struct mtk_nfc_caps {
+ const u8 *spare_size;
+ u8 num_spare_size;
+ u8 pageformat_spare_shift;
+ u8 nfi_clk_div;
+};
struct mtk_nfc_bad_mark_ctl {
void (*bm_swap)(struct mtd_info *, u8 *buf, int raw);
@@ -155,6 +150,7 @@ struct mtk_nfc {
struct mtk_ecc *ecc;
struct device *dev;
+ const struct mtk_nfc_caps *caps;
void __iomem *regs;
struct completion done;
@@ -163,6 +159,20 @@ struct mtk_nfc {
u8 *buffer;
};
+/*
+ * supported spare size of each IP.
+ * order should be the same with the spare size bitfiled defination of
+ * register NFI_PAGEFMT.
+ */
+static const u8 spare_size_mt2701[] = {
+ 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 63, 64
+};
+
+static const u8 spare_size_mt2712[] = {
+ 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 61, 63, 64, 67,
+ 74
+};
+
static inline struct mtk_nfc_nand_chip *to_mtk_nand(struct nand_chip *nand)
{
return container_of(nand, struct mtk_nfc_nand_chip, nand);
@@ -308,7 +318,7 @@ static int mtk_nfc_hw_runtime_config(struct mtd_info *mtd)
struct nand_chip *chip = mtd_to_nand(mtd);
struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
struct mtk_nfc *nfc = nand_get_controller_data(chip);
- u32 fmt, spare;
+ u32 fmt, spare, i;
if (!mtd->writesize)
return 0;
@@ -352,63 +362,21 @@ static int mtk_nfc_hw_runtime_config(struct mtd_info *mtd)
if (chip->ecc.size == 1024)
spare >>= 1;
- switch (spare) {
- case 16:
- fmt |= (PAGEFMT_SPARE_16 << PAGEFMT_SPARE_SHIFT);
- break;
- case 26:
- fmt |= (PAGEFMT_SPARE_26 << PAGEFMT_SPARE_SHIFT);
- break;
- case 27:
- fmt |= (PAGEFMT_SPARE_27 << PAGEFMT_SPARE_SHIFT);
- break;
- case 28:
- fmt |= (PAGEFMT_SPARE_28 << PAGEFMT_SPARE_SHIFT);
- break;
- case 32:
- fmt |= (PAGEFMT_SPARE_32 << PAGEFMT_SPARE_SHIFT);
- break;
- case 36:
- fmt |= (PAGEFMT_SPARE_36 << PAGEFMT_SPARE_SHIFT);
- break;
- case 40:
- fmt |= (PAGEFMT_SPARE_40 << PAGEFMT_SPARE_SHIFT);
- break;
- case 44:
- fmt |= (PAGEFMT_SPARE_44 << PAGEFMT_SPARE_SHIFT);
- break;
- case 48:
- fmt |= (PAGEFMT_SPARE_48 << PAGEFMT_SPARE_SHIFT);
- break;
- case 49:
- fmt |= (PAGEFMT_SPARE_49 << PAGEFMT_SPARE_SHIFT);
- break;
- case 50:
- fmt |= (PAGEFMT_SPARE_50 << PAGEFMT_SPARE_SHIFT);
- break;
- case 51:
- fmt |= (PAGEFMT_SPARE_51 << PAGEFMT_SPARE_SHIFT);
- break;
- case 52:
- fmt |= (PAGEFMT_SPARE_52 << PAGEFMT_SPARE_SHIFT);
- break;
- case 62:
- fmt |= (PAGEFMT_SPARE_62 << PAGEFMT_SPARE_SHIFT);
- break;
- case 63:
- fmt |= (PAGEFMT_SPARE_63 << PAGEFMT_SPARE_SHIFT);
- break;
- case 64:
- fmt |= (PAGEFMT_SPARE_64 << PAGEFMT_SPARE_SHIFT);
- break;
- default:
- dev_err(nfc->dev, "invalid spare per sector %d\n", spare);
+ for (i = 0; i < nfc->caps->num_spare_size; i++) {
+ if (nfc->caps->spare_size[i] == spare)
+ break;
+ }
+
+ if (i == nfc->caps->num_spare_size) {
+ dev_err(nfc->dev, "invalid spare size %d\n", spare);
return -EINVAL;
}
+ fmt |= i << nfc->caps->pageformat_spare_shift;
+
fmt |= mtk_nand->fdm.reg_size << PAGEFMT_FDM_SHIFT;
fmt |= mtk_nand->fdm.ecc_size << PAGEFMT_FDM_ECC_SHIFT;
- nfi_writew(nfc, fmt, NFI_PAGEFMT);
+ nfi_writel(nfc, fmt, NFI_PAGEFMT);
nfc->ecc_cfg.strength = chip->ecc.strength;
nfc->ecc_cfg.len = chip->ecc.size + mtk_nand->fdm.ecc_size;
@@ -531,6 +499,74 @@ static void mtk_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
mtk_nfc_write_byte(mtd, buf[i]);
}
+static int mtk_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct mtk_nfc *nfc = nand_get_controller_data(mtd_to_nand(mtd));
+ const struct nand_sdr_timings *timings;
+ u32 rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return -ENOTSUPP;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ rate = clk_get_rate(nfc->clk.nfi_clk);
+ /* There is a frequency divider in some IPs */
+ rate /= nfc->caps->nfi_clk_div;
+
+ /* turn clock rate into KHZ */
+ rate /= 1000;
+
+ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000;
+ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000);
+ tpoecs &= 0xf;
+
+ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000;
+ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000);
+ tprecs &= 0x3f;
+
+ /* sdr interface has no tCR which means CE# low to RE# low */
+ tc2r = 0;
+
+ tw2r = timings->tWHR_min / 1000;
+ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000);
+ tw2r = DIV_ROUND_UP(tw2r - 1, 2);
+ tw2r &= 0xf;
+
+ twh = max(timings->tREH_min, timings->tWH_min) / 1000;
+ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1;
+ twh &= 0xf;
+
+ twst = timings->tWP_min / 1000;
+ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1;
+ twst &= 0xf;
+
+ trlt = max(timings->tREA_max, timings->tRP_min) / 1000;
+ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1;
+ trlt &= 0xf;
+
+ /*
+ * ACCON: access timing control register
+ * -------------------------------------
+ * 31:28: tpoecs, minimum required time for CS post pulling down after
+ * accessing the device
+ * 27:22: tprecs, minimum required time for CS pre pulling down before
+ * accessing the device
+ * 21:16: tc2r, minimum required time from NCEB low to NREB low
+ * 15:12: tw2r, minimum required time from NWEB high to NREB low.
+ * 11:08: twh, write enable hold time
+ * 07:04: twst, write wait states
+ * 03:00: trlt, read wait states
+ */
+ trlt = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt);
+ nfi_writel(nfc, trlt, NFI_ACCCON);
+
+ return 0;
+}
+
static int mtk_nfc_sector_encode(struct nand_chip *chip, u8 *data)
{
struct mtk_nfc *nfc = nand_get_controller_data(chip);
@@ -988,28 +1024,13 @@ static int mtk_nfc_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
static inline void mtk_nfc_hw_init(struct mtk_nfc *nfc)
{
/*
- * ACCON: access timing control register
- * -------------------------------------
- * 31:28: minimum required time for CS post pulling down after accessing
- * the device
- * 27:22: minimum required time for CS pre pulling down before accessing
- * the device
- * 21:16: minimum required time from NCEB low to NREB low
- * 15:12: minimum required time from NWEB high to NREB low.
- * 11:08: write enable hold time
- * 07:04: write wait states
- * 03:00: read wait states
- */
- nfi_writel(nfc, 0x10804211, NFI_ACCCON);
-
- /*
* CNRNB: nand ready/busy register
* -------------------------------
* 7:4: timeout register for polling the NAND busy/ready signal
* 0 : poll the status of the busy/ready signal after [7:4]*16 cycles.
