Merge tag 'platform-drivers-x86-v4.4-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver update from Darren Hart:
 "Various toshiba hotkey and keyboard related fixes and a new WMI
  driver.  Several intel_scu_ipc cleanups and a locking fix.  A
  spattering of small single fixes across various platforms.

  I was asked to pick up an OLPC cleanup as the driver appeared
  unmaintained and it seemed similar to what is maintained in
  platform/drivers/x86.  I have included the patch and an update to the
  MAINTAINERS file.

  toshiba_acpi:
   - Initialize hotkey_event_type variable
   - Remove unneeded u32 variables from *setup_keyboard
   - Add 0x prefix to available_kbd_modes_show function
   - Change default Hotkey enabling value
   - Unify hotkey enabling functions

  toshiba-wmi:
   - Toshiba WMI Hotkey Driver

  intel_scu_ipc:
   - Protect dev member assignment on ->remove()
   - Switch to use module_pci_driver() macro
   - Convert to use struct device *
   - Propagate pointer to struct intel_scu_ipc_dev
   - Fix error path by turning to devm_* / pcim_*

  acer-wmi:
   - remove threeg and interface sysfs interfaces

  OLPC:
   - Use %*ph specifier instead of passing direct values

  MAINTAINERS:
   - Add drivers/platform/olpc to drivers/platform/x86

  sony-laptop:
   - Fix handling sony_nc_hotkeys_decode result

  intel_mid_powerbtn:
   - Remove misuse of IRQF_NO_SUSPEND flag

  compal-laptop:
   - Add charge control limit

  asus-wmi:
   - restore kbd led level after resume"

* tag 'platform-drivers-x86-v4.4-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  toshiba_acpi: Initialize hotkey_event_type variable
  intel_scu_ipc: Protect dev member assignment on ->remove()
  intel_scu_ipc: Switch to use module_pci_driver() macro
  intel_scu_ipc: Convert to use struct device *
  intel_scu_ipc: Propagate pointer to struct intel_scu_ipc_dev
  intel_scu_ipc: Fix error path by turning to devm_* / pcim_*
  acer-wmi: remove threeg and interface sysfs interfaces
  OLPC: Use %*ph specifier instead of passing direct values
  MAINTAINERS: Add drivers/platform/olpc to drivers/platform/x86
  platform/x86: Toshiba WMI Hotkey Driver
  sony-laptop: Fix handling sony_nc_hotkeys_decode result
  intel_mid_powerbtn: Remove misuse of IRQF_NO_SUSPEND flag
  compal-laptop: Add charge control limit
  asus-wmi: restore kbd led level after resume
  toshiba_acpi: Remove unneeded u32 variables from *setup_keyboard
  toshiba_acpi: Add 0x prefix to available_kbd_modes_show function
  toshiba_acpi: Change default Hotkey enabling value
  toshiba_acpi: Unify hotkey enabling functions

12 files changed, 358 insertions, 252 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 7301ae17ec63..15c38961d6ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10699,6 +10699,12 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/toshiba_haps.c
 
+TOSHIBA WMI HOTKEYS DRIVER
+M:	Azael Avalos <coproscefalo@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/toshiba-wmi.c
+
 TOSHIBA SMM DRIVER
 M:	Jonathan Buzzard <jonathan@buzzard.org.uk>
 W:	http://www.buzzard.org.uk/toshiba/
@@ -11621,6 +11627,7 @@ L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
 S:	Maintained
 F:	drivers/platform/x86/
+F:	drivers/platform/olpc/
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
index f9119525f557..f99b183d5296 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -192,18 +192,15 @@ static ssize_t ec_dbgfs_cmd_write(struct file *file, const char __user *buf,
 	for (i = 0; i <= ec_cmd_bytes; i++)
 		ec_cmd[i] = ec_cmd_int[i];
 
-	pr_debug("olpc-ec: debugfs cmd 0x%02x with %d args %02x %02x %02x %02x %02x, want %d returns\n",
-			ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2],
-			ec_cmd[3], ec_cmd[4], ec_cmd[5], ec_dbgfs_resp_bytes);
+	pr_debug("olpc-ec: debugfs cmd 0x%02x with %d args %5ph, want %d returns\n",
+			ec_cmd[0], ec_cmd_bytes, ec_cmd + 1,
+			ec_dbgfs_resp_bytes);
 
 	olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1],
 			ec_cmd_bytes, ec_dbgfs_resp, ec_dbgfs_resp_bytes);
 
-	pr_debug("olpc-ec: response %02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n",
-			ec_dbgfs_resp[0], ec_dbgfs_resp[1], ec_dbgfs_resp[2],
-			ec_dbgfs_resp[3], ec_dbgfs_resp[4], ec_dbgfs_resp[5],
-			ec_dbgfs_resp[6], ec_dbgfs_resp[7],
-			ec_dbgfs_resp_bytes);
+	pr_debug("olpc-ec: response %8ph (%d bytes expected)\n",
+			ec_dbgfs_resp, ec_dbgfs_resp_bytes);
 
 out:
 	mutex_unlock(&ec_dbgfs_lock);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c69bb703f483..7b492d9b3ec4 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -309,8 +309,8 @@ config COMPAL_LAPTOP
 	  This is a driver for laptops built by Compal, and some models by
 	  other brands (e.g. Dell, Toshiba).
 
