diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-05-24 07:58:28 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-05-24 07:58:28 -0700 |
commit | 0fed2b5cb4c04336b26b0cbf6f9a8c07081f79a6 (patch) | |
tree | a9be0f082d3c2f53eb2d5f9de9ad900c31236b34 | |
parent | 0163916f1db7f345963dad1af78b7628c759c6ee (diff) | |
parent | 41ec7ebee14189a0424176279c227168960c28ad (diff) | |
download | linux-0fed2b5cb4c04336b26b0cbf6f9a8c07081f79a6.tar.bz2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits)
sh: fix up sh7785lcr_32bit_defconfig.
arch/sh/lib/strlen.S: Checkpatch cleanup
sh: fix up sh7786 dmaengine build.
sh: guard cookie consistency across termination in the DMA driver
sh: prevent the DMA driver from unloading, while in use
sh: fix Oops in the serial SCI driver
sh: allow platforms to specify SD-card supported voltages
mmc: let MFD's provide supported Vdd card voltages to tmio_mmc
sh: disable SD-card write-protection detection on kfr2r09
mfd: pass platform flags down to the tmio_mmc driver
tmio: add a platform flag to disable card write-protection detection
sh: Add SDHI DMA support to migor
sh: Add SDHI DMA support to kfr2r09
sh: Add SDHI DMA support to ms7724se
sh: Add SDHI DMA support to ecovec
mmc: add DMA support to tmio_mmc driver, when used on SuperH
sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c
mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell
sh: add DMA slave definitions to sh7724
sh: add DMA slaves for two SDHI controllers to sh7722
...
27 files changed, 916 insertions, 207 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 62123885a6fa..49714258732e 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/interrupt.h> @@ -442,7 +443,9 @@ static void sdhi0_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sdhi0_info = { - .set_pwr = sdhi0_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .set_pwr = sdhi0_set_pwr, }; static struct resource sdhi0_resources[] = { @@ -478,7 +481,9 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sdhi1_info = { - .set_pwr = sdhi1_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .set_pwr = sdhi1_set_pwr, }; static struct resource sdhi1_resources[] = { @@ -769,6 +774,51 @@ static struct platform_device irda_device = { .resource = irda_resources, }; +#include <media/ak881x.h> +#include <media/sh_vou.h> + +struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, + .module_name = "ak881x", +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 55, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, + .archdata = { + .hwblk_id = HWBLK_VOU, + }, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -790,6 +840,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[2], &fsi_device, &irda_device, + &vou_device, }; #ifdef CONFIG_I2C @@ -1179,6 +1230,38 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + + /* AK8813 power / reset sequence */ + gpio_request(GPIO_PTG4, NULL); + gpio_request(GPIO_PTU3, NULL); + /* Reset */ + gpio_direction_output(GPIO_PTG4, 0); + /* Power down */ + gpio_direction_output(GPIO_PTU3, 1); + + udelay(10); + + /* Power up, reset */ + gpio_set_value(GPIO_PTU3, 0); + + udelay(10); + + /* Remove reset */ + gpio_set_value(GPIO_PTG4, 1); + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index b2cd0ed8664e..68994a163f6c 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -10,6 +10,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> #include <linux/mtd/physmap.h> #include <linux/mtd/onenand.h> #include <linux/delay.h> @@ -356,10 +358,19 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, +}; + static struct platform_device kfr2r09_sh_sdhi0_device = { .name = "sh_mobile_sdhi", .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), .resource = kfr2r09_sh_sdhi0_resources, + .dev = { + .platform_data = &sh7724_sdhi0_data, + }, .archdata = { .hwblk_id = HWBLK_SDHI0, }, diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 7da0fc94a01e..87185de20446 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -12,6 +12,7 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> @@ -402,10 +403,18 @@ static struct resource sdhi_cn9_resources[] = { }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, +}; + static struct platform_device sdhi_cn9_device = { .name = "sh_mobile_sdhi", .num_resources = ARRAY_SIZE(sdhi_cn9_resources), .resource = sdhi_cn9_resources, + .dev = { + .platform_data = &sh7724_sdhi_data, + }, .archdata = { .hwblk_id = HWBLK_SDHI, }, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index e74ae7b0d8bf..f9b82546c2df 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -14,6 +14,7 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> #include <linux/smc91x.h> @@ -462,11 +463,19 @@ static struct resource sdhi0_cn7_resources[] = { }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, +}; + static struct platform_device sdhi0_cn7_device = { .name = "sh_mobile_sdhi", .id = 0, .num_resources = ARRAY_SIZE(sdhi0_cn7_resources), .resource = sdhi0_cn7_resources, + .dev = { + .platform_data = &sh7724_sdhi0_data, + }, .archdata = { .hwblk_id = HWBLK_SDHI0, }, @@ -485,11 +494,19 @@ static struct resource sdhi1_cn8_resources[] = { }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi1_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, +}; + static struct platform_device sdhi1_cn8_device = { .name = "sh_mobile_sdhi", .id = 1, .num_resources = ARRAY_SIZE(sdhi1_cn8_resources), .resource = sdhi1_cn8_resources, + .dev = { + .platform_data = &sh7724_sdhi1_data, + }, .archdata = { .hwblk_id = HWBLK_SDHI1, }, @@ -515,6 +532,52 @@ static struct platform_device irda_device = { .resource = irda_resources, }; +#include <media/ak881x.h> +#include <media/sh_vou.h> + +struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + /* With open J18 jumper address is 0x21 */ + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, + .module_name = "ak881x", +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 55, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, + .archdata = { + .hwblk_id = HWBLK_VOU, + }, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -530,6 +593,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { &sdhi0_cn7_device, &sdhi1_cn8_device, &irda_device, + &vou_device, }; /* I2C device */ @@ -614,6 +678,7 @@ static int __init devices_setup(void) { u16 sw = __raw_readw(SW4140); /* select camera, monitor */ struct clk *clk; + u16 fpga_out; /* register board specific self-refresh code */ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | @@ -623,14 +688,26 @@ static int __init devices_setup(void) &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); /* Reset Release */ - __raw_writew(__raw_readw(FPGA_OUT) & - ~((1 << 1) | /* LAN */ - (1 << 6) | /* VIDEO DAC */ - (1 << 7) | /* AK4643 */ - (1 << 8) | /* IrDA */ - (1 << 12) | /* USB0 */ - (1 << 14)), /* RMII */ - FPGA_OUT); + fpga_out = __raw_readw(FPGA_OUT); + /* bit4: NTSC_PDN, bit5: NTSC_RESET */ + fpga_out &= ~((1 << 1) | /* LAN */ + (1 << 4) | /* AK8813 PDN */ + (1 << 5) | /* AK8813 RESET */ + (1 << 6) | /* VIDEO DAC */ + (1 << 7) | /* AK4643 */ + (1 << 8) | /* IrDA */ + (1 << 12) | /* USB0 */ + (1 << 14)); /* RMII */ + __raw_writew(fpga_out | (1 << 4), FPGA_OUT); + + udelay(10); + + /* AK8813 RESET */ + __raw_writew(fpga_out | (1 << 5), FPGA_OUT); + + udelay(10); + + __raw_writew(fpga_out, FPGA_OUT); /* turn on USB clocks, use external clock */ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); @@ -862,6 +939,20 @@ static int __init devices_setup(void) lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; } + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + return platform_add_devices(ms7724se_devices, ARRAY_SIZE(ms7724se_devices)); } diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig index e9af616b2160..71f39c71b04b 100644 --- a/arch/sh/configs/sh7785lcr_32bit_defconfig +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.34-rc5 -# Tue May 18 17:22:09 2010 +# Linux kernel version: 2.6.34 +# Mon May 24 08:33:02 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -76,7 +76,7 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -111,18 +111,17 @@ CONFIG_PERF_USE_VMALLOC=y # CONFIG_PERF_EVENTS=y CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -CONFIG_COMPAT_BRK=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_OPROFILE=y +# CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_KRETPROBES=y +# CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y @@ -130,6 +129,7 @@ CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y # # GCOV-based kernel profiling @@ -243,8 +243,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x40000000 CONFIG_MEMORY_SIZE=0x20000000 -CONFIG_29BIT=y -# CONFIG_PMB is not set +# CONFIG_29BIT is not set +CONFIG_32BIT=y +CONFIG_PMB=y CONFIG_X2TLB=y CONFIG_VSYSCALL=y # CONFIG_NUMA is not set @@ -262,9 +263,9 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set -# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +CONFIG_HUGETLB_PAGE_SIZE_1MB=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set # CONFIG_HUGETLB_PAGE_SIZE_512MB is not set @@ -276,7 +277,7 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_MEMORY_HOTPLUG is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -298,7 +299,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y -# CONFIG_SPECULATIVE_EXECUTION is not set +CONFIG_SPECULATIVE_EXECUTION=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_FPU=y @@ -308,7 +309,7 @@ CONFIG_CPU_HAS_FPU=y # # CONFIG_SH_HIGHLANDER is not set CONFIG_SH_SH7785LCR=y -CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y +# CONFIG_SH_SH7785LCR_PT is not set # # Timer and clock configuration @@ -371,7 +372,7 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y -# CONFIG_INTC_USERIMASK is not set +CONFIG_INTC_USERIMASK=y # # Boot options @@ -389,6 +390,7 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -465,6 +467,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +# CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set @@ -485,8 +488,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -499,11 +500,20 @@ CONFIG_WIRELESS=y # # CFG80211 needs to be enabled for MAC80211 # + +# +# Some wireless drivers require a rate control algorithm +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # +# CAIF Support +# +# CONFIG_CAIF is not set + +# # Device Drivers # @@ -514,7 +524,11 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -537,6 +551,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -668,7 +683,9 @@ CONFIG_ATA=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_INIC162X is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -683,7 +700,6 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -753,8 +769,36 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_NET_ETHERNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set +# CONFIG_SMC91X is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -836,6 +880,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set @@ -884,6 +929,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set # @@ -901,6 +947,8 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set @@ -1071,7 +1119,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set +CONFIG_FB_KYRO=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set @@ -1097,15 +1145,15 @@ CONFIG_FB_SM501=y # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_SUPERH_MONO=y CONFIG_LOGO_SUPERH_VGA16=y CONFIG_LOGO_SUPERH_CLUT224=y @@ -1129,15 +1177,18 @@ CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_DEBUG_VERBOSE=y +CONFIG_SND_VMASTER=y CONFIG_SND_RAWMIDI_SEQ=y CONFIG_SND_OPL3_LIB_SEQ=y # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set -# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_EMU10K1_SEQ=y CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y +CONFIG_SND_AC97_CODEC=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set @@ -1172,7 +1223,7 @@ CONFIG_SND_CMIPCI=y # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_EMU10K1 is not set +CONFIG_SND_EMU10K1=y # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -1211,6 +1262,7 @@ CONFIG_SND_USB=y # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set @@ -1226,44 +1278,42 @@ CONFIG_USB_HID=y # Special HID drivers # # CONFIG_HID_3M_PCT is not set -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -# CONFIG_DRAGONRISE_FF is not set -CONFIG_HID_EZKEY=m -CONFIG_HID_KYE=m -CONFIG_HID_GYRATION=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LOGITECH=m -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -# CONFIG_LOGIG940_FF is not set -CONFIG_HID_MICROSOFT=m +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CANDO is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EGALAX is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MOSART is not set -CONFIG_HID_MONTEREY=m -CONFIG_HID_NTRIG=m +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set -CONFIG_HID_PANTHERLORD=m -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=m +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set # CONFIG_HID_QUANTA is not set -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m +# CONFIG_HID_ROCCAT_KONE is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set # CONFIG_HID_STANTUM is not set -CONFIG_HID_SUNPLUS=m -CONFIG_HID_GREENASIA=m -# CONFIG_GREENASIA_FF is not set -CONFIG_HID_SMARTJOYPLUS=m -# CONFIG_SMARTJOYPLUS_FF is not set -CONFIG_HID_TOPSEED=m +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set -CONFIG_HID_ZEROPLUS=m -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1276,9 +1326,8 @@ CONFIG_USB=y # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set @@ -1290,9 +1339,7 @@ CONFIG_USB_DEVICE_CLASS=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set @@ -1361,7 +1408,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set @@ -1464,6 +1510,7 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_TIMB_DMA is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=m # CONFIG_UIO_CIF is not set @@ -1473,10 +1520,6 @@ CONFIG_UIO=m # CONFIG_UIO_SERCOS3 is not set # CONFIG_UIO_PCI_GENERIC is not set # CONFIG_UIO_NETX is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -1653,63 +1696,75 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y -CONFIG_TRACE_IRQFLAGS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_KMEMLEAK=y +CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400 +# CONFIG_DEBUG_KMEMLEAK_TEST is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE_NMI_ENTER=y +# CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_RING_BUFFER=y -CONFIG_FTRACE_NMI_ENTER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -CONFIG_IRQSOFF_TRACER=y -# CONFIG_PREEMPT_TRACER is not set -CONFIG_SCHED_TRACER=y -# CONFIG_FTRACE_SYSCALLS is not set -# CONFIG_BOOT_TRACER is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_KSYM_TRACER is not set -CONFIG_STACK_TRACER=y -CONFIG_KMEMTRACE=y -CONFIG_WORKQUEUE_TRACER=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_DYNAMIC_FTRACE=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_DWARF_UNWINDER=y -CONFIG_MCOUNT=y +# CONFIG_STACK_DEBUG is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +CONFIG_DUMP_CODE=y +# CONFIG_DWARF_UNWINDER is not set +# CONFIG_SH_NO_BSS_INIT is not set # # Security options @@ -1820,7 +1875,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_VIRTUALIZATION is not set -CONFIG_BINARY_PRINTF=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/include/asm/dmaengine.h b/arch/sh/include/asm/dmaengine.h deleted file mode 100644 index 2a02b611a9ad..000000000000 --- a/arch/sh/include/asm/dmaengine.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Header for the new SH dmaengine driver - * - * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASM_DMAENGINE_H -#define ASM_DMAENGINE_H - -#include <linux/sh_dma.h> - -enum { - SHDMA_SLAVE_SCIF0_TX, - SHDMA_SLAVE_SCIF0_RX, - SHDMA_SLAVE_SCIF1_TX, - SHDMA_SLAVE_SCIF1_RX, - SHDMA_SLAVE_SCIF2_TX, - SHDMA_SLAVE_SCIF2_RX, - SHDMA_SLAVE_SCIF3_TX, - SHDMA_SLAVE_SCIF3_RX, - SHDMA_SLAVE_SCIF4_TX, - SHDMA_SLAVE_SCIF4_RX, - SHDMA_SLAVE_SCIF5_TX, - SHDMA_SLAVE_SCIF5_RX, - SHDMA_SLAVE_SIUA_TX, - SHDMA_SLAVE_SIUA_RX, - SHDMA_SLAVE_SIUB_TX, - SHDMA_SLAVE_SIUB_RX, -}; - -#endif diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h index e8d4142baf59..1d95c78808d1 100644 --- a/arch/sh/include/asm/siu.h +++ b/arch/sh/include/asm/siu.h @@ -11,8 +11,6 @@ #ifndef ASM_SIU_H #define ASM_SIU_H -#include <asm/dmaengine.h> - struct