*/
nfi_writew(nfc, 0xf1, NFI_CNRNB);
- nfi_writew(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT);
+ nfi_writel(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT);
mtk_nfc_hw_reset(nfc);
@@ -1131,12 +1152,12 @@ static void mtk_nfc_set_bad_mark_ctl(struct mtk_nfc_bad_mark_ctl *bm_ctl,
}
}
-static void mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
+static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
- u32 spare[] = {16, 26, 27, 28, 32, 36, 40, 44,
- 48, 49, 50, 51, 52, 62, 63, 64};
- u32 eccsteps, i;
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
+ const u8 *spare = nfc->caps->spare_size;
+ u32 eccsteps, i, closest_spare = 0;
eccsteps = mtd->writesize / nand->ecc.size;
*sps = mtd->oobsize / eccsteps;
@@ -1144,28 +1165,31 @@ static void mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
if (nand->ecc.size == 1024)
*sps >>= 1;
- for (i = 0; i < ARRAY_SIZE(spare); i++) {
- if (*sps <= spare[i]) {
- if (!i)
- *sps = spare[i];
- else if (*sps != spare[i])
- *sps = spare[i - 1];
- break;
+ if (*sps < MTK_NFC_MIN_SPARE)
+ return -EINVAL;
+
+ for (i = 0; i < nfc->caps->num_spare_size; i++) {
+ if (*sps >= spare[i] && spare[i] >= spare[closest_spare]) {
+ closest_spare = i;
+ if (*sps == spare[i])
+ break;
}
}
- if (i >= ARRAY_SIZE(spare))
- *sps = spare[ARRAY_SIZE(spare) - 1];
+ *sps = spare[closest_spare];
if (nand->ecc.size == 1024)
*sps <<= 1;
+
+ return 0;
}
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
- int free;
+ int free, ret;
/* support only ecc hw mode */
if (nand->ecc.mode != NAND_ECC_HW) {
@@ -1194,7 +1218,9 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
nand->ecc.size = 1024;
}
- mtk_nfc_set_spare_per_sector(&spare, mtd);
+ ret = mtk_nfc_set_spare_per_sector(&spare, mtd);
+ if (ret)
+ return ret;
/* calculate oob bytes except ecc parity data */
free = ((nand->ecc.strength * ECC_PARITY_BITS) + 7) >> 3;
@@ -1214,7 +1240,7 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
}
}
- mtk_ecc_adjust_strength(&nand->ecc.strength);
+ mtk_ecc_adjust_strength(nfc->ecc, &nand->ecc.strength);
dev_info(dev, "eccsize %d eccstrength %d\n",
nand->ecc.size, nand->ecc.strength);
@@ -1271,6 +1297,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand->read_byte = mtk_nfc_read_byte;
nand->read_buf = mtk_nfc_read_buf;
nand->cmd_ctrl = mtk_nfc_cmd_ctrl;
+ nand->setup_data_interface = mtk_nfc_setup_data_interface;
/* set default mode in case dt entry is missing */
nand->ecc.mode = NAND_ECC_HW;
@@ -1312,7 +1339,10 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
return -EINVAL;
}
- mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
+ ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
+ if (ret)
+ return ret;
+
mtk_nfc_set_fdm(&chip->fdm, mtd);
mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
@@ -1354,12 +1384,39 @@ static int mtk_nfc_nand_chips_init(struct device *dev, struct mtk_nfc *nfc)
return 0;
}
+static const struct mtk_nfc_caps mtk_nfc_caps_mt2701 = {
+ .spare_size = spare_size_mt2701,
+ .num_spare_size = 16,
+ .pageformat_spare_shift = 4,
+ .nfi_clk_div = 1,
+};
+
+static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = {
+ .spare_size = spare_size_mt2712,
+ .num_spare_size = 19,
+ .pageformat_spare_shift = 16,
+ .nfi_clk_div = 2,
+};
+
+static const struct of_device_id mtk_nfc_id_table[] = {
+ {
+ .compatible = "mediatek,mt2701-nfc",
+ .data = &mtk_nfc_caps_mt2701,
+ }, {
+ .compatible = "mediatek,mt2712-nfc",
+ .data = &mtk_nfc_caps_mt2712,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mtk_nfc_id_table);
+
static int mtk_nfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct mtk_nfc *nfc;
struct resource *res;
+ const struct of_device_id *of_nfc_id = NULL;
int ret, irq;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
@@ -1423,6 +1480,14 @@ static int mtk_nfc_probe(struct platform_device *pdev)
goto clk_disable;
}
+ of_nfc_id = of_match_device(mtk_nfc_id_table, &pdev->dev);
+ if (!of_nfc_id) {
+ ret = -ENODEV;
+ goto clk_disable;
+ }
+
+ nfc->caps = of_nfc_id->data;
+
platform_set_drvdata(pdev, nfc);
ret = mtk_nfc_nand_chips_init(dev, nfc);
@@ -1485,8 +1550,6 @@ static int mtk_nfc_resume(struct device *dev)
if (ret)
return ret;
- mtk_nfc_hw_init(nfc);
-
/* reset NAND chip if VCC was powered off */
list_for_each_entry(chip, &nfc->chips, node) {
nand = &chip->nand;
@@ -1503,12 +1566,6 @@ static int mtk_nfc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(mtk_nfc_pm_ops, mtk_nfc_suspend, mtk_nfc_resume);
#endif
-static const struct of_device_id mtk_nfc_id_table[] = {
- { .compatible = "mediatek,mt2701-nfc" },
- {}
-};
-MODULE_DEVICE_TABLE(of, mtk_nfc_id_table);
-
static struct platform_driver mtk_nfc_driver = {
.probe = mtk_nfc_probe,
.remove = mtk_nfc_remove,
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 61ca020c5272..a764d5ca7536 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -152,9 +152,8 @@ struct mxc_nand_devtype_data {
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf);
/*
* On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
@@ -1015,9 +1014,8 @@ static void preset_v1(struct mtd_info *mtd)
writew(0x4, NFC_V1_V2_WRPROT);
}
-static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
@@ -1075,7 +1073,7 @@ static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd,
return -EINVAL;
}
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
ret = clk_set_rate(host->clk, rate);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bf8486c406d3..5fa5ddc94834 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -755,6 +755,16 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
return;
/* This applies to read commands */
+ case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that we should not wait for the
+ * device to be ready.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
default:
/*
* If we don't have access to the busy pin, we apply the given
@@ -889,6 +899,15 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
return;
case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that READSTART should not be
+ * issued.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
@@ -1044,12 +1063,13 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
/**
* nand_reset_data_interface - Reset data interface and timings
* @chip: The NAND chip
+ * @chipnr: Internal die id
*
* Reset the Data interface and timings to ONFI mode 0.
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_reset_data_interface(struct nand_chip *chip)
+static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
{
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_data_interface *conf;
@@ -1073,7 +1093,7 @@ static int nand_reset_data_interface(struct nand_chip *chip)
*/
conf = nand_get_default_data_interface();
- ret = chip->setup_data_interface(mtd, conf, false);
+ ret = chip->setup_data_interface(mtd, chipnr, conf);
if (ret)
pr_err("Failed to configure data interface to SDR timing mode 0\n");
@@ -1083,6 +1103,7 @@ static int nand_reset_data_interface(struct nand_chip *chip)
/**
* nand_setup_data_interface - Setup the best data interface and timings
* @chip: The NAND chip
+ * @chipnr: Internal die id
*
* Find and configure the best data interface and NAND timings supported by
* the chip and the driver.
@@ -1092,7 +1113,7 @@ static int nand_reset_data_interface(struct nand_chip *chip)
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_setup_data_interface(struct nand_chip *chip)
+static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
@@ -1116,7 +1137,7 @@ static int nand_setup_data_interface(struct nand_chip *chip)
goto err;
}
- ret = chip->setup_data_interface(mtd, chip->data_interface, false);
+ ret = chip->setup_data_interface(mtd, chipnr, chip->data_interface);
err:
return ret;
}
@@ -1167,8 +1188,10 @@ static int nand_init_data_interface(struct nand_chip *chip)
if (ret)
continue;
- ret = chip->setup_data_interface(mtd, chip->data_interface,
- true);
+ /* Pass -1 to only */
+ ret = chip->setup_data_interface(mtd,
+ NAND_DATA_IFACE_CHECK_ONLY,
+ chip->data_interface);
if (!ret) {
chip->onfi_timing_mode_default = mode;
break;
@@ -1195,7 +1218,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- ret = nand_reset_data_interface(chip);
+ ret = nand_reset_data_interface(chip, chipnr);
if (ret)
return ret;
@@ -1208,7 +1231,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
- ret = nand_setup_data_interface(chip);
+ ret = nand_setup_data_interface(chip, chipnr);
chip->select_chip(mtd, -1);
if (ret)
return ret;
@@ -1424,7 +1447,10 @@ static int nand_check_erased_buf(void *buf, int len, int bitflips_threshold)
for (; len >= sizeof(long);
len -= sizeof(long), bitmap += sizeof(long)) {
- weight = hweight_long(*((unsigned long *)bitmap));
+ unsigned long d = *((unsigned long *)bitmap);
+ if (d == ~0UL)
+ continue;
+ weight = hweight_long(d);
bitflips += BITS_PER_LONG - weight;
if (unlikely(bitflips > bitflips_threshold))
return -EBADMSG;
@@ -1527,14 +1553,15 @@ EXPORT_SYMBOL(nand_check_erased_ecc_chunk);
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
if (oob_required)
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
+EXPORT_SYMBOL(nand_read_page_raw);
/**
* nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
@@ -2472,8 +2499,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page)
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
chip->write_buf(mtd, buf, mtd->writesize);
if (oob_required)
@@ -2481,6 +2508,7 @@ static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
return 0;
}
+EXPORT_SYMBOL(nand_write_page_raw);
/**
* nand_write_page_raw_syndrome - [INTERN] raw page write function
@@ -2718,7 +2746,7 @@ static int nand_write_page_syndrome(struct mtd_info *mtd,
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw)
+ int oob_required, int page, int raw)
{
int status, subpage;
@@ -2744,30 +2772,12 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (status < 0)
return status;
- /*
- * Cached progamming disabled for now. Not sure if it's worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
- */
- cached = 0;
+ if (nand_standard_page_accessors(&chip->ecc)) {
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- if (!cached || !NAND_HAS_CACHEPROG(chip)) {
-
- if (nand_standard_page_accessors(&chip->ecc))
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
status = chip->waitfunc(mtd, chip);
- /*
- * See if operation failed and additional status checks are
- * available.
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_WRITING, status,
- page);
-
if (status & NAND_STATUS_FAIL)
return -EIO;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
}
return 0;
@@ -2875,7 +2885,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
while (1) {
int bytes = mtd->writesize;
- int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
int use_bufpoi;
int part_pagewr = (column || writelen < mtd->writesize);
@@ -2893,7 +2902,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (use_bufpoi) {
pr_debug("%s: using write bounce buffer for buf@%p\n",
__func__, buf);
- cached = 0;
if (part_pagewr)
bytes = min_t(int, bytes - column, writelen);
chip->pagebuf = -1;
@@ -2912,7 +2920,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
}
ret = nand_write_page(mtd, chip, column, bytes, wbuf,
- oob_required, page, cached,
+ oob_required, page,
(ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -3228,14 +3236,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
status = chip->erase(mtd, page & chip->pagemask);
- /*
- * See if operation failed and additional status checks are
- * available
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_ERASING,
- status, page);
-
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
pr_debug("%s: failed erase, page 0x%08x\n",
@@ -3422,6 +3422,25 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_onfi_get_set_features_notsupp - set/get features stub returning
+ * -ENOTSUPP
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ *
+ * Should be used by NAND controller drivers that do not support the SET/GET
+ * FEATURES operations.
+ */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param)
+{
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(nand_onfi_get_set_features_notsupp);
+
+/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
* @mtd: MTD device structure
*/
@@ -4180,6 +4199,7 @@ static const char * const nand_ecc_modes[] = {
[NAND_ECC_HW] = "hw",
[NAND_ECC_HW_SYNDROME] = "hw_syndrome",
[NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
+ [NAND_ECC_ON_DIE] = "on-die",
};
static int of_get_nand_ecc_mode(struct device_node *np)
@@ -4374,7 +4394,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
* For the other dies, nand_reset() will automatically switch to the
* best mode for us.
*/
- ret = nand_setup_data_interface(chip);
+ ret = nand_setup_data_interface(chip, 0);
if (ret)
goto err_nand_init;
@@ -4512,6 +4532,226 @@ static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
}
}
+/**
+ * nand_check_ecc_caps - check the sanity of preset ECC settings
+ * @chip: nand chip info structure
+ * @caps: ECC caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * When ECC step size and strength are already set, check if they are supported
+ * by the controller and the calculated ECC bytes fit within the chip's OOB.
+ * On success, the calculated ECC bytes is set.
+ */
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int preset_step = chip->ecc.size;
+ int preset_strength = chip->ecc.strength;
+ int nsteps, ecc_bytes;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ if (!preset_step || !preset_strength)
+ return -ENODATA;
+
+ nsteps = mtd->writesize / preset_step;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+
+ if (stepinfo->stepsize != preset_step)
+ continue;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ if (stepinfo->strengths[j] != preset_strength)
+ continue;
+
+ ecc_bytes = caps->calc_ecc_bytes(preset_step,
+ preset_strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ return ecc_bytes;
+
+ if (ecc_bytes * nsteps > oobavail) {
+ pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB",
+ preset_step, preset_strength);
+ return -ENOSPC;
+ }
+
+ chip->ecc.bytes = ecc_bytes;
+
+ return 0;
+ }
+ }
+
+ pr_err("ECC (step, strength) = (%d, %d) not supported on this controller",
+ preset_step, preset_strength);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(nand_check_ecc_caps);
+
+/**
+ * nand_match_ecc_req - meet the chip's requirement with least ECC bytes
+ * @chip: nand chip info structure
+ * @caps: ECC engine caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * If a chip's ECC requirement is provided, try to meet it with the least
+ * number of ECC bytes (i.e. with the largest number of OOB-free bytes).
+ * On success, the chosen ECC settings are set.
+ */
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int req_step = chip->ecc_step_ds;
+ int req_strength = chip->ecc_strength_ds;
+ int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
+ int best_step, best_strength, best_ecc_bytes;
+ int best_ecc_bytes_total = INT_MAX;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ /* No information provided by the NAND chip */
+ if (!req_step || !req_strength)
+ return -ENOTSUPP;
+
+ /* number of correctable bits the chip requires in a page */
+ req_corr = mtd->writesize / req_step * req_strength;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+ step_size = stepinfo->stepsize;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ strength = stepinfo->strengths[j];
+
+ /*
+ * If both step size and strength are smaller than the
+ * chip's requirement, it is not easy to compare the
+ * resulted reliability.
+ */
+ if (step_size < req_step && strength < req_strength)
+ continue;
+
+ if (mtd->writesize % step_size)
+ continue;
+
+ nsteps = mtd->writesize / step_size;
+
+ ecc_bytes = caps->calc_ecc_bytes(step_size, strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ continue;
+ ecc_bytes_total = ecc_bytes * nsteps;
+
+ if (ecc_bytes_total > oobavail ||
+ strength * nsteps < req_corr)
+ continue;
+
+ /*
+ * We assume the best is to meet the chip's requrement
+ * with the least number of ECC bytes.
+ */
+ if (ecc_bytes_total < best_ecc_bytes_total) {
+ best_ecc_bytes_total = ecc_bytes_total;
+ best_step = step_size;
+ best_strength = strength;
+ best_ecc_bytes = ecc_bytes;
+ }
+ }
+ }
+
+ if (best_ecc_bytes_total == INT_MAX)
+ return -ENOTSUPP;
+
+ chip->ecc.size = best_step;
+ chip->ecc.strength = best_strength;
+ chip->ecc.bytes = best_ecc_bytes;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nand_match_ecc_req);
+
+/**
+ * nand_maximize_ecc - choose the max ECC strength available
+ * @chip: nand chip info structure
+ * @caps: ECC engine caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * Choose the max ECC strength that is supported on the controller, and can fit
+ * within the chip's OOB. On success, the chosen ECC settings are set.
+ */
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int step_size, strength, nsteps, ecc_bytes, corr;
+ int best_corr = 0;
+ int best_step = 0;
+ int best_strength, best_ecc_bytes;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+ step_size = stepinfo->stepsize;
+
+ /* If chip->ecc.size is already set, respect it */
+ if (chip->ecc.size && step_size != chip->ecc.size)
+ continue;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ strength = stepinfo->strengths[j];
+
+ if (mtd->writesize % step_size)
+ continue;
+
+ nsteps = mtd->writesize / step_size;
+
+ ecc_bytes = caps->calc_ecc_bytes(step_size, strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ continue;
+
+ if (ecc_bytes * nsteps > oobavail)
+ continue;
+
+ corr = strength * nsteps;
+
+ /*
+ * If the number of correctable bits is the same,
+ * bigger step_size has more reliability.
+ */
+ if (corr > best_corr ||
+ (corr == best_corr && step_size > best_step)) {
+ best_corr = corr;
+ best_step = step_size;
+ best_strength = strength;
+ best_ecc_bytes = ecc_bytes;
+ }
+ }
+ }
+
+ if (!best_corr)
+ return -ENOTSUPP;
+
+ chip->ecc.size = best_step;
+ chip->ecc.strength = best_strength;
+ chip->ecc.bytes = best_ecc_bytes;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nand_maximize_ecc);
+
/*
* Check if the chip configuration meet the datasheet requirements.
@@ -4733,6 +4973,18 @@ int nand_scan_tail(struct mtd_info *mtd)
}
break;
+ case NAND_ECC_ON_DIE:
+ if (!ecc->read_page || !ecc->write_page) {
+ WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
+ ret = -EINVAL;
+ goto err_free;
+ }
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ break;
+
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
@@ -4773,6 +5025,11 @@ int nand_scan_tail(struct mtd_info *mtd)
goto err_free;
}
ecc->total = ecc->steps * ecc->bytes;
+ if (ecc->total > mtd->oobsize) {
+ WARN(1, "Total number of ECC bytes exceeded oobsize\n");
+ ret = -EINVAL;
+ goto err_free;
+ }
/*
* The number of bytes available for a client to place data into
diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c
index 877011069251..c30ab60f8e1b 100644
--- a/drivers/mtd/nand/nand_micron.c
+++ b/drivers/mtd/nand/nand_micron.c
@@ -17,6 +17,12 @@
#include <linux/mtd/nand.h>
+/*
+ * Special Micron status bit that indicates when the block has been
+ * corrected by on-die ECC and should be rewritten
+ */
+#define NAND_STATUS_WRITE_RECOMMENDED BIT(3)
+
struct nand_onfi_vendor_micron {
u8 two_plane_read;
u8 read_cache;
@@ -66,9 +72,197 @@ static int micron_nand_onfi_init(struct nand_chip *chip)
return 0;
}
+static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
+ .ecc = micron_nand_on_die_ooblayout_ecc,
+ .free = micron_nand_on_die_ooblayout_free,
+};
+
+static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+
+ if (enable)
+ feature[0] |= ONFI_FEATURE_ON_DIE_ECC_EN;
+
+ return chip->onfi_set_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+}
+
+static int
+micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+ int max_bitflips = 0;
+
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ status = chip->read_byte(mtd);
+ if (status & NAND_STATUS_FAIL)
+ mtd->ecc_stats.failed++;
+ /*
+ * The internal ECC doesn't tell us the number of bitflips
+ * that have been corrected, but tells us if it recommends to
+ * rewrite the block. If it's the case, then we pretend we had
+ * a number of bitflips equal to the ECC strength, which will
+ * hint the NAND core to rewrite the block.
+ */
+ else if (status & NAND_STATUS_WRITE_RECOMMENDED)
+ max_bitflips = chip->ecc.strength;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, -1, -1);
+
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return max_bitflips;
+}
+
+static int
+micron_nand_write_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static int
+micron_nand_read_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ return 0;
+}
+
+static int
+micron_nand_write_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+enum {
+ /* The NAND flash doesn't support on-die ECC */
+ MICRON_ON_DIE_UNSUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC and it can be
+ * enabled/disabled by a set features command.
+ */
+ MICRON_ON_DIE_SUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC, and it cannot be
+ * disabled.
+ */
+ MICRON_ON_DIE_MANDATORY,
+};
+
+/*
+ * Try to detect if the NAND support on-die ECC. To do this, we enable
+ * the feature, and read back if it has been enabled as expected. We
+ * also check if it can be disabled, because some Micron NANDs do not
+ * allow disabling the on-die ECC and we don't support such NANDs for
+ * now.
+ *
+ * This function also has the side effect of disabling on-die ECC if
+ * it had been left enabled by the firmware/bootloader.
+ */
+static int micron_supports_on_die_ecc(struct nand_chip *chip)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+ int ret;
+
+ if (chip->onfi_version == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ if (chip->bits_per_cell != 1)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, true);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if ((feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, false);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if (feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN)
+ return MICRON_ON_DIE_MANDATORY;
+
+ /*
+ * Some Micron NANDs have an on-die ECC of 4/512, some other
+ * 8/512. We only support the former.
+ */
+ if (chip->onfi_params.ecc_bits != 4)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ return MICRON_ON_DIE_SUPPORTED;
+}
+
static int micron_nand_init(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ int ondie;
int ret;
ret = micron_nand_onfi_init(chip);
@@ -78,6 +272,34 @@ static int micron_nand_init(struct nand_chip *chip)
if (mtd->writesize == 2048)
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ ondie = micron_supports_on_die_ecc(chip);
+
+ if (ondie == MICRON_ON_DIE_MANDATORY) {
+ pr_err("On-die ECC forcefully enabled, not supported\n");
+ return -EINVAL;
+ }
+
+ if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
+ pr_err("On-die ECC selected but not supported\n");
+ return -EINVAL;
+ }
+
+ chip->ecc.options = NAND_ECC_CUSTOM_PAGE_ACCESS;
+ chip->ecc.bytes = 8;
+ chip->ecc.size = 512;
+ chip->ecc.strength = 4;
+ chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
+ chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
+ chip->ecc.read_page_raw =
+ micron_nand_read_page_raw_on_die_ecc;
+ chip->ecc.write_page_raw =
+ micron_nand_write_page_raw_on_die_ecc;
+
+ mtd_set_ooblayout(mtd, &micron_nand_on_die_ooblayout_ops);
+ }
+
return 0;
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index f8e463a97b9e..209170ed2b76 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -166,7 +166,11 @@ static int __init orion_nand_probe(struct platform_device *pdev)
}
}
- clk_prepare_enable(info->clk);
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to prepare clock!\n");
+ return ret;
+ }
ret = nand_scan(mtd, 1);
if (ret)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 649ba8200832..74dae4bbdac8 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1812,6 +1812,8 @@ static int alloc_nand_resource(struct platform_device *pdev)
chip->write_buf = pxa3xx_nand_write_buf;
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->cmdfunc = nand_cmdfunc;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
}
nand_hw_control_init(chip->controller);
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index 57d483ac5765..88af7145a51a 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -2008,6 +2008,8 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
chip->read_byte = qcom_nandc_read_byte;
chip->read_buf = qcom_nandc_read_buf;
chip->write_buf = qcom_nandc_write_buf;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
/*
* the bad block marker is readable only when we read the last codeword
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f0b030d44f71..9e0c849607b9 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -812,9 +812,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
return -ENODEV;
}
-static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
struct s3c2410_platform_nand *pdata = info->platform;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 442ce619b3b6..891ac7b99305 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1183,6 +1183,8 @@ static int flctl_probe(struct platform_device *pdev)
nand->read_buf = flctl_read_buf;
nand->select_chip = flctl_select_chip;
nand->cmdfunc = flctl_cmdfunc;
+ nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
if (pdata->flcmncr_val & SEL_16BIT)
nand->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 118a26fff368..d0b6f8f9f297 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1301,7 +1301,6 @@ static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd,
sunxi_nfc_hw_ecc_enable(mtd);
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
for (i = data_offs / ecc->size;
i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) {
int data_off = i * ecc->size;
@@ -1592,9 +1591,8 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
#define sunxi_nand_lookup_timing(l, p, c) \
_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
-static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nand_chip *chip = to_sunxi_nand(nand);
@@ -1707,7 +1705,7 @@ static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd,
return tRHW;
}
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
/*
@@ -1922,7 +1920,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
ecc->write_subpage = sunxi_nfc_hw_ecc_write_subpage;
ecc->read_oob_raw = nand_read_oob_std;
ecc->write_oob_raw = nand_write_oob_std;
- ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage;
return 0;
}
diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c
index 49b286c6c10f..9d40b793b1c4 100644
--- a/drivers/mtd/nand/tango_nand.c
+++ b/drivers/mtd/nand/tango_nand.c
@@ -303,7 +303,7 @@ static int tango_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const u8 *buf, int oob_required, int page)
{
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
- int err, len = mtd->writesize;
+ int err, status, len = mtd->writesize;
/* Calling tango_write_oob() would send PAGEPROG twice */
if (oob_required)
@@ -314,6 +314,10 @@ static int tango_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (err)
return err;
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return 0;
}
@@ -340,7 +344,7 @@ static void aux_write(struct nand_chip *chip, const u8 **buf, int len, int *pos)
if (!*buf) {
/* skip over "len" bytes */
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, *pos, -1);
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, *pos, -1);
} else {
tango_write_buf(mtd, *buf, len);
*buf += len;
@@ -431,9 +435,16 @@ static int tango_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
static int tango_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const u8 *buf, int oob_required, int page)
{
+ int status;
+
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
raw_write(chip, buf, chip->oob_poi);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return 0;
}
@@ -484,9 +495,8 @@ static u32 to_ticks(int kHz, int ps)
return DIV_ROUND_UP_ULL((u64)kHz * ps, NSEC_PER_SEC);
}
-static int tango_set_timings(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int tango_set_timings(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
const struct nand_sdr_timings *sdr = nand_get_sdr_timings(conf);
struct nand_chip *chip = mtd_to_nand(mtd);
@@ -498,7 +508,7 @@ static int tango_set_timings(struct mtd_info *mtd,
if (IS_ERR(sdr))
return PTR_ERR(sdr);
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
Trdy = to_ticks(kHz, sdr->tCEA_max - sdr->tREA_max);
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 3ea4bb19e12d..744ab10e8962 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -703,6 +703,8 @@ static int vf610_nfc_probe(struct platform_device *pdev)
chip->read_buf = vf610_nfc_read_buf;
chip->write_buf = vf610_nfc_write_buf;
chip->select_chip = vf610_nfc_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->options |= NAND_NO_SUBPAGE_WRITE;
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
new file mode 100644
index 000000000000..d206b3c533bc
--- /dev/null
+++ b/drivers/mtd/parsers/Kconfig
@@ -0,0 +1,8 @@
+config MTD_PARSER_TRX
+ tristate "Parser for TRX format partitions"
+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
+ help
+ TRX is a firmware format used by Broadcom on their devices. It
+ may contain up to 3/4 partitions (depending on the version).
+ This driver will parse TRX header and report at least two partitions:
+ kernel and rootfs.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
new file mode 100644
index 000000000000..4d9024e0be3b
--- /dev/null
+++ b/drivers/mtd/parsers/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
diff --git a/drivers/mtd/parsers/parser_trx.c b/drivers/mtd/parsers/parser_trx.c
new file mode 100644
index 000000000000..df360a75e1eb
--- /dev/null
+++ b/drivers/mtd/parsers/parser_trx.c
@@ -0,0 +1,126 @@
+/*
+ * Parser for TRX format partitions
+ *
+ * Copyright (C) 2012 - 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define TRX_PARSER_MAX_PARTS 4
+
+/* Magics */
+#define TRX_MAGIC 0x30524448
+#define UBI_EC_MAGIC 0x23494255 /* UBI# */
+
+struct trx_header {
+ uint32_t magic;
+ uint32_t length;
+ uint32_t crc32;
+ uint16_t flags;
+ uint16_t version;
+ uint32_t offset[3];
+} __packed;
+
+static const char *parser_trx_data_part_name(struct mtd_info *master,
+ size_t offset)
+{
+ uint32_t buf;
+ size_t bytes_read;
+ int err;
+
+ err = mtd_read(master, offset, sizeof(buf), &bytes_read,
+ (uint8_t *)&buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while parsing (offset: 0x%zX): %d\n",
+ offset, err);
+ goto out_default;
+ }
+
+ if (buf == UBI_EC_MAGIC)
+ return "ubi";
+
+out_default:
+ return "rootfs";
+}
+
+static int parser_trx_parse(struct mtd_info *mtd,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_partition *parts;
+ struct mtd_partition *part;
+ struct trx_header trx;
+ size_t bytes_read;
+ uint8_t curr_part = 0, i = 0;
+ int err;
+
+ parts = kzalloc(sizeof(struct mtd_partition) * TRX_PARSER_MAX_PARTS,
+ GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
+ err = mtd_read(mtd, 0, sizeof(trx), &bytes_read, (uint8_t *)&trx);
+ if (err) {
+ pr_err("MTD reading error: %d\n", err);
+ kfree(parts);
+ return err;
+ }
+
+ if (trx.magic != TRX_MAGIC) {
+ kfree(parts);
+ return -ENOENT;
+ }
+
+ /* We have LZMA loader if there is address in offset[2] */
+ if (trx.offset[2]) {
+ part = &parts[curr_part++];
+ part->name = "loader";
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ if (trx.offset[i]) {
+ part = &parts[curr_part++];
+ part->name = "linux";
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ if (trx.offset[i]) {
+ part = &parts[curr_part++];
+ part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ /*
+ * Assume that every partition ends at the beginning of the one it is
+ * followed by.
+ */
+ for (i = 0; i < curr_part; i++) {
+ u64 next_part_offset = (i < curr_part - 1) ?
+ parts[i + 1].offset : mtd->size;
+
+ parts[i].size = next_part_offset - parts[i].offset;
+ }
+
+ *pparts = parts;
+ return i;
+};
+
+static struct mtd_part_parser mtd_parser_trx = {
+ .parse_fn = parser_trx_parse,
+ .name = "trx",
+};
+module_mtd_part_parser(mtd_parser_trx);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Parser for TRX format partitions");
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index bfdfb1e72b38..293c8a4d1e49 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -108,7 +108,7 @@ config SPI_INTEL_SPI_PLATFORM
config SPI_STM32_QUADSPI
tristate "STM32 Quad SPI controller"
- depends on ARCH_STM32
+ depends on ARCH_STM32 || COMPILE_TEST
help
This enables support for the STM32 Quad SPI controller.
