diff options
| author | Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | 2014-04-15 15:50:19 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-04-16 14:36:12 -0400 |
| commit | b9d12085f2f531fdea67f0361564e0812696227c (patch) | |
| tree | a2181a720f57658e4db0789f24ec1140e2e7f228 | |
| parent | e283546c0465dd3026bc94f7b1a9de7f6b8969ec (diff) | |
| download | linux-b9d12085f2f531fdea67f0361564e0812696227c.tar.bz2 | |
net: phy: add minimal support for QSGMII PHY
This commit adds the necessary definitions for the PHY layer to
recognize "qsgmii" as a valid PHY interface. A QSMII interface, as
defined at
http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface,
is "is a method of combining four SGMII lines into a 5Gbit/s
interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX
data and a single LVDS clock signal. QSGMII uses significantly fewer
signal lines than four SGMII busses."
This type of MAC <-> PHY connection might require special handling on
the MAC driver side, so it should be possible to express this type of
MAC <-> PHY connection, for example in the Device Tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet.txt | 2 | ||||
| -rw-r--r-- | include/linux/phy.h | 3 |
2 files changed, 4 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 9ecd43d8792c..3fc360523bc9 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers: - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). - phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", + "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto standard property; - phy-connection-type: the same as "phy-mode" property but described in ePAPR; diff --git a/include/linux/phy.h b/include/linux/phy.h index 24126c4b27b5..4d0221fd0688 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -75,6 +75,7 @@ typedef enum { PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -116,6 +117,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "xgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; + case PHY_INTERFACE_MODE_QSGMII: + return "qsgmii"; default: return "unknown"; } |