summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 10:50:41 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 10:50:41 -0700
commit336722eb9d9732c5a497fb6299bf38cde413592b (patch)
tree3b547c3bb7ec0d6dcc8d915e6b76a4f12e2f7bff
parent5695d5d1970f975de059bb6dec76941440f62488 (diff)
parent47ac76662ca9c5852fd353093f19de3ae85f2e66 (diff)
downloadlinux-336722eb9d9732c5a497fb6299bf38cde413592b.tar.bz2
Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver pull request for 4.19-rc1. It's not all that big, just a number of small serial driver updates and fixes, along with some better vt handling for unicode characters for those using braille terminals. All of these patches have been in linux-next for a long time with no reported issues" * tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits) tty: serial: 8250: Revert NXP SC16C2552 workaround serial: 8250_exar: Read INT0 from slave device, too tty: rocket: Fix possible buffer overwrite on register_PCI serial: 8250_dw: Add ACPI support for uart on Broadcom SoC serial: 8250_dw: always set baud rate in dw8250_set_termios dt-bindings: serial: Add binding for uartlite tty: serial: uartlite: Add support for suspend and resume tty: serial: uartlite: Add clock adaptation tty: serial: uartlite: Add structure for private data serial: sh-sci: Improve support for separate TEI and DRI interrupts serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE serial: sh-sci: Allow for compressed SCIF address serial: sh-sci: Improve interrupts description serial: 8250: Use cached port name directly in messages serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup() vt: drop unused struct vt_struct vt: avoid a VLA in the unicode screen scroll function vt: add /dev/vcsu* to devices.txt vt: coherence validation code for the unicode screen buffer vt: selection: take screen contents from uniscr if available ...
-rw-r--r--Documentation/admin-guide/devices.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt23
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt2
-rw-r--r--drivers/parport/parport_serial.c9
-rw-r--r--drivers/s390/char/keyboard.c30
-rw-r--r--drivers/tty/pty.c2
-rw-r--r--drivers/tty/rocket.c2
-rw-r--r--drivers/tty/serdev/core.c48
-rw-r--r--drivers/tty/serial/8250/8250_core.c6
-rw-r--r--drivers/tty/serial/8250/8250_dw.c74
-rw-r--r--drivers/tty/serial/8250/8250_exar.c54
-rw-r--r--drivers/tty/serial/8250/8250_of.c6
-rw-r--r--drivers/tty/serial/8250/8250_omap.c1
-rw-r--r--drivers/tty/serial/8250/8250_port.c63
-rw-r--r--drivers/tty/serial/8250/serial_cs.c6
-rw-r--r--drivers/tty/serial/imx.c5
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c3
-rw-r--r--drivers/tty/serial/max310x.c14
-rw-r--r--drivers/tty/serial/pxa.c3
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c261
-rw-r--r--drivers/tty/serial/serial_core.c17
-rw-r--r--drivers/tty/serial/sh-sci.c191
-rw-r--r--drivers/tty/serial/uartlite.c112
-rw-r--r--drivers/tty/serial/xilinx_uartps.c23
-rw-r--r--drivers/tty/tty_baudrate.c22
-rw-r--r--drivers/tty/tty_io.c19
-rw-r--r--drivers/tty/tty_ldsem.c82
-rw-r--r--drivers/tty/vt/keyboard.c30
-rw-r--r--drivers/tty/vt/selection.c48
-rw-r--r--drivers/tty/vt/vc_screen.c90
-rw-r--r--drivers/tty/vt/vt.c367
-rw-r--r--include/linux/console_struct.h5
-rw-r--r--include/linux/selection.h6
-rw-r--r--include/linux/serial_8250.h3
-rw-r--r--include/linux/serial_core.h7
-rw-r--r--include/linux/tty_ldisc.h4
-rw-r--r--include/uapi/linux/keyboard.h23
44 files changed, 1381 insertions, 338 deletions
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 4ec843123cc3..1649117e6087 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -173,14 +173,18 @@
they are redirected through the parport multiplex layer.
7 char Virtual console capture devices
- 0 = /dev/vcs Current vc text contents
- 1 = /dev/vcs1 tty1 text contents
+ 0 = /dev/vcs Current vc text (glyph) contents
+ 1 = /dev/vcs1 tty1 text (glyph) contents
...
- 63 = /dev/vcs63 tty63 text contents
- 128 = /dev/vcsa Current vc text/attribute contents
- 129 = /dev/vcsa1 tty1 text/attribute contents
+ 63 = /dev/vcs63 tty63 text (glyph) contents
+ 64 = /dev/vcsu Current vc text (unicode) contents
+ 65 = /dev/vcsu1 tty1 text (unicode) contents
...
- 191 = /dev/vcsa63 tty63 text/attribute contents
+ 127 = /dev/vcsu63 tty63 text (unicode) contents
+ 128 = /dev/vcsa Current vc text/attribute (glyph) contents
+ 129 = /dev/vcsa1 tty1 text/attribute (glyph) contents
+ ...
+ 191 = /dev/vcsa63 tty63 text/attribute (glyph) contents
NOTE: These devices permit both read and write access.
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 7d21ab37c19c..48fac4ec91fc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -11,6 +11,7 @@ compatible: Must contain one of
"mediatek,mt6589"
"mediatek,mt6592"
"mediatek,mt6755"
+ "mediatek,mt6765"
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
@@ -41,6 +42,9 @@ Supported boards:
- Evaluation phone for MT6755(Helio P10):
Required root node properties:
- compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
+- Evaluation board for MT6765(Helio P22):
+ Required root node properties:
+ - compatible = "mediatek,mt6765-evb", "mediatek,mt6765";
- Evaluation board for MT6795(Helio X10):
Required root node properties:
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 6a32922a55b8..33a98eb44949 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -11,6 +11,7 @@ Required properties:
"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+ "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index afcfbc34e243..35957cbf1571 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,7 +9,11 @@ Optional properties:
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
- linux,rs485-enabled-at-boot-time: see rs485.txt
+ linux,rs485-enabled-at-boot-time: see rs485.txt. Note that for RS485
+ you must enable either the "uart-has-rtscts" or the "rts-gpios"
+ properties. In case you use "uart-has-rtscts" the signal that controls
+ the transceiver is actually CTS_B, not RTS_B. CTS_B is always output,
+ and RTS_B is input, regardless of dte-mode.
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index f73abff3de43..742cb470595b 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -8,6 +8,7 @@ Required properties:
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6755-uart" for MT6755 compatible UARTS
+ * "mediatek,mt6765-uart" for MT6765 compatible UARTS
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
* "mediatek,mt6797-uart" for MT6797 compatible UARTS
* "mediatek,mt7622-uart" for MT7622 compatible UARTS
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 4b0f05adb228..c35d5ece1156 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -1,6 +1,7 @@
OMAP UART controller
Required properties:
+- compatible : should be "ti,am654-uart" for AM654 controllers
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
diff --git a/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
new file mode 100644
index 000000000000..8b9e0d4dc2e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
@@ -0,0 +1,10 @@
+Renesas RZ/N1 UART
+
+This controller is based on the Synopsys DesignWare ABP UART and inherits all
+properties defined in snps-dw-apb-uart.txt except for the compatible property.
+
+Required properties:
+- compatible : The device specific string followed by the generic RZ/N1 string.
+ Therefore it must be one of:
+ "renesas,r9a06g032-uart", "renesas,rzn1-uart"
+ "renesas,r9a06g033-uart", "renesas,rzn1-uart"
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 106808b55b6d..eaca9da79d83 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: Must contain one or more of the following:
- "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART.
+ - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART.
- "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
- "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
- "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
@@ -72,7 +73,21 @@ Required properties:
family-specific and/or generic versions.
- reg: Base address and length of the I/O registers used by the UART.
- - interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
+ - interrupts: Must contain one or more interrupt-specifiers for the SCIx.
+ If a single interrupt is expressed, then all events are
+ multiplexed into this single interrupt.
+
+ If multiple interrupts are provided by the hardware, the order
+ in which the interrupts are listed must match order below. Note
+ that some HW interrupt events may be muxed together resulting
+ in duplicate entries.
+ The interrupt order is as follows:
+ 1. Error (ERI)
+ 2. Receive buffer full (RXI)
+ 3. Transmit buffer empty (TXI)
+ 4. Break (BRI)
+ 5. Data Ready (DRI)
+ 6. Transmit End (TEI)
- clocks: Must contain a phandle and clock-specifier pair for each entry
in clock-names.
@@ -89,7 +104,7 @@ Required properties:
- "scif_clk" for the optional external clock source for the frequency
divider (SCIF_CLK).
-Note: Each enabled SCIx UART should have an alias correctly numbered in the
+Note: Each enabled SCIx UART may have an optional "serialN" alias in the
"aliases" node.
Optional properties:
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
new file mode 100644
index 000000000000..c37deb44dead
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
@@ -0,0 +1,23 @@
+Xilinx Axi Uartlite controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible : Can be either of
+ "xlnx,xps-uartlite-1.00.a"
+ "xlnx,opb-uartlite-1.00.b"
+- reg : Physical base address and size of the Axi Uartlite
+ registers map.
+- interrupts : Should contain the UART controller interrupt.
+
+Optional properties:
+- port-number : Set Uart port number
+- clock-names : Should be "s_axi_aclk"
+- clocks : Input clock specifier. Refer to common clock bindings.
+
+Example:
+serial@800c0000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ reg = <0x0 0x800c0000 0x10000>;
+ interrupts = <0x0 0x6e 0x1>;
+ port-number = <0>;
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index 68b7d6207e3d..ff92e5a41bed 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -46,7 +46,7 @@ Child nodes should conform to I2C bus binding as described in i2c.txt.
Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
Required properties:
-- compatible: Must be "qcom,geni-debug-uart".
+- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart".
- reg: Must contain UART register location and length.
- interrupts: Must contain UART core interrupts.
- clock-names: Must contain "se".
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ae9e01ef7599..461fd8a24278 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -58,6 +58,7 @@ enum parport_pc_pci_cards {
timedia_9079c,
wch_ch353_1s1p,
wch_ch353_2s1p,
+ wch_ch382_0s1p,
wch_ch382_2s1p,
brainboxes_5s1p,
sunix_2s1p,
@@ -147,6 +148,7 @@ static struct parport_pc_pci cards[] = {
/* timedia_9079c */ { 1, { { 2, 3 }, } },
/* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
+ /* wch_ch382_0s1p*/ { 1, { { 2, -1}, } },
/* wch_ch382_2s1p*/ { 1, { { 2, -1}, } },
/* brainboxes_5s1p */ { 1, { { 3, -1 }, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
@@ -252,6 +254,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
/* WCH CARDS */
{ 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
+ { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_0s1p},
{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},
/* BrainBoxes PX272/PX306 MIO card */
@@ -494,6 +497,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.base_baud = 115200,
.uart_offset = 8,
},
+ [wch_ch382_0s1p] = {
+ .flags = FL_BASE0,
+ .num_ports = 0,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[wch_ch382_2s1p] = {
.flags = FL_BASE0,
.num_ports = 2,
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index bbb3001b0961..567aedc03c76 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -39,8 +39,34 @@ static const int kbd_max_vals[] = {
};
static const int KBD_NR_TYPES = ARRAY_SIZE(kbd_max_vals);
-static unsigned char ret_diacr[NR_DEAD] = {
- '`', '\'', '^', '~', '"', ','
+static const unsigned char ret_diacr[NR_DEAD] = {
+ '`', /* dead_grave */
+ '\'', /* dead_acute */
+ '^', /* dead_circumflex */
+ '~', /* dead_tilda */
+ '"', /* dead_diaeresis */
+ ',', /* dead_cedilla */
+ '_', /* dead_macron */
+ 'U', /* dead_breve */
+ '.', /* dead_abovedot */
+ '*', /* dead_abovering */
+ '=', /* dead_doubleacute */
+ 'c', /* dead_caron */
+ 'k', /* dead_ogonek */
+ 'i', /* dead_iota */
+ '#', /* dead_voiced_sound */
+ 'o', /* dead_semivoiced_sound */
+ '!', /* dead_belowdot */
+ '?', /* dead_hook */
+ '+', /* dead_horn */
+ '-', /* dead_stroke */
+ ')', /* dead_abovecomma */
+ '(', /* dead_abovereversedcomma */
+ ':', /* dead_doublegrave */
+ 'n', /* dead_invertedbreve */
+ ';', /* dead_belowcomma */
+ '$', /* dead_currency */
+ '@', /* dead_greek */
};
/*
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index b0e2c4847a5d..678406e0948b 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -625,7 +625,7 @@ int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags)
if (tty->driver != ptm_driver)
return -EIO;
- fd = get_unused_fd_flags(0);
+ fd = get_unused_fd_flags(flags);
if (fd < 0) {
retval = fd;
goto err;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index bdd17d2aaafd..b121d8f8f3d7 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1881,7 +1881,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
ByteIO_t UPCIRingInd = 0;
if (!dev || !pci_match_id(rocket_pci_ids, dev) ||
- pci_enable_device(dev))
+ pci_enable_device(dev) || i >= NUM_BOARDS)
return 0;
rcktpt_io_addr[i] = pci_resource_start(dev, 0);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 9e59f4788589..9db93f500b4e 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -13,6 +13,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
#include <linux/serdev.h>
#include <linux/slab.h>
@@ -143,11 +145,28 @@ EXPORT_SYMBOL_GPL(serdev_device_remove);
int serdev_device_open(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
+ int ret;
if (!ctrl || !ctrl->ops->open)
return -EINVAL;
- return ctrl->ops->open(ctrl);
+ ret = ctrl->ops->open(ctrl);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_get_sync(&ctrl->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&ctrl->dev);
+ goto err_close;
+ }
+
+ return 0;
+
+err_close:
+ if (ctrl->ops->close)
+ ctrl->ops->close(ctrl);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(serdev_device_open);
@@ -158,6 +177,8 @@ void serdev_device_close(struct serdev_device *serdev)
if (!ctrl || !ctrl->ops->close)
return;
+ pm_runtime_put(&ctrl->dev);
+
ctrl->ops->close(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_close);
@@ -330,8 +351,17 @@ EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
static int serdev_drv_probe(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
+ int ret;
+
+ ret = dev_pm_domain_attach(dev, true);
+ if (ret)
+ return ret;
+
+ ret = sdrv->probe(to_serdev_device(dev));
+ if (ret)
+ dev_pm_domain_detach(dev, true);
- return sdrv->probe(to_serdev_device(dev));
+ return ret;
}
static int serdev_drv_remove(struct device *dev)
@@ -339,6 +369,9 @@ static int serdev_drv_remove(struct device *dev)
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
if (sdrv->remove)
sdrv->remove(to_serdev_device(dev));
+
+ dev_pm_domain_detach(dev, true);
+
return 0;
}
@@ -416,6 +449,9 @@ struct serdev_controller *serdev_controller_alloc(struct device *parent,
dev_set_name(&ctrl->dev, "serial%d", id);
+ pm_runtime_no_callbacks(&ctrl->dev);
+ pm_suspend_ignore_children(&ctrl->dev, true);
+
dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
return ctrl;
@@ -547,20 +583,23 @@ int serdev_controller_add(struct serdev_controller *ctrl)
if (ret)
return ret;
+ pm_runtime_enable(&ctrl->dev);
+
ret_of = of_serdev_register_devices(ctrl);
ret_acpi = acpi_serdev_register_devices(ctrl);
if (ret_of && ret_acpi) {
dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n",
ret_of, ret_acpi);
ret = -ENODEV;
- goto out_dev_del;
+ goto err_rpm_disable;
}
dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
ctrl->nr, &ctrl->dev);
return 0;
-out_dev_del:
+err_rpm_disable:
+ pm_runtime_disable(&ctrl->dev);
device_del(&ctrl->dev);
return ret;
};
@@ -591,6 +630,7 @@ void serdev_controller_remove(struct serdev_controller *ctrl)
dummy = device_for_each_child(&ctrl->dev, NULL,
serdev_remove_device);
+ pm_runtime_disable(&ctrl->dev);
device_del(&ctrl->dev);
}
EXPORT_SYMBOL_GPL(serdev_controller_remove);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 9342fc2ee7df..8fe3d0ed229e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -323,7 +323,7 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
* the port is opened so this value needs to be preserved.