We only connect the NOR to this controller.
diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
index 56051d30f000..0106357421bd 100644
--- a/drivers/mtd/spi-nor/aspeed-smc.c
+++ b/drivers/mtd/spi-nor/aspeed-smc.c
@@ -19,6 +19,7 @@
#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/sizes.h>
#include <linux/sysfs.h>
#define DEVICE_NAME "aspeed-smc"
@@ -97,6 +98,7 @@ struct aspeed_smc_chip {
struct aspeed_smc_controller *controller;
void __iomem *ctl; /* control register */
void __iomem *ahb_base; /* base of chip window */
+ u32 ahb_window_size; /* chip mapping window size */
u32 ctl_val[smc_max]; /* control settings */
enum aspeed_smc_flash_type type; /* what type of flash */
struct spi_nor nor;
@@ -109,6 +111,7 @@ struct aspeed_smc_controller {
const struct aspeed_smc_info *info; /* type info of controller */
void __iomem *regs; /* controller registers */
void __iomem *ahb_base; /* per-chip windows resource */
+ u32 ahb_window_size; /* full mapping window size */
struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */
};
@@ -180,8 +183,7 @@ struct aspeed_smc_controller {
#define CONTROL_KEEP_MASK \
(CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
- CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \
- CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
+ CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
/*
* The Segment Register uses a 8MB unit to encode the start address
@@ -194,6 +196,10 @@ struct aspeed_smc_controller {
#define SEGMENT_ADDR_REG0 0x30
#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23)
#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23)
+#define SEGMENT_ADDR_VALUE(start, end) \
+ (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
+#define SEGMENT_ADDR_REG(controller, cs) \
+ ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
/*
* In user mode all data bytes read or written to the chip decode address
@@ -439,8 +445,7 @@ static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
u32 reg;
if (controller->info->nce > 1) {
- reg = readl(controller->regs + SEGMENT_ADDR_REG0 +
- chip->cs * 4);
+ reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
return NULL;
@@ -451,6 +456,146 @@ static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
return controller->ahb_base + offset;
}
+static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
+{
+ u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
+
+ return SEGMENT_ADDR_START(seg0_val);
+}
+
+static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
+ u32 size)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ void __iomem *seg_reg;
+ u32 seg_oldval, seg_newval, ahb_base_phy, end;
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ seg_reg = SEGMENT_ADDR_REG(controller, cs);
+ seg_oldval = readl(seg_reg);
+
+ /*
+ * If the chip size is not specified, use the default segment
+ * size, but take into account the possible overlap with the
+ * previous segment
+ */
+ if (!size)
+ size = SEGMENT_ADDR_END(seg_oldval) - start;
+
+ /*
+ * The segment cannot exceed the maximum window size of the
+ * controller.
+ */
+ if (start + size > ahb_base_phy + controller->ahb_window_size) {
+ size = ahb_base_phy + controller->ahb_window_size - start;
+ dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
+ cs, size >> 20);
+ }
+
+ end = start + size;
+ seg_newval = SEGMENT_ADDR_VALUE(start, end);
+ writel(seg_newval, seg_reg);
+
+ /*
+ * Restore default value if something goes wrong. The chip
+ * might have set some bogus value and we would loose access
+ * to the chip.
+ */
+ if (seg_newval != readl(seg_reg)) {
+ dev_err(chip->nor.dev, "CE%d window invalid", cs);
+ writel(seg_oldval, seg_reg);
+ start = SEGMENT_ADDR_START(seg_oldval);
+ end = SEGMENT_ADDR_END(seg_oldval);
+ size = end - start;
+ }
+
+ dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
+ cs, start, end, size >> 20);
+
+ return size;
+}
+
+/*
+ * The segment register defines the mapping window on the AHB bus and
+ * it needs to be configured depending on the chip size. The segment
+ * register of the following CE also needs to be tuned in order to
+ * provide a contiguous window across multiple chips.
+ *
+ * This is expected to be called in increasing CE order
+ */
+static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 ahb_base_phy, start;
+ u32 size = chip->nor.mtd.size;
+
+ /*
+ * Each controller has a chip size limit for direct memory
+ * access
+ */
+ if (size > controller->info->maxsize)
+ size = controller->info->maxsize;
+
+ /*
+ * The AST2400 SPI controller only handles one chip and does
+ * not have segment registers. Let's use the chip size for the
+ * AHB window.
+ */
+ if (controller->info == &spi_2400_info)
+ goto out;
+
+ /*
+ * The AST2500 SPI controller has a HW bug when the CE0 chip
+ * size reaches 128MB. Enforce a size limit of 120MB to
+ * prevent the controller from using bogus settings in the
+ * segment register.
+ */
+ if (chip->cs == 0 && controller->info == &spi_2500_info &&
+ size == SZ_128M) {
+ size = 120 << 20;
+ dev_info(chip->nor.dev,
+ "CE%d window resized to %dMB (AST2500 HW quirk)",
+ chip->cs, size >> 20);
+ }
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ /*
+ * As a start address for the current segment, use the default
+ * start address if we are handling CE0 or use the previous
+ * segment ending address
+ */
+ if (chip->cs) {
+ u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
+
+ start = SEGMENT_ADDR_END(prev);
+ } else {
+ start = ahb_base_phy;
+ }
+
+ size = chip_set_segment(chip, chip->cs, start, size);
+
+ /* Update chip base address on the AHB bus */
+ chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
+
+ /*
+ * Now, make sure the next segment does not overlap with the
+ * current one we just configured, even if there is no
+ * available chip. That could break access in Command Mode.
+ */
+ if (chip->cs < controller->info->nce - 1)
+ chip_set_segment(chip, chip->cs + 1, start + size, 0);
+
+out:
+ if (size < chip->nor.mtd.size)
+ dev_warn(chip->nor.dev,
+ "CE%d window too small for chip %dMB",
+ chip->cs, (u32)chip->nor.mtd.size >> 20);
+
+ return size;
+}
+
static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
{
struct aspeed_smc_controller *controller = chip->controller;
@@ -524,7 +669,7 @@ static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
*/
chip->ahb_base = aspeed_smc_chip_base(chip, res);
if (!chip->ahb_base) {
- dev_warn(chip->nor.dev, "CE segment window closed.\n");
+ dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
return -EINVAL;
}
@@ -571,6 +716,9 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
if (chip->nor.addr_width == 4 && info->set_4b)
info->set_4b(chip);
+ /* This is for direct AHB access when using Command Mode. */
+ chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
+
/*
* base mode has not been optimized yet. use it for writes.
*/
@@ -585,14 +733,12 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
* TODO: Adjust clocks if fast read is supported and interpret
* SPI-NOR flags to adjust controller settings.
*/
- switch (chip->nor.flash_read) {
- case SPI_NOR_NORMAL:
- cmd = CONTROL_COMMAND_MODE_NORMAL;
- break;
- case SPI_NOR_FAST:
- cmd = CONTROL_COMMAND_MODE_FREAD;
- break;
- default:
+ if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
+ if (chip->nor.read_dummy == 0)
+ cmd = CONTROL_COMMAND_MODE_NORMAL;
+ else
+ cmd = CONTROL_COMMAND_MODE_FREAD;
+ } else {
dev_err(chip->nor.dev, "unsupported SPI read mode\n");
return -EINVAL;
}
@@ -608,6 +754,11 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
struct device_node *np, struct resource *r)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
const struct aspeed_smc_info *info = controller->info;
struct device *dev = controller->dev;
struct device_node *child;
@@ -671,11 +822,11 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
break;
/*
- * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL
+ * TODO: Add support for Dual and Quad SPI protocols
* attach when board support is present as determined
* by of property.
