summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab+huawei@kernel.org>2020-04-28 00:01:49 +0200
committerDavid S. Miller <davem@davemloft.net>2020-04-28 14:40:18 -0700
commit1cec2cacaaec5d53adc04dd3ecfdb687b26c0e89 (patch)
tree89e5f3347d8d28ae4b2826a12f89f4db092f7778
parent355e656e017c3b42deb57d125d86c4cbd277d6db (diff)
downloadlinux-1cec2cacaaec5d53adc04dd3ecfdb687b26c0e89.tar.bz2
docs: networking: convert ip-sysctl.txt to ReST
- add SPDX header; - adjust titles and chapters, adding proper markups; - mark code blocks and literals as such; - mark lists as such; - mark tables as such; - use footnote markup; - adjust identation, whitespaces and blank lines; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt2
-rw-r--r--Documentation/admin-guide/sysctl/net.rst2
-rw-r--r--Documentation/networking/index.rst1
-rw-r--r--Documentation/networking/ip-sysctl.rst (renamed from Documentation/networking/ip-sysctl.txt)831
-rw-r--r--Documentation/networking/snmp_counter.rst2
-rw-r--r--net/Kconfig2
-rw-r--r--net/ipv4/Kconfig2
-rw-r--r--net/ipv4/icmp.c2
8 files changed, 560 insertions, 284 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b23ab11587a6..e37db6f1be64 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4910,7 +4910,7 @@
Set the number of tcp_metrics_hash slots.
Default value is 8192 or 16384 depending on total
ram pages. This is used to specify the TCP metrics
- cache size. See Documentation/networking/ip-sysctl.txt
+ cache size. See Documentation/networking/ip-sysctl.rst
"tcp_no_metrics_save" section for more details.
tdfx= [HW,DRM]
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index e043c9213388..84e3348a9543 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -353,7 +353,7 @@ socket's buffer. It will not take effect unless PF_UNIX flag is specified.
3. /proc/sys/net/ipv4 - IPV4 settings
-------------------------------------
-Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
+Please see: Documentation/networking/ip-sysctl.rst and ipvs-sysctl.txt for
descriptions of these entries.
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 3efb4608649a..7d133d8dbe2a 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -69,6 +69,7 @@ Contents:
ip_dynaddr
iphase
ipsec
+ ip-sysctl
.. only:: subproject and html
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.rst
index 5cdc37c34830..38f811d4b2f0 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.rst
@@ -1,8 +1,15 @@
-/proc/sys/net/ipv4/* Variables:
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+IP Sysctl
+=========
+
+/proc/sys/net/ipv4/* Variables
+==============================
ip_forward - BOOLEAN
- 0 - disabled (default)
- not 0 - enabled
+ - 0 - disabled (default)
+ - not 0 - enabled
Forward Packets between interfaces.
@@ -38,6 +45,7 @@ ip_no_pmtu_disc - INTEGER
could break other protocols.
Possible values: 0-3
+
Default: FALSE
min_pmtu - INTEGER
@@ -51,16 +59,20 @@ ip_forward_use_pmtu - BOOLEAN
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the
case.
+
Default: 0 (disabled)
+
Possible values:
- 0 - disabled
- 1 - enabled
+
+ - 0 - disabled
+ - 1 - enabled
fwmark_reflect - BOOLEAN
Controls the fwmark of kernel-generated IPv4 reply packets that are not
associated with a socket for example, TCP RSTs or ICMP echo replies).
If unset, these packets have a fwmark of zero. If set, they have the
fwmark of the packet they are replying to.
+
Default: 0
fib_multipath_use_neigh - BOOLEAN
@@ -68,63 +80,80 @@ fib_multipath_use_neigh - BOOLEAN
multipath routes. If disabled, neighbor information is not used and
packets could be directed to a failed nexthop. Only valid for kernels
built with CONFIG_IP_ROUTE_MULTIPATH enabled.
+
Default: 0 (disabled)
+
Possible values:
- 0 - disabled
- 1 - enabled
+
+ - 0 - disabled
+ - 1 - enabled
fib_multipath_hash_policy - INTEGER
Controls which hash policy to use for multipath routes. Only valid
for kernels built with CONFIG_IP_ROUTE_MULTIPATH enabled.
+
Default: 0 (Layer 3)
+
Possible values:
- 0 - Layer 3
- 1 - Layer 4
- 2 - Layer 3 or inner Layer 3 if present
+
+ - 0 - Layer 3
+ - 1 - Layer 4
+ - 2 - Layer 3 or inner Layer 3 if present
fib_sync_mem - UNSIGNED INTEGER
Amount of dirty memory from fib entries that can be backlogged before
synchronize_rcu is forced.
- Default: 512kB Minimum: 64kB Maximum: 64MB
+
+ Default: 512kB Minimum: 64kB Maximum: 64MB
ip_forward_update_priority - INTEGER
Whether to update SKB priority from "TOS" field in IPv4 header after it
is forwarded. The new SKB priority is mapped from TOS field value
according to an rt_tos2priority table (see e.g. man tc-prio).
+
Default: 1 (Update priority.)
+
Possible values:
- 0 - Do not update priority.
- 1 - Update priority.
+
+ - 0 - Do not update priority.
+ - 1 - Update priority.
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
+
From linux kernel 3.6 onwards, this is deprecated for ipv4
as route cache is no longer used.
neigh/default/gc_thresh1 - INTEGER
Minimum number of entries to keep. Garbage collector will not
purge entries if there are fewer than this number.
+
Default: 128
neigh/default/gc_thresh2 - INTEGER
Threshold when garbage collector becomes more aggressive about
purging entries. Entries older than 5 seconds will be cleared
when over this number.
+
Default: 512
neigh/default/gc_thresh3 - INTEGER
Maximum number of non-PERMANENT neighbor entries allowed. Increase
this when using large numbers of interfaces and when communicating
with large numbers of directly-connected peers.
+
Default: 1024
neigh/default/unres_qlen_bytes - INTEGER
The maximum number of bytes which may be used by packets
queued for each unresolved address by other network layers.
(added in linux 3.3)
+
Setting negative value is meaningless and will return error.
+
Default: SK_WMEM_MAX, (same as net.core.wmem_default).
+
Exact value depends on architecture and kernel options,
but should be enough to allow queuing 256 packets
of medium size.
@@ -132,11 +161,14 @@ neigh/default/unres_qlen_bytes - INTEGER
neigh/default/unres_qlen - INTEGER
The maximum number of packets which may be queued for each
unresolved address by other network layers.
+
(deprecated in linux 3.3) : use unres_qlen_bytes instead.
+
Prior to linux 3.3, the default value is 3 which may cause
unexpected packet loss. The current default value is calculated
according to default value of unres_qlen_bytes and true size of
packet.
+
Default: 101
mtu_expires - INTEGER
@@ -183,7 +215,8 @@ ipfrag_max_dist - INTEGER
from different IP datagrams, which could result in data corruption.
Default: 64
-INET peer storage:
+INET peer storage
+=================
inet_peer_threshold - INTEGER
The approximate size of the storage. Starting from this threshold
@@ -203,7 +236,8 @@ inet_peer_maxttl - INTEGER
when the number of entries in the pool is very small).
Measured in seconds.
-TCP variables:
+TCP variables
+=============
somaxconn - INTEGER
Limit of socket listen() backlog, known in userspace as SOMAXCONN.
@@ -222,18 +256,22 @@ tcp_adv_win_scale - INTEGER
Count buffering overhead as bytes/2^tcp_adv_win_scale
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
+
Possible values are [-31, 31], inclusive.
+
Default: 1
tcp_allowed_congestion_control - STRING
Show/set the congestion control choices available to non-privileged
processes. The list is a subset of those listed in
tcp_available_congestion_control.
+
Default is "reno" and the default setting (tcp_congestion_control).
tcp_app_win - INTEGER
Reserve max(window/2^tcp_app_win, mss) of window for application
buffer. Value 0 is special, it means that nothing is reserved.
+
Default: 31
tcp_autocorking - BOOLEAN
@@ -244,6 +282,7 @@ tcp_autocorking - BOOLEAN
packet for the flow is waiting in Qdisc queues or device transmit
queue. Applications can still use TCP_CORK for optimal behavior
when they know how/when to uncork their sockets.
+
Default : 1
tcp_available_congestion_control - STRING
@@ -265,6 +304,7 @@ tcp_mtu_probe_floor - INTEGER
tcp_min_snd_mss - INTEGER
TCP SYN and SYNACK messages usually advertise an ADVMSS option,
as described in RFC 1122 and RFC 6691.
+
If this ADVMSS option is smaller than tcp_min_snd_mss,
it is silently capped to tcp_min_snd_mss.
@@ -277,6 +317,7 @@ tcp_congestion_control - STRING
Default is set as part of kernel configuration.