device; struct siu_platform { diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 48560407cbe1..7a5b8a331b4a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -235,4 +235,19 @@ enum { HWBLK_NR, }; +enum { + SHDMA_SLAVE_SCIF0_TX, + SHDMA_SLAVE_SCIF0_RX, + SHDMA_SLAVE_SCIF1_TX, + SHDMA_SLAVE_SCIF1_RX, + SHDMA_SLAVE_SCIF2_TX, + SHDMA_SLAVE_SCIF2_RX, + SHDMA_SLAVE_SIUA_TX, + SHDMA_SLAVE_SIUA_RX, + SHDMA_SLAVE_SIUB_TX, + SHDMA_SLAVE_SIUB_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI0_RX, +}; + #endif /* __ASM_SH7722_H__ */ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 0cd1f71a1116..fbbf550cc529 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -283,4 +283,23 @@ enum { HWBLK_NR, }; +enum { + SHDMA_SLAVE_SCIF0_TX, + SHDMA_SLAVE_SCIF0_RX, + SHDMA_SLAVE_SCIF1_TX, + SHDMA_SLAVE_SCIF1_RX, + SHDMA_SLAVE_SCIF2_TX, + SHDMA_SLAVE_SCIF2_RX, + SHDMA_SLAVE_SCIF3_TX, + SHDMA_SLAVE_SCIF3_RX, + SHDMA_SLAVE_SCIF4_TX, + SHDMA_SLAVE_SCIF4_RX, + SHDMA_SLAVE_SCIF5_TX, + SHDMA_SLAVE_SCIF5_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI1_RX, +}; + #endif /* __ASM_SH7724_H__ */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c index 105a6d41b569..597c9fbe49c6 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/clk.h> #include <asm/clkdev.h> #include <asm/clock.h> #include <asm/freq.h> diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 24c6167a7181..156ccc960015 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -17,7 +17,6 @@ #include <linux/usb/m66592.h> #include <asm/clock.h> -#include <asm/dmaengine.h> #include <asm/mmzone.h> #include <asm/siu.h> @@ -75,6 +74,16 @@ static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = { .addr = 0xa454c094, .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xb6, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0x04ce0030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0x04ce0030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, }, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 89fe16d20fdb..79c556e56262 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -18,19 +18,103 @@ #include <linux/mm.h> #include <linux/serial_sci.h> #include <linux/uio_driver.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> #include <linux/io.h> #include <linux/notifier.h> #include <asm/suspend.h> #include <asm/clock.h> -#include <asm/dmaengine.h> #include <asm/mmzone.h> #include <cpu/dma-register.h> #include <cpu/sh7724.h> /* DMA */ +static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = { + { + .slave_id = SHDMA_SLAVE_SCIF0_TX, + .addr = 0xffe0000c, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x21, + }, { + .slave_id = SHDMA_SLAVE_SCIF0_RX, + .addr = 0xffe00014, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x22, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_TX, + .addr = 0xffe1000c, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x25, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_RX, + .addr = 0xffe10014, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x26, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_TX, + .addr = 0xffe2000c, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x29, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_RX, + .addr = 0xffe20014, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2a, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_TX, + .addr = 0xa4e30020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2d, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_RX, + .addr = 0xa4e30024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x2e, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_TX, + .addr = 0xa4e40020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x31, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_RX, + .addr = 0xa4e40024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x32, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_TX, + .addr = 0xa4e50020, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x35, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_RX, + .addr = 0xa4e50024, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .mid_rid = 0x36, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0x04ce0030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0x04ce0030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_TX, + .addr = 0x04cf0030, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc9, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_RX, + .addr = 0x04cf0030, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xca, + }, +}; + static const struct sh_dmae_channel sh7724_dmae_channels[] = { { .offset = 0, @@ -62,6 +146,8 @@ static const struct sh_dmae_channel sh7724_dmae_channels[] = { static const unsigned int ts_shift[] = TS_SHIFT; static struct sh_dmae_pdata dma_platform_data = { + .slave = sh7724_dmae_slaves, + .slave_num = ARRAY_SIZE(sh7724_dmae_slaves), .channel = sh7724_dmae_channels, .channel_num = ARRAY_SIZE(sh7724_dmae_channels), .ts_low_shift = CHCR_TS_LOW_SHIFT, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index b12f537e4dde..0f414864f76b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -12,10 +12,9 @@ #include <linux/serial.h> #include <linux/io.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> -#include <asm/dmaengine.h> - #include <cpu/dma-register.h> static struct plat_sci_port scif0_platform_data = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index f3e3ea0ce050..c9a572bc6dc8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -13,9 +13,9 @@ #include <linux/serial_sci.