*/
- ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
break;
@@ -731,6 +882,8 @@ static int aspeed_smc_probe(struct platform_device *pdev)
if (IS_ERR(controller->ahb_base))
return PTR_ERR(controller->ahb_base);
+ controller->ahb_window_size = resource_size(res);
+
ret = aspeed_smc_setup_flash(controller, np, res);
if (ret)
dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index 47937d9beec6..ba76fa8f2031 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -275,14 +275,48 @@ static void atmel_qspi_debug_command(struct atmel_qspi *aq,
static int atmel_qspi_run_command(struct atmel_qspi *aq,
const struct atmel_qspi_command *cmd,
- u32 ifr_tfrtyp, u32 ifr_width)
+ u32 ifr_tfrtyp, enum spi_nor_protocol proto)
{
u32 iar, icr, ifr, sr;
int err = 0;
iar = 0;
icr = 0;
- ifr = ifr_tfrtyp | ifr_width;
+ ifr = ifr_tfrtyp;
+
+ /* Set the SPI protocol */
+ switch (proto) {
+ case SNOR_PROTO_1_1_1:
+ ifr |= QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
+ break;
+
+ case SNOR_PROTO_1_1_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_OUTPUT;
+ break;
+
+ case SNOR_PROTO_1_1_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_OUTPUT;
+ break;
+
+ case SNOR_PROTO_1_2_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_IO;
+ break;
+
+ case SNOR_PROTO_1_4_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_IO;
+ break;
+
+ case SNOR_PROTO_2_2_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_CMD;
+ break;
+
+ case SNOR_PROTO_4_4_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_CMD;
+ break;
+
+ default:
+ return -EINVAL;
+ }
/* Compute instruction parameters */
if (cmd->enable.bits.instruction) {
@@ -434,7 +468,7 @@ static int atmel_qspi_read_reg(struct spi_nor *nor, u8 opcode,
cmd.rx_buf = buf;
cmd.buf_len = len;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode,
@@ -450,7 +484,7 @@ static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode,
cmd.tx_buf = buf;
cmd.buf_len = len;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
@@ -469,7 +503,7 @@ static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
cmd.tx_buf = write_buf;
cmd.buf_len = len;
ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->write_proto);
return (ret < 0) ? ret : len;
}
@@ -484,7 +518,7 @@ static int atmel_qspi_erase(struct spi_nor *nor, loff_t offs)
cmd.instruction = nor->erase_opcode;
cmd.address = (u32)offs;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
@@ -493,27 +527,8 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
struct atmel_qspi *aq = nor->priv;
struct atmel_qspi_command cmd;
u8 num_mode_cycles, num_dummy_cycles;
- u32 ifr_width;
ssize_t ret;
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
- ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
- break;
-
- case SPI_NOR_DUAL:
- ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT;
- break;
-
- case SPI_NOR_QUAD:
- ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT;
- break;
-
- default:
- return -EINVAL;
- }
-
if (nor->read_dummy >= 2) {
num_mode_cycles = 2;
num_dummy_cycles = nor->read_dummy - 2;
@@ -536,7 +551,7 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
cmd.rx_buf = read_buf;
cmd.buf_len = len;
ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ_MEM,
- ifr_width);
+ nor->read_proto);
return (ret < 0) ? ret : len;
}
@@ -590,6 +605,20 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
static int atmel_qspi_probe(struct platform_device *pdev)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_2_2 |
+ SNOR_HWCAPS_READ_2_2_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_READ_1_4_4 |
+ SNOR_HWCAPS_READ_4_4_4 |
+ SNOR_HWCAPS_PP |
+ SNOR_HWCAPS_PP_1_1_4 |
+ SNOR_HWCAPS_PP_1_4_4 |
+ SNOR_HWCAPS_PP_4_4_4,
+ };
struct device_node *child, *np = pdev->dev.of_node;
struct atmel_qspi *aq;
struct resource *res;
@@ -679,7 +708,7 @@ static int atmel_qspi_probe(struct platform_device *pdev)
if (err)
goto disable_clk;
- err = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ err = spi_nor_scan(nor, NULL, &hwcaps);
if (err)
goto disable_clk;
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 9f8102de1b16..53c7d8e0327a 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -855,15 +855,14 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read)
f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
if (read) {
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
break;
default:
@@ -1069,6 +1068,13 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct platform_device *pdev = cqspi->pdev;
struct device *dev = &pdev->dev;
struct cqspi_flash_pdata *f_pdata;
@@ -1123,7 +1129,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
goto err;
}
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
goto err;
@@ -1277,7 +1283,7 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
#define CQSPI_DEV_PM_OPS NULL
#endif
-static struct of_device_id const cqspi_dt_ids[] = {
+static const struct of_device_id cqspi_dt_ids[] = {
{.compatible = "cdns,qspi-nor",},
{ /* end of table */ }
};
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 1476135e0d50..f17d22435bfc 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -957,6 +957,10 @@ static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
static int fsl_qspi_probe(struct platform_device *pdev)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct fsl_qspi *q;
@@ -1065,7 +1069,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
goto mutex_failed;
diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
index a286350627a6..d1106832b9d5 100644
--- a/drivers/mtd/spi-nor/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/hisi-sfc.c
@@ -120,19 +120,24 @@ static inline int wait_op_finish(struct hifmc_host *host)
(reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
}
-static int get_if_type(enum read_mode flash_read)
+static int get_if_type(enum spi_nor_protocol proto)
{
enum hifmc_iftype if_type;
- switch (flash_read) {
- case SPI_NOR_DUAL:
+ switch (proto) {
+ case SNOR_PROTO_1_1_2:
if_type = IF_TYPE_DUAL;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_2_2:
+ if_type = IF_TYPE_DIO;
+ break;
+ case SNOR_PROTO_1_1_4:
if_type = IF_TYPE_QUAD;
break;
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ case SNOR_PROTO_1_4_4:
+ if_type = IF_TYPE_QIO;
+ break;
+ case SNOR_PROTO_1_1_1:
default:
if_type = IF_TYPE_STD;
break;
@@ -253,7 +258,10 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
reg = OP_CFG_FM_CS(priv->chipselect);
- if_type = get_if_type(nor->flash_read);
+ if (op_type == FMC_OP_READ)
+ if_type = get_if_type(nor->read_proto);
+ else
+ if_type = get_if_type(nor->write_proto);
reg |= OP_CFG_MEM_IF_TYPE(if_type);
if (op_type == FMC_OP_READ)
reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
@@ -321,6 +329,13 @@ static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to,
static int hisi_spi_nor_register(struct device_node *np,
struct hifmc_host *host)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct device *dev = host->dev;
struct spi_nor *nor;
struct hifmc_priv *priv;
@@ -362,7 +377,7 @@ static int hisi_spi_nor_register(struct device_node *np,
nor->read = hisi_spi_nor_read;
nor->write = hisi_spi_nor_write;
nor->erase = NULL;
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 986a3d020a3a..8a596bfeddff 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -715,6 +715,11 @@ static void intel_spi_fill_partition(struct intel_spi *ispi,
struct intel_spi *intel_spi_probe(struct device *dev,
struct resource *mem, const struct intel_spi_boardinfo *info)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
struct mtd_partition part;
struct intel_spi *ispi;
int ret;
@@ -746,7 +751,7 @@ struct intel_spi *intel_spi_probe(struct device *dev,
ispi->nor.write = intel_spi_write;
ispi->nor.erase = intel_spi_erase;
- ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL);
+ ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
if (ret) {
dev_info(dev, "failed to locate the chip\n");
return ERR_PTR(ret);
diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index b6377707ce32..8a20ec4991c8 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -123,20 +123,20 @@ static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
{
struct spi_nor *nor = &mt8173_nor->nor;
- switch (nor->flash_read) {
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
MTK_NOR_CFG1_REG);
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
MTK_NOR_DUAL_REG);
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA4_REG);
writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
@@ -408,6 +408,11 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
struct device_node *flash_node)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_PP,
+ };
int ret;
struct spi_nor *nor;
@@ -426,7 +431,7 @@ static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
nor->write_reg = mt8173_nor_write_reg;
nor->mtd.name = "mtk_nor";
/* initialized with NULL */
- ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
index 73a14f40928b..15374216d4d9 100644
--- a/drivers/mtd/spi-nor/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -240,13 +240,12 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
{
- switch (spifi->nor.flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (spifi->nor.read_proto) {
+ case SNOR_PROTO_1_1_1:
spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
break;
- case SPI_NOR_DUAL:
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_2:
+ case SNOR_PROTO_1_1_4:
spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
break;
default:
@@ -274,7 +273,11 @@ static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
struct device_node *np)
{
- enum read_mode flash_read;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
u32 ctrl, property;
u16 mode = 0;
int ret;
@@ -308,13 +311,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
if (mode & SPI_RX_DUAL) {
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_DUAL;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
} else if (mode & SPI_RX_QUAD) {
ctrl &= ~SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_QUAD;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
} else {
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_NORMAL;
}
switch (mode & (SPI_CPHA | SPI_CPOL)) {
@@ -351,7 +353,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
*/
nxp_spifi_dummy_id_read(&spifi->nor);
- ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
+ ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
if (ret) {
dev_err(spifi->dev, "device scan failed\n");
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index dea8c9cbadf0..1413828ff1fb 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -150,24 +150,6 @@ static int read_cr(struct spi_nor *nor)
}
/*
- * Dummy Cycle calculation for different type of read.
- * It can be used to support more commands with
- * different dummy cycle requirements.
- */
-static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
-{
- switch (nor->flash_read) {
- case SPI_NOR_FAST:
- case SPI_NOR_DUAL:
- case SPI_NOR_QUAD:
- return 8;
- case SPI_NOR_NORMAL:
- return 0;
- }
- return 0;
-}
-
-/*
* Write status register 1 byte
* Returns negative if error occurred.
