diff options
author | José Roberto de Souza <jose.souza@intel.com> | 2019-08-23 01:20:47 -0700 |
---|---|---|
committer | Lucas De Marchi <lucas.demarchi@intel.com> | 2019-08-27 08:47:31 -0700 |
commit | 99389390fef50c880d2ca0b6667c12423b3d5260 (patch) | |
tree | c74262a05ec8d6f2318d2cf80b834102484d73a3 | |
parent | 9c722e17c1b91d7dc5ec77cb4fcaaa6b30653fe3 (diff) | |
download | linux-99389390fef50c880d2ca0b6667c12423b3d5260.tar.bz2 |
drm/i915/tgl: Implement TGL DisplayPort training sequence
On TGL some registers moved from DDI to transcoder and the
DisplayPort training sequence has a separate BSpec page.
I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but
it was becoming really hard to follow, so a new and cleaner function
for TGL was added with comments of all steps. It's similar to ICL,
but different enough to deserve a new function.
The rest of DisplayPort enable and the whole disable sequences
remained the same.
v2: FEC and DSC should be enabled on sink side before start link
training(Maarten reported and Manasi confirmed the DSC part)
v3: Add call to enable FEC on step 7.l(Manasi)
BSpec: 49190
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-16-lucas.demarchi@intel.com
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.c | 140 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_dp.c | 8 |
2 files changed, 140 insertions, 8 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 8eb2b3ec01ed..3180dacb5be4 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -1761,7 +1761,14 @@ void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state, I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); } -void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) +/* + * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state. + * + * Only intended to be used by intel_ddi_enable_transcoder_func() and + * intel_ddi_config_transcoder_func(). + */ +static u32 +intel_ddi_transcoder_func_reg_val_get(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); @@ -1845,6 +1852,34 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) temp |= DDI_PORT_WIDTH(crtc_state->lane_count); } + return temp; +} + +void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 temp; + + temp = intel_ddi_transcoder_func_reg_val_get(crtc_state); + I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); +} + +/* + * Same as intel_ddi_enable_transcoder_func(), but it does not set the enable + * bit. + */ +static void +intel_ddi_config_transcoder_func(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 temp; + + temp = intel_ddi_transcoder_func_reg_val_get(crtc_state); + temp &= ~TRANS_DDI_FUNC_ENABLE; I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); } @@ -3160,9 +3195,94 @@ static void intel_ddi_disable_fec_state(struct intel_encoder *encoder, POSTING_READ(DP_TP_CTL(port)); } -static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state, - const struct drm_connector_state *conn_state) +static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(dev_priv, encoder->port); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); + int level = intel_ddi_dp_level(intel_dp); + + intel_dp_set_link_params(intel_dp, crtc_state->port_clock, + crtc_state->lane_count, is_mst); + + /* 1.a got on intel_atomic_commit_tail() */ + + /* 2. */ + intel_edp_panel_on(intel_dp); + + /* + * 1.b, 3. and 4. is done before tgl_ddi_pre_enable_dp() by: + * haswell_crtc_enable()->intel_encoders_pre_pll_enable() and + * haswell_crtc_enable()->intel_enable_shared_dpll() + */ + + /* 5. */ + if (!intel_phy_is_tc(dev_priv, phy) || + dig_port->tc_mode != TC_PORT_TBT_ALT) + intel_display_power_get(dev_priv, + dig_port->ddi_io_power_domain); + + /* 6. */ + icl_program_mg_dp_mode(dig_port); + + /* + * 7.a - Steps in this function should only be executed over MST + * master, what will be taken in care by MST hook + * intel_mst_pre_enable_dp() + */ + intel_ddi_enable_pipe_clock(crtc_state); + + /* 7.b */ + intel_ddi_config_transcoder_func(crtc_state); + + /* 7.d */ + icl_disable_phy_clock_gating(dig_port); + + /* 7.e */ + icl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level, + encoder->type); + + /* 7.f */ + if (intel_phy_is_combo(dev_priv, phy)) { + bool lane_reversal = + dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL; + + intel_combo_phy_power_up_lanes(dev_priv, phy, false, + crtc_state->lane_count, + lane_reversal); + } + + /* 7.g */ + intel_ddi_init_dp_buf_reg(encoder); + + if (!is_mst) + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + + intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); + /* + * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit + * in the FEC_CONFIGURATION register to 1 before initiating link + * training + */ + intel_dp_sink_set_fec_ready(intel_dp, crtc_state); + /* 7.c, 7.h, 7.i, 7.j */ + intel_dp_start_link_train(intel_dp); + + /* 7.k */ + intel_dp_stop_link_train(intel_dp); + + /* 7.l */ + intel_ddi_enable_fec(encoder, crtc_state); + intel_dsc_enable(encoder, crtc_state); +} + +static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); @@ -3228,6 +3348,18 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, intel_dsc_enable(encoder, crtc_state); } +static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + if (INTEL_GEN(dev_priv) >= 12) + tgl_ddi_pre_enable_dp(encoder, crtc_state, conn_state); + else + hsw_ddi_pre_enable_dp(encoder, crtc_state, conn_state); +} + static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 23908da1cd5d..f74594d8d9df 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3954,13 +3954,13 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) I915_WRITE(DP_TP_CTL(port), val); /* - * On PORT_A we can have only eDP in SST mode. There the only reason - * we need to set idle transmission mode is to work around a HW issue - * where we enable the pipe while not in idle link-training mode. + * Until TGL on PORT_A we can have only eDP in SST mode. There the only + * reason we need to set idle transmission mode is to work around a HW + * issue where we enable the pipe while not in idle link-training mode. * In this case there is requirement to wait for a minimum number of * idle patterns to be sent. */ - if (port == PORT_A) + if (port == PORT_A && INTEL_GEN(dev_priv) < 12) return; if (intel_de_wait_for_set(dev_priv, DP_TP_STATUS(port), |