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> -#include <asm/dmaengine.h> #include <asm/mmzone.h> #include <cpu/dma-register.h> diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 81657091da46..8797723231ea 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -21,10 +21,10 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> #include <linux/sh_timer.h> +#include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <cpu/dma-register.h> #include <asm/mmzone.h> -#include <asm/dmaengine.h> static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffea0000, diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 5ec1d1818691..886d7d83ace3 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -845,8 +845,10 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len, rb_link_node(&cie->node, parent, rb_node); rb_insert_color(&cie->node, &cie_root); +#ifdef CONFIG_MODULES if (mod != NULL) list_add_tail(&cie->link, &mod->arch.cie_list); +#endif spin_unlock_irqrestore(&dwarf_cie_lock, flags); @@ -935,8 +937,10 @@ static int dwarf_parse_fde(void *entry, u32 entry_type, rb_link_node(&fde->node, parent, rb_node); rb_insert_color(&fde->node, &fde_root); +#ifdef CONFIG_MODULES if (mod != NULL) list_add_tail(&fde->link, &mod->arch.fde_list); +#endif spin_unlock_irqrestore(&dwarf_fde_lock, flags); diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S index f8ab296047b3..1bcc13f05962 100644 --- a/arch/sh/lib/strlen.S +++ b/arch/sh/lib/strlen.S @@ -35,7 +35,7 @@ ENTRY(strlen) mov.b @r4+,r1 tst r1,r1 bt 8f - add #1,r2 + add #1,r2 1: mov #0,r3 diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index a1727522343e..a2a519fd2a24 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -722,6 +722,10 @@ static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all) { while (__ld_cleanup(sh_chan, all)) ; + + if (all) + /* Terminating - forgive uncompleted cookies */ + sh_chan->completed_cookie = sh_chan->common.cookie; } static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) @@ -1188,6 +1192,7 @@ static struct platform_driver sh_dmae_driver = { .remove = __exit_p(sh_dmae_remove), .shutdown = sh_dmae_shutdown, .driver = { + .owner = THIS_MODULE, .name = "sh-dma-engine", }, }; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de3e74cde51c..3c6a9860dd9c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -49,6 +49,7 @@ config MFD_SH_MOBILE_SDHI bool "Support for SuperH Mobile SDHI" depends on SUPERH || ARCH_SHMOBILE select MFD_CORE + select TMIO_MMC_DMA ---help--- This driver supports the SDHI hardware block found in many SuperH Mobile SoCs. @@ -162,6 +163,11 @@ config MFD_TMIO bool default n +config TMIO_MMC_DMA + bool + select DMA_ENGINE + select DMADEVICES + config MFD_T7L66XB bool "Support Toshiba T7L66XB" depends on ARM && HAVE_CLK diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c index 497f91b6138e..cd164595f08a 100644 --- a/drivers/mfd/sh_mobile_sdhi.c +++ b/drivers/mfd/sh_mobile_sdhi.c @@ -26,11 +26,15 @@ #include <linux/mfd/core.h> #include <linux/mfd/tmio.h> #include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/sh_dma.h> struct sh_mobile_sdhi { struct clk *clk; struct tmio_mmc_data mmc_data; struct mfd_cell cell_mmc; + struct sh_dmae_slave param_tx; + struct sh_dmae_slave param_rx; + struct tmio_mmc_dma dma_priv; }; static struct resource sh_mobile_sdhi_resources[] = { @@ -64,6 +68,8 @@ static void sh_mobile_sdhi_set_pwr(struct platform_device *tmio, int state) static int __init sh_mobile_sdhi_probe(struct platform_device *pdev) { struct sh_mobile_sdhi *priv; + struct tmio_mmc_data *mmc_data; + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; struct resource *mem; char clk_name[8]; int ret, irq; @@ -85,6 +91,8 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev) return -ENOMEM; } + mmc_data = &priv->mmc_data; + snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id); priv->clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(priv->clk)) { @@ -96,12 +104,24 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev) clk_enable(priv->clk); - priv->mmc_data.hclk = clk_get_rate(priv->clk); - priv->mmc_data.set_pwr = sh_mobile_sdhi_set_pwr; - priv->mmc_data.capabilities = MMC_CAP_MMC_HIGHSPEED; + mmc_data->hclk = clk_get_rate(priv->clk); + mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; + mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; + if (p) { + mmc_data->flags = p->tmio_flags; + mmc_data->ocr_mask = p->tmio_ocr_mask; + } + + if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { + priv->param_tx.slave_id = p->dma_slave_tx; + priv->param_rx.slave_id = p->dma_slave_rx; + priv->dma_priv.chan_priv_tx = &priv->param_tx; + priv->dma_priv.chan_priv_rx = &priv->param_rx; + mmc_data->dma = &priv->dma_priv; + } memcpy(&priv->cell_mmc, &sh_mobile_sdhi_cell, sizeof(priv->cell_mmc)); - priv->cell_mmc.driver_data = &priv->mmc_data; + priv->cell_mmc.driver_data = mmc_data; priv->cell_mmc.platform_data = &priv->cell_mmc; priv->cell_mmc.data_size = sizeof(priv->cell_mmc); diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index b2b577f6afd4..883fcac21004 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -29,6 +29,7 @@ #include <linux/irq.h> #include <linux/device.h> #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/mmc/host.h> #include <linux/mfd/core.h> #include <linux/mfd/tmio.h> @@ -131,8 +132,8 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) host->cmd = cmd; -/* FIXME - this seems to be ok comented out but the spec suggest this bit should - * be set when issuing app commands. +/* FIXME - this seems to be ok commented out but the spec suggest this bit + * should be set when issuing app commands. * if(cmd->flags & MMC_FLAG_ACMD) * c |= APP_CMD; */ @@ -155,12 +156,12 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) return 0; } -/* This chip always returns (at least?) as much data as you ask for. +/* + * This chip always returns (at least?) as much data as you ask for. * I'm unsure what happens if you ask for less than a block. This should be * looked into to ensure that a funny length read doesnt hose the controller. - * */ -static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) +static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; unsigned short *buf; @@ -180,7 +181,7 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) count = data->blksz; pr_debug("count: %08x offset: %08x flags %08x\n", - count, host->sg_off, data->flags); + count, host->sg_off, data->flags); /* Transfer the data */ if (data->flags & MMC_DATA_READ) @@ -198,7 +199,7 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) return; } -static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) +static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; struct mmc_command *stop; @@ -206,7 +207,7 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) host->data = NULL; if (!data) { - pr_debug("Spurious data end IRQ\n"); + dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); return; } stop = data->stop; @@ -219,7 +220,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) pr_debug("Completed data request\n"); - /*FIXME - other drivers allow an optional stop command of any given type + /* + * FIXME: other drivers allow an optional stop command of any given type * which we dont do, as the chip can auto generate them. * Perhaps we can be smarter about when to use auto CMD12 and * only issue the auto request when we know this is the desired @@ -227,10 +229,17 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) * upper layers expect. For now, we do what works. */ - if (data->flags & MMC_DATA_READ) - disable_mmc_irqs(host, TMIO_MASK_READOP); - else - disable_mmc_irqs(host, TMIO_MASK_WRITEOP); + if (data->flags & MMC_DATA_READ) { + if (!host->chan_rx) + disable_mmc_irqs(host, TMIO_MASK_READOP); + dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", + host->mrq); + } else { + if (!host->chan_tx) + disable_mmc_irqs(host, TMIO_MASK_WRITEOP); + dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", + host->mrq); + } if (stop) { if (stop->opcode == 12 && !stop->arg) @@ -242,7 +251,35 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) tmio_mmc_finish_request(host); } -static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, +static void tmio_mmc_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + + if (!data) + return; + + if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) { + /* + * Has all data been written out yet? Testing on SuperH showed, + * that in most cases the first interrupt comes already with the + * BUSY status bit clear, but on some operations, like mount or + * in the beginning of a write / sync / umount, there is one + * DATAEND interrupt with the BUSY bit set, in this cases + * waiting for one more interrupt fixes the problem. + */ + if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { + disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } + } else if (host->chan_rx && (data->flags & MMC_DATA_READ)) { + disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } else { + tmio_mmc_do_data_irq(host); + } +} + +static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_command *cmd = host->cmd; @@ -282,10 +319,16 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, * If theres no data or we encountered an error, finish now. */ if (host->data && !cmd->error) { - if (host->data->flags & MMC_DATA_READ) - enable_mmc_irqs(host, TMIO_MASK_READOP); - else - enable_mmc_irqs(host, TMIO_MASK_WRITEOP); + if (host->data->flags & MMC_DATA_READ) { + if (!host->chan_rx) + enable_mmc_irqs(host, TMIO_MASK_READOP); + } else { + struct dma_chan *chan = host->chan_tx; + if (!chan) + enable_mmc_irqs(host, TMIO_MASK_WRITEOP); + else + tasklet_schedule(&host->dma_issue); + } } else { tmio_mmc_finish_request(host); } @@ -293,7 +336,6 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, return; } - static irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; @@ -311,7 +353,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) if (!ireg) { disable_mmc_irqs(host, status & ~irq_mask); - pr_debug("tmio_mmc: Spurious irq, disabling! " + pr_warning("tmio_mmc: Spurious irq, disabling! " "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); pr_debug_status(status); @@ -363,16 +405,265 @@ out: return IRQ_HANDLED; } +#ifdef CONFIG_TMIO_MMC_DMA +static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) +{ +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) + /* Switch DMA mode on or off - SuperH specific? */ + sd_ctrl_write16(host, 0xd8, enable ? 2 : 0); +#endif +} + +static void tmio_dma_complete(void *arg) +{ + struct tmio_mmc_host *host = arg; + + dev_dbg(&host->pdev->dev, "Command completed\n"); + + if (!host->data) + dev_warn(&host->pdev->dev, "NULL data in DMA completion!\n"); + else + enable_mmc_irqs(host, TMIO_STAT_DATAEND); +} + +static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_rx; + int ret; + + ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE); + if (ret > 0) { + host->dma_sglen = ret; + desc = chan->device->device_prep_slave_sg(chan, sg, ret, + DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + host->desc = desc; + desc->callback = tmio_dma_complete; + desc->callback_param = host; + host->cookie = desc->tx_submit(desc); + if (host->cookie < 0) { + host->desc = NULL; + ret = host->cookie; + } else { + chan->device->device_issue_pending(chan); + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, host->cookie, host->mrq); + + if (!host->desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_rx = NULL; + dma_release_channel(chan); + /* Free the Tx channel too */ + chan = host->chan_tx; + if (chan) { + host->chan_tx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + tmio_mmc_enable_dma(host, false); + reset(host); + /* Fail this request, let above layers recover */ + host->mrq->cmd->error = ret; + tmio_mmc_finish_request(host); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, + desc, host->cookie, host->sg_len); + + return ret > 0 ? 0 : ret; +} + +static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_tx; + int ret; + + ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE); + if (ret > 0) { + host->dma_sglen = ret; + desc = chan->device->device_prep_slave_sg(chan, sg, ret, + DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + host->desc = desc; + desc->callback = tmio_dma_complete; + desc->callback_param = host; + host->cookie = desc->tx_submit(desc); + if (host->cookie < 0) { + host->desc = NULL; + ret = host->cookie; + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, host->cookie, host->mrq); + + if (!host->desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_tx = NULL; + dma_release_channel(chan); + /* Free the Rx channel too */ + chan = host->chan_rx; + if (chan) { + host->chan_rx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + tmio_mmc_enable_dma(host, false); + reset(host); + /* Fail this request, let above layers recover */ + host->mrq->cmd->error = ret; + tmio_mmc_finish_request(host); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, + desc, host->cookie); + + return ret > 0 ? 0 : ret; +} + +static int tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx) + return tmio_mmc_start_dma_rx(host); + } else { + if (host->chan_tx) + return tmio_mmc_start_dma_tx(host); + } + + return 0; +} + +static void tmio_issue_tasklet_fn(unsigned long priv) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; + struct dma_chan *chan = host->chan_tx; + + chan->device->device_issue_pending(chan); +} + +static void tmio_tasklet_fn(unsigned long arg) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; + + if (host->data->flags & MMC_DATA_READ) + dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, + DMA_FROM_DEVICE); + else + dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, + DMA_TO_DEVICE); + + tmio_mmc_do_data_irq(host); +} + +/* It might be necessary to make filter MFD specific */ +static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) +{ + dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg); + chan->private = arg; + return true; +} + +static void tmio_mmc_request_dma(struct tmio_mmc_host *host, + struct tmio_mmc_data *pdata) +{ + host->cookie = -EINVAL; + host->desc = NULL; + + /* We can only either use DMA for both Tx and Rx or not use it at all */ + if (pdata->dma) { + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->chan_tx = dma_request_channel(mask, tmio_mmc_filter, + pdata->dma->chan_priv_tx); + dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, + host->chan_tx); + + if (!host->chan_tx) + return; + + host->chan_rx = dma_request_channel(mask, tmio_mmc_filter, + pdata->dma->chan_priv_rx); + dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, + host->chan_rx); + + if (!host->chan_rx) { + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; + return; + } + + tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host); + tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host); + + tmio_mmc_enable_dma(host, true); + } +} + +static void tmio_mmc_release_dma(struct tmio_mmc_host *host) +{ + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } + + host->cookie = -EINVAL; + host->desc = NULL; +} +#else +static int tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + return 0; +} + +static void tmio_mmc_request_dma(struct tmio_mmc_host *host, + struct tmio_mmc_data *pdata) +{ + host->chan_tx = NULL; + host->chan_rx = NULL; +} + +static void tmio_mmc_release_dma(struct tmio_mmc_host *host) +{ +} +#endif + static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", - data->blksz, data->blocks); + data->blksz, data->blocks); /* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */ if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { - printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n", - mmc_hostname(host->mmc), data->blksz); + pr_err("%s: %d byte block unsupported in 4 bit mode\n", + mmc_hostname(host->mmc), data->blksz); return -EINVAL; } @@ -383,7 +674,7 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host, sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); - return 0; + return tmio_mmc_start_dma(host, data); } /* Process requests from the MMC layer */ @@ -404,7 +695,6 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) } ret = tmio_mmc_start_command(host, mrq->cmd); - if (!ret) return; @@ -458,11 +748,14 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static int tmio_mmc_get_ro(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; - return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1; + return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1; } -static struct mmc_host_ops tmio_mmc_ops = { +static const struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, @@ -515,6 +808,7 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) struct tmio_mmc_host *host; struct mmc_host *mmc; int ret = -EINVAL; + u32 irq_mask = TMIO_MASK_CMD; if (dev->num_resources != 2) goto out; @@ -553,7 +847,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) mmc->caps |= pdata->capabilities; mmc->f_max = pdata->hclk; mmc->f_min = mmc->f_max / 512; - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + if (pdata->ocr_mask) + mmc->ocr_avail = pdata->ocr_mask; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { @@ -578,13 +875,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (ret) goto cell_disable; + /* See if we also get DMA */ + tmio_mmc_request_dma(host, pdata); + mmc_add_host(mmc); - printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), - (unsigned long)host->ctl, host->irq); + pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), + (unsigned long)host->ctl, host->irq); /* Unmask the IRQs we want to know about */ - enable_mmc_irqs(host, TMIO_MASK_IRQ); + if (!host->chan_rx) + irq_mask |= TMIO_MASK_READOP; + if (!host->chan_tx) + irq_mask |= TMIO_MASK_WRITEOP; + enable_mmc_irqs(host, irq_mask); return 0; @@ -609,6 +913,7 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev) if (mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); mmc_remove_host(mmc); + tmio_mmc_release_dma(host); free_irq(host->irq, host); if (cell->disable) cell->disable(dev); diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index dafecfbcd91a..64f7d5dfc106 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -10,6 +10,8 @@ */ #include <linux/highmem.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> #define CTL_SD_CMD 0x00 #define CTL_ARG_REG 0x04 @@ -106,6 +108,17 @@ struct tmio_mmc_host { unsigned int sg_off; struct platform_device *pdev; + + /* DMA support */ + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + struct tasklet_struct dma_complete; + struct tasklet_struct dma_issue; +#ifdef CONFIG_TMIO_MMC_DMA + struct dma_async_tx_descriptor *desc; + unsigned int dma_sglen; + dma_cookie_t cookie; +#endif }; #include <linux/io.h> diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 4f73fb756745..5f90fcd7d107 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1004,8 +1004,9 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) s->chan_rx = NULL; s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; dma_release_channel(chan); - dma_free_coherent(port->dev, s->buf_len_rx * 2, - sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); + if (sg_dma_address(&s->sg_rx[0])) + dma_free_coherent(port->dev, s->buf_len_rx * 2, + sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); if (enable_pio) sci_start_rx(port); } diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h index 3bcd7163485c..49067802a6d7 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mfd/sh_mobile_sdhi.h @@ -1,7 +1,13 @@ #ifndef __SH_MOBILE_SDHI_H__ #define __SH_MOBILE_SDHI_H__ +#include <linux/types.h> + struct sh_mobile_sdhi_info { + int dma_slave_tx; + int dma_slave_rx; + unsigned long tmio_flags; + u32 tmio_ocr_mask; /* available MMC voltages */ void (*set_pwr)(struct platform_device *pdev, int state); }; diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index c3f7dff8effc..f07425bc3dcd 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -50,17 +50,28 @@ tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \ } while (0) +/* tmio MMC platform flags */ +#define TMIO_MMC_WRPROTECT_DISABLE (1 << 0) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); +struct tmio_mmc_dma { + void *chan_priv_tx; + void *chan_priv_rx; +}; + /* * data for the MMC controller */ struct tmio_mmc_data { unsigned int hclk; unsigned long capabilities; + unsigned long flags; + u32 ocr_mask; /* available voltages */ + struct tmio_mmc_dma *dma; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); }; diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h index c0bfab8fed3d..492b1cae24cc 100644 --- a/sound/soc/sh/siu.h +++ b/sound/soc/sh/siu.h @@ -71,8 +71,7 @@ struct siu_firmware { #include <linux/dmaengine.h> #include <linux/interrupt.h> #include <linux/io.h> - -#include <asm/dmaengine.h> +#include <linux/sh_dma.h> #include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c index 8f85719212f9..36170be15aa7 100644 --- a/sound/soc/sh/siu_pcm.c +++ b/sound/soc/sh/siu_pcm.c @@ -31,7 +31,6 @@ #include <sound/pcm_params.h> #include <sound/soc-dai.h> -#include <asm/dmaengine.h> #include <asm/siu.h> #include "siu.h" @@ -358,13 +357,13 @@ static int siu_pcm_open(struct snd_pcm_substream *ss) if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) { siu_stream = &port_info->playback; param = &siu_stream->param; - param->slave_id = port ? SHDMA_SLAVE_SIUB_TX : - SHDMA_SLAVE_SIUA_TX; + param->slave_id = port ? pdata->dma_slave_tx_b : + pdata->dma_slave_tx_a; } else { siu_stream = &port_info->capture; param = &siu_stream->param; - param->slave_id = port ? SHDMA_SLAVE_SIUB_RX : - SHDMA_SLAVE_SIUA_RX; + param->slave_id = port ? pdata->dma_slave_rx_b : + pdata->dma_slave_rx_a; } param->dma_dev = pdata->dma_dev; |