*/
@@ -221,6 +203,10 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
{ SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
{ SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
{ SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
+
+ { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
+ { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
+ { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B },
};
return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
@@ -1022,10 +1008,12 @@ static const struct flash_info spi_nor_ids[] = {
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
/* Micron */
@@ -1036,7 +1024,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
@@ -1076,6 +1064,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
{ "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
{ "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
@@ -1159,7 +1148,9 @@ static const struct flash_info spi_nor_ids[] = {
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -1403,8 +1394,9 @@ static int macronix_quad_enable(struct spi_nor *nor)
write_sr(nor, val | SR_QUAD_EN_MX);
- if (spi_nor_wait_till_ready(nor))
- return 1;
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ return ret;
ret = read_sr(nor);
if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
@@ -1460,30 +1452,6 @@ static int spansion_quad_enable(struct spi_nor *nor)
return 0;
}
-static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
-{
- int status;
-
- switch (JEDEC_MFR(info)) {
- case SNOR_MFR_MACRONIX:
- status = macronix_quad_enable(nor);
- if (status) {
- dev_err(nor->dev, "Macronix quad-read not enabled\n");
- return -EINVAL;
- }
- return status;
- case SNOR_MFR_MICRON:
- return 0;
- default:
- status = spansion_quad_enable(nor);
- if (status) {
- dev_err(nor->dev, "Spansion quad-read not enabled\n");
- return -EINVAL;
- }
- return status;
- }
-}
-
static int spi_nor_check(struct spi_nor *nor)
{
if (!nor->dev || !nor->read || !nor->write ||
@@ -1536,8 +1504,349 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
return 0;
}
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
+struct spi_nor_read_command {
+ u8 num_mode_clocks;
+ u8 num_wait_states;
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+struct spi_nor_pp_command {
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+enum spi_nor_read_command_index {
+ SNOR_CMD_READ,
+ SNOR_CMD_READ_FAST,
+ SNOR_CMD_READ_1_1_1_DTR,
+
+ /* Dual SPI */
+ SNOR_CMD_READ_1_1_2,
+ SNOR_CMD_READ_1_2_2,
+ SNOR_CMD_READ_2_2_2,
+ SNOR_CMD_READ_1_2_2_DTR,
+
+ /* Quad SPI */
+ SNOR_CMD_READ_1_1_4,
+ SNOR_CMD_READ_1_4_4,
+ SNOR_CMD_READ_4_4_4,
+ SNOR_CMD_READ_1_4_4_DTR,
+
+ /* Octo SPI */
+ SNOR_CMD_READ_1_1_8,
+ SNOR_CMD_READ_1_8_8,
+ SNOR_CMD_READ_8_8_8,
+ SNOR_CMD_READ_1_8_8_DTR,
+
+ SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+ SNOR_CMD_PP,
+
+ /* Quad SPI */
+ SNOR_CMD_PP_1_1_4,
+ SNOR_CMD_PP_1_4_4,
+ SNOR_CMD_PP_4_4_4,
+
+ /* Octo SPI */
+ SNOR_CMD_PP_1_1_8,
+ SNOR_CMD_PP_1_8_8,
+ SNOR_CMD_PP_8_8_8,
+
+ SNOR_CMD_PP_MAX
+};
+
+struct spi_nor_flash_parameter {
+ u64 size;
+ u32 page_size;
+
+ struct spi_nor_hwcaps hwcaps;
+ struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
+ struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
+
+ int (*quad_enable)(struct spi_nor *nor);
+};
+
+static void
+spi_nor_set_read_settings(struct spi_nor_read_command *read,
+ u8 num_mode_clocks,
+ u8 num_wait_states,
+ u8 opcode,
+ enum spi_nor_protocol proto)
{
+ read->num_mode_clocks = num_mode_clocks;
+ read->num_wait_states = num_wait_states;
+ read->opcode = opcode;
+ read->proto = proto;
+}
+
+static void
+spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
+ u8 opcode,
+ enum spi_nor_protocol proto)
+{
+ pp->opcode = opcode;
+ pp->proto = proto;
+}
+
+static int spi_nor_init_params(struct spi_nor *nor,
+ const struct flash_info *info,
+ struct spi_nor_flash_parameter *params)
+{
+ /* Set legacy flash parameters as default. */
+ memset(params, 0, sizeof(*params));
+
+ /* Set SPI NOR sizes. */
+ params->size = info->sector_size * info->n_sectors;
+ params->page_size = info->page_size;
+
+ /* (Fast) Read settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ;
+ spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
+ 0, 0, SPINOR_OP_READ,
+ SNOR_PROTO_1_1_1);
+
+ if (!(info->flags & SPI_NOR_NO_FR)) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+ spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
+ 0, 8, SPINOR_OP_READ_FAST,
+ SNOR_PROTO_1_1_1);
+ }
+
+ if (info->flags & SPI_NOR_DUAL_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
+ 0, 8, SPINOR_OP_READ_1_1_2,
+ SNOR_PROTO_1_1_2);
+ }
+
+ if (info->flags & SPI_NOR_QUAD_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+ spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
+ 0, 8, SPINOR_OP_READ_1_1_4,
+ SNOR_PROTO_1_1_4);
+ }
+
+ /* Page Program settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_PP;
+ spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
+ SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+
+ /* Select the procedure to set the Quad Enable bit. */
+ if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
+ SNOR_HWCAPS_PP_QUAD)) {
+ switch (JEDEC_MFR(info)) {
+ case SNOR_MFR_MACRONIX:
+ params->quad_enable = macronix_quad_enable;
+ break;
+
+ case SNOR_MFR_MICRON:
+ break;
+
+ default:
+ params->quad_enable = spansion_quad_enable;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (table[i][0] == (int)hwcaps)
+ return table[i][1];
+
+ return -EINVAL;
+}
+
+static int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+{
+ static const int hwcaps_read2cmd[][2] = {
+ { SNOR_HWCAPS_READ, SNOR_CMD_READ },
+ { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST },
+ { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR },
+ { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 },
+ { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 },
+ { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 },
+ { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR },
+ { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 },
+ { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 },
+ { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 },
+ { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR },
+ { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 },
+ { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 },
+ { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 },
+ { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
+ ARRAY_SIZE(hwcaps_read2cmd));
+}
+
+static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
+{
+ static const int hwcaps_pp2cmd[][2] = {
+ { SNOR_HWCAPS_PP, SNOR_CMD_PP },
+ { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 },
+ { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 },
+ { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 },
+ { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 },
+ { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 },
+ { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
+ ARRAY_SIZE(hwcaps_pp2cmd));
+}
+
+static int spi_nor_select_read(struct spi_nor *nor,
+ const struct spi_nor_flash_parameter *params,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
+ const struct spi_nor_read_command *read;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ read = &params->reads[cmd];
+ nor->read_opcode = read->opcode;
+ nor->read_proto = read->proto;
+
+ /*
+ * In the spi-nor framework, we don't need to make the difference
+ * between mode clock cycles and wait state clock cycles.
+ * Indeed, the value of the mode clock cycles is used by a QSPI
+ * flash memory to know whether it should enter or leave its 0-4-4
+ * (Continuous Read / XIP) mode.
+ * eXecution In Place is out of the scope of the mtd sub-system.
+ * Hence we choose to merge both mode and wait state clock cycles
+ * into the so called dummy clock cycles.
+ */
+ nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
+ return 0;
+}
+
+static int spi_nor_select_pp(struct spi_nor *nor,
+ const struct spi_nor_flash_parameter *params,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
+ const struct spi_nor_pp_command *pp;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ pp = &params->page_programs[cmd];
+ nor->program_opcode = pp->opcode;
+ nor->write_proto = pp->proto;
+ return 0;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor,
+ const struct flash_info *info)
+{
+ struct mtd_info *mtd = &nor->mtd;
+
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+ if (info->flags & SECT_4K) {
+ nor->erase_opcode = SPINOR_OP_BE_4K;
+ mtd->erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+ mtd->erasesize = 4096;
+ } else
+#endif
+ {
+ nor->erase_opcode = SPINOR_OP_SE;
+ mtd->erasesize = info->sector_size;
+ }
+ return 0;
+}
+
+static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
+ const struct spi_nor_flash_parameter *params,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ u32 ignored_mask, shared_mask;
+ bool enable_quad_io;
+ int err;
+
+ /*
+ * Keep only the hardware capabilities supported by both the SPI
+ * controller and the SPI flash memory.
+ */
+ shared_mask = hwcaps->mask & params->hwcaps.mask;
+
+ /* SPI n-n-n protocols are not supported yet. */
+ ignored_mask = (SNOR_HWCAPS_READ_2_2_2 |
+ SNOR_HWCAPS_READ_4_4_4 |
+ SNOR_HWCAPS_READ_8_8_8 |
+ SNOR_HWCAPS_PP_4_4_4 |
+ SNOR_HWCAPS_PP_8_8_8);
+ if (shared_mask & ignored_mask) {
+ dev_dbg(nor->dev,
+ "SPI n-n-n protocols are not supported yet.\n");
+ shared_mask &= ~ignored_mask;
+ }
+
+ /* Select the (Fast) Read command. */
+ err = spi_nor_select_read(nor, params, shared_mask);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select read settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Page Program command. */
+ err = spi_nor_select_pp(nor, params, shared_mask);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select write settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Sector Erase command. */
+ err = spi_nor_select_erase(nor, info);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select erase settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Enable Quad I/O if needed. */
+ enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+ spi_nor_get_protocol_width(nor->write_proto) == 4);
+ if (enable_quad_io && params->quad_enable) {
+ err = params->quad_enable(nor);
+ if (err) {
+ dev_err(nor->dev, "quad mode not supported\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ struct spi_nor_flash_parameter params;
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
@@ -1549,6 +1858,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (ret)
return ret;
+ /* Reset SPI protocol for all commands. */
+ nor->reg_proto = SNOR_PROTO_1_1_1;
+ nor->read_proto = SNOR_PROTO_1_1_1;
+ nor->write_proto = SNOR_PROTO_1_1_1;
+
if (name)
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
@@ -1591,6 +1905,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (info->flags & SPI_S3AN)
nor->flags |= SNOR_F_READY_XSR_RDY;
+ /* Parse the Serial Flash Discoverable Parameters table. */
+ ret = spi_nor_init_params(nor, info, &params);
+ if (ret)
+ return ret;
+
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set
@@ -1611,7 +1930,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = info->sector_size * info->n_sectors;
+ mtd->size = params.size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
@@ -1642,75 +1961,38 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (info->flags & NO_CHIP_ERASE)
nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
- if (info->flags & SECT_4K) {
- nor->erase_opcode = SPINOR_OP_BE_4K;
- mtd->erasesize = 4096;
- } else if (info->flags & SECT_4K_PMC) {
- nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- mtd->erasesize = 4096;
- } else
-#endif
- {
- nor->erase_opcode = SPINOR_OP_SE;
- mtd->erasesize = info->sector_size;
- }
-
if (info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
- nor->page_size = info->page_size;
+ nor->page_size = params.page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
- nor->flash_read = SPI_NOR_FAST;
+ params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
else
- nor->flash_read = SPI_NOR_NORMAL;
+ params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
} else {
/* If we weren't instantiated by DT, default to fast-read */
- nor->flash_read = SPI_NOR_FAST;
+ params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
}
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
- nor->flash_read = SPI_NOR_NORMAL;
-
- /* Quad/Dual-read mode takes precedence over fast/normal */
- if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
- ret = set_quad_mode(nor, info);
- if (ret) {
- dev_err(dev, "quad mode not supported\n");
- return ret;
- }
- nor->flash_read = SPI_NOR_QUAD;
- } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
- nor->flash_read = SPI_NOR_DUAL;
- }
-
- /* Default commands */
- switch (nor->flash_read) {
- case SPI_NOR_QUAD:
- nor->read_opcode = SPINOR_OP_READ_1_1_4;
- break;
- case SPI_NOR_DUAL:
- nor->read_opcode = SPINOR_OP_READ_1_1_2;
- break;
- case SPI_NOR_FAST:
- nor->read_opcode = SPINOR_OP_READ_FAST;
- break;
- case SPI_NOR_NORMAL:
- nor->read_opcode = SPINOR_OP_READ;
- break;
- default:
- dev_err(dev, "No Read opcode defined\n");
- return -EINVAL;
- }
+ params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
- nor->program_opcode = SPINOR_OP_PP;
+ /*
+ * Configure the SPI memory:
+ * - select op codes for (Fast) Read, Page Program and Sector Erase.
+ * - set the number of dummy cycles (mode cycles + wait states).
+ * - set the SPI protocols for register and memory accesses.
+ * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
+ */
+ ret = spi_nor_setup(nor, info, &params, hwcaps);
+ if (ret)
+ return ret;
if (info->addr_width)
nor->addr_width = info->addr_width;
@@ -1732,8 +2014,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
return -EINVAL;
}
- nor->read_dummy = spi_nor_read_dummy_cycles(nor);
-
if (info->flags & SPI_S3AN) {
ret = s3an_nor_scan(info, nor);
if (ret)
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index ae45f81b8cd3..86c0931543c5 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -19,6 +19,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include <linux/sizes.h>
#define QUADSPI_CR 0x00
#define CR_EN BIT(0)
@@ -192,15 +193,15 @@ static void stm32_qspi_set_framemode(struct spi_nor *nor,
cmd->framemode = CCR_IMODE_1;
if (read) {
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ default:
+ case SNOR_PROTO_1_1_1:
dmode = CCR_DMODE_1;
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
dmode = CCR_DMODE_2;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
dmode = CCR_DMODE_4;
break;
}
@@ -375,7 +376,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
struct stm32_qspi_cmd cmd;
int err;
- dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#x\n",
+ dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n",
nor->read_opcode, buf, (u32)from, len);
memset(&cmd, 0, sizeof(cmd));
@@ -402,7 +403,7 @@ static ssize_t stm32_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
struct stm32_qspi_cmd cmd;
int err;
- dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#x\n",
+ dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#zx\n",
nor->program_opcode, buf, (u32)to, len);
memset(&cmd, 0, sizeof(cmd));
@@ -480,7 +481,12 @@ static void stm32_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
struct device_node *np)
{
- u32 width, flash_read, presc, cs_num, max_rate = 0;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+ u32 width, presc, cs_num, max_rate = 0;
struct stm32_qspi_flash *flash;
struct mtd_info *mtd;
int ret;
@@ -499,12 +505,10 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
width = 1;
if (width == 4)
- flash_read = SPI_NOR_QUAD;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
else if (width == 2)
- flash_read = SPI_NOR_DUAL;
- else if (width == 1)
- flash_read = SPI_NOR_NORMAL;
- else
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ else if (width != 1)
return -EINVAL;
flash = &qspi->flash[cs_num];
@@ -539,7 +543,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
*/
flash->fsize = FSIZE_VAL(SZ_1K);
- ret = spi_nor_scan(&flash->nor, NULL, flash_read);
+ ret = spi_nor_scan(&flash->nor, NULL, &hwcaps);
if (ret) {
dev_err(qspi->dev, "device scan failed\n");
return ret;
diff --git a/drivers/mtd/tests/subpagetest.c b/drivers/mtd/tests/subpagetest.c
index aecc6ce5a9e1..fa2519ad2435 100644
--- a/drivers/mtd/tests/subpagetest.c
+++ b/drivers/mtd/tests/subpagetest.c
@@ -102,7 +102,7 @@ static int write_eraseblock2(int ebnum)
if (unlikely(err || written != subpgsize * k)) {
pr_err("error: write failed at %#llx\n",
(long long)addr);
- if (written != subpgsize) {
+ if (written != subpgsize * k) {
pr_err(" write size: %#x\n",
subpgsize * k);
pr_err(" written: %#08zx\n",
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index e389009fca42..a4e3ae8f0c85 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -915,6 +915,8 @@ static int spinand_probe(struct spi_device *spi_nand)
chip->waitfunc = spinand_wait;
chip->options |= NAND_CACHEPRG;
chip->select_chip = spinand_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
mtd = nand_to_mtd(chip);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index de0d889e4fe1..892148c448cc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -107,6 +107,8 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
/*
* Constants for ECC_MODES
*/
@@ -116,6 +118,7 @@ typedef enum {
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_ON_DIE,
} nand_ecc_modes_t;
enum nand_ecc_algo {
@@ -257,6 +260,8 @@ struct nand_chip;
/* Vendor-specific feature address (Micron) */
#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
@@ -477,6 +482,44 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc)
}
/**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+ int stepsize;
+ const int *strengths;
+ int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+ const struct nand_ecc_step_info *stepinfos;
+ int nstepinfos;
+ int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
+static const int __name##_strengths[] = { __VA_ARGS__ }; \
+static const struct nand_ecc_step_info __name##_stepinfo = { \
+ .stepsize = __step, \
+ .strengths = __name##_strengths, \
+ .nstrengths = ARRAY_SIZE(__name##_strengths), \
+}; \
+static const struct nand_ecc_caps __name = { \
+ .stepinfos = &__name##_stepinfo, \
+ .nstepinfos = 1, \
+ .calc_ecc_bytes = __calc, \
+}
+
+/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
* @algo: ECC algorithm
@@ -815,7 +858,10 @@ struct nand_manufacturer_ops {
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -826,9 +872,6 @@ struct nand_manufacturer_ops {
* structure which is shared among multiple independent
* devices.
* @priv: [OPTIONAL] pointer to private chip data
- * @errstat: [OPTIONAL] hardware specific function to perform
- * additional error status checks (determine if errors are
- * correctable).
* @manufacturer: [INTERN] Contains manufacturer information
*/
@@ -852,16 +895,13 @@ struct nand_chip {
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
- int status, int page);
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
int chip_delay;
@@ -1244,6 +1284,15 @@ int nand_check_erased_ecc_chunk(void *data, int datalen,
void *extraoob, int extraooblen,
int threshold);
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
/* Default write_oob implementation */
int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
@@ -1258,6 +1307,19 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page);
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 06df1e06b6e0..c4beb70dacbd 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -20,6 +20,12 @@
*
* For each partition, these fields are available:
* name: string that will be used to label the partition's MTD device.
+ * types: some partitions can be containers using specific format to describe
+ * embedded subpartitions / volumes. E.g. many home routers use "firmware"
+ * partition that contains at least kernel and rootfs. In such case an
+ * extra parser is needed that will detect these dynamic partitions and
+ * report them to the MTD subsystem. If set this property stores an array
+ * of parser names to use when looking for subpartitions.
* size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
@@ -38,6 +44,7 @@
struct mtd_partition {
const char *name; /* identifier string */
+ const char *const *types; /* names of parsers to use if any */
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index f2a718030476..55faa2f07cca 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -73,6 +73,15 @@
#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
+/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */
+#define SPINOR_OP_READ_1_1_1_DTR 0x0d
+#define SPINOR_OP_READ_1_2_2_DTR 0xbd
+#define SPINOR_OP_READ_1_4_4_DTR 0xed
+
+#define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e
+#define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe
+#define SPINOR_OP_READ_1_4_4_DTR_4B 0xee
+
/* Used for SST flashes only. */
#define SPINOR_OP_BP 0x02 /* Byte program */
#define SPINOR_OP_WRDI 0x04 /* Write disable */
@@ -119,13 +128,81 @@
/* Configuration Register bits. */
#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-enum read_mode {
- SPI_NOR_NORMAL = 0,
- SPI_NOR_FAST,
- SPI_NOR_DUAL,
- SPI_NOR_QUAD,
+/* Supported SPI protocols */
+#define SNOR_PROTO_INST_MASK GENMASK(23, 16)
+#define SNOR_PROTO_INST_SHIFT 16
+#define SNOR_PROTO_INST(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_INST_SHIFT) & \
+ SNOR_PROTO_INST_MASK)
+
+#define SNOR_PROTO_ADDR_MASK GENMASK(15, 8)
+#define SNOR_PROTO_ADDR_SHIFT 8
+#define SNOR_PROTO_ADDR(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & \
+ SNOR_PROTO_ADDR_MASK)
+
+#define SNOR_PROTO_DATA_MASK GENMASK(7, 0)
+#define SNOR_PROTO_DATA_SHIFT 0
+#define SNOR_PROTO_DATA(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & \
+ SNOR_PROTO_DATA_MASK)
+
+#define SNOR_PROTO_IS_DTR BIT(24) /* Double Transfer Rate */
+
+#define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_INST(_inst_nbits) | \
+ SNOR_PROTO_ADDR(_addr_nbits) | \
+ SNOR_PROTO_DATA(_data_nbits))
+#define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_IS_DTR | \
+ SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits))
+
+enum spi_nor_protocol {
+ SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1),
+ SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2),
+ SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4),
+ SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8),
+ SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2),
+ SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4),
+ SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8),
+ SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2),
+ SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4),
+ SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8),
+
+ SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1),
+ SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2),
+ SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4),
+ SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8),
};
+static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
+{
+ return !!(proto & SNOR_PROTO_IS_DTR);
+}
+
+static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_INST_MASK)) >>
+ SNOR_PROTO_INST_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_ADDR_MASK)) >>
+ SNOR_PROTO_ADDR_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_DATA_MASK)) >>
+ SNOR_PROTO_DATA_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
+{
+ return spi_nor_get_protocol_data_nbits(proto);
+}
+
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -154,9 +231,11 @@ enum spi_nor_option_flags {
* @read_opcode: the read opcode
* @read_dummy: the dummy needed by the read operation
* @program_opcode: the program opcode
- * @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
+ * @read_proto: the SPI protocol for read operations
+ * @write_proto: the SPI protocol for write operations
+ * @reg_proto the SPI protocol for read_reg/write_reg/erase operations
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
@@ -185,7 +264,9 @@ struct spi_nor {
u8 read_opcode;
u8 read_dummy;
u8 program_opcode;
- enum read_mode flash_read;
+ enum spi_nor_protocol read_proto;
+ enum spi_nor_protocol write_proto;
+ enum spi_nor_protocol reg_proto;
bool sst_write_second;
u32 flags;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -220,10 +301,71 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
}
/**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask: the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+ u32 mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
+#define SNOR_HWCAPS_READ BIT(0)
+#define SNOR_HWCAPS_READ_FAST BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
+
+#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
+#define SNOR_HWCAPS_PP BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+
+/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
* @name: the chip type name
- * @mode: the read mode supported by the driver
+ * @hwcaps: the hardware capabilities supported by the controller driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
@@ -233,6 +375,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps);
#endif