For passive connections, the listener congestion control choice
is inherited.
+
[see setsockopt(listenfd, SOL_TCP, TCP_CONGESTION, "name" ...) ]
tcp_dsack - BOOLEAN
@@ -286,9 +327,12 @@ tcp_early_retrans - INTEGER
Tail loss probe (TLP) converts RTOs occurring due to tail
losses into fast recovery (draft-ietf-tcpm-rack). Note that
TLP requires RACK to function properly (see tcp_recovery below)
+
Possible values:
- 0 disables TLP
- 3 or 4 enables TLP
+
+ - 0 disables TLP
+ - 3 or 4 enables TLP
+
Default: 3
tcp_ecn - INTEGER
@@ -297,12 +341,17 @@ tcp_ecn - INTEGER
support for it. This feature is useful in avoiding losses due
to congestion by allowing supporting routers to signal
congestion before having to drop packets.
+
Possible values are:
- 0 Disable ECN. Neither initiate nor accept ECN.
- 1 Enable ECN when requested by incoming connections and
- also request ECN on outgoing connection attempts.
- 2 Enable ECN when requested by incoming connections
- but do not request ECN on outgoing connections.
+
+ = =====================================================
+ 0 Disable ECN. Neither initiate nor accept ECN.
+ 1 Enable ECN when requested by incoming connections and
+ also request ECN on outgoing connection attempts.
+ 2 Enable ECN when requested by incoming connections
+ but do not request ECN on outgoing connections.
+ = =====================================================
+
Default: 2
tcp_ecn_fallback - BOOLEAN
@@ -312,6 +361,7 @@ tcp_ecn_fallback - BOOLEAN
additional detection mechanisms could be implemented under this
knob. The value is not used, if tcp_ecn or per route (or congestion
control) ECN settings are disabled.
+
Default: 1 (fallback enabled)
tcp_fack - BOOLEAN
@@ -324,7 +374,9 @@ tcp_fin_timeout - INTEGER
valid "receive only" state for an un-orphaned connection, an
orphaned connection in FIN_WAIT_2 state could otherwise wait
forever for the remote to close its end of the connection.
+
Cf. tcp_max_orphans
+
Default: 60 seconds
tcp_frto - INTEGER
@@ -390,7 +442,8 @@ tcp_l3mdev_accept - BOOLEAN
derived from the listen socket to be bound to the L3 domain in
which the packets originated. Only valid when the kernel was
compiled with CONFIG_NET_L3_MASTER_DEV.
- Default: 0 (disabled)
+
+ Default: 0 (disabled)
tcp_low_latency - BOOLEAN
This is a legacy option, it has no effect anymore.
@@ -410,10 +463,14 @@ tcp_max_orphans - INTEGER
tcp_max_syn_backlog - INTEGER
Maximal number of remembered connection requests (SYN_RECV),
which have not received an acknowledgment from connecting client.
+
This is a per-listener limit.
+
The minimal value is 128 for low memory machines, and it will
increase in proportion to the memory of machine.
+
If server suffers from overload, try increasing this number.
+
Remember to also check /proc/sys/net/core/somaxconn
A SYN_RECV request socket consumes about 304 bytes of memory.
@@ -445,7 +502,9 @@ tcp_min_rtt_wlen - INTEGER
minimum RTT when it is moved to a longer path (e.g., due to traffic
engineering). A longer window makes the filter more resistant to RTT
inflations such as transient congestion. The unit is seconds.
+
Possible values: 0 - 86400 (1 day)
+
Default: 300
tcp_moderate_rcvbuf - BOOLEAN
@@ -457,9 +516,10 @@ tcp_moderate_rcvbuf - BOOLEAN
tcp_mtu_probing - INTEGER
Controls TCP Packetization-Layer Path MTU Discovery. Takes three
values:
- 0 - Disabled
- 1 - Disabled by default, enabled when an ICMP black hole detected
- 2 - Always enabled, use initial MSS of tcp_base_mss.
+
+ - 0 - Disabled
+ - 1 - Disabled by default, enabled when an ICMP black hole detected
+ - 2 - Always enabled, use initial MSS of tcp_base_mss.
tcp_probe_interval - UNSIGNED INTEGER
Controls how often to start TCP Packetization-Layer Path MTU
@@ -481,6 +541,7 @@ tcp_no_metrics_save - BOOLEAN
tcp_no_ssthresh_metrics_save - BOOLEAN
Controls whether TCP saves ssthresh metrics in the route cache.
+
Default is 1, which disables ssthresh metrics.
tcp_orphan_retries - INTEGER
@@ -489,6 +550,7 @@ tcp_orphan_retries - INTEGER
See tcp_retries2 for more details.
The default value is 8.
+
If your machine is a loaded WEB server,
you should think about lowering this value, such sockets
may consume significant resources. Cf. tcp_max_orphans.
@@ -497,11 +559,15 @@ tcp_recovery - INTEGER
This value is a bitmap to enable various experimental loss recovery
features.
- RACK: 0x1 enables the RACK loss detection for fast detection of lost
- retransmissions and tail drops. It also subsumes and disables
- RFC6675 recovery for SACK connections.
- RACK: 0x2 makes RACK's reordering window static (min_rtt/4).
- RACK: 0x4 disables RACK's DUPACK threshold heuristic
+ ========= =============================================================
+ RACK: 0x1 enables the RACK loss detection for fast detection of lost
+ retransmissions and tail drops. It also subsumes and disables
+ RFC6675 recovery for SACK connections.
+
+ RACK: 0x2 makes RACK's reordering window static (min_rtt/4).
+
+ RACK: 0x4 disables RACK's DUPACK threshold heuristic
+ ========= =============================================================
Default: 0x1
@@ -509,12 +575,14 @@ tcp_reordering - INTEGER
Initial reordering level of packets in a TCP stream.
TCP stack can then dynamically adjust flow reordering level
between this initial value and tcp_max_reordering
+
Default: 3
tcp_max_reordering - INTEGER
Maximal reordering level of packets in a TCP stream.
300 is a fairly conservative value, but you might increase it
if paths are using per packet load balancing (like bonding rr mode)
+
Default: 300
tcp_retrans_collapse - BOOLEAN
@@ -550,12 +618,14 @@ tcp_rfc1337 - BOOLEAN
If set, the TCP stack behaves conforming to RFC1337. If unset,
we are not conforming to RFC, but prevent TCP TIME_WAIT
assassination.
+
Default: 0
tcp_rmem - vector of 3 INTEGERs: min, default, max
min: Minimal size of receive buffer used by TCP sockets.
It is guaranteed to each TCP socket, even under moderate memory
pressure.
+
Default: 4K
default: initial size of receive buffer used by TCP sockets.
@@ -592,12 +662,14 @@ tcp_slow_start_after_idle - BOOLEAN
window after an idle period. An idle period is defined at
the current RTO. If unset, the congestion window will not
be timed out after an idle period.
+
Default: 1
tcp_stdurg - BOOLEAN
Use the Host requirements interpretation of the TCP urgent pointer field.
Most hosts use the older BSD interpretation, so if you turn this on
Linux might not communicate correctly with them.
+
Default: FALSE
tcp_synack_retries - INTEGER
@@ -646,15 +718,18 @@ tcp_fastopen - INTEGER
the option value being the length of the syn-data backlog.
The values (bitmap) are
- 0x1: (client) enables sending data in the opening SYN on the client.
- 0x2: (server) enables the server support, i.e., allowing data in
+
+ ===== ======== ======================================================
+ 0x1 (client) enables sending data in the opening SYN on the client.
+ 0x2 (server) enables the server support, i.e., allowing data in
a SYN packet to be accepted and passed to the
application before 3-way handshake finishes.
- 0x4: (client) send data in the opening SYN regardless of cookie
+ 0x4 (client) send data in the opening SYN regardless of cookie
availability and without a cookie option.
- 0x200: (server) accept data-in-SYN w/o any cookie option present.
- 0x400: (server) enable all listeners to support Fast Open by
+ 0x200 (server) accept data-in-SYN w/o any cookie option present.
+ 0x400 (server) enable all listeners to support Fast Open by
default without explicit TCP_FASTOPEN socket option.
+ ===== ======== ======================================================
Default: 0x1
@@ -668,6 +743,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
get detected right after Fastopen is re-enabled and will reset to
initial value when the blackhole issue goes away.
0 to disable the blackhole detection.
+
By default, it is set to 1hr.
tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
@@ -698,20 +774,24 @@ tcp_syn_retries - INTEGER
for an active TCP connection attempt will happen after 127seconds.
tcp_timestamps - INTEGER
-Enable timestamps as defined in RFC1323.
- 0: Disabled.
- 1: Enable timestamps as defined in RFC1323 and use random offset for
- each connection rather than only using the current time.
- 2: Like 1, but without random offsets.
+ Enable timestamps as defined in RFC1323.