-	  It adds support for rfkill, Bluetooth, WLAN and LCD brightness
-	  control.
+	  It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
+	  and battery charging level control.
 
 	  For a (possibly incomplete) list of supported laptops, please refer
 	  to: Documentation/platform/x86-laptop-drivers.txt
@@ -700,6 +700,24 @@ config TOSHIBA_HAPS
 	  If you have a recent Toshiba laptop with a built-in accelerometer
 	  device, say Y.
 
+config TOSHIBA_WMI
+	tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
+	default n
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	---help---
+	  This driver adds hotkey monitoring support to some Toshiba models
+	  that manage the hotkeys via WMI events.
+
+	  WARNING: This driver is incomplete as it lacks a proper keymap and the
+	  *notify function only prints the ACPI event type value. Be warned that
+	  you will need to provide some information if you have a Toshiba model
+	  with WMI event hotkeys and want to help with the develpment of this
+	  driver.
+
+	  If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
+
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
 	depends on X86 && ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index ada512819028..3ca78a3eb6f8 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
 obj-$(CONFIG_TOSHIBA_HAPS)	+= toshiba_haps.o
+obj-$(CONFIG_TOSHIBA_WMI)	+= toshiba-wmi.o
 obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index d773b9dc48a0..1062fa42ff26 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1662,58 +1662,6 @@ static void acer_rfkill_exit(void)
 	return;
 }
 
-/*
- * sysfs interface
- */
-static ssize_t show_bool_threeg(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	u32 result; \
-	acpi_status status;
-
-	pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	status = get_u32(&result, ACER_CAP_THREEG);
-	if (ACPI_SUCCESS(status))
-		return sprintf(buf, "%u\n", result);
-	return sprintf(buf, "Read error\n");
-}
-
-static ssize_t set_bool_threeg(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	u32 tmp = simple_strtoul(buf, NULL, 10);
-	acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
-	pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	if (ACPI_FAILURE(status))
-		return -EINVAL;
-	return count;
-}
-static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
-	set_bool_threeg);
-
-static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
-	char *buf)
-{
-	pr_info("This interface sysfs will be removed in 2014 - used by: %s\n",
-		current->comm);
-	switch (interface->type) {
-	case ACER_AMW0:
-		return sprintf(buf, "AMW0\n");
-	case ACER_AMW0_V2:
-		return sprintf(buf, "AMW0 v2\n");
-	case ACER_WMID:
-		return sprintf(buf, "WMID\n");
-	case ACER_WMID_v2:
-		return sprintf(buf, "WMID v2\n");
-	default:
-		return sprintf(buf, "Error!\n");
-	}
-}
-
-static DEVICE_ATTR(interface, S_IRUGO, show_interface, NULL);
-
 static void acer_wmi_notify(u32 value, void *context)
 {
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -2127,39 +2075,6 @@ static struct platform_driver acer_platform_driver = {
 
 static struct platform_device *acer_platform_device;
 
-static int remove_sysfs(struct platform_device *device)
-{
-	if (has_cap(ACER_CAP_THREEG))
-		device_remove_file(&device->dev, &dev_attr_threeg);
-
-	device_remove_file(&device->dev, &dev_attr_interface);
-
-	return 0;
-}
-
-static int __init create_sysfs(void)
-{
-	int retval = -ENOMEM;
-
-	if (has_cap(ACER_CAP_THREEG)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_threeg);
-		if (retval)
-			goto error_sysfs;
-	}
-
-	retval = device_create_file(&acer_platform_device->dev,
-		&dev_attr_interface);
-	if (retval)
-		goto error_sysfs;
-
-	return 0;
-
-error_sysfs:
-		remove_sysfs(acer_platform_device);
-	return retval;
-}
-
 static void remove_debugfs(void)
 {
 	debugfs_remove(interface->debug.devices);
@@ -2290,10 +2205,6 @@ static int __init acer_wmi_init(void)
 	if (err)
 		goto error_device_add;
 
-	err = create_sysfs();
-	if (err)
-		goto error_create_sys;
-
 	if (wmi_has_guid(WMID_GUID2)) {
 		interface->debug.wmid_devices = get_wmid_devices();
 		err = create_debugfs();
@@ -2307,8 +2218,6 @@ static int __init acer_wmi_init(void)
 	return 0;
 
 error_create_debugfs:
-	remove_sysfs(acer_platform_device);
-error_create_sys:
 	platform_device_del(acer_platform_device);
 error_device_add:
 	platform_device_put(acer_platform_device);
@@ -2331,7 +2240,6 @@ static void __exit acer_wmi_exit(void)
 	if (has_cap(ACER_CAP_ACCEL))
 		acer_wmi_accel_destroy();
 
-	remove_sysfs(acer_platform_device);
 	remove_debugfs();
 	platform_device_unregister(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index efbc3f0c592b..1f7d80ff8cb4 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -582,7 +582,7 @@ static void asus_wmi_led_exit(struct asus_wmi *asus)
 
 static int asus_wmi_led_init(struct asus_wmi *asus)
 {
-	int rv = 0;
+	int rv = 0, led_val;
 
 	asus->led_workqueue = create_singlethread_workqueue("led_workqueue");
 	if (!asus->led_workqueue)
@@ -602,9 +602,11 @@ static int asus_wmi_led_init(struct asus_wmi *asus)
 			goto error;
 	}
 
-	if (kbd_led_read(asus, NULL, NULL) >= 0) {
+	led_val = kbd_led_read(asus, NULL, NULL);
+	if (led_val >= 0) {
 		INIT_WORK(&asus->kbd_led_work, kbd_led_update);
 
+		asus->kbd_led_wk = led_val;
 		asus->kbd_led.name = "asus::kbd_backlight";
 		asus->kbd_led.brightness_set = kbd_led_set;
 		asus->kbd_led.brightness_get = kbd_led_get;
@@ -2160,6 +2162,16 @@ static int asus_hotk_thaw(struct device *device)
 	return 0;
 }
 
+static int asus_hotk_resume(struct device *device)
+{
+	struct asus_wmi *asus = dev_get_drvdata(device);
+
+	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
+		queue_work(asus->led_workqueue, &asus->kbd_led_work);
+
+	return 0;
+}
+
 static int asus_hotk_restore(struct device *device)
 {
 	struct asus_wmi *asus = dev_get_drvdata(device);
@@ -2190,6 +2202,8 @@ static int asus_hotk_restore(struct device *device)
 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_UWB);
 		rfkill_set_sw_state(asus->uwb.rfkill, bl);
 	}
+	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
+		queue_work(asus->led_workqueue, &asus->kbd_led_work);
 
 	return 0;
 }
@@ -2197,6 +2211,7 @@ static int asus_hotk_restore(struct device *device)
 static const struct dev_pm_ops asus_pm_ops = {
 	.thaw = asus_hotk_thaw,
 	.restore = asus_hotk_restore,
+	.resume = asus_hotk_resume,
 };
 
 static int asus_wmi_probe(struct platform_device *pdev)
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index f2706d27adff..e1c2b6d4b24a 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -151,6 +151,8 @@
 #define BAT_STATUS2			0xF1
 #define BAT_STOP_CHARGE1		0xF2
 #define BAT_STOP_CHARGE2		0xF3
+#define BAT_CHARGE_LIMIT		0x03
+#define BAT_CHARGE_LIMIT_MAX		100
 
 #define BAT_S0_DISCHARGE		(1 << 0)
 #define BAT_S0_DISCHRG_CRITICAL		(1 << 2)
@@ -601,6 +603,12 @@ static int bat_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+		val->intval = BAT_CHARGE_LIMIT_MAX;
+		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		val->intval = ec_read_u8(BAT_CAPACITY);
 		break;
@@ -634,6 +642,36 @@ static int bat_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int bat_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	int level;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		level = val->intval;
+		if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
+			return -EINVAL;
+		if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
+			return -EIO;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int bat_writeable_property(struct power_supply *psy,
+				enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return 1;
+	default:
+		return 0;
+	}
+}
 
 
 
@@ -726,6 +764,8 @@ static enum power_supply_property compal_bat_properties[] = {
 	POWER_SUPPLY_PROP_POWER_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
@@ -880,11 +920,12 @@ static const struct power_supply_desc psy_bat_desc = {
 	.properties	= compal_bat_properties,
 	.num_properties	= ARRAY_SIZE(compal_bat_properties),
 	.get_property	= bat_get_property,
+	.set_property	= bat_set_property,
+	.property_is_writeable = bat_writeable_property,
 };
 
 static void initialize_power_supply_data(struct compal_data *data)
 {
-
 	ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 					data->bat_manufacturer_name,
 					BAT_MANUFACTURER_NAME_LEN);
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 22606d6b2af3..1fc0de870ff8 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/mfd/intel_msic.h>
+#include <linux/pm_wakeirq.h>
 
 #define DRIVER_NAME "msic_power_btn"
 
@@ -76,14 +77,17 @@ static int mfld_pb_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	error = request_threaded_irq(irq, NULL, mfld_pb_isr, IRQF_NO_SUSPEND,
-			DRIVER_NAME, input);
+	error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0,
+				     DRIVER_NAME, input);
 	if (error) {
 		dev_err(&pdev->dev, "Unable to request irq %d for mfld power"
 				"button\n", irq);
 		goto err_free_input;
 	}
 
+	device_init_wakeup(&pdev->dev, true);
+	dev_pm_set_wake_irq(&pdev->dev, irq);
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&pdev->dev, "Unable to register input dev, error "
@@ -124,6 +128,8 @@ static int mfld_pb_remove(struct platform_device *pdev)
 	struct input_dev *input = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
 
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 	free_irq(irq, input);
 	input_unregister_device(input);
 
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 187d1086d15c..f94b730540e2 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -92,11 +92,8 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
 	.irq_mode = 0,
 };
 
-static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
-static void ipc_remove(struct pci_dev *pdev);
-
 struct intel_scu_ipc_dev {
-	struct pci_dev *pdev;
+	struct device *dev;
 	void __iomem *ipc_base;
 	void __iomem *i2c_base;
 	struct completion cmd_complete;
@@ -118,28 +115,30 @@ static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
 static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
 
 /*
+ * Send ipc command
  * Command Register (Write Only):
  * A write to this register results in an interrupt to the SCU core processor
  * Format:
  * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
  */
-static inline void ipc_command(u32 cmd) /* Send ipc command */
+static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd)
 {
-	if (ipcdev.irq_mode) {
-		reinit_completion(&ipcdev.cmd_complete);
-		writel(cmd | IPC_IOC, ipcdev.ipc_base);
+	if (scu->irq_mode) {
+		reinit_completion(&scu->cmd_complete);
+		writel(cmd | IPC_IOC, scu->ipc_base);
 	}
-	writel(cmd, ipcdev.ipc_base);
+	writel(cmd, scu->ipc_base);
 }
 
 /*
+ * Write ipc data
  * IPC Write Buffer (Write Only):
  * 16-byte buffer for sending data associated with IPC command to
  * SCU. Size of the data is specified in the IPC_COMMAND_REG register
  */
-static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
+static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset)
 {
-	writel(data, ipcdev.ipc_base + 0x80 + offset);
+	writel(data, scu->ipc_base + 0x80 + offset);
 }
 
 /*
@@ -149,35 +148,37 @@ static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
  * Format:
  * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
  */
-static inline u8 ipc_read_status(void)
+static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
 {
-	return __raw_readl(ipcdev.ipc_base + 0x04);
+	return __raw_readl(scu->ipc_base + 0x04);
 }
 
-static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
+/* Read ipc byte data */
+static inline u8 ipc_data_readb(struct intel_scu_ipc_dev *scu, u32 offset)
 {
-	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+	return readb(scu->ipc_base + IPC_READ_BUFFER + offset);
 }
 
-static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+/* Read ipc u32 data */
+static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
 {
-	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+	return readl(scu->ipc_base + IPC_READ_BUFFER + offset);
 }
 
 /* Wait till scu status is busy */
-static inline int busy_loop(void)
+static inline int busy_loop(struct intel_scu_ipc_dev *scu)
 {
-	u32 status = ipc_read_status();
+	u32 status = ipc_read_status(scu);
 	u32 loop_count = 100000;
 
 	/* break if scu doesn't reset busy bit after huge retry */
 	while ((status & BIT(0)) && --loop_count) {
 		udelay(1); /* scu processing time is in few u secods */
-		status = ipc_read_status();
+		status = ipc_read_status(scu);
 	}
 
 	if (status & BIT(0)) {
-		dev_err(&ipcdev.pdev->dev, "IPC timed out");
+		dev_err(scu->dev, "IPC timed out");
 		return -ETIMEDOUT;
 	}
 
@@ -188,31 +189,31 @@ static inline int busy_loop(void)
 }
 
 /* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
-static inline int ipc_wait_for_interrupt(void)
+static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 {
 	int status;
 
-	if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) {
-		struct device *dev = &ipcdev.pdev->dev;
-		dev_err(dev, "IPC timed out\n");
+	if (!wait_for_completion_timeout(&scu->cmd_complete, 3 * HZ)) {
+		dev_err(scu->dev, "IPC timed out\n");
 		return -ETIMEDOUT;
 	}
 
-	status = ipc_read_status();
+	status = ipc_read_status(scu);
 	if (status & BIT(1))
 		return -EIO;
 
 	return 0;
 }
 
-static int intel_scu_ipc_check_status(void)
+static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
 {
-	return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop();
+	return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
 }
 
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
 static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int nc;
 	u32 offset = 0;
 	int err;
@@ -223,7 +224,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 
 	mutex_lock(&ipclock);
 
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
@@ -235,27 +236,27 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 
 	if (id == IPC_CMD_PCNTRL_R) {
 		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset);
-		ipc_command((count * 2) << 16 | id << 12 | 0 << 8 | op);
+			ipc_data_writel(scu, wbuf[nc], offset);
+		ipc_command(scu, (count * 2) << 16 | id << 12 | 0 << 8 | op);
 	} else if (id == IPC_CMD_PCNTRL_W) {
 		for (nc = 0; nc < count; nc++, offset += 1)
 			cbuf[offset] = data[nc];
 		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset);
-		ipc_command((count * 3) << 16 | id << 12 | 0 << 8 | op);
+			ipc_data_writel(scu, wbuf[nc], offset);
+		ipc_command(scu, (count * 3) << 16 | id << 12 | 0 << 8 | op);
 	} else if (id == IPC_CMD_PCNTRL_M) {
 		cbuf[offset] = data[0];
 		cbuf[offset + 1] = data[1];
-		ipc_data_writel(wbuf[0], 0); /* Write wbuff */
-		ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
+		ipc_data_writel(scu, wbuf[0], 0); /* Write wbuff */
+		ipc_command(scu, 4 << 16 | id << 12 | 0 << 8 | op);
 	}
 
-	err = intel_scu_ipc_check_status();
+	err = intel_scu_ipc_check_status(scu);
 	if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
 		/* Workaround: values are read as 0 without memcpy_fromio */
-		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+		memcpy_fromio(cbuf, scu->ipc_base + 0x90, 16);
 		for (nc = 0; nc < count; nc++)
-			data[nc] = ipc_data_readb(nc);
+			data[nc] = ipc_data_readb(scu, nc);
 	}
 	mutex_unlock(&ipclock);
 	return err;
@@ -436,15 +437,16 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
  */
 int intel_scu_ipc_simple_command(int cmd, int sub)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int err;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
-	ipc_command(sub << 12 | cmd);
-	err = intel_scu_ipc_check_status();
+	ipc_command(scu, sub << 12 | cmd);
+	err = intel_scu_ipc_check_status(scu);
 	mutex_unlock(&ipclock);
 	return err;
 }
@@ -465,23 +467,24 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
 int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
 			  u32 *out, int outlen)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	int i, err;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 
 	for (i = 0; i < inlen; i++)
-		ipc_data_writel(*in++, 4 * i);
+		ipc_data_writel(scu, *in++, 4 * i);
 
-	ipc_command((inlen << 16) | (sub << 12) | cmd);
-	err = intel_scu_ipc_check_status();
+	ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
+	err = intel_scu_ipc_check_status(scu);
 
 	if (!err) {
 		for (i = 0; i < outlen; i++)
-			*out++ = ipc_data_readl(4 * i);
+			*out++ = ipc_data_readl(scu, 4 * i);
 	}
 
 	mutex_unlock(&ipclock);
@@ -507,25 +510,26 @@ EXPORT_SYMBOL(intel_scu_ipc_command);
  */
 int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
 {
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	u32 cmd = 0;
 
 	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
+	if (scu->dev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 	cmd = (addr >> 24) & 0xFF;
 	if (cmd == IPC_I2C_READ) {
-		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+		writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
 		/* Write not getting updated without delay */
 		mdelay(1);
-		*data = readl(ipcdev.i2c_base + I2C_DATA_ADDR);
+		*data = readl(scu->i2c_base + I2C_DATA_ADDR);
 	} else if (cmd == IPC_I2C_WRITE) {
-		writel(*data, ipcdev.i2c_base + I2C_DATA_ADDR);
+		writel(*data, scu->i2c_base + I2C_DATA_ADDR);
 		mdelay(1);
-		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+		writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
 	} else {
-		dev_err(&ipcdev.pdev->dev,
+		dev_err(scu->dev,
 			"intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
 
 		mutex_unlock(&ipclock);
@@ -545,63 +549,65 @@ EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
  */
 static irqreturn_t ioc(int irq, void *dev_id)
 {
-	if (ipcdev.irq_mode)
-		complete(&ipcdev.cmd_complete);
+	struct intel_scu_ipc_dev *scu = dev_id;
+
+	if (scu->irq_mode)
+		complete(&scu->cmd_complete);
 
 	return IRQ_HANDLED;
 }
 
 /**
  *	ipc_probe	-	probe an Intel SCU IPC
- *	@dev: the PCI device matching
+ *	@pdev: the PCI device matching
  *	@id: entry in the match table
  *
  *	Enable and install an intel SCU IPC. This appears in the PCI space
  *	but uses some hard coded addresses as well.
  */
-static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	int platform;		/* Platform type */
 	int err;
+	struct intel_scu_ipc_dev *scu = &ipcdev;
 	struct intel_scu_ipc_pdata_t *pdata;
-	resource_size_t base;
 
-	if (ipcdev.pdev)		/* We support only one SCU */
+	platform = intel_mid_identify_cpu();
+	if (platform == 0)
+		return -ENODEV;
+
+	if (scu->dev)		/* We support only one SCU */
 		return -EBUSY;
 
 	pdata = (struct intel_scu_ipc_pdata_t *)id->driver_data;
 
-	ipcdev.pdev = pci_dev_get(dev);
-	ipcdev.irq_mode = pdata->irq_mode;
+	scu->dev = &pdev->dev;
+	scu->irq_mode = pdata->irq_mode;
 
-	err = pci_enable_device(dev);
+	err = pcim_enable_device(pdev);
 	if (err)
 		return err;
 
-	err = pci_request_regions(dev, "intel_scu_ipc");
+	err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (err)
 		return err;
 
-	base = pci_resource_start(dev, 0);
-	if (!base)
-		return -ENOMEM;
+	init_completion(&scu->cmd_complete);
 
-	init_completion(&ipcdev.cmd_complete);
+	err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
+			       scu);
+	if (err)
+		return err;
 
-	if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
-		return -EBUSY;
+	scu->ipc_base = pcim_iomap_table(pdev)[0];
 
-	ipcdev.ipc_base = ioremap_nocache(base, pci_resource_len(dev, 0));
-	if (!ipcdev.ipc_base)
+	scu->i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
+	if (!scu->i2c_base)
 		return -ENOMEM;
 
-	ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
-	if (!ipcdev.i2c_base) {
-		iounmap(ipcdev.ipc_base);
-		return -ENOMEM;
-	}
-
 	intel_scu_devices_create();
 
+	pci_set_drvdata(pdev, scu);
 	return 0;
 }
 
@@ -617,12 +623,13 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
  */
 static void ipc_remove(struct pci_dev *pdev)
 {
-	free_irq(pdev->irq, &ipcdev);
-	pci_release_regions(pdev);
-	pci_dev_put(ipcdev.pdev);
-	iounmap(ipcdev.ipc_base);
-	iounmap(ipcdev.i2c_base);
-	ipcdev.pdev = NULL;
+	struct intel_scu_ipc_dev *scu = pci_get_drvdata(pdev);
+
+	mutex_lock(&ipclock);
+	scu->dev = NULL;
+	mutex_unlock(&ipclock);
+
+	iounmap(scu->i2c_base);
 	intel_scu_devices_destroy();
 }
 
@@ -652,24 +659,8 @@ static struct pci_driver ipc_driver = {
 	.remove = ipc_remove,
 };
 
-static int __init intel_scu_ipc_init(void)
-{
-	int platform;		/* Platform type */
-
-	platform = intel_mid_identify_cpu();
-	if (platform == 0)
-		return -ENODEV;
-	return  pci_register_driver(&ipc_driver);
-}
-
-static void __exit intel_scu_ipc_exit(void)
-{
-	pci_unregister_driver(&ipc_driver);
-}
+module_pci_driver(ipc_driver);
 
 MODULE_AUTHOR("Sreedhara DS <sreedhara.ds@intel.com>");
 MODULE_DESCRIPTION("Intel SCU IPC driver");
 MODULE_LICENSE("GPL");
-
-module_init(intel_scu_ipc_init);
-module_exit(intel_scu_ipc_exit);
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index aeb80d1c2b07..f73c29558cd3 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1204,6 +1204,8 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
 {
 	u32 real_ev = event;
 	u8 ev_type = 0;
+	int ret;
+
 	dprintk("sony_nc_notify, event: 0x%.2x\n", event);
 
 	if (event >= 0x90) {
@@ -1225,13 +1227,12 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
 		case 0x0100:
 		case 0x0127:
 			ev_type = HOTKEY;
-			real_ev = sony_nc_hotkeys_decode(event, handle);
+			ret = sony_nc_hotkeys_decode(event, handle);
 
-			if (real_ev > 0)
-				sony_laptop_report_input_event(real_ev);
-			else
-				/* restore the original event for reporting */
-				real_ev = event;
+			if (ret > 0) {
+				sony_laptop_report_input_event(ret);
+				real_ev = ret;
+			}
 
 			break;
 
diff --git a/drivers/platform/x86/toshiba-wmi.c b/drivers/platform/x86/toshiba-wmi.c
new file mode 100644
index 000000000000..feac4576b837
--- /dev/null
+++ b/drivers/platform/x86/toshiba-wmi.c
@@ -0,0 +1,138 @@
+/*
+ * toshiba_wmi.c - Toshiba WMI Hotkey Driver
+ *
+ * Copyright (C) 2015 Azael Avalos <coproscefalo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+
+MODULE_AUTHOR("Azael Avalos");
+MODULE_DESCRIPTION("Toshiba WMI Hotkey Driver");
+MODULE_LICENSE("GPL");
+
+#define TOSHIBA_WMI_EVENT_GUID	"59142400-C6A3-40FA-BADB-8A2652834100"
+
+MODULE_ALIAS("wmi:"TOSHIBA_WMI_EVENT_GUID);
+
+static struct input_dev *toshiba_wmi_input_dev;
+
+static const struct key_entry toshiba_wmi_keymap[] __initconst = {
+	/* TODO: Add keymap values once found... */
+	/*{ KE_KEY, 0x00, { KEY_ } },*/
+	{ KE_END, 0 }
+};
+
+static void toshiba_wmi_notify(u32 value, void *context)
+{
+	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = wmi_get_event_data(value, &response);
+	if (ACPI_FAILURE(status)) {
+		pr_err("Bad event status 0x%x\n", status);
+		return;
+	}
+
+	obj = (union acpi_object *)response.pointer;
+	if (!obj)
+		return;
+
+	/* TODO: Add proper checks once we have data */
+	pr_debug("Unknown event received, obj type %x\n", obj->type);
+
+	kfree(response.pointer);
+}
+
+static int __init toshiba_wmi_input_setup(void)
+{
+	acpi_status status;
+	int err;
+
+	toshiba_wmi_input_dev = input_allocate_device();
+	if (!toshiba_wmi_input_dev)
+		return -ENOMEM;
+
+	toshiba_wmi_input_dev->name = "Toshiba WMI hotkeys";
+	toshiba_wmi_input_dev->phys = "wmi/input0";
+	toshiba_wmi_input_dev->id.bustype = BUS_HOST;
+
+	err = sparse_keymap_setup(toshiba_wmi_input_dev,
+				  toshiba_wmi_keymap, NULL);
+	if (err)
+		goto err_free_dev;
+
+	status = wmi_install_notify_handler(TOSHIBA_WMI_EVENT_GUID,
+					    toshiba_wmi_notify, NULL);
+	if (ACPI_FAILURE(status)) {
+		err = -EIO;
+		goto err_free_keymap;
+	}
+
+	err = input_register_device(toshiba_wmi_input_dev);
+	if (err)
+		goto err_remove_notifier;
+
+	return 0;
+
+ err_remove_notifier:
+	wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID);
+ err_free_keymap:
+	sparse_keymap_free(toshiba_wmi_input_dev);
+ err_free_dev:
+	input_free_device(toshiba_wmi_input_dev);
+	return err;
+}
+
+static void toshiba_wmi_input_destroy(void)
+{
+	wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID);
+	sparse_keymap_free(toshiba_wmi_input_dev);
+	input_unregister_device(toshiba_wmi_input_dev);
+}
+
+static int __init toshiba_wmi_init(void)
+{
+	int ret;
+
+	if (!wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
+		return -ENODEV;
+
+	ret = toshiba_wmi_input_setup();
+	if (ret) {
+		pr_err("Failed to setup input device\n");
+		return ret;
+	}
+
+	pr_info("Toshiba WMI Hotkey Driver\n");
+
+	return 0;
+}
+
+static void __exit toshiba_wmi_exit(void)
+{
+	if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID))
+		toshiba_wmi_input_destroy();
+}
+
+module_init(toshiba_wmi_init);
+module_exit(toshiba_wmi_exit);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index f2372f400ddb..c01302989ee4 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -131,7 +131,7 @@ MODULE_LICENSE("GPL");
 /* Field definitions */
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_HOTKEY_DISABLE		0x0b
-#define HCI_HOTKEY_ENABLE		0x09
+#define HCI_HOTKEY_ENABLE		0x01
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
 #define HCI_LCD_BRIGHTNESS_SHIFT	(16-HCI_LCD_BRIGHTNESS_BITS)
@@ -198,6 +198,7 @@ struct toshiba_acpi_dev {
 	unsigned int panel_power_on_supported:1;
 	unsigned int usb_three_supported:1;
 	unsigned int sysfs_created:1;
+	unsigned int special_functions;
 
 	bool kbd_led_registered;
 	bool illumination_led_registered;
@@ -1668,10 +1669,10 @@ static ssize_t available_kbd_modes_show(struct device *dev,
 	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
 
 	if (toshiba->kbd_type == 1)
-		return sprintf(buf, "%x %x\n",
+		return sprintf(buf, "0x%x 0x%x\n",
 			       SCI_KBD_MODE_FNZ, SCI_KBD_MODE_AUTO);
 
-	return sprintf(buf, "%x %x %x\n",
+	return sprintf(buf, "0x%x 0x%x 0x%x\n",
 		       SCI_KBD_MODE_AUTO, SCI_KBD_MODE_ON, SCI_KBD_MODE_OFF);
 }
 static DEVICE_ATTR_RO(available_kbd_modes);
@@ -2253,7 +2254,16 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+	/*
+	 * Enable the "Special Functions" mode only if they are
+	 * supported and if they are activated.
+	 */
+	if (dev->kbd_function_keys_supported && dev->special_functions)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
+	else
+		result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+
 	if (result == TOS_FAILURE)
 		return -EIO;
 	else if (result == TOS_NOT_SUPPORTED)
@@ -2262,20 +2272,6 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 	return 0;
 }
 
-static void toshiba_acpi_enable_special_functions(struct toshiba_acpi_dev *dev)
-{
-	u32 result;
-
-	/*
-	 * Re-activate the hotkeys, but this time, we are using the
-	 * "Special Functions" mode.
-	 */
-	result = hci_write(dev, HCI_HOTKEY_EVENT,
-			   HCI_HOTKEY_SPECIAL_FUNCTIONS);
-	if (result != TOS_SUCCESS)
-		pr_err("Could not enable the Special Function mode\n");
-}
-
 static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str,
 				      struct serio *port)
 {
@@ -2385,8 +2381,6 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 {
 	const struct key_entry *keymap = toshiba_acpi_keymap;
 	acpi_handle ec_handle;
-	u32 events_type;
-	u32 hci_result;
 	int error;
 
 	if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) {
@@ -2398,11 +2392,9 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	if (error)
 		return error;
 
-	if (toshiba_hotkey_event_type_get(dev, &events_type))
+	if (toshiba_hotkey_event_type_get(dev, &dev->hotkey_event_type))
 		pr_notice("Unable to query Hotkey Event Type\n");
 
-	dev->hotkey_event_type = events_type;
-
 	dev->hotkey_dev = input_allocate_device();
 	if (!dev->hotkey_dev)
 		return -ENOMEM;
@@ -2411,14 +2403,15 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	dev->hotkey_dev->phys = "toshiba_acpi/input0";
 	dev->hotkey_dev->id.bustype = BUS_HOST;
 
-	if (events_type == HCI_SYSTEM_TYPE1 ||
+	if (dev->hotkey_event_type == HCI_SYSTEM_TYPE1 ||
 	    !dev->kbd_function_keys_supported)
 		keymap = toshiba_acpi_keymap;
-	else if (events_type == HCI_SYSTEM_TYPE2 ||
+	else if (dev->hotkey_event_type == HCI_SYSTEM_TYPE2 ||
 		 dev->kbd_function_keys_supported)
 		keymap = toshiba_acpi_alt_keymap;
 	else
-		pr_info("Unknown event type received %x\n", events_type);
+		pr_info("Unknown event type received %x\n",
+			dev->hotkey_event_type);
 	error = sparse_keymap_setup(dev->hotkey_dev, keymap, NULL);
 	if (error)
 		goto err_free_dev;
@@ -2449,11 +2442,8 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	 */
 	if (acpi_has_method(dev->acpi_dev->handle, "INFO"))
 		dev->info_supported = 1;
-	else {
-		hci_result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
-		if (hci_result == TOS_SUCCESS)
-			dev->system_event_supported = 1;
-	}
+	else if (hci_write(dev, HCI_SYSTEM_EVENT, 1) == TOS_SUCCESS)
+		dev->system_event_supported = 1;
 
 	if (!dev->info_supported && !dev->system_event_supported) {
 		pr_warn("No hotkey query interface found\n");
@@ -2631,7 +2621,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 {
 	struct toshiba_acpi_dev *dev;
 	const char *hci_method;
-	u32 special_functions;
 	u32 dummy;
 	int ret = 0;
 
@@ -2673,9 +2662,10 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	 * with the new keyboard layout, query for its presence to help
 	 * determine the keymap layout to use.
 	 */
-	ret = toshiba_function_keys_get(dev, &special_functions);
+	ret = toshiba_function_keys_get(dev, &dev->special_functions);
 	dev->kbd_function_keys_supported = !ret;
 
+	dev->hotkey_event_type = 0;
 	if (toshiba_acpi_setup_keyboard(dev))
 		pr_info("Unable to activate hotkeys\n");
 
@@ -2748,13 +2738,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 
 	print_supported_features(dev);
 
-	/*
-	 * Enable the "Special Functions" mode only if they are
-	 * supported and if they are activated.
-	 */
-	if (dev->kbd_function_keys_supported && special_functions)
-		toshiba_acpi_enable_special_functions(dev);
-
 	ret = sysfs_create_group(&dev->acpi_dev->dev.kobj,
 				 &toshiba_attr_group);
 	if (ret) {