Merge tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are a small number of patches to resolve some reported IIO and a
  staging driver problem. Nothing major here, full details are in the
  shortlog below.

  All have been in linux-next with no reported issues"

* tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: bcm2835-audio: Fix memory corruption
  iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
  iio: adc: dln2-adc: fix build error
  iio: dummy: events: Add missing break
  staging: iio: ade7759: fix signed extension bug on shift of a u8
  iio: pressure: zpa2326: Remove always-true check which confuses gcc
  iio: proximity: as3935: noise detection + threshold changes

9 files changed, 96 insertions, 39 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 33e96f740639..147d4e8a1403 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index 38d74314b7ab..b6c1afa6f02d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 57625653fcb6..1d13bf03c758 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -243,6 +243,8 @@ config DA9150_GPADC
 config DLN2_ADC
 	tristate "Diolan DLN-2 ADC driver support"
 	depends on MFD_DLN2
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Diolan DLN-2 ADC.
 
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index bc5b38e3a147..a70ef7fec95f 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -225,6 +225,7 @@ struct at91_adc_trigger {
 	char				*name;
 	unsigned int			trgmod_value;
 	unsigned int			edge_type;
+	bool				hw_trig;
 };
 
 struct at91_adc_state {
@@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = {
 		.name = "external_rising",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
 		.edge_type = IRQ_TYPE_EDGE_RISING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_falling",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
 		.edge_type = IRQ_TYPE_EDGE_FALLING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_any",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
 		.edge_type = IRQ_TYPE_EDGE_BOTH,
+		.hw_trig = true,
+	},
+	{
+		.name = "software",
+		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER,
+		.edge_type = IRQ_TYPE_NONE,
+		.hw_trig = false,
 	},
 };
 
@@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	struct at91_adc_state *st;
 	struct resource	*res;
 	int ret, i;
-	u32 edge_type;
+	u32 edge_type = IRQ_TYPE_NONE;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
 	if (!indio_dev)
@@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "atmel,trigger-edge-type", &edge_type);
 	if (ret) {
-		dev_err(&pdev->dev,
-			"invalid or missing value for atmel,trigger-edge-type\n");
-		return ret;
+		dev_dbg(&pdev->dev,
+			"atmel,trigger-edge-type not specified, only software trigger available\n");
 	}
 
 	st->selected_trig = NULL;
 
-	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
+	/* find the right trigger, or no trigger at all */
+	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++)
 		if (at91_adc_trigger_list[i].edge_type == edge_type) {
 			st->selected_trig = &at91_adc_trigger_list[i];
 			break;
@@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	ret = at91_adc_buffer_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
-		goto per_clk_disable_unprepare;
-	}
+	if (st->selected_trig->hw_trig) {
+		ret = at91_adc_buffer_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
+			goto per_clk_disable_unprepare;
+		}
 
-	ret = at91_adc_trigger_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't setup the triggers.\n");
-		goto per_clk_disable_unprepare;
+		ret = at91_adc_trigger_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't setup the triggers.\n");
+			goto per_clk_disable_unprepare;
+		}
 	}
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
 		goto per_clk_disable_unprepare;
 
-	dev_info(&pdev->dev, "setting up trigger as %s\n",
-		 st->selected_trig->name);
+	if (st->selected_trig->hw_trig)
+		dev_info(&pdev->dev, "setting up trigger as %s\n",
+			 st->selected_trig->name);
 
 	dev_info(&pdev->dev, "version: %x\n",
 		 readl_relaxed(st->base + AT91_SAMA5D2_VERSION));
diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c
index ed63ffd849f8..7ec2a0bb0807 100644
--- a/drivers/iio/dummy/iio_simple_dummy_events.c
+++ b/drivers/iio/dummy/iio_simple_dummy_events.c
@@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
 				st->event_en = state;
 			else
 				return -EINVAL;
+			break;
 		default:
 			return -EINVAL;
 		}
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index ebfb1de7377f..91431454eb85 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -865,7 +865,6 @@ complete:
 static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 					   struct zpa2326_private *private)
 {
-	int          ret;
 	unsigned int val;
 	long     timeout;
 
@@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 		/* Timed out. */
 		zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
 			     timeout);
-		ret = -ETIME;
-	} else if (timeout < 0) {
-		zpa2326_warn(indio_dev,
-			     "wait for one shot interrupt cancelled");
-		ret = -ERESTARTSYS;
+		return -ETIME;
 	}
 
-	return ret;
+	zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled");
+	return -ERESTARTSYS;
 }
 
 static int zpa2326_init_managed_irq(struct device          *parent,
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 0eeff29b61be..4a48b7ba3a1c 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -39,8 +39,12 @@
 #define AS3935_AFE_GAIN_MAX	0x1F
 #define AS3935_AFE_PWR_BIT	BIT(0)
 
+#define AS3935_NFLWDTH		0x01
+#define AS3935_NFLWDTH_MASK	0x7f
+
 #define AS3935_INT		0x03
 #define AS3935_INT_MASK		0x0f
+#define AS3935_DISTURB_INT	BIT(2)
 #define AS3935_EVENT_INT	BIT(3)
 #define AS3935_NOISE_INT	BIT(0)
 
@@ -48,6 +52,7 @@
 #define AS3935_DATA_MASK	0x3F
 
 #define AS3935_TUNE_CAP		0x08
+#define AS3935_DEFAULTS		0x3C
 #define AS3935_CALIBRATE	0x3D
 
 #define AS3935_READ_DATA	BIT(14)
@@ -62,7 +67,9 @@ struct as3935_state {
 	struct mutex lock;
 	struct delayed_work work;
 
+	unsigned long noise_tripped;
 	u32 tune_cap;
+	u32 nflwdth_reg;
 	u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
 	u8 buf[2] ____cacheline_aligned;
 };
@@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
 	return len;
 }
 
+static ssize_t as3935_noise_level_tripped_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
 static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
 	as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
 
+static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
+	as3935_noise_level_tripped_show, NULL, 0);
 
 static struct attribute *as3935_attributes[] = {
 	&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+	&iio_dev_attr_noise_level_tripped.dev_attr.attr,
 	NULL,
 };
 
@@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work)
 	case AS3935_EVENT_INT:
 		iio_trigger_poll_chained(st->trig);
 		break;
+	case AS3935_DISTURB_INT:
 	case AS3935_NOISE_INT:
+		mutex_lock(&st->lock);
+		st->noise_tripped = jiffies;
+		mutex_unlock(&st->lock);
 		dev_warn(&st->spi->dev, "noise level is too high\n");
 		break;
 	}
@@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private)
 
 static void calibrate_as3935(struct as3935_state *st)
 {
-	/* mask disturber interrupt bit */
-	as3935_write(st, AS3935_INT, BIT(5));
-
+	as3935_write(st, AS3935_DEFAULTS, 0x96);
 	as3935_write(st, AS3935_CALIBRATE, 0x96);
 	as3935_write(st, AS3935_TUNE_CAP,
 		BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
 
 	mdelay(2);
 	as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
+	as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	ret = of_property_read_u32(np,
+			"ams,nflwdth", &st->nflwdth_reg);
+	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
+		dev_err(&spi->dev,
+			"invalid nflwdth setting of %d\n",
+			st->nflwdth_reg);
+		return -EINVAL;
+	}
+
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->channels = as3935_channels;
@@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	st->trig = trig;
+	st->noise_tripped = jiffies - HZ;
 	trig->dev.parent = indio_dev->dev.parent;
 	iio_trigger_set_drvdata(trig, indio_dev);
 	trig->ops = &iio_interrupt_trigger_ops;
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 1691760339da..02573c517d9d 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -172,7 +172,7 @@ static int ade7759_spi_read_reg_40(struct device *dev,
 				reg_address);
 		goto error_ret;
 	}
-	*val = ((u64)st->rx[1] << 32) | (st->rx[2] << 24) |
+	*val = ((u64)st->rx[1] << 32) | ((u64)st->rx[2] << 24) |
 		(st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5];
 
 error_ret:
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
index 5f3d8f2339e3..4be864dbd41c 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
@@ -390,8 +390,7 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
 			__func__, instance);
 		instance->alsa_stream = alsa_stream;
 		alsa_stream->instance = instance;
-		ret = 0; // xxx todo -1;
-		goto err_free_mem;
+		return 0;
 	}
 
 	/* Initialize and create a VCHI connection */
@@ -401,16 +400,15 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
 			LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
 				__func__, ret);
 
-			ret = -EIO;
-			goto err_free_mem;
+			return -EIO;
 		}
 		ret = vchi_connect(NULL, 0, vchi_instance);
 		if (ret) {
 			LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
 				__func__, ret);
 
-			ret = -EIO;
-			goto err_free_mem;
+			kfree(vchi_instance);
+			return -EIO;
 		}
 		initted = 1;
 	}
@@ -421,19 +419,16 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
 	if (IS_ERR(instance)) {
 		LOG_ERR("%s: failed to initialize audio service\n", __func__);
 
-		ret = PTR_ERR(instance);
-		goto err_free_mem;
+		/* vchi_instance is retained for use the next time. */
+		return PTR_ERR(instance);
 	}
 
 	instance->alsa_stream = alsa_stream;
 	alsa_stream->instance = instance;
 
 	LOG_DBG(" success !\n");
-	ret = 0;
-err_free_mem:
-	kfree(vchi_instance);
 
-	return ret;
+	return 0;
 }
 
 int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream)