summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRichard Röjfors <richard.rojfors.ext@mocean-labs.com>2009-06-05 15:40:32 +0200
committerBen Dooks <ben-linux@fluff.org>2009-06-13 10:39:28 +0100
commitdd14be4c274fc484eccace03ae9726e516630331 (patch)
tree3b8cfb3a060b9f1232d37de749b82c659248e8c5
parent7d85ccd816535f56880f7dfdb4de056794376b2c (diff)
downloadlinux-dd14be4c274fc484eccace03ae9726e516630331.tar.bz2
i2c-ocores: Can add I2C devices to the bus
There is sometimes a need for the ocores driver to add devices to the bus when installed. i2c_register_board_info can not always be used, because the I2C devices are not known at an early state, they could for instance be connected on a I2C bus on a PCI device which has the Open Cores IP. i2c_new_device can not be used in all cases either since the resulting bus nummer might be unknown. The solution is the pass a list of I2C devices in the platform data to the Open Cores driver. This is useful for MFD drivers. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-rw-r--r--Documentation/i2c/busses/i2c-ocores17
-rw-r--r--drivers/i2c/busses/i2c-ocores.c5
-rw-r--r--include/linux/i2c-ocores.h2
3 files changed, 24 insertions, 0 deletions
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index cfcebb10d14e..c269aaa2f26a 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The
dev.platform_data of the device should also point to a struct
ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
distance between registers and the input clock speed.
+There is also a possibility to attach a list of i2c_board_info which
+the i2c-ocores driver will add to the bus upon creation.
E.G. something like:
@@ -36,9 +38,24 @@ static struct resource ocores_resources[] = {
},
};
+/* optional board info */
+struct i2c_board_info ocores_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tsc2003", 0x48),
+ .platform_data = &tsc2003_platform_data,
+ .irq = TSC_IRQ
+ },
+ {
+ I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+ .irq = ADV_IRQ
+ }
+};
+
static struct ocores_i2c_platform_data myi2c_data = {
.regstep = 2, /* two bytes between registers */
.clock_khz = 50000, /* input clock of 50MHz */
+ .devices = ocores_i2c_board_info, /* optional table of devices */
+ .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */
};
static struct platform_device myi2c = {
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e5193bf75483..3542c6ba98f1 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -216,6 +216,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
struct ocores_i2c_platform_data *pdata;
struct resource *res, *res2;
int ret;
+ int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -271,6 +272,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
goto add_adapter_failed;
}
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+
return 0;
add_adapter_failed:
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 8ed591b0887e..4d5e57ff6614 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -14,6 +14,8 @@
struct ocores_i2c_platform_data {
u32 regstep; /* distance between registers */
u32 clock_khz; /* input clock in kHz */
+ u8 num_devices; /* number of devices in the devices list */
+ struct i2c_board_info const *devices; /* devices connected to the bus */
};
#endif /* _LINUX_I2C_OCORES_H */