*/
if (up->bugs & UART_BUG_THRE) {
- pr_debug("ttyS%d - using backup timer\n", serial_index(port));
+ pr_debug("%s - using backup timer\n", port->name);
up->timer.function = serial8250_backup_timeout;
mod_timer(&up->timer, jiffies +
@@ -1023,6 +1023,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.get_mctrl = up->port.get_mctrl;
if (up->port.set_mctrl)
uart->port.set_mctrl = up->port.set_mctrl;
+ if (up->port.get_divisor)
+ uart->port.get_divisor = up->port.get_divisor;
+ if (up->port.set_divisor)
+ uart->port.set_divisor = up->port.set_divisor;
if (up->port.startup)
uart->port.startup = up->port.startup;
if (up->port.shutdown)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index aff04f1de3a5..fa8dcb470640 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -31,6 +31,7 @@
/* Offsets for the DesignWare specific registers */
#define DW_UART_USR 0x1f /* UART Status Register */
+#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */
#define DW_UART_CPR 0xf4 /* Component Parameter Register */
#define DW_UART_UCV 0xf8 /* UART Component Version */
@@ -55,6 +56,7 @@
struct dw8250_data {
u8 usr_reg;
+ u8 dlf_size;
int line;
int msr_mask_on;
int msr_mask_off;
@@ -67,6 +69,21 @@ struct dw8250_data {
unsigned int uart_16550_compatible:1;
};
+static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
+{
+ if (p->iotype == UPIO_MEM32BE)
+ return ioread32be(p->membase + offset);
+ return readl(p->membase + offset);
+}
+
+static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
+{
+ if (p->iotype == UPIO_MEM32BE)
+ iowrite32be(reg, p->membase + offset);
+ else
+ writel(reg, p->membase + offset);
+}
+
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
@@ -293,7 +310,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
long rate;
int ret;
- if (IS_ERR(d->clk) || !old)
+ if (IS_ERR(d->clk))
goto out;
clk_disable_unprepare(d->clk);
@@ -351,6 +368,37 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
return param == chan->device->dev->parent;
}
+/*
+ * divisor = div(I) + div(F)
+ * "I" means integer, "F" means fractional
+ * quot = div(I) = clk / (16 * baud)
+ * frac = div(F) * 2^dlf_size
+ *
+ * let rem = clk % (16 * baud)
+ * we have: div(F) * (16 * baud) = rem
+ * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
+ */
+static unsigned int dw8250_get_divisor(struct uart_port *p,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ unsigned int quot, rem, base_baud = baud * 16;
+ struct dw8250_data *d = p->private_data;
+
+ quot = p->uartclk / base_baud;
+ rem = p->uartclk % base_baud;
+ *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
+
+ return quot;
+}
+
+static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
+{
+ dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
+ serial8250_do_set_divisor(p, baud, quot, quot_frac);
+}
+
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
if (p->dev->of_node) {
@@ -404,20 +452,26 @@ static void dw8250_setup_port(struct uart_port *p)
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
- if (p->iotype == UPIO_MEM32BE)
- reg = ioread32be(p->membase + DW_UART_UCV);
- else
- reg = readl(p->membase + DW_UART_UCV);
+ reg = dw8250_readl_ext(p, DW_UART_UCV);
if (!reg)
return;
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
- if (p->iotype == UPIO_MEM32BE)
- reg = ioread32be(p->membase + DW_UART_CPR);
- else
- reg = readl(p->membase + DW_UART_CPR);
+ dw8250_writel_ext(p, DW_UART_DLF, ~0U);
+ reg = dw8250_readl_ext(p, DW_UART_DLF);
+ dw8250_writel_ext(p, DW_UART_DLF, 0);
+
+ if (reg) {
+ struct dw8250_data *d = p->private_data;
+
+ d->dlf_size = fls(reg);
+ p->get_divisor = dw8250_get_divisor;
+ p->set_divisor = dw8250_set_divisor;
+ }
+
+ reg = dw8250_readl_ext(p, DW_UART_CPR);
if (!reg)
return;
@@ -693,6 +747,7 @@ static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ .compatible = "cavium,octeon-3860-uart" },
{ .compatible = "marvell,armada-38x-uart" },
+ { .compatible = "renesas,rzn1-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
@@ -707,6 +762,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
{ "APMC0D08", 0},
{ "AMD0020", 0 },
{ "AMDI0020", 0 },
+ { "BRCM2032", 0 },
{ "HISI0031", 0 },
{ },
};
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 38af306ca0e8..0089aa305ef9 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -109,11 +109,12 @@ struct exar8250_platform {
* struct exar8250_board - board information
* @num_ports: number of serial ports
* @reg_shift: describes UART register mapping in PCI memory
+ * @setup: quirk run at ->probe() stage
+ * @exit: quirk run at ->remove() stage
*/
struct exar8250_board {
unsigned int num_ports;
unsigned int reg_shift;
- bool has_slave;
int (*setup)(struct exar8250 *, struct pci_dev *,
struct uart_8250_port *, int);
void (*exit)(struct pci_dev *pcidev);
@@ -272,8 +273,32 @@ static int xr17v35x_register_gpio(struct pci_dev *pcidev,
return 0;
}
+static int generic_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
+ u8 __iomem *p = port->membase;
+ u8 value;
+
+ value = readb(p + UART_EXAR_FCTR);
+ if (is_rs485)
+ value |= UART_FCTR_EXAR_485;
+ else
+ value &= ~UART_FCTR_EXAR_485;
+
+ writeb(value, p + UART_EXAR_FCTR);
+
+ if (is_rs485)
+ writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
+
+ port->rs485 = *rs485;
+
+ return 0;
+}
+
static const struct exar8250_platform exar8250_default_platform = {
.register_gpio = xr17v35x_register_gpio,
+ .rs485_config = generic_rs485_config,
};
static int iot2040_rs485_config(struct uart_port *port,
@@ -306,19 +331,7 @@ static int iot2040_rs485_config(struct uart_port *port,
value |= mode;
writeb(value, p + UART_EXAR_MPIOLVL_7_0);
- value = readb(p + UART_EXAR_FCTR);
- if (is_rs485)
- value |= UART_FCTR_EXAR_485;
- else
- value &= ~UART_FCTR_EXAR_485;
- writeb(value, p + UART_EXAR_FCTR);
-
- if (is_rs485)
- writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
-
- port->rs485 = *rs485;
-
- return 0;
+ return generic_rs485_config(port, rs485);
}
static const struct property_entry iot2040_gpio_properties[] = {
@@ -364,7 +377,6 @@ static int
pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port, int idx)
{
- const struct exar8250_board *board = priv->board;
const struct exar8250_platform *platform;
const struct dmi_system_id *dmi_match;
unsigned int offset = idx * 0x400;
@@ -382,10 +394,10 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
port->port.rs485_config = platform->rs485_config;
/*
- * Setup the uart clock for the devices on expansion slot to
+ * Setup the UART clock for the devices on expansion slot to
* half the clock speed of the main chip (which is 125MHz)
*/
- if (board->has_slave && idx >= 8)
+ if (idx >= 8)
port->port.uartclk /= 2;
ret = default_setup(priv, pcidev, idx, offset, port);
@@ -433,7 +445,11 @@ static irqreturn_t exar_misc_handler(int irq, void *data)
struct exar8250 *priv = data;
/* Clear all PCI interrupts by reading INT0. No effect on IIR */
- ioread8(priv->virt + UART_EXAR_INT0);
+ readb(priv->virt + UART_EXAR_INT0);
+
+ /* Clear INT0 for Expansion Interface slave ports, too */
+ if (priv->board->num_ports > 8)
+ readb(priv->virt + 0x2000 + UART_EXAR_INT0);
return IRQ_HANDLED;
}
@@ -590,14 +606,12 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
- .has_slave = true,
.setup = pci_xr17v35x_setup,
.exit = pci_xr17v35x_exit,
};
static const struct exar8250_board pbn_exar_XR17V8358 = {
.num_ports = 16,
- .has_slave = true,
.setup = pci_xr17v35x_setup,
.exit = pci_xr17v35x_exit,
};
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index bfb37f0be22f..af8beefe9b5c 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -124,7 +124,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
prop);
ret = -EINVAL;
- goto err_dispose;
+ goto err_unprepare;
}
}
port->flags |= UPF_IOREMAP;
@@ -144,6 +144,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->line = ret;
port->irq = irq_of_parse_and_map(np, 0);
+ if (!port->irq) {
+ ret = -EPROBE_DEFER;
+ goto err_unprepare;
+ }
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 1b337fee07ed..a019286f8bb6 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1115,6 +1115,7 @@ static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
static const struct of_device_id omap8250_dt_ids[] = {
+ { .compatible = "ti,am654-uart" },
{ .compatible = "ti,omap2-uart" },
{ .compatible = "ti,omap3-uart" },
{ .compatible = "ti,omap4-uart", .data = &omap4_habit, },
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index cf541aab2bd0..3f779d25ec0c 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -90,8 +90,7 @@ static const struct serial8250_config uart_config[] = {
.name = "16550A",
.fifo_size = 16,
.tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO,
},
@@ -1211,8 +1210,8 @@ static void autoconfig(struct uart_8250_port *up)
if (!port->iobase && !port->mapbase && !port->membase)
return;
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
- serial_index(port), port->iobase, port->membase);
+ DEBUG_AUTOCONF("%s: autoconf (0x%04lx, 0x%p): ",
+ port->name, port->iobase, port->membase);
/*
* We really do need global IRQs disabled here - we're going to
@@ -1363,9 +1362,8 @@ out_lock:
fintek_8250_probe(up);
if (up->capabilities != old_capabilities) {
- pr_warn("ttyS%d: detected caps %08x should be %08x\n",
- serial_index(port), old_capabilities,
- up->capabilities);
+ pr_warn("%s: detected caps %08x should be %08x\n",
+ port->name, old_capabilities, up->capabilities);
}
out:
DEBUG_AUTOCONF("iir=%d ", scratch);
@@ -2212,8 +2210,7 @@ int serial8250_do_startup(struct uart_port *port)
*/
if (!(port->flags & UPF_BUGGY_UART) &&
(serial_port_in(port, UART_LSR) == 0xff)) {
- printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
- serial_index(port));
+ pr_info_ratelimited("%s: LSR safety check engaged!\n", port->name);
retval = -ENODEV;
goto out;
}
@@ -2245,8 +2242,8 @@ int serial8250_do_startup(struct uart_port *port)
(port->type == PORT_ALTR_16550_F128)) && (port->fifosize > 1)) {
/* Bounds checking of TX threshold (valid 0 to fifosize-2) */
if ((up->tx_loadsz < 2) || (up->tx_loadsz > port->fifosize)) {
- pr_err("ttyS%d TX FIFO Threshold errors, skipping\n",
- serial_index(port));
+ pr_err("%s TX FIFO Threshold errors, skipping\n",
+ port->name);
} else {
serial_port_out(port, UART_ALTR_AFR,
UART_ALTR_EN_TXFIFO_LW);
@@ -2343,8 +2340,8 @@ int serial8250_do_startup(struct uart_port *port)
if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
if (!(up->bugs & UART_BUG_TXEN)) {
up->bugs |= UART_BUG_TXEN;
- pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- serial_index(port));
+ pr_debug("%s - enabling bad tx status workarounds\n",
+ port->name);
}
} else {
up->bugs &= ~UART_BUG_TXEN;
@@ -2373,8 +2370,8 @@ dont_test_tx_en:
if (up->dma) {
retval = serial8250_request_dma(up);
if (retval) {
- pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
- serial_index(port));
+ pr_warn_ratelimited("%s - failed to request DMA\n",
+ port->name);
up->dma = NULL;
}
}
@@ -2498,11 +2495,11 @@ static unsigned int npcm_get_divisor(struct uart_8250_port *up,
return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
}
-static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
- unsigned int baud,
- unsigned int *frac)
+static unsigned int serial8250_do_get_divisor(struct uart_port *port,
+ unsigned int baud,
+ unsigned int *frac)
{
- struct uart_port *port = &up->port;
+ struct uart_8250_port *up = up_to_u8250p(port);
unsigned int quot;
/*
@@ -2532,6 +2529,16 @@ static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
return quot;
}
+static unsigned int serial8250_get_divisor(struct uart_port *port,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ if (port->get_divisor)
+ return port->get_divisor(port, baud, frac);
+
+ return serial8250_do_get_divisor(port, baud, frac);
+}
+
static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
tcflag_t c_cflag)
{
@@ -2570,8 +2577,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
return cval;
}
-static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
- unsigned int quot, unsigned int quot_frac)
+void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
{
struct uart_8250_port *up = up_to_u8250p(port);
@@ -2602,6 +2609,16 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_port_out(port, 0x2, quot_frac);
}
}
+EXPORT_SYMBOL_GPL(serial8250_do_set_divisor);
+
+static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
+{
+ if (port->set_divisor)
+ port->set_divisor(port, baud, quot, quot_frac);
+ else
+ serial8250_do_set_divisor(port, baud, quot, quot_frac);
+}
static unsigned int serial8250_get_baud_rate(struct uart_port *port,
struct ktermios *termios,
@@ -2636,7 +2653,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
cval = serial8250_compute_lcr(up, termios->c_cflag);
baud = serial8250_get_baud_rate(port, termios, old);
- quot = serial8250_get_divisor(up, baud, &frac);
+ quot = serial8250_get_divisor(port, baud, &frac);
/*
* Ok, we're now changing the port state. Do it with
@@ -3197,7 +3214,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
termios.c_cflag = port->state->port.tty->termios.c_cflag;
baud = serial8250_get_baud_rate(port, &termios, NULL);
- quot = serial8250_get_divisor(up, baud, &frac);
+ quot = serial8250_get_divisor(port, baud, &frac);
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 9963a766dcfb..c8186a05a453 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -638,8 +638,10 @@ static int serial_config(struct pcmcia_device *link)
(link->has_func_id) &&
(link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
- (link->func_id == CISTPL_FUNCID_SERIAL)))
- pcmcia_loop_config(link, serial_check_for_multi, info);
+ (link->func_id == CISTPL_FUNCID_SERIAL))) {
+ if (pcmcia_loop_config(link, serial_check_for_multi, info))
+ goto failed;
+ }
/*
* Apply any multi-port quirk.
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4e853570ea80..239c0fa2e981 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -314,7 +314,8 @@ static u32 imx_uart_readl(struct imx_port *sport, u32 offset)
/*
* UCR2_SRST is the only bit in the cached registers that might
* differ from the value that was last written. As it only
- * clears after being set, reread conditionally.
+ * automatically becomes one after being cleared, reread
+ * conditionally.
*/
if (!(sport->ucr2 & UCR2_SRST))
sport->ucr2 = readl(sport->port.membase + offset);
@@ -1051,7 +1052,7 @@ static void imx_uart_dma_rx_callback(void *data)
unsigned int r_bytes;
unsigned int bd_size;
- status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
+ status = dmaengine_tx_status(chan, sport->rx_cookie, &state);
if (status == DMA_ERROR) {
imx_uart_clear_rx_errors(sport);
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index b6bd6e15e07b..689774c073ca 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -430,7 +430,6 @@ int jsm_uart_port_init(struct jsm_board *brd)
{
int i, rc;
unsigned int line;
- struct jsm_channel *ch;
if (!brd)
return -ENXIO;
@@ -444,7 +443,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
brd->nasync = brd->maxports;
/* Set up channel variables */
- for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+ for (i = 0; i < brd->nasync; i++) {
if (!brd->channels[i])
continue;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index efe55a1a0615..3db48fcd6068 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -531,8 +531,8 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
return 1;
}
-static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
- bool xtal)
+static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+ unsigned long freq, bool xtal)
{
unsigned int div, clksrc, pllcfg = 0;
long besterr = -1;
@@ -588,8 +588,14 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
/* Wait for crystal */
- if (pllcfg && xtal)
+ if (xtal) {
+ unsigned int val;
msleep(10);
+ regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+ if (!(val & MAX310X_STS_CLKREADY_BIT)) {
+ dev_warn(dev, "clock is not stable yet\n");
+ }
+ }
return (int)bestfreq;
}
@@ -1260,7 +1266,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
MAX310X_MODE1_AUTOSLEEP_BIT);
}
- uartclk = max310x_set_ref_clk(s, freq, xtal);
+ uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
mutex_init(&s->mutex);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index eda3c7710d6a..4932b674f7ef 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -887,7 +887,8 @@ static int serial_pxa_probe(struct platform_device *dev)
goto err_clk;
if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) {
dev_err(&dev->dev, "serial%d out of range\n", sport->port.line);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_clk;
}
snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index c62e17c85f57..29ec34387246 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -17,6 +17,7 @@
#include <linux/tty_flip.h>
/* UART specific GENI registers */
+#define SE_UART_LOOPBACK_CFG 0x22c
#define SE_UART_TX_TRANS_CFG 0x25c
#define SE_UART_TX_WORD_LEN 0x268
#define SE_UART_TX_STOP_BIT_LEN 0x26c
@@ -26,6 +27,7 @@
#define SE_UART_RX_STALE_CNT 0x294
#define SE_UART_TX_PARITY_CFG 0x2a4
#define SE_UART_RX_PARITY_CFG 0x2a8
+#define SE_UART_MANUAL_RFR 0x2ac
/* SE_UART_TRANS_CFG */
#define UART_TX_PAR_EN BIT(0)
@@ -62,6 +64,11 @@
#define PAR_SPACE 0x10
#define PAR_MARK 0x11
+/* SE_UART_MANUAL_RFR register fields */
+#define UART_MANUAL_RFR_EN BIT(31)
+#define UART_RFR_NOT_READY BIT(1)
+#define UART_RFR_READY BIT(0)
+
/* UART M_CMD OP codes */
#define UART_START_TX 0x1
#define UART_START_BREAK 0x4
@@ -74,10 +81,12 @@
#define STALE_TIMEOUT 16
#define DEFAULT_BITS_PER_CHAR 10
#define GENI_UART_CONS_PORTS 1
+#define GENI_UART_PORTS 3
#define DEF_FIFO_DEPTH_WORDS 16
#define DEF_TX_WM 2
#define DEF_FIFO_WIDTH_BITS 32
#define UART_CONSOLE_RX_WM 2
+#define MAX_LOOPBACK_CFG 3
#ifdef CONFIG_CONSOLE_POLL
#define RX_BYTES_PW 1
@@ -101,22 +110,81 @@ struct qcom_geni_serial_port {
unsigned int baud;
unsigned int tx_bytes_pw;
unsigned int rx_bytes_pw;
+ u32 *rx_fifo;
+ u32 loopback;
bool brk;
};
static const struct uart_ops qcom_geni_console_pops;
+static const struct uart_ops qcom_geni_uart_pops;
static struct uart_driver qcom_geni_console_driver;
+static struct uart_driver qcom_geni_uart_driver;
static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
+static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
static void qcom_geni_serial_stop_rx(struct uart_port *uport);
static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
32000000, 48000000, 64000000, 80000000,
- 96000000, 100000000};
+ 96000000, 100000000, 102400000,
+ 112000000, 120000000, 128000000};
#define to_dev_port(ptr, member) \
container_of(ptr, struct qcom_geni_serial_port, member)
+static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
+ [0] = {
+ .uport = {
+ .iotype = UPIO_MEM,
+ .ops = &qcom_geni_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ [1] = {
+ .uport = {
+ .iotype = UPIO_MEM,
+ .ops = &qcom_geni_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+ [2] = {
+ .uport = {
+ .iotype = UPIO_MEM,
+ .ops = &qcom_geni_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ },
+};
+
+static ssize_t loopback_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+
+ return snprintf(buf, sizeof(u32), "%d\n", port->loopback);
+}
+
+static ssize_t loopback_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+ u32 loopback;
+
+ if (kstrtoint(buf, 0, &loopback) || loopback > MAX_LOOPBACK_CFG) {
+ dev_err(dev, "Invalid input\n");
+ return -EINVAL;
+ }
+ port->loopback = loopback;
+ return size;
+}
+static DEVICE_ATTR_RW(loopback);
+
static struct qcom_geni_serial_port qcom_geni_console_port = {
.uport = {
.iotype = UPIO_MEM,
@@ -148,14 +216,33 @@ static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags)
}
}
-static unsigned int qcom_geni_cons_get_mctrl(struct uart_port *uport)
+static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport)
{
- return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+ unsigned int mctrl = TIOCM_DSR | TIOCM_CAR;
+ u32 geni_ios;
+
+ if (uart_console(uport) || !uart_cts_enabled(uport)) {
+ mctrl |= TIOCM_CTS;
+ } else {
+ geni_ios = readl_relaxed(uport->membase + SE_GENI_IOS);
+ if (!(geni_ios & IO2_DATA_IN))
+ mctrl |= TIOCM_CTS;
+ }
+
+ return mctrl;
}
-static void qcom_geni_cons_set_mctrl(struct uart_port *uport,
+static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
unsigned int mctrl)
{
+ u32 uart_manual_rfr = 0;
+
+ if (uart_console(uport) || !uart_cts_enabled(uport))
+ return;
+
+ if (!(mctrl & TIOCM_RTS))
+ uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY;
+ writel_relaxed(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
}
static const char *qcom_geni_serial_get_type(struct uart_port *uport)
@@ -163,11 +250,16 @@ static const char *qcom_geni_serial_get_type(struct uart_port *uport)
return "MSM";
}
-static struct qcom_geni_serial_port *get_port_from_line(int line)
+static struct qcom_geni_serial_port *get_port_from_line(int line, bool console)
{
- if (line < 0 || line >= GENI_UART_CONS_PORTS)
+ struct qcom_geni_serial_port *port;
+ int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS;
+
+ if (line < 0 || line >= nr_ports)
return ERR_PTR(-ENXIO);
- return &qcom_geni_console_port;
+
+ port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line];
+ return port;
}
static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
@@ -346,7 +438,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS);
- port = get_port_from_line(co->index);
+ port = get_port_from_line(co->index, true);
if (IS_ERR(port))
return;
@@ -420,6 +512,32 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */
+static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
+{
+ unsigned char *buf;
+ struct tty_port *tport;
+ struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+ u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE;
+ u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw;
+ int ret;
+
+ tport = &uport->state->port;
+ ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words);
+ if (drop)
+ return 0;
+
+ buf = (unsigned char *)port->rx_fifo;
+ ret = tty_insert_flip_string(tport, buf, bytes);
+ if (ret != bytes) {
+ dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n",
+ __func__, ret, bytes);
+ WARN_ON_ONCE(1);
+ }
+ uport->icount.rx += ret;
+ tty_flip_buffer_push(tport);
+ return ret;
+}
+
static void qcom_geni_serial_start_tx(struct uart_port *uport)
{
u32 irq_en;
@@ -586,6 +704,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
u32 status;
unsigned int chunk;
int tail;
+ u32 irq_en;
chunk = uart_circ_chars_pending(xmit);
status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
@@ -595,6 +714,13 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
goto out_write_wakeup;
}
+ if (!uart_console(uport)) {
+ irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en &= ~(M_TX_FIFO_WATERMARK_EN);
+ writel_relaxed(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
+ writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+ }
+
avail = (port->tx_fifo_depth - port->tx_wm) * port->tx_bytes_pw;
tail = xmit->tail;
chunk = min3((size_t)chunk, (size_t)(UART_XMIT_SIZE - tail), avail);
@@ -623,7 +749,8 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
}
xmit->tail = tail & (UART_XMIT_SIZE - 1);
- qcom_geni_serial_poll_tx_done(uport);
+ if (uart_console(uport))
+ qcom_geni_serial_poll_tx_done(uport);
out_write_wakeup:
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(uport);
@@ -710,7 +837,8 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
unsigned long flags;
/* Stop the console before stopping the current tx */
- console_stop(uport->cons);
+ if (uart_console(uport))
+ console_stop(uport->cons);
free_irq(uport->irq, uport);
spin_lock_irqsave(&uport->lock, flags);
@@ -731,13 +859,20 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
* it else we could end up in data loss scenarios.
*/
port->xfer_mode = GENI_SE_FIFO;
- qcom_geni_serial_poll_tx_done(uport);
+ if (uart_console(uport))
+ qcom_geni_serial_poll_tx_done(uport);
geni_se_config_packing(&port->se, BITS_PER_BYTE, port->tx_bytes_pw,
false, true, false);
geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw,
false, false, true);
geni_se_init(&port->se, port->rx_wm, port->rx_rfr);
geni_se_select_mode(&port->se, port->xfer_mode);
+ if (!uart_console(uport)) {
+ port->rx_fifo = devm_kzalloc(uport->dev,
+ port->rx_fifo_depth * sizeof(u32), GFP_KERNEL);
+ if (!port->rx_fifo)
+ return -ENOMEM;
+ }
port->setup = true;
return 0;
}
@@ -749,8 +884,13 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
scnprintf(port->name, sizeof(port->name),
- "qcom_serial_geni%d", uport->line);
+ "qcom_serial_%s%d",
+ (uart_console(uport) ? "console" : "uart"), uport->line);
+ if (!uart_console(uport)) {
+ port->tx_bytes_pw = 4;
+ port->rx_bytes_pw = RX_BYTES_PW;
+ }
proto = geni_se_read_proto(&port->se);
if (proto != GENI_SE_UART) {
dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
@@ -886,6 +1026,9 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
if (baud)
uart_update_timeout(uport, termios->c_cflag, baud);
+ if (!uart_console(uport))
+ writel_relaxed(port->loopback,
+ uport->membase + SE_UART_LOOPBACK_CFG);
writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
@@ -917,7 +1060,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
if (co->index >= GENI_UART_CONS_PORTS || co->index < 0)
return -ENXIO;
- port = get_port_from_line(co->index);
+ port = get_port_from_line(co->index, true);
if (IS_ERR(port)) {
pr_err("Invalid line %d\n", co->index);
return PTR_ERR(port);
@@ -1048,16 +1191,23 @@ static void console_unregister(struct uart_driver *drv)
}
#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */
-static void qcom_geni_serial_cons_pm(struct uart_port *uport,
+static struct uart_driver qcom_geni_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "qcom_geni_uart",
+ .dev_name = "ttyHS",
+ .nr = GENI_UART_PORTS,
+};
+
+static void qcom_geni_serial_pm(struct uart_port *uport,
unsigned int new_state, unsigned int old_state)
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- if (unlikely(!uart_console(uport)))
- return;
-
if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF)
geni_se_resources_on(&port->se);
+ else if (!uart_console(uport) && (new_state == UART_PM_STATE_ON &&
+ old_state == UART_PM_STATE_UNDEFINED))
+ geni_se_resources_on(&port->se);
else if (new_state == UART_PM_STATE_OFF &&
old_state == UART_PM_STATE_ON)
geni_se_resources_off(&port->se);
@@ -1074,13 +1224,29 @@ static const struct uart_ops qcom_geni_console_pops = {
.config_port = qcom_geni_serial_config_port,
.shutdown = qcom_geni_serial_shutdown,
.type = qcom_geni_serial_get_type,
- .set_mctrl = qcom_geni_cons_set_mctrl,
- .get_mctrl = qcom_geni_cons_get_mctrl,
+ .set_mctrl = qcom_geni_serial_set_mctrl,
+ .get_mctrl = qcom_geni_serial_get_mctrl,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = qcom_geni_serial_get_char,
.poll_put_char = qcom_geni_serial_poll_put_char,
#endif
- .pm = qcom_geni_serial_cons_pm,
+ .pm = qcom_geni_serial_pm,
+};
+
+static const struct uart_ops qcom_geni_uart_pops = {
+ .tx_empty = qcom_geni_serial_tx_empty,
+ .stop_tx = qcom_geni_serial_stop_tx,
+ .start_tx = qcom_geni_serial_start_tx,
+ .stop_rx = qcom_geni_serial_stop_rx,
+ .set_termios = qcom_geni_serial_set_termios,
+ .startup = qcom_geni_serial_startup,
+ .request_port = qcom_geni_serial_request_port,
+ .config_port = qcom_geni_serial_config_port,
+ .shutdown = qcom_geni_serial_shutdown,
+ .type = qcom_geni_serial_get_type,
+ .set_mctrl = qcom_geni_serial_set_mctrl,
+ .get_mctrl = qcom_geni_serial_get_mctrl,
+ .pm = qcom_geni_serial_pm,
};
static int qcom_geni_serial_probe(struct platform_device *pdev)
@@ -1091,13 +1257,23 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
struct uart_port *uport;
struct resource *res;
int irq;
+ bool console = false;
+ struct uart_driver *drv;
- if (pdev->dev.of_node)
- line = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
+ console = true;
- if (line < 0 || line >= GENI_UART_CONS_PORTS)
- return -ENXIO;
- port = get_port_from_line(line);
+ if (pdev->dev.of_node) {
+ if (console) {
+ drv = &qcom_geni_console_driver;
+ line = of_alias_get_id(pdev->dev.of_node, "serial");
+ } else {
+ drv = &qcom_geni_uart_driver;
+ line = of_alias_get_id(pdev->dev.of_node, "hsuart");
+ }
+ }
+
+ port = get_port_from_line(line, console);
if (IS_ERR(port)) {
dev_err(&pdev->dev, "Invalid line %d\n", line);
return PTR_ERR(port);
@@ -1134,10 +1310,12 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
}
uport->irq = irq;
- uport->private_data = &qcom_geni_console_driver;
+ uport->private_data = drv;
platform_set_drvdata(pdev, port);
- port->handle_rx = handle_rx_console;
- return uart_add_one_port(&qcom_geni_console_driver, uport);
+ port->handle_rx = console ? handle_rx_console : handle_rx_uart;
+ if (!console)
+ device_create_file(uport->dev, &dev_attr_loopback);
+ return uart_add_one_port(drv, uport);
}
static int qcom_geni_serial_remove(struct platform_device *pdev)
@@ -1154,7 +1332,17 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
- uart_suspend_port(uport->private_data, uport);
+ if (uart_console(uport)) {
+ uart_suspend_port(uport->private_data, uport);
+ } else {
+ struct uart_state *state = uport->state;
+ /*
+ * If the port is open, deny system suspend.
+ */
+ if (state->pm_state == UART_PM_STATE_ON)
+ return -EBUSY;
+ }
+
return 0;
}
@@ -1163,7 +1351,8 @@ static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
- if (console_suspend_enabled && uport->suspended) {
+ if (uart_console(uport) &&
+ console_suspend_enabled && uport->suspended) {
uart_resume_port(uport->private_data, uport);
/*
* uart_suspend_port() invokes port shutdown which in turn
@@ -1185,6 +1374,7 @@ static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
static const struct of_device_id qcom_geni_serial_match_table[] = {
{ .compatible = "qcom,geni-debug-uart", },
+ { .compatible = "qcom,geni-uart", },
{}
};
MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
@@ -1207,9 +1397,17 @@ static int __init qcom_geni_serial_init(void)
if (ret)
return ret;
+ ret = uart_register_driver(&qcom_geni_uart_driver);
+ if (ret) {
+ console_unregister(&qcom_geni_console_driver);
+ return ret;
+ }
+
ret = platform_driver_register(&qcom_geni_serial_platform_driver);
- if (ret)
+ if (ret) {
console_unregister(&qcom_geni_console_driver);
+ uart_unregister_driver(&qcom_geni_uart_driver);
+ }
return ret;
}
module_init(qcom_geni_serial_init);
@@ -1218,6 +1416,7 @@ static void __exit qcom_geni_serial_exit(void)
{
platform_driver_unregister(&qcom_geni_serial_platform_driver);
console_unregister(&qcom_geni_console_driver);
+ uart_unregister_driver(&qcom_geni_uart_driver);
}
module_exit(qcom_geni_serial_exit);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9c14a453f73c..80bb56facfb6 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -182,6 +182,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
{
struct uart_port *uport = uart_port_check(state);
unsigned long page;
+ unsigned long flags = 0;
int retval = 0;
if (uport->type == PORT_UNKNOWN)
@@ -196,15 +197,18 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
* Initialise and allocate the transmit and temporary
* buffer.
*/
- if (!state->xmit.buf) {
- /* This is protected by the per port mutex */
- page = get_zeroed_page(GFP_KERNEL);
- if (!page)
- return -ENOMEM;
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+ uart_port_lock(state, flags);
+ if (!state->xmit.buf) {
state->xmit.buf = (unsigned char *) page;
uart_circ_clear(&state->xmit);
+ } else {
+ free_page(page);
}
+ uart_port_unlock(uport, flags);
retval = uport->ops->startup(uport);
if (retval == 0) {
@@ -263,6 +267,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
{
struct uart_port *uport = uart_port_check(state);
struct tty_port *port = &state->port;
+ unsigned long flags = 0;
/*
* Set the TTY IO error marker
@@ -295,10 +300,12 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
/*
* Free the transmit buffer page.
*/
+ uart_port_lock(state, flags);
if (state->xmit.buf) {
free_page((unsigned long)state->xmit.buf);
state->xmit.buf = NULL;
}
+ uart_port_unlock(uport, flags);
}
/**
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c181eb37f985..ac4424bf6b13 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -65,6 +65,8 @@ enum {
SCIx_RXI_IRQ,
SCIx_TXI_IRQ,
SCIx_BRI_IRQ,
+ SCIx_DRI_IRQ,
+ SCIx_TEI_IRQ,
SCIx_NR_IRQS,
SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
@@ -135,6 +137,8 @@ struct sci_port {
struct dma_chan *chan_rx;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct dma_chan *chan_tx_saved;
+ struct dma_chan *chan_rx_saved;
dma_cookie_t cookie_tx;
dma_cookie_t cookie_rx[2];
dma_cookie_t active_rx;
@@ -315,15 +319,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
[SCIx_SH4_SCIF_REGTYPE] = {
.regs = {
[SCSMR] = { 0x00, 16 },
- [SCBRR] = { 0x04, 8 },
- [SCSCR] = { 0x08, 16 },
- [SCxTDR] = { 0x0c, 8 },
- [SCxSR] = { 0x10, 16 },
- [SCxRDR] = { 0x14, 8 },
- [SCFCR] = { 0x18, 16 },
- [SCFDR] = { 0x1c, 16 },
- [SCSPTR] = { 0x20, 16 },
- [SCLSR] = { 0x24, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 16 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 16 },
+ [SCFDR] = { 0x0e, 16 },
+ [SCSPTR] = { 0x10, 16 },
+ [SCLSR] = { 0x12, 16 },
},
.fifosize = 16,
.overrun_reg = SCLSR,
@@ -1212,25 +1216,16 @@ static int sci_dma_rx_find_active(struct sci_port *s)
return -1;
}
-static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+static void sci_rx_dma_release(struct sci_port *s)
{
- struct dma_chan *chan = s->chan_rx;
- struct uart_port *port = &s->port;
- unsigned long flags;
+ struct dma_chan *chan = s->chan_rx_saved;
- spin_lock_irqsave(&port->lock, flags);
- s->chan_rx = NULL;
+ s->chan_rx_saved = s->chan_rx = NULL;
s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
- spin_unlock_irqrestore(&port->lock, flags);
- dmaengine_terminate_all(chan);
+ dmaengine_terminate_sync(chan);
dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
sg_dma_address(&s->sg_rx[0]));
dma_release_channel(chan);
- if (enable_pio) {
- spin_lock_irqsave(&port->lock, flags);
- sci_start_rx(port);
- spin_unlock_irqrestore(&port->lock, flags);
- }
}
static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec)
@@ -1289,33 +1284,31 @@ static void sci_dma_rx_complete(void *arg)
fail:
spin_unlock_irqrestore(&port->lock, flags);
dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
- sci_rx_dma_release(s, true);
+ /* Switch to PIO */
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_rx = NULL;
+ sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
}
-static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+static void sci_tx_dma_release(struct sci_port *s)
{
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
- unsigned long flags;
+ struct dma_chan *chan = s->chan_tx_saved;
- spin_lock_irqsave(&port->lock, flags);
- s->chan_tx = NULL;
+ cancel_work_sync(&s->work_tx);
+ s->chan_tx_saved = s->chan_tx = NULL;
s->cookie_tx = -EINVAL;
- spin_unlock_irqrestore(&port->lock, flags);
- dmaengine_terminate_all(chan);
+ dmaengine_terminate_sync(chan);
dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
DMA_TO_DEVICE);
dma_release_channel(chan);
- if (enable_pio) {
- spin_lock_irqsave(&port->lock, flags);
- sci_start_tx(port);
- spin_unlock_irqrestore(&port->lock, flags);
- }
}
static void sci_submit_rx(struct sci_port *s)
{
struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
int i;
for (i = 0; i < 2; i++) {
@@ -1343,11 +1336,15 @@ static void sci_submit_rx(struct sci_port *s)
fail:
if (i)
- dmaengine_terminate_all(chan);
+ dmaengine_terminate_async(chan);
for (i = 0; i < 2; i++)
s->cookie_rx[i] = -EINVAL;
s->active_rx = -EINVAL;
- sci_rx_dma_release(s, true);
+ /* Switch to PIO */
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_rx = NULL;
+ sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static void work_fn_tx(struct work_struct *work)
@@ -1357,6 +1354,7 @@ static void work_fn_tx(struct work_struct *work)
struct dma_chan *chan = s->chan_tx;
struct uart_port *port = &s->port;
struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
dma_addr_t buf;
/*
@@ -1378,9 +1376,7 @@ static void work_fn_tx(struct work_struct *work)
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
+ goto switch_to_pio;
}
dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
@@ -1393,15 +1389,21 @@ static void work_fn_tx(struct work_struct *work)
s->cookie_tx = dmaengine_submit(desc);
if (dma_submit_error(s->cookie_tx)) {
dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
+ goto switch_to_pio;
}
dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
dma_async_issue_pending(chan);
+ return;
+
+switch_to_pio:
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_tx = NULL;
+ sci_start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
}
static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
@@ -1452,7 +1454,7 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
}
/* Handle incomplete DMA receive */
- dmaengine_terminate_all(s->chan_rx);
+ dmaengine_terminate_async(s->chan_rx);
read = sg_dma_len(&s->sg_rx[active]) - state.residue;
if (read) {
@@ -1535,7 +1537,6 @@ static void sci_request_dma(struct uart_port *port)
chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV);
dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
if (chan) {
- s->chan_tx = chan;
/* UART circular tx buffer is an aligned page. */
s->tx_dma_addr = dma_map_single(chan->device->dev,
port->state->xmit.buf,
@@ -1544,14 +1545,14 @@ static void sci_request_dma(struct uart_port *port)
if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
dma_release_channel(chan);
- s->chan_tx = NULL;
} else {
dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
__func__, UART_XMIT_SIZE,
port->state->xmit.buf, &s->tx_dma_addr);
- }
- INIT_WORK(&s->work_tx, work_fn_tx);
+ INIT_WORK(&s->work_tx, work_fn_tx);
+ s->chan_tx_saved = s->chan_tx = chan;
+ }
}
chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM);
@@ -1561,8 +1562,6 @@ static void sci_request_dma(struct uart_port *port)
dma_addr_t dma;
void *buf;
- s->chan_rx = chan;
-
s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
&dma, GFP_KERNEL);
@@ -1570,7 +1569,6 @@ static void sci_request_dma(struct uart_port *port)
dev_warn(port->dev,
"Failed to allocate Rx dma buffer, using PIO\n");
dma_release_channel(chan);
- s->chan_rx = NULL;
return;
}
@@ -1591,6 +1589,8 @@ static void sci_request_dma(struct uart_port *port)
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
sci_submit_rx(s);
+
+ s->chan_rx_saved = s->chan_rx = chan;
}
}
@@ -1598,10 +1598,10 @@ static void sci_free_dma(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
- if (s->chan_tx)
- sci_tx_dma_release(s, false);
- if (s->chan_rx)
- sci_rx_dma_release(s, false);
+ if (s->chan_tx_saved)
+ sci_tx_dma_release(s);
+ if (s->chan_rx_saved)
+ sci_rx_dma_release(s);
}
static void sci_flush_buffer(struct uart_port *port)
@@ -1683,11 +1683,35 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
return IRQ_HANDLED;
}
+static irqreturn_t sci_br_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+ sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
+ if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) {
+ /* Break and Error interrupts are muxed */
+ unsigned short ssr_status = serial_port_in(port, SCxSR);
+
+ /* Break Interrupt */
+ if (ssr_status & SCxSR_BRK(port))
+ sci_br_interrupt(irq, ptr);
+
+ /* Break only? */
+ if (!(ssr_status & SCxSR_ERRORS(port)))
+ return IRQ_HANDLED;
+ }
+
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
@@ -1710,17 +1734,6 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
return IRQ_HANDLED;
}
-static irqreturn_t sci_br_interrupt(int irq, void *ptr)
-{
- struct uart_port *port = ptr;
-
- /* Handle BREAKs */
- sci_handle_breaks(port);
- sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
-
- return IRQ_HANDLED;
-}
-
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
@@ -1794,6 +1807,16 @@ static const struct sci_irq_desc {
.handler = sci_br_interrupt,
},
+ [SCIx_DRI_IRQ] = {
+ .desc = "rx ready",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TEI_IRQ] = {
+ .desc = "tx end",
+ .handler = sci_tx_interrupt,
+ },
+
/*
* Special muxed handler.