+
+ - 0: Disabled.
+ - 1: Enable timestamps as defined in RFC1323 and use random offset for
+ each connection rather than only using the current time.
+ - 2: Like 1, but without random offsets.
+
Default: 1
tcp_min_tso_segs - INTEGER
Minimal number of segments per TSO frame.
+
Since linux-3.12, TCP does an automatic sizing of TSO frames,
depending on flow rate, instead of filling 64Kbytes packets.
For specific usages, it's possible to force TCP to build big
TSO frames. Note that TCP stack might split too big TSO packets
if available window is too small.
+
Default: 2
tcp_pacing_ss_ratio - INTEGER
@@ -720,6 +800,7 @@ tcp_pacing_ss_ratio - INTEGER
If TCP is in slow start, tcp_pacing_ss_ratio is applied
to let TCP probe for bigger speeds, assuming cwnd can be
doubled every other RTT.
+
Default: 200
tcp_pacing_ca_ratio - INTEGER
@@ -727,6 +808,7 @@ tcp_pacing_ca_ratio - INTEGER
to current rate. (current_rate = cwnd * mss / srtt)
If TCP is in congestion avoidance phase, tcp_pacing_ca_ratio
is applied to conservatively probe for bigger throughput.
+
Default: 120
tcp_tso_win_divisor - INTEGER
@@ -734,16 +816,20 @@ tcp_tso_win_divisor - INTEGER
can be consumed by a single TSO frame.
The setting of this parameter is a choice between burstiness and
building larger TSO frames.
+
Default: 3
tcp_tw_reuse - INTEGER
Enable reuse of TIME-WAIT sockets for new connections when it is
safe from protocol viewpoint.
- 0 - disable
- 1 - global enable
- 2 - enable for loopback traffic only
+
+ - 0 - disable
+ - 1 - global enable
+ - 2 - enable for loopback traffic only
+
It should not be changed without advice/request of technical
experts.
+
Default: 2
tcp_window_scaling - BOOLEAN
@@ -752,11 +838,14 @@ tcp_window_scaling - BOOLEAN
tcp_wmem - vector of 3 INTEGERs: min, default, max
min: Amount of memory reserved for send buffers for TCP sockets.
Each TCP socket has rights to use it due to fact of its birth.
+
Default: 4K
default: initial size of send buffer used by TCP sockets. This
value overrides net.core.wmem_default used by other protocols.
+
It is usually lower than net.core.wmem_default.
+
Default: 16K
max: Maximal amount of memory allowed for automatically tuned
@@ -764,6 +853,7 @@ tcp_wmem - vector of 3 INTEGERs: min, default, max
net.core.wmem_max. Calling setsockopt() with SO_SNDBUF disables
automatic tuning of that socket's send buffer size, in which case
this value is ignored.
+
Default: between 64K and 4MB, depending on RAM size.
tcp_notsent_lowat - UNSIGNED INTEGER
@@ -784,6 +874,7 @@ tcp_workaround_signed_windows - BOOLEAN
remote TCP is broken and treats the window as a signed quantity.
If unset, assume the remote TCP is not broken even if we do
not receive a window scaling option from them.
+
Default: 0
tcp_thin_linear_timeouts - BOOLEAN
@@ -796,6 +887,7 @@ tcp_thin_linear_timeouts - BOOLEAN
non-aggressive thin streams, often found to be time-dependent.
For more information on thin streams, see
Documentation/networking/tcp-thin.txt
+
Default: 0
tcp_limit_output_bytes - INTEGER
@@ -807,6 +899,7 @@ tcp_limit_output_bytes - INTEGER
flows, for typical pfifo_fast qdiscs. tcp_limit_output_bytes
limits the number of bytes on qdisc or device to reduce artificial
RTT/cwnd and reduce bufferbloat.
+
Default: 1048576 (16 * 65536)
tcp_challenge_ack_limit - INTEGER
@@ -822,7 +915,8 @@ tcp_rx_skb_cache - BOOLEAN
Default: 0 (disabled)
-UDP variables:
+UDP variables
+=============
udp_l3mdev_accept - BOOLEAN
Enabling this option allows a "global" bound socket to work
@@ -830,7 +924,8 @@ udp_l3mdev_accept - BOOLEAN
being received regardless of the L3 domain in which they
originated. Only valid when the kernel was compiled with
CONFIG_NET_L3_MASTER_DEV.
- Default: 0 (disabled)
+
+ Default: 0 (disabled)
udp_mem - vector of 3 INTEGERs: min, pressure, max
Number of pages allowed for queueing by all UDP sockets.
@@ -849,15 +944,18 @@ udp_rmem_min - INTEGER
Minimal size of receive buffer used by UDP sockets in moderation.
Each UDP socket is able to use the size for receiving data, even if
total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
+
Default: 4K
udp_wmem_min - INTEGER
Minimal size of send buffer used by UDP sockets in moderation.
Each UDP socket is able to use the size for sending data, even if
total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
+
Default: 4K
-RAW variables:
+RAW variables
+=============
raw_l3mdev_accept - BOOLEAN
Enabling this option allows a "global" bound socket to work
@@ -865,9 +963,11 @@ raw_l3mdev_accept - BOOLEAN
being received regardless of the L3 domain in which they
originated. Only valid when the kernel was compiled with
CONFIG_NET_L3_MASTER_DEV.
+
Default: 1 (enabled)
-CIPSOv4 Variables:
+CIPSOv4 Variables
+=================
cipso_cache_enable - BOOLEAN
If set, enable additions to and lookups from the CIPSO label mapping
@@ -875,6 +975,7 @@ cipso_cache_enable - BOOLEAN
miss. However, regardless of the setting the cache is still
invalidated when required when means you can safely toggle this on and
off and the cache will always be "safe".
+
Default: 1
cipso_cache_bucket_size - INTEGER
@@ -884,6 +985,7 @@ cipso_cache_bucket_size - INTEGER
more CIPSO label mappings that can be cached. When the number of
entries in a given hash bucket reaches this limit adding new entries
causes the oldest entry in the bucket to be removed to make room.
+
Default: 10
cipso_rbm_optfmt - BOOLEAN
@@ -891,6 +993,7 @@ cipso_rbm_optfmt - BOOLEAN
the CIPSO draft specification (see Documentation/netlabel for details).
This means that when set the CIPSO tag will be padded with empty
categories in order to make the packet data 32-bit aligned.
+
Default: 0
cipso_rbm_structvalid - BOOLEAN
@@ -900,9 +1003,11 @@ cipso_rbm_structvalid - BOOLEAN
where in the CIPSO processing code but setting this to 0 (False) should
result in less work (i.e. it should be faster) but could cause problems
with other implementations that require strict checking.
+
Default: 0
-IP Variables:
+IP Variables
+============
ip_local_port_range - 2 INTEGERS
Defines the local port range that is used by TCP and UDP to
@@ -931,12 +1036,12 @@ ip_local_reserved_ports - list of comma separated ranges
assignments.
You can reserve ports which are not in the current
- ip_local_port_range, e.g.:
+ ip_local_port_range, e.g.::
- $ cat /proc/sys/net/ipv4/ip_local_port_range
- 32000 60999
- $ cat /proc/sys/net/ipv4/ip_local_reserved_ports
- 8080,9148
+ $ cat /proc/sys/net/ipv4/ip_local_port_range
+ 32000 60999
+ $ cat /proc/sys/net/ipv4/ip_local_reserved_ports
+ 8080,9148
although this is redundant. However such a setting is useful
if later the port range is changed to a value that will
@@ -956,6 +1061,7 @@ ip_unprivileged_port_start - INTEGER
ip_nonlocal_bind - BOOLEAN
If set, allows processes to bind() to non-local IP addresses,
which can be quite useful - but may break some applications.
+
Default: 0
ip_autobind_reuse - BOOLEAN
@@ -972,6 +1078,7 @@ ip_dynaddr - BOOLEAN
If set to a non-zero value larger than 1, a kernel log
message will be printed when dynamic address rewriting
occurs.
+
Default: 0
ip_early_demux - BOOLEAN
@@ -981,6 +1088,7 @@ ip_early_demux - BOOLEAN
It may add an additional cost for pure routing workloads that
reduces overall throughput, in such case you should disable it.
+
Default: 1
ping_group_range - 2 INTEGERS
@@ -992,21 +1100,25 @@ ping_group_range - 2 INTEGERS
tcp_early_demux - BOOLEAN
Enable early demux for established TCP sockets.
+
Default: 1
udp_early_demux - BOOLEAN
Enable early demux for connected UDP sockets. Disable this if
your system could experience more unconnected load.
+
Default: 1
icmp_echo_ignore_all - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO
requests sent to it.
+
Default: 0
icmp_echo_ignore_broadcasts - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO and
TIMESTAMP requests sent to it via broadcast/multicast.
+
Default: 1
icmp_ratelimit - INTEGER
@@ -1016,46 +1128,55 @@ icmp_ratelimit - INTEGER
otherwise the minimal space between responses in milliseconds.
Note that another sysctl, icmp_msgs_per_sec limits the number
of ICMP packets sent on all targets.
+
Default: 1000
icmp_msgs_per_sec - INTEGER
Limit maximal number of ICMP packets sent per second from this host.
Only messages whose type matches icmp_ratemask (see below) are
controlled by this limit.
+
Default: 1000
icmp_msgs_burst - INTEGER
icmp_msgs_per_sec controls number of ICMP packets sent per second,
while icmp_msgs_burst controls the burst size of these packets.
+
Default: 50
icmp_ratemask - INTEGER
Mask made of ICMP types for which rates are being limited.
+
Significant bits: IHGFEDCBA9876543210
+
Default mask: 0000001100000011000 (6168)
Bit definitions (see include/linux/icmp.h):
+
+ = =========================
0 Echo Reply
- 3 Destination Unreachable *
- 4 Source Quench *
+ 3 Destination Unreachable [1]_
+ 4 Source Quench [1]_
5 Redirect
8 Echo Request
- B Time Exceeded *
- C Parameter Problem *
+ B Time Exceeded [1]_
+ C Parameter Problem [1]_
D Timestamp Request
E Timestamp Reply
F Info Request
G Info Reply
H Address Mask Request
I Address Mask Reply
+ = =========================
- * These are rate limited by default (see default mask above)
+ .. [1] These are rate limited by default (see default mask above)
icmp_ignore_bogus_error_responses - BOOLEAN
Some routers violate RFC1122 by sending bogus responses to broadcast
frames. Such violations are normally logged via a kernel warning.
If this is set to TRUE, the kernel will not give such warnings, which
will avoid log file clutter.
+
Default: 1
icmp_errors_use_inbound_ifaddr - BOOLEAN
@@ -1100,32 +1221,39 @@ igmp_max_memberships - INTEGER
igmp_max_msf - INTEGER
Maximum number of addresses allowed in the source filter list for a
multicast group.
+
Default: 10
igmp_qrv - INTEGER
Controls the IGMP query robustness variable (see RFC2236 8.1).
+
Default: 2 (as specified by RFC2236 8.1)
+
Minimum: 1 (as specified by RFC6636 4.5)
force_igmp_version - INTEGER
- 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
- allowed. Will back to IGMPv3 mode again if all IGMPv1/v2 Querier
- Present timer expires.
- 1 - Enforce to use IGMP version 1. Will also reply IGMPv1 report if
- receive IGMPv2/v3 query.
- 2 - Enforce to use IGMP version 2. Will fallback to IGMPv1 if receive
- IGMPv1 query message. Will reply report if receive IGMPv3 query.
- 3 - Enforce to use IGMP version 3. The same react with default 0.
+ - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
+ allowed. Will back to IGMPv3 mode again if all IGMPv1/v2 Querier
+ Present timer expires.
+ - 1 - Enforce to use IGMP version 1. Will also reply IGMPv1 report if
+ receive IGMPv2/v3 query.
+ - 2 - Enforce to use IGMP version 2. Will fallback to IGMPv1 if receive
+ IGMPv1 query message. Will reply report if receive IGMPv3 query.
+ - 3 - Enforce to use IGMP version 3. The same react with default 0.
+
+ .. note::
- Note: this is not the same with force_mld_version because IGMPv3 RFC3376
- Security Considerations does not have clear description that we could
- ignore other version messages completely as MLDv2 RFC3810. So make
- this value as default 0 is recommended.
+ this is not the same with force_mld_version because IGMPv3 RFC3376
+ Security Considerations does not have clear description that we could
+ ignore other version messages completely as MLDv2 RFC3810. So make
+ this value as default 0 is recommended.
-conf/interface/* changes special settings per interface (where
-"interface" is the name of your network interface)
+``conf/interface/*``
+ changes special settings per interface (where
+ interface" is the name of your network interface)
-conf/all/* is special, changes the settings for all interfaces
+``conf/all/*``
+ is special, changes the settings for all interfaces
log_martians - BOOLEAN
Log packets with impossible addresses to kernel log.
@@ -1136,14 +1264,21 @@ log_martians - BOOLEAN
accept_redirects - BOOLEAN
Accept ICMP redirect messages.
accept_redirects for the interface will be enabled if:
+
- both conf/{all,interface}/accept_redirects are TRUE in the case
forwarding for the interface is enabled
+
or
+
- at least one of conf/{all,interface}/accept_redirects is TRUE in the
case forwarding for the interface is disabled
+
accept_redirects for the interface will be disabled otherwise
- default TRUE (host)
- FALSE (router)
+
+ default:
+
+ - TRUE (host)
+ - FALSE (router)
forwarding - BOOLEAN
Enable IP forwarding on this interface. This controls whether packets
@@ -1168,12 +1303,14 @@ medium_id - INTEGER
proxy_arp - BOOLEAN
Do proxy arp.
+
proxy_arp for the interface will be enabled if at least one of
conf/{all,interface}/proxy_arp is set to TRUE,
it will be disabled otherwise
proxy_arp_pvlan - BOOLEAN
Private VLAN proxy arp.
+
Basically allow proxy arp replies back to the same interface
(from which the ARP request/solicitation was received).
@@ -1186,6 +1323,7 @@ proxy_arp_pvlan - BOOLEAN
proxy_arp.
This technology is known by different names:
+
In RFC 3069 it is called VLAN Aggregation.
Cisco and Allied Telesyn call it Private VLAN.
Hewlett-Packard call it Source-Port filtering or port-isolation.
@@ -1194,26 +1332,33 @@ proxy_arp_pvlan - BOOLEAN
shared_media - BOOLEAN
Send(router) or accept(host) RFC1620 shared media redirects.
Overrides secure_redirects.
+
shared_media for the interface will be enabled if at least one of
conf/{all,interface}/shared_media is set to TRUE,
it will be disabled otherwise
+
default TRUE
secure_redirects - BOOLEAN
Accept ICMP redirect messages only to gateways listed in the
interface's current gateway list. Even if disabled, RFC1122 redirect
rules still apply.
+
Overridden by shared_media.
+
secure_redirects for the interface will be enabled if at least one of
conf/{all,interface}/secure_redirects is set to TRUE,
it will be disabled otherwise
+
default TRUE
send_redirects - BOOLEAN
Send redirects, if router.
+
send_redirects for the interface will be enabled if at least one of
conf/{all,interface}/send_redirects is set to TRUE,
it will be disabled otherwise
+
Default: TRUE
bootp_relay - BOOLEAN
@@ -1222,15 +1367,20 @@ bootp_relay - BOOLEAN
BOOTP relay daemon will catch and forward such packets.
conf/all/bootp_relay must also be set to TRUE to enable BOOTP relay
for the interface
+
default FALSE
+
Not Implemented Yet.
accept_source_route - BOOLEAN
Accept packets with SRR option.
conf/all/accept_source_route must also be set to TRUE to accept packets
with SRR option on the interface
- default TRUE (router)
- FALSE (host)
+
+ default
+
+ - TRUE (router)
+ - FALSE (host)
accept_local - BOOLEAN
Accept packets with local source addresses. In combination with
@@ -1241,18 +1391,19 @@ accept_local - BOOLEAN
route_localnet - BOOLEAN
Do not consider loopback addresses as martian source or destination
while routing. This enables the use of 127/8 for local routing purposes.
+
default FALSE
rp_filter - INTEGER
- 0 - No source validation.
- 1 - Strict mode as defined in RFC3704 Strict Reverse Path
- Each incoming packet is tested against the FIB and if the interface
- is not the best reverse path the packet check will fail.
- By default failed packets are discarded.
- 2 - Loose mode as defined in RFC3704 Loose Reverse Path
- Each incoming packet's source address is also tested against the FIB
- and if the source address is not reachable via any interface
- the packet check will fail.
+ - 0 - No source validation.
+ - 1 - Strict mode as defined in RFC3704 Strict Reverse Path
+ Each incoming packet is tested against the FIB and if the interface
+ is not the best reverse path the packet check will fail.
+ By default failed packets are discarded.
+ - 2 - Loose mode as defined in RFC3704 Loose Reverse Path
+ Each incoming packet's source address is also tested against the FIB
+ and if the source address is not reachable via any interface
+ the packet check will fail.
Current recommended practice in RFC3704 is to enable strict mode
to prevent IP spoofing from DDos attacks. If using asymmetric routing
@@ -1265,19 +1416,19 @@ rp_filter - INTEGER
in startup scripts.
arp_filter - BOOLEAN
- 1 - Allows you to have multiple network interfaces on the same
- subnet, and have the ARPs for each interface be answered
- based on whether or not the kernel would route a packet from
- the ARP'd IP out that interface (therefore you must use source
- based routing for this to work). In other words it allows control
- of which cards (usually 1) will respond to an arp request.
-
- 0 - (default) The kernel can respond to arp requests with addresses
- from other interfaces. This may seem wrong but it usually makes
- sense, because it increases the chance of successful communication.
- IP addresses are owned by the complete host on Linux, not by
- particular interfaces. Only for more complex setups like load-
- balancing, does this behaviour cause problems.
+ - 1 - Allows you to have multiple network interfaces on the same
+ subnet, and have the ARPs for each interface be answered
+ based on whether or not the kernel would route a packet from
+ the ARP'd IP out that interface (therefore you must use source
+ based routing for this to work). In other words it allows control
+ of which cards (usually 1) will respond to an arp request.
+
+ - 0 - (default) The kernel can respond to arp requests with addresses
+ from other interfaces. This may seem wrong but it usually makes
+ sense, because it increases the chance of successful communication.
+ IP addresses are owned by the complete host on Linux, not by
+ particular interfaces. Only for more complex setups like load-
+ balancing, does this behaviour cause problems.
arp_filter for the interface will be enabled if at least one of
conf/{all,interface}/arp_filter is set to TRUE,
@@ -1287,26 +1438,27 @@ arp_announce - INTEGER
Define different restriction levels for announcing the local
source IP address from IP packets in ARP requests sent on
interface:
- 0 - (default) Use any local address, configured on any interface
- 1 - Try to avoid local addresses that are not in the target's
- subnet for this interface. This mode is useful when target
- hosts reachable via this interface require the source IP
- address in ARP requests to be part of their logical network
- configured on the receiving interface. When we generate the
- request we will check all our subnets that include the
- target IP and will preserve the source address if it is from
- such subnet. If there is no such subnet we select source
- address according to the rules for level 2.
- 2 - Always use the best local address for this target.
- In this mode we ignore the source address in the IP packet
- and try to select local address that we prefer for talks with
- the target host. Such local address is selected by looking
- for primary IP addresses on all our subnets on the outgoing
- interface that include the target IP address. If no suitable
- local address is found we select the first local address
- we have on the outgoing interface or on all other interfaces,
- with the hope we will receive reply for our request and
- even sometimes no matter the source IP address we announce.
+
+ - 0 - (default) Use any local address, configured on any interface
+ - 1 - Try to avoid local addresses that are not in the target's
+ subnet for this interface. This mode is useful when target
+ hosts reachable via this interface require the source IP
+ address in ARP requests to be part of their logical network
+ configured on the receiving interface. When we generate the
+ request we will check all our subnets that include the
+ target IP and will preserve the source address if it is from
+ such subnet. If there is no such subnet we select source
+ address according to the rules for level 2.
+ - 2 - Always use the best local address for this target.
+ In this mode we ignore the source address in the IP packet
+ and try to select local address that we prefer for talks with
+ the target host. Such local address is selected by looking
+ for primary IP addresses on all our subnets on the outgoing
+ interface that include the target IP address. If no suitable
+ local address is found we select the first local address
+ we have on the outgoing interface or on all other interfaces,
+ with the hope we will receive reply for our request and
+ even sometimes no matter the source IP address we announce.
The max value from conf/{all,interface}/arp_announce is used.
@@ -1317,32 +1469,37 @@ arp_announce - INTEGER
arp_ignore - INTEGER
Define different modes for sending replies in response to
received ARP requests that resolve local target IP addresses:
- 0 - (default): reply for any local target IP address, configured
- on any interface
- 1 - reply only if the target IP address is local address
- configured on the incoming interface
- 2 - reply only if the target IP address is local address
- configured on the incoming interface and both with the
- sender's IP address are part from same subnet on this interface
- 3 - do not reply for local addresses configured with scope host,
- only resolutions for global and link addresses are replied
- 4-7 - reserved
- 8 - do not reply for all local addresses
+
+ - 0 - (default): reply for any local target IP address, configured
+ on any interface
+ - 1 - reply only if the target IP address is local address
+ configured on the incoming interface
+ - 2 - reply only if the target IP address is local address
+ configured on the incoming interface and both with the
+ sender's IP address are part from same subnet on this interface
+ - 3 - do not reply for local addresses configured with scope host,
+ only resolutions for global and link addresses are replied
+ - 4-7 - reserved
+ - 8 - do not reply for all local addresses
The max value from conf/{all,interface}/arp_ignore is used
when ARP request is received on the {interface}
arp_notify - BOOLEAN
Define mode for notification of address and device changes.
- 0 - (default): do nothing
- 1 - Generate gratuitous arp requests when device is brought up
- or hardware address changes.
+
+ == ==========================================================
+ 0 (default): do nothing
+ 1 Generate gratuitous arp requests when device is brought up
+ or hardware address changes.
+ == ==========================================================
arp_accept - BOOLEAN
Define behavior for gratuitous ARP frames who's IP is not
already present in the ARP table:
- 0 - don't create new entries in the ARP table
- 1 - create new entries in the ARP table
+
+ - 0 - don't create new entries in the ARP table
+ - 1 - create new entries in the ARP table
Both replies and requests type gratuitous arp will trigger the
ARP table to be updated, if this setting is on.
@@ -1378,11 +1535,13 @@ disable_xfrm - BOOLEAN
igmpv2_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
IGMPv1 or IGMPv2 report retransmit will take place.
+
Default: 10000 (10 seconds)
igmpv3_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
IGMPv3 report retransmit will take place.
+
Default: 1000 (1 seconds)
promote_secondaries - BOOLEAN
@@ -1393,19 +1552,23 @@ promote_secondaries - BOOLEAN
drop_unicast_in_l2_multicast - BOOLEAN
Drop any unicast IP packets that are received in link-layer
multicast (or broadcast) frames.
+
This behavior (for multicast) is actually a SHOULD in RFC
1122, but is disabled by default for compatibility reasons.
+
Default: off (0)
drop_gratuitous_arp - BOOLEAN
Drop all gratuitous ARP frames, for example if there's a known
good ARP proxy on the network and such frames need not be used
(or in the case of 802.11, must not be used to prevent attacks.)
+
Default: off (0)
tag - INTEGER
Allows you to write a number, which can be used as required.
+
Default value is 0.
xfrm4_gc_thresh - INTEGER
@@ -1417,21 +1580,24 @@ xfrm4_gc_thresh - INTEGER
igmp_link_local_mcast_reports - BOOLEAN
Enable IGMP reports for link local multicast groups in the
224.0.0.X range.
+
Default TRUE
Alexey Kuznetsov.
kuznet@ms2.inr.ac.ru
Updated by:
-Andi Kleen
-ak@muc.de
-Nicolas Delon
-delon.nicolas@wanadoo.fr
+- Andi Kleen
+ ak@muc.de
+- Nicolas Delon
+ delon.nicolas@wanadoo.fr
-/proc/sys/net/ipv6/* Variables:
+
+/proc/sys/net/ipv6/* Variables
+==============================
IPv6 has no global variables such as tcp_*. tcp_* settings under ipv4/ also
apply to IPv6 [XXX?].
@@ -1440,8 +1606,9 @@ bindv6only - BOOLEAN
Default value for IPV6_V6ONLY socket option,
which restricts use of the IPv6 socket to IPv6 communication
only.
- TRUE: disable IPv4-mapped address feature
- FALSE: enable IPv4-mapped address feature
+
+ - TRUE: disable IPv4-mapped address feature
+ - FALSE: enable IPv4-mapped address feature
Default: FALSE (as specified in RFC3493)
@@ -1449,8 +1616,10 @@ flowlabel_consistency - BOOLEAN
Protect the consistency (and unicity) of flow label.
You have to disable it to use IPV6_FL_F_REFLECT flag on the
flow label manager.
- TRUE: enabled
- FALSE: disabled
+
+ - TRUE: enabled
+ - FALSE: disabled
+
Default: TRUE
auto_flowlabels - INTEGER
@@ -1458,22 +1627,28 @@ auto_flowlabels - INTEGER
packet. This allows intermediate devices, such as routers, to
identify packet flows for mechanisms like Equal Cost Multipath
Routing (see RFC 6438).
- 0: automatic flow labels are completely disabled
- 1: automatic flow labels are enabled by default, they can be
+
+ = ===========================================================
+ 0 automatic flow labels are completely disabled
+ 1 automatic flow labels are enabled by default, they can be
disabled on a per socket basis using the IPV6_AUTOFLOWLABEL
socket option
- 2: automatic flow labels are allowed, they may be enabled on a
+ 2 automatic flow labels are allowed, they may be enabled on a
per socket basis using the IPV6_AUTOFLOWLABEL socket option
- 3: automatic flow labels are enabled and enforced, they cannot
+ 3 automatic flow labels are enabled and enforced, they cannot
be disabled by the socket option
+ = ===========================================================
+
Default: 1
flowlabel_state_ranges - BOOLEAN
Split the flow label number space into two ranges. 0-0x7FFFF is
reserved for the IPv6 flow manager facility, 0x80000-0xFFFFF
is reserved for stateless flow labels as described in RFC6437.
- TRUE: enabled
- FALSE: disabled
+
+ - TRUE: enabled
+ - FALSE: disabled
+
Default: true
flowlabel_reflect - INTEGER
@@ -1483,49 +1658,59 @@ flowlabel_reflect - INTEGER
https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
This is a bitmask.
- 1: enabled for established flows
- Note that this prevents automatic flowlabel changes, as done
- in "tcp: change IPv6 flow-label upon receiving spurious retransmission"
- and "tcp: Change txhash on every SYN and RTO retransmit"
+ - 1: enabled for established flows
+
+ Note that this prevents automatic flowlabel changes, as done
+ in "tcp: change IPv6 flow-label upon receiving spurious retransmission"
+ and "tcp: Change txhash on every SYN and RTO retransmit"
- 2: enabled for TCP RESET packets (no active listener)
- If set, a RST packet sent in response to a SYN packet on a closed
- port will reflect the incoming flow label.
+ - 2: enabled for TCP RESET packets (no active listener)
+ If set, a RST packet sent in response to a SYN packet on a closed
+ port will reflect the incoming flow label.
- 4: enabled for ICMPv6 echo reply messages.
+ - 4: enabled for ICMPv6 echo reply messages.
Default: 0
fib_multipath_hash_policy - INTEGER
Controls which hash policy to use for multipath routes.
+
Default: 0 (Layer 3)
+
Possible values:
- 0 - Layer 3 (source and destination addresses plus flow label)
- 1 - Layer 4 (standard 5-tuple)
- 2 - Layer 3 or inner Layer 3 if present
+
+ - 0 - Layer 3 (source and destination addresses plus flow label)
+ - 1 - Layer 4 (standard 5-tuple)
+ - 2 - Layer 3 or inner Layer 3 if present
anycast_src_echo_reply - BOOLEAN
Controls the use of anycast addresses as source addresses for ICMPv6
echo reply
- TRUE: enabled
- FALSE: disabled
+
+ - TRUE: enabled
+ - FALSE: disabled
+
Default: FALSE
idgen_delay - INTEGER
Controls the delay in seconds after which time to retry
privacy stable address generation if a DAD conflict is
detected.
+
Default: 1 (as specified in RFC7217)
idgen_retries - INTEGER
Controls the number of retries to generate a stable privacy
address if a DAD conflict is detected.
+
Default: 3 (as specified in RFC7217)
mld_qrv - INTEGER
Controls the MLD query robustness variable (see RFC3810 9.1).
+
Default: 2 (as specified by RFC3810 9.1)
+
Minimum: 1 (as specified by RFC6636 4.5)
max_dst_opts_number - INTEGER
@@ -1533,6 +1718,7 @@ max_dst_opts_number - INTEGER
options extension header. If this value is less than zero
then unknown options are disallowed and the number of known
TLVs allowed is the absolute value of this number.
+
Default: 8
max_hbh_opts_number - INTEGER
@@ -1540,16 +1726,19 @@ max_hbh_opts_number - INTEGER
options extension header. If this value is less than zero
then unknown options are disallowed and the number of known
TLVs allowed is the absolute value of this number.
+
Default: 8
max_dst_opts_length - INTEGER
Maximum length allowed for a Destination options extension
header.
+
Default: INT_MAX (unlimited)
max_hbh_length - INTEGER
Maximum length allowed for a Hop-by-Hop options extension
header.
+
Default: INT_MAX (unlimited)
skip_notify_on_dev_down - BOOLEAN
@@ -1558,6 +1747,7 @@ skip_notify_on_dev_down - BOOLEAN
generate this message; IPv6 does by default. Setting this sysctl
to true skips the message, making IPv4 and IPv6 on par in relying
on userspace caches to track link events and evict routes.
+
Default: false (generate message)
nexthop_compat_mode - BOOLEAN
@@ -1592,18 +1782,20 @@ seg6_flowlabel - INTEGER
Controls the behaviour of computing the flowlabel of outer
IPv6 header in case of SR T.encaps
- -1 set flowlabel to zero.
- 0 copy flowlabel from Inner packet in case of Inner IPv6
- (Set flowlabel to 0 in case IPv4/L2)
- 1 Compute the flowlabel using seg6_make_flowlabel()
+ == =======================================================
+ -1 set flowlabel to zero.
+ 0 copy flowlabel from Inner packet in case of Inner IPv6
+ (Set flowlabel to 0 in case IPv4/L2)
+ 1 Compute the flowlabel using seg6_make_flowlabel()
+ == =======================================================
Default is 0.
-conf/default/*:
+``conf/default/*``:
Change the interface-specific default settings.
-conf/all/*:
+``conf/all/*``:
Change all the interface-specific settings.
[XXX: Other special features than forwarding?]
@@ -1627,9 +1819,10 @@ fwmark_reflect - BOOLEAN
associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
If unset, these packets have a fwmark of zero. If set, they have the
fwmark of the packet they are replying to.
+
Default: 0
-conf/interface/*:
+``conf/interface/*``:
Change special settings per interface.
The functional behaviour for certain settings is different
@@ -1644,31 +1837,40 @@ accept_ra - INTEGER
transmitted.
Possible values are:
- 0 Do not accept Router Advertisements.
- 1 Accept Router Advertisements if forwarding is disabled.
- 2 Overrule forwarding behaviour. Accept Router Advertisements
- even if forwarding is enabled.
- Functional default: enabled if local forwarding is disabled.
- disabled if local forwarding is enabled.
+ == ===========================================================
+ 0 Do not accept Router Advertisements.
+ 1 Accept Router Advertisements if forwarding is disabled.
+ 2 Overrule forwarding behaviour. Accept Router Advertisements
+ even if forwarding is enabled.
+ == ===========================================================
+
+ Functional default:
+
+ - enabled if local forwarding is disabled.
+ - disabled if local forwarding is enabled.
accept_ra_defrtr - BOOLEAN
Learn default router in Router Advertisement.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default:
+
+ - enabled if accept_ra is enabled.
+ - disabled if accept_ra is disabled.
accept_ra_from_local - BOOLEAN
Accept RA with source-address that is found on local machine
- if the RA is otherwise proper and able to be accepted.
- Default is to NOT accept these as it may be an un-intended
- network loop.
+ if the RA is otherwise proper and able to be accepted.
+
+ Default is to NOT accept these as it may be an un-intended
+ network loop.
Functional default:
- enabled if accept_ra_from_local is enabled
- on a specific interface.
- disabled if accept_ra_from_local is disabled
- on a specific interface.
+
+ - enabled if accept_ra_from_local is enabled
+ on a specific interface.
+ - disabled if accept_ra_from_local is disabled
+ on a specific interface.
accept_ra_min_hop_limit - INTEGER
Minimum hop limit Information in Router Advertisement.
@@ -1681,8 +1883,10 @@ accept_ra_min_hop_limit - INTEGER
accept_ra_pinfo - BOOLEAN
Learn Prefix Information in Router Advertisement.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default:
+
+ - enabled if accept_ra is enabled.
+ - disabled if accept_ra is disabled.
accept_ra_rt_info_min_plen - INTEGER
Minimum prefix length of Route Information in RA.
@@ -1690,8 +1894,10 @@ accept_ra_rt_info_min_plen - INTEGER
Route Information w/ prefix smaller than this variable shall
be ignored.
- Functional default: 0 if accept_ra_rtr_pref is enabled.
- -1 if accept_ra_rtr_pref is disabled.
+ Functional default:
+
+ * 0 if accept_ra_rtr_pref is enabled.
+ * -1 if accept_ra_rtr_pref is disabled.
accept_ra_rt_info_max_plen - INTEGER
Maximum prefix length of Route Information in RA.
@@ -1699,33 +1905,41 @@ accept_ra_rt_info_max_plen - INTEGER
Route Information w/ prefix larger than this variable shall
be ignored.
- Functional default: 0 if accept_ra_rtr_pref is enabled.
- -1 if accept_ra_rtr_pref is disabled.
+ Functional default:
+
+ * 0 if accept_ra_rtr_pref is enabled.
+ * -1 if accept_ra_rtr_pref is disabled.
accept_ra_rtr_pref - BOOLEAN
Accept Router Preference in RA.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default:
+
+ - enabled if accept_ra is enabled.
+ - disabled if accept_ra is disabled.
accept_ra_mtu - BOOLEAN
Apply the MTU value specified in RA option 5 (RFC4861). If
disabled, the MTU specified in the RA will be ignored.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default:
+
+ - enabled if accept_ra is enabled.
+ - disabled if accept_ra is disabled.
accept_redirects - BOOLEAN
Accept Redirects.
- Functional default: enabled if local forwarding is disabled.
- disabled if local forwarding is enabled.
+ Functional default:
+
+ - enabled if local forwarding is disabled.
+ - disabled if local forwarding is enabled.
accept_source_route - INTEGER
Accept source routing (routing extension header).
- >= 0: Accept only routing header type 2.
- < 0: Do not accept routing header.
+ - >= 0: Accept only routing header type 2.
+ - < 0: Do not accept routing header.
Default: 0
@@ -1733,24 +1947,30 @@ autoconf - BOOLEAN
Autoconfigure addresses using Prefix Information in Router
Advertisements.
- Functional default: enabled if accept_ra_pinfo is enabled.
- disabled if accept_ra_pinfo is disabled.
+ Functional default:
+
+ - enabled if accept_ra_pinfo is enabled.
+ - disabled if accept_ra_pinfo is disabled.
dad_transmits - INTEGER
The amount of Duplicate Address Detection probes to send.
+
Default: 1
forwarding - INTEGER
Configure interface-specific Host/Router behaviour.
- Note: It is recommended to have the same setting on all
- interfaces; mixed router/host scenarios are rather uncommon.
+ .. note::
+
+ It is recommended to have the same setting on all
+ interfaces; mixed router/host scenarios are rather uncommon.
Possible values are:
- 0 Forwarding disabled
- 1 Forwarding enabled
- FALSE (0):
+ - 0 Forwarding disabled
+ - 1 Forwarding enabled
+
+ **FALSE (0)**:
By default, Host behaviour is assumed. This means:
@@ -1761,7 +1981,7 @@ forwarding - INTEGER
Advertisements (and do autoconfiguration).
4. If accept_redirects is TRUE (default), accept Redirects.
- TRUE (1):
+ **TRUE (1)**:
If local forwarding is enabled, Router behaviour is assumed.
This means exactly the reverse from the above:
@@ -1772,19 +1992,22 @@ forwarding - INTEGER
4. Redirects are ignored.
Default: 0 (disabled) if global forwarding is disabled (default),
- otherwise 1 (enabled).
+ otherwise 1 (enabled).
hop_limit - INTEGER
Default Hop Limit to set.
+
Default: 64
mtu - INTEGER
Default Maximum Transfer Unit
+
Default: 1280 (IPv6 required minimum)
ip_nonlocal_bind - BOOLEAN
If set, allows processes to bind() to non-local IPv6 addresses,
which can be quite useful - but may break some applications.
+
Default: 0
router_probe_interval - INTEGER
@@ -1796,15 +2019,18 @@ router_probe_interval - INTEGER
router_solicitation_delay - INTEGER
Number of seconds to wait after interface is brought up
before sending Router Solicitations.
+
Default: 1
router_solicitation_interval - INTEGER
Number of seconds to wait between Router Solicitations.
+
Default: 4
router_solicitations - INTEGER
Number of Router Solicitations to send until assuming no
routers are present.
+
Default: 3
use_oif_addrs_only - BOOLEAN
@@ -1816,28 +2042,35 @@ use_oif_addrs_only - BOOLEAN
use_tempaddr - INTEGER
Preference for Privacy Extensions (RFC3041).
- <= 0 : disable Privacy Extensions
- == 1 : enable Privacy Extensions, but prefer public
- addresses over temporary addresses.
- > 1 : enable Privacy Extensions and prefer temporary
- addresses over public addresses.
- Default: 0 (for most devices)
- -1 (for point-to-point devices and loopback devices)
+
+ * <= 0 : disable Privacy Extensions
+ * == 1 : enable Privacy Extensions, but prefer public
+ addresses over temporary addresses.
+ * > 1 : enable Privacy Extensions and prefer temporary
+ addresses over public addresses.
+
+ Default:
+
+ * 0 (for most devices)
+ * -1 (for point-to-point devices and loopback devices)
temp_valid_lft - INTEGER
valid lifetime (in seconds) for temporary addresses.
+
Default: 604800 (7 days)
temp_prefered_lft - INTEGER
Preferred lifetime (in seconds) for temporary addresses.
+
Default: 86400 (1 day)
keep_addr_on_down - INTEGER
Keep all IPv6 addresses on an interface down event. If set static
global addresses with no expiration time are not flushed.
- >0 : enabled
- 0 : system default
- <0 : disabled
+
+ * >0 : enabled
+ * 0 : system default
+ * <0 : disabled
Default: 0 (addresses are removed)
@@ -1846,11 +2079,13 @@ max_desync_factor - INTEGER
that ensures that clients don't synchronize with each
other and generate new addresses at exactly the same time.
value is in seconds.
+
Default: 600
regen_max_retry - INTEGER
Number of attempts before give up attempting to generate
valid temporary addresses.
+
Default: 5
max_addresses - INTEGER
@@ -1858,12 +2093,14 @@ max_addresses - INTEGER
to zero disables the limitation. It is not recommended to set this
value too large (or to zero) because it would be an easy way to
crash the kernel by allowing too many addresses to be created.
+
Default: 16
disable_ipv6 - BOOLEAN
Disable IPv6 operation. If accept_dad is set to 2, this value
will be dynamically set to TRUE if DAD fails for the link-local
address.
+
Default: FALSE (enable IPv6 operation)
When this value is changed from 1 to 0 (IPv6 is being enabled),
@@ -1877,10 +2114,13 @@ disable_ipv6 - BOOLEAN
accept_dad - INTEGER
Whether to accept DAD (Duplicate Address Detection).
- 0: Disable DAD
- 1: Enable DAD (default)
- 2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
- link-local address has been found.
+
+ == ==============================================================
+ 0 Disable DAD
+ 1 Enable DAD (default)
+ 2 Enable DAD, and disable IPv6 operation if MAC-based duplicate
+ link-local address has been found.
+ == ==============================================================
DAD operation and mode on a given interface will be selected according
to the maximum value of conf/{all,interface}/accept_dad.
@@ -1888,6 +2128,7 @@ accept_dad - INTEGER
force_tllao - BOOLEAN
Enable sending the target link-layer address option even when
responding to a unicast neighbor solicitation.
+
Default: FALSE
Quoting from RFC 2461, section 4.4, Target link-layer address:
@@ -1905,9 +2146,10 @@ force_tllao - BOOLEAN
ndisc_notify - BOOLEAN
Define mode for notification of address and device changes.
- 0 - (default): do nothing
- 1 - Generate unsolicited neighbour advertisements when device is brought
- up or hardware address changes.
+
+ * 0 - (default): do nothing
+ * 1 - Generate unsolicited neighbour advertisements when device is brought
+ up or hardware address changes.
ndisc_tclass - INTEGER
The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
@@ -1916,33 +2158,38 @@ ndisc_tclass - INTEGER
These 8 bits can be interpreted as 6 high order bits holding the DSCP
value and 2 low order bits representing ECN (which you probably want
to leave cleared).
- 0 - (default)
+
+ * 0 - (default)
mldv1_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
MLDv1 report retransmit will take place.
+
Default: 10000 (10 seconds)
mldv2_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
MLDv2 report retransmit will take place.
+
Default: 1000 (1 second)
force_mld_version - INTEGER
- 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
- 1 - Enforce to use MLD version 1
- 2 - Enforce to use MLD version 2
+ * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
+ * 1 - Enforce to use MLD version 1
+ * 2 - Enforce to use MLD version 2
suppress_frag_ndisc - INTEGER
Control RFC 6980 (Security Implications of IPv6 Fragmentation
with IPv6 Neighbor Discovery) behavior:
- 1 - (default) discard fragmented neighbor discovery packets
- 0 - allow fragmented neighbor discovery packets
+
+ * 1 - (default) discard fragmented neighbor discovery packets
+ * 0 - allow fragmented neighbor discovery packets
optimistic_dad - BOOLEAN
Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
- 0: disabled (default)
- 1: enabled
+
+ * 0: disabled (default)
+ * 1: enabled
Optimistic Duplicate Address Detection for the interface will be enabled
if at least one of conf/{all,interface}/optimistic_dad is set to 1,
@@ -1953,8 +2200,9 @@ use_optimistic - BOOLEAN
source address selection. Preferred addresses will still be chosen
before optimistic addresses, subject to other ranking in the source
address selection algorithm.
- 0: disabled (default)
- 1: enabled
+
+ * 0: disabled (default)
+ * 1: enabled
This will be enabled if at least one of
conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
@@ -1976,12 +2224,14 @@ stable_secret - IPv6 address
addr_gen_mode - INTEGER
Defines how link-local and autoconf addresses are generated.
- 0: generate address based on EUI64 (default)
- 1: do no generate a link-local address, use EUI64 for addresses generated
- from autoconf
- 2: generate stable privacy addresses, using the secret from
+ = =================================================================
+ 0 generate address based on EUI64 (default)
+ 1 do no generate a link-local address, use EUI64 for addresses
+ generated from autoconf
+ 2 generate stable privacy addresses, using the secret from
stable_secret (RFC7217)
- 3: generate stable privacy addresses, using a random secret if unset
+ 3 generate stable privacy addresses, using a random secret if unset
+ = =================================================================
drop_unicast_in_l2_multicast - BOOLEAN
Drop any unicast IPv6 packets that are received in link-layer
@@ -2003,13 +2253,18 @@ enhanced_dad - BOOLEAN
detection of duplicates due to loopback of the NS messages that we send.
The nonce option will be sent on an interface unless both of
conf/{all,interface}/enhanced_dad are set to FALSE.
+
Default: TRUE
-icmp/*:
+``icmp/*``:
+===========
+
ratelimit - INTEGER
Limit the maximal rates for sending ICMPv6 messages.
+
0 to disable any limiting,
otherwise the minimal space between responses in milliseconds.
+
Default: 1000
ratemask - list of comma separated ranges
@@ -2030,16 +2285,19 @@ ratemask - list of comma separated ranges
echo_ignore_all - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO
requests sent to it over the IPv6 protocol.
+
Default: 0
echo_ignore_multicast - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO
requests sent to it over the IPv6 protocol via multicast.
+
Default: 0
echo_ignore_anycast - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO
requests sent to it over the IPv6 protocol destined to anycast address.
+
Default: 0
xfrm6_gc_thresh - INTEGER
@@ -2055,43 +2313,52 @@ YOSHIFUJI Hideaki / USAGI Project <yoshfuji@linux-ipv6.org>
/proc/sys/net/bridge/* Variables:
+=================================
bridge-nf-call-arptables - BOOLEAN
- 1 : pass bridged ARP traffic to arptables' FORWARD chain.
- 0 : disable this.
+ - 1 : pass bridged ARP traffic to arptables' FORWARD chain.
+ - 0 : disable this.
+
Default: 1
bridge-nf-call-iptables - BOOLEAN
- 1 : pass bridged IPv4 traffic to iptables' chains.
- 0 : disable this.
+ - 1 : pass bridged IPv4 traffic to iptables' chains.
+ - 0 : disable this.
+
Default: 1
bridge-nf-call-ip6tables - BOOLEAN
- 1 : pass bridged IPv6 traffic to ip6tables' chains.
- 0 : disable this.
+ - 1 : pass bridged IPv6 traffic to ip6tables' chains.
+ - 0 : disable this.
+
Default: 1
bridge-nf-filter-vlan-tagged - BOOLEAN
- 1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
- 0 : disable this.
+ - 1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
+ - 0 : disable this.
+
Default: 0
bridge-nf-filter-pppoe-tagged - BOOLEAN
- 1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
- 0 : disable this.
+ - 1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
+ - 0 : disable this.
+
Default: 0
bridge-nf-pass-vlan-input-dev - BOOLEAN
- 1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
- interface on the bridge and set the netfilter input device to the vlan.
- This allows use of e.g. "iptables -i br0.1" and makes the REDIRECT
- target work with vlan-on-top-of-bridge interfaces. When no matching
- vlan interface is found, or this switch is off, the input device is
- set to the bridge interface.
- 0: disable bridge netfilter vlan interface lookup.
+ - 1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
+ interface on the bridge and set the netfilter input device to the
+ vlan. This allows use of e.g. "iptables -i br0.1" and makes the
+ REDIRECT target work with vlan-on-top-of-bridge interfaces. When no
+ matching vlan interface is found, or this switch is off, the input
+ device is set to the bridge interface.
+
+ - 0: disable bridge netfilter vlan interface lookup.
+
Default: 0
-proc/sys/net/sctp/* Variables:
+``proc/sys/net/sctp/*`` Variables:
+==================================
addip_enable - BOOLEAN
Enable or disable extension of Dynamic Address Reconfiguration
@@ -2156,11 +2423,13 @@ addip_noauth_enable - BOOLEAN
we provide this variable to control the enforcement of the
authentication requirement.
- 1: Allow ADD-IP extension to be used without authentication. This
+ == ===============================================================
+ 1 Allow ADD-IP extension to be used without authentication. This
should only be set in a closed environment for interoperability
with older implementations.
- 0: Enforce the authentication requirement
+ 0 Enforce the authentication requirement
+ == ===============================================================
Default: 0
@@ -2170,8 +2439,8 @@ auth_enable - BOOLEAN
required for secure operation of Dynamic Address Reconfiguration
(ADD-IP) extension.
- 1: Enable this extension.
- 0: Disable this extension.
+ - 1: Enable this extension.
+ - 0: Disable this extension.
Default: 0
@@ -2179,8 +2448,8 @@ prsctp_enable - BOOLEAN
Enable or disable the Partial Reliability extension (RFC3758) which
is used to notify peers that a given DATA should no longer be expected.
- 1: Enable extension
- 0: Disable
+ - 1: Enable extension
+ - 0: Disable
Default: 1
@@ -2282,8 +2551,8 @@ cookie_preserve_enable - BOOLEAN
Enable or disable the ability to extend the lifetime of the SCTP cookie
that is used during the establishment phase of SCTP association
- 1: Enable cookie lifetime extension.
- 0: Disable
+ - 1: Enable cookie lifetime extension.
+ - 0: Disable
Default: 1
@@ -2291,9 +2560,11 @@ cookie_hmac_alg - STRING
Select the hmac algorithm used when generating the cookie value sent by
a listening sctp socket to a connecting client in the INIT-ACK chunk.
Valid values are:
+
* md5
* sha1
* none
+
Ability to assign md5 or sha1 as the selected alg is predicated on the
configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
CONFIG_CRYPTO_SHA1).
@@ -2312,16 +2583,16 @@ rcvbuf_policy - INTEGER
to each association instead of the socket. This prevents the described
blocking.
- 1: rcvbuf space is per association
- 0: rcvbuf space is per socket
+ - 1: rcvbuf space is per association
+ - 0: rcvbuf space is per socket
Default: 0
sndbuf_policy - INTEGER
Similar to rcvbuf_policy above, this applies to send buffer space.
- 1: Send buffer is tracked per association
- 0: Send buffer is tracked per socket.
+ - 1: Send buffer is tracked per association
+ - 0: Send buffer is tracked per socket.
Default: 0
@@ -2354,19 +2625,23 @@ sctp_wmem - vector of 3 INTEGERs: min, default, max
addr_scope_policy - INTEGER
Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
- 0 - Disable IPv4 address scoping
- 1 - Enable IPv4 address scoping
- 2 - Follow draft but allow IPv4 private addresses
- 3 - Follow draft but allow IPv4 link local addresses
+ - 0 - Disable IPv4 address scoping
+ - 1 - Enable IPv4 address scoping
+ - 2 - Follow draft but allow IPv4 private addresses
+ - 3 - Follow draft but allow IPv4 link local addresses
Default: 1
-/proc/sys/net/core/*
+``/proc/sys/net/core/*``
+========================
+
Please see: Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
-/proc/sys/net/unix/*
+``/proc/sys/net/unix/*``
+========================
+
max_dgram_qlen - INTEGER
The maximum length of dgram socket receive queue
diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst
index 10e11099e74a..4edd0d38779e 100644
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@@ -792,7 +792,7 @@ counters to indicate the ACK is skipped in which scenario. The ACK
would only be skipped if the received packet is either a SYN packet or
it has no data.
-.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
+.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.rst
* TcpExtTCPACKSkippedSynRecv
diff --git a/net/Kconfig b/net/Kconfig
index df8d8c9bd021..8b1f85820a6b 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -86,7 +86,7 @@ config INET
"Sysctl support" below, you can change various aspects of the
behavior of the TCP/IP code by writing to the (virtual) files in
/proc/sys/net/ipv4/*; the options are explained in the file
- <file:Documentation/networking/ip-sysctl.txt>.
+ <file:Documentation/networking/ip-sysctl.rst>.
Short answer: say Y.
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 25a8888826b8..5da4733067fb 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -49,7 +49,7 @@ config IP_ADVANCED_ROUTER
Note that some distributions enable it in startup scripts.
For details about rp_filter strict and loose mode read
- <file:Documentation/networking/ip-sysctl.txt>.
+ <file:Documentation/networking/ip-sysctl.rst>.
If unsure, say N here.
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index fc61f51d87a3..956a806649f7 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -853,7 +853,7 @@ static bool icmp_unreach(struct sk_buff *skb)
case ICMP_FRAG_NEEDED:
/* for documentation of the ip_no_pmtu_disc
* values please see
- * Documentation/networking/ip-sysctl.txt
+ * Documentation/networking/ip-sysctl.rst
*/
switch (net->ipv4.sysctl_ip_no_pmtu_disc) {
default: