summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2019-09-29 11:19:25 -0700
committerOlof Johansson <olof@lixom.net>2019-09-29 11:20:48 -0700
commit9bfd7319e8d353b8b81c4cfd4d7eced71adbfbb5 (patch)
tree862e64535dab42603f79d3d7969ceeb74c8e6269
parenta4207a1c5edc3112b3538769024c7b2ad42b9fe9 (diff)
parenta4c8723a162e6244fb01944fbf446750575dba59 (diff)
downloadlinux-9bfd7319e8d353b8b81c4cfd4d7eced71adbfbb5.tar.bz2
Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
-rw-r--r--arch/arm/boot/dts/am3517-evm.dts23
-rw-r--r--arch/arm/boot/dts/logicpd-som-lv.dtsi26
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi37
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c4
-rw-r--r--drivers/bus/ti-sysc.c52
6 files changed, 64 insertions, 79 deletions
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index ebfe28c2f544..a1fd3e63e86e 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -124,10 +124,11 @@
};
lcd0: display@0 {
- compatible = "panel-dpi";
+ /* This isn't the exact LCD, but the timings meet spec */
+ /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
label = "15";
- status = "okay";
- pinctrl-names = "default";
+ backlight = <&bl>;
enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
vcc-supply = <&vdd_io_reg>;
@@ -136,22 +137,6 @@
remote-endpoint = <&dpi_out>;
};
};
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <4>;
- vsync-len = <11>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
};
bl: backlight {
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 5563ee54c960..b56524cc7fe2 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -228,6 +228,20 @@
>;
};
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
tsc2004_pins: pinmux_tsc2004_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
@@ -249,18 +263,6 @@
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- >;
- };
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
- OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
- >;
- };
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 642e809e757a..449cc7616da6 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -108,7 +108,6 @@
&dss {
status = "ok";
vdds_dsi-supply = <&vpll2>;
- vdda_video-supply = <&video_reg>;
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins1>;
port {
@@ -124,44 +123,20 @@
display0 = &lcd0;
};
- video_reg: video_reg {
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pwr_pins>;
- compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
- };
-
lcd0: display {
- compatible = "panel-dpi";
+ /* This isn't the exact LCD, but the timings meet spec */
+ /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
label = "15";
- status = "okay";
- /* default-on; */
pinctrl-names = "default";
-
+ pinctrl-0 = <&panel_pwr_pins>;
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <4>;
- vsync-len = <11>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
};
bl: backlight {
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c7bf9c493646..64eb896907bf 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -363,6 +363,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_TILCDC=m
+CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 6c6f8fce854e..d942a3357090 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -491,11 +491,11 @@ static int ti_sysc_clkdm_init(struct device *dev,
struct clk *fck, struct clk *ick,
struct ti_sysc_cookie *cookie)
{
- if (fck)
+ if (!IS_ERR(fck))
cookie->clkdm = ti_sysc_find_one_clockdomain(fck);
if (cookie->clkdm)
return 0;
- if (ick)
+ if (!IS_ERR(ick))
cookie->clkdm = ti_sysc_find_one_clockdomain(ick);
if (cookie->clkdm)
return 0;
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 2db474ab4c6b..364ee498feb3 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -280,9 +280,6 @@ static int sysc_get_one_clock(struct sysc *ddata, const char *name)
ddata->clocks[index] = devm_clk_get(ddata->dev, name);
if (IS_ERR(ddata->clocks[index])) {
- if (PTR_ERR(ddata->clocks[index]) == -ENOENT)
- return 0;
-
dev_err(ddata->dev, "clock get error for %s: %li\n",
name, PTR_ERR(ddata->clocks[index]));
@@ -357,7 +354,7 @@ static int sysc_get_clocks(struct sysc *ddata)
continue;
error = sysc_get_one_clock(ddata, name);
- if (error && error != -ENOENT)
+ if (error)
return error;
}
@@ -1630,17 +1627,19 @@ static int sysc_init_module(struct sysc *ddata)
if (error)
return error;
- if (manage_clocks) {
- sysc_clkdm_deny_idle(ddata);
+ sysc_clkdm_deny_idle(ddata);
- error = sysc_enable_opt_clocks(ddata);
- if (error)
- return error;
+ /*
+ * Always enable clocks. The bootloader may or may not have enabled
+ * the related clocks.
+ */
+ error = sysc_enable_opt_clocks(ddata);
+ if (error)
+ return error;
- error = sysc_enable_main_clocks(ddata);
- if (error)
- goto err_opt_clocks;
- }
+ error = sysc_enable_main_clocks(ddata);
+ if (error)
+ goto err_opt_clocks;
if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) {
error = sysc_rstctrl_reset_deassert(ddata, true);
@@ -1658,7 +1657,7 @@ static int sysc_init_module(struct sysc *ddata)
goto err_main_clocks;
}
- if (!ddata->legacy_mode && manage_clocks) {
+ if (!ddata->legacy_mode) {
error = sysc_enable_module(ddata->dev);
if (error)
goto err_main_clocks;
@@ -1675,6 +1674,7 @@ err_main_clocks:
if (manage_clocks)
sysc_disable_main_clocks(ddata);
err_opt_clocks:
+ /* No re-enable of clockdomain autoidle to prevent module autoidle */
if (manage_clocks) {
sysc_disable_opt_clocks(ddata);
sysc_clkdm_allow_idle(ddata);
@@ -2355,6 +2355,27 @@ static void ti_sysc_idle(struct work_struct *work)
ddata = container_of(work, struct sysc, idle_work.work);
+ /*
+ * One time decrement of clock usage counts if left on from init.
+ * Note that we disable opt clocks unconditionally in this case
+ * as they are enabled unconditionally during init without
+ * considering sysc_opt_clks_needed() at that point.
+ */
+ if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE |
+ SYSC_QUIRK_NO_IDLE_ON_INIT)) {
+ sysc_disable_main_clocks(ddata);
+ sysc_disable_opt_clocks(ddata);
+ sysc_clkdm_allow_idle(ddata);
+ }
+
+ /* Keep permanent PM runtime usage count for SYSC_QUIRK_NO_IDLE */
+ if (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE)
+ return;
+
+ /*
+ * Decrement PM runtime usage count for SYSC_QUIRK_NO_IDLE_ON_INIT
+ * and SYSC_QUIRK_NO_RESET_ON_INIT
+ */
if (pm_runtime_active(ddata->dev))
pm_runtime_put_sync(ddata->dev);
}
@@ -2439,7 +2460,8 @@ static int sysc_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&ddata->idle_work, ti_sysc_idle);
/* At least earlycon won't survive without deferred idle */
- if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE_ON_INIT |
+ if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE |
+ SYSC_QUIRK_NO_IDLE_ON_INIT |
SYSC_QUIRK_NO_RESET_ON_INIT)) {
schedule_delayed_work(&ddata->idle_work, 3000);
} else {