*/
@@ -1806,12 +1829,19 @@ static const struct sci_irq_desc {
static int sci_request_irq(struct sci_port *port)
{
struct uart_port *up = &port->port;
- int i, j, ret = 0;
+ int i, j, w, ret = 0;
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
const struct sci_irq_desc *desc;
int irq;
+ /* Check if already registered (muxed) */
+ for (w = 0; w < i; w++)
+ if (port->irqs[w] == port->irqs[i])
+ w = i + 1;
+ if (w > i)
+ continue;
+
if (SCIx_IRQ_IS_MUXED(port)) {
i = SCIx_MUX_IRQ;
irq = up->irq;
@@ -2092,13 +2122,15 @@ static void sci_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (s->chan_rx) {
+ if (s->chan_rx_saved) {
dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__,
port->line);
hrtimer_cancel(&s->rx_timer);
}
#endif
+ if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+ del_timer_sync(&s->rx_fifo_timer);
sci_free_irq(s);
sci_free_dma(port);
}
@@ -2778,7 +2810,7 @@ static int sci_init_single(struct platform_device *dev,
{
struct uart_port *port = &sci_port->port;
const struct resource *res;
- unsigned int i;
+ unsigned int i, regtype;
int ret;
sci_port->cfg = p;
@@ -2799,22 +2831,23 @@ static int sci_init_single(struct platform_device *dev,
/* The SCI generates several interrupts. They can be muxed together or
* connected to different interrupt lines. In the muxed case only one
- * interrupt resource is specified. In the non-muxed case three or four
- * interrupt resources are specified, as the BRI interrupt is optional.
+ * interrupt resource is specified as there is only one interrupt ID.
+ * In the non-muxed case, up to 6 interrupt signals might be generated
+ * from the SCI, however those signals might have their own individual
+ * interrupt ID numbers, or muxed together with another interrupt.
*/
if (sci_port->irqs[0] < 0)
return -ENXIO;
- if (sci_port->irqs[1] < 0) {
- sci_port->irqs[1] = sci_port->irqs[0];
- sci_port->irqs[2] = sci_port->irqs[0];
- sci_port->irqs[3] = sci_port->irqs[0];
- }
+ if (sci_port->irqs[1] < 0)
+ for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++)
+ sci_port->irqs[i] = sci_port->irqs[0];
sci_port->params = sci_probe_regmap(p);
if (unlikely(sci_port->params == NULL))
return -EINVAL;
+ regtype = sci_port->params - sci_port_params;
switch (p->type) {
case PORT_SCIFB:
sci_port->rx_trigger = 48;
@@ -2869,6 +2902,10 @@ static int sci_init_single(struct platform_device *dev,
port->regshift = 1;
}
+ if (regtype == SCIx_SH4_SCIF_REGTYPE)
+ if (sci_port->reg_size >= 0x20)
+ port->regshift = 1;
+
/*
* The UART port needs an IRQ value, so we peg this to the RX IRQ
* for the multi-IRQ ports, which is where we are primarily
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index c47db7826189..98d3eadd2fd0 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -21,6 +21,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/clk.h>
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
@@ -54,6 +55,11 @@
#define ULITE_CONTROL_RST_RX 0x02
#define ULITE_CONTROL_IE 0x10
+struct uartlite_data {
+ const struct uartlite_reg_ops *reg_ops;
+ struct clk *clk;
+};
+
struct uartlite_reg_ops {
u32 (*in)(void __iomem *addr);
void (*out)(u32 val, void __iomem *addr);
@@ -91,16 +97,16 @@ static const struct uartlite_reg_ops uartlite_le = {
static inline u32 uart_in32(u32 offset, struct uart_port *port)
{
- const struct uartlite_reg_ops *reg_ops = port->private_data;
+ struct uartlite_data *pdata = port->private_data;
- return reg_ops->in(port->membase + offset);
+ return pdata->reg_ops->in(port->membase + offset);
}
static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
{
- const struct uartlite_reg_ops *reg_ops = port->private_data;
+ struct uartlite_data *pdata = port->private_data;
- reg_ops->out(val, port->membase + offset);
+ pdata->reg_ops->out(val, port->membase + offset);
}
static struct uart_port ulite_ports[ULITE_NR_UARTS];
@@ -257,8 +263,15 @@ static void ulite_break_ctl(struct uart_port *port, int ctl)
static int ulite_startup(struct uart_port *port)
{
+ struct uartlite_data *pdata = port->private_data;
int ret;
+ ret = clk_enable(pdata->clk);
+ if (ret) {
+ dev_err(port->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
"uartlite", port);
if (ret)
@@ -273,9 +286,12 @@ static int ulite_startup(struct uart_port *port)
static void ulite_shutdown(struct uart_port *port)
{
+ struct uartlite_data *pdata = port->private_data;
+
uart_out32(0, ULITE_CONTROL, port);
uart_in32(ULITE_CONTROL, port); /* dummy */
free_irq(port->irq, port);
+ clk_disable(pdata->clk);
}
static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -325,6 +341,7 @@ static void ulite_release_port(struct uart_port *port)
static int ulite_request_port(struct uart_port *port)
{
+ struct uartlite_data *pdata = port->private_data;
int ret;
pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
@@ -342,13 +359,13 @@ static int ulite_request_port(struct uart_port *port)
return -EBUSY;
}
- port->private_data = (void *)&uartlite_be;
+ pdata->reg_ops = &uartlite_be;
ret = uart_in32(ULITE_CONTROL, port);
uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
ret = uart_in32(ULITE_STATUS, port);
/* Endianess detection */
if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
- port->private_data = (void *)&uartlite_le;
+ pdata->reg_ops = &uartlite_le;
return 0;
}
@@ -365,6 +382,17 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
+static void ulite_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uartlite_data *pdata = port->private_data;
+
+ if (!state)
+ clk_enable(pdata->clk);
+ else
+ clk_disable(pdata->clk);
+}
+
#ifdef CONFIG_CONSOLE_POLL
static int ulite_get_poll_char(struct uart_port *port)
{
@@ -400,6 +428,7 @@ static const struct uart_ops ulite_ops = {
.request_port = ulite_request_port,
.config_port = ulite_config_port,
.verify_port = ulite_verify_port,
+ .pm = ulite_pm,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = ulite_get_poll_char,
.poll_put_char = ulite_put_poll_char,
@@ -585,10 +614,12 @@ static struct uart_driver ulite_uart_driver = {
* @id: requested id number. Pass -1 for automatic port assignment
* @base: base address of uartlite registers
* @irq: irq number for uartlite
+ * @pdata: private data for uartlite
*
* Returns: 0 on success, <0 otherwise
*/
-static int ulite_assign(struct device *dev, int id, u32 base, int irq)
+static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+ struct uartlite_data *pdata)
{
struct uart_port *port;
int rc;
@@ -625,6 +656,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq)
port->dev = dev;
port->type = PORT_UNKNOWN;
port->line = id;
+ port->private_data = pdata;
dev_set_drvdata(dev, port);
@@ -658,10 +690,44 @@ static int ulite_release(struct device *dev)
return rc;
}
+/**
+ * ulite_suspend - Stop the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused ulite_suspend(struct device *dev)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+
+ if (port)
+ uart_suspend_port(&ulite_uart_driver, port);
+
+ return 0;
+}
+
+/**
+ * ulite_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused ulite_resume(struct device *dev)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+
+ if (port)
+ uart_resume_port(&ulite_uart_driver, port);
+
+ return 0;
+}
+
/* ---------------------------------------------------------------------
* Platform bus binding
*/
+static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
+
#if defined(CONFIG_OF)
/* Match table for of_platform binding */
static const struct of_device_id ulite_of_match[] = {
@@ -675,7 +741,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
static int ulite_probe(struct platform_device *pdev)
{
struct resource *res;
- int irq;
+ struct uartlite_data *pdata;
+ int irq, ret;
int id = pdev->id;
#ifdef CONFIG_OF
const __be32 *prop;
@@ -684,6 +751,10 @@ static int ulite_probe(struct platform_device *pdev)
if (prop)
id = be32_to_cpup(prop);
#endif
+ pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -693,11 +764,33 @@ static int ulite_probe(struct platform_device *pdev)
if (irq <= 0)
return -ENXIO;
- return ulite_assign(&pdev->dev, id, res->start, irq);
+ pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+ if (IS_ERR(pdata->clk)) {
+ if (PTR_ERR(pdata->clk) != -ENOENT)
+ return PTR_ERR(pdata->clk);
+
+ /*
+ * Clock framework support is optional, continue on
+ * anyways if we don't find a matching clock.
+ */
+ pdata->clk = NULL;
+ }
+
+ ret = clk_prepare(pdata->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to prepare clock\n");
+ return ret;
+ }
+
+ return ulite_assign(&pdev->dev, id, res->start, irq, pdata);
}
static int ulite_remove(struct platform_device *pdev)
{
+ struct uart_port *port = dev_get_drvdata(&pdev->dev);
+ struct uartlite_data *pdata = port->private_data;
+
+ clk_disable_unprepare(pdata->clk);
return ulite_release(&pdev->dev);
}
@@ -710,6 +803,7 @@ static struct platform_driver ulite_platform_driver = {
.driver = {
.name = "uartlite",
.of_match_table = of_match_ptr(ulite_of_match),
+ .pm = &ulite_pm_ops,
},
};
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 8a3e34234e98..a48f19b1b88f 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -167,6 +167,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */
/* baud dividers min/max values */
#define CDNS_UART_BDIV_MIN 4
@@ -829,7 +830,7 @@ static int cdns_uart_startup(struct uart_port *port)
* the receiver.
*/
status = readl(port->membase + CDNS_UART_CR);
- status &= CDNS_UART_CR_RX_DIS;
+ status &= ~CDNS_UART_CR_RX_DIS;
status |= CDNS_UART_CR_RX_EN;
writel(status, port->membase + CDNS_UART_CR);
@@ -1099,23 +1100,14 @@ static const struct uart_ops cdns_uart_ops = {
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
- * cdns_uart_console_wait_tx - Wait for the TX to be full
- * @port: Handle to the uart port structure
- */
-static void cdns_uart_console_wait_tx(struct uart_port *port)
-{
- while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
- barrier();
-}
-
-/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
* @port: Handle to the uart port structure
* @ch: Character to be written
*/
static void cdns_uart_console_putchar(struct uart_port *port, int ch)
{
- cdns_uart_console_wait_tx(port);
+ while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)
+ cpu_relax();
writel(ch, port->membase + CDNS_UART_FIFO);
}
@@ -1206,9 +1198,10 @@ static void cdns_uart_console_write(struct console *co, const char *s,
writel(ctrl, port->membase + CDNS_UART_CR);
uart_console_write(port, s, count, cdns_uart_console_putchar);
- cdns_uart_console_wait_tx(port);
-
- writel(ctrl, port->membase + CDNS_UART_CR);
+ while ((readl(port->membase + CDNS_UART_SR) &
+ (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE)) !=
+ CDNS_UART_SR_TXEMPTY)
+ cpu_relax();
/* restore interrupt state */
writel(imr, port->membase + CDNS_UART_IER);
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index 6ff8cdfc9d2a..7576ceace571 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -100,11 +100,11 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
if (cbaud == B0)
return tty_termios_baud_rate(termios);
-
+#ifdef BOTHER
/* Magic token for arbitrary speed via c_ispeed*/
if (cbaud == BOTHER)
return termios->c_ispeed;
-
+#endif
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
@@ -114,9 +114,9 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
cbaud += 15;
}
return baud_table[cbaud];
-#else
+#else /* IBSHIFT */
return tty_termios_baud_rate(termios);
-#endif
+#endif /* IBSHIFT */
}
EXPORT_SYMBOL(tty_termios_input_baud_rate);
@@ -156,19 +156,27 @@ void tty_termios_encode_baud_rate(struct ktermios *termios,
termios->c_ispeed = ibaud;
termios->c_ospeed = obaud;
+#ifdef IBSHIFT
+ if ((termios->c_cflag >> IBSHIFT) & CBAUD)
+ ibinput = 1; /* An input speed was specified */
+#endif
#ifdef BOTHER
/* If the user asked for a precise weird speed give a precise weird
answer. If they asked for a Bfoo speed they may have problems
digesting non-exact replies so fuzz a bit */
- if ((termios->c_cflag & CBAUD) == BOTHER)
+ if ((termios->c_cflag & CBAUD) == BOTHER) {
oclose = 0;
+ if (!ibinput)
+ iclose = 0;
+ }
if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
iclose = 0;
- if ((termios->c_cflag >> IBSHIFT) & CBAUD)
- ibinput = 1; /* An input speed was specified */
#endif
termios->c_cflag &= ~CBAUD;
+#ifdef IBSHIFT
+ termios->c_cflag &= ~(CBAUD << IBSHIFT);
+#endif
/*
* Our goal is to find a close match to the standard baud rate
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index aba59521ad48..11c2df904ac9 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -814,9 +814,9 @@ void start_tty(struct tty_struct *tty)
}
EXPORT_SYMBOL(start_tty);
-static void tty_update_time(struct timespec *time)
+static void tty_update_time(struct timespec64 *time)
{
- unsigned long sec = get_seconds();
+ time64_t sec = ktime_get_real_seconds();
/*
* We only care if the two values differ in anything other than the
@@ -867,13 +867,8 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
i = -EIO;
tty_ldisc_deref(ld);
- if (i > 0) {
- struct timespec ts;
-
- ts = timespec64_to_timespec(inode->i_atime);
- tty_update_time(&ts);
- inode->i_atime = timespec_to_timespec64(ts);
- }
+ if (i > 0)
+ tty_update_time(&inode->i_atime);
return i;
}
@@ -974,11 +969,7 @@ static inline ssize_t do_tty_write(
cond_resched();
}
if (written) {
- struct timespec ts;
-
- ts = timespec64_to_timespec(file_inode(file)->i_mtime);
- tty_update_time(&ts);
- file_inode(file)->i_mtime = timespec_to_timespec64(ts);
+ tty_update_time(&file_inode(file)->i_mtime);
ret = written;
}
out:
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index 37a91b3df980..0c98d88f795a 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -74,28 +74,6 @@ struct ldsem_waiter {
struct task_struct *task;
};
-static inline long ldsem_atomic_update(long delta, struct ld_semaphore *sem)
-{
- return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
-}
-
-/*
- * ldsem_cmpxchg() updates @*old with the last-known sem->count value.
- * Returns 1 if count was successfully changed; @*old will have @new value.
- * Returns 0 if count was not changed; @*old will have most recent sem->count
- */
-static inline int ldsem_cmpxchg(long *old, long new, struct ld_semaphore *sem)
-{
- long tmp = atomic_long_cmpxchg(&sem->count, *old, new);
- if (tmp == *old) {
- *old = new;
- return 1;
- } else {
- *old = tmp;
- return 0;
- }
-}
-
/*
* Initialize an ldsem:
*/
@@ -109,7 +87,7 @@ void __init_ldsem(struct ld_semaphore *sem, const char *name,
debug_check_no_locks_freed((void *)sem, sizeof(*sem));
lockdep_init_map(&sem->dep_map, name, key, 0);
#endif
- sem->count = LDSEM_UNLOCKED;
+ atomic_long_set(&sem->count, LDSEM_UNLOCKED);
sem->wait_readers = 0;
raw_spin_lock_init(&sem->wait_lock);
INIT_LIST_HEAD(&sem->read_wait);
@@ -122,16 +100,17 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
struct task_struct *tsk;
long adjust, count;
- /* Try to grant read locks to all readers on the read wait list.
+ /*
+ * Try to grant read locks to all readers on the read wait list.
* Note the 'active part' of the count is incremented by
* the number of readers before waking any processes up.
*/
adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS);
- count = ldsem_atomic_update(adjust, sem);
+ count = atomic_long_add_return(adjust, &sem->count);
do {
if (count > 0)
break;
- if (ldsem_cmpxchg(&count, count - adjust, sem))
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count - adjust))
return;
} while (1);
@@ -148,14 +127,15 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
static inline int writer_trylock(struct ld_semaphore *sem)
{
- /* only wake this writer if the active part of the count can be
+ /*
+ * Only wake this writer if the active part of the count can be
* transitioned from 0 -> 1
*/
- long count = ldsem_atomic_update(LDSEM_ACTIVE_BIAS, sem);
+ long count = atomic_long_add_return(LDSEM_ACTIVE_BIAS, &sem->count);
do {
if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS)
return 1;
- if (ldsem_cmpxchg(&count, count - LDSEM_ACTIVE_BIAS, sem))
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count - LDSEM_ACTIVE_BIAS))
return 0;
} while (1);
}
@@ -205,12 +185,16 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
/* set up my own style of waitqueue */
raw_spin_lock_irq(&sem->wait_lock);
- /* Try to reverse the lock attempt but if the count has changed
+ /*
+ * Try to reverse the lock attempt but if the count has changed
* so that reversing fails, check if there are are no waiters,
- * and early-out if not */
+ * and early-out if not
+ */
do {
- if (ldsem_cmpxchg(&count, count + adjust, sem))
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) {
+ count += adjust;
break;
+ }
if (count > 0) {
raw_spin_unlock_irq(&sem->wait_lock);
return sem;
@@ -243,12 +227,14 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
__set_current_state(TASK_RUNNING);
if (!timeout) {
- /* lock timed out but check if this task was just
+ /*
+ * Lock timed out but check if this task was just
* granted lock ownership - if so, pretend there
- * was no timeout; otherwise, cleanup lock wait */
+ * was no timeout; otherwise, cleanup lock wait.
+ */
raw_spin_lock_irq(&sem->wait_lock);
if (waiter.task) {
- ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+ atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count);
list_del(&waiter.list);
raw_spin_unlock_irq(&sem->wait_lock);
put_task_struct(waiter.task);
@@ -273,11 +259,13 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout)
/* set up my own style of waitqueue */
raw_spin_lock_irq(&sem->wait_lock);
- /* Try to reverse the lock attempt but if the count has changed
+ /*
+ * Try to reverse the lock attempt but if the count has changed
* so that reversing fails, check if the lock is now owned,
- * and early-out if so */
+ * and early-out if so.
+ */
do {
- if (ldsem_cmpxchg(&count, count + adjust, sem))
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust))
break;
if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) {
raw_spin_unlock_irq(&sem->wait_lock);
@@ -303,7 +291,7 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout)
}
if (!locked)
- ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+ atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count);
list_del(&waiter.list);
raw_spin_unlock_irq(&sem->wait_lock);
@@ -324,7 +312,7 @@ static int __ldsem_down_read_nested(struct ld_semaphore *sem,
lockdep_acquire_read(sem, subclass, 0, _RET_IP_);
- count = ldsem_atomic_update(LDSEM_READ_BIAS, sem);
+ count = atomic_long_add_return(LDSEM_READ_BIAS, &sem->count);
if (count <= 0) {
lock_stat(sem, contended);
if (!down_read_failed(sem, count, timeout)) {
@@ -343,7 +331,7 @@ static int __ldsem_down_write_nested(struct ld_semaphore *sem,
lockdep_acquire(sem, subclass, 0, _RET_IP_);
- count = ldsem_atomic_update(LDSEM_WRITE_BIAS, sem);
+ count = atomic_long_add_return(LDSEM_WRITE_BIAS, &sem->count);
if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) {
lock_stat(sem, contended);
if (!down_write_failed(sem, count, timeout)) {
@@ -370,10 +358,10 @@ int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout)
*/
int ldsem_down_read_trylock(struct ld_semaphore *sem)
{
- long count = sem->count;
+ long count = atomic_long_read(&sem->count);
while (count >= 0) {
- if (ldsem_cmpxchg(&count, count + LDSEM_READ_BIAS, sem)) {
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_READ_BIAS)) {
lockdep_acquire_read(sem, 0, 1, _RET_IP_);
lock_stat(sem, acquired);
return 1;
@@ -396,10 +384,10 @@ int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout)
*/
int ldsem_down_write_trylock(struct ld_semaphore *sem)
{
- long count = sem->count;
+ long count = atomic_long_read(&sem->count);
while ((count & LDSEM_ACTIVE_MASK) == 0) {
- if (ldsem_cmpxchg(&count, count + LDSEM_WRITE_BIAS, sem)) {
+ if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_WRITE_BIAS)) {
lockdep_acquire(sem, 0, 1, _RET_IP_);
lock_stat(sem, acquired);
return 1;
@@ -417,7 +405,7 @@ void ldsem_up_read(struct ld_semaphore *sem)
lockdep_release(sem, 1, _RET_IP_);
- count = ldsem_atomic_update(-LDSEM_READ_BIAS, sem);
+ count = atomic_long_add_return(-LDSEM_READ_BIAS, &sem->count);
if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0)
ldsem_wake(sem);
}
@@ -431,7 +419,7 @@ void ldsem_up_write(struct ld_semaphore *sem)
lockdep_release(sem, 1, _RET_IP_);
- count = ldsem_atomic_update(-LDSEM_WRITE_BIAS, sem);
+ count = atomic_long_add_return(-LDSEM_WRITE_BIAS, &sem->count);
if (count < 0)
ldsem_wake(sem);
}
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index de310621b8e7..88312c6c92cc 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -690,7 +690,35 @@ static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag)
*/
static void k_dead(struct vc_data *vc, unsigned char value, char up_flag)
{
- static const unsigned char ret_diacr[NR_DEAD] = {'`', '\'', '^', '~', '"', ',' };
+ static const unsigned char ret_diacr[NR_DEAD] = {
+ '`', /* dead_grave */
+ '\'', /* dead_acute */
+ '^', /* dead_circumflex */
+ '~', /* dead_tilda */
+ '"', /* dead_diaeresis */
+ ',', /* dead_cedilla */
+ '_', /* dead_macron */
+ 'U', /* dead_breve */
+ '.', /* dead_abovedot */
+ '*', /* dead_abovering */
+ '=', /* dead_doubleacute */
+ 'c', /* dead_caron */
+ 'k', /* dead_ogonek */
+ 'i', /* dead_iota */
+ '#', /* dead_voiced_sound */
+ 'o', /* dead_semivoiced_sound */
+ '!', /* dead_belowdot */
+ '?', /* dead_hook */
+ '+', /* dead_horn */
+ '-', /* dead_stroke */
+ ')', /* dead_abovecomma */
+ '(', /* dead_abovereversedcomma */
+ ':', /* dead_doublegrave */
+ 'n', /* dead_invertedbreve */
+ ';', /* dead_belowcomma */
+ '$', /* dead_currency */
+ '@', /* dead_greek */
+ };
k_deadunicode(vc, ret_diacr[value], up_flag);
}
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 90ea1cc52b7a..07496c711d7d 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -57,11 +57,13 @@ static inline void highlight_pointer(const int where)
complement_pos(sel_cons, where);
}
-static u16
+static u32
sel_pos(int n)
{
+ if (use_unicode)
+ return screen_glyph_unicode(sel_cons, n / 2);
return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
- use_unicode);
+ 0);
}
/**
@@ -90,7 +92,8 @@ static u32 inwordLut[]={
0x07FFFFFE, /* lowercase */
};
-static inline int inword(const u16 c) {
+static inline int inword(const u32 c)
+{
return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}
@@ -116,14 +119,8 @@ static inline int atedge(const int p, int size_row)
return (!(p % size_row) || !((p + 2) % size_row));
}
-/* constrain v such that v <= u */
-static inline unsigned short limit(const unsigned short v, const unsigned short u)
-{
- return (v > u) ? u : v;
-}
-
-/* stores the char in UTF8 and returns the number of bytes used (1-3) */
-static int store_utf8(u16 c, char *p)
+/* stores the char in UTF8 and returns the number of bytes used (1-4) */
+static int store_utf8(u32 c, char *p)
{
if (c < 0x80) {
/* 0******* */
@@ -134,13 +131,26 @@ static int store_utf8(u16 c, char *p)
p[0] = 0xc0 | (c >> 6);
p[1] = 0x80 | (c & 0x3f);
return 2;
- } else {
+ } else if (c < 0x10000) {
/* 1110**** 10****** 10****** */
p[0] = 0xe0 | (c >> 12);
p[1] = 0x80 | ((c >> 6) & 0x3f);
p[2] = 0x80 | (c & 0x3f);
return 3;
- }
+ } else if (c < 0x110000) {
+ /* 11110*** 10****** 10****** 10****** */
+ p[0] = 0xf0 | (c >> 18);
+ p[1] = 0x80 | ((c >> 12) & 0x3f);
+ p[2] = 0x80 | ((c >> 6) & 0x3f);
+ p[3] = 0x80 | (c & 0x3f);
+ return 4;
+ } else {
+ /* outside Unicode, replace with U+FFFD */
+ p[0] = 0xef;
+ p[1] = 0xbf;
+ p[2] = 0xbd;
+ return 3;
+ }
}
/**
@@ -160,17 +170,17 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
struct tiocl_selection v;
char *bp, *obp;
int i, ps, pe, multiplier;
- u16 c;
+ u32 c;
int mode;
poke_blanked_console();
if (copy_from_user(&v, sel, sizeof(*sel)))
return -EFAULT;
- v.xs = limit(v.xs - 1, vc->vc_cols - 1);
- v.ys = limit(v.ys - 1, vc->vc_rows - 1);
- v.xe = limit(v.xe - 1, vc->vc_cols - 1);
- v.ye = limit(v.ye - 1, vc->vc_rows - 1);
+ v.xs = min_t(u16, v.xs - 1, vc->vc_cols - 1);
+ v.ys = min_t(u16, v.ys - 1, vc->vc_rows - 1);
+ v.xe = min_t(u16, v.xe - 1, vc->vc_cols - 1);
+ v.ye = min_t(u16, v.ye - 1, vc->vc_rows - 1);
ps = v.ys * vc->vc_size_row + (v.xs << 1);
pe = v.ye * vc->vc_size_row + (v.xe << 1);
@@ -279,7 +289,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
sel_end = new_sel_end;
/* Allocate a new buffer before freeing the old one ... */
- multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */
+ multiplier = use_unicode ? 4 : 1; /* chars can take up to 4 bytes */
bp = kmalloc_array((sel_end - sel_start) / 2 + 1, multiplier,
GFP_KERNEL);
if (!bp) {
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index e4a66e1fd05f..2384ea85ffaf 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -10,6 +10,12 @@
* Attribute/character pair is in native endianity.
* [minor: N+128]
*
+ * /dev/vcsuN: similar to /dev/vcsaN but using 4-byte unicode values
+ * instead of 1-byte screen glyph values.
+ * [minor: N+64]
+ *
+ * /dev/vcsuaN: same idea as /dev/vcsaN for unicode (not yet implemented).
+ *
* This replaces screendump and part of selection, so that the system
* administrator can control access using file system permissions.
*
@@ -51,6 +57,26 @@
#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
+/*
+ * Our minor space:
+ *
+ * 0 ... 63 glyph mode without attributes
+ * 64 ... 127 unicode mode without attributes
+ * 128 ... 191 glyph mode with attributes
+ * 192 ... 255 unused (reserved for unicode with attributes)
+ *
+ * This relies on MAX_NR_CONSOLES being <= 63, meaning 63 actual consoles
+ * with minors 0, 64, 128 and 192 being proxies for the foreground console.
+ */
+#if MAX_NR_CONSOLES > 63
+#warning "/dev/vcs* devices may not accommodate more than 63 consoles"
+#endif
+
+#define console(inode) (iminor(inode) & 63)
+#define use_unicode(inode) (iminor(inode) & 64)
+#define use_attributes(inode) (iminor(inode) & 128)
+
+
struct vcs_poll_data {
struct notifier_block notifier;
unsigned int cons_num;
@@ -102,7 +128,7 @@ vcs_poll_data_get(struct file *file)
poll = kzalloc(sizeof(*poll), GFP_KERNEL);
if (!poll)
return NULL;
- poll->cons_num = iminor(file_inode(file)) & 127;
+ poll->cons_num = console(file_inode(file));
init_waitqueue_head(&poll->waitq);
poll->notifier.notifier_call = vcs_notifier;
if (register_vt_notifier(&poll->notifier) != 0) {
@@ -140,7 +166,7 @@ vcs_poll_data_get(struct file *file)
static struct vc_data*
vcs_vc(struct inode *inode, int *viewed)
{
- unsigned int currcons = iminor(inode) & 127;
+ unsigned int currcons = console(inode);
WARN_CONSOLE_UNLOCKED();
@@ -164,7 +190,6 @@ static int
vcs_size(struct inode *inode)
{
int size;
- int minor = iminor(inode);
struct vc_data *vc;
WARN_CONSOLE_UNLOCKED();
@@ -175,8 +200,12 @@ vcs_size(struct inode *inode)
size = vc->vc_rows * vc->vc_cols;
- if (minor & 128)
+ if (use_attributes(inode)) {
+ if (use_unicode(inode))
+ return -EOPNOTSUPP;
size = 2*size + HEADER_SIZE;
+ } else if (use_unicode(inode))
+ size *= 4;
return size;
}
@@ -197,12 +226,10 @@ static ssize_t
vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
struct inode *inode = file_inode(file);
- unsigned int currcons = iminor(inode);
struct vc_data *vc;
struct vcs_poll_data *poll;
- long pos;
- long attr, read;
- int col, maxcol, viewed;
+ long pos, read;
+ int attr, uni_mode, row, col, maxcol, viewed;
unsigned short *org = NULL;
ssize_t ret;
char *con_buf;
@@ -218,7 +245,8 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
*/
console_lock();
- attr = (currcons & 128);
+ uni_mode = use_unicode(inode);
+ attr = use_attributes(inode);
ret = -ENXIO;
vc = vcs_vc(inode, &viewed);
if (!vc)
@@ -227,6 +255,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
ret = -EINVAL;
if (pos < 0)
goto unlock_out;
+ /* we enforce 32-bit alignment for pos and count in unicode mode */
+ if (uni_mode && (pos | count) & 3)
+ goto unlock_out;
+
poll = file->private_data;
if (count && poll)
poll->seen_last_update = true;
@@ -266,7 +298,28 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
con_buf_start = con_buf0 = con_buf;
orig_count = this_round;
maxcol = vc->vc_cols;
- if (!attr) {
+ if (uni_mode) {
+ unsigned int nr;
+
+ ret = vc_uniscr_check(vc);
+ if (ret)
+ break;
+ p /= 4;
+ row = p / vc->vc_cols;
+ col = p % maxcol;
+ nr = maxcol - col;
+ do {
+ if (nr > this_round/4)
+ nr = this_round/4;
+ vc_uniscr_copy_line(vc, con_buf0, viewed,
+ row, col, nr);
+ con_buf0 += nr * 4;
+ this_round -= nr * 4;
+ row++;
+ col = 0;
+ nr = maxcol;
+ } while (this_round);
+ } else if (!attr) {
org = screen_pos(vc, p, viewed);
col = p % maxcol;
p += maxcol - col;
@@ -375,7 +428,6 @@ static ssize_t
vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
struct inode *inode = file_inode(file);
- unsigned int currcons = iminor(inode);
struct vc_data *vc;
long pos;
long attr, size, written;
@@ -396,7 +448,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
*/
console_lock();
- attr = (currcons & 128);
+ attr = use_attributes(inode);
ret = -ENXIO;
vc = vcs_vc(inode, &viewed);
if (!vc)
@@ -593,9 +645,15 @@ vcs_fasync(int fd, struct file *file, int on)
static int
vcs_open(struct inode *inode, struct file *filp)
{
- unsigned int currcons = iminor(inode) & 127;
+ unsigned int currcons = console(inode);
+ bool attr = use_attributes(inode);
+ bool uni_mode = use_unicode(inode);
int ret = 0;
-
+
+ /* we currently don't support attributes in unicode mode */
+ if (attr && uni_mode)
+ return -EOPNOTSUPP;
+
console_lock();
if(currcons && !vc_cons_allocated(currcons-1))
ret = -ENXIO;
@@ -628,6 +686,8 @@ void vcs_make_sysfs(int index)
{
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL,
"vcs%u", index + 1);
+ device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 65), NULL,
+ "vcsu%u", index + 1);
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL,
"vcsa%u", index + 1);
}
@@ -635,6 +695,7 @@ void vcs_make_sysfs(int index)
void vcs_remove_sysfs(int index)
{
device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 1));
+ device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 65));
device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 129));
}
@@ -647,6 +708,7 @@ int __init vcs_init(void)
vc_class = class_create(THIS_MODULE, "vc");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
+ device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 64), NULL, "vcsu");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
for (i = 0; i < MIN_NR_CONSOLES; i++)
vcs_make_sysfs(i);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 15eb6c829d39..5f1183b0b89d 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -104,6 +104,7 @@
#include <linux/kdb.h>
#include <linux/ctype.h>
#include <linux/bsearch.h>
+#include <linux/gcd.h>
#define MAX_NR_CON_DRIVER 16
@@ -317,6 +318,306 @@ void schedule_console_callback(void)
schedule_work(&console_work);
}
+/*
+ * Code to manage unicode-based screen buffers
+ */
+
+#ifdef NO_VC_UNI_SCREEN
+/* this disables and optimizes related code away at compile time */
+#define get_vc_uniscr(vc) NULL
+#else
+#define get_vc_uniscr(vc) vc->vc_uni_screen
+#endif
+
+#define VC_UNI_SCREEN_DEBUG 0
+
+typedef uint32_t char32_t;
+
+/*
+ * Our screen buffer is preceded by an array of line pointers so that
+ * scrolling only implies some pointer shuffling.
+ */
+struct uni_screen {
+ char32_t *lines[0];
+};
+
+static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows)
+{
+ struct uni_screen *uniscr;
+ void *p;
+ unsigned int memsize, i;
+
+ /* allocate everything in one go */
+ memsize = cols * rows * sizeof(char32_t);
+ memsize += rows * sizeof(char32_t *);
+ p = kmalloc(memsize, GFP_KERNEL);
+ if (!p)
+ return NULL;
+
+ /* initial line pointers */
+ uniscr = p;
+ p = uniscr->lines + rows;
+ for (i = 0; i < rows; i++) {
+ uniscr->lines[i] = p;
+ p += cols * sizeof(char32_t);
+ }
+ return uniscr;
+}
+
+static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
+{
+ kfree(vc->vc_uni_screen);
+ vc->vc_uni_screen = new_uniscr;
+}
+
+static void vc_uniscr_putc(struct vc_data *vc, char32_t uc)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr)
+ uniscr->lines[vc->vc_y][vc->vc_x] = uc;
+}
+
+static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr) {
+ char32_t *ln = uniscr->lines[vc->vc_y];
+ unsigned int x = vc->vc_x, cols = vc->vc_cols;
+
+ memmove(&ln[x + nr], &ln[x], (cols - x - nr) * sizeof(*ln));
+ memset32(&ln[x], ' ', nr);
+ }
+}
+
+static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr) {
+ char32_t *ln = uniscr->lines[vc->vc_y];
+ unsigned int x = vc->vc_x, cols = vc->vc_cols;
+
+ memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln));
+ memset32(&ln[cols - nr], ' ', nr);
+ }
+}
+
+static void vc_uniscr_clear_line(struct vc_data *vc, unsigned int x,
+ unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr) {
+ char32_t *ln = uniscr->lines[vc->vc_y];
+
+ memset32(&ln[x], ' ', nr);
+ }
+}
+
+static void vc_uniscr_clear_lines(struct vc_data *vc, unsigned int y,
+ unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr) {
+ unsigned int cols = vc->vc_cols;
+
+ while (nr--)
+ memset32(uniscr->lines[y++], ' ', cols);
+ }
+}
+
+static void vc_uniscr_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr) {
+ unsigned int i, j, k, sz, d, clear;
+
+ sz = b - t;
+ clear = b - nr;
+ d = nr;
+ if (dir == SM_DOWN) {
+ clear = t;
+ d = sz - nr;
+ }
+ for (i = 0; i < gcd(d, sz); i++) {
+ char32_t *tmp = uniscr->lines[t + i];
+ j = i;
+ while (1) {
+ k = j + d;
+ if (k >= sz)
+ k -= sz;
+ if (k == i)
+ break;
+ uniscr->lines[t + j] = uniscr->lines[t + k];
+ j = k;
+ }
+ uniscr->lines[t + j] = tmp;
+ }
+ vc_uniscr_clear_lines(vc, clear, nr);
+ }
+}
+
+static void vc_uniscr_copy_area(struct uni_screen *dst,
+ unsigned int dst_cols,
+ unsigned int dst_rows,
+ struct uni_screen *src,
+ unsigned int src_cols,
+ unsigned int src_top_row,
+ unsigned int src_bot_row)
+{
+ unsigned int dst_row = 0;
+
+ if (!dst)
+ return;
+
+ while (src_top_row < src_bot_row) {
+ char32_t *src_line = src->lines[src_top_row];
+ char32_t *dst_line = dst->lines[dst_row];
+
+ memcpy(dst_line, src_line, src_cols * sizeof(char32_t));
+ if (dst_cols - src_cols)
+ memset32(dst_line + src_cols, ' ', dst_cols - src_cols);
+ src_top_row++;
+ dst_row++;
+ }
+ while (dst_row < dst_rows) {
+ char32_t *dst_line = dst->lines[dst_row];
+
+ memset32(dst_line, ' ', dst_cols);
+ dst_row++;
+ }
+}
+
+/*
+ * Called from vcs_read() to make sure unicode screen retrieval is possible.
+ * This will initialize the unicode screen buffer if not already done.
+ * This returns 0 if OK, or a negative error code otherwise.
+ * In particular, -ENODATA is returned if the console is not in UTF-8 mode.
+ */
+int vc_uniscr_check(struct vc_data *vc)
+{
+ struct uni_screen *uniscr;
+ unsigned short *p;
+ int x, y, mask;
+
+ if (__is_defined(NO_VC_UNI_SCREEN))
+ return -EOPNOTSUPP;
+
+ WARN_CONSOLE_UNLOCKED();
+
+ if (!vc->vc_utf)
+ return -ENODATA;
+
+ if (vc->vc_uni_screen)
+ return 0;
+
+ uniscr = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows);
+ if (!uniscr)
+ return -ENOMEM;
+
+ /*
+ * Let's populate it initially with (imperfect) reverse translation.
+ * This is the next best thing we can do short of having it enabled
+ * from the start even when no users rely on this functionality. True
+ * unicode content will be available after a complete screen refresh.
+ */
+ p = (unsigned short *)vc->vc_origin;
+ mask = vc->vc_hi_font_mask | 0xff;
+ for (y = 0; y < vc->vc_rows; y++) {
+ char32_t *line = uniscr->lines[y];
+ for (x = 0; x < vc->vc_cols; x++) {
+ u16 glyph = scr_readw(p++) & mask;
+ line[x] = inverse_translate(vc, glyph, true);
+ }
+ }
+
+ vc->vc_uni_screen = uniscr;
+ return 0;
+}
+
+/*
+ * Called from vcs_read() to get the unicode data from the screen.
+ * This must be preceded by a successful call to vc_uniscr_check() once
+ * the console lock has been taken.
+ */
+void vc_uniscr_copy_line(struct vc_data *vc, void *dest, int viewed,
+ unsigned int row, unsigned int col, unsigned int nr)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+ int offset = row * vc->vc_size_row + col * 2;
+ unsigned long pos;
+
+ BUG_ON(!uniscr);
+
+ pos = (unsigned long)screenpos(vc, offset, viewed);
+ if (pos >= vc->vc_origin && pos < vc->vc_scr_end) {
+ /*
+ * Desired position falls in the main screen buffer.
+ * However the actual row/col might be different if
+ * scrollback is active.
+ */
+ row = (pos - vc->vc_origin) / vc->vc_size_row;
+ col = ((pos - vc->vc_origin) % vc->vc_size_row) / 2;
+ memcpy(dest, &uniscr->lines[row][col], nr * sizeof(char32_t));
+ } else {
+ /*
+ * Scrollback is active. For now let's simply backtranslate
+ * the screen glyphs until the unicode screen buffer does
+ * synchronize with console display drivers for a scrollback
+ * buffer of its own.
+ */
+ u16 *p = (u16 *)pos;
+ int mask = vc->vc_hi_font_mask | 0xff;
+ char32_t *uni_buf = dest;
+ while (nr--) {
+ u16 glyph = scr_readw(p++) & mask;
+ *uni_buf++ = inverse_translate(vc, glyph, true);
+ }
+ }
+}
+
+/* this is for validation and debugging only */
+static void vc_uniscr_debug_check(struct vc_data *vc)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+ unsigned short *p;
+ int x, y, mask;
+
+ if (!VC_UNI_SCREEN_DEBUG || !uniscr)
+ return;
+
+ WARN_CONSOLE_UNLOCKED();
+
+ /*
+ * Make sure our unicode screen translates into the same glyphs
+ * as the actual screen. This is brutal indeed.
+ */
+ p = (unsigned short *)vc->vc_origin;
+ mask = vc->vc_hi_font_mask | 0xff;
+ for (y = 0; y < vc->vc_rows; y++) {
+ char32_t *line = uniscr->lines[y];
+ for (x = 0; x < vc->vc_cols; x++) {
+ u16 glyph = scr_readw(p++) & mask;
+ char32_t uc = line[x];
+ int tc = conv_uni_to_pc(vc, uc);
+ if (tc == -4)
+ tc = conv_uni_to_pc(vc, 0xfffd);
+ if (tc == -4)
+ tc = conv_uni_to_pc(vc, '?');
+ if (tc != glyph)
+ pr_err_ratelimited(
+ "%s: mismatch at %d,%d: glyph=%#x tc=%#x\n",
+ __func__, x, y, glyph, tc);
+ }
+ }
+}
+
+
static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
enum con_scroll dir, unsigned int nr)
{
@@ -326,6 +627,7 @@ static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
nr = b - t - 1;
if (b > vc->vc_rows || t >= b || nr < 1)
return;
+ vc_uniscr_scroll(vc, t, b, dir, nr);
if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr))
return;
@@ -533,6 +835,7 @@ static void insert_char(struct vc_data *vc, unsigned int nr)
{
unsigned short *p = (unsigned short *) vc->vc_pos;
+ vc_uniscr_insert(vc, nr);
scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x - nr) * 2);
scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
vc->vc_need_wrap = 0;
@@ -545,6 +848,7 @@ static void delete_char(struct vc_data *vc, unsigned int nr)
{
unsigned short *p = (unsigned short *) vc->vc_pos;
+ vc_uniscr_delete(vc, nr);
scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2);
scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
nr * 2);
@@ -845,10 +1149,11 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
{
unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
unsigned long end;
- unsigned int old_rows, old_row_size;
+ unsigned int old_rows, old_row_size, first_copied_row;
unsigned int new_cols, new_rows, new_row_size, new_screen_size;
unsigned int user;
unsigned short *newscreen;
+ struct uni_screen *new_uniscr = NULL;
WARN_CONSOLE_UNLOCKED();
@@ -875,6 +1180,14 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
if (!newscreen)
return -ENOMEM;
+ if (get_vc_uniscr(vc)) {
+ new_uniscr = vc_uniscr_alloc(new_cols, new_rows);
+ if (!new_uniscr) {
+ kfree(newscreen);
+ return -ENOMEM;
+ }
+ }
+
if (vc == sel_cons)
clear_selection();
@@ -884,6 +1197,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
err = resize_screen(vc, new_cols, new_rows, user);
if (err) {
kfree(newscreen);
+ kfree(new_uniscr);
return err;
}
@@ -904,18 +1218,24 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
* Cursor near the bottom, copy contents from the
* bottom of buffer
*/
- old_origin += (old_rows - new_rows) * old_row_size;
+ first_copied_row = (old_rows - new_rows);
} else {
/*
* Cursor is in no man's land, copy 1/2 screenful
* from the top and bottom of cursor position
*/
- old_origin += (vc->vc_y - new_rows/2) * old_row_size;
+ first_copied_row = (vc->vc_y - new_rows/2);
}
- }
-
+ old_origin += first_copied_row * old_row_size;
+ } else
+ first_copied_row = 0;
end = old_origin + old_row_size * min(old_rows, new_rows);
+ vc_uniscr_copy_area(new_uniscr, new_cols, new_rows,
+ get_vc_uniscr(vc), rlth/2, first_copied_row,
+ min(old_rows, new_rows));
+ vc_uniscr_set(vc, new_uniscr);
+
update_attr(vc);
while (old_origin < end) {
@@ -1013,6 +1333,7 @@ struct vc_data *vc_deallocate(unsigned int currcons)
vc->vc_sw->con_deinit(vc);
put_pid(vc->vt_pid);
module_put(vc->vc_sw->owner);
+ vc_uniscr_set(vc, NULL);
kfree(vc->vc_screenbuf);
vc_cons[currcons].d = NULL;
}
@@ -1171,15 +1492,22 @@ static void csi_J(struct vc_data *vc, int vpar)
switch (vpar) {
case 0: /* erase from cursor to end of display */
+ vc_uniscr_clear_line(vc, vc->vc_x,
+ vc->vc_cols - vc->vc_x);
+ vc_uniscr_clear_lines(vc, vc->vc_y + 1,
+ vc->vc_rows - vc->vc_y - 1);
count = (vc->vc_scr_end - vc->vc_pos) >> 1;
start = (unsigned short *)vc->vc_pos;
break;
case 1: /* erase from start to cursor */
+ vc_uniscr_clear_line(vc, 0, vc->vc_x + 1);
+ vc_uniscr_clear_lines(vc, 0, vc->vc_y);
count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
start = (unsigned short *)vc->vc_origin;
break;
case 2: /* erase whole display */
case 3: /* (and scrollback buffer later) */
+ vc_uniscr_clear_lines(vc, 0, vc->vc_rows);
count = vc->vc_cols * vc->vc_rows;
start = (unsigned short *)vc->vc_origin;
break;
@@ -1200,25 +1528,27 @@ static void csi_J(struct vc_data *vc, int vpar)
static void csi_K(struct vc_data *vc, int vpar)
{
unsigned int count;
- unsigned short * start;
+ unsigned short *start = (unsigned short *)vc->vc_pos;
+ int offset;
switch (vpar) {
case 0: /* erase from cursor to end of line */
+ offset = 0;
count = vc->vc_cols - vc->vc_x;
- start = (unsigned short *)vc->vc_pos;
break;
case 1: /* erase from start of line to cursor */
- start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
+ offset = -vc->vc_x;
count = vc->vc_x + 1;
break;
case 2: /* erase whole line */
- start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
+ offset = -vc->vc_x;
count = vc->vc_cols;
break;
default:
return;
}
- scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
+ vc_uniscr_clear_line(vc, vc->vc_x + offset, count);
+ scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count);
vc->vc_need_wrap = 0;
if (con_should_update(vc))
do_update_region(vc, (unsigned long) start, count);
@@ -1232,6 +1562,7 @@ static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar posi
vpar++;
count = (vpar > vc->vc_cols - vc->vc_x) ? (vc->vc_cols - vc->vc_x) : vpar;
+ vc_uniscr_clear_line(vc, vc->vc_x, count);
scr_memsetw((unsigned short *)vc->vc_pos, vc->vc_video_erase_char, 2 * count);
if (con_should_update(vc))
vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1, count);
@@ -2188,7 +2519,7 @@ static void con_flush(struct vc_data *vc, unsigned long draw_from,
/* acquires console_lock */
static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
- int c, tc, ok, n = 0, draw_x = -1;
+ int c, next_c, tc, ok, n = 0, draw_x = -1;
unsigned int currcons;
unsigned long draw_from = 0, draw_to = 0;
struct vc_data *vc;
@@ -2382,6 +2713,7 @@ rescan_last_byte:
con_flush(vc, draw_from, draw_to, &draw_x);
}
+ next_c = c;
while (1) {
if (vc->vc_need_wrap || vc->vc_decim)
con_flush(vc, draw_from, draw_to,
@@ -2392,6 +2724,7 @@ rescan_last_byte:
}
if (vc->vc_decim)
insert_char(vc, 1);
+ vc_uniscr_putc(vc, next_c);
scr_writew(himask ?
((vc_attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) :
(vc_attr << 8) + tc,
@@ -2412,6 +2745,7 @@ rescan_last_byte:
tc = conv_uni_to_pc(vc, ' '); /* A space is printed in the second column */
if (tc < 0) tc = ' ';
+ next_c = ' ';
}
notify_write(vc, c);
@@ -2431,6 +2765,7 @@ rescan_last_byte:
do_con_trol(tty, vc, orig);
}
con_flush(vc, draw_from, draw_to, &draw_x);
+ vc_uniscr_debug_check(vc);
console_conditional_schedule();
console_unlock();
notify_update(vc);
@@ -4257,6 +4592,16 @@ u16 screen_glyph(struct vc_data *vc, int offset)
}
EXPORT_SYMBOL_GPL(screen_glyph);
+u32 screen_glyph_unicode(struct vc_data *vc, int n)
+{
+ struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+ if (uniscr)
+ return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols];
+ return inverse_translate(vc, screen_glyph(vc, n * 2), 1);
+}
+EXPORT_SYMBOL_GPL(screen_glyph_unicode);
+
/* used by vcs - note the word offset */
unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed)
{
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index c0ec478ea5bf..fea64f2692a0 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -17,8 +17,8 @@
#include <linux/vt.h>
#include <linux/workqueue.h>
-struct vt_struct;
struct uni_pagedir;
+struct uni_screen;
#define NPAR 16
@@ -140,6 +140,7 @@ struct vc_data {
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
struct uni_pagedir *vc_uni_pagedir;
struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+ struct uni_screen *vc_uni_screen; /* unicode screen content */
bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
/* additional information is in vt_kern.h */
};
@@ -148,7 +149,7 @@ struct vc {
struct vc_data *d;
struct work_struct SAK_work;
- /* might add scrmem, vt_struct, kbd at some time,
+ /* might add scrmem, kbd at some time,
to have everything in one place - the disadvantage
would be that vc_cons etc can no longer be static */
};
diff --git a/include/linux/selection.h b/include/linux/selection.h
index 5b278ce99d8d..a8f5b97b216f 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -32,6 +32,7 @@ extern unsigned char default_blu[];
extern unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed);
extern u16 screen_glyph(struct vc_data *vc, int offset);
+extern u32 screen_glyph_unicode(struct vc_data *vc, int offset);
extern void complement_pos(struct vc_data *vc, int offset);
extern void invert_screen(struct vc_data *vc, int offset, int count, int shift);
@@ -42,4 +43,9 @@ extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
extern void vcs_scr_updated(struct vc_data *vc);
+extern int vc_uniscr_check(struct vc_data *vc);
+extern void vc_uniscr_copy_line(struct vc_data *vc, void *dest, int viewed,
+ unsigned int row, unsigned int col,
+ unsigned int nr);
+
#endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 76b9db71e489..18e21427bce4 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -160,6 +160,9 @@ extern void serial8250_do_shutdown(struct uart_port *port);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
+extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot,
+ unsigned int quot_frac);
extern int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 06ea4eeb09ab..406edae44ca3 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -127,6 +127,13 @@ struct uart_port {
struct ktermios *);
unsigned int (*get_mctrl)(struct uart_port *);
void (*set_mctrl)(struct uart_port *, unsigned int);
+ unsigned int (*get_divisor)(struct uart_port *,
+ unsigned int baud,
+ unsigned int *frac);
+ void (*set_divisor)(struct uart_port *,
+ unsigned int baud,
+ unsigned int quot,
+ unsigned int quot_frac);
int (*startup)(struct uart_port *port);
void (*shutdown)(struct uart_port *port);
void (*throttle)(struct uart_port *port);
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 1ef64d4ad887..840894ca3fc0 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -119,13 +119,13 @@
#include <linux/fs.h>
#include <linux/wait.h>
-
+#include <linux/atomic.h>
/*
* the semaphore definition
*/
struct ld_semaphore {
- long count;
+ atomic_long_t count;
raw_spinlock_t wait_lock;
unsigned int wait_readers;
struct list_head read_wait;
diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h
index ab4108c83186..4846716e7c5c 100644
--- a/include/uapi/linux/keyboard.h
+++ b/include/uapi/linux/keyboard.h
@@ -357,8 +357,29 @@
#define K_DTILDE K(KT_DEAD,3)
#define K_DDIERE K(KT_DEAD,4)
#define K_DCEDIL K(KT_DEAD,5)
+#define K_DMACRON K(KT_DEAD,6)
+#define K_DBREVE K(KT_DEAD,7)
+#define K_DABDOT K(KT_DEAD,8)
+#define K_DABRING K(KT_DEAD,9)
+#define K_DDBACUTE K(KT_DEAD,10)
+#define K_DCARON K(KT_DEAD,11)
+#define K_DOGONEK K(KT_DEAD,12)
+#define K_DIOTA K(KT_DEAD,13)
+#define K_DVOICED K(KT_DEAD,14)
+#define K_DSEMVOICED K(KT_DEAD,15)
+#define K_DBEDOT K(KT_DEAD,16)
+#define K_DHOOK K(KT_DEAD,17)
+#define K_DHORN K(KT_DEAD,18)
+#define K_DSTROKE K(KT_DEAD,19)
+#define K_DABCOMMA K(KT_DEAD,20)
+#define K_DABREVCOMMA K(KT_DEAD,21)
+#define K_DDBGRAVE K(KT_DEAD,22)
+#define K_DINVBREVE K(KT_DEAD,23)
+#define K_DBECOMMA K(KT_DEAD,24)
+#define K_DCURRENCY K(KT_DEAD,25)
+#define K_DGREEK K(KT_DEAD,26)
-#define NR_DEAD 6
+#define NR_DEAD 27
#define K_DOWN K(KT_CUR,0)
#define K_LEFT K(KT